SEARCH · USGS Science

Results for “Marine Structures”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 919 records · Page 51Linked to original sources

USGS1942

General geology and ground-water resources of the island of Maui, Hawaii

Maui, the second largest island in the Hawaiian group, is 48 miles long, 26 miles wide, and covers 728 square miles. The principal town is Wailuku. Sugar cane and pineapples are the principal crops. Water is used chiefly for irrigating cane. The purpose of the investigation was to study the geology and the ground-water resources of the island. Maui was built by two volcanoes. East Maui or Haleakala Volcano is 10,025 feet high and famous for its so-called crater, which is a section of Hawaii National Park. Evidence is given to show that it is the head of two amphitheater-headed valleys in which numerous secondary eruptions have occurred and that it is not a crater, caldera, or eroded caldera. West Maui is a deeply dissected volcano 5,788 feet high. The flat Isthmus connecting the two volcanoes was made by lavas from East Maui banking against the West Maui Mountains. Plate 1 shows the geology, wells, springs, and water-development tunnels. Plate 2 is a map and description of points of geologic interest along the main highways. Volcanic terms used in the report are briefly defined. A synopsis of the climate is included and a record of the annual rainfall at all stations is given also. Puu Kukui, on West Maui, has an average annual rainfall of 389 inches and it lies just six miles from Olowalu where only 2 inches of rain fell in 1928, the lowest ever recorded in the Hawaiian Islands. The second rainiest place in the Territory is Kuhiwa Gulch on East Maui where 523 inches fell during 1937. Rainfall averages 2,360 million gallons daily on East Maui and 580 on West Maui. Ground water at the point of use in months of low rainfall is worth about $120 per million gallons, which makes most undeveloped supplies valuable. The oldest rocks on East Maui are the very permeable primitive Honomanu basalts, which were extruded probably in Pliocene and early Pleistocene time from three rift zones. These rocks form a dome about 8,000 feet high and extend an unknown distance below sea level. Covering this dome are the Kula volcanics, extruded probably in early and middle Pleistocene time, and characterized by andesites, andesitic basalts, and picritic basalts. They are 2.000 feet thick on the summit and 50 to 200 feet thick at the periphery. They contain a sufficient number of interbedded soils, thin vitric tuff beds, and lava-filled valleys in their upper part to give rise to valuable perched springs in wet areas. The Kula lavas accumulated during a waning volcanic phase which was followed by a quiescence long enough for the erosion of deep amphitheater-headed valleys in the east or wet half of the mountain. Volcanic activity was renewed in middle (?) to late Pleistocene time and continued until Recent time, during which the Hana volcanic series was laid down. The last lava flow was erupted about 1750. The Hana lavas comprise andesitic, picritic, and olivine basalts. They veneered large areas of the east and south slopes, partly filled the deep amphitheater-headed valleys, and deeply buried the smaller valleys in the eastern half of the mountain. The Hana rocks are exceedingly permeable and much rain sinks into them. The oldest rocks on West Maui are the very permeable primitive Wailuku basalts, which were extruded probably in Pliocene and early Pleistocene time from two rifts and from many radial fissures. The basalts form a dome about 5,600 feet high and extend an unknown distance below sea level. Iao Valley is the eroded caldera of this dome. Forming an incomplete veneer over the dome are the Honolua soda trachytes and oligoclase andesites. They were extruded in late Pliocene (?) or early Pleistocene time, chiefly from bulbous domes. The clinker beds carry some water but the rocks are generally too dense to be good aquifers. During early (?) Pleistocene the West Maui volcano was cut by deep amphitheater-headed valleys and then all of Maui was deeply submerged. Four scattered eruptions occurred on West Maui in middle (?) and late Pleistocene time. The cones and lavas cover only small areas and are called the Lahaina volcanic series. The sedimentary rocks of both East and West Maui are chiefly late Quaternary and comprise fans, landslide debris, delta deposits, and valley fills, mostly of poorly permeable and poorly assorted bouldery alluvium. They are overlain on the Isthmus by extensive calcareous dunes of three ages. A mud flow more than 300 feet thick is exposed in Kaupo Valley. During the fluctuations of the ocean in the Pleistocene, the island was emerged and submerged several times. Calcareous fossiliferous marine conglomerates deposited during this period are found up to an altitude of 250 feet on West Maui. The Homomanu, Wailuku, and Kula lavas are the chief aquifers. They supply 28 irrigation wells which yield an average of 170 million gallons a day of basal water. These wells are mine-like shafts with infiltration tunnels and are called Maui-type wells. Well 16 yields 40,000,000 gallons daily with a 22-foot drawdown, which is the largest amount yielded by any well in the Hawaiian Islands. The largest spring (no. 26) on the island is artesian. It yields 10,400,000 gallons daily and issues from Kula lavas near Nahiku. West Maui has numerous perennial streams supplied by springs from a dike complex. Twenty-three tunnels in West Maui recover 20.5 million gallons a day of high-level water, mostly from this dike complex. East Maui has few perennial streams in proportion to its size, and they are chiefly small due to the water sheds being underlain with permeable lavas. Forty tunnels recover 6 million gallons a day of high-level water in East Maui and all from structures other than dikes. It is estimated that about 100 million gallons a day of basal water wastes into the sea from West Maui and about 700 million gallons a day from East Maui. A number of sites are described where wells could be sunk to recover this water. Sites are also described where tunnels could be driven to recover high-level supplies. The hydrology of East and West Maui is conspicuously different in many respects, mainly because of the difference in the stage of dissection, the extensive veneer of very permeable Hann lavas on East Maui, and the comparatively small area of the Lahaina lavas of similar age on West Maui. The only thermal water known in the Hawaiian Islands, except on the active volcano of Kilauea, is in a well in West Maui. The Nahiku area has been mapped and studied in detail. The upper part of the Honomanu volcanic series, exposed in the sea cliffs, in petrographic character is transitional into the overlying Kula lavas, Kula and Hana time were characterized by a long succession of valley-cutting episodes, each valley being filled by lava erupted from the east rift zone. The lavas include olivine basalts, picritic basalts, and basaltic andesites, In the Nahiku area basal ground water occurs largely in the Honomanu basalts. Perched water occurs in many of the later lavas, generally following the axes of buried valleys. The members which perch the water are mostly ashy soil beds, although an unusually extensive, thick layer of much decomposed clinker also appears to be a supporting member. Most of the water travels through the basal clinker members of aa lavas. Artesian water is encountered in the upper, transitional part of the Honomanu volcanic series. The aquifer is permeable porphyritic pahoehoe; the confining members are relatively impermeable nonporphyritic aa. The lavas of East Maui are described according to stratigraphic groups. The oldest or Honomanu lavas are olivine basalts like the primitive lavas in other Hawaiian volcanoes. The later or Kula and Hana lavas include basalts, basaltic andesites, andesites, and picritic basalts. The normative nepheline of analyzed East Maui lavas has not been identified in the mode. The degree of differentiation is inversely proportional to the frequency of eruptions. The lavas of West Maui volcano are divided into the Wailuku volcanic series, consisting largely of olivine basalts with less abundant olivine-poor basalts, hypersthene basalts, and picritic basalts; the Honolua volcanic series, consisting of oligoclase andesites and soda trachytes; and the Lahaina volcanic series, consisting of nepheline basanite and picritic basalts. Coarse-grained gabbros intrude the Wailuku lavas. Differentiation was undoubtedly partly by crystal settling, but the alkali curves of the variation diagram suggest that volatile transfer was of some importance.

Hawaii↗

USGS1989

Impacts of exploratory drilling for oil and gas on the benthic environment of Georges Bank

A 3-year monitoring program was performed to assess the impacts of exploratory drilling for oil and gas on the benthic environment of Georges Bank, an important commercial fishery region in the North Atlantic east of Massachusetts, USA. Surficial sediments were sampled for chemical and benthic infaunal analysis and bottom still photographs were taken to document bottom microtopography and epifauna at 46 stations during 12 field surveys. The surveys were performed quarterly from just before drilling began, during drilling, and for nearly 2 years after completion of drilling. Two of the eight drilling sites were selected for monitoring. Twenty-nine stations were positioned in a tight radial array around a drilling site in 80 m of water. A second group of three stations was positioned near another drilling site in 140 m of water. The remaining stations covered a broad expanse of the Bank and adjacent suspected sites of deposition of fine-grained sediments.\ Of the 12 elements analyzed in bulk sediments, only barium increased in concentration during the period when drilling was taking place (July 1981 to September 1982). The concentration of barium in surficial sediment increased 4·7-fold from 28 ppm before drilling to 131·7 ppm after drilling at the station closest to the drilling site in 80 m of water and 5·9-fold from 32 ppm before drilling to 172 ppm after drilling at the station closest to the drilling site in 140 m of water. The concentrations of both barium and chromium increased in the fine (silt/clay) fraction (usually less than 5% by weight of sediment from most stations) of sediments from several stations around one or both rig sites monitored during the period of drilling. Elevated concentrations of chromium (about two-fold) occurred only in sediments near the drilling site in 140 m of water. Statistically significant increases in the concentration of barium in the fine fraction to sediment were detected approximately 65 km west (downcurrent) and 35 km east of the drilling site in 80 m of water after drilling was completed. The benthic fauna were abundant and diverse throughout the study area. At most stations, the dominant species remained nearly the same from one season to another over the 3 years of sampling. Polychaetes were the most abundant, followed by crustaceans. The number of individuals of some species, particularly the amphipods Erichthonius fasciatus and Unciola inermis , showed large seasonal variations. Cluster analysis revealed a strong relationship between community structure and both sediment type and water depth. Little seasonal variation was detected, but some interannual differences were revealed by cluster analysis and correspondence analysis. The replicates from a station always resembled each other more than they resembled any replicates from other stations. In addition, the combined replicates from a station always clustered with samples from that station taken on other cruises. This excellent replication and uniformity of the benthic infaunal community at a station over time made it possible to detect very subtle changes in community parameters that might be related to discharges of drilling fluid and drill cuttings. Nevertheless, no changes were detected in benthic communities of Georges Bank that could be attributed to drilling activities.

Massachusetts↗

USGS1997

Crustal structure along the west flank of the Cascades, western Washington

Knowledge of the crustal structure of the Washington Cascades and adjacent Puget Lowland is important to both earthquake hazards studies and geologic studies of the evolution of this tectonically active region. We present a model for crustal velocity structure derived from analysis of seismic refraction/wide-angle reflection data collected in 1991 in western Washington. The 280-km-long north-south transect skirts the west flank of the Cascades as it crosses three tectonic provinces including the Northwest Cascades Thrust System (NWCS), the Puget Lowland, and the volcanic arc of the southern Cascades. Within the NWCS, upper crustal velocities range from 4.2 to 5.7 km s-1 and are consistent with the presence of a diverse suite of Mesozoic and Paleozoic metasediments and metavolcanics. In the upper 2-3 km of the Puget Lowland velocities drop to 1.7-3.5 km s-1 and reflect the occurrence of Oligocene to recent sediments within the basin. In the southern Washington Cascades, upper crustal velocities range from 4.0 to 5.5 km s-1 and are consistent with a large volume of Tertiary sediments and volcanics. A sharp change in velocity gradient at 5-10 km marks the division between the upper and middle crust. From approximately 10 to 35 km depth the velocity field is characterized by a velocity increase from ???6.0 to 7.2 km s-1. These high velocities do not support the presence of marine sedimentary rocks at depths of 10-20 km beneath the Cascades as previously proposed on the basis of magnetotelluric data. Crustal thickness ranges from 42 to 47 km along the profile. The lowermost crust consists of a 2 to 8-km-thick transitional layer with velocities of 7.3-7.4 km s-1. The upper mantle velocity appears to be an unusually low 7.6-7.8 km s-1. When compared to velocity models from other regions, this model most closely resembles those found in active continental arcs. Distinct seismicity patterns can be associated with individual tectonic provinces along the seismic transect. In the NWCS and Puget Lowland, most of the seismicity occurs below the base of the upper crust as defined by a seismic boundary at 5-10 km depth and continues to 20-30 km depth. The region of transition between the NWCS and the Puget Lowland appears as a gap in seismicity with notably less seismic activity north of the boundary between the two. Earthquakes within the Cascades are generally shallower (0-20 km) and are dominated by events associated with the Rainier Seismic Zone.

Washington↗

USGS1982

Modern shallow-water graded sand layers from storm surges, Bering Shelf: a mimic of Bouma sequences and turbidite systems

A sequence of graded sand layers, interbedded with mud, extends offshore over 100 km from the Yukon Delta shoreline across the flat, shallow (<20 m depth) epicontinental shelf of the northern Bering Sea, Alaska. Proximal graded sand beds on the delta-front platform near the shoreline are coarser (2-3phi ), thicker (10 to 20 cm), and contain more complete vertical sequences of sedimentary structures than distal beds. The inshore graded vertical sequence of structures from the base to the top of individual sand layers includes plane-parallel lamination (S b ), cross lamination (S c ), plane-parallel lamination (S d ), and mud (S e ) analogous to the Bouma T (sub a-e) turbidite sequence. Structures vary between interchannel platform deposits with complete S b -S e sequences and channel-floor sands that are all trough cross-laminated. Distally, storm-sand layers change to thin (1 to 5 cm) silt beds that contain flat and ripple-drift lamination (S (sub c-e,de) ), are commonly bioturbated, and are associated with shell and pebble lags from storm-wave reworking. The sequence of graded sands appears to be related to the major storm surges that occur every several years. The major storms increase the average 10-m water depth in southern Norton Sound as much as 5 m and cause fluctuations in pore pressure from wave cyclic loading that may liquefy the upper 2 to 3 m of sediment. Storm-associated bottom currents, possibly dominated by rapidly waning ebb flow, transport the liquefied inshore sand far offshore (> 100 kin). Such shallow-water graded layers off lobate deltas may be distinguished from similar deep-water turbidites by: 1) the predominance of trough cross-lamination, perhaps resulting from wave oscillation effects, in the proximal part of the system, and 2) gradation to common shallow marine fossils, bioturbation, and storm lag layers in distal areas.

Journal of Sedimentary Petrology↗

USGS2009

Archive of digital boomer seismic reflection data collected offshore east-central Florida during USGS cruise 00FGS01, July 14-22, 2000

In July of 2000, the U.S. Geological Survey (USGS), in cooperation with the Florida Geological Survey (FGS), conducted a geophysical survey of the Atlantic Ocean offshore Florida's east coast from Brevard County to northern Martin County. This report serves as an archive of unprocessed digital boomer seismic reflection data, trackline maps, navigation files, Geographic Information System (GIS) information, digital and handwritten Field Activity Collection System (FACS) logs, and Federal Geographic Data Committee (FGDC) metadata. A filtered and gained (a relative increase in signal amplitude) digital image of each seismic profile is also provided. Refer to the Acronyms page for expansions of all acronyms and abbreviations used in this report. The archived trace data are in standard Society of Exploration Geophysicists (SEG) SEG-Y format (Barry and others, 1975) and may be downloaded and processed with commercial or public domain software such as Seismic Unix (SU) (Cohen and Stockwell, 2005). Example SU processing scripts and USGS Software for viewing the SEG-Y files (Zihlman, 1992) are also provided. The USGS St. Petersburg Coastal and Marine Science Center assigns a unique identifier to each cruise or field activity. For example, 00FGS01 tells us the data were collected in 2000 for cooperative work with the Florida Geological Survey (FGS) and the data were collected during the first field activity for that study in that calendar year. Refer to http://walrus.wr.usgs.gov/infobank/programs/html/definition/activity.html for a detailed description of the method used to assign the field activity ID. The boomer plate is an acoustic energy source that consists of capacitors charged to a high voltage and discharged through a transducer in the water. The transducer is towed on a sled floating on the water surface and when discharged, emits a short acoustic pulse, or shot, which propagates through the water, sediment column, or rock beneath. The acoustic energy is reflected at density boundaries (such as the seafloor, sediment, or rock layers beneath the seafloor), detected by the receiver, and recorded by a PC-based seismic acquisition system. This process is repeated at timed intervals (for example, 0.5 s) and recorded for specific intervals of time (for example, 100 ms). In this way, a two-dimensional (2D) vertical profile of the shallow geologic structure beneath the ship track is produced. Figure 1 displays the acquisition geometry. Refer to table 1 for a summary of acquisition parameters. The unprocessed seismic data are stored in SEG-Y format (Barry and others, 1975). For a detailed description of the data format, refer to the SEG-Y Format page. See the How To Download SEG-Y Data page for download instructions. The printable profiles provided are GIF images that were filtered and gained using Seismic Unix software. Refer to the Software page for details about the processing and examples of the processing scripts. The printable profiles can be viewed from the Profiles page or from links located on the trackline maps. To view the trackline maps and navigation files, and for more information about these items, see the Navigation page. Detailed information about the navigation system used can be found in table 1. Of a total record length of 200 ms, only the upper 100 ms of each profile are displayed because no useful information was observed deeper in the sections. A 10 ms deep water delay appears on lines b57-b63 and sl2-sl28. No digital data were collected for line sl6. However, line sl6r is a second attempt to collect digital data for this line. Digital data and 500-shot-interval location navigation are not available for the last 1,161 shots of line sl26 due to an equipment malfunction.

Florida↗

USGS2022

Geochemical insights into formation of enigmatic ironstones from Rio Grande rise, South Atlantic Ocean

Rio Grande Rise (RGR) is an intraplate oceanic elevation in the South Atlantic Ocean that formed at a hotspot on the Mid-Atlantic Ridge during the Cretaceous. In spreading center and hotspot environments, ironstones form mainly by biomineralization of reduced Fe from hydrothermal fluids or oxidation of sulfide deposits. However, RGR has been considered aseismic and volcanically inactive for the past 46 Ma. Here, we investigate the origin of ironstones collected from the summit of RGR using multiple techniques: petrographic observations, X-ray diffraction, U-Th/He geochronology, and chemical composition. The ironstones from RGR consist of finely laminated goethite containing igneous rock fragments, carbonate fluorapatite, and calcite. Our results suggest that Fe oxyhydroxides were precipitated by Fe-oxidizing bacteria forming bacterial mats. The bacterial Fe mats underwent compaction, dewatering, goethite crystallization, and cementation that created the ironstone deposits. U-Th/He geochronology reveals protracted goethite minimum ages extending from the late Miocene to the Quaternary, probably due to multiple generations of mats, slow mineralization rates, and Fe-oxide dissolution-reprecipitation cycles. Flame-like goethite structures underneath FeMn crusts and a chimney-shaped goethite sample with a central channel indicate that the dewatering fluid flowed upward through the deposits, or a thermal fluid source may have been introduced from below the ironstone deposits. High Fe/Mn ratios, low trace metals contents (Ni + Co + Cu), and very low Fe/REY ratios suggest ironstone precipitation from a hydrothermal fluid; however, REY SN plots and bivariate Ce SN /Ce SN ⁎ versus Y SN /Ho SN and Ce SN /Ce SN ⁎ versus Nd plots are inconclusive, and a proximal source of magma was unlikely during the period of mat formation. Given this evidence, we hypothesize that a geothermal circulation system may have facilitated ironstone mineralization at RGR.

Marine Geology↗

USGS2026

Is new actually better? A structural comparison of collaborative governance structures for the management of Atlantic salmon (Salmo salar) in Maine

Collaborative governance structures (CGS) have been increasingly adopted to address joint-jurisdictional management challenges. While the establishment of CGSs has been widely studied, their practical development has remained a conspicuous gap. CGSs are variable systems with several developmental stages (activation, collectivity, and institutionalization) which eventually lead to stabilization, decline, re-creation, or re-orientation. CGSs in decline may need to revisit earlier developmental stages if members choose to re-create or re-orient the structure. The Atlantic Salmon Recovery Framework (ASRF) was the CGS responsible for managing the Gulf of Maine Distinct Population Segment of Atlantic Salmon ( Salmo salar ) from 2011 until 2019 when it was replaced by the Collaborative Management Strategy (CMS) pilot program. The CMS was designed to address concerns identified in the ASRF; 1. slow and ineffective decision-making, 2. confusion surrounding leadership, and 3. low adaptive capacity. Building upon a previous evaluation of the ASRF, we used a parallel design to compare the structural components and participant perceptions of the two structures using a comparative case study methodology. The changes that occurred between the ASRF and the CMS constitute a re-creation, providing a unique opportunity to study this developmental phase of a CGS. The issues observed in the CMS may result from a misalignment between participant expectations and the current developmental stage of the re-created CGS. The CMS reorganized ASRF members and created roles for participants without direct management jurisdiction. The implementation of the CMS addressed many concerns identified in the ASRF while others remained (i.e., high membership uncertainty and confusion surrounding decision-making procedures). Formal leadership roles have created more equal representation, but participants still reported uncertainty regarding status and formalization of non-leadership roles.

Maine↗

USGS2001

Geologic map and database of the Roseburg 30' x 60' quadrangle, Douglas and Coos Counties, Oregon

The Roseburg 30' x 60' Quadrangle covers the southeastern margin of the Oregon Coast Range and its tectonic boundary with Mesozoic terranes of the Klamath Mountains (see figures 1 and 2 in pamphlet, also shown on map sheet). The geologic framework of the Roseburg area was established by the pioneering work of Diller (1898), Wells and Peck, (1961) and Ewart Baldwin (1974) and his students (see figure 3 in pamphlet, also shown on map sheet). Baldwin and his students focussed on the history of the Eocene Tyee basin, where the sediments lap across the tectonic boundary with the Mesozoic terranes and record the accretion of the Coast Range basement to the continent. Others have examined the sedimentary fill of the Tyee basin in detail, recognizing the deep marine turbidite facies of the Tyee Formation (Snavely and others, 1964) and proposing several models for the Eocene evolution of the forearc basin (Heller and Ryberg, 1983; Chan and Dott, 1983; Heller and Dickinson, 1985; Molenaar, 1985; see Ryu and others, 1992 for a comprehensive summary). Along the eastern margin of the quadrangle, both the Tyee basin and the Klamath terranes are overlain by Eocene volcanic rocks of the Western Cascade arc (Walker and MacLeod, 1991). The thick Eocene sedimentary sequence of the Tyee basin has significant oil and gas potential (Armentrout and Suek, 1985; Gautier and others, 1993; Ryu and others, 1996). Although 13 deep test wells have been drilled in the Roseburg quadrangle (see figure 2 and table 1 in pamphlet, also shown on map sheet), exploration to date has been hampered by an incomplete understanding of the basinï¿½s tectonic setting and evolution. In response, the Oregon Department of Geology and Mineral Industries (DOGAMI) initiated a five year assessment of the oil and gas potential of the Tyee basin. This map is a product of a cooperative effort by the U. S. Geological Survey, Oregon State University, and DOGAMI to systematically map the sedimentary facies and structure of the Tyee basin. New geologic mapping of twenty-eight 7.5' quadrangles is summarized on the map (see figure 3, also shown on map sheet), and the digital database contains geologic information suitable for both 1:100K and 1:24K scale analysis. DOGAMI has published a compilation and synthesis of previous mapping (Niem and Niem, 1990), a basin-wide sequence stratigraphic model and correlations (Ryu and others, 1992), and a report on the oil and gas potential (Ryu and others, 1996). Readers interested in the oil and gas potential of the Roseburg quadrangle should use the map in combination with Ryu and others (1996) to address specific stratigraphic units and structural plays. Stratigraphic terminology for the Tyee basin adopts the type sections, formation names, and framework of Ryu and others (1992, 1996), which were developed concurrently with the mapping and are recognized throughout the basin. For detailed discussion of nomenclature, type sections, lithology, thickness and distribution, age, contact relationships, and depositional environment of stratigraphic units, the reader is referred to Ryu and others (1992). In this report we focus on the spatial, temporal, and structural relationships between units revealed by geologic mapping. Map unit ages (see figure 4 in pamphlet, also shown on map sheeet) are adjusted slightly from Ryu and others (1992, 1996) to fit new coccolith age determinations (D. Bukry, cited in pamphlet), paleomagnetic polarity data (Simpson, 1977 and new data cited in pamphlet), and the time scale of Berggren and others (1995).

Oregon↗

USGS1978

Depositional history and fault-related studies, Bolinas Lagoon, California

Studies of core sediments and seismic reflection profiles elucidate the structure and depositional history of Bolinas Lagoon, Calif., which covers 4.4 km 2 and lies in the San Andreas fault zone at the southeast corner of the Point Reyes Peninsula 20 km northwest of San Francisco. The 1906 trace of the San Andreas fault crosses the west side of the lagoon and was determined from (1) tectonically caused salt-marsh destruction indicated by comparison of 1854 and 1929 U.S. Coast and Geodetic Survey (U.S.C. & G.S.) topographic surveys, (2) formation of a tidal channel along the border of destroyed salt marshes, and (3) azimuths of the trend of the fault measured in 1907. Subsidence in the lagoon of 30 cm occurred east of the San Andreas fault in 1906. Near the east shore, seismic-reflection profiling indicates the existence of a graben fault that may connect to a graben fault on the Golden Gate Platform. Comparison of radiocarbon dates on shells and plant debris from boreholes drilled on Stinson Beach spit with a relative sea-level curve constructed for southern San Francisco Bay indicates 5.8 to more than 17.9 m of tectonic subsidence of sediments now located 33 m below mean sea level. Cored sediments indicate a marine transgression dated at 7770?65 yrs B.P. overlying freshwater organic-rich lake deposits. Fossil pollen including 2 to 8 percent Picea (spruce) indicate a late Pleistocene (?)-Early Holocene climate, cooler, wetter, and foggier than at present. Above the transgression are discontinuous and interfingering sequences of transgressive-regressive marine, estuarine, and barrier sediments that reflect rapid lateral and vertical shifts of successive depositional environments. Fossil megafauna indicate (1) accumulation in a protected, shallow-water estuary or bay, and (2) that the lagoon was probably continuously shallow and never a deep-water embayment. Analysis of grain-size parameters, pollen frequencies, and organic remains from a core near the north end of the lagoon indicates (1) that mid-nineteenth-century redwood logging correlates with rates of sediment accumulation of l.3 to 1.9 cm/yr that are three to 6 times higher than post-1906 rates of 0.3 to 0.4 cm/yr, (2) accumulation of up to 115 cm of sediment since 1849, and (3) an anomalously coarse-grained sediment that may correlate with the 1906 earthquake.

Open-File Report↗

USGS2005

Geology and tsunamigenic potential of submarine landslides in Santa Barbara Channel, Southern California

A large submarine landslide complex and four small landslides developed under the Santa Barbara Channel, suggesting a potential hazard from landslide-generated tsunamis. We integrate offshore stratigraphy and geologic structure, multibeam bathymetric information, and several kinds of seismic-reflection data to understand how and when the submarine landslides formed. Seismic-reflection data show that mass failure along the slope began at least 200 ka ago. Landslides appear as zones of poor reflectivity having an irregular upper surface, and these zones alternate vertically with strong parallel reflections. The emplacement ages of two of the three main landslide lobes are well established at 8 and 10 ka. The source material for the youngest part of the landslide complex was sediment of probable late Pleistocene and Holocene age that accumulated in a shelf-edge delta. Directly under this delta, growth of faults and anticlines was particularly intense and tended to oversteepen the deltaic deposits. These active structures also formed migration pathways and reservoirs for aqueous and hydrocarbon fluids from the deep basin. Tsunami deposits have been described from a low-lying area near Santa Barbara, and numerical modeling of tsunamis generated by hypothetical landslides in Santa Barbara Channel indicates a moderate to severe threat [Borrero, J.C., Dolan, J.F. and Synolakis, C.E., 2001. Tsunamis within the eastern Santa Barbara Channel. Geophys. Res. Lett., 28(4): 643-646.], involving wave runups of 2-20 m, for a range of assumed landslide volumes. Inundation from these waves, however, is expected to be highly focused so that only narrow (???10-km) sections of the shoreline would be affected. Crown Copyright ?? 2005 Published by Elsevier B.V. All rights reserved.

Marine Geology↗

USGS2007

Recommendations for a barrier island breach management plan for Fire Island National Seashore, including the Otis Pike High Dune Wilderness Area, Long Island, New York

The U.S Army Corps of Engineers, New York District is developing engineering plans, including economic costs and benefits, for storm damage reduction along an 83 mile stretch of the coastal barrier islands and beaches on the south shore of Long Island, NY from Fire Island Inlet east to the Montauk Point headland. The plan, expected to include various alternatives for storm protection and erosion mitigation, is referred to as the Fire Island to Montauk Point Reformulation Plan (FIMP). These plans are expected to follow the Corps of Engineers’ Environmental Operating Principles striving for long term environmental sustainability and balance between environmental protection and protection of human health and property. Fire Island National Seashore (FIIS), a 19,579 acre unit of the National Park System includes a 32 mile long coastal barrier island located within the FIMP project area. A seven-mile section of the park, Otis Pike Fire Island High Dune Wilderness Area, is also a designated Federal Wilderness Area. The FIIS includes not only the barrier island and sand dunes, but also several islands, sand flats and wetlands landward of the barrier, submerged parts of Great South Bay shoreface, extending approximately 4,000 feet into the bay with the inner shelf region extending approximately 1,000 feet seaward of the Fire Island shoreline. The Fire Island barrier islands, a sand-starved system dominated by highly dynamic processes, are struggling to maintain their integrity in the face of sea-level rise and storms. Adding to the dilemma is that development on the barriers and the mainland has increased greatly during the past 50 years. As such, managers and decision makers in federal agencies, state agencies and local governments are challenged to balance tradeoffs between protection of lives and property, public access and long term conservation of natural habitats and processes and the plants and animals that depend on these habitats. National Park Service (NPS) policy stipulates that natural coastal processes be maintained to the greatest extent possible and not be impeded so as to conserve landforms, habitats and natural ecosystem resources that reply on the landforms and processes for long-term sustainability of the national park. Storms and associated processes such as waves, tides, currents and relative sea-level change are critical elements for the formation and evolution of these barrier islands, sand dunes, back-barrier sand flats and lagoons and vegetated wetlands. Processes such as wave run-up, overwash and barrier beaching, which occur during elevated storm surge are all necessary processes in enabling the efficient transfer of sediments, nutrients and marine water from the Atlantic Ocean across barriers and into Great South Bay. A large body of scientific data and information published over the past 50 years shows that such transfers of sediment and water from the ocean to the bays are essential for the long-term maintenance of the barrier island and back-bay systems and their biologically diverse habitats an d ecosystems. Current relative sea-level rise (~12 in/century) is chronic and pervasive in driving Long Island coastal change and with the likelihood of accelerating sea level rise in the near future, coastal hazards such as erosion, inundation, and storm surge flooding will increase, with corresponding increased risk to life and property on both Fire Island and on the mainland. In addition, the cumulative effects over the past century and more, both direct and indirect, of human impacts on the Long Island coast have altered the barrier beach and dunes and sediment transport processes. These impacts have likely increased the potential for breaching and increased risk to life and property on the coast and the mainland. Examples of direct impacts are: the stone jetties at Moriches, Shinnecock, and Fire Island tidal inlets and groin field structures at Westhampton that alter littoral processes, armoring and erosion-control stabilization of the headlandds such as the Montauk Point headlands, and deepening of navigation channels by dredging through the tidal inlets and in the bays. Indirect impacts that have a bearing on decisions to deal with breaching are: high-risk development of the barrier islands and low-lying areas of the mainland vulnerable to flooding, and the dredging of nearshore sand shoals for beach nourishment. The NPS strives to employ a coastal management framework for decision making that is based on assessment of the physical and ecological properties of the shoreline as well as human welfare and property. In order to protect developed areas of Fire Island and the mainland from loss of life, flooding, and other economic and physical damage, the NPS will likely need to consider allowing artificial closure of some breaches within the FIIS under certain circumstances. The decision by the NPS to allow breaches to evolve naturally and possibly close or to allow artificially closing breaches is based on four criteria: 1. Volumes of sediment transported landward and exchange of water and nutrients; 2. Elevated water levels and flooding risk to mainland life and property; 3. Engineering processes of artificial closure; and 4. Economic costs and benefits of artificial closure. This report for breach management presents protocols which specify when breach closures within the FIIS might be desirable and necessary, as well as provides recommendations for structural breach closure engineering operations which are indented to minimize negative impacts to the natural wilderness values and cultural resources within the FIIS, particularly the Otis Pike Wilderness Area. The goal of the plan is to strike a balance between protecting natural resources and allowing natural processes to operate and avoiding loss of life and excessive property damage.

New York↗

USGS2023

Fish assemblages in the Penobscot River: A decade after dam removal

The Penobscot River Restoration Project in Maine was a large river rehabilitation project that culminated in the removal of the two lowermost dams and improvements to fish passage on several remaining dams. Fish assemblages were surveyed for 3 years prior to rehabilitation, 3 years after rehabilitation, and 8 years after rehabilitation. Approximately 475 km of shoreline were sampled via boat electrofishing, yielding 133,394 individual fish of 41 species. The greatest shifts in assemblage structure occurred immediately after dam removal in formerly impounded sections, with an increased prevalence of riverine and migratory species. Long-term sampling documented changes within tributaries and tidally influenced river segments, where large schools of adult and young-of-the-year alosines increased in abundance. Upstream of the lowermost dam, the river remains dominated by lacustrine species, while adult anadromous fishes continue to be most abundant immediately downstream of the lowermost dam. Our results provide increased evidence that dam removals result in altered fish assemblages, which are now dominated by riverine and anadromous species in previously impounded habitats. Alosines in the Penobscot River have exhibited the greatest long-term response to river restoration efforts.

Maine↗

USGS2012

Archive of digital boomer subbottom data collected during USGS cruise 05FGS01 offshore east-central Florida, July 17-29, 2005

In July of 2005, the U.S. Geological Survey (USGS), in cooperation with the Florida Geological Survey (FGS), conducted a geophysical survey of the Atlantic Ocean offshore of Florida's east coast from Flagler Beach to Daytona Beach. This report serves as an archive of unprocessed digital boomer subbottom data, trackline maps, navigation files, Geographic Information System (GIS) files, Field Activity Collection System (FACS) logs and formal Federal Geographic Data Committee (FGDC) metadata. Filtered and gained (showing a relative increase in signal amplitude) digital images of the seismic profiles are also provided. Refer to the Acronyms page for expansions of acronyms and abbreviations used in this report. The USGS Saint Petersburg Coastal and Marine Science Center (SPCMSC) assigns a unique identifier to each cruise or field activity. For example, 05FGS01 tells us the data were collected in 2005 for cooperative work with the FGS and the data were collected during the first field activity for that project in that calendar year. Refer to http://walrus.wr.usgs.gov/infobank/programs/html/definition/activity.html for a detailed description of the method used to assign the field activity ID. The boomer subbottom processing system consists of an acoustic energy source that is made up of capacitors charged to a high voltage and discharged through a transducer in the water. The transducer is towed on a sled floating on the water surface and when discharged emits a short acoustic pulse, or shot, which propagates through the water column and shallow stratrigraphy below. The acoustic energy is reflected at density boundaries (such as the seafloor or sediment layers beneath the seafloor), detected by the receiver (a hydrophone streamer), and recorded by a PC-based seismic acquisition system. This process is repeated at timed intervals (for example, 0.5 s) and recorded for specific intervals of time (for example, 100 ms). In this way, a two-dimensional (2-D) vertical image of the shallow geologic structure beneath the ship track is produced. Figure 1 displays the acquisition geometry. Refer to table 1 for a summary of acquisition parameters and table 2 for trackline statistics. The archived trace data are in standard Society of Exploration Geophysicists (SEG) SEG Y format (Barry and others, 1975), except an ASCII format is used for the first 3,200 bytes of the card image header instead of the standard EBCDIC format. For a detailed description about the recorded trace headers, refer to the SEG Y Format page. The SEG Y files may be downloaded and processed with commercial or public domain software such as Seismic Unix (Cohen and Stockwell, 2005). See the How To Download SEG Y Data page for download instructions. The printable profiles provided here are GIF images that were processed and gained using SU software; refer to the Software page for links to example SU processing scripts. The processed SEG Y data were also exported to Chesapeake Technology, Inc. (CTI) SonarWeb software to produce a geospatially interactive version of the profile that allows the user to obtain a geographic location and depth from the profile for a given cursor position; this information is displayed in the status bar of the browser. Please note that clicking on the profile image switches it to "Expanded View" (a compressed image of the entire line) and cursor tracking is not available in this mode.

Florida↗

USGS2021

Integrating high-resolution coastal acidification monitoring data across seven United States estuaries

Beginning in 2015, the United States Environmental Protection Agency’s (EPA’s) National Estuary Program (NEP) started a collaboration with partners in seven estuaries along the East Coast (Barnegat Bay; Casco Bay), West Coast (Santa Monica Bay; San Francisco Bay; Tillamook Bay), and the Gulf of Mexico (GOM) Coast (Tampa Bay; Mission-Aransas Estuary) of the United States to expand the use of autonomous monitoring of partial pressure of carbon dioxide ( p CO 2 ) and pH. Analysis of high-frequency (hourly to sub-hourly) coastal acidification data including p CO 2 , pH, temperature, salinity, and dissolved oxygen (DO) indicate that the sensors effectively captured key parameter measurements under challenging environmental conditions, allowing for an initial characterization of daily to seasonal trends in carbonate chemistry across a range of estuarine settings. Multi-year monitoring showed that across all water bodies temperature and p CO 2 covaried, suggesting that p CO 2 variability was governed, in part, by seasonal temperature changes with average p CO 2 being lower in cooler, winter months and higher in warmer, summer months. Furthermore, the timing of seasonal shifts towards increasing (or decreasing) p CO 2 varied by location and appears to be related to regional climate conditions. Specifically, p CO 2 increases began earlier in the year in warmer water, lower latitude water bodies in the GOM (Tampa Bay; Mission-Aransas Estuary) as compared with cooler water, higher latitude water bodies in the northeast (Barnegat Bay; Casco Bay), and upwelling-influenced West Coast water bodies (Tillamook Bay; Santa Monica Bay; San Francisco Bay). Results suggest that both thermal and non-thermal influences are important drivers of p CO 2 in Tampa Bay and Mission-Aransas Estuary. Conversely, non-thermal processes, most notably the biogeochemical structure of coastal upwelling, appear to be largely responsible for the observed p CO 2 values in West Coast water bodies. The co-occurrence of high salinity, high p CO 2 , low DO, and low temperature water in Santa Monica Bay and San Francisco Bay characterize the coastal upwelling paradigm that is also evident in Tillamook Bay when upwelling dominates freshwater runoff and local processes. These data demonstrate that high-quality carbonate chemistry observations can be recorded from estuarine environments using autonomous sensors originally designed for open-ocean settings.

California, Florida, Maine, New Jersey, Oregon, Te↗

USGS1999

The evolutionary history of steelhead ( Oncorhynchus mykiss ) along the US Pacific Coast: Developing a conservation strategy using genetic diversity

Changes in genetic variation across a species range may indicate patterns of population structure resulting from past ecological and demographic events that are otherwise difficult to infer and thus provide insight into evolutionary development. Genetic data is used, drawn from 11 microsatellite loci amplified from anadromous steelhead ( Oncorhynchus mykiss ) sampled throughout its range in the eastern Pacific Ocean, to explore population structure at the southern edge in California. Steelhead populations in this region represent less than 10% of their reported historic abundance and survive in very small populations found in fragmented habitats. Genetic data derived from three independent molecular systems (allozymes, mtDNA, and microsatellites) have shown that the southernmost populations are characterized by a relatively high genetic diversity. Two hypothetical models supporting genetic population substructure such as observed were considered: (1) range expansion with founder-flush effects and subsequent population decline; (2) a second Pleistocene radiation from the Gulf of California. Using genetic and climatic data, a second Pleistocene refugium contributing to a southern ecotone seems more feasible. These data support strong conservation measures based on genetic diversity be developed to ensure the survival of this uniquely diverse gene pool.

ICES Journal of Marine Science↗

USGS1992

The Galileo Solid-State Imaging experiment

The Solid State Imaging (SSI) experiment on the Galileo Orbiter spacecraft utilizes a high-resolution (1500 mm focal length) television camera with an 800 ?? 800 pixel virtual-phase, charge-coupled detector. It is designed to return images of Jupiter and its satellites that are characterized by a combination of sensitivity levels, spatial resolution, geometric fiedelity, and spectral range unmatched by imaging data obtained previously. The spectral range extends from approximately 375 to 1100 nm and only in the near ultra-violet region (??? 350 nm) is the spectral coverage reduced from previous missions. The camera is approximately 100 times more sensitive than those used in the Voyager mission, and, because of the nature of the satellite encounters, will produce images with approximately 100 times the ground resolution (i.e., ??? 50 m lp-1) on the Galilean satellites. We describe aspects of the detector including its sensitivity to energetic particle radiation and how the requirements for a large full-well capacity and long-term stability in operating voltages led to the choice of the virtual phase chip. The F/8.5 camera system can reach point sources of V(mag) ??? 11 with S/N ??? 10 and extended sources with surface brightness as low as 20 kR in its highest gain state and longest exposure mode. We describe the performance of the system as determined by ground calibration and the improvements that have been made to the telescope (same basic catadioptric design that was used in Mariner 10 and the Voyager high-resolution cameras) to reduce the scattered light reaching the detector. The images are linearly digitized 8-bits deep and, after flat-fielding, are cosmetically clean. Information 'preserving' and 'non-preserving' on-board data compression capabilities are outlined. A special "summation" mode, designed for use deep in the Jovian radiation belts, near Io, is also described. The detector is 'preflashed' before each exposure to ensure the photometric linearity. The dynamic range is spread over 3 gain states and an exposure range from 4.17 ms to 51.2 s. A low-level of radial, third-order, geometric distortion has been measured in the raw images that is entirely due to the optical design. The distortion is of the pincushion type and amounts to about 1.2 pixels in the corners of the images. It is expected to be very stable. We discuss the measurement objectives of the SSI experiment in the Jupiter system and emphasize their relationships to those of other experiments in the Galileo project. We outline objectives for Jupiter atmospheric science, noting the relationship of SSI data to that to be returned by experiments on the atmospheric entry Probe. We also outline SSI objectives for satellite surfaces, ring structure, and 'darkside' (e.g., aurorae, lightning, etc.) experiments. Proposed cruise measurement objectives that relate to encounters at Venus, Moon, Earth, Gaspra, and, possibly, Ida are also briefly outlined. The article concludes with a description of a 'fully distributed' data analysis system (HIIPS) that SSI team members intend to use at their home institutions. We also list the nature of systematic data products that will become available to the scientific community. Finally, we append a short 'historical' note outlining the responsibilities and roles of institutions and individuals that have been involved in the 14 year development of the SSI experiment so far. ?? 1992 Kluwer Academic Publishers.

Space Science Reviews↗

USGS2015

California State Waters Map Series — Offshore of Point Reyes, California

This publication about the Offshore of Point Reyes map area includes ten map sheets that contain explanatory text, in addition to this descriptive pamphlet and a data catalog of geographic information system (GIS) files. Sheets 1, 2, and 3 combine data from four different sonar surveys to generate comprehensive high-resolution bathymetry and acoustic-backscatter coverage of the map area. These data reveal a range of physiographic features (highlighted in the perspective views on sheet 4) such as the flat, sediment-covered seafloor in Drakes Bay, as well as abundant “scour depressions” on the Bodega Head–Tomales Point shelf (see sheet 9) and local, tectonically controlled bedrock uplifts. To validate geological and biological interpretations of the sonar data shown in sheets 1, 2, and 3, the U.S. Geological Survey towed a camera sled over specific offshore locations, collecting both video and photographic imagery; these “ground-truth” surveying data are summarized on sheet 6. Sheet 5 is a “seafloor character” map, which classifies the seafloor on the basis of depth, slope, rugosity (ruggedness), and backscatter intensity and which is further informed by the ground-truth-survey imagery. Sheet 7 is a map of “potential habitats,” which are delineated on the basis of substrate type, geomorphology, seafloor process, or other attributes that may provide a habitat for a specific species or assemblage of organisms. Sheet 8 compiles representative seismic-reflection profiles from the map area, providing information on the subsurface stratigraphy and structure of the map area. Sheet 9 shows the distribution and thickness of young sediment (deposited over the last about 21,000 years, during the most recent sea-level rise) in both the map area and the larger Salt Point to Drakes Bay region, interpreted on the basis of the seismic-reflection data, and it identifies the Offshore of Point Reyes map area as lying within the Bodega Head–Tomales Point shelf, Point Reyes bar, and Bolinas shelf domains. Sheet 10 is a geologic map that merges onshore geologic mapping (compiled from existing maps by the California Geological Survey) and new offshore geologic mapping that is based on integration of high-resolution bathymetry and backscatter imagery (sheets 1, 2, 3), seafloor-sediment and rock samples (Reid and others, 2006), digital camera and video imagery (sheet 6), and high-resolution seismic-reflection profiles (sheet 8), as well as aerial-photographic interpretation of nearshore areas. The information provided by the map sheets, pamphlet, and data catalog have a broad range of applications. High-resolution bathymetry, acoustic backscatter, ground-truth-surveying imagery, and habitat mapping all contribute to habitat characterization and ecosystem-based management by providing essential data for delineation of marine protected areas and ecosystem restoration. Many of the maps provide high-resolution baselines that will be critical for monitoring environmental change associated with climate change, coastal development, or other forcings. High-resolution bathymetry is a critical component for modeling coastal flooding caused by storms and tsunamis, as well as inundation associated with longer term sea-level rise. Seismic-reflection and bathymetric data help characterize earthquake and tsunami sources, critical for natural-hazard assessments of coastal zones. Information on sediment distribution and thickness is essential to the understanding of local and regional sediment transport, as well as the development of regional sediment-management plans. In addition, siting of any new offshore infrastructure (for example, pipelines, cables, or renewable-energy facilities) will depend on high-resolution mapping. Finally, this mapping will both stimulate and enable new scientific research and also raise public awareness of, and education about, coastal environments and issues.

California↗

USGS2010

Biocomplexity in mangrove ecosystems

Mangroves are an ecological assemblage of trees and shrubs adapted to grow in intertidal environments along tropical coasts. Despite repeated demonstration of their economic and societal value, more than 50% of the world's mangroves have been destroyed, 35% in the past two decades to aquaculture and coastal development, altered hydrology, sea-level rise, and nutrient overenrichment. Variations in the structure and function of mangrove ecosystems have generally been described solely on the basis of a hierarchical classification of the physical characteristics of the intertidal environment, including climate, geomorphology, topography, and hydrology. Here, we use the concept of emergent properties at multiple levels within a hierarchical framework to review how the interplay between specialized adaptations and extreme trait plasticity that characterizes mangroves and intertidal environments gives rise to the biocomplexity that distinguishes mangrove ecosystems. The traits that allow mangroves to tolerate variable salinity, flooding, and nutrient availability influence ecosystem processes and ultimately the services they provide. We conclude that an integrated research strategy using emergent properties in empirical and theoretical studies provides a holistic approach for understanding and managing mangrove ecosystems.

Annual Review of Marine Science↗