USGS Science⌕ Search

SEARCH · USGS Science

Results for “Oregon Geology”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 901 records · Page 50Linked to original sources

Central Basin and Range Ecoregion: Chapter 20 in Status and trends of land change in the Western United States--1973 to 2000

This chapter has been modified from original material published in Soulard (2006), entitled “Land-cover trends of the Central Basin and Range Ecoregion” (U.S. Geological Survey Scientific Investigations Report 2006–5288). The Central Basin and Range Ecoregion (Omernik, 1987; U.S. Environmental Protection Agency, 1997) encompasses approximately 343,169 km² (132,498 mi2) of land bordered on the west by the Sierra Nevada Ecoregion, on the east by the Wasatch and Uinta Mountains Ecoregion, on the north by the Northern Basin and Range and the Snake River Basin Ecoregions, and on the south by the Mojave Basin and Range and the Colorado Plateaus Ecoregions (fig. 1). Most of the Central Basin and Range Ecoregion is located in Nevada (65.4 percent) and Utah (25.1 percent), but small segments are also located in Idaho (5.6 percent), California (3.7 percent), and Oregon (0.2 percent). Basin-and-range topography characterizes the Central Basin and Range Ecoregion: wide desert valleys are bordered by parallel mountain ranges generally oriented northsouth. There are more than 33 peaks within the Central Basin and Range Ecoregion that have summits higher than 3,000 m (10,000 ft), but valleys in the ecoregion are also high, most having elevations above 1,200 m (4,000 ft) (Grayson, 1993).

California;Idaho;Nevada;Oregon;Utah↗

Range-wide phylogeographic analysis of the spotted frog complex (Rana luteiventris and Rana pretiosa) in northwestern North America

The dynamic geological and climatic history of northwestern North America has made it a focal region for phylogeography. We conducted a range-wide phylogeographic analysis of the spotted frog complex (Rana luteiventris and Rana pretiosa) across its range in northwestern North America to understand its evolutionary history and the distribution of clades to inform conservation of R. pretiosa and Great Basin R. luteiventris, candidates for listing under the US Endangered Species Act. Mitochondrial DNA sequence data from a segment of the cytochrome b gene were obtained from 308 R. luteiventris and R. pretiosa from 96 sites. Phylogenetic analysis revealed one main R. pretiosa clade and three main R. luteiventris clades, two of which overlapped in southeastern Oregon. The three R. luteiventris clades were separated from each other by high levels of sequence divergence (average of 4.75-4.97%). Two divergent clades were also uncovered within the Great Basin. Low genetic variation in R. pretiosa and the southeastern Oregon clade of R. luteiventris suggests concern about their vulnerability to extinction. ?? 2008 Elsevier Inc.

Molecular Phylogenetics and Evolution↗

A New Perspective on Mount St. Helens - Dramatic Landform Change and Associated Hazards at the Most Active Volcano in the Cascade Range

Mount St. Helens has erupted more frequently than any other volcano in the Cascade Range during the past 4,000 years. The volcano has exhibited a variety of eruption styles?explosive eruptions of pumice and ash, slow but continuous extrusions of viscous lava, and eruptions of fluid lava. Evidence of the volcano?s older eruptions is recorded in the rocks that build and the deposits that flank the mountain. Eruptions at Mount St. Helens over the past three decades serve as reminders of the powerful geologic forces that are reshaping the landscape of the Pacific Northwest. On May 18, 1980, a massive landslide and catastrophic explosive eruption tore away 2.7 cubic kilometers of the mountain and opened a gaping, north-facing crater. Lahars flowed more than 120 kilometers downstream, destroying bridges, roads, and buildings. Ash from the eruption fell as far away as western South Dakota. Reconstruction of the volcano began almost immediately. Between 1980 and 1986, 80 million cubic meters of viscous lava extruded episodically onto the crater floor, sometimes accompanied by minor explosions and small lahars. A lava dome grew to a height of 267 meters, taller than the highest buildings in the nearby city of Portland, Oregon. Crater Glacier formed in the deeply shaded niche between the 1980-86 lava dome and the south crater wall. Its tongues of ice flowed around the east and west sides of the dome. Between 1989 and 1991, multiple explosions of steam and ash rocked the volcano, possibly a result of infiltrating rainfall being heated in the still-hot interior of the dome and underlying crater floor. In September 2004, rising magma caused earthquake swarms and deformation of the crater floor and glacier, which indicated that Mount St. Helens might erupt again soon. On October 1, 2004, a steam and ash explosion signaled the beginning of a new phase of eruptive activity at the volcano. On October 11, hot rock reached the surface and began building a new lava dome immediately south of the 1980-86 lava dome. The erupting lava cleaved Crater Glacier in half and bulldozed it aside, causing thickening, crevassing, and rapid northward advance of the glacier?s east and west arms. Intermittent steam and ash explosions, some generating plumes that rose up to 11 kilometers, preceded and accompanied extrusion of the new lava dome, but ceased by early 2005. As the new dome grew, a series of large fins or spines of hot lava rose, some more than 100 meters high, and then crumbled producing sometimes spectacular rock falls. The largest of these rock falls generated dust or steam plumes that rose high above the crater rim. By February 2006, the new dome had grown to a volume similar to that of the 1980-86 lava dome; and by July 2007, the new dome had grown to a volume of 93 million cubic meters, exceeding the volume of the 1980-86 lava dome. The height of the new dome also exceeded that of the 1980-86 lava dome, and at its highest point (before collapse in 2005) reached to within 2 meters of the lowest point on the south crater rim. At this height, the new dome was taller than the Empire State Building in New York City. The new lava dome initially grew very quickly, at rates of 2 to 3 cubic meters (one small dump truck load) per second. If it had continued to grow at these rates for about 100 years, it would have replaced the volume of rock removed from the volcano during the May 18, 1980, eruption. However, the lava extrusion rate slowed throughout the eruption, and, by July 2007, it was oozing at a rate of 0.1 cubic meters per second. At that rate, it would take over 700 years to replace the volume of rock lost in 1980. Lava dome extrusion has continued into early 2008.

Scientific Investigations Map↗

Geomorphic and vegetation processes of the Willamette River floodplain, Oregon: current understanding and unanswered science questions

This report summarizes the current understanding of floodplain processes and landforms for the Willamette River and its major tributaries. The area of focus encompasses the main stem Willamette River above Newberg and the portions of the Coast Fork Willamette, Middle Fork Willamette, McKenzie, and North, South and main stem Santiam Rivers downstream of U.S. Army Corps of Engineers dams. These reaches constitute a large portion of the alluvial, salmon-bearing rivers in the Willamette Basin. The geomorphic, or historical, floodplain of these rivers has two zones - the active channel where coarse sediment is mobilized and transported during annual flooding and overbank areas where fine sediment is deposited during higher magnitude floods. Historically, characteristics of the rivers and geomorphic floodplain (including longitudinal patterns in channel complexity and the abundance of side channels, islands and gravel bars) were controlled by the interactions between floods and the transport of coarse sediment and large wood. Local channel responses to these interactions were then shaped by geologic features like bedrock outcrops and variations in channel slope. Over the last 150 years, floods and the transport of coarse sediment and large wood have been substantially reduced in the basin. With dam regulation, nearly all peak flows are now confined to the main channels. Large floods (greater than 10-year recurrence interval prior to basinwide flow regulation) have been largely eliminated. Also, the magnitude and frequency of small floods (events that formerly recurred every 2–10 years) have decreased substantially. The large dams trap an estimated 50–60 percent of bed-material sediment—the building block of active channel habitats—that historically entered the Willamette River. They also trap more than 80 percent of the estimated bed material in the lower South Santiam River and Middle and Coast Forks of the Willamette River. Downstream, revetments further decrease bed-material supply by an unknown amount because they limit bank erosion and entrainment of stored sediment. The rivers, geomorphic floodplain, and vegetation within the study area have changed noticeably in response to the alterations in floods and coarse sediment and wood transport. Widespread decreases have occurred in the rates of meander migration and avulsions and the number and diversity of landforms such as gravel bars, islands, and side channels. Dynamic and, in some cases, multi-thread river segments have become stable, single-thread channels. Preliminary observations suggest that forest area has increased within the active channel, further reducing the area of unvegetated gravel bars. Alterations to floods and sediment transport and ongoing channel, floodplain, and vegetation responses result in a modern Willamette River Basin. Here, the floodplain influenced by the modern flow and sediment regimes, or the functional floodplain, is narrower and inset with the broader and older geomorphic floodplain. The functional floodplain is flanked by higher elevation relict floodplain features that are no longer inundated by modern floods. The corridor of present- day active channel surfaces is narrower, enabling riparian vegetation to establish on formerly active gravel bar surfaces. The modern Willamette River Basin with its fundamental changes in the flood, sediment transport, and large wood regimes has implications for future habitat conditions. System-wide future trends probably include narrower floodplains and a lower diversity of landforms and habitats along the Willamette River and its major tributaries compared to historical patterns and today. Furthermore, specific conditions and future trends will probably vary between geologically stable, anthropogenically stable, and dynamic reaches. The middle and lower segments of the Willamette River are geologically stable, whereas the South Santiam and Middle Fork Willamette Rivers were historically dynamic, but are now largely stable in response to flow regulation and revetment construction. The upper Willamette and North Santiam Rivers retain some dynamic characteristics, and provide the greatest diversity of aquatic and riparian habitats under the current flow and sediment regime. The McKenzie River has some areas that are more dynamic, whereas other sections are stable due to geology or revetments. Historical reductions in channel dynamism also have implications for ongoing and future recruitment and succession of floodplain forests. For instance, the succession of native plants like black cottonwood is currently limited by (1) fewer low-elevation gravel bars for stand initiation; (2) altered streamflow during seed release, germination, and stand initiation; (3) competition from introduced plant species; and (4) frequent erosion of young vegetation in some locations because scouring flows are concentrated within a narrow channel corridor. Despite past alterations, the Willamette River Basin has many of the physical and ecological building blocks necessary for highly functioning rivers. Management strategies, including environmental flow programs, river and floodplain restoration, revetment modifications, and reclamation of gravel mines, are underway to mitigate some historical changes. However, there are some substantial gaps in the scientific understanding of the modern Willamette basin that is needed to efficiently integrate these blocks and to establish realistic objectives for future conditions. Unanswered questions include: 1. What is the distribution and diversity of landforms and habitats along the Willamette River and its tributaries? 2. What is the extent of today’s functional floodplain—the part of the river corridor actively formed and modified by fluvial processes? 3. How are landforms and habitats in the Willamette River Basin created and sustained by present-day flow and sediment conditions? 4. How is the succession of native floodplain vegetation shaped by present-day flow and sediment conditions? Answering these questions will produce baseline data on the current distributions of landforms and habitats (question 1), the extent of the functional floodplain (question 2), and the effects of modern flow and sediment regimes on future floodplain landforms, habitats, and vegetation succession (questions 3 and 4). Addressing questions 1 and 2 is a logical next step because they underlie questions 3 and 4. Addressing these four questions would better characterize the modern Willamette Basin and help in implementing and setting realistic targets for ongoing management strategies, demonstrating their effectiveness at the site and basin scales, and anticipating future trends and conditions.

Oregon↗

Post 12 m.y. rotation of southwest Washington

Paleomagnetic field directions from the basalt of Pack Sack Lookout are compared to those from the Pomona Member of the Saddle Mountains Basalt of the Columbia River Basalt Group. The Pomona crops out over a wide region on the Columbia Plateau east of the Cascade Range, and the basalt of Pack Sack Lookout crops out well to the west of the Cascades about 30 to 60 km east of the Washington coast. Our paleomagnetic results support existing geologic and geochemical evidence that both these units are part of a single 12‐m.y.‐old flow that erupted in western Idaho and flowed to the Washington coast. The magnetic data further indicate that southwest Washington has undergone clockwise rotation with respect to the Columbia Plateau and stable North America. The data suggest that both a large‐scale regional rotation of ∼16° and locally complex small‐scale rotations exist, the two being present to different degrees in the eastern and western regions of southwest Washington. The Cascade Range appears to coincide with the tectonic boundary, separating rotated and unrotated regions of Washington state. Rotation of southwest Washington appears to have been associated with the rotation of large pieces of western Oregon and southern Washington, possibly as a result of either a ridge‐push force from the Basin and Range province or shear along the Pacific‐North America plate boundary.

Washington↗

Nickeliferous laterites in southwestern Oregon and northwestern California

Deposits of ferruginous nickeliferous lateritic soils formed by weathering in place of ultramafic rocks occur at several places in northwestern California and southwestern Oregon, mostly in the Klamath Mountains province. Most of the deposits have been derived from relatively fresh peridotite, although at least one deposit was formed on serpentinite. The accumulations of lateritic soil are on flat-lying to gently sloping surfaces in a terrain that has been extensively dissected and deeply entrenched.The thickness of the deposits ranges from a few feet to more than 50 feet, and may vary widely in any given deposit, for the bedrock surface is commonly highly irregular. The deposit at Nickel Mountain, Oregon, is unique, because it is the only one in which the nickel silicate, garnierite, is plentiful. At Nickel Mountain, garnierite, accompanied by abundant microcrystalline quartz, occurs in veinlike bodies and boxworks that lie at the base of the soil zone and persist in depth along joints and fractures into the underlying slightly weathered or fresh peridotite.Mineralogical studies and chemical analyses show that weathering of the ultramafic rocks destroyed olivine and much of the orthopyroxene and serpentine minerals. Secondary minerals formed are predominantly hydrated ferric oxides (goethite); minor amounts of a montmorillonite mineral, chlorite, and talc were also identified. The kaolin group and bauxite minerals were not found. Except for garnierite at the Nickel Mountain deposit, no nickel-bearing mineral was identified. Nickel may occur, however, in montmorillonite, chlorite, and talc where it substitutes for Mg to a limited extent; in serpentine minerals that were not destroyed by weathering; and possibly in combination with ferric hydroxides. Cobalt may also occur in the clay minerals and probably is associated with trace amounts of manganese oxide or hydroxides.The lateritic soils in northwestern California and southwestern Oregon are similar to soils formed by lateritic weathering of ultramafic rocks in Cuba, the Philippines, New Caledonia, and other tropical regions of the world. They have, however, a higher content of SiO 2 and MgO, and a lower content of Fe 2 O 3 than deposits formed in tropical climates. The California and Oregon deposits are considerably smaller and lower in average metal content which, because they are widely scattered in a rugged, relatively isolated terrain, makes them unpromising as likely reserves for commercial exploitation in the foreseeable future.Most of the deposits are regarded as having been formed by chemical weathering in a climate having alternating wet and dry seasons, probably similar to that prevailing today. Their age is uncertain but may range from post-Miocene to Pleistocene.

California, Oregon↗

Geologic map of the Weaverville 15' quadrangle, Trinity County, California

The Weaverville 15' quadrangle spans parts of five generally north-northwest-trending accreted terranes. From east to west, these are the Eastern Klamath, Central Metamorphic, North Fork, Eastern Hayfork, and Western Hayfork terranes. The Eastern Klamath terrane was thrust westward over the Central Metamorphic terrane during early Paleozoic (Devonian?) time and, in Early Cretaceous time (approx. 136 Ma), was intruded along its length by the massive Shasta Bally batholith. Remnants of overlap assemblages of the Early Cretaceous (Hauterivian) Great Valley sequence and the Tertiary Weaverville Formation cover nearly 10 percent of the quadrangle. The base of the Eastern Klamath terrane in the Weaverville quadrangle is a peridotite-gabbro complex that probably is correlative to the Trinity ophiolite (Ordovician), which is widely exposed farther north beyond the quadrangle. In the northeast part of the Weaverville quadrangle, the peridotite-gabbro complex is overlain by the Devonian Copley Greenstone and the Mississippian Bragdon Formation. Where these formations were intruded by the Shasta Bally batholith, they formed an aureole of gneissic and other metamorphic rocks around the batholith. Westward thrusting of the Eastern Klamath terrane over an adjacent body of mafic volcanic and overlying quartzose sedimentary rocks during Devonian time formed the Salmon Hornblende Schist and the Abrams Mica Schist of the Central Metamorphic terrane. Substantial beds of limestone in the quartzose sedimentary unit, generally found near the underlying volcanic rock, are too metamorphosed for fossils to have survived. Rb-Sr analysis of the Abrams Mica Schist indicates a metamorphic age of approx. 380 Ma. West of Weavervillle, the Oregon Mountain outlier of the Eastern Klamath terrane consists mainly of Bragdon Formation(?) and is largely separated from the underlying Central Metamorphic terrane by serpentinized peridotite that may be a remnant of the Trinity ophiolite. The North Fork terrane is faulted against the west edge of the Central Metamorphic terrane, and its northerly trend is disrupted by major left-lateral offsets along generally west-northwest-trending faults. The serpentinized peridotite-gabbro complex that forms the western base of the terrane is the Permian North Fork ophiolite, which to the east is overlain by broken formation of mafic-volcanic rocks, red chert, siliceous tuff, argillite, minor limestone, and clastic sedimentary rocks. The chert and siliceous tuff contain radiolarians of Permian and Mesozoic ages, and some are as young as Early Jurassic (Pliensbachian). Similar Pliensbachian radiolarians are found in Franciscan rocks of the Coast Ranges. The Eastern Hayfork terrane is broken formation and melange of mainly chert, sandstone, argillite, and various exotic blocks. The cherts yield radiolarians of Permian and Triassic ages but none of clearly Jurassic age. Limestone bodies of the Eastern Hayfork terrane contain Permian microfaunas of Tethyan affinity. The Western Hayfork terrane, exposed only in a small area in the southwestern part of the quadrangle, consists dominantly of mafic tuff and dark slaty argillite. Sparse paleontologic data indicate a Mesozoic age for the strata. The terrane includes small bodies of diorite that are related to the nearby Wildwood pluton of Middle Jurassic age and probably are related genetically to the stratified rocks. The terrane is interpreted to be the accreted remnants of a Middle Jurassic volcanic arc. Shortly after intrusion by Shasta Bally batholith (approx. 136 Ma), much of the southern half of the Weaverville quadrangle was overlapped by Lower Cretaceous, dominantly Hauterivian, marine strata of the Great Valley sequence, and to a lesser extent later during Oligocene and (or) Miocene time by fluvial and lacustrine deposits of the Weaverville Formation. This map of the Weaverville Quadrangle is a digital rendition of U.S. Geological Survey Miscellaneous Field

California↗

Satellite-tagged osprey nearly sets longevity record and productivity response to initial captures

We equipped adult Ospreys ( Pandion haliaetus ) from 24 nests in Oregon/Washington with satellite-tracked battery-powered radios, known as platform transmitter terminals (PTTs), in 1996–1999. These Ospreys from the lower Columbia River (river miles 76–286), and the Willamette Valley in western Oregon were part of a larger study of Osprey fall migration, wintering ecology, and spring migration, which included additional adults from the Upper Midwest and East Coast of the United States ( Martell et al. 2001 , 2014 , Washburn et al. 2014 ). These early-generation PTTs weighed 30–35 g (Microwave Telemetry Inc., Columbia, MD U.S.A.) and utilized the ARGOS tracking system ( www.argos-system.org ). We placed PTTs on the birds' backs using Teflon ribbon (Bally Ribbon, Bally, PA U.S.A.) in a standard backpack configuration ( Kenward 2001 ). With the mass of adult male Ospreys 1400 to 1500 g ( Poole et al. 2002 ), the ratio of tag mass to body mass was 2.0 to 2.5%. Ospreys also received a standard size 8 bird band (U.S. Geological Survey) on one leg and a numbered color band on the other. For more details on trapping techniques, attachment procedures, the battery-powered units, turn-on, turn-off cycles, and tracking equipment, see Martell et al. (2001) .

Oregon, Washington↗

National Assessment of Shoreline Change Part 3: Historical Shoreline Change and Associated Coastal Land Loss Along Sandy Shorelines of the California Coast

Beach erosion is a chronic problem along many open-ocean shores of the United States. As coastal populations continue to grow and community infrastructures are threatened by erosion, there is increased demand for accurate information regarding past and present trends and rates of shoreline movement. There is also a need for a comprehensive analysis of shoreline movement that is consistent from one coastal region to another. To meet these national needs, the U.S. Geological Survey is conducting an analysis of historical shoreline changes along open-ocean sandy shores of the conterminous United States and parts of Hawaii and Alaska. One purpose of this work is to develop standard repeatable methods for mapping and analyzing shoreline movement so that periodic updates regarding coastal erosion and land loss can be made nationally that are systematic and internally consistent. In the case of this study, the shoreline being measured is the boundary between the ocean water surface and the sandy beach. This report on the California Coast represents the first of two reports on long-term sandy shoreline change for the western U.S., the second of which will include the coast of the Pacific NW, including Oregon and Washington. A report for the Gulf of Mexico shoreline was completed in 2004 and is available at: http://pubs.usgs.gov/of/2004/1043/. This report summarizes the methods of analysis, interprets the results, provides explanations regarding long-term and short-term trends and rates of change, and describes how different coastal communities are responding to coastal erosion. Shoreline change evaluations are based on comparing three historical shorelines digitized from maps, with a recent shoreline derived from lidar (Light Detection and Ranging) topographic surveys. The historical shorelines generally represent the following periods: 1800s, 1920s-1930s, and 1950s-1970s, whereas the lidar shoreline is from 1998-2002. Long-term rates of change are calculated using all four shorelines (1800s to lidar shoreline), whereas short-term rates of change are calculated for only the most recent period (1950s-1970s to lidar shoreline). The rates of change presented in this report represent past conditions and therefore are not intended for predicting future shoreline positions or rates of change. Due to the geomorphology of the California Coast (rocky coastline instead of beach) as well as to data gaps in some areas, this report presents beach erosion rates for 45% of California's 1100 km of coast. The average rate of long-term shoreline change for the State of California was 0.2?0.1 m/yr, an accretional trend. This is based on shoreline change rates averaged from 14,562 individual transects, of which 40% were eroding. Of the transects on which the shoreline was eroding, the long-term erosion rates were generally lowest in Southern California where coastal engineering projects have greatly altered the natural shoreline movement. On a regional scale, long-term accretion rates were either equal to (Central California) or greater than (Northern and Southern California) the long-term erosion rates, yielding the net accretional trend for the entire state. This accretional trend is most likely due to changes in the large volumes of sediment that are added to the system from large rivers and to the impact from coastal engineering and beach nourishment projects. The average rate of short-term shoreline change for the state was erosional. The net short-term rate as averaged along 16,142 transects was -0.2?0.4 m/yr. Of the transects used to measure short-term change, 66% had erosional trends. In addition erosion rates were higher in the short-term period, possibly related to the localized artificial nourishment that occurred over much of the 20th century but that has recently slowed or stopped (Flick, 1993; Wiegel, 1994). Short-term accretion rates were highest in Northern California where the overall magnitudes of shoreline change are systematically higher than in Central and Southern California. The most stable (low erosion and accretion rates) California beaches were most commonly found in Central California. Seawalls and/or riprap revetments have been constructed in all three sections of California, although many of these structures were built to protect houses and infrastructures from the erosion of coastal cliffs and bluffs rather than to protect against long-term beach erosion. California permits shoreline stabilization structures where homes, buildings or other community infrastructure are imminently threatened by erosion. A second California report that is following this publication will include analyses and reports on long-term coastal cliff erosion, as this hazard is of equal or greater concern to coastal communities in many areas along the California Coast.

Open-File Report↗

Developing hydro-meteorological thresholds for shallow landslide initiation and early warning

Consistent relations between shallow landslide initiation and associated rainfall characteristics remain difficult to identify, due largely to the complex hydrological and geological processes causing slopes to be predisposed to failure and those processes that subsequently trigger failures. Considering the importance of hillslope hydrology for rainfall-induced landsliding, we develop and test a method for identifying hybrid hydro-meteorological thresholds to assess landslide initiation potential. We outline a series of steps for using a landslide inventory in combination with triggering rainfall and antecedent wetness to identify empirical thresholds that can inform landslide early warning systems. The method is semi-automated but remains flexible enough to allow threshold developers to consider data inputs and various performance metrics with different priorities for balancing failed versus false alarms. We demonstrate the utility of our approach for two monitoring sites near Seattle, Washington and in Portland, Oregon, USA, to develop daily bilinear thresholds within a two-dimensional parameter space, which rely on accurate 24 h forecasts, measured recent rainfall and in situ soil saturation. Although there were no prior landslide thresholds for Portland, our new hybrid threshold for the Seattle area outperforms established rainfall-only thresholds for the same region. Introducing subsurface hydrologic monitoring into landslide initiation thresholds has the potential to greatly improve early warning capabilities and help reduce losses.

Oregon, Washington↗

Correlation of metal occurrence and terrane attributes in the northwestern conterminous United States

The regional distribution patterns for 20 critical metals derived by an areal-pattern recognition technique leads me to conclude that metals are regularly distributed preferentially in the accreted and cratonic terranes studied in and surrounding the state of Oregon in the northwestern United States. The distribution patterns along distinctively different zones differ in these contrasting crusts across a concealed boundary that is established by strontium isotope data. Copper and gold appear to be abundant in both terranes; nickel, cobalt, chromium, and the platinum-group metals predominate in accreted terranes; lead, zinc, tin, and tungsten are concentrated locally along the boundary zone along the edge and in the interior of the cratonic terrane. The association of metals with accreted terranes and with restricted areas or lineaments in the craton further supports the metallogenetic hypothesis that metal materials are derived mainly from underlying ensialic and ensimatic crusts, and anticipates the possibility for remobilization of these materials along the same broad linear zones over geologic time.

California, Idaho, Montana, Nevada, Oregon, Utah, ↗

Organic matters: Investigating the sources, transport, and fate of organic matter in Fanno Creek, Oregon

The term organic matter refers to the remnants of all living material. This can include fallen leaves, yard waste, animal waste, downed timber, or the remains of any other plant and animal life. Organic matter is abundant both on land and in water. Investigating organic matter is necessary for understanding the fate and transport of carbon (a major constituent of organic matter). Organic matter is necessary for maintaining a healthy ecosystem. It participates in a wide range of ecological functions, such as supplying food to the microbes that are part of the foundation of the food chain. Organic matter also plays a role in many other natural functions, including the binding and transport of some trace metals and controlling how light is absorbed in the water column. Organic matter in a stream can be found in many places, such as in the leaves that have fallen from a tree (termed "leaf litter"), in algae floating in the stream or attached to rocks, as part of the soil, or even suspended or dissolved in the water. The U.S. Geological Survey (USGS), in cooperation with Clean Water Services, recently completed an investigation into the sources, transport, and fate of organic matter in the Fanno Creek watershed. The information provided by this investigation will help resource managers to implement strategies aimed at decreasing the excess supply of organic matter that contributes to low dissolved-oxygen levels in Fanno Creek and downstream in the Tualatin River during summer. This fact sheet summarizes the findings of the investigation.

Oregon↗

Mapping, exploration, and characterization of the California continental margin and associated features from the California-Oregon border to Ensenada, Mexico

Priority Geographic Area: Both within and outside US Exclusive Economic Zone (EEZ). California continental margin. This area includes and continues south of the geographic area captured in the Watt et al. white paper. Description of Priority Area: The California continental margin, from the narrow shelf to abyssal depths, contains diverse seafloor features that influence benthic community types, biological connectivity, and is associated with significant seafloor geohazards. These complex features include marginal basins, depositional slopes, submarine canyons, ridges, and seamounts, and seep environments as a result of fluid seeps along active faults. Water column characteristics are variable, with steep gradients in current velocities, which influence sediment transport, from depositional fans (slow flow, muddy) to submarine canyons and seamounts (high currents, rocky, rugged terrain). These features and associated environments can influence the distribution of deep-sea habitats, including coral and sponge communities. South of the region described in the Watt et al. and Demopoulos et al. white papers, plentiful seeps occur from northern California down to the southern California Borderland. However, the underlying foundational geology associated with these seeps varies along the margin, changing with contrasting tectonic settings, from convergent tectonics to regions dominated by strike-slip faulting (Barry et al. 1996; Paull et al. 2008; Bernardo and Smith 2010; Maloney et al. 2015). For seeps located off southern California, the relationship to strike-slip fault systems may influence the distribution of seep fluid expulsion sites and associated seep habitats (Maloney et al. 2015; Grupe et al. 2015; Conrad et al., 2017), where transpression plays a key role in formation and localization of fluid seeps. Further exploration is required in order to understand these connections. Several submarine canyons intersect the shelf within this region, serving as important channels of energy and transport of sediment from shelf to slope depths. Canyons are typically associated with high currents, turbidity flows, steep and rugged terrain, and high food availability, all of which structures canyon communities and supports hotspots of biodiversity. Specific canyons along the California margin that have been well studied include Scripps and La Jolla Canyons off San Diego, and Monterey Canyon off Monterey, but many more remain relatively unexplored. Commercially important species of fish and invertebrates have been found associated with canyons, as well as deep-sea corals and sponges (e.g., Barry et al. 1996). However, in contrast to their Atlantic counterparts (e.g., through ACUMEN and ASPIRE campaigns) there has been a dearth of exploration and characterization of canyons along the California margin. A number of questions remain regarding canyon and slope wall stability and associated geohazards, plus, how the canyons connect and influence the broader regional biogeography of benthic communities is unknown. Due to their topography, seamounts along the California margin are characterized by steep slopes, large areas of rocky substrate, and high currents. Hydrological complexity is associated with seamounts given they impinge different watermasses, depending on depth range. This heterogeneity yields complex and diverse benthic communities, including commercially important fishes (e.g., Tracey et al., 2012). The geology of Davidson, Pioneer, San Juan, and Rodriquez Seamounts has received considerable study (e.g., Davis et al., 2010) but other seamounts are less known, including how they are biologically and ecologically connected. For example, research comparing the benthic communities associated with Rodriguez and San Juan Seamounts, located outside of the Channel Islands National Marine Sanctuary and within the proposed Chumash Heritage National Marine Sanctuary, to communities found within the sanctuary is critical for managing and protecting resources within the sanctuary and modifying sanctuary boundaries. Exploration would yield the data needed to delineate and characterize essential fish habitats, and deep-sea coral and sponge communities, thus directly connecting the utility of exploration and discovery to decision making. The southern California Borderland is a geomorphologically heterogeneous area created by a complex network of faults, containing deep basins separated by shallow ridges and islands. Persistent fault-related deformation has created complex features, such as exposure of scarps and uplift rocks/ridges, seeps, erosional terraces, hydrate mounds, and mud volcanoes that provide support for thriving benthic communities. That said, significant oxygen minimum zones and low aragonite saturation states persist within several of the basin environments, influencing energy flow, community ecology, and calcification. For example, the combined effects of hypoxia and acidification pose serious threats to marine organisms and biological resources along the California margin. Mapping and exploration of the extensive faults and fault scarps can help constrain historical earthquake activity. But many questions remain regarding how the underlying geology and geological processes have shaped the biological communities.

California↗

Miocene tholeiitic basalts of coastal Oregon and Washington and their relations to coeval basalts of the Columbia Plateau

Note: This paper is dedicated to Aaron and Elizabeth Waters on the occasion of Dr. Waters' retirement. Tholeiitic basalt flows and breccias of Miocene age in western Oregon and Washington form three distinct stratigraphic units. Each unit was erupted from coastal vents marked by dikes and sills of the same composition as associated extrusive rocks. The three coastal basalt units are interbedded with predominantly marine sedimentary rocks of middle to late Miocene age. These units are here named, from older to younger, the Depoe Bay Basalt, Cape Foulweather Basalt, and basalt of Pack Sack Lookout. The three units can be distinguished by their petrographic characteristics. The Depoe Bay Basalt is nonporphyritic; Cape Foulweather Basalt has sparse large labradorite phenocrysts; and Pack Sack basalt has labradorite phenocrysts with numerous pyroxene and glass inclusions as well as augite and olivine phenocrysts. Chemical analyses of basalts from these three units show that each has a distinct and uniform composition. The Depoe Bay Basalt is characterized by high SiO 2 content; the Cape Foulweather Basalt has high content of total iron, TiO 2 , and P 2 O 5 ; and Pack Sack basalt is marked by relatively high MgO and CaO content. The Depoe Bay Basalt, Cape Foulweather Basalt, and basalt of Pack Sack Lookout on the coast occur in the same stratigraphic order and are essentially the same ages as three basalt units that erupted on the Columbia Plateau. The plateau-derived units are the Yakima and late-Yakima petrographic types of Waters (1961) and the Pomona flow of Schmincke (1967). The virtual identity in chemical composition of the Depoe Bay Basalt and Yakima-type basalt, the Cape Foulweather Basalt and the late-Yakima–type basalt, and the Pack Sack basalt and the Pomona basalt flow indicate that each pair is consanguineous. Fissure vents for the plateau basalt are located in eastern Oregon and Washington and western Idaho more than 500 km east of the coastal vent areas. Thus, a regional mechanism of magma generation or emplacement is required. Three models of magma genesis considered in this report are: (1) partial melting of the subducted Juan de Fuca plate; (2) partial melting along a nearly horizontal shear zone at the base of the American plate; and (3) partial melting within the asthenosphere and fractionation during ascent of the magma.

Oregon, Washington↗

Summary of the stakeholders workshop to develop a National Volcano Early Warning System (NVEWS)

The importance of investing in monitoring, mitigation, and preparedness before natural hazards occur has been amply demonstrated by recent disasters such as the Indian Ocean Tsunami in December 2004 and Hurricane Katrina in August 2005. Playing catch-up with hazardous natural phenomena such as these limits our ability to work with public officials and the public to lessen adverse impacts. With respect to volcanic activity, the starting point of effective pre-event mitigation is monitoring capability sufficient to detect and diagnose precursory unrest so that communities at risk have reliable information and sufficient time to respond to hazards with which they may be confronted. Recognizing that many potentially dangerous U.S. volcanoes have inadequate or no ground-based monitoring, the U.S Geological Survey (USGS) Volcano Hazards Program (VHP) and partners recently evaluated U.S. volcano-monitoring capabilities and published 'An Assessment of Volcanic Threat and Monitoring Capabilities in the United States: Framework for a National Volcano Early Warning System (NVEWS).' Results of the NVEWS volcanic threat and monitoring assessment are being used to guide long-term improvements to the national volcano-monitoring infrastructure operated by the USGS and affiliated groups. The NVEWS report identified the need to convene a workshop of a broad group of stakeholders--such as representatives of emergency- and land-management agencies at the Federal, State, and local levels and the aviation sector--to solicit input about implementation of NVEWS and their specific information requirements. Accordingly, an NVEWS Stakeholders Workshop was held in Portland, Oregon, on 22-23 February 2006. A summary of the workshop is presented in this document.

Open-File Report↗

Geodetic observations and modeling of magmatic inflation at the Three Sisters volcanic center, central Oregon Cascade Range, USA

Tumescence at the Three Sisters volcanic center began sometime between summer 1996 and summer 1998 and was discovered in April 2001 using interferometric synthetic aperture radar (InSAR). Swelling is centered about 5 km west of the summit of South Sister, a composite basaltic-andesite to rhyolite volcano that last erupted between 2200 and 2000 yr ago, and it affects an area ∼20 km in diameter within the Three Sisters Wilderness. Yearly InSAR observations show that the average maximum displacement rate was 3–5 cm/yr through summer 2001, and the velocity of a continuous GPS station within the deforming area was essentially constant from June 2001 to June 2004. The background level of seismic activity has been low, suggesting that temperatures in the source region are high enough or the strain rate has been low enough to favor plastic deformation over brittle failure. A swarm of about 300 small earthquakes ( M max = 1.9) in the northeast quadrant of the deforming area on March 23–26, 2004, was the first notable seismicity in the area for at least two decades. The U.S. Geological Survey (USGS) established tilt-leveling and EDM networks at South Sister in 1985–1986, resurveyed them in 2001, the latter with GPS, and extended them to cover more of the deforming area. The 2001 tilt-leveling results are consistent with the inference drawn from InSAR that the current deformation episode did not start before 1996, i.e., the amount of deformation during 1995–2001 from InSAR fully accounts for the net tilt at South Sister during 1985–2001 from tilt-leveling. Subsequent InSAR, GPS, and leveling observations constrain the source location, geometry, and inflation rate as a function of time. A best-fit source model derived from simultaneous inversion of all three datasets is a dipping sill located 6.5 ± 2.5 km below the surface with a volume increase of 5.0 × 10 6 ± 1.5 × 10 6 m 3 /yr (95% confidence limits). The most likely cause of tumescence is a pulse of basaltic magma intruding the upper crust along the brittle–ductile interface — a process that must occur episodically beneath the Cascade Range but in the past would have escaped detection in the absence of unusual seismicity. We speculate that such intrusive episodes last from days to years and are separated by quiescent periods of decades to centuries. The likelihood that the current episode at Three Sisters will culminate in an eruption is judged to be low, but the impact of an eruption could be great. The USGS has updated its volcano hazards assessment for the Three Sisters region, notified appropriate agencies and the public, and is helping to prepare an emergency coordination and communication plan.

Central Oregon Cascade Range, Three Sisters volcan↗

Estimated Depth to Ground Water and Configuration of the Water Table in the Portland, Oregon Area

Reliable information on the configuration of the water table in the Portland metropolitan area is needed to address concerns about various water-resource issues, especially with regard to potential effects from stormwater injection systems such as UIC (underground injection control) systems that are either existing or planned. To help address these concerns, this report presents the estimated depth-to-water and water-table elevation maps for the Portland area, along with estimates of the relative uncertainty of the maps and seasonal water-table fluctuations. The method of analysis used to determine the water-table configuration in the Portland area relied on water-level data from shallow wells and surface-water features that are representative of the water table. However, the largest source of available well data is water-level measurements in reports filed by well constructors at the time of new well installation, but these data frequently were not representative of static water-level conditions. Depth-to-water measurements reported in well-construction records generally were shallower than measurements by the U.S. Geological Survey (USGS) in the same or nearby wells, although many depth-to-water measurements were substantially deeper than USGS measurements. Magnitudes of differences in depth-to-water measurements reported in well records and those measured by the USGS in the same or nearby wells ranged from -119 to 156 feet with a mean of the absolute value of the differences of 36 feet. One possible cause for the differences is that water levels in many wells reported in well records were not at equilibrium at the time of measurement. As a result, the analysis of the water-table configuration relied on water levels measured during the current study or used in previous USGS investigations in the Portland area. Because of the scarcity of well data in some areas, the locations of select surface-water features including major rivers, streams, lakes, wetlands, and springs representative of where the water table is at land surface were used to augment the analysis. Ground-water and surface-water data were combined for use in interpolation of the water-table configuration. Interpolation of the two representations typically used to define water-table position - depth to the water table below land surface and elevation of the water table above a datum - can produce substantially different results and may represent the end members of a spectrum of possible interpolations largely determined by the quantity of recharge and the hydraulic properties of the aquifer. Datasets of depth-to-water and water-table elevation for the current study were interpolated independently based on kriging as the method of interpolation with parameters determined through the use of semivariograms developed individually for each dataset. Resulting interpolations were then combined to create a single, averaged representation of the water-table configuration. Kriging analysis also was used to develop a map of relative uncertainty associated with the values of the water-table position. Accuracy of the depth-to-water and water-table elevation maps is dependent on various factors and assumptions pertaining to the data, the method of interpolation, and the hydrogeologic conditions of the surficial aquifers in the study area. Although the water-table configuration maps generally are representative of the conditions in the study area, the actual position of the water-table may differ from the estimated position at site-specific locations, and short-term, seasonal, and long-term variations in the differences also can be expected. The relative uncertainty map addresses some but not all possible errors associated with the analysis of the water-table configuration and does not depict all sources of uncertainty. Depth to water greater than 300 feet in the Portland area is limited to parts of the Tualatin Mountains, the foothills of the Cascade Range, and muc

Scientific Investigations Report↗

Sr87/Sr86, K, Na, Rb, and Sr in some eclogites and associated basalts from California and southwestern Oregon

Six samples of group C eclogites from California and southwestern Oregon have initial Sr 87 /Sr 86 ratios in the range of 0.7028 to 0.7051; Rb contents from less than 1 to 53.4 ppm; and Sr contents from 147 to 270 ppm. These data and major-element compositions suggest that the eclogites were derived from basalts older than but similar in composition to those intercalated with Mesozoic cugeosynclinal sedimentary rocks in California and western Oregon. The isotopic heterogeneity of the eclogites and associated graywackes contrasts with a uniformity of Sr 87 /Sr 86 in many younger calc-alkaline volcanic rocks of the circum-Pacific province. Derivation of the younger volcanic rocks from an eclogite-blueschist melange isotopically similar to those investigated here would require isotopic homogenization or integrated partial melting over sufficient volumes so as to reduce these variations in the derived melts.

California, Oregon↗