SEARCH · USGS Science

Results for “Contributions to Mineralogy and Petrology”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

1,674 records · Page 50Linked to original sources

USGS2025

Fossil diatoms in Arctic marine surface sediments

Diatoms are one of the main constituents of marine phytoplankton in the Arctic, and thanks to their siliceous skeletons, diatom fossils are relatively well preserved in sediments. Due to their species-specific sensitivity to different ocean conditions, their abundance and assemblages in sediments are routinely used by paleoceanographers to reconstruct the state of the surface ocean in the past (Koç 2007). By using statistical methods, we can obtain valuable knowledge about their ecological preferences (Oksman et al. 2019) and generate quantitative reconstructions of various parameters, such as sea-surface temperature and sea-ice concentration through time (Krawczyk et al. 2021; Sha et al. 2014). The Marine Arctic Diatoms (MARDI) working group (WG) ( pastglobalchanges.org/mardi ) aims to advance knowledge on marine-diatom ecology and diatom-based reconstructions by compiling and harmonizing data from surface-sediment samples across the Arctic.

Pages Magazine↗

USGS2025

Conceptual and numerical groundwater flow model of the Iowa River alluvial aquifer near Tama County, Iowa, 1980 through 2022

The Iowa River alluvial aquifer is an important source of water on the Meskwaki Settlement in Tama County, Iowa, which is land owned by the Sac & Fox Tribe of the Mississippi in Iowa (commonly known as the Meskwaki Nation). The U.S. Geological Survey constructed a groundwater flow model, including a conceptual and numerical model, of the Iowa River alluvial aquifer and underlying hydrogeologic units near the Meskwaki Settlement in Tama County, Iowa, for the period of January 1980–August 2022 to estimate the fraction of water pumped from the Iowa River alluvial aquifer by Meskwaki Settlement wells that is derived from streamflow depletion in the Iowa River and its tributaries. Streamflow depletion is a reduction in streamflow caused by groundwater pumping and includes the interception by groundwater production wells of water that otherwise would have been discharged to streams (called “captured groundwater discharge”) and induced infiltration of streamflow to the production wells. Calibrated model runs were performed with no simulated pumping and simulated pumping only at Meskwaki Settlement wells, and the change in simulated flow rates between the groundwater system and streams for the two model runs represents the amount of streamflow depletion in the Iowa River and tributary streams resulting from pumping at the Meskwaki Settlement wells. Streamflow depletion in the Iowa River and its tributaries as a percentage of simulated pumping at the Meskwaki Settlement wells was calculated by dividing this difference by the total simulated pumping rate for the Meskwaki Settlement wells. The model results demonstrate that the mean monthly streamflow depletion, including induced infiltration and captured discharge, in the Iowa River and its tributary streams as a percentage of mean monthly pumping at the Meskwaki Settlement wells was 97.4 percent and ranged from 65.4 to 112 percent. Of the total streamflow depletion, mean monthly induced recharge was 20.9 percent and ranged from 4.9 to 37.2 percent. Mean monthly captured discharge was 76.5 percent and ranged from 57.1 to 97.1 percent. These results indicate that most of the water pumped from the Meskwaki Settlement wells is the result of streamflow depletion, in the form of both induced infiltration and captured discharge.

Iowa↗

USGS2025

Ambient field seismology in critical zone hydrological sciences

Passive ambient noise monitoring is an emerging tool in environmental seismology, leveraging the ambient seismic field to assess temporal variations in shallow subsurface properties. This review focuses on the potential and challenges of using scattered coda waves from noise correlation functions to monitor critical zone dynamics. The sensitivity of seismic velocities to various environmental factors, including precipitation, snowmelt, atmospheric pressure, and groundwater fluctuations, underscores the method’s versatility. While coda waves excel in detecting subtle changes due to their scattered nature, ballistic waves provide higher spatial resolution, albeit with challenges in source stability. Advances in seismic sensing, including distributed acoustic sensing and low-cost geophone networks, have enabled high-resolution monitoring of hydrological processes, subsurface deformation, and seismic hazards. Integrating seismic data with hydrological models provides insights into water storage, pore pressure changes, and soil moisture dynamics. However, limitations in spatial resolution, calibration with ground truth data, and coupled effects between environmental factors remain key challenges. This review emphasizes the importance of interdisciplinary approaches in refining methodologies, enhancing sensor deployments, and addressing data gaps. Passive seismic monitoring offers opportunities to understand critical zone processes and their broader impacts on seismic hazards and environmental sustainability.

Comptes Rendus. Géoscience↗

USGS2025

Comparative properties of saponitic fault gouge and serpentinite muds cored from mud volcanoes of the Mariana subduction zone

We obtained 12 core samples for physical and chemical characterization from three serpentinite mud volcanoes (Yinazao, Asùt Tesoru, and Fantangisña) located on the forearc of the Mariana subduction system, that were drilled during International Ocean Discovery Program Expedition 366. Two samples from the Fantangisña mud volcano are interpreted to be clay-rich fault gouges derived from the subduction channel. Their bulk compositions are intermediate between the serpentinites and oceanic basalts. The oceanic crustal materials in the gouges have been thoroughly metasomatized and the serpentinites extensively altered to the trioctahedral, Mg-rich smectite clays saponite and corrensite. The only relict phases in clasts of crustal rock are accessory Ti- and P-bearing minerals. The two fault gouge samples have lower frictional strengths ( μ < 0.2) than the serpentinites ( μ = 0.2–0.4), and their measured permeabilities are also somewhat lower. Their physical and compositional properties correspond to saponitic gouges from other faults that juxtapose serpentinite against crustal rocks, in particular gouges from the two creeping traces of the San Andreas Fault recovered in the core from the San Andreas Fault Observatory at Depth. The décollement beneath Fantangisña mud volcano is thus expected to be very weak and likely characterized by stable slip.

Geophysics, Geochemistry, Geosystems↗

USGS2025

PEST++IES how many iterations & realizations, finding the point of diminishing returns

PEST++IES (White 2018; White et al. 2020) is widely used in the groundwater modeling community for its ability to perform computationally efficient history matching and uncertainty analysis in a highly parameterized context. One primary advantage of using an iterative ensemble smoother is that the number of model runs required per iteration depends on the number of realizations in an ensemble, not the number of parameters in each realization. However, this raises the question: what is the optimal number of realizations and iterations to use for any one model before the point of diminishing returns? Using a modified version of the Freyberg model (Freyberg 1988; Hunt et al. 2020), different parameter and observation scenarios were evaluated for four iterations and ensembles of 10, 25, 50, 100, 250, 500, 1000, and 2000 realizations. To match observations, PEST++IES altered hydraulic conductivity ( k ), both globally across the model and locally at three different pilot point densities, as well as global recharge (via a single multiplier), global river conductance, and individual well flow rates. Risk-based well capture zone results (Fienen et al. 2022a) and estimated hydraulic conductivity fields from each scenario were quantitatively and qualitatively compared against the “truth” model and its outputs. Across the cases examined, ensemble sizes of 100 to 250 realizations and two PEST++IES iterations were generally sufficient to achieve good results.

Groundwater↗

USGS2025

Hydrologic variability and groundwater age of springs in eastern Oregon and northern Nevada, USA

The ecological importance of springs in semiarid regions is far greater than their small size and sparse distribution, yet little is known about the hydrologic functioning of these systems. During 2016–22, 261 springs were visited in the volcanic terrane of eastern Oregon and northern Nevada. When conditions were suitable, measurements of discharge, water temperature, and specific conductance were made, and samples for the analysis of carbon-14, tritium, and water stable isotopes (WSI) were collected. A subset of 60 springs was revisited during different seasons in the same year and during the dry season in multiple years to evaluate variability in discharge, chemistry, and groundwater age. Specific conductance and WSI varied considerably among springs across the study area but were unexpectedly stable across seasons and years at individual springs. Seasonal and interannual variability in spring discharge was related to the residence time of the discharging groundwater. Springs discharging older groundwater (10 3 –10 4 years) had significantly less variability in their discharge compared to springs discharging younger groundwater (10 0 –10 1 years). Variability among springs discharging younger groundwater included cessation of late-summer discharge at 18 % of the repeat-visit springs. A logistic regression model predicted the age of discharging spring water with 89 % accuracy using only the spring latitude, longitude, elevation, and δ 2 H value. This study framework provides a simple, inexpensive, and robust method to provisionally assess the hydrologic behavior of springs having little or no prior information in understudied, semiarid regions across the globe.

Nevada, Oregon↗

USGS2025

Towards mobile wind measurements using joust configured ultrasonic anemometer for applications in gas flux quantification

Small uncrewed aerial systems (sUASs) can be used to quantify emissions of greenhouse and other gases, providing flexibility in quantifying these emissions from a multitude of sources, including oil and gas infrastructure, volcano plumes, wildfire emissions, and natural sources. However, sUAS-based emission estimates are sensitive to the accuracy of wind speed and direction measurements. In this study, we examined how filtering and correcting sUAS-based wind measurements affects data accuracy by comparing data from a miniature ultrasonic anemometer mounted on a sUAS in a joust configuration to highly accurate wind data taken from a nearby eddy covariance flux tower (aka the Tower). These corrections had a small effect on wind speed error, but reduced wind direction errors from 50° to >120° to 20–30°. A concurrent experiment examining the amount of error due to the sUAS and the Tower not being co-located showed that the impact of this separation was 0.16–0.21 ms − 1 "> ms − 1 , a small influence on wind speed errors. Lower wind speed errors were correlated with lower turbulence intensity and higher relative wind speeds. There were also some loose trends in diminished wind direction errors at higher relative wind speeds. Therefore, to improve the quality of sUAS-based wind measurements, our study suggested that flight planning consider optimizing conditions that can lower turbulence intensity and maximize relative wind speeds as well as include post-flight corrections.

Alaska↗

USGS2025

Wet meadow regeneration through restoration of biophysical feedbacks

Wet meadows are globally significant ecosystems that provide critical hydrological, ecological, and biogeochemical functions, yet their extent has declined dramatically due to land use changes and hydrologic alteration. These sedge-dominated wetlands exist at the drier end of the wetland gradient, maintained by shallow groundwater and periodic inundation. This paper is a global synthesis of the ecological, geomorphic, and hydrological dynamics of wet meadows, with an emphasis on alluvial systems, to inform effective restoration strategies. We compare wet meadows to other wetlands, classify them into palustrine, lacustrine, and alluvial types, then focus on alluvial wet meadows and discuss how their formation and persistence depend on ground and surface water interactions, sediment deposition and flow obstructions, all mediated by biological processes. In particular, we highlight the role of hydric graminoids in resisting erosion and maintaining soil cohesion, how beaver promote meadow persistence, and the significance of wet meadows as carbon sinks. We also present stratigraphic evidence demonstrating that incision, often triggered by anthropogenic activity or changing climate, is the primary mechanism of alluvial wet meadow degradation, resulting in water table decline and shifts in vegetation composition. Restoration requires reversing these incisional processes through techniques that elevate water tables, disperse flow and retain sediment—methods traditionally associated with either soil conservation or stream restoration. These include nature-based solutions that create obstructions such as beaver dams and their analogues, rock and wood-based obstructions and incision trench or gully filling and grading. Given their multifunctional value—including but not limited to flood attenuation, biodiversity support, and carbon sequestration—wet meadows warrant a focused restoration framework. This review advocates for a valley-floor scale restoration paradigm that integrates hydrological reconnection, sediment retention, and biological reinforcement to ensure long-term resilience of these systems in the face of changing climate and land use pressures.

Frontiers in Environmental Science↗

USGS2000

Method for estimating water use and interbasin transfers of freshwater and wastewater in an urbanized basin

Techniques for management of drainage basins that use water budgets to balance available water resources with actual or anticipated water use require accurate and precise estimates of basin withdrawals, interbasin transfers of freshwater, unaccounted-for use, water use, consumptive use, inflow and infiltration, basin return flow, and interbasin transfers of wastewater. Frequently, interbasin transfers of freshwater and wastewater are not included in basin water budgets because they occur within public water-delivery and wastewater-collection systems. A new 10-step method was developed to improve estimates of inflow and infiltration and interbasin transfers using readily available statewide data. The accuracy and precision of water-use estimates determined by this method are improved through careful application of coefficients for small users and the use of metered values for large users. The method was developed and tested with data for the Ten Mile River Basin in southeastern Massachusetts. This report uses examples from the basin to illustrate each step of the method.

Massachusetts↗

USGS2025

A scientific vision and roadmap for earthquake rupture forecast developments, a USGS perspective

We articulate a scientific vision and roadmap for the development of improved Earthquake Rupture Forecast models, which are one of the two main modeling components used in modern seismic hazard and risk analysis. One primary future objective is to provide fully time-dependent models that include both elastic rebound and spatiotemporal clustering nationwide, which is particularly important for shorter-term hazard and risk considerations (e.g., earthquake insurance products). We also discuss the importance and perennial challenges associated with quantifying epistemic uncertainties, including those associated with deformation-model slip rates, un-quantified sampling errors with respect to off-fault seismicity, and any spatial covariances. The need for more physics-based approaches is also emphasized, as is the benefit of adding model valuation (quantifying usefulness) to our verification and validation protocols. Given the multidisciplinary and system-level nature of this activity, modular design is critical. Future updates will also draw from best-available science by both the United States Geological Survey and the external community. The primary goal of this paper is to highlight plans that guide research and facilitate community engagement with model development, especially with respect to lowering the entry barrier for early career scientists and engineers. The paper is written so readers can focus on the sections that interest them most (see table of contents), with the Introduction and Discussion providing a stand-alone overview and summary.

Bulletin of the Seismological Society of America↗

USGS2024

Constraining the earthquake recording threshold of intraslab earthquakes with turbidites in southcentral Alaska’s lakes and fjords

Strong ground motion from intraslab earthquakes, which do not produce primary paleoseismic evidence, may initiate gravity-driven turbidity flows in subaqueous basins. The resulting deposits (turbidites) can provide a paleoseismic proxy if the conditions that initiate these flows are known. To better constrain the initiating conditions, we use two recent intraslab earthquakes in southcentral Alaska, the M w 7.1 30 November 2018 Anchorage earthquake and the M w 7.1 24 January 2016 Iniskin earthquake, as calibration events. Through a multilake investigation, we document the occurrence, or the absence, of earthquake-generated turbidity flows from these two events. Both earthquakes are recorded by centimeter-scale turbidites that can be differentiated from climatically generated deposits, as well as other seismic sources based on deposit thickness, sedimentological properties, and deposit age. We show that a Modified Mercalli Intensity (MMI) of ∼V–V1/2 is the minimum shaking intensity required to generate localized sediment remobilization from deltaic slopes, and an MMI of ∼V1/2 is required to produce a deposit of sufficient thickness that a seismic origin can be confidently assigned. The documentation of seismically generated deposits in quick succession (∼2 years) with diagnostic features highlights the utility of using recent earthquakes as calibration events to investigate the subaqueous response to strong ground motion.

Alaska↗

USGS2024

Cross-fade sampling: Extremely efficient Bayesian inversion for a variety of geophysical problems

This paper introduces cross-fade sampling, a computationally efficient Markov Chain Monte Carlo simulation method that uses a semi-analytical approach to quickly solve Bayesian inverse problems that do not themselves have an analytical solution. Cross-fading is efficient in two ways. First, it requires fewer samples to obtain the same quality simulation of the target probability density function (PDF). Secondly, it is much faster to evaluate the posterior probability of each sample than conventional sampling methods for simulating Bayesian posterior PDFs. Conventional methods require evaluating the prior probability (which describes your a priori constraints) and data likelihood (which describes the fit between the observations and the predictions of the model) for each sample model. However, cross-fading does not require evaluating the data likelihood, meaning that ‘big data’ can be fit with zero additional computational cost. Further, the cross-fading approach can be used to calculate the marginal likelihood associated with a model design, facilitating model comparison and Bayesian model averaging. Topics covered in this paper include derivation of the cross-fade approach and how it can be used to simulate Bayesian posterior PDFs and compute the marginal likelihood, discussion of the class of problems to which cross-fading can be applied (with examples from earthquake statistics, earthquake ground motion modelling, volcanic eruption forecasting, and finite fault slip modelling), demonstration of efficiency relative to existing sampling methods and discussion of how cross-fading can be used to account for prediction errors (i.e. epistemic errors) as part of the geophysical inverse problem.

Geophysical Journal International↗

USGS1976

Geotechnical description of four Mississippi Delta soil borings

The submerged portion of the Mississippi Delta complex forms an ideal natural laboratory to study the effects of rapid deposition. One of the most obvious of these effects is the mass movements of sediments. Slump and slide signatures, mudflow characteristics, and evidence for creep are all found in abundance on the delta platform. These types of features have been studied by Colemen and Wright (1974) with regard to form and by Garrison (1974) with regard to their spatial distribution. Assembling these authors' findings, it is clear that the entire offshore zone contiguous with the Mississippi River is a myriad of geological action. This situation is indeed stimulating to the sedimentologist, yet it represents a nightmare to the foundation engineer. Emplacing offshore structures in such an environment is a most difficult task, particularly since the high degree of local variability dictates that each case must be handled separately. It is under these circumstances that a marriage between geology and engineering is most fruitful, for determining the relationships between the sedimentological processes and the engineering properties is satisfying to parties from both disciplines. This, then, is the underlying objective of the Mississippi Delta research project. By investigating the instability in a geologic sense, it is hoped that many of the engineering problems will become more soluble and that extrapolation and prediction will become more realistic.

Mississippi Delta↗

USGS2025

40Ar/39Ar geochronology supporting mineral resources research at USGS Denver

The 40 Ar/ 39 Ar geochronology method is used to date potassium-bearing rocks and minerals, based on the decay of 40 K to 40 Ar, which provides important temporal constraints for geological events. The USGS Denver Argon Geochronology Laboratory dates samples from a variety of projects, mainly in the USGS Mineral Resource Program and the National Cooperative Geologic Mapping Program, facilitating in-depth research into the timing of geological events and processes. Recent applications of this method include geochronological studies in the Yellow Pine district, revealing mineralization ages that range from 51 to 70 Ma, and investigations into the Bear Lodge alkaline complex, providing insights into the timing of REE carbonatite formation. Additionally, studies at Alunite Ridge highlight the method's potential for understanding concealed mineral deposits. Ongoing projects continue to leverage 40 Ar/ 39 Ar data to enhance understanding of geologic frameworks and mineral resources, underpinning its importance in modern geochronology and mineral resource assessment.

Conference Paper↗

USGS1976

Transport and dispersion of fluorescent tracer particles for the dune-bed condition, Atrisco Feeder Canal near Bernalillo, New Mexico

A tracer technique in which mineral particles were coated with fluorescent dyes was used to study the rates of transport and dispersion of sediment particles`of various diameters and specific gravities for a dune-bed condition in an alluvial channel. The experiment was conducted in the Atrisco Feeder Canal near Bernalillo, N. Mex., between May 1 and July 14, 1967. A continuous point source of tracers, approximated by injections at 5- or 10-minute intervals, was maintained for 7 days so that the steady-dilution procedure could be used to calculate the transport rate of bed material. After termination of the injection process, the spatial-integration procedure was used to follow the movement of the tracers downstream and to calculate the transport rate. Samples of the bed material in transport and the accompanying tracers moving along the surface of the dune bed were obtained periodically throughout the study with the "dustpan" sampler especially designed for fluorescent tracer studies. In addition, the spatial distributions of the tracers in the dune bed were determined three times during the study by core sampling.

New Mexico↗

USGS2026

Detecting earthquakes in noisy real-time GNSS data with deep learning for improved PGD magnitude estimation

To disseminate accurate and useful warnings, earthquake early warning (EEW) systems must quickly determine the size and location of an earthquake to estimate expected shaking. Traditional seismic‐based algorithms tend to underestimate the true magnitudes of large earthquakes, a phenomenon known as magnitude saturation. This limitation motivated the recent inclusion of Global Navigation Satellite Systems (GNSS) data into the U.S. Geological Survey’s ShakeAlert EEW system with the Geodetic First Approximation of Size and Time (GFAST) algorithm because GNSS data do not saturate with large ground motions. However, the noise levels of GNSS data are very high compared with traditional seismic data, which obscures P ‐wave arrivals and can result in less accurate magnitude estimations if displacement amplitudes are low, such as for lower magnitude earthquakes or large source–station distances. In this study, we develop a deep‐learning model that detects earthquakes in GNSS data and use the Ridgecrest, California, earthquake sequence as a case study to demonstrate how the model could act as a filter to reduce the amount of low‐quality data that enters an algorithm like GFAST. To preserve our limited real earthquake data for model inference, we generated a training dataset composed of >700,000 synthetic displacement waveforms. We combined the synthetic waveforms with real‐time GNSS noise to produce realistically noisy training waveforms and then tested our model on additional synthetic data and performed inference using the real data that were held back. We discuss the performance of our trained model on both the unseen synthetic data and real inference data. Our model can be used to selectively filter only high‐quality data where an earthquake signal is observed for input into an algorithm like GFAST (outperforming a simple signal‐to‐noise ratio–based filter) to reduce the error in GFAST’s real‐time earthquake magnitude estimations.

California↗

USGS2025

Pre-eruptive characteristics of “suspect” silicic magmas in Carlin-type Au-forming systems

World-class Carlin-type Au deposits hosted in sedimentary rock were formed when profuse Eocene silicic magmatism swept across northern Nevada in response to arc migration. Carlin-type Au deposits formed along with porphyry/skarn Cu-Mo-W-Au deposits, epithermal Ag-Au deposits, and distal disseminated Ag-Au deposits. But unlike these other Au-bearing deposits that have clear associations with igneous intrusions, Carlin-type ore deposits appear to have formed distant from concealed plutons, and their origin remains controversial. Despite decades of abundant geophysical, geochronological, and geochemical studies suggesting the involvement of magmas, concrete evidence for magmatic involvement is still lacking. Consequently, the involvement of contemporaneous igneous systems remains inferred based on age, proximity, and variable isotopic, geochemical, and geophysical clues. A recent synthesis of deposit models postulates that Carlin-type Au deposits are intrusion-related, but that the causative magmas reside deeper (∼6–12 km) than in typical porphyry and peripheral systems (∼3–5 km), meaning that Carlin-type deposits are perhaps more distal expressions of igneous intrusions. We investigate a collection of “suspect” magmatic systems over a ∼7 m.y. timespan (∼41–34 Ma) that are contemporaneous with and near known Carlin-type ore deposits. We report results of a multifaceted array of in situ geochemical analyses (FTIR, EMP, SHRIMP-RG, LA-ICP-MS) of quartz-hosted melt inclusions, biotite, and quartz to better characterize the pre-eruptive characteristics of these magmas. We also report results of thermobarometry and thermodynamic phase equilibria modeling to help place constraints on magmatic reservoir depths and processes. Rather than a single “flavor” of silicic magma, we observe a surprisingly broad compositional spectrum of rhyolites, with one end of the spectrum exhibiting more arc-like (I-type) characteristics and the other end displaying more post-subduction, thick-crust extensional (A-type) characteristics. This broad compositional spectrum suggests a more complex picture of silicic crustal magmatism operating over a narrow span of time during slab rollback. Despite this spectrum, magmatic systems in this study are consistently ferroan and generally peraluminous, which we interpret as an expression of the relatively elevated geotherm at the time and incorporation of variable amounts of highly peraluminous metasedimentary crustal components. The silicic magma spectrum encompasses a range of mineralization associations, including subduction-related Cu-Mo-W-Au-Ag and post-subduction, thick-crust extensional rare-metal Mo-Sn-W-F-Be-Ag-Au, consistent with the prolific and diverse array of ore deposits that formed during this time. Carlin-type Au deposition appears to be associated with nearly the entire magmatic spectrum. This apparent indifference to silicic magma “flavor” would seem to imply that if magmas are involved in Carlin-type Au deposit genesis, they perhaps do not need to be compositionally specialized and/or possibly are only relevant as heat sources driving circulation to remobilize and redistribute metals.

Nevada↗

USGS2024

Complex landslide patterns explained by local intra-unit variability of stratigraphy and structure: Case study in the Tyee Formation, Oregon, USA

Lithology and geologic structure are important controls on landslide susceptibility and are incorporated into many regional landslide hazard models. Typically, metrics for mapped geologic units are used as model input variables and a single set of values for material strength are assumed, regardless of spatial heterogeneities that may exist within a map unit. Here we describe how differences in bedding thickness, grain size, inferred uniaxial compressive strength, and bedding dip control the inherent susceptibility of slopes to deep-seated failure within a single mapped geologic unit - the Tyee Formation of Oregon, USA. The Tyee, which covers over 15,000 km2 and underlies much of the Oregon Coast Range, comprises gently folded alternating beds of sandstone and siltstone deposited as turbidites, forming a 2-km thick Eocene submarine fan which has been uplifted and exhumed through the Cenozoic. Deep-seated landslides are widespread in the Tyee, but form a complex spatial pattern such that landslide density ranges from 0 to 24% of the total landscape area. These slides are often extensive and sufficiently deep to reduce local hillslope gradients, resulting in a strong negative correlation between landslide density and mean local slope. Mean annual precipitation and predicted strong ground motions from Cascadia earthquake scenarios also fail to explain the spatial distribution of deep-seated landslides. Consequently, landslide stability models, which are strongly influenced by landscape slope, pore-water pressure, and seismic acceleration, yield landslide susceptibility maps which are broadly anti-correlated with mapped deep-seated landslide density. Through a multivariable linear regression model, we show that much of the variance in deep-seated landslide density can be explained by variability of intra-unit stratigraphic and structural characteristics, which we measure at 128 sites across two study areas totaling ∼3000 km2. Our results suggest bedding dip is only weakly correlated to landslide density, but strongly influences landslide failure style. Subtle increases in bedding dip, even in the gently folded Tyee Formation, result in a substantially higher likelihood of a landslide being cataclinal, or parallel to bedding. Overall, we find a slight majority of landslides fail within these cataclinal slopes, and that these landslides tend to be larger than non-cataclinal landslides. We also show that the lithological and structural properties that influence landslide susceptibility are distinct for these two populations of landslides. Our results demonstrate how localized, intra-unit, geologic variability can exert strong control on landslide susceptibility and failure style. This suggests that in some locations, landslide hazard models could be significantly improved by incorporating detailed, spatially variable, geologic properties rather than relying solely on generalized geologic map units.

Oregon↗