USGS Science⌕ Search

SEARCH · USGS Science

Results for “Mining, Metallurgy and Exploration”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

1,691 records · Page 51Linked to original sources
USGS2026

Tectonically driven integration of the 4.8 Ma Colorado River USA tracked with detrital sanidine and fish genetics

The development of the continental-scale Colorado River system, western USA, from 8 to 4.8 Ma, is revealed using 60-40 Ma detrital sanidine tracer grains and fish phylogeny. Here we show that precursor paleoriver segments became integrated north to south as traced by 60-40 Ma sand grains that were derived from the north and sequentially appeared in the 25-8 Ma Browns Park Formation of Utah, 7-6 Ma upper Bidahochi Formation of Arizona, and 4.8 Ma Bouse Formation of the lower Colorado River and proto Gulf of California. This timing is mimicked by molecular clock estimates of divergence times among fish lineages. River integration was a response to headwater uplifts in the Yellowstone hotspot track and Rocky Mountains. 40 Ar/ 39 Ar ages refine the timing for mantle-drips that caused subsidence, then uplift, of depositional basins that influenced the integration pathway and tempo. The ~ 3-million-year timescale suggests that multiscale mantle-driven uplift, rather than lake spillover, was the primary driver for integration of the proto-Colorado River through Grand Canyon.

Colorado River↗
USGS2025

Colored shaded-relief bathymetry and acoustic backscatter of Lake Sammamish, Washington

Evidence of strong earthquakes (such as underwater landslides and associated deposits) may be recorded within the lacustrine sediments of Pacific Northwest lakes. The floor of Lake Sammamish, Wash., an approximately 11 kilometer (6.8 mile) long, 2 kilometer (1.2 mile) wide, and 35 meter (114.8 feet) deep lake located in a populated region just east of Seattle, was mapped by the U.S. Geological Survey in November of 2021 to search for evidence of past earthquakes. Mapping was conducted using a SWATHplus-M 234-kHz interferometric side-scan sonar system was pole-mounted on the U.S. Geological Survey research vessel Parke Snavely, and the system collected full-coverage bathymetric and acoustic backscatter data, which were processed to 2-meter spatial resolution. Two maps were created, a colored shaded-relief bathymetric map showing lake floor morphology (sheet 1), and an acoustic-backscatter map showing backscatter intensities (sheet 2). The results may then be utilized together to investigate past earthquake activity.

Washington↗
USGS1997

Integrity of production wells and confining unit at the Naval Weapons Industrial Reserve Plant, Dallas, Texas, 1995

Ground water in the shallow alluvial aquifer is contaminated at the Naval Weapons Industrial Reserve Plant, Dallas, Texas. Five production wells at the site are cased through the alluvial aquifer and underlying units and are screened in either the Paluxy or Twin Mountains aquifers. Three abandoned wells, originally completed in the Twin Mountains aquifer but filled with drilling mud in 1958, also penetrate the alluvial aquifer. The Paluxy and Twin Mountains aquifers are used for drinking-water supplies in and around the Dallas-Fort Worth metroplex. Trichloroethylene and its degradation products, dichloroethylene and vinyl chloride, and the metal chromium previously have been detected in the shallow alluvial aquifer. Current (1995) analyses of water-quality samples taken from the static water column of the five production wells and one of the abandoned wells indicate no trichloroethylene, dichloroethylene, or vinyl chloride in the water column of these wells. Chromium was detected in all samples, but concentrations were less than the practical quantitation limit, which is the regulatory action level for this site. The results of borehole geophysical log analysis indicate that two of the production wells could have vertically connected intervals where cement bonding in the well annulus is poor. The other production wells have overall good bonding. Temperature logs do not indicate flow behind casing except in the screened interval of one well. Geophysical logs show the Eagle Ford Shale ranges from 147 to 185 feet thick at the site. The Eagle Ford Shale has low permeability and a high plasticity index. These physical characteristics make the Eagle Ford Shale an excellent confining unit.

Texas↗
USGS2025

Protected from Pterygoplichthys? Predicting thermal habitat suitability for nonnative armored catfish in the Suwannee River

Objective Nonnative fishes can modify ecosystems and harm economies when they are introduced to new environments. Climate change is likely to assist the spread and establishment of some nonnative fishes (e.g., warmwater species), but spatiotemporal gaps in water temperature monitoring and modeling may prevent ecologists and managers from forecasting thermal habitat suitability for these taxa. The purpose of this study was to develop a predictive model of winter water temperatures and thermal habitat suitability for two priority nonnative armored catfish, Vermiculated Sailfin Catfish Pterygoplichthys disjunctivus and Orinoco Sailfin Catfish P. multiradiatus , in the Suwannee River, Florida and Georgia. Methods Precipitation- and groundwater-corrected air–water temperature models were developed and evaluated using a model selection procedure to predict water temperatures at four sites in the Suwannee River. These models were chosen because they blend the simplicity of air–water temperature models with the accuracy of hydrometeorological models to create an efficient, economical, management-relevant approach for analyzing and forecasting water temperature. Results Most of the top-performing water temperature models (92%) had precipitation or groundwater corrections to air–water temperature formulations. Projected mean and maximum water temperatures increased as simulated climate change intensified. All four Suwannee River sites studied were projected to be thermally hospitable to the survival of Vermiculated Sailfin Catfish. Lower river sites, noticeably warmer than upper river sites, were conducive to the survival of Orinoco Sailfin Catfish throughout the winter months. The upper river sites were too cold for Orinoco Sailfin Catfish survival in some climate-change scenarios, but the Suwannee River has an abundance of constant-temperature springs that are likely hospitable to Vermiculated Sailfin Catfish and Orinoco Sailfin Catfish throughout the year. Conclusions The findings suggest that winter water temperatures will likely not be a barrier to the survival of Pterygoplichthys catfish in the Suwannee River, amplifying the importance of conservation and management approaches to inhibit their spread and establishment. If the Pterygoplichthys population remains small and isolated and decision makers are able to devote required staff time and resources to managing these species, removal and eradication at local if not broader scales may be reasonable goals. This study provides a water temperature modeling approach that can aid ecologists and managers in prioritizing sites to prevent the introduction, slow the dispersal, eradicate, and control Pterygoplichthys catfish and other nonnative fishes in the Suwannee River and beyond.

Florida, Georgia↗
USGS2025

Preliminary depth to basement modeling at Salton Sea, California

The San Andreas Fault – Imperial Fault (SAF-IF) transtensional step-over zone along the southern margin of the Salton Sea hosts substantial geothermal production and lithium brine resources. Recent volcanism at the Salton Buttes and active seismicity along the SAFIF fault system highlight active tectonic and magmatic processes that pose natural hazards and may impact energy and mineral production. Characterizing the subsurface architecture and extent of concealed alteration associated with this tectono-magmatic system enhances understanding of these active processes, associated hazards, and resources. We have compiled a gravity database, consisting of new and re-processed existing data, from which we have constructed a new isostatic residual gravity anomaly map of the Salton trough. We have used this new gravity dataset together with a compilation of publicly available borehole data to develop new depth to basement inversion models for the region. These depth to basement models help to constrain basin geometries, inform alteration mapping, and reveal variations in basement rocks. Due to the concealed nature of the complex tectonic framework at the Salton trough, it is necessary to utilize geophysical methods for subsurface characterization. These new depth to basement models are a first step toward constructing 2D and 3D geophysical and geologic models of the Imperial Valley and Salton Sea geothermal area. This analysis complements other geophysical initiatives, including magnetotelluric (MT) modeling (Tokmakoff et al., 2024), magnetic mapping (Glen and Earney, 2023, 2024) and potential field modeling, and seismic studies focused on hazard and resource investigations in the Imperial Valley.

California↗
USGS2025

U.S. Geological Survey—Department of the Interior, Region 11, Alaska—2023–24 biennial science report

Introduction U.S. Geological Survey (USGS) Mission—The USGS national mission is to monitor, analyze, and predict the current and evolving dynamics of complex human and natural Earth-system interactions and to deliver actionable information at scales and timeframes relevant to decision makers. Consistent with the national mission, the USGS in Alaska provides timely and objective scientific information to help address issues and inform management decisions across five interconnected focus areas: Energy and Minerals; Geospatial Mapping; Natural Hazards; Water Quality, Streamflow, and Ice Dynamics; and Ecosystems. The USGS in Alaska consists of approximately 350 scientists and support staff working in 3 Alaska-based science centers. USGS science activities are also initiated by the Cooperative Research Unit and USGS centers outside Alaska. In the last 5 years, USGS research in Alaska has produced many scientific benefits resulting from more than 900 publications. Publications relevant to Alaska can be conveniently searched by keyword through the USGS Publications Warehouse at https://pubs.usgs.gov/.

Alaska↗
USGS2026

High‐resolution surface deformation and slip distribution observations for the 2023 Kahramanmaraş, Türkiye, earthquake sequence help constrain the rupture process

Splay, or branch, faults are a common geometric feature of earthquake surface ruptures and may provide constraints on the rupture behavior of an earthquake. The 2023 M w 7.8 Pazarcık and M w 7.5 Elbistan, Türkiye, earthquakes are examples of ruptures with multiple small splays, and the Pazarcık earthquake nucleated on a splay fault, the Narlı fault, before rupturing bilaterally on the East Anatolian fault (EAF). Here, we present 3‐m‐resolution surface displacement from subpixel correlation of Planet Dove optical images for the entirety of both ruptures with corresponding surface slip distributions. For a 30‐km‐long study region spanning the Narlı‐EAF intersection, we compare surface slip derived from five data sets with different resolutions (on‐the‐ground, WorldView, Planet Dove, Sentinel‐2, and Sentinel‐1) to elucidate complementary information. In addition, we integrate information from the surface expression of faulting with published dynamic rupture simulations and rupture process studies to constrain a rupture evolution for the Pazarcık earthquake that is consistent across data sets. This work highlights the complementary nature of disparate surface slip data sets and the role that high‐resolution surface displacement information, including from fault splays, can play in constraining nonunique rupture models and refining understanding of the earthquake rupture process.

Bulletin of the Seismological Society of America↗
USGS2026

Multiple-well monitoring site adjacent to the Midway- Sunset and Buena Vista Oil Fields, Kern County, California

Groundwater quality in and around oil fields in the Southern San Joaquin Valley is of interest to many California residents that rely heavily on groundwater for domestic, commercial, and agricultural use. To help assess the effects of historical oil-field activities and natural geologic sources on groundwater near the southwest margins of the Kern County Groundwater Subbasin, a multiple-well monitoring site was installed near the administrative boundary between the Midway-Sunset and Buena Vista Oil Fields in Kern County, California. The installation of the Midway-Sunset Buena Vista multiple-well monitoring site (MSBV) supports regional analysis of the relations of oil and gas sources to groundwater quality by providing information about the geology, hydrology, geophysical properties, and water quality of the alluvial and upper Tulare aquifers in areas where groundwater data were limited. Data collected from the site included drill cuttings, whole core samples, sidewall core samples, mud-gas analysis, borehole geophysical logs, depth to water measurements, and water quality samples. Whole cores were scanned using dual energy computed tomography. Subsamples of selected cores were analyzed for density, porosity, specific retention, and bulk minerology. Thin sections of the subsamples were prepared, photographed, and examined. Two samples were analyzed using scanning electron microscope technology to examine the microporosity of diatomite laden sediment. Instrumentation installed in the wells collect hourly depth to water measurements. Analysis of the data show there is 355 feet of alluvium overlying the Tulare Formation at the well site. The contact between the two formations is an aquitard resulting in a perched aquifer in the alluvium and unconfined aquifer in the Tulare Formation. The alluvium is more heterogenous and finer grained than the Tulare Formation resulting in markedly higher porosity in the alluvium compared to the Tulare Formation. Higher specific retention observed in the alluvium is attributed to the finer grained sediment and greater abundance of reworked diatomite (as represented by opal-CT [cristobalite-tridymite]) compared to the Tulare Formation. Total dissolved solids (TDS) approached or exceeded 10,000 milligrams per liter (mg/L) in the alluvium from approximately 176 to 242 feet below land surface and at the top of the Amnicola clay at approximately 670 feet below land surface within the Tulare Formation. Elevated TDS, chloride, and boron concentrations in the alluvium and on top of the Amnicola clay likely reflect groundwater that is mixed with oil-field water. Water chemistry and modern-aged groundwater in the alluvial monitoring well (MSBV #3) are consistent with the oil-field water in the alluvium being derived from documented historical surface disposal of oil-field water upslope (northwest) of the site. Water chemistry and pre-modern groundwater age in the deeper Tulare monitoring well (MSBV #1) on top of the Amnicola clay are consistent with oil-field fluids derived from upslope natural geologic sources or old oil wells that leak in the subsurface. Shallow groundwater in the Tulare (MSBV #2) is not affected by mixing with oil-field sources.

EarthArXiv↗
USGS2026

Widespread landslide activity in an extreme wet season and implications for regional sediment management, eastern San Francisco Bay area, California

Watershed sediment production is expected to increase in a warmer future with more extreme rain, with cascading effects throughout drainage and sediment-transport networks. This study investigated landscape-scale sediment movement in the eastern San Francisco Bay area, California, USA, during the extreme 2016–2017 wet season that brought major rainfall, landslides, and flooding. Mapping 8,928 landslides across a 1,050-km 2 study area revealed new sediment yield of 510–956 t/km 2 , equivalent to denudation of 193–361 mm/ky. These results correspond closely to long-term denudation rates in the northern and central California Coast Ranges, indicating that mass wasting in very wet years dominates long-term sediment mobilization. However, due to long residence times in drainage networks, the 2017 landslides contributed at most ∼1%–2% of the estimated locally derived fluvial sediment transport to San Francisco Bay. Although the amount of sediment mobilized did not threaten municipal water supplies, small rangeland impoundments in this mixed-use landscape lost storage capacity to new sedimentation. Considering regional sediment supply and demand, even the exceptionally large sediment delivery in an extreme wet year cannot meet the need for sediment to accrete tidal wetlands in the bay. To keep pace with rising sea levels, this abnormally high terrestrial sediment input would need to occur in 50 of the next 75 years, an unlikely occurrence due to the prevalence of recent drought years. Shoreline protection and restoration in the bay would need additional sources of sediment, such as through management of dredged sediment through beneficial-reuse programs.

California↗
USGS2024

Aftershock forecasting

Aftershocks can compound the impacts of a major earthquake, disrupting recovery efforts and potentially further damaging weakened buildings and infrastructure. Forecasts of the probability of aftershocks can therefore aid decision-making during earthquake response and recovery. Several countries issue authoritative aftershock forecasts. Most aftershock forecasts are based on simple statistical models that were first developed in the 1980s and remain the best available models. We review these statistical models, and the wide-ranging research to advance aftershock forecasting through better statistical, physical, and machine learning methods. Physics-based forecasts based on mainshock stress changes can sometimes match the statistical models in testing, but don’t yet outperform them. Physical models are also hampered by unsolved problems such as the mechanics of dynamic triggering and the influence of background conditions. Initial work on machine learning forecasts shows promise, and new machine learning earthquake catalogs provide an opportunity to advance all types of aftershock forecasts.

Annual Review of Earth and Planetary Sciences↗
USGS2025

Geochemistry and Soils of the Big Smoky Valley Fens, Nevada

Fens are groundwater-fed wetlands that can provide habitat for plants and animals. Due to anthropogenic activities and climate change, many fens around the world are at risk. This paper presents the results of a study of the hydrology and geochemistry of fens in Big Smoky Valley, central Nevada to support the Bureau of Land Management’s activities in the area. A water sample from the largest fen in the study area was analyzed for its water chemistry and compared to a nearby alluvial aquifer and hot spring. The high SiO 2 concentration of the fen sample implies that the fen water may originate from geothermal water. A soil core was taken to analyze radiocarbon age and soil type. A majority of the core was composed of silt and clay interlayered with water-filled voids. Changes in the character of the clay with depth suggest that there may have been changes in the depositional environment over time. Radiocarbon dating of Ruppia seeds showed longevity of the fen, with the minimum 14 C age of the core as 4,375±40 years. This paper provides reconnaissance-level information on the Big Smoky Valley fens, but further information would be needed to better understand the source of water to the fens or how the fen environment has changed over time with climate.

Nevada↗
USGS2026

Water use permits as of July 2024 and reported water use near the North Unit of Theodore Roosevelt National Park, North Dakota, 1980–2023

Starting in the early 2000s, increasing oil and gas development in western North Dakota created a need for additional water resources from surface-water and groundwater sources near the North Unit of Theodore Roosevelt National Park. To summarize the use of water in that area, the U.S. Geological Survey, in cooperation with the National Park Service, developed a map of surface-water and groundwater resources, aquifers, and water-use diversions, and plotted water-use trends from 1980 to 2023. Reported water used from permits in the map area has more than doubled since 2020, increasing from about 750 acre-feet in 2020 to about 2,300 acre-feet in 2022 and 2,000 acre-feet in 2023. Surface water provided the primary source of reported water used for the study period with an average of about 410 acre-feet per year from 1980 through 2017 and about 1,330 acre-feet per year from 2018 through 2023. After 2011, groundwater sourced from the Little Missouri River, Tobacco Garden Creek, Fox Hills, Fort Union, and Dakota aquifers became a larger portion of total annual reported water use from permits in the map area. From 1980 through 2015, water use for irrigation averaged 86 percent of the total annual reported surface-water and groundwater use in the map area. Starting in 2011, however, industrial uses became a proportionally larger total use of water, and in 2015, became the highest reported volume of water use in the map area. From 2011 to 2023, industrial use designated for water depots increased from 50 acre-feet to about 1,370 acre-feet, accounting for about 70 percent of total reported water use in the map area in 2023.

North Dakota↗
USGS2026

A diatom-based quantitative sea-ice proxy for the Bering and Chukchi seas

Sea ice affects Earth's climate system on both regional and global scales. Its incorporation into climate can be used to achieve more accurate predictions of future climate. However, instrumental records of sea-ice concentration do not extend earlier than 1978. In an effort to extend this record, we constructed a proxy using the generalized additive model based on relative abundances of five easy-to-identify diatom species found in sediment samples across the Bering and Chukchi seas. Here we present the first quantitative diatom-based sea-ice proxy developed for Beringia. The developed proxy has been applied to two sediment cores in the Bering Sea ranging from 0 to 25.7 ka (HLY0204 51JPC) and 369 to 430 ka (IODP Exp 323 Site U1345) and one in the Chukchi Sea ranging from 2.7 to 10 ka (HLY0204 24JPC). The obtained reconstructions of sea-ice concentrations are similar, but not identical to previously published qualitative and nearby records based on other proxies. Because our results are quantitative, they can be incorporated into regional climate models. The proxy is publicly available as an R Shiny application (app) and can be applied to any diatom count from marine sediments in the region.

Bering Sea, Chukchi Sea↗
USGS2025

Hydrogeologic framework of the Mountain Home area, southern Idaho

In the arid western Snake River Plain around the City of Mountain Home, Idaho, declining groundwater levels concern agricultural, municipal, and other water users who rely on groundwater for sustenance because surface-water resources are limited. The U.S. Geological Survey developed this hydrogeologic framework to provide an updated characterization of groundwater resources in the western Snake River Plain around the City of Mountain Home. The hydrogeologic framework comprises: (1) a conceptual description of hydrogeologic units, (2) a three-dimensional hydrogeologic model and borehole database, (3) a map of groundwater levels and change, and (4) a discussion of groundwater occurrence and movement within the study area. Hydrogeologic units were defined based on existing literature and the borehole database compiled for this study; the five hydrogeologic units are granite, rhyolite, basalt, fine-grained sediments, and coarse-grained sediments. Each unit can bear water, but the main regional aquifer in the study area occurs in the basalt and fine-grained sediment units with depth to water ranging from 150 to 765 feet. A perched groundwater zone near the City of Mountain Home is primarily hosted in basalt and used domestically with most depths to water ranging from 30 to 100 feet. Interflow zones, scoria, and vertical fractures create heterogeneity within the basalt hydrogeologic unit that exerts strong control on groundwater movement, creating horizontal perching conditions and zones of enhanced vertical conductivity that facilitate downward groundwater percolation. In the fine- and coarse-grained sediments and rhyolite units, inferred faults both impede and enhance groundwater movement. The borehole database was constructed by digitizing 540 well-driller reports and was used to build a three-dimensional hydrogeologic framework model which reasonably represents the spatial distribution of hydrogeologic units in the study area. Generally, fine-grained sediments underlie much of the study area, with basalt concentrated in the central and western study area and rhyolite and granite in the uplands to the north. Groundwater levels were measured in 180 wells in March and November 2023; these data were used to develop water-table contour maps and describe groundwater-level change over an irrigation season. Groundwater generally flows south-southwest to the Snake River and groundwater levels declined across most of the study area (from 0.03 to 22.01 feet) between spring and autumn 2023, which is consistent with long-term declines in the Cinder Cone Butte Critical Groundwater Area and Mountain Home Groundwater Management Area. Groundwater levels rose (0.6 to 15.44 feet) over the irrigation season in most wells in the perched groundwater zone near the City of Mountain Home and near the Snake River, indicating the importance of surface-water recharge to groundwater in areas where surface water irrigation occurs. In aggregate, this hydrogeologic framework provides an updated characterization of and new insights into groundwater resources in the study area to help inform water resources management.

Idaho↗
USGS2025

Altitude of the potentiometric surface and depth to water in the Mississippi River Valley alluvial aquifer, spring 2022

Potentiometric-surface and depth-to-water maps for spring 2022 were created for the Mississippi River Valley alluvial aquifer (MRVA) using groundwater-altitude data from 1,136 wells completed in the MRVA and from the altitude of the top of the water surface in area rivers from 160 streamgages. The potentiometric-surface and depth-to-water maps for 2022 were created to support investigations to characterize the MRVA as part of the U.S. Geological Survey Water Availability and Use Science Program. Sufficient data were available to map the potentiometric surface and depth to water of the MRVA for spring 2022 for about 83 percent of the aquifer area. The potentiometric contours ranged from 0 to 340 feet (ft) above the North American Vertical Datum of 1988. The regional direction of groundwater gradient was generally to the south-southwest, except in areas of groundwater-altitude depressions, where the groundwater gradient was into the depression, and near rivers, where the groundwater gradient can be from aquifer to the river or from the river into the aquifer. There are large depressions in the potentiometric-surface map in the lower one-half of the Cache region and in much of the Grand Prairie and Delta regions. Depth to water in the MRVA, spring 2022, by well ranged from 5.00 ft above land surface to 145.66 ft below land surface.

Mississippi River Valley alluvial aquifer↗
USGS2025

Geologic framework and Holocene sand thickness offshore of Seven Mile Island, New Jersey

The U.S. Geological Survey assessed the Quaternary evolution of Seven Mile Island, New Jersey, to quantify coastal sediment availability, which is crucial for establishing sediment budgets, understanding sediment dispersal, and managing coastlines. This report presents preliminary interpretations of seismic profiles, maps of Holocene sand thickness from the shoreline to 2 kilometers offshore, and tables quantifying the volume of available sediment along the coastal margin based on data collected during 2021 and 2022. The results reveal spatial variability in the thickness and cross-shore extent of Holocene sand. The study area was separated into northern, central, and southern zones by using underlying stratigraphy and geomorphic features. The characteristics and spatial extent of the Holocene sand deposit indicate that hydrodynamic processes contribute to its spatial variability. Northern Seven Mile Island contains the thickest deposits of Holocene sand that were formed by sediment bypass around the Townsends Inlet ebb-tidal delta. Specifically, swash bars have welded to the updrift end of Seven Mile Island and have formed thick deposits of Holocene sand that thicken landward and taper seaward. Despite their thickness, these deposits have the smallest cross-shore extent; therefore, northern Seven Mile Island has the smallest volume of Holocene sand of the three geomorphic zones. Central Seven Mile Island has the thinnest Holocene sand deposits because this section of the barrier island is outside the influence of ebb-tidal deltas. Southern Seven Mile Island has the greatest volumes of Holocene sand because of increased accommodation and deposition adjacent to the Hereford Inlet ebb-tidal delta. Even though tidal inlets exert variable influence on the three geomorphic zones, sediment is distributed fairly uniformly within each geomorphic zone; each of the three zones contains 31.05–36.48 percent of the volume of available Holocene sand.

New Jersey↗
USGS2024

Application of non-stationary shear-wave velocity randomization approach to predict 1D seismic site response and its variability at two downhole array recordings

Accounting for uncertainties in seismic site response is crucial to improving the performance of one-dimensional (1D) ground response analyses (GRAs) at downhole array recording sites. In addition to site effects, uncertainties in 1D-GRAs can also be contributed from the seismic source and/or path. Though often representing not more than one percent of the distance (path) from the source, site conditions are known to have an enormous influence on ground shaking. In this study, we focus on the site shear-wave velocity ( V S ) structure, which is the main ingredient for estimating the variability of site response. As such, V S can manifest aleatory uncertainties related to the effects of small-scale spatial heterogeneities within the near surface, thus V S can substantially modify ground shaking during earthquakes. We apply a novel V S randomization approach to propagate the small-scale heterogeneities of V S to estimate seismic site response within a non-stationary probabilistic framework. The randomization approach generates samples of V S profiles that are used to perform several 1D-GRAs and obtain an averaged site response and related variability. The proposed method is implemented on data recorded at two downhole array sites with different subsurface soil conditions: a soft soil site on Treasure Island (California, United States of America) and a rock outcrop site in Cadarache (South-East France). We show that synthetic surface-to-borehole transfer functions from 1D-GRAs provide an acceptable fit to the empirical transfer functions from low-motion earthquake records and succeed in reproducing most of the site-specific seismic response variability. The remaining mismatch between transfer functions is likely due to insufficient precision on the seismic bedrock and the impedance contrast. The variability in site response is discussed with emphasis on the role of V S small-scale heterogeneities, attenuation, and input motion incidence angle in ground motion variability for the site and soil conditions at both locations.

California↗
USGS2025

Fiber-optic distributed temperature sensing of hydrologic processes—Diverse deployments and new applications by the U.S. Geological Survey

Fiber-optic distributed temperature sensing instruments harness the temperature-dependent properties of glass to measure temperature continuously along optical fibers by using precise pulses of laser light. In the mid-2000s, this technology was refined for environmental monitoring purposes such as snowpack-air exchange, groundwater/surface-water exchange, and lake-water stratification. Fiber-optic distributed temperature sensing has revealed unprecedented details about preferential flow processes; however, the method is labor intensive and requires specific training, resulting in limited use by the broader water community. With the ongoing national implementation of the U.S. Geological Survey Next Generation Water Observing System, there has been renewed interest in harnessing the unique spatiotemporal monitoring capabilities of fiber-optic distributed temperature sensing. This fact sheet briefly describes this technology, highlights uses by the U.S. Geological Survey, and discusses current applications and future opportunities.

Fact Sheet↗