USGS Science⌕ Search

SEARCH · USGS Science

Results for “Fire”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 919 records · Page 51Linked to original sources
USGS2018

Thresholds and relations for soil‐hydraulic and soil‐physical properties as a function of burn severity 4 years after the 2011 Las Conchas Fire, New Mexico, USA

Wildfire effects on soil‐physical and ‐hydraulic properties as a function of burn severity are poorly characterized, especially several years after wildfire. A stratified random sampling approach was used in 2015 to sample seven sites representing a spectrum of remotely sensed burn severity in the area impacted by the 2011 Las Conchas Fire in New Mexico, USA. Replicate samples from each site were analysed in the laboratory. Linear and linear indicator regression were used to assess thresholds in soil‐physical and ‐hydraulic properties and functional relations with remotely sensed burn severity. Significant thresholds were present for initial soil‐water content (θ i ) at 0–6 cm depth between the change in the Normalized Burn Ratio ( dNBR ) equal to 618–802, for bulk density (ρ b ) at 3–6 cm between dNBR equal to 416–533, for gravel fraction at 0–1 cm between dNBR equal to 416–533, for fines (the silt + clay fraction) at 0–1 cm for dNBR equal to 416–533, and for fines at 3–6 cm for dNBR equal to 293–416. Significant linear relations with dNB R were present between ρ b at 0–1 cm, loss on ignition (LOI) at 0–1 cm, gravel fraction at 0–1 cm, and the large organic fraction at 1–3 cm. No thresholds or effects on soil‐hydraulic properties of field‐saturated hydraulic conductivity or sorptivity were observed. These results suggest that ρ b and LOI at 0–1 cm have residual direct impacts from the wildfire heat impulse. The θ i threshold is most likely from delayed groundcover/vegetation recovery that increases evaporation at the highest burn severity sites. Gravel and silt + clay thresholds at 0–1 cm at the transition to high burn severity suggest surface gravel lag development from hydraulic erosion. Thresholds in ρ b from 3 to 6 cm and in silt + clay fraction from 3 to 6 cm appear to be the result of soil variability between sites rather than wildfire impacts. This work suggests that gravel‐rich soils may have increased resilience to sustained surface runoff generation and erosion following wildfire, with implications for assessments of postwildfire hydrologic and erosion recovery potential.

New Mexico↗
USGS2014

Mountain plover nest survival in relation to prairie dog and fire dynamics in shortgrass steppe

Disturbed xeric grasslands with short, sparse vegetation provide breeding habitat for mountain plovers ( Charadrius montanus ) across the western Great Plains. Maintaining local disturbance regimes through prairie dog conservation and prescribed fire may contribute to the sustainability of recently declining mountain plover populations, but these management approaches can be controversial. We estimated habitat-specific mountain plover densities and nest survival rates on black-tailed prairie dog ( Cynomys ludovicianus ) colonies and burns in the shortgrass steppe of northeastern Colorado. Mountain plover densities were similar on prairie dog colonies (5.9 birds/km 2 ; 95% CI = 4.7–7.4) and sites burned during the preceding dormant season (6.7 birds/km 2 ; 95% CI = 4.6–9.6), whereas the 29-day nest survival rate was greater on prairie dog colonies (0.81 in 2011 and 0.39 in 2012) compared to the burned sites (0.64 in 2011 and 0.17 in 2012). Reduced nest survival in 2012 compared to 2011 was associated with higher maximum daily temperatures in 2012, consistent with a previous weather-based model of mountain plover nest survival in the southern Great Plains. Measurements of mountain plover density relative to time since disturbance showed that removal of prairie dog disturbance by sylvatic plague reduced mountain plover density by 70% relative to active prairie dog colonies after 1 year. Plover densities declined at a similar rate (by 78%) at burned sites between the first and second post-burn growing season. Results indicate that black-tailed prairie dog colonies are a particularly important nesting habitat for mountain plovers in the southern Great Plains. In addition, findings suggest that prescribed burning can be a valuable means to create nesting habitat in landscapes where other types of disturbances (such as prairie dog colonies) are limited in distribution and size.

Colorado↗
USGS2009

Estimation of fuel conditions for fire danger assessment

A review of physical and chemical properties of fuels relevant for fire ignition and propagation is presented, along with different methods to estimate those properties, with special emphasis on satellite imagery. The discussion is more extended on estimating fuel moisture trends and fuel geometrical properties.

Book chapter↗
USGS1996

Nymphal survival and habitat distribution of Ixodes scapularis and Amblyomma americanum ticks (Acari:Ixodidae) on Fire Island, New York

The distribution and survival of Ixodes scapularis and Amblyomma americanum were studied in deciduous and coniferous wooded habitats and in open habitats on Fire Island, New York, USA. The survival of nymphal I. scapularis in field enclosures was greater in forests than in open habitats, suggesting that greater survival contributes to the higher tick population in the woods. The nymphs of each species were more common in deciduous thickets (predominantly Aronia arbutifolia and Vaccinium corynbosum) than in coniferous woods (mostly Pinus rigida) in most but not all years. Larval I. scapularis were more common in coniferous sites in 1994, while the same ticks, as nymphs, were more common in deciduous sites in 1995. The survival of the nymphs was not consistently greater in either the deciduous or coniferous woods. Therefore, factors other than nymphal survival (e.g. larval overwintering survival and tick movement on hosts) probably influenced the relative nymph abundance in different forest types. Overall, the survival of A. americanum was far higher than that of I. scapularis.

Experimental and Applied Acarology↗
USGS1986

Natural fire management in national parks

An evolving understanding of ecological processes, together with ambiguities in National Park Service policy, have led to multiple interpretations of the role of management in our large natural area National Parks. National Park Service management policies must be dynamic and responsive to changes in scientific knowledge and societal values. We propose that the principal aim of NPS resource management in natural areas is the unimpeded interaction of native ecosystem processes and structural elements. The case of the changing role of natural fire management is used as an example in developing this rationale.

Environmental Management↗
USGS2007

Habitat alteration increases invasive fire ant abundance to the detriment of amphibians and reptiles

Altered habitats have been suggested to facilitate red imported fire ant (Solenopsis invicta) colonization and dispersal, possibly compounding effects of habitat alteration on native wildlife. In this study, we compared colonization intensity of wood cover boards by S. invicta among four forest management treatments in South Carolina, USA: an unharvested control (>30 years old); a partially thinned stand; a clearcut with coarse woody debris retained; and a clearcut with coarse woody debris removed. Additionally, we compared dehydration rates and survival of recently metamorphosed salamanders (marbled salamanders, Ambystoma opacum, and mole salamanders, A. talpoideum) among treatments. We found that the number of wood cover boards colonized by S. invicta differed significantly among treatments, being lowest in the unharvested forest treatments and increasing with the degree of habitat alteration. Salamanders that were maintained in experimental field enclosures to study water loss were unexpectedly subjected to high levels of S. invicta predation that differed among forest treatments. All known predation by S. invicta was restricted to salamanders in clearcuts. The amount of vegetative ground cover was inversely related to the likelihood of S. invicta predation of salamanders. Our results show that S. invicta abundance increases with habitat disturbance and that this increased abundance has negative consequences for amphibians that remain in altered habitats. Our findings also suggest that the presence of invasive S. invicta may compromise the utility of cover boards and other techniques commonly used in herpetological studies in the Southeast. ?? 2007 Springer Science+Business Media B.V.

Biological Invasions↗
USGS2021

Patterns of post-fire invasion of semiarid shrub-steppe reveals a diversity of invasion niches within an exotic annual grass community

Disturbances such as fire provide an opportunity for invasive plant species to exploit newly created niche space. Whether initial invaders facilitate, compete with, or do not affect later invaders is important to determine in communities affected by multiple invaders. This analysis focuses on the newer invaders Taeniatherum caput-medusae (medusahead) and Ventenata dubia (ventenata) in sagebrush-steppe communities previously invaded by Bromus tectorum (cheatgrass), during the first 5 years of recovery after wildfire . We combined probabilistic co-occurrence analysis and Getis-Ord spatial clustering analysis to assess relationships between different exotic annual grass species and native and introduced perennial bunchgrasses, then used Bayesian generalized linear models to determine if and how medusahead and ventenata differed in their environmental relationships and thus invasion niches. Medusahead presence was positively associated with both other exotic annual grasses, but ventenata presence was negatively associated with cheatgrass presence. Medusahead hotspots were more spatially similar to cheatgrass hotspots while ventenata hotspots were unique. Both invaders were negatively related to total perennial bunchgrass cover but disassociations between invaders and different perennial bunchgrasses were species-specific. Medusahead and ventenata occupied different niches; medusahead in low elevation, low precipitation areas and ventenata in higher elevation, higher precipitation areas. Despite seemingly similar ecology and growth requirements among these annual grasses and a tendency to be considered uniformly in both research and management, the species appeared to have different invasion niches.

Idaho, Oregon↗
USGS2024

Leveraging extensive soil, vegetation, fire, and land treatment data to inform restoration across the sagebrush biome

Context Widespread ecological degradation has prompted calls for massive global investments in ecological restoration, yet limited resources necessitate efficient application of restoration efforts. In western North America, altered fire regimes are increasing the scale of restoration needed to preserve the sagebrush ( Artemisia species) biome but prioritizing and implementing effective restoration is complicated by the vast and heterogeneous sagebrush landscape, which includes gradients in climate, disturbance, and species composition. Objectives To develop spatially explicit and context-dependent estimates of treatment efficacy and sagebrush recovery rates. Methods We leveraged a suite of spatio-temporally extensive datasets to evaluate the influence of restoration treatments and environmental conditions on trends in post-disturbance sagebrush cover, with an emphasis on understanding differences between sites recovering naturally and sites receiving restoration treatments. We used estimates from these models to develop spatially explicit projections for sagebrush recovery, conditional on disturbance, restoration practice, and environmental conditions. Results We found seeding Artemisia spp. increased sagebrush cover over time relative to natural recovery, but this relationship depended on spring soil moisture availability and treatment methods. Natural recovery was positively influenced by soil moisture and sagebrush cover and negatively influenced by cumulative burns and annual herbaceous cover, while the influence of perennial herbaceous cover varied with soil moisture. Conclusions Our results provide biome-wide insights and spatially explicit tools that can inform economic cost-effectiveness analyses, restoration prioritization tools, and other scientific endeavors to ensure managers have the tools and information needed to effectively steward the sagebrush biome in a rapidly changing world.

Landscape Ecology↗
USGS1968

Determination of palladium, platinum and rhodium in geologic materials by fire assay and emission spectrography

A method is described for the determination of palladium down to 4ppb (parts per billion, 10 9 ), platinum down to 10 ppb and rhodium down to 5 ppb in 15 g of sample. Fire-assay techniques are used to preconcentrate the platinum metals into a gold bead, then the bead is dissolved in aqua regia and diluted to volume with 1 M hydrochloric acid. The solution is analysed by optical emission spectrography of the residue from 200 μl of it evaporated on a pair of flat-top graphite electrodes. This method requires much less sample handling than most published methods for these elements. Data are presented for G-1, W-1, and six new standard rocks of the U.S. Geological Survey. The values for palladium in W-1 are in reasonable agreement with previously published data.

Talanta↗
USGS2018

Cadmium isotope fractionation during coal combustion: Insights from two U.S. coal-fired power plants

Coal combustion, one of the principal energy sources of electricity in the United States, produces over 100 million tons of coal combustion products (CCPs) per year in the U.S. The reuse and disposal of CCPs has the potential to release toxic trace elements, including cadmium (Cd), into the environment. In this study, we investigated CCPs, including bottom ash (BA), economizer fly ash (EFA), and fly ash (FA), as well as feed coal (FC) and pulverized coal (PC) collected from two U.S. coal-fired power plants in New Mexico and Ohio with different coal supplies. The New Mexico plant uses high volatile C bituminous, low-sulfur coals mined from the San Juan Basin (Cretaceous Fruitland Formation) and the Ohio plant uses high volatile A bituminous, high-sulfur central Appalachian Basin coals (Upper Pennsylvanian Monongahela Formation). Mineralogical and elemental analysis showed that these CCP samples consist of ∼70% amorphous Al-Si-rich glasses and ∼30% mineral phases of quartz (SiO 2 ) and mullite (Ai 6 Si 2 O 13 ). The Cd isotope compositions (δ 114 Cd, normalized to NIST Cd standard 3108) of FA and EFA samples (ranging from −0.51 to +0.47‰) are distinctively heavier than those of BA samples (−0.75 to −0.52‰) in both power plants. We interpret this Cd isotope difference as a result of Cd condensation from the gas phase during flue gas cooling, instead of evaporation of Cd phase during coal combustion. Cd condensation is the main process to generate the isotopically heavy Cd signatures that preferentially partition on the fine FA particles. We also investigated Cd isotope compositions in different leachate products from a series of batch-leaching experiments with these CCPs, using diluted acetic acid, hydroxyl ammonium chloride, hydrogen peroxide followed by ammonium acetate, and 5% nitric acid, as a possible means to identify CCP-released Cd in the environment. Unusually and significantly heavier Cd isotope compositions were observed in each leachate of FA samples (+1.10 to +7.09‰), which fall far outside from the range of Cd isotope ratios observed in natural soils and rocks, but less so for the EFA samples (−0.43 to +1.18‰). Such an observation is consistent with the interpretation that isotopically heavy Cd preferentially partitions on the fine FA particles after coal combustion and is readily to be released during these leaching experiments. This study demonstrates that high-temperature coal combustion can lead to a very large degree of fractionation of Cd isotopes that can be used as a unique tracer for identifying anthropogenic metal inputs in the environment. The major Cd isotope fractionation process occurs as the Cd gas phase condenses on fine FA particles during the flue gas cooling stage after coal combustion.

New Mexico, Ohio↗
USGS2007

Butterfly responses to prairie restoration through fire and grazing

The development of land for modern agriculture has resulted in losses of native prairie habitat. The small, isolated patches of prairie habitat that remain are threatened by fire suppression, overgrazing, and invasion by non-native species. We evaluated the effects of three restoration practices (grazing only, burning only, and burning and grazing) on the vegetation characteristics and butterfly communities of remnant prairies. Total butterfly abundance was highest on prairies that were managed with burning and grazing and lowest on those that were only burned. Butterfly species richness did not differ among any of the restoration practices. Butterfly species diversity was highest on sites that were only burned. Responses of individual butterfly species to restoration practices were highly variable. In the best predictive regression model, total butterfly abundance was negatively associated with the percent cover of bare ground and positively associated with the percent cover of forbs. Canonical correspondence analysis revealed that sites with burned only and grazed only practices could be separated based on their butterfly community composition. Butterfly communities in each of the three restoration practices are equally species rich but different practices yield compositionally different butterfly communities. Because of this variation in butterfly species responses to different restoration practices, there is no single practice that will benefit all species or even all species within habitat-specialist or habitat-generalist habitat guilds. ?? 2007 Elsevier Ltd. All rights reserved.

Biological Conservation↗
USGS2005

Arsenic-bearing pyrite and marcasite in the Fire Clay coal bed, Middle Pennsylvanian Breathitt Formation, eastern Kentucky

Arsenic concentrations determined on 11 lithotype samples from the Middle Pennsylvanian Breathitt Group Fire Clay coal bed, Leslie County, KY, range from 1 to 418 ppm (whole coal basis). The 11 lithotype samples, which vary in thickness from 4 to 18 cm, were sampled from a continuous 1.38 m channel sample, and were selected based on megascopic appearance (vitrain-rich versus attrital-rich). A lithotype that contains 418 ppm As is located near the top of the coal bed and is composed of 10.5 cm of bright clarain bands containing fusain that, within short distances, grade laterally into Fe sulfide bands. To determine the mode of occurrence of As in this lithotype, the coal was examined with scanning electron microscopy and analyzed by energy dispersive X-ray fluorescence. Massive, framboidal, cell filling, cell-wall replacement, and radiating forms of Fe sulfide were observed in the high As lithotype; many of the radiating Fe sulfide forms, and one of the cell-wall replacements contained As. Examination of the grains with optical light microscopy shows that the majority of radiating morphologies are pyrite, the remainder are marcasite. Selected Fe sulfide grains were also analyzed by electron microprobe microscopy. Arsenic concentrations within individual grains range from 0.0 wt.% to approximately 3.5 wt.%. On the basis of morphology, these Fe sulfides are presumed to be of syngenetic origin and would probably be removed from the coal during physical coal cleaning, thus eliminating a potential source of As from the coal combustion process. However, because the grains are radiating and have high surface area, dissolution and release of As could occur if the pyrite is oxidized in refuse ponds.

International Journal of Coal Geology↗
USGS2012

Leaching of elements from bottom ash, economizer fly ash, and fly ash from two coal-fired power plants

To assess how elements leach from several types of coal combustion products (CCPs) and to better understand possible risks from CCP use or disposal, coal ashes were sampled from two bituminous-coal-fired power plants. One plant located in Ohio burns high-sulfur (about 3.9%) Upper Pennsylvanian Pittsburgh coal from the Monongahela Group of the Central Appalachian Basin; the other in New Mexico burns low-sulfur (about 0.76%) Upper Cretaceous Fruitland Formation coal from the San Juan Basin, Colorado Plateau. The sampled CCPs from the Ohio plant were bottom ash (BA), economizer fly ash (EFA), and fly ash (FA); the sampled CCPs from the New Mexico plant were BA, mixed FA/EFA, FA, and cyclone-separated coarse and fine fractions of a FA/EFA and FA blend. Subsamples of each ash were leached using the long-term leaching (60-day duration) component of the synthetic groundwater leaching procedure (SGLP) or the toxicity characteristic leaching procedure (TCLP, 18-hour duration). These ashes were all alkaline. Leachate concentrations and leachabilities of the elements from the CCPs were similar between corresponding CCP types (BA, EFA, and FA) from each plant. The leachabilities of most elements were lowest in BA (least leachable) and increased from EFA to FA (most leachable). Ca and Sr were leached more from EFA than from either BA or FA. Leachability of most elements also increased as FA particle size decreased, possibly due in part to increasing specific surface areas. Several oxyanion-forming elements (As, Mo, Se, U, and V) leached more under SGLP than under TCLP; the opposite was true for most other elements analyzed.

International Journal of Coal Geology↗
USGS2019

Morphodynamic modelling of the wilderness breach, Fire Island, New York. Part I: Model set-up and validation

On October 29, 2012, storm surge and large waves produced by Hurricane 13 Sandy resulted in the formation of a breach in eastern Fire Island, NY. The goals of this study 14 are to gain a better understanding of the physical processes that govern breach behavior and 15 to assess whether process-based models can be used to forecast the evolution of future 16 breaches. The Wilderness Breach grew rapidly in size during the first winter following 17 formation. Growth of the breach was accompanied by the formation of a complex of flood 18 shoals inside Great South Bay, a primary channel that flowed through the eastern part of the 19 flood shoals, and an ebb shoal on the ocean side of the breach. From the summer of 2013 20 through late 2015, the breach continued to change and evolve, albeit at a much slower pace 21 than in the first year after formation. A hybrid combination of Delft3D and XBeach models is 22 used to hindcast the morphodynamic evolution of the Wilderness Breach over the first three 23 years after formation. The formation of the breach during Hurricane Sandy is not part of the 24 simulations. Model simulations are initiated with a post-storm topography in which the 25 breach is already present. The models are capable of hindcasting the main morphodynamic 26 changes of the Wilderness Breach. The spatial patterns, as well as the bulk statistics, such as 27 2 breach geometry and sediment volume changes, are reasonably 28 well reproduced by the model. 29 The model sheds light on previously unknown processes of breach evolution, especially 30 regarding sediment transport and flow regimes within the breach complex.

New York↗
USGS2019

Alongshore momentum balance over shoreface-connected ridges, Fire Island, NY

Hydrodynamic and hydrographic data collected on the inner shelf of Fire Island, NY, over a region of shoreface-connected ridges (SFCRs) are used to describe wind-driven circulation over uneven topographies along relatively straight coastlines. The data revealed a predominantly alongshore flow, under westward wind forcing, with localized offshore current veering over the SFCR crests associated with an onshore veering over the adjacent troughs. Momentum balance analysis of the observations revealed that local acceleration, advective acceleration, and bottom stress are balanced by wind stress and regional (>100 km) pressure gradient force. Numerical model results based on simulations of an idealized SFCR bathymetry, as in Warner et al. (2014) but forced with the observed winds, are used to verify the experimentally derived results and constraint inaccuracies in the momentum balance term relationships revealed using the field data. As with previous SFCR studies, our experimental results indicate a current veering over ridge crests. Veering is driven primarily by two processes: cross-shore variation of alongshore advective acceleration which creates cross-shore pressure gradient and drives flow (described as a Bernoulli-like process), and, bottom frictional-torque. A synthesis of the numerical and experimental data revealed that the total pressure gradient force can be considered as the sum of a local and a regional pressure gradient force. The former is correlated with the alongshore advective acceleration that develops over the crest of the ridges resembling a Bernoulli-like pressure-flow relationship. The regional pressure gradient force is related to wind stress with which maintains a strong, negative relationship. The realistic driving force analysis revealed the different contributions of the local and regional scale pressure gradients. Under realistic and variable wind conditions the regional pressure gradients are more important and the influence of the local scale pressure gradient increases as the flow reaches quasi steady-state conditions. A time scale of 6 hours was defined as the temporal scale required for the local pressure gradients to have an effect

New York↗
USGS2011

A data-driven approach for modeling post-fire debris-flow volumes and their uncertainty

This study demonstrates the novel application of genetic programming to evolve nonlinear post-fire debris-flow volume equations from variables associated with a data-driven conceptual model of the western United States. The search space is constrained using a multi-component objective function that simultaneously minimizes root-mean squared and unit errors for the evolution of fittest equations. An optimization technique is then used to estimate the limits of nonlinear prediction uncertainty associated with the debris-flow equations. In contrast to a published multiple linear regression three-variable equation, linking basin area with slopes greater or equal to 30 percent, burn severity characterized as area burned moderate plus high, and total storm rainfall, the data-driven approach discovers many nonlinear and several dimensionally consistent equations that are unbiased and have less prediction uncertainty. Of the nonlinear equations, the best performance (lowest prediction uncertainty) is achieved when using three variables: average basin slope, total burned area, and total storm rainfall. Further reduction in uncertainty is possible for the nonlinear equations when dimensional consistency is not a priority and by subsequently applying a gradient solver to the fittest solutions. The data-driven modeling approach can be applied to nonlinear multivariate problems in all fields of study.

Environmental Modelling and Software↗
USGS2009

Thermal characteristics of amphibian microhabitats in a fire-disturbed landscape

Disturbance has long been a central issue in amphibian conservation, often regarding negative effects of logging or other forest management activities, but some amphibians seem to prefer disturbed habitats. After documenting increased use of recently burned forests by boreal toads (Bufo boreas), we hypothesized that burned habitats provided improved thermal opportunities in terrestrial habitats. We tested this hypothesis by conducting a radio telemetry study of habitat use (reported previously) and by using physical models that simulated the temperature of adult toads. We deployed 108 physical models in and adjacent to a 1-year old burn using a fully-replicated design with three burn severities (unburned, partial, high severity) and four microhabitats (open surface, under vegetation, under log, in burrow). Model temperatures were compared to a range of preferred temperatures in published studies. We found 70% more observations within the preferred temperature range of B. boreas in forests burned with high severity than in unburned areas. Burned forest was warmer than unburned forest across all microhabitats, but the largest relative difference was in burrows, which averaged 3 ??C warmer in high-severity burn areas and remained warmer though the night. More than twice as many observations were within the preferred temperature range in high-severity burrows than in unburned burrows. Areas burned with high severity were still warmer than unburned forest 3 years after the fire. Habitat use of toads during the concurrent radio telemetry study matched that predicted by the physical models. These results suggest there are fitness-linked benefits to toads using burned habitats, such as increased growth, fertility, and possibly disease resistance. However, increased soil temperatures that result from wildfire may be detrimental to other amphibian species that prefer cooler temperatures and stable environments. More broadly, our data illustrate the use of physical models to measure and interpret changes that amphibians may experience from disturbance, and highlight the need for research linking vital rates such as growth and survival to disturbance.

Forest Ecology and Management↗