USGS Science⌕ Search

SEARCH · USGS Science

Results for “Hydrologic Unit”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 901 records · Page 50Linked to original sources
USGS2002

The geohydrologic setting of Yucca Mountain, Nevada

This paper provides a geologic and hydrologic framework of the Yucca Mountain region for the geochemical papers in this volume. The regional geologic units, which range in age from late Precambrian through Holocene, are briefly described. Yucca Mountain is composed of dominantly pyroclastic units that range in age from 11.4 to 15.2 Ma. The principal focus of study has been on the Paintbrush Group, which includes two major zoned and welded ash-flow tuffs separated by an important hydrogeologic unit referred to as the Paintbrush non-welded (PTn). The regional structural setting is currently one of extension, and the major local tectonic domains are presented together with a tectonic model that is consistent with the known structures at Yucca Mountain. Streamflow in this arid to semi-arid region occurs principally in intermittent or ephemeral channels. Near Yucca Mountain, the channels of Fortymile Wash and Amargosa River collect infrequent runoff from tributary basins, ultimately draining to Death Valley. Beneath the surface, large-scale interbasin flow of groundwater from one valley to another occurs commonly in the region. Regional groundwater flow beneath Yucca Mountain originates in the high mesas to the north and returns to the surface either in southern Amargosa Desert or in Death Valley, where it is consumed by evapotranspiration. The water table is very deep beneath the upland areas such as Yucca Mountain, where it is 500-750 m below the land surface, providing a large thickness of unsaturated rocks that are potentially suitable to host a nuclear-waste repository. The nature of unsaturated flow processes, which are important for assessing radionuclide migration, are inferred mainly from hydrochemical or isotopic evidence, from pneumatic tests of the fracture systems, and from the results of in situ experiments. Water seeping down through the unsaturated zone flows rapidly through fractures and more slowly through the pores of the rock matrix. Although capillary forces are expected to divert much of the flow around repository openings, some may drip onto waste packages, ultimately causing release of radionuclides, followed by transport down to the water table. ?? 2002 Elsevier Science Ltd. All rights reserved.

Applied Geochemistry↗
USGS2011

Classifying the water table at regional to continental scales

Water tables at regional to continental scales can be classified into two distinct types: recharge-controlled water tables that are largely disconnected from topography and topography-controlled water tables that are closely tied to topography. We use geomatic synthesis of hydrologic, geologic and topographic data sets to quantify and map water-table type over the contiguous United States using a dimensionless criterion introduced by Haitjema and Mitchell-Bruker (2005), called the water-table ratio, which differentiates water-table type. Our analysis indicates that specific regions of the United States have broadly contiguous and characteristic water-table types. Water-table ratio relates to water-table depth and the potential for regional groundwater flow. In regions with recharge-controlled water tables, for example the Southwest or Rocky Mountains, USA, water-tables depths are generally greater and more variable and regional groundwater flow is generally more important as a percentage of the watershed budget. Water-table depths are generally shallow and less variable, and regional groundwater flow is limited in areas with topography-controlled water tables such as the Northeast USA. The water-table ratio is a simple but powerful criterion for evaluating regional groundwater systems over broad areas.

Geophysical Research Letters↗
USGS2026

Large streamflow differences between forested and urbanized watersheds in the energy-limited eastern United States: The role of evapotranspiration and impervious surfaces

Urban forests and other green infrastructures have been viewed as part of the “Nature-based Solutions” (NbS) to mitigate emerging urban environmental change. This study focuses on the role of evapotranspiration (ET) in regulating water balances of small watersheds in the eastern United States. We compared streamflow and ET patterns at daily, monthly and annual scales and linked these hydrological variables to the physical properties of 11 paired watersheds dominated by forests (FW) or urban (UW) land covers. The annual precipitation ranged from 1028 mm to 1683 mm and potential ET (PET) from 815 mm to 1450 mm. The mean annual flow/precipitation (Q/P) ratios were 0.26 ± 0.13 and 0.41 ± 0.1 for FW and UW, respectively. Overall, UW had lower annual ET (772 mm in UW vs. 947 mm in FW), but higher mean annual and (∼58% higher), monthly water yield (17%–186% higher), and peakflow rates (up to 100 times higher) than FW. The streamflow differences between FW and UW were most pronounced during the growing season and early winter (June-November). The mean Q/P ratios for 30 large hurricane events (2016–2021) were 0.12 ± 0.11 and 0.38 ± 0.23 for FW and UW, respectively. The flow rates in the dormant season (around December-May) in UW were similar or lower than FW. We developed conceptual models to explain the seasonal and storm event streamflow differences using background climate (PET), ET, and land surface characteristics. Urban NbS designs should factor in strategies that maximize ET while minimizing impervious surfaces enhancing watershed “sponge” and “pump” functions.

eastern United States↗
USGS2011

Sources and Delivery of Nutrients to the Northwestern Gulf of Mexico from Streams in the South-Central United States

SPAtially Referenced Regressions On Watershed attributes (SPARROW) models were developed to estimate nutrient inputs [total nitrogen (TN) and total phosphorus (TP)] to the northwestern part of the Gulf of Mexico from streams in the South‐Central United States (U.S.). This area included drainages of the Lower Mississippi, Arkansas‐White‐Red, and Texas‐Gulf hydrologic regions. The models were standardized to reflect nutrient sources and stream conditions during 2002. Model predictions of nutrient loads (mass per time) and yields (mass per area per time) generally were greatest in streams in the eastern part of the region and along reaches near the Texas and Louisiana shoreline. The Mississippi River and Atchafalaya River watersheds, which drain nearly two‐thirds of the conterminous U.S., delivered the largest nutrient loads to the Gulf of Mexico, as expected. However, the three largest delivered TN yields were from the Trinity River/Galveston Bay, Calcasieu River, and Aransas River watersheds, while the three largest delivered TP yields were from the Calcasieu River, Mermentau River, and Trinity River/Galveston Bay watersheds. Model output indicated that the three largest sources of nitrogen from the region were atmospheric deposition (42%), commercial fertilizer (20%), and livestock manure (unconfined, 17%). The three largest sources of phosphorus were commercial fertilizer (28%), urban runoff (23%), and livestock manure (confined and unconfined, 23%).

Texas, Oklahoma, Arkansas, Louisiana, Missouri, Ka↗
USGS2009

Prominence of ichnologically influenced macroporosity in the karst Biscayne aquifer: Stratiform "super-K" zones

A combination of cyclostratigraphic, ichnologic, and borehole geophysical analyses of continuous core holes; tracer-test analyses; and lattice Boltzmann flow simulations was used to quantify biogenic macroporosity and permeability of the Biscayne aquifer, southeastern Florida. Biogenic macroporosity largely manifests as: (1) ichnogenic macroporosity primarily related to postdepositional burrowing activity by callianassid shrimp and fossilization of components of their complex burrow systems (Ophiomorpha); and (2) biomoldic macroporosity originating from dissolution of fossil hard parts, principally mollusk shells. Ophiomorpha-dominated ichno-fabric provides the greatest contribution to hydrologic characteristics in the Biscayne aquifer in a 345 km 2 study area. Stratiform tabular-shaped units of thalassinidean-associated macroporosity are commonly confined to the lower part of upward-shallowing high-frequency cycles, throughout aggradational cycles, and, in one case, they stack vertically within the lower part of a high-frequency cycle set. Broad continuity of many of the macroporous units concentrates groundwater flow in extremely permeable passage-ways, thus making the aquifer vulnerable to long-distance transport of contaminants. Ichnogenic macroporosity represents an alternative pathway for concentrated groundwater flow that differs considerably from standard karst flow-system paradigms, which describe groundwater movement through fractures and cavernous dissolution features. Permeabilities were calculated using lattice Boltzmann methods (LBMs) applied to computer renderings assembled from X-ray computed tomography scans of various biogenic macroporous limestone samples. The highest simulated LBM permeabilities were about five orders of magnitude greater than standard laboratory measurements using air-permeability methods, which are limited in their application to extremely permeable macroporous rock samples. Based on their close conformance to analytical solutions for pipe flow, LBMs offer a new means of obtaining accurate permeability values for such materials. We suggest that the stratiform ichnogenic groundwater flow zones have permeabilities even more extreme (???2-5 orders of magnitude higher) than the Jurassic "super-K" zones of the giant Ghawar oil field. The flow zones of the Pleistocene Biscayne aquifer provide examples of ichnogenic macroporosity for comparative analysis of origin and evolution in other carbonate aquifers, as well as petroleum reservoirs. ?? 2008 Geological Society of America.

Geological Society of America Bulletin↗
USGS2017

Control of landslide volume and hazard by glacial stratigraphic architecture, Northwest Washington state, USA

Landslide volumes span many orders of magnitude, but large-volume slides tend to travel farther and consequently can pose a greater hazard. In northwest Washington State, USA, a landscape abounding with landslides big and small, the recent occurrence of the large-volume and tragically deadly State Route 530 (Oso) landslide is a stark reminder of the hazards associated with glacial terraces lining valleys of the western Cascade Range. What controls the differences in location and size of these slope failures? Here, we examine the control on landslide volume and failure style by terrace sedimentary architecture. We analyze lidar topographic data in three nearby valleys and find significant variation in landslide deposit volumes, morphology, and relative mobility in each valley. Geologic data show that each site differs in the thickness and position of outwash, tills, and glaciolacustrine clays. Combining a three-dimensional limit-equilibrium slope-stability analysis (Scoops3D) with simulations of variably saturated groundwater flow (VS2Dt), we show that landslide volumes are highly sensitive both to the distribution of material strength as well as the location of perched water tables. Modeled landslides match observed failure sizes and depths in all valleys when the effects of variably saturated groundwater flow are included. The position and thickness of low-strength strata act as first-order controls on landslide volume, with peak volumes for stratigraphic geometries similar to that of the valley containing the Oso landslide. Knowledge of feedbacks between lithology and hydrology is therefore critical to assess the landslide hazard and evolution of landscapes composed of stratigraphically layered units.

Washington↗
USGS2007

Three-dimensional geologic model of the northern Nevada rift and the Beowawe geothermal system, north-central Nevada

A three-dimensional (3D) geologic model of part of the northern Nevada rift encompassing the Beowawe geothermal system was developed from a series of two-dimensional (2D) geologic and geophysical models. The 3D model was constrained by local geophysical, geologic, and drill-hole information and integrates geologic and tectonic interpretations for the region. It places important geologic constraints on the extent and configuration of the active Beowawe geothermal system. The geologic framework represented in this model facilitates hydrologic modeling of the Beowawe geothermal system and evaluation of fluid flow in faults and adjacent rock units. Basin depths were determined using an iterative gravity-inversion technique that calculates the thickness of low-density, basin-filling deposits. The remaining subsurface structure was modeled using 2D potential-field modeling software. Crustal cross sections from the 2D models were generalized for use in the 3D model and consist of six stratigraphic layers defined as low-density basin sediments, volcanic rocks, basalt-andesite rocks of the northern Nevada rift, Jurassic and Cretaceous intrusive rocks, and Paleozoic siliceous and carbonate sedimentary rocks of the upper and lower plates of the Roberts Mountains allochthon, respectively. This simplified stratigraphy was combined with mapped surface geology and was extrapolated across the 3D model area. Features along the northern Nevada rift depicted by the model may represent preexisting crustal structures that controlled the locations and character of Tertiary tectonic and magmatic events related to Basin and Range extension and emplacement of the middle Miocene northern Nevada rift. Several of the geologic features represented are important components of the Beowawe geothermal system. Prominent ENE-trending faults (e.g., Malpais fault) that bound the southern edge of Whirlwind Valley, and older NNW-striking faults (e.g., Dunphy Pass and Muleshoe faults) that form major features of the model, are likely important pathways for geothermal fluids and groundwater flow from the Humboldt River, which may recharge the Beowawe system.

Nevada↗
USGS1998

USGS Mineral Resources Program: International Activities

The USGS is the country's leading earth science organization. Since 1879, USGS scientists have gathered and analyzed data and disseminated the results of their research on the geology, cartography, hydrology, and, more recently biology, of every continent and ocean on Earth. Multidisciplinary research both in the United States and in the international arena has been an important part of the USGS mission. The USGS Mineral Resources Program is the sole Federal agency program that provides high-quality scientific information, objective resource assessments, and unbiased research results on mineral issues

Fact Sheet↗
USGS2026

Special Contributing Area Loading Program user’s manual

Information on the Special Contributing Area Loading Program execution and functions are presented in this user’s manual. An appendix presents a potential improvement for the user to consider. The hydrologic routing simulation method to model flow through multiple reservoirs, or sewer system components, is described. The use of Special Contributing Areas is described to run a successful simulation, which includes user input of hydrologic time series of flow components and the necessary formats. Upon completion of a successful Special Contributing Area Loading Program simulation, the program outputs hydrologic time series and a descriptive text file containing the model results for each defined sub-unit, or Special Contributing Area. The output time series contain flows through, and overflows from, the three reservoirs in the series, and the text file contains input and output path locations.

Open-File Report↗
USGS2009

Three-dimensional numerical model of ground-water flow in northern Utah Valley, Utah County, Utah

A three-dimensional, finite-difference, numerical model was developed to simulate ground-water flow in northern Utah Valley, Utah. The model includes expanded areal boundaries as compared to a previous ground-water flow model of the valley and incorporates more than 20 years of additional hydrologic data. The model boundary was generally expanded to include the bedrock in the surrounding mountain block as far as the surface-water divide. New wells have been drilled in basin-fill deposits near the consolidated-rock boundary. Simulating the hydrologic conditions within the bedrock allows for improved simulation of the effect of withdrawal from these wells. The inclusion of bedrock also allowed for the use of a recharge model that provided an alternative method for spatially distributing areal recharge over the mountains. The model was calibrated to steady- and transient-state conditions. The steady-state simulation was developed and calibrated by using hydrologic data that represented average conditions for 1947. The transient-state simulation was developed and calibrated by using hydrologic data collected from 1947 to 2004. Areally, the model grid is 79 rows by 70 columns, with variable cell size. Cells throughout most of the model domain represent 0.3 mile on each side. The largest cells are rectangular with dimensions of about 0.3 by 0.6 mile. The largest cells represent the mountain block on the eastern edge of the model domain where the least hydrologic data are available. Vertically, the aquifer system is divided into 4 layers which incorporate 11 hydrogeologic units. The model simulates recharge to the ground-water flow system as (1) infiltration of precipitation over the mountain block, (2) infiltration of precipitation over the valley floor, (3) infiltration of unconsumed irrigation water from fields, lawns, and gardens, (4) seepage from streams and canals, and (5) subsurface inflow from Cedar Valley. Discharge of ground water is simulated by the model to (1) flowing and pumping wells, (2) drains and springs, (3) evapotranspiration, (4) Utah Lake, (5) the Jordan River and mountain streams, and (6) Salt Lake Valley by subsurface outflow through the Jordan Narrows. During steady-state calibration, variables were adjusted within probable ranges to minimize differences between model-computed and measured water levels as well as between model-computed and independently estimated flows that include: recharge by seepage from individual streams and canals, discharge by seepage to individual streams and the Jordan River, discharge to Utah Lake, discharge to drains and springs, discharge by evapotranspiration, and subsurface flows into and out of northern Utah Valley from Cedar Valley and to Salt Lake Valley, respectively. The transient-state simulation was calibrated to measured water levels and water-level changes with consideration given to annual changes in the flows listed above.

Utah↗
USGS2014

Watershed characteristics and water-quality trends and loads in 12 watersheds in Gwinnett County, Georgia

The U.S. Geological Survey, in cooperation with Gwinnett County Department of Water Resources, established a Long-Term Trend Monitoring (LTTM) program in 1996. The LTTM program is a comprehensive, long-term, water-quantity and water-quality monitoring program designed to document and analyze the hydrologic and water-quality conditions of selected watersheds of Gwinnett County, Georgia. Water-quality monitoring initially began in six watersheds and was expanded to another six watersheds in 2001. As part of the LTTM program, streamflow, precipitation, water temperature, specific conductance, and turbidity were measured continuously at the 12 watershed monitoring stations for water years 2004–09. In addition, discrete water-quality samples were collected seasonally from May through October (summer) and November through April (winter), including one base-flow and three stormflow event composite samples, during the study period. Samples were analyzed for nutrients (nitrogen and phosphorus), total organic carbon, trace elements (total lead and total zinc), total dissolved solids, and total suspended sediment (total suspended solids and suspended-sediment concentrations). The sampling scheme was designed to identify variations in water quality both hydrologically and seasonally. The 12 watersheds were characterized for basin slope, population density, land use for 2009, and the percentage of impervious area from 2000 to 2009. Precipitation in water years 2004–09 was about 18 percent below average, and the county experienced exceptional drought conditions and below average runoff in water years 2007 and 2008. Watershed water yields, the percentage of precipitation that results in runoff, typically are lower in low precipitation years and are higher for watersheds with the highest percentages of impervious areas. A comparison of base-flow and stormflow water-quality samples indicates that turbidity and concentrations of total ammonia plus organic nitrogen, total nitrogen, total phosphorus, total organic carbon, total lead, total zinc, total suspended solids, and suspended-sediment concentrations increased with increasing discharge at all watersheds. Specific conductance, however, decreased during stormflow at all watersheds, and total dissolved solids concentrations decreased during stormflow at a few of the watersheds. Total suspended solids and suspended-sediment concentrations typically were two orders of magnitude higher in stormflow samples, turbidities were about 1.5 orders of magnitude higher, total phosphorus and total zinc were about one order of magnitude higher, and total ammonia plus organic nitrogen, total nitrogen, total organic carbon, and total lead were about twofold higher than in base-flow samples. Seasonal patterns and long-term trends in flow-adjusted water-quality concentrations were identified for five representative constituents—total nitrogen, total phosphorus, total zinc, total dissolved solids, and total suspended solids. Seasonal patterns for all five constituents were fairly similar, with higher concentrations in the summer and lower concentrations in the winter. Significant linear long-term trends in stormflow composite concentrations were identified for 36 of the 60 constituent-watershed combinations (5 constituents multiplied by 12 watersheds) for the period of record through water year 2011. Significant trends typically were decreasing for total nitrogen, total phosphorus, total suspended solids, and total zinc and increasing for total dissolved solids. Total dissolved solids and total suspended solids trends had the largest magnitude changes per year. Stream water loads were estimated for 10 water-quality constituents. These estimates represent the cumulative effects of watershed characteristics, hydrologic processes, biogeochemical processes, climatic variability, and human influences on watershed water quality. Yields, in load per unit area, were used to compare loads from watersheds with different sizes. A load estimation approach developed for the Gwinnett County LTTM program that incorporates storm-event composited samples was used with some minor modifications. This approach employs the commonly used regression-model method. Concentrations were modeled as a function of discharge, time, season, and turbidity to improve model predictions and reduce errors in load estimates. Total suspended solids annual loads have been identified in Gwinnett County’s Watershed Protection Plan for target performance criterion. The amount of annual runoff is the primary factor in determining the amount of annual constituent loads. Below average runoff during water years 2004–09, especially during water years 2006–08, resulted in corresponding below average loads. Variations in constituent yields between watersheds appeared to be related to various watershed characteristics. Suspended sediment (total suspended solids and suspended-sediment concentrations) along with constituents transported predominately in solid phase (total phosphorus, total organic carbon, total lead, and total zinc) and total dissolved solids typically had higher yields from watersheds that had high percentages of impervious areas or high basin slope. High total nitrogen yields were also associated with watersheds with high percentages of impervious areas. Low total nitrogen, total suspended solids, total lead, and total zinc yields appear to be associated with watersheds that have a low percentage of high-density development. Total suspended solids yields were lower in drought years, water years 2007–08, from the combined effects of less runoff and the result of fewer, lower magnitude storms, which likely resulted in less surface erosion and lower stream sediment transport.

Georgia↗
USGS2014

Hydrogeologic framework and occurrence, movement, and chemical characterization of groundwater in Dixie Valley, west-central Nevada

Dixie Valley, a primarily undeveloped basin in west-central Nevada, is being considered for groundwater exportation. Proposed pumping would occur from the basin-fill aquifer. In response to proposed exportation, the U.S. Geological Survey, in cooperation with the Bureau of Reclamation and Churchill County, conducted a study to improve the understanding of groundwater resources in Dixie Valley. The objective of this report is to characterize the hydrogeologic framework, the occurrence and movement of groundwater, the general water quality of the basin-fill aquifer, and the potential mixing between basin-fill and geothermal aquifers in Dixie Valley. Various types of geologic, hydrologic, and geochemical data were compiled from previous studies and collected in support of this study. Hydrogeologic units in Dixie Valley were defined to characterize rocks and sediments with similar lithologies and hydraulic properties influencing groundwater flow. Hydraulic properties of the basin-fill deposits were characterized by transmissivity estimated from aquifer tests and specific-capacity tests. Groundwater-level measurements and hydrogeologic-unit data were combined to create a potentiometric surface map and to characterize groundwater occurrence and movement. Subsurface inflow from adjacent valleys into Dixie Valley through the basin-fill aquifer was evaluated using hydraulic gradients and Darcy flux computations. The chemical signature and groundwater quality of the Dixie Valley basin-fill aquifer, and potential mixing between basin-fill and geothermal aquifers, were evaluated using chemical data collected from wells and springs during the current study and from previous investigations. Dixie Valley is the terminus of the Dixie Valley flow system, which includes Pleasant, Jersey, Fairview, Stingaree, Cowkick, and Eastgate Valleys. The freshwater aquifer in the study area is composed of unconsolidated basin-fill deposits of Quaternary age. The basin-fill hydrogeologic unit can be several orders of magnitude more transmissive than surrounding and underlying consolidated rocks and Dixie Valley playa deposits. Transmissivity estimates in the basin fill throughout Dixie Valley ranged from 30 to 45,500 feet squared per day; however, a single transmissivity value of 0.1 foot squared per day was estimated for playa deposits. Groundwater generally flows from the mountain range uplands toward the central valley lowlands and eventually discharges near the playa edge. Potentiometric contours east and west of the playa indicate that groundwater is moving eastward from the Stillwater Range and westward from the Clan Alpine Mountains toward the playa. Similarly, groundwater flows from the southern and northern basin boundaries toward the basin center. Subsurface groundwater flow likely enters Dixie Valley from Fairview and Stingaree Valleys in the south and from Jersey and Pleasant Valleys in the north, but groundwater connections through basin-fill deposits were present only across the Fairview and Jersey Valley divides. Annual subsurface inflow from Fairview and Jersey Valleys ranges from 700 to 1,300 acre-feet per year and from 1,800 to 2,300 acre-feet per year, respectively. Groundwater flow between Dixie, Stingaree, and Pleasant Valleys could occur through less transmissive consolidated rocks, but only flow through basin fill was estimated in this study. Groundwater in the playa is distinct from the freshwater, basin-fill aquifer. Groundwater mixing between basin-fill and playa groundwater systems is physically limited by transmissivity contrasts of about four orders of magnitude. Total dissolved solids in playa deposit groundwater are nearly 440 times greater than total dissolved solids in the basin-fill groundwater. These distinctive physical and chemical flow restrictions indicate that groundwater interaction between the basin fill and playa sediments was minimal during this study period (water years 2009–11). Groundwater in Dixie Valley generally can be characterized as a sodium bicarbonate type, with greater proportions of chloride north of the Dixie Valley playa, and greater proportions of sulfate south of the playa. Analysis of major ion water chemistry data sampled during the study period indicates that groundwater north and south of Township 22N differ chemically. Dixie Valley groundwater quality is marginal when compared with national primary and secondary drinking-water standards. Arsenic and fluoride concentrations exceed primary drinking water standards, and total dissolved solids and manganese concentrations exceed secondary drinking water standards in samples collected during this study. High concentrations of boron and tungsten also were observed. Chemical comparisons between basin-fill and geothermal aquifer water indicate that most basin-fill groundwater sampled could contain 10–20 percent geothermal water. Geothermal indicators such as high temperature, lithium, boron, chloride, and silica suggest that mixing occurs in many wells that tap the basin-fill aquifer, particularly on the north, south, and west sides of the basin. Magnesium-lithium geothermometers indicate that some basin-fill aquifer water sampled for the current study likely originates from water that was heated above background mountain-block recharge temperatures (between 3 and 15 degrees Celsius), highlighting the influence of mixing with warm water that was possibly derived from geothermal sources.

Nevada↗
USGS1925

The artesian water supply of the Dakota sandstone in North Dakota, with special reference to the Edgeley quadrangle

The Dakota sandstone and the overlying dense plastic shales form the most remarkable artesian basin in the United States with respect to its great extent, the long distances through which its water has percolated from the outcrops of the sandstone in the western mountains to the areas of artesian flow, and especially the tremendous pressure under which the water in the sandstone was originally by thick and continuous cover of impermeable shales. In 1882 a well was drilled to the Dakota sandstone at Aberdeen, S. Dak., by the Chicago, Milwaukee & St. Paul Railway Co. This well was reported by Nettleton 1 to have been "the first bore put down which reached the artesian basin of the Dakotas." In 1896 Darton 2 estimated that about 400 artesian wells had been drilled to the Dakota sandstone, presumably in South Dakota and adjacent parts of the artesian basin in North Dakota which he investigated. 3 The strongest of these wells had pressures ranging from 100 to more than 200 pounds to the square inch and flows ranging from 1,000 to more than 4,000 gallons a minute. The present brief paper is based chiefly on the data that have been obtained in the successive surveys in regard to about 230 artesian wells in or near the Edgeley quadrangle. A table of these well data is on file in the United States Geological Survey and is to be published in the detailed report on the geology and hydrology of the Edgeley and La Moure quadrangles that has been prepared by Mr. Hard. The well data obtained by Mr. Hard have already been published in a report prepared by him in his capacity as State flood-control engineer.

North Dakota↗
USGS2021

Hierarchical clustering for paired watershed experiments: Case study in southeastern Arizona, U.S.A.

Watershed studies are often onerous due to a lack of data available to portray baseline conditions with which to compare results of monitoring environmental effects. A paired-watershed approach is often adopted to simulate baseline conditions in an adjacent watershed that can be comparable but assumes there is a quantifiable relationship between the control and treated watersheds. Finding suitably matched pairs that can most accurately depict similar responses is challenging and attributes are rarely quantified. In southeastern Arizona, United States, researchers are investigating the effectiveness of watershed restoration techniques employed by land managers. We selected Smith Canyon to develop a rigorous and quantitatively defensible paired-watershed experimental design. The Smith Canyon watershed consists of 91 structurally similar sub-basins that have a defined basin-like structure and flow channel, allowing for consideration as replicate units. We developed a statistical approach to group sub-basins based on similar structural, biophysical, and hydrologic traits. Our geospatial database consisted of 35 environmental variables, which we reduced to 12 through a correlation analysis. We identified three primary collections of paired sub-basins within the larger watershed. These clusters are being used to inform studies actively being employed in the watershed. Overall, we propose a hierarchical clustering protocol for justification of watershed pairing experiments.

Arizona↗
USGS1993

Simulated effects of the proposed Garrison Diversion Unit on streamflow and dissolved solids in the Sheyenne River and the Red River of the North, North Dakota and Minnesota

Future development of the Garrison Diversion Unit in North Dakota could deliver 100 cubic feet per second of water for the cities of Fargo, Grand Forks, and surrounding communities. Missouri River water from the Garrison Diversion Unit Sheyenne River water supply would be delivered to the upper reaches of the Sheyenne River, which would convey the water to the Red River of the North. Potential effects of releasing Missouri River water to the Sheyenne River on the quantity and quality of streamflow in the Sheyenne River and in the Red River of the North are evaluated for two proposed operating plans year-round operation (12 months each year) and nonwinter operation (April through October each year). The Project Canals, Reservoirs, and River Systems (PROCRRS) and Canals, Rivers, and Reservoirs Salinity Accounting Procedures (CRRSAP) monthly accounting models are used to predict streamflow and dissolved-solids changes that could result from the proposed release of treated Missouri River water into the Sheyenne River and the Red River of the North. For year-round operation of the Garrison Diversion Unit Sheyenne River water supply for the period 1931-84, the maximum quantity of water that must be delivered to the upper reaches of the Sheyenne River so that 100 cubic feet per second of Missouri River water can be delivered to Fargo, N.Dak., and Grand Forks, N.Dak., was estimated to be about 151 cubic feet per second for August 1976. For nonwinter operation the maximum quantity of water was estimated to be about 210 cubic feet per second. Model simulations were used to assess the effects that operation of the Garrison Diversion Unit Sheyenne River water supply could have on streamflow and water quality of the Sheyenne River and the Red River of the North. Effects were assessed by comparing simulated streamflows that include Missouri River water to baseline conditions, which represent hydrologic conditions before addition of Missouri River water. Simulated mean monthly dissolved-solids concentrations for Sheyenne River nodes for year-round and nonwinter operation of the Garrison Diversion Unit Sheyenne River water supply generally were less than those for baseline conditions. Simulated mean monthly dissolved-solids concentrations for Red River of the North nodes for year-round and nonwinter operation generally were greater than those for baseline conditions. Streamflow for 1933-42 was about 25 percent of the mean annual streamflow for 1931-84. Simulated monthly mean dissolved-solids concentrations for year-round and nonwinter operation for node 125, Sheyenne River near Cooperstown, N.Dak., for the low-flow conditions of 1933-42 were less than those for baseline conditions. Annual variability of simulated dissolved-solids concentrations for year-round operation was less than annual variability for nonwinter operation and for baseline conditions. Simulated monthly mean dissolved-solids concentrations for year-round and nonwinter operation for node 250, Sheyenne River near Kindred, N.Dak., for the low-flow conditions of 1933-42 ranged from 500 to 600 milligrams per liter. Simulated monthly mean dissolved-solids concentrations for baseline conditions ranged from 300 milligrams per liter to greater than 1,000 milligrams per liter. Simulated monthly mean dissolved-solids concentrations for nonwinter operation were less than those for year-round operation. For node 700, Red River of the North at Grand Forks, N.Dak., the magnitude of simulated monthly mean dissolved-solids concentrations for year-round and nonwinter operation for the low-flow conditions of 1933-42 were about the same as those for baseline conditions. Streamflow for 1973-82 was about 30 percent greater than the mean annual streamflow for 1931-84. For the high-flow conditions of 1973-82, simulated monthly mean dissolved-solids concentrations for node 125 for year-round operation ranged from about 325 to 650 milligrams per liter, and simulated monthly mean dissolved-solids concentrations for baseline conditions and for nonwinter operation generally ranged from 325 to 800 milligrams per liter. Simulated monthly mean dissolved-solids concentrations for node 250 for year-round and nonwinter operation were about the same as those for baseline conditions. Simulated monthly mean dissolved-solids concentrations for node 700 for year-round and nonwinter operation also were about the same as those for baseline conditions.

Minnesota, North Dakota↗
USGS1974

Water quality of hydrologic bench marks; an indicator of water quality in the natural environment

Water-quality data, collected at 57 hydrologic bench-mark stations in 37 States, allow the definition of water quality in the 'natural' environment and the comparison of 'natural' water quality with water quality of major streams draining similar water-resources regions. Results indicate that water quality in the 'natural' environment is generally very good. Streams draining hydrologic bench-mark basins generally contain low concentrations of dissolved constituents. Water collected at the hydrologic bench-mark stations was analyzed for the following minor metals: arsenic, barium, cadmium, hexavalent chromium, cobalt, copper, lead, mercury, selenium, silver, and zinc. Of 642 analyses, about 65 percent of the observed concentrations were zero. Only three samples contained metals in excess of U.S. Public Health Service recommended drinking-water standards--two selenium concentrations and one cadmium concentration. A total of 213 samples were analyzed for 11 pesticidal compounds. Widespread but very low-level occurrence of pesticide residues in the 'natural' environment was found--about 30 percent of all samples contained low-level concentrations of pesticidal compounds. The DDT family of pesticides occurred most commonly, accounting for 75 percent of the detected occurrences. The highest observed concentration of DDT was 0.06 microgram per litre, well below the recommended maximum permissible in drinking water. Nitrate concentrations in the 'natural' environment generally varied from 0.2 to 0.5 milligram per litre. The average concentration of nitrate in many major streams is as much as 10 times greater. The relationship between dissolved-solids concentration and discharge per unit area in the 'natural' environment for the various physical divisions in the United States has been shown to be an applicable tool for approximating 'natural' water quality. The relationship between dissolved-solids concentration and discharge per unit area is applicable in all the physical divisions of the United States, except the Central Lowland province of the Interior Plains, the Great Plains province of the Interior Plains, and the Basin and Ridge province of the Intermontane Plateaus. The relationship between dissolved-solids concentration and discharge per unit area is least variable in the New England province and Blue Ridge province of the Appalachian Highlands. The dissolved-solids concentration versus discharge per unit area in the Central Lowland province of the Interior Plains is highly variable. A sample collected from the hydrologic bench-mark station at Bear Den Creek near Mandaree, N. Dak., contained 3,420 milligrams per litre dissolved solids. This high concentration in the 'natural' environment indicates that natural processes can be principal agents in modifying the environment and can cause degradation. Average annual runoff and rock type can be used as predictive tools to determine the maximum dissolved-solids concentration expected in the 'natural' environment.

Circular↗
USGS2010

Use of output from high‐resolution atmospheric models in landscape‐scale hydrologic models: An assessment

In this paper we investigate the feasibility of coupling regional climate models (RCMs) with landscape‐scale hydrologic models (LSHMs) for studies of the effects of climate on hydrologic systems. The RCM used is the National Center for Atmospheric Research/Pennsylvania State University mesoscale model (MM4). Output from two year‐round simulations (1983 and 1988) over the western United States is used to drive a lake model for Pyramid Lake in Nevada and a streamfiow model for Steamboat Creek in Oregon. Comparisons with observed data indicate that MM4 is able to produce meteorologic data sets that can be used to drive hydrologic models. Results from the lake model simulations indicate that the use of MM4 output produces reasonably good predictions of surface temperature and evaporation. Results from the streamflow simulations indicate that the use of MM4 output results in good simulations of the seasonal cycle of streamflow, but deficiencies in simulated wintertime precipitation resulted in underestimates of streamflow and soil moisture. Further work with climate (multiyear) simulations is necessary to achieve a complete analysis, but the results from this study indicate that coupling of LSHMs and RCMs may be a useful approach for evaluating the effects of climate change on hydrologic systems.

Water Resources Research↗
USGS1996

Sampling design for assessing water quality of the Red River of the North basin, Minnesota, North Dakota, and South Dakota, 1993-1995

This map report describes the sampling design for a comprehensive regional assessment of water quality in the Red River of the North Basin, a study unit under the U.S. Geological Survey’s National Water-Quality Assessment Program. The sampling design was developed to address questions about the presence, distribution, and loads of nutrients and pesticides associated with large agricultural regions in the basin and across the Nation. The design also begins to address major local and regional concerns about suspended sediment in surface water and naturally occurring salinity in ground water. Recognizing that the Red River of the North Basin study unit realistically could not be analyzed as a single homogeneous area, a hierarchical sampling stratification for assessing water quality was developed. Landscape features consisting of physiography, soils, land cover and land use, and cropping patterns provided the environmental framework for stratification of streams and surficial aquifers. The environmental framework characterizes the climate and hydrology and relates closely to an ecoregions framework. The environmental and ecoregions frameworks were considered in locating ecological sampling sites. For the subsurface framework, buried sand and gravel aquifers in study unit were subdivided into two general subregions of differing potential saline recharge from underlying bedrock aquifers. Actual sampling sites for streams, aquatic biology, and ground water were described within the proposed sampling stratification. Practical considerations of previously established sampling sites, background information from previous hydrologic investigations, and site suitability for sampling protocols also were considered for final site selection.

Minnesota, North Dakota, South Dakota↗