USGS Science⌕ Search

SEARCH · USGS Science

Results for “Frontiers in Marine Science”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

1,606 records · Page 51Linked to original sources
USGS2024

Environmental monitoring of groundwater, surface water, and soil at the Ammonium Perchlorate Rocket Motor Destruction Facility at the Letterkenny Army Depot, Chambersburg, Pennsylvania, 2021

Letterkenny Army Depot in Chambersburg, Pennsylvania, built an Ammonium Perchlorate Rocket Motor Destruction (ARMD) Facility in 2016 to centralize rocket motor destruction and contain all waste during the destruction process. The U.S. Geological Survey has collected environmental samples from groundwater, surface water, and soils at ARMD since 2016. During 2021, samples were collected from four groundwater wells in September, one surface-water site in October, and five soil sites in November near the facility. Samples were analyzed for nutrients, trace metals, major ions, total volatile organic compounds, and perchlorate. Perchlorate was not detected in any 2021 samples. Groundwater results showed no constituents exceeded any U.S. Environmental Protection Agency (EPA) maximum contaminant level (MCL). Dissolved arsenic (As) was detected in one well above the reporting detection level (RDL) of 3 micrograms per liter (μg/L) at 5.4 μg/L but below its MCL of 10 μg/L. Dissolved iron (Fe) was the only inorganic constituent measured above an EPA secondary maximum contaminant level (SMCL). All groundwater samples collected in 2021 exceeded the Fe SMCL of 300 μg/L, with concentrations ranging from 390 μg/L to 3,500 μg/L. Surface-water data collected during 2021 showed no measured constituents in the surface-water sample that exceeded any EPA MCL or SMCL. Soil samples collected from 2016 through 2021 showed all concentrations of As exceeded the EPA soil screening levels of 3 milligrams per kilogram (mg/kg) but did not exceed the Pennsylvania medium-specific concentrations for As of 61 mg/kg. Arsenic concentrations in 2021 ranged from 9.1 mg/kg to 12.9 mg/kg. The 2021 results for the ARMD Facility indicate no increases in concentrations of reported compounds compared to data from 2016 to 2020. The contained burn treatment facility for demilitarization of rocket motors during 2021 appears to have operated without elevating concentrations of target compounds compared to previous years.

Pennsylvania↗
USGS1976

Helium detection as a guide for uranium exploration

Helium, a byproduct of radioactive decay, may prove to be a valuable indicator of the presence and distribution of uranium deposits. Recent technological advances permit the development of instrumentation not previously adapted for this purpose. Commercially available equipment can provide high sensitivity at low cost and allow reasonable mobility for field use. A truck-mounted mass-spectrometer, tuned for helium-4, permits immediate adjustment or modification of sampling patterns in response to accumulating data. The inlet system of the spectrometer has been designed to allow flexibility in gas analyses from various sample types--soil gas, atmosphere, or gases in water. Sensitivity of the instrument is better than 50 parts of helium per 10 9 parts of gas. Replicate samples and standards can be analyzed in only 3 minutes. Helium in soil gas is being used for the initial evaluation of the technique. A hollow probe, as much as 2 m long, is driven into the ground; and a 10-cc syringe is used to purge the probe and extract the gas. This sample is then injected into the inlet system and introduced into the spectrometer at constant pressure. The output signal is displayed on a chart recorder. Investigations can be performed on a qualitative, relative basis, or on a quantitative basis by comparison to calibrated helium standards. Preliminary field testing includes studies of the responses to variations in wind speed, temperature, barometric pressure, moisture, and sampling depth over extended time periods, as well as studies of geologic controls on the helium content in soil gas. Surveys over known uranium occurrences reveal some anomalous helium distributions. This report describes an updated technological approach to an old idea: that of using helium, a byproduct of uranium radioactive decay, as an exploration tool for uranium. Helium is the sixth most abundant gas found in the earth's atmosphere (Table 1). It is an inert gas and very mobile, mixing rapidly. When the alpha particles from the radioactive decay of uranium and thorium pick up two electrons, atoms of the isotope helium-4 are formed. Several helium-4 atoms are produced from each decay series of U-238, U-235, and Th-232 (fig. 1). The half-lives of the parent isotopes are5also shown in figure 1. One gram of uranium will produce ~10 5 atoms of helium-4 per second, and one gram of thorium produces ~2.5 x 10 4 atoms of helium-4 per second (fig. 2). Calculations of the helium produced from the crust and mantle reveal that 1,125 x 10 30 atoms per year are produced, but only 7 x 10 30 atoms per year escape from the earth (Damon and Kulp, 1958). More is being produced than is being lost; in fact, the total atmospheric content of helium could be produced in only 2 million years (MacDonald, 1963)! However, all the crustal and mantle helium-4 does not degas into the atmosphere as it is formed. It is trapped in crystal lattices and in pore spaces within the earth. What this means is that there is excess helium-4 in the earth--excess, that is, compared to the atmospheric concentration in equilibrium with the helium-4 escape rate into space and the helium-4 flux from the crust and mantle (Nicolet, 1957). Near-surface pockets of high helium-4 concentrations are known, and some natural gas fields are so enriched that they are the source for commercial production of helium. Work by Roberts and others (1975) has shown high helium concentration in the soil gas associated with geothermal areas; and work by Clark and Kugler (1973), Dyck (1975), and Goldak (1974), for example, has noted high helium concentrations in soils and waters in the vicinity of uranium deposits. These latter studies certainly indicate the potential of helium detection for use as an exploration tool for uranium.

Open-File Report↗
USGS2023

Advancing subsurface investigations beyond the borehole with passive seismic horizontal-to-vertical spectral ratio and electromagnetic geophysical methods at transportation infrastructure sites in New Hampshire

The U.S. Geological Survey (USGS), in cooperation with the New Hampshire Department of Transportation (NHDOT), surveyed transportation infrastructure sites using rapidly deployable geophysical methods to assess benefits added to a comprehensive site characterization with traditional geotechnical techniques. Horizontal-to-vertical spectral-ratio (HVSR) passive-seismic and electromagnetic-induction (EMI) methods were applied at 4 sites including a roadway-stream crossing, roadway-bridge rail-trail crossing, commuter-parking expansion, and a railroad-adjacent river-cutbank slope-failure site. Additionally, ground-penetrating-radar (GPR) was used at the slope-failure site. Typically, subsurface geotechnical properties are determined from boring data; however, borings are often spaced hundreds of feet apart, potentially missing important spatial variability between boreholes. Geotechnical site characterization including geophysical surveys helped provide a more accurate characterization by using continuous or near continuous profiling. Three-component ambient noise measured with HVSR methods were used to determine resonance frequency and estimate sediment thickness. The method works when there is a strong shear-wave acoustic impedance contrast (> 2:1) between sediment and bedrock. Sediment thickness estimates from HVSR measurements were combined with boring data to make detailed maps of the bedrock surface altitude. The bulk electrical conductivity of the subsurface was indirectly measured with EMI methods and was used to identify lithologic variations, shallow bedrock, and conductive groundwater. Ground penetrating radar, which transmits pulses of electromagnetic energy into the subsurface and records the amplitude and timing of reflected signals, was used to identify bedding and changes in lithology or water content. By combining geophysical and boring data analyses, transportation projects produced more spatially comprehensive representations of geotechnical subsurface conditions than would be determined using conventional borings alone.

New Hampshire↗
USGS2025

Groundwater hydrology, groundwater and surface-water interactions, water quality, and groundwater-flow simulations for the Wet Mountain Valley alluvial aquifer, Custer and Fremont Counties, Colorado, 2017–19

In 2017, the U.S. Geological Survey, in cooperation with the Upper Arkansas Water Conservancy District, began a study to provide a comprehensive analysis of the Wet Mountain Valley alluvial aquifer, Custer and Fremont Counties, Colorado. The study included collection of data pertaining to groundwater hydrology, groundwater and surface-water interactions, and water quality in the alluvial aquifer. In addition to providing foundational information on the hydrology of the alluvial aquifer, a numerical groundwater-flow model was developed to estimate the potential effects of additional storage of groundwater in the alluvial aquifer. Groundwater-level elevation data from 30 wells were used to estimate groundwater-flow directions in the alluvial aquifer, which were generally from the southwest to northeast, away from the Sangre de Cristo Mountains and towards perennial streams in the center of the valley. Although some seasonal variation was apparent in groundwater-level elevation records, no statistically significant seasonal trends were indicated. Statistically significant long-term trends were indicated in groundwater-level elevation records for 8 of the 30 wells, and of these wells with statistically significant trends, all but 1 indicated a negative trend of groundwater-level elevations. Spatial evaluation of wells with statistically significant negative groundwater-level elevation trends showed many are in areas of denser well drilling for domestic or other uses, indicating increasing groundwater use could potentially be causing groundwater-level elevation declines. There were instances of wells with no statistically significant groundwater-level elevation trends also located in areas of greater density of well completions. Additional investigations may be necessary to more fully characterize the processes responsible for negative groundwater-level elevation trends. Streamflow gain or loss calculations were completed for low flow in 2017–19 and for high flow in 2018 in nine reaches of streams within the study area. Stream reaches of the upper Texas Creek, upper Grape Creek, upper-middle Grape Creek, and Taylor Creek displayed consistent streamflow loss in each period from 2017 to 2019. These stream reaches represent long-term sources of recharge to the alluvial aquifer. Streamflow gain or loss varies through time in other stream reaches (lower Texas Creek, lower-middle Grape Creek, lower Grape Creek below Westcliffe, and lower Grape Creek above DeWeese Reservoir). The temporally variable behavior indicates these stream reaches may be sources of groundwater recharge or areas of groundwater discharge, likely depending on temporal dynamics between the elevation of the water table and the stream. Water-quality samples were collected from 10 groundwater wells and 10 stream sites during September through November 2019. All groundwater and stream samples were analyzed for major and trace elements and stable isotopes of water. A subset of groundwater samples was also analyzed for the environmental tracers sulfur hexafluoride, tritium, and noble gases. Comparison of water-quality results to U.S. Environmental Protection Agency drinking water-quality standards indicated no constituents exceeded primary standards for human health. Spatial evaluation of water quality indicated the concentrations of various constituents are likely controlled by groundwater and surface-water interactions and by spatial variability in bedrock geology underlying the alluvial aquifer. Specifically, streams shown to gain from groundwater had water chemistry constituent compositions similar to groundwater, whereas streams exiting the Sangre de Cristo Mountains tended to have compositions consistent with snowmelt. Groundwater geochemistry appeared to be partially controlled by oxidation-reduction processes and by proximity to igneous rocks in the Wet Mountains. Environmental tracers used to estimate groundwater age indicated all sampled groundwater contained tracers representing modern recharge (approximately less than 65 years old) but mixing of premodern recharge (approximately more than 65 years old) also occurs. Spatial evaluation of environmental tracers indicated large faults may be conduits for upwelling of older groundwater. No trends were observed in groundwater age with well depth, indicating all sampled wells are located within the zone of active groundwater flow. The presence of modern groundwater in wells with statistically significant negative groundwater-level elevation trends indicates groundwater storage depletions may be partially offset by capture of modern recharge. Repeated sampling of groundwater age would be necessary, however, to determine if any trends in groundwater age exist, which may indicate changing groundwater recharge, storage, or discharge. Additional investigations could also consider quantifying groundwater age in deeper wells to more fully define the depth of active groundwater flow. A numerical groundwater-flow model was developed to estimate components of the water budget, simulate groundwater and surface-water interactions, and evaluate the potential effects of aquifer storage and recovery. Simulated groundwater-level elevations from the calibrated groundwater-flow model are similar to the observed pattern of groundwater-level elevations with higher elevations in the western part of the study area along the Sangre de Cristo Mountains. Simulated water-budget components indicate most of the recharge to the alluvial aquifer is derived from streamflow losses, which is consistent with observations of losing streams along the mountain front. The largest groundwater discharge component of the alluvial aquifer was to streams in the center of the valley, where observations of stream gain or loss indicated the predominance of gaining conditions. Comparison of groundwater and surface-water interactions between the calibrated groundwater-flow model for 2000-19 (the base-case model) and a simulation including additional recharge, representing potential aquifer storage and recovery operations, indicated the additional recharge distributed throughout the area had minimal effects on streamflow in the nearby Grape Creek. An analysis of subregional groundwater budgets showed approximately 54 percent of the additional recharge flowed back to nearby Grape Creek, and the other 46 percent was distributed laterally into adjacent cells in the alluvial aquifer. The comparison of simulations and subregional water budget show the additional recharge did not substantially alter groundwater-level elevations or basin wide groundwater storage. Although the analysis of additional recharge provided in the numerical groundwater-flow model considers only one of many possible recharge scenarios, the model provides a useful tool that could be modified for various scenarios to understand potential effects of managed aquifer recharge.

Colorado↗
USGS2024

Limited evidence of late Quaternary tectonic surface deformation in the eastern Tennessee seismic zone, USA

The ~300-km-long eastern Tennessee seismic zone (ETSZ), USA, is the second-most seismically active region east of the Rocky Mountains. Seismicity generally occurs below the Paleozoic fold-and-thrust belt within the Mesoproterozoic basement, at depths of 5–26 km, and earthquake magnitudes during the instrumental record have been moment magnitude ( M w )≤4.8. Evidence of surface deformation may not exist or be difficult to detect because of the vegetated and soil-mantled landscape, landslides, locally steep topography, anthropogenic landscape modification, or long, irregular recurrence intervals between surface-rupturing earthquakes. Despite the deep seismicity, analog models indicate that accumulation of strike-slip or oblique-slip displacement at depth could be expected to propagate upward through the Paleozoic section, producing a detectable surficial signal of distributed faulting. To identify potential surface deformation, we interrogated the landscape at different spatial scales. We evaluated morphotectonic and channel metrics, such as channel sinuosity and catchment-scale hypsometry. Additionally, we mapped possible fault-related topographic features on 1-m lidar. Finally, we integrated our observations with available bedrock and Quaternary surficial mapping and subsurface geophysical data. At a regional scale, most morphotectonic and channel metrics have a strong lithologic control. Within smaller regions of similar lithology, we observe changes in landscape metrics like channel sinuosity and catchment-scale hypsometry that spatially correlate with new lineaments identified in this study and previously mapped east–west Cenozoic faults. These faults have apparent left-lateral offsets, are optimally oriented to slip in the current stress field, and match kinematics from recent focal mechanisms, but do not clearly preserve evidence of late Pleistocene or Holocene tectonic surface deformation. Most newly mapped lineaments might be explained by either tectonic or non-tectonic origins, such as fluvial or karst processes. We also re-evaluated a previously described paleoseismic site and interpret that the exposure does not record evidence of late Pleistocene faulting but instead is explained by fluvial stratigraphy.

Tennessee↗
USGS2024

Using stable oxygen isotope dual-inlet isotope-ratio mass spectrometry to elucidate uranium transport and mixed 230Th/U calcite formation ages at the seminal Devils Hole, Nevada, natural laboratory

Rationale Vein calcite in Devils Hole has been precipitating continuously in oxygen-isotope equilibrium at a constant temperature for over 500 000 years, providing an unmatched δ 18 O paleoclimate time series. A substantial issue is that coeval calcite (based on matching δ 18 O values) has uranium-series ages differing by 12 000 years. Methods An unparalleled high-accuracy δ 18 O chronology series from continuously submerged calcite was used to correct the published uranium-series ages of non-continuously formed calcite in two cores, cyclically exposed by water-table decline during glacial–interglacial transitions. This method relies on the premise that the δ 18 O values of coevally precipitated calcite are identical, allowing matching calcite δ 18 O values to establish formation ages. Results Exposed calcite can have apparent ages that are 12 000 years too young due to unrecognized uranium mobility and resulting mixed ages identified in over 50 mixed uranium-series ages from previous studies. Secondary uranium in fluids, sourced from the formation or dissolution of porous carbonate deposits (folia) with high uranium-238 ( 238 U) concentrations, has migrated up to 10 mm into vein calcite. Conclusions The continuously submerged Devils Hole δ 18 O chronology is not explained by orbital forcing. Rather, this chronology represents a regional climate record in the southern Great Basin of sea-surface-temperature (SST) variations off California, variations that preceded the last and penultimate deglaciations by 5000 to approximately 10 000 years. Temporal discrepancies between the continuously submerged Devils Hole chronology and other regional δ 18 O records (e.g., the Leviathan chronology) can be explained by unrecognized cryptic, pernicious uranium mobility, leading to model estimations that may be thousands of years younger than actual ages. Consequently, paleo-moisture availability, water-table, and groundwater recharge models based on these mixed uranium-series ages are too young by as much as 12 000 years. The potential for post-formation uranium addition in subaerial cores and speleothems underscores the need for caution in uranium-series dating, highlighting δ 18 O time-series comparisons as a method for identifying mixed ages.

Nevada↗
USGS2024

Development of a hydrogeologic visualization model for western Sarpy County, Nebraska

Population in western Sarpy County, Nebraska, has steadily increased over the last several decades and has led to increased groundwater use for domestic purposes. To meet the increase in demand, the Papio-Missouri River Natural Resources District is seeking to use all available sources of groundwater in western Sarpy County. Additionally, elevated groundwater nitrate plus nitrite as nitrogen concentrations were detected, indicating the need to better understand the groundwater quality of the area. Although the general geology of the area is understood, the area does not have detailed information on the extent of the various aquifers, particularly the Dakota aquifer. To characterize these aquifers, the Papio-Missouri River Natural Resources District invested in airborne electromagnetic surveys of the area to better understand the subsurface geology. Although these surveys improved understanding of the groundwater systems in the area, the Papio-Missouri River Natural Resources District wanted to integrate the subsurface information with available water-quality and groundwater-level data. In response, the U.S. Geological Survey, in cooperation with the Papio-Missouri River Natural Resources District, the Nebraska Natural Resources Commission, and the Nebraska Department of Natural Resources, assembled geologic, hydrogeologic and nitrate plus nitrite as nitrogen information for the selected area into a three-dimensional visualization computer software package called GeoScene3D. The completed GeoScene3D project was assembled to provide a visualization of the groundwater systems and associated water-quality results in Sarpy County and to provide the Papio-Missouri River Natural Resources District managers with information that can be used to make more informed groundwater resource-planning decisions in the future. This report details the development of a three-dimensional model created within GeoScene3D to visualize the subsurface, particularly the Dakota Sandstone in western Sarpy County.

Nebraska↗
USGS2026

Tracking baseflow supply dynamics using SWOT data from small groundwater-dominated lakes

In situ surface-water monitoring strategies are biased towards larger perennial streams and lakes and are generally not designed to track mechanisms of baseflow supply contributed by the dynamic storage of aquifers. Additionally, small (< 1 km 2 ) groundwater-influenced lakes and wetlands globally have little in situ monitoring infrastructure. We explored the utility of remotely sensed Surface Water Ocean Topography Satellite (SWOT) data, collected from 2023 onward, to characterise the seasonal and multi-year water-level trends of groundwater flow-through kettle lakes distributed across the permeable sediments of eastern Massachusetts, USA. This analysis indicated that water levels for kettle lakes with areas down to approximately 0.05 km 2 are resolvable in the study area. Our examination of 17 kettle lakes found that SWOT water-surface elevation data closely tracked groundwater levels in adjacent monitoring wells where available, including the timing of seasonal patterns (highest levels generally in late spring), although there was some variation between years and there was a substantial lag in the timing of high water levels for a lake located downgradient from a 30-m-thick vadose zone. Furthermore, SWOT-observed water-level increases in kettle lakes tracked with baseflow increases in two adjacent groundwater-dominated streams, as would be expected from increased hydraulic gradients. Unlike spectral remote sensing, SWOT data are generally not affected by cloud cover, resulting in a potential for groundwater-dominated lakes to be sentinels of dynamic storage patterns, including identification of baseflow drought lags, which are currently ill-defined hydrological processes. SWOT monitoring of groundwater-influenced surface waters shows potential for augmenting existing monitoring wells and streamgages as continuous monitors of groundwater levels and baseflow supply in permeable terrain.

Massachusetts↗
USGS2025

Seismic moment and local magnitude scales in Ridgecrest, CA from the SCEC/USGS Community Stress Drop Validation Study

We illustrate the systematic difference between moment magnitude and local magnitude caused by underlying earthquake source physics, using seismic moments submitted to the Statewide California Earthquake Center/United States Geological Survey Community Stress Drop Validation Study 2019 Ridgecrest data set. While the relationship between seismic moment and moment magnitude ( M or M w ) of log 10 ( M 0 ) ~ 1.5* M is uniformly valid for all earthquake sizes by definition (Hanks and Kanamori, 1979), the relationship between local magnitude M L and moment is itself magnitude dependent. For moderate events, ~3< M < ~6, M and M L are coincident; for earthquakes smaller than ~3, M L ~ 1.0 log 10 M 0 (Hanks and Boore, 1984). This is a physical consequence of the corner frequency fc becoming larger than the upper frequency of observation and implies that M L and M differ systematically by a factor of 1.5 for these small events. While this idea is not new, we propose a new, continuous relationship between local magnitude and moment, for magnitudes 2 to 6 which extrapolates to smaller and larger magnitudes, applicable to southern California specific to the Ridgecrest region. We make use of the plethora of seismic moments as submitted by many participants of the Community Stress Drop study, compared to the Southern California Seismic Network (SCSN) catalog magnitudes. Overall, the seismic moments in the Community Study recover moment magnitude well, so we use our new M L - M 0 to convert M L to M , refining the SCSN operational M Lr scale. This systematic difference of 50% in slope between local and moment magnitude at small magnitudes has implications for spectral stress drop estimates, earthquake ground motion modeling, as well as other magnitude scales and earthquake occurrence statistics.

California↗
USGS2023

Eruptive history within the vicinity of Al Madīnah in northern Harrat Rahat, Kingdom of Saudi Arabia

The northernmost part of the Harrat Rahat volcanic field contains early Pleistocene to Holocene mafic eruptive products within the vicinity of the city of Al Madīnah, Kingdom of Saudi Arabia. A detailed geologic investigation into the eruptive history of a 570 square kilometer (km 2 ) area covering Al Madīnah and the surrounding area has yielded 33 mapped Quaternary volcanic units consisting of lava flows, scoria cones, and shield volcanoes. These eruptive products consist of continental, intraplate alkalic and minor transitional basalts, hawaiites, and a single mugearite that were emplaced from at least 1,014±14 thousand years ago (ka) to a single Holocene eruption in 1256 C.E. Lava flows are generally 10 to 15 kilometers (km) long (but can reach 23 km long), 1 to 3 km wide, and at least 10 meters thick. Most of the mapped units erupted episodically between 400 and 340 ka and 180 and 100 ka. Despite small individual volumes (less than 1 cubic kilometers dense rock equivalent), each unit represents eruption of a distinct magma batch that was strongly influenced by clinopyroxene, olivine, and plagioclase fractionation. Some of these units are interpreted to have undergone magma mixing pre- and (or) syneruptively. Integrating eruption ages, geochemistry, and paleomagnetic data yields evidence that some eruptions were temporally and (or) spatially clustered. Aligned scoria cones and elongate vent edifices were constructed atop fissure vent systems that reflect the local stress field, which controls dike ascent through the middle and upper crust.

Professional Paper↗
USGS2025

Pre-eruptive characteristics of “suspect” silicic magmas in Carlin-type Au-forming systems

World-class Carlin-type Au deposits hosted in sedimentary rock were formed when profuse Eocene silicic magmatism swept across northern Nevada in response to arc migration. Carlin-type Au deposits formed along with porphyry/skarn Cu-Mo-W-Au deposits, epithermal Ag-Au deposits, and distal disseminated Ag-Au deposits. But unlike these other Au-bearing deposits that have clear associations with igneous intrusions, Carlin-type ore deposits appear to have formed distant from concealed plutons, and their origin remains controversial. Despite decades of abundant geophysical, geochronological, and geochemical studies suggesting the involvement of magmas, concrete evidence for magmatic involvement is still lacking. Consequently, the involvement of contemporaneous igneous systems remains inferred based on age, proximity, and variable isotopic, geochemical, and geophysical clues. A recent synthesis of deposit models postulates that Carlin-type Au deposits are intrusion-related, but that the causative magmas reside deeper (∼6–12 km) than in typical porphyry and peripheral systems (∼3–5 km), meaning that Carlin-type deposits are perhaps more distal expressions of igneous intrusions. We investigate a collection of “suspect” magmatic systems over a ∼7 m.y. timespan (∼41–34 Ma) that are contemporaneous with and near known Carlin-type ore deposits. We report results of a multifaceted array of in situ geochemical analyses (FTIR, EMP, SHRIMP-RG, LA-ICP-MS) of quartz-hosted melt inclusions, biotite, and quartz to better characterize the pre-eruptive characteristics of these magmas. We also report results of thermobarometry and thermodynamic phase equilibria modeling to help place constraints on magmatic reservoir depths and processes. Rather than a single “flavor” of silicic magma, we observe a surprisingly broad compositional spectrum of rhyolites, with one end of the spectrum exhibiting more arc-like (I-type) characteristics and the other end displaying more post-subduction, thick-crust extensional (A-type) characteristics. This broad compositional spectrum suggests a more complex picture of silicic crustal magmatism operating over a narrow span of time during slab rollback. Despite this spectrum, magmatic systems in this study are consistently ferroan and generally peraluminous, which we interpret as an expression of the relatively elevated geotherm at the time and incorporation of variable amounts of highly peraluminous metasedimentary crustal components. The silicic magma spectrum encompasses a range of mineralization associations, including subduction-related Cu-Mo-W-Au-Ag and post-subduction, thick-crust extensional rare-metal Mo-Sn-W-F-Be-Ag-Au, consistent with the prolific and diverse array of ore deposits that formed during this time. Carlin-type Au deposition appears to be associated with nearly the entire magmatic spectrum. This apparent indifference to silicic magma “flavor” would seem to imply that if magmas are involved in Carlin-type Au deposit genesis, they perhaps do not need to be compositionally specialized and/or possibly are only relevant as heat sources driving circulation to remobilize and redistribute metals.

Nevada↗
USGS2025

Uncertainty reduction for subaerial landslide-tsunami hazards

Subaerial rock slopes may generate a tsunami by rapidly moving into the water. Large uncertainty in landslide characteristics propagates into large uncertainty in tsunami hazard, making hazard assessment more difficult for land and emergency managers. Once a potentially tsunamigenic landslide is identified, it may not be clear which landslide characteristics contribute most significantly to uncertainty in the tsunami hazard. Our aim is to document the relative worth of different landslide characteristics (e.g., size, material properties) for reducing uncertainty in landslide-tsunami hazard assessments. Isolating the relative importance of specific landslide characteristics may inform prioritization of data collection and improve efficiency in understanding hazard. To accomplish this, we generated a set of 288 landslide-tsunami simulations in which we systematically varied the size and material properties of possible failure extents at the Barry Arm landslide complex in northwestern Prince William Sound, Alaska, USA. We find that for landslides smaller than the receiving waterbody, the landslide volume has the strongest effect on resulting wave characteristics and thus the highest leverage on reducing uncertainty in tsunami hazard. In contrast, for landslides substantially larger than the waterbody, the duration of rapid movement of the landslide has the highest leverage. Based on our results, we propose a classification scheme for subaerial landslides based on the relative size of the landslide and waterbody. Additionally, our results support the generation of a tsunami height transfer function between existing tide gages and a nearby coastal city. These results have direct implications for the practice of operational early warning.

Alaska↗
USGS2025

Near-surface material and topography generate anomalous high-frequency ground motion amplification in Chugiak, Alaska

An ∼3 km long nodal array oriented approximately east–west was deployed in Chugiak, Alaska, by the U.S. Geological Survey during 2021. The array intersects with the permanent NetQuakes station NP.ARTY, where peak ground acceleration (PGA) value of 1.98 g was recorded during the 2018 M w 7.1 Anchorage, Alaska, earthquake, in sharp contrast to the PGA of ∼0.3 g at a site just 4 km to the west. Seismic data for M w 1.8–4.3 aftershocks from the M w 7.1 event recorded by the nodal array confirm the anomalously large ground motions obtained at NP.ARTY as well as similar amplifications at nodes within ∼1 km to the east. Here, we performed 0–10 Hz 3D finite‐difference simulations, including high‐resolution surface topography, to explore the cause of the unexpectedly large amplification. As expected, the simulations computed with a regional 3D tomography velocity model severely underpredict the 0–10 Hz acceleration records at almost all sites. Adding a near‐surface low‐velocity taper to 300 m depth amplifies the accelerations by up to a factor of 5 and enables a reasonable match between the nodal data and simulations at sites to the west of NP.ARTY. However, this model still underpredicts the spectral energy in the area covered by glacial sediments by up to an order of magnitude. The addition of a till layer using a depth‐dependent shear‐wave velocity ( ⁠⁠ V s ) profile along with a homogeneous, 8 m thick low‐velocity layer with V s = 250 m/s representing the kame terraces improves the fit to data to within a factor of 2 at nodes located on top of the glacial sediments. Our study shows that the anomalously large high‐frequency amplification recorded at and near NP.ARTY can be explained by a combination of topographic effects and near‐surface low‐velocity material with amplification effects on the high‐frequency ground motion by up to about 40% and an order of magnitude, respectively.

Alaska↗
USGS2025

Pediment formation and subsequent erosion in Gale crater: Clues to the climate history of Mars

Evidence of paleo-rivers, fans, deltas, lakes, and channel networks across Mars has prompted much debate about what climate conditions would permit the formation of these surface water derived features. Pediments, gently sloping erosional surfaces of low relief developed in bedrock, have also been identified on Mars. On Earth, these erosional landforms, often thought to be created by overland flow and shallow channelized runoff, are typically capped by fluvial sediments, and thus in exceptionally arid regions, pediments are interpreted to record past wet periods. Here we document the Greenheugh pediment in Gale crater, exploiting the observational capability of the Curiosity rover. The absence of a fluvial cap suggests that the pediment was likely cut by wind erosion, not fluvial processes. The pediment was then buried by an aeolian deposit (Stimson sandstone) that mantled the lower footslopes of Aeolis Mons (informally known as Mt. Sharp). This burial terminated active wind erosion, preserving the pediment surface (as an angular unconformity). Groundwater was present prior-to, during, and shortly after Stimson deposition, perhaps contributing to lithification and certainly to early diagenesis. Post lithification, wind erosion first cut canyons in the northern most footslopes (north of Vera Rubin ridge). Unlithified gravels were deposited in these canyons, likely due to runoff from Mt. Sharp. Boulder-rich fluvial and debris flow deposits built a > 70 m thick sequence (Gediz Vallis ridge) on the southern Greenheugh pediment. Continued wind erosion left elevated patches of gravel on the northern footslopes, and exposure age dating shows that erosion essentially ceased before 1 Ga (but possibly much earlier). Erosion to the south led to emergence of Vera Rubin ridge, retreat of the Greenheugh pediment, and the formation of Glen Torridon valley. Hence, this footslope environment of Mt. Sharp records climate-driven periods of wind erosion, aeolian deposition (and groundwater activity), surface runoff and sediment deposition, followed by further significant wind erosion that declined to present very slow rates. This likely occurred during the late Hesperian and possibly into the Amazonian.

Icarus↗
USGS2024

Mesoproterozoic to Paleozoic tectonics, Pleistocene landforms, and Holocene seismicity in the Blue Ridge: Results from integrated studies of the 9 August 2020, Mw 5.1 earthquake area near Sparta, North Carolina, USA

This field trip examines the results of integrated geologic studies of the 9 August 2020, M w 5.1 earthquake near Sparta, North Carolina, USA. The earthquake generated ~4 km of coseismic surface rupture of the Little River fault and uplifted a surface area of ~11 km 2 . The Little River fault is a thrust fault oriented 110–130°/45–70°SW, and mapped fault segments are en echelon with scarp heights from <5–30 cm. The epicenter is in polydeformed rocks of the Ashe and Alligator Back Metamorphic Suites in the eastern Blue Ridge. Bedrock structure formed during multiple Paleozoic orogenies; the regional foliation strikes NE-SW and dips SE (mean orientation 063°/52°SE). Mapping identified late Paleozoic veins and shear zones, a regional joint set striking 330–340° and 250–240°, and brittle faults that cut the Paleozoic foliation. Brittle faults oriented similar to the Little River fault are mapped up to 4 km along strike from the coseismic rupture along Bledsoe Creek valley, and the combined length of the Little River fault system is ~8 km. Paleoseismic trenches across the Little River fault corroborate the reactivation of an older fault by the 2020 earthquake and reveal two events during late Pleistocene (<50 ka). Surficial mapping identified several terrace deposits, including a deposit along Bledsoe Creek that yielded a 26 Al/ 10 Be isochron burial age of 0.46 ± 0.13 Ma and overlies a brittle fault, thus constraining the timing of movement of the fault at that location. Paleoliquefaction studies document soft-sediment deformation features in alluvium that may represent paleoseismic events. Collectively, these results highlight long-lived paleoseismicity of the Blue Ridge and that the 9 August 2020 earthquake reactivated an older, suitably oriented brittle fault in the bedrock. The Little River fault is an example of a previously unknown but active fault lying outside of known seismic zones with demonstrated recurrence of paleo-ruptures, raising questions about the assumption that damaging earthquakes are limited to areas of ongoing background seismicity, which is counter to seismic hazard assessments in the eastern United States. Bedrock mapping separates eastern Blue Ridge lithostratigraphy of the Lynchburg Group and Ashe and Alligator Back Metamorphic Suites into separate fault-bound packages juxtaposed over various 1.3–1.0 Ga basement rocks of the northern French Broad massif by the Gossan Lead fault.

North Carolina↗
USGS1998

Peak-discharge frequency and potential extreme peak discharge for natural streams in the Brazos River basin, Texas

The 2-, 5-, 10-, 25-, 50-, and 100-year peak discharges were estimated for 186 streamflow-gaging stations with at least 8 years of data for natural streams in and near the Brazos River Basin, Texas. Multiple regression equations were developed to estimate peak-discharge frequency for the 2-, 5-, 10-, 25-, 50-, and 100-year recurrence intervals for each of three hydrologic regions that compose the Brazos River Basin. The equations for each region are a function of significant basin characteristics (explanatory variables). The significant explanatory variables among six that were tested are the contributing drainage area and stream slope for regions 1 and 2 and the contributing drainage area for region 3. For the three sets of equations, the coefficient of determination ranges from 0.59 to 0.93, and the standard error ranges from 0.184 to 0.391 log units. A larger coefficient of determination and a lower standard error generally are associated with the equations for hydrologic regions 2 and 3. Statistics from the regression analysis allow computation of the prediction interval associated with a given significance level for a peak-discharge frequency estimate. The regression equations can be used to estimate peak discharges for sites at, near, or away from sites with streamflow-gaging stations. The potential extreme peak-discharge curves as related to contributing drainage area were estimated for each of the three hydrologic regions from measured extreme peaks of record at 186 sites with streamflow-gaging stations and from measured extreme peaks at 37 sites without streamflow-gaging stations in and near the Brazos River Basin. The potential extreme peak-discharge curves generally are similar for hydrologic regions 1 and 2, and the curve for region 3 consistently is below the curves for regions 1 and 2, which indicates smaller peak discharges.

Texas↗
USGS2025

Formation of the Mount Weld rare earth element deposit, Western Australia: A carbonatite-derived laterite

Carbonatite-hosted rare earth element (REE) deposits are the primary source of the world’s light REEs. The Mount Weld REE deposit in Western Australia is hosted in a lateritic sequence that reflects supergene enrichment of the underlying carbonatite. Water-rock interaction is a key to the formation of this world-class deposit. REE enrichment in the laterite is controlled by the breakdown of primary minerals, the release and transport of REEs, and the formation of secondary minerals. Secondary REE-bearing phosphate minerals are the primary REE-host phases in the laterite ore with monazite as the dominant phase; other REE-bearing phases include rhabdophane, cerianite, churchite, florencite, and crandallite subgroup minerals. Profiles through the laterite show that in the REE-rich zone, apatite and primary calcite and dolomite have broken down such that the loss of Ca and Mg, as well as Si and K, leads to a relative increase in the REEs. Sequestering of REEs in secondary mineral phases formed by groundwater further enhances the REE concentration.

Mount Weld Mine↗
USGS2024

Simulated mean monthly groundwater-transported nitrogen loads in watersheds on the north shore of Long Island Sound, 1993–2022

Elevated nitrogen loads are pervasive in the Long Island Sound, an estuary that receives freshwater and nutrients from both surface-water and groundwater discharge. Surface-water nitrogen loads to the Long Island Sound are relatively well characterized, but less is known about groundwater-transported nitrogen loads. Prior work on the northern shore of Long Island Sound (Connecticut and areas of New York and Rhode Island) suggested that groundwater travel times are relatively short (median less than 2 years) and that decade-long nutrient legacies are not widespread. Because the travel times are short, groundwater flow and nutrient loads likely vary substantially between months. In the current study, the U.S. Geological Survey, in cooperation with the U.S. Environmental Protection Agency’s Long Island Sound Study and the Connecticut Department of Energy and Environmental Protection, developed a set of models to better characterize spatial and temporal patterns of groundwater-transported nitrogen loading from atmospheric deposition, septic systems, and fertilizers within the study area. The models provide an estimate, with uncertainty, of groundwater-transported nitrogen loads in the study area, filling a key gap in the nitrogen budget for Long Island Sound. The models also highlight the spatial and temporal variation in nitrogen loading throughout the study area. The modeling workflow involved four models. (1) A soil-water-balance model was developed by using the Soil-Water-Balance software to simulate groundwater recharge across the study area for water years 2005 through 2022. The simulated mean monthly recharge from the soil-water-balance model was used as input into a groundwater-flow model. (2) The groundwater-flow model was developed by using the MODFLOW 6 software and data for water years 1993 through 2022 and simulates average monthly hydrologic conditions. The groundwater-flow model was calibrated by using the Iterative Ensemble Smoother method within the PEST++ software. The Iterative Ensemble Smoother method generates an ensemble of sets of parameter values, with each set producing reasonable simulated hydrologic parameter values. (3) An ensemble of MODPATH particle-tracking simulations were run to generate particle flow paths and travel times, with each simulation using a different set of the flow model parameters. (4) A nitrogen load model uses the MODPATH simulation outputs to track nitrogen from the land surface through multiple attenuation zones until it discharges into fresh or saline surface water. As with the groundwater-flow model, the nitrogen model simulated average monthly groundwater-transported nitrogen loads for water years 1993 through 2022. One novel aspect of the nitrogen load model is that the nitrogen attenuation parameters were calibrated to observed nitrogen loads. Across the ensemble of simulated nitrogen loads, the median study-area-wide monthly simulated nitrogen loads from the aquifer to Long Island Sound throughout the year ranged from 900 to 18,600 kilograms of nitrogen per day, with a median load of 5,100 kilograms of nitrogen per day. The simulated loads were based on average monthly conditions for water years 1993 through 2022. Loads were highest during the winter and early spring and lowest during the late summer. However, simulated travel times for groundwater and nitrogen loads discharged to Long Island Sound during summer were longer than travel times for groundwater and loads discharged during the winter, indicating that, on average, groundwater discharged during summer traveled along different, and longer, flow paths, than groundwater discharged during winter. This indicates that summer loads would respond more slowly to changes in nitrogen inputs at the water table than winter loads. Over the entire study area, approximately 15 percent of the simulated load is from atmospheric deposition sources, 30 to 40 percent is from fertilizer, and 50 to 60 percent is from septic systems. The final analysis of the study involved simulating the change in groundwater-transported nitrogen load in response to upgrading septic systems or reducing fertilizing inputs to areas of turf grass. Both management interventions reduced the groundwater-transported nitrogen load, and reductions were greater in areas with greater loads from septic systems or turf-grass fertilizers. The delay between management actions and substantial reductions in groundwater-transported nitrogen loads varied seasonally; loads during the late summer months remained elevated longer than the winter loads.

Connecticut, Rhode Island↗