SEARCH · USGS Science

Results for “International Journal for Disaster Risk Reduction”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

1,443 records · Page 51Linked to original sources

USGS2025

3D Converted wave reverse time migration imaging

We describe a newly developed method for recovering high-resolution images of seismic discontinuities, such as subducting slabs, in 3D. Our method makes use of converted S → P or P → S waves observed by dense arrays of seismometers to infer the locations and relative strengths of seismic discontinuities at depth in a target region. Observed direct and converted waves are backpropagated to their times of origin. The time-reversed wavefield is then separated into its constituent P and S components via the Helmholtz decomposition, and those separated wavefields are used to compute imaging functions that characterize the locations and relative strengths of seismic discontinuities. Imaging functions may be designed to use either S → P or P → S waves, so that users can target those arrivals expected to be most dominant in a given dataset. We have previously demonstrated the efficacy of our method in two dimensions, and we now present a 3D implementation of our technique which addresses the significant computational challenges posed by the size of volumetric wavefield data in three dimensions. Through a series of synthetic examples, we demonstrate that our method is capable of recovering the fine scale structure of a subducting slab given realistic station coverage and earthquake sources. We investigate optimal seismic station geometries for our technique and explore image interpretability in regions with poor data coverage. We find that linear station geometries yield more optimal, interpretable imaging functions than collections of small arrays can. We also show that our method can successfully recover bothS → P or P → S images when realistic shear earthquake sources are used, and we explore the additional computational challenges presented by the high frequency content of S waves. Our results demonstrate the potential for our technique to recover high-resolution information about subducting slabs in real-world regions, given that relatively sparse seismic arrays with only approximately 100 stations are capable of recovering interpretable imaging functions from just a few realistic earthquake sources for multiple discontinuities at significant depth in an area of approximately 400~sq~km.

Seismica↗

USGS2024

Environmental monitoring of groundwater, surface water, and soil at the Ammonium Perchlorate Rocket Motor Destruction Facility at the Letterkenny Army Depot, Chambersburg, Pennsylvania, 2021

Letterkenny Army Depot in Chambersburg, Pennsylvania, built an Ammonium Perchlorate Rocket Motor Destruction (ARMD) Facility in 2016 to centralize rocket motor destruction and contain all waste during the destruction process. The U.S. Geological Survey has collected environmental samples from groundwater, surface water, and soils at ARMD since 2016. During 2021, samples were collected from four groundwater wells in September, one surface-water site in October, and five soil sites in November near the facility. Samples were analyzed for nutrients, trace metals, major ions, total volatile organic compounds, and perchlorate. Perchlorate was not detected in any 2021 samples. Groundwater results showed no constituents exceeded any U.S. Environmental Protection Agency (EPA) maximum contaminant level (MCL). Dissolved arsenic (As) was detected in one well above the reporting detection level (RDL) of 3 micrograms per liter (μg/L) at 5.4 μg/L but below its MCL of 10 μg/L. Dissolved iron (Fe) was the only inorganic constituent measured above an EPA secondary maximum contaminant level (SMCL). All groundwater samples collected in 2021 exceeded the Fe SMCL of 300 μg/L, with concentrations ranging from 390 μg/L to 3,500 μg/L. Surface-water data collected during 2021 showed no measured constituents in the surface-water sample that exceeded any EPA MCL or SMCL. Soil samples collected from 2016 through 2021 showed all concentrations of As exceeded the EPA soil screening levels of 3 milligrams per kilogram (mg/kg) but did not exceed the Pennsylvania medium-specific concentrations for As of 61 mg/kg. Arsenic concentrations in 2021 ranged from 9.1 mg/kg to 12.9 mg/kg. The 2021 results for the ARMD Facility indicate no increases in concentrations of reported compounds compared to data from 2016 to 2020. The contained burn treatment facility for demilitarization of rocket motors during 2021 appears to have operated without elevating concentrations of target compounds compared to previous years.

Pennsylvania↗

USGS2025

Examining the compositional selectivity of hydrocarbon oxidation products using liquid–liquid extraction and solid-phase extraction techniques

The effect of extraction methods on detecting hydrocarbon oxidation products (HOPs) in groundwater remains unclear. HOPs are polar, water-soluble byproducts of petroleum biodegradation. Our previous work showed that liquid–liquid extraction (LLE), a method commonly used in regulatory monitoring, has a significantly lower extraction efficiency for HOPs compared to solid-phase extraction (SPE). In this study, we evaluate the analytical limitations and compositional selectivity of LLE and SPE using groundwater samples from the Bemidji, MN, crude oil spill site. Optical properties were characterized using excitation–emission matrix spectroscopy (EEMs), and a three-component PARAFAC model was validated, showing consistent trends across both extracts and whole water samples. Ultrahigh-resolution mass spectrometry (UHR-MS) revealed that LLE selectively recovered aliphatic-like compounds but underrepresented more polar oxygenated HOPs. In contrast, SPE methods were more effective at isolating highly oxidized compound classes. These differences were consistent across a gradient of contamination. Overall, the LLE was less precise and less representative of polar HOPs, introducing bias in the characterization of HOPs. This study is the first to quantitatively demonstrate the compositional selectivity and analytical bias of LLE versus SPE for HOPs using combined EEM-PARAFAC and UHR-MS techniques, with implications for long-term monitoring and site assessment protocols.

Environmental Science and Technology↗

USGS2024

The 3D Elevation Program—Supporting New Hampshire’s economy

Introduction The topography of New Hampshire ranges from the Coastal Lowlands to the Eastern New England Upland to the White Mountains region. High-quality statewide elevation data are useful in managing this very diverse landscape. For example, the short coastline, including the Great Bay estuary and the Hampton-Seabrook marshes, is of disproportionately high value to New Hampshire’s tourist economy. The vulnerability of the coast to the effects of sea-level rise underscores the need for accurate, high-quality nearshore topographic elevation data and offshore bathymetric data to effectively manage the coast’s valuable resources, which include important fisheries, habitat, and infrastructure. Another important use for accurate elevation data in New Hampshire is in the evaluation of flood hazards and their potential environmental and infrastructure effects. This evaluation includes mapping of inundation and sediment transport, and assessing the associated costs of flooding. Addressing this challenge requires detailed knowledge of both surface topography and inland bathymetry. Other important activities having a substantial economic element and needing accurate elevation data include geologic resource assessment and hazard mitigation, urban and regional planning, infrastructure and construction management, and cultural resources preservation and management. Critical applications that meet the State’s management needs depend on light detection and ranging (lidar) data that provide a highly detailed three-dimensional model of the Earth’s surface and aboveground features.

New Hampshire↗

USGS2026

Understanding the resource potential of natural hydrogen on Earth: Scientific gaps, uncertainties and recommendations

A comprehensive scientific research roadmap is essential to bridge knowledge gaps and deepen the understanding of key geological, geochemical, and geophysical aspects of natural hydrogen (H 2 ) as a potential new energy resource. This paper reviews major scientific uncertainties on natural H 2 , suggesting research priorities, as a guide for defining exploration strategies, techniques, and data interpretation. The uncertainties concern all phases of the natural H 2 cycle, from generation (source rocks) through migration (advection and diffusion) and accumulation (reservoir and cap rocks) to the application and interpretation of subsurface and surface geochemical and geophysical exploration techniques. Understanding H 2 sources and generation rates (the amount of H 2 generated by a given volume of rock over time) is crucial for determining whether a geological H 2 system operates as a short-term dynamic system with rapid H 2 production and release, or as a conventional gas system with long-term accumulations, analogous to petroleum reservoirs. Preliminary estimates for serpentinisation, radiolysis, and organic matter degradation suggest that H 2 generation is not inherently fast, especially for non-hydrothermal continental systems (crystalline basement of shields, ophiolites, peridotite massifs, sedimentary basins), and long-term accumulations, like those of fossil natural gas systems, represent the most likely scenario. The mechanisms of H 2 migration through geological formations require application of fundamental principles of fluid-flow physics, distinguishing advection and diffusion, as well as their forms (from gas-phase, bubble flows to aqueous solutions). Additional studies of H 2 accumulation and retention in subsurface reservoirs could improve understanding of mechanisms of H 2 migration by focusing on the rock fluid-bearing properties and the factors affecting H 2 preservation, such as the presence of cap rocks impermeable to H 2 , pressure conditions, residence times, and microbial or abiotic consumption. Advanced techniques, including reservoir modelling, flow simulations, 3D imaging (micro-CT) of H 2 -bearing rocks, and extraction and analysis of gas occluded in rocks, can provide insights into the stability and potential recoverability of H 2 accumulations. The interpretation of surface exploration techniques, including gas geochemistry, geophysics, and remote sensing, long employed in mineral and energy resource exploration, is now being adapted for natural H 2 studies, but challenges remain in the data interpretation. Distinguishing H 2 seepage due to geological degassing from H 2 produced near the surface by modern microbial processes or artificial sources, such as hammering or drilling for soil-gas sampling, drilling into aquifers, and corrosion in boreholes, is an essential step in exploration. The simple detection of H 2 in soils, even in morphological structures like sub-circular depressions or “fairy circles”, cannot be cursorily interpreted as a signal of natural H 2 seepage from a deep source. A holistic geochemical approach, including isotopic analyses of gases associated with H 2 , is recommended to distinguish among the variety of possible H 2 origins. Observations of H 2 in wells should be interrogated to rule out possible artifacts such as corrosion and drill bit metamorphism. The integration of multiple geophysical methods, including seismic, gravimetric, magnetic, and electro-magnetic surveys, is recommended to mitigate interpretation ambiguities regarding the structure of a subsurface H 2 system (source and reservoir rocks, including fluid and gas storage), due to the non-uniqueness of rock-specific physical properties.

Earth-Science Reviews↗

USGS2025

Flood-Inundation Maps of the Current and Jacks Fork Rivers including the Ozark National Scenic Riverways, Southeast Missouri, 2023

Digital flood-inundation maps for a 131.8-mile reach of the Current River and a 44.6-mile reach of the Jacks Fork River, in southeast Missouri, were created by the U.S. Geological Survey (USGS) in cooperation with the Ozark Foothills Regional Planning Commission and the South Central Ozark Council of Governments. The maps also encompass the 134 miles of the Current and Jacks Fork Rivers within the Ozark National Scenic Riverways, which is the first national park area to protect a river system. The flood-inundation maps, which can be accessed through the USGS Flood Inundation Mapping Program website at https://water.usgs.gov/osw/flood_inundation/ , depict estimates of the areal extent and depth of flooding corresponding to selected water levels (hereafter referred to as “stages”) at eight reference USGS streamgages—five on the Current River (USGS station numbers 07064440, 07064533, 07066510, 07067000, and 07068000) and three on the Jacks Fork River (USGS station numbers 07065200, 07065495, and 07066000). Near-real-time stages at these streamgages may be obtained from the USGS National Water Information System at https://doi.org/10.5066/F7P55KJN or the National Weather Service National Water Prediction Service at http://water.noaa.gov/ , which also forecasts flood hydrographs at four of these sites (USGS station numbers 07067000, 07068000, 07065495, and 07066000). Flood profiles were computed for seven of the eight map reaches by means of two-dimensional hydraulic models and the remaining reach by a one-dimensional hydraulic model. The models were calibrated by using stage-streamflow relations or streamflow measurements at the USGS streamgages and from high-flow stage measurements from water-level loggers distributed throughout the reaches. The hydraulic models were used to compute water-surface profiles for flood stages at 1-foot intervals referenced to the streamgage datums. The profile stages ranged from the National Weather Service “action stage” or near bankfull, to a stage exceeding the highest recorded water level at each streamgage. The simulated water-surface profiles were then combined with a digital elevation model (derived from light detection and ranging data having a nonvegetated vertical accuracy of a maximum 10-centimeter root mean square error) to delineate the area flooded at each water level and the associated water depths. The availability of these maps, along with information regarding current stage from the USGS streamgage and forecasted high-flow stages from the National Weather Service, will provide emergency management personnel, resource managers, and residents with information that is critical for flood-response activities such as evacuations and road closures, as well as for postflood recovery efforts.

Missouri↗

USGS2025

Geochemical processes related to mined, milled, or natural metal deposits in a rapidly changing global environment

The demand for metals and raw materials, such as nickel and copper, has been projected to expand in the coming decades, driven by the global energy transition, the need for green technologies, and expanding infrastructure. Consequently, the increasing extraction and production of mining waste can have adverse impacts on surrounding environments and human health. The aim of this thematic collection is to fill critical knowledge gaps in the present-day cycles of metal(loid)s from source to larger sinks, and the effect of environmental management, anthropogenic development, and climate change. Altogether, the studies have been conducted in different natural settings around the world and comprise investigations in laterites, a soil-medicinal plant system, watersheds, and banded iron formations, among others. The geochemical applications in tracing mineralization, its secondary products, and/or potential impact on the immediate environment are highly diverse with applied tools ranging from isotope tracers to major and trace element systematics. Particularly the use of rare earth elements, their patterns and anomalies are methods employed by several studies in this collection. We summarize the findings to offer a potential future direction for the use of geochemical tracing techniques in resource exploration in the context of climate change and environmental challenges.

Geochemistry: Exploration, Environment, Analysis↗

USGS2026

Computing flow-field distortion coefficients from well-construction and formation properties

Direct measurements of groundwater velocity made with borehole flowmeters in screened wells must be compensated for the effects of flow-field distortion (also known as borehole acceleration). A theoretical equation developed by Drost et al. (1968) and simple inputs describing hydraulic properties of well construction and geologic formation were programmed into an Excel workbook to facilitate computation by groundwater-flowmeter users. Tables describing the physical and hydraulic properties for well constructions and gravel pack media are provided with an example to facilitate use of the workbook. Groundwater flowlines converge or diverge as they pass from a geologic formation, through a gravel pack and well screen. The extent of flowline convergence or divergence and the value of the flow-field distortion coefficient is related to the relative changes in hydraulic conductivity of the well screen, gravel pack, and geologic formation. Convergence or divergence is accompanied by acceleration or deceleration of groundwater. Direct measurements of groundwater velocity at the center of the monitoring well can be adjusted to provide a more accurate estimate of velocity in the formation by applying a correction for flow-field distortion. Variables required to compute the flow-field distortion coefficient include the hydraulic conductivity of the gravel pack, well screen, and the geologic formation surrounding the well screen; the borehole radius, and the inside radius and outside radius of the well screen.

Groundwater↗

USGS2026

A novel drive-point multilevel system to investigate PFAS and other contaminants of global concern in the hyporheic zone of a wastewater effluent dominated stream

Contaminants found in treated wastewater discharged to streams, including pharmaceuticals and per- and polyfluoroalkyl substances (PFAS), are of global concern due to their deleterious effects on aquatic ecosystems and potential impacts to human health. Hyporheic zones have strong potential for contaminant attenuation. Assessing this potential requires collection of physical and biogeochemical data within the hyporheic zone. This study tested the applicability of a novel drive-point multilevel system (DP-MLS) for quantifying head profiles and characterizing contaminant concentrations in the hyporheic zone of a temperate region effluent dominated stream (EDS). DP-MLS, each with 4 ports, were installed in the stream bed at two sites, DS-1 and DS-2, 0.2 and 4.7 km downstream of the effluent outfall, respectively. Head profiles were measured and groundwater collected for analysis of pharmaceuticals and PFAS temporally over two years. The DP-MLS withstood rapid changes in stage, ice formation, and floating debris. Vertical hydraulic gradients (VHG) were generally upward but varied in magnitude indicating heterogeneity in hydraulic conductivity and variability in flow conditions. Upward VHG were also about 2X larger at DS-1 than at DS-2. Contaminant concentration profiles consistently showed penetration of pharmaceuticals and PFAS to 1 m below the bed at DS-2 while there was less penetration, lower groundwater concentrations, and more temporal variability in concentrations at DS-1. Integration of the physical and chemical data suggests weaker upwelling conditions at DS-2 are more easily reversed during periods of high stream stage, which could facilitate migration of wastewater contaminants into the bed. However, further studies incorporating other transport processes and reach scale dynamics are required to fully characterize these exchanges. Overall, this study demonstrates the efficacy of these novel DP-MLSs for characterization of the hyporheic zone and provides new insights into the occurrence, composition, and persistence of wastewater derived contaminants in the hyporheic zone of a well-studied EDS.

Iowa↗

USGS2024

Hydrogeologic conceptual model of groundwater occurrence and brine discharge to the Dolores River in the Paradox Valley, Montrose County, Colorado

Salinity, or total dissolved solids (TDS), of the Colorado River is a major concern in the southwestern United States where the river provides water to about 40 million people for municipal and industrial use and is used to irrigate about 5.5 million acres of land. Much of the salinity in the Colorado River Basin is derived from natural interactions of surface water and groundwater with various geologic materials (rocks, soils, and alluvial deposits). The Dolores River in southwest Colorado is a major tributary of the Colorado River that historically accounts for about 6 percent of the salinity load to the Upper Colorado River Basin with the Paradox Valley being the primary source of salinity to the Dolores River. The Paradox Valley, one of several salt-anticline valleys in the region, is a fault-bounded topographic basin aligned with and exposing an underlying salt-anticline core. Salt deposits in the Pennsylvanian Paradox Formation of the Hermosa Group form an elongated salt diapir oriented northwest to southeast that is up to 12,000 feet (ft) thick beneath the present valley floor. Surface erosion, groundwater circulation, and weathering during Tertiary and Quaternary valley formation contributed to development of a cap rock, collapse features, breccia, and brine at the top of the exposed salt diapir. Today (2023), brine occurring in the brecciated cap rock and underlying salt deposits is in hydraulic connection with an overlying freshwater alluvial aquifer, and depending on seasonal river stage and hydrologic conditions, the brine discharges to the Dolores River causing the observed increase in salinity as the river crosses the Paradox Valley. To reduce salinity concentrations in the Dolores River, the Bureau of Reclamation (Reclamation) operates the Paradox Valley Unit (PVU). The PVU project consists of nine shallow brine pumping wells near the Dolores River and one deep disposal well where the brine is injected for disposal. When operational, the PVU pumping wells extract brine from the base of the alluvial aquifer that is piped and injected into a deep disposal well about 3 miles southwest of the PVU. The PVU became fully operational July 1, 1996, and by 2015, operation of the PVU had reduced salinity concentrations in the Dolores River by as much as 70 percent compared to pre-PVU conditions. In response to a 4.5 magnitude earthquake, injection operations, and thus PVU pumping, were ceased from March 2019 to June 2022. A trial period of PVU operation began in June 2022 with a reduced injection rate, and thus PVU pumping rate, of about two-thirds capacity to gather additional information and guide future operational decisions. In cooperation with Reclamation, the U.S. Geological Survey (USGS) developed this report to present the current (2023) understanding of groundwater and brine occurrence and discharge to the Dolores River in the Paradox Valley. Results from the compilation of spatial datasets, groundwater sampling and age dating, and aquifer tests are presented to provide improved understanding of the Paradox Valley hydrogeology, to supply datasets for a numerical groundwater-flow and brine-transport model, and to support future operations of the PVU. The hydrogeologic data provided herein, along with the most recent loading analysis for the Dolores River in the Paradox Valley, and a previous conceptual model for brine discharge to the river are used to present a conceptual understanding of groundwater occurrence in the Paradox Valley.

Colorado↗

USGS2025

Lithium from magma to mine in an early Yellowstone hotspot caldera

Renewable energy technologies rely on the extraction of metals not historically in high demand, such as lithium (Li), for which ore deposit models are incompletely understood. One of the world’s largest Li deposits is hosted in lake sediments of the 16.4 Ma McDermitt caldera, which formed during the early stages of Yellowstone hotspot volcanism in the western United States. Eruptive and posteruptive mobility of Li are major challenges in elucidating deposit formation. Melt inclusions preserved in quartz crystals provide a means to assess pre-eruptive magmatic Li contents. Concentrations of Li determined by ion microprobe for melt inclusions in a McDermitt rhyolite lava are 400−1350 ppm, compared to 20−70 ppm Li in matrix rhyolite glasses. Synthesis with melt inclusion data for eight additional calderas demonstrates a recurrence of Li-rich rhyolitic magmas (200−2000 ppm Li) in the western part of the Yellowstone hotspot track. However, unlike the multicyclic caldera complexes with overlapping fault networks that may have compromised Li retention, the McDermitt caldera remained a closed hydrologic system throughout its evolution. Modeling indicates 100 km 3 of resurgent magma could yield 25−150 Mt Li in a magmatic fluid and supports accumulation of Li-rich magmatic fluid in a closed intracaldera lake, followed by evaporative concentration and sequestration of Li within clay minerals to generate the McDermitt deposit.

Idaho, Nevada, Oregon, Wyoming↗

USGS2026

Temporal and spatial changes in seismic attenuation associated with inferred fluid migration in the 2016 central Apennines earthquake sequence

Prior work suggests that high‐frequency seismic attenuation acts as a highly sensitive proxy for crustal permeability and fluid mobility in fractured media. We test the hypothesis that the fault system responsible for the 2016–2017 Amatrice–Visso–Norcia–Capitignano sequence acted as an impermeable seal, compartmentalizing pressurized fluids until dynamic rupture triggered widespread fluid diffusion. By tracking across the sequence the spatiotemporal evolution of the S ‐wave anelastic attenuation parameter, we identify large, positive low‐frequency attenuation anomalies emerging within the hanging wall following the Amatrice mainshock and strictly preceding subsequent large ruptures. Conversely, we observe weaker, negative anomalies in the footwall, anticorrelated in time with those of the hanging wall, revealing a massive asymmetry in fluid redistribution and permeability evolution across the fault system. Furthermore, aftershock migration rates reveal distinct linear alignments in a distance‐reduced time space, allowing us to explicitly track and quantify episodes of lateral and upward fluid migration. These physically consistent patterns suggest that stress‐driven fluid diffusion directly weakens adjacent fault patches, dictating the spatiotemporal migration of seismicity. We conclude that near‐real‐time monitoring of seismic attenuation may help detect fluid redistribution in active fault systems and may provide useful information for time‐dependent seismic hazard assessment.

central Apennines↗

USGS2023

Stream sediment geochemistry in mineral exploration: A review of fine-fraction, clay-fraction, bulk leach gold, heavy mineral concentrate and indicator mineral chemistry

Stream sediment surveys support early-stage reconnaissance mineral exploration and regional assessment programmes, enhanced by recent improvements in analytical method detection limits, continuously improving mineral chemistry, and new approaches to the interpretation of geochemical data. Sediment surveys may be used to predict catchment basin lithology, mineralization type based on pathfinder geochemistry, and geological features based on indicator mineral chemistry. Sediment surveys that target a finer-fraction sediment sample led to the discovery of the La Colosa gold deposit, Colombia. The Batu Hijau porphyry Cu–Au deposit in Indonesia was discovered based on an anomalous clay-sized fraction sample 12 km downstream. In an arid region with poorly developed drainages and minor topographic relief, the Ag-base-metal Navidad District in Argentina was discovered with clay-fraction sediment geochemistry. Heavy mineral concentrate (HMC) sediment surveys that include mineral chemistry determinations have led to global diamond discoveries. HMC surveys contributed to discovery of the Ring of Fire Ni–Cu–PGE and chromite district, Ontario, Canada. Discoveries and geochemical mapping can assist advancement of the application of stream sediment geochemistry in those global areas for which lithologies and deposits are exposed. Stream sediment surveys continue to be one of the most cost-effective geochemical methods for covering large areas for mineral exploration.

Geochemistry: Exploration, Environment, Analysis↗

USGS2026

Critical minerals in zinc ore—An update on Earth Mapping Resources Initiative Research in the Boulder Batholith region, Montana

Plain Language Summary U.S. Geological Survey research, in collaboration with Montana Technical University and Montana Bureau of Geology and Mines, is providing key critical mineral information that may have potential for critical mineral production of several mining districts in the Boulder Batholith region, to better understand the abundance and distribution of natural resources within this region. Continued research can be used to show the potential for previously undiscovered critical mineral resources in southwestern Montana and in other parts of the United States.

Montana↗

USGS2025

Characterization and validation of tidally calibrated strains from the Alto Tiberina Near Fault Observatory Strainmeter Array (TABOO-NFO-STAR)

Six horizontal borehole tensor strainmeters (TSM1-6) installed from Fall 2021 to Spring 2022 comprise the Alto Tiberina Near Fault Observatory Strainmeter Array (STAR), providing an unprecedented opportunity to investigate seismic and aseismic deformation from hazardous high- and low-angle normal faults in Italy. Prior to use in tectonic applications, they require in-situ calibration and correction for non-tectonic signals. We tidally calibrate the instruments, characterize the calibration uncertainty, and test the results against environmental and earthquake signals originating from local to teleseismic distances. The STAR sites demonstrably deviate from assumptions common to the standard manufacturer's calibrations, including negative areal coupling at TSM3-6. While the tidally calibrated strains have ~3-56% uncertainty, the calibrated dynamic strains show interstation precision and accuracy to nanostrain levels, and static coseismic offsets in the array footprint are within uncertainty. TSM3 records a complex series of strains that may arise from dynamically triggered near-borehole fracture slip and fluid flow that does not appear to affect its sensitivity to lower strain rate deformation. Future calibration improvement may be afforded with longer stable timeseries, particularly for TSM4. Overall, our analyses demonstrate expanded geodetic capability for detecting deformation in the Alto Tiberina Near Fault Observatory.

Alto Tiberina Near Fault Observatory↗

USGS2023

The Saudi Geological Survey-U.S. Geological Survey northern Harrat Rahat project—Styles, rates, causes, and hazards of volcanism near Al Madīnah al Munawwarah, Kingdom of Saudi Arabia

Active volcanic systems pose serious hazards to people and property including inundation and incineration by lava, blanketing by tephra (volcanic ash), exposure to noxious volcanic gases, and damage from shallow earthquakes triggered by ascending molten material (magma). To improve understanding of volcanism and associated seismicity on the western Arabia Plate, the Saudi Geological Survey and the U.S. Geological Survey conducted a multi-year investigation of the northern Harrat Rahat volcanic field adjacent to the city of Al Madīnah al Munawwarah, Kingdom of Saudi Arabia. Project components included creation of a high-resolution digital topographic base; interpretation of eruptive history supported by detailed geologic mapping, paleomagnetism, and abundant high-precision geochronology of volcanic deposits; assessments of eruptive styles and volcanic hazards by physical volcanology; investigation of the origins of magmas in the mantle and of their differentiation in the crust revealed by chemical and isotopic petrology; gravity and magnetotelluric surveys to reveal crustal structures and to search for magma reservoirs; and regional and local seismic tomography and analyses of seismic hazards. Project results are presented in this Professional Paper as chapters written for technical scientific audiences. This initial chapter introduces the project and briefly summarizes results in plain language for readers who have more general backgrounds.

Al Madīnah al Munawwarah↗

USGS2025

Spatiotemporal variability of algal biomass and nitrate in Owasco and Seneca Lakes in the Finger Lakes Region, New York, in 2019

Cyanobacterial harmful algal blooms (CyanoHABs) have become increasingly common, threatening the security of water resources globally. The U.S. Geological Survey conducted high-resolution nearshore mapping surveys using boat-mounted multiparameter sondes and nitrate sensors during the summer and fall of 2019 on Owasco Lake and Seneca Lake, two lakes with documented CyanoHABs in the Finger Lakes region of New York State. Discrete sensor measurements and water-quality samples were collected at fixed points along survey routes and continuous data were generated at open-water monitoring platforms. This investigation examined whether water-quality information from nearshore surveys was representative of open-water conditions and if nearshore surveys could be used to identify areas with localized nearshore CyanoHABs and potential sources of nutrients not captured by tributary sampling. In addition to comparisons across methods, nearshore concentrations of nitrate and chlorophyll were evaluated relative to tributary outlets, cyanobacterial abundance and biovolume at discrete locations, and the locations of near-surface CyanoHABs that were designated as “confirmed with high toxins” by the New York State Department of Environmental Conservation. Nitrate and chlorophyll concentrations were comparable across methods for each lake, although concentration ranges were typically higher for nearshore mapping datasets than for nearshore discrete datasets. Nearshore surveys indicated areas of nitrate enrichment that varied temporally in both lakes. Orthophosphate was not routinely detected. Across methods, median chlorophyll concentrations were higher for the summer survey than for the fall survey in Owasco Lake. Nearshore chlorophyll concentrations varied more temporally in Owasco Lake than in Seneca Lake. Phytoplankton and cyanobacterial abundance and biovolume were about five times higher in Owasco Lake than in Seneca Lake. Cyanobacteria dominated the phytoplankton community in most samples, and Microcystis comprised the bulk of the cyanobacterial biovolume. The most abundant potential cyanotoxin-producing (specifically microcystins) genera were Microcystis , Synechococcus , Aphanocapsa , and Pseudanabaena . The cyanobacterial community composition was comparable between open-water monitoring platforms and nearshore samples. Microcystins were detected in seven survey samples from Owasco Lake, in one survey sample from Seneca Lake, and in one sample each from the open-water monitoring platforms on Owasco and Seneca Lakes that were collected about 7 days before the fall surveys. Microcystin detections were not consistently associated with high cyanobacterial cell counts or cyanotoxin-producing genera. Results from nearshore surveys were comparable to open-water monitoring platforms and discrete nearshore observations in the absence of nearshore or open-water CyanoHABs in these systems during the study. Patterns of nearshore concentrations of nitrate and chlorophyll from nearshore surveys may aid in the identification of areas with localized nitrate loading and shifts in phytoplankton abundance and community composition.

New York↗

USGS2023

Eruptive history of northern Harrat Rahat—Volume, timing, and composition of volcanism over the past 1.2 million years

Harrat Rahat, one of several large, basalt-dominated volcanic fields in the western part of the Kingdom of Saudi Arabia, is a prime example of continental, intraplate volcanism. Excellent exposure makes this an outstanding site to investigate changing volcanic flux and composition through time. We present 93 40 Ar/ 39 Ar ages and 6 36 Cl surface-exposure ages for volcanic deposits throughout northern Harrat Rahat that, integrated with a new geologic map, define 12 eruptive stages. Exposed volcanic deposits in the study area erupted less than 1.2 million years ago (Ma), and 214 of 234 identified eruptions occurred less than 570 thousand years ago (ka). Two eruptions were in the Holocene, including a historically described basaltic eruption in 1256 C.E. and a trachyte eruption newly recognized as Holocene (4.2±5.2 ka). An estimated approximately 82 cubic kilometers (km 3 ; dense rock equivalent) of volcanic products can be documented as having erupted since 1.2 Ma, though this is a lower limit because of concealment of deposits older than 570 ka. Over the last 570 thousand years (k.y.), the average eruption rate was 0.14 cubic kilometers per thousand years (km 3 /k.y.), but volcanism was episodic with periods alternating between low (0.04–0.06 km 3 /k.y.) and high (0.1–0.3 km 3 /k.y.) effusion rates. Before 180 ka, eruptions vented from the volcanic field’s dominant eastern vent axis and from a subsidiary, diffuse, western vent axis. After 180 ka, volcanism focused along the eastern vent axis, and the composition of volcanism varied systematically along its length from basalt dominated in the north to trachyte dominated in the south. We hypothesize that these compositional variations younger than 180 k.y. reflect the growth of a mafic intrusive complex beneath the southern part of the vent axis, which led to the development of evolved magmas. Lastly, these new age data allow for a reassessment of the volcanic recurrence interval at northern Harrat Rahat. Based on available data, volcanism in northern Harrat Rahat over the last 180 k.y. is poorly described using a Poisson distribution with a single recurrence interval. Instead, data for northern Harrat Rahat are better described using a mixed exponential distribution that is applicable for volcanic systems characterized by two different eruptive states, where one state with a longer recurrence interval corresponding to periods of low eruption frequency and one state with a shorter recurrence interval corresponding to periods of high eruption frequency. The preferred model for northern Harrat Rahat over the last 180 k.y. uses a long recurrence interval of 4.0 k.y. and a short recurrence interval of 0.22 k.y.

Professional Paper↗