USGS Science⌕ Search

SEARCH · USGS Science

Results for “Surface Water Techniques”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5Linked to original sources
USGS2011

Enhancement of USGS scientific investigations in Texas by using geophysical techniques, 2005-10

Geophysical techniques are an increasingly important tool for scientific investigations, environmental planning, and resource management. During 2005-10 the U.S. Geological Survey Texas Water Science Center greatly expanded its capabilities of using surface and borehole geophysical techniques to gain insights into how groundwater systems work and the occurrence and distribution of certain contaminants. Geophysical techniques provide a relatively quick and inexpensive means to characterize the subsurface hydrology and lithology.

Fact Sheet↗
USGS1978

Summary appraisals of the Nation's ground-water resources; Alaska

Alaska has enormous surface-water resources, but many of the streams are frozen for most of the year and most contain glacial silt that makes them unacceptable for human use. These factors lend special significance to ground water as a water-supply source, even though perennially frozen ground (permafrost) profoundly modifies ground-water flow systems in much of Alaska north of the maritime southern coast and southeastern panhandle areas. Frozen ground is a virtually impermeable layer that restricts recharge, discharge, and movement of ground water, acts as a confining layer and limits the volume of unconsolidated deposits and bedrock in which water may be stored. Ground water is an untested resource in most of Alaska, but in many areas potential development of ground water far exceeds current use. Alluvium of major river valleys, such as the Yukon, Tanana, Kuskokwim and Susitna Rivers, probably contains the most extensive aquifers in the State. Large amounts of ground water are also stored in glacial outwash aquifers that underlie coastal basins and valleys, such as those at Kenai and Anchorage in the Cook Inlet lowland. Individual wells yielding more than 1,000 gallons per minute have been developed in the Tanana River valley, Cook Inlet lowland, and the coastal valleys at Seward and Juneau. Comparable yields should be possible in other areas that have similar geohydrologic environments. No major aquifers have been identified in glacial and glaciolacustrine deposits of interior valleys or in deltaic deposits. Major bedrock aquifers have been identified only in carbonate rocks of the Brooks Range and on the north side of the Alaska Range. Springs issuing from the carbonate rocks of the Brooks Range have discharges as great as 16,000 gallons per minute. Most ground-water recharge occurs beneath reaches of stream channels that are losing flow to the ground-water system. Most ground-water discharge also takes place along reaches of stream channels. This discharge augments streamflows during summer and maintains low flows during winter when there is no surface-water runoff. On the basis of a streamflow hydrograph separation technique and using the 60 percent flow-duration value as an indicator of ground-water discharge, it is estimated that 25 percent of the total volume of streamflow in Alaska (exclusive of coastal, maritime environments) is contributed by ground-water discharge. The thawing of frozen ground in the permafrost regions of Alaska causes construction and engineering problems. Disturbance of the ground surface disrupts the natural thermal equilibrium and tends to thaw part of the permafrost. Thawing can cause loss of strength, a decrease in volume, and an increase in erosion potential, particularly if the frozen ground is fine grained and poorly drained. Present deficiencies in the ground-water information base are obvious limiting factors to ground-water development in Alaska. There is a need to extend the ground-water data-collection network and to pursue special research into the quantitative aspects of ground-water hydrology in cold regions, particularly the continuous permafrost zone.

Alaska↗
USGS2012

Demonstrating usefulness of real-time monitoring at streambank wells coupled with active streamgages - Pilot studies in Wyoming, Montana, and Mississippi

Groundwater and surface water in many cases are considered separate resources, but there is growing recognition of a need to treat them as a single resource. For example, groundwater inflow during low streamflow is vitally important to the health of a stream for many reasons, including buffering temperature, providing good quality water to the stream, and maintaining flow for aquatic organisms. The U.S. Geological Survey (USGS) has measured stream stage and flow at thousands of locations since 1889 and has the ability to distribute the information to the public within hours of collection, but collecting shallow groundwater data at co-located measuring sites is a new concept. Recently developed techniques using heat as a tracer to quantify groundwater and surface-water exchanges have shown the value of coupling these resources to increase the understanding of the water resources of an area. In 2009, the USGS Office of Groundwater began a pilot study to examine the feasibility and utility of widespread use of real-time groundwater monitoring at streambank wells coupled with real-time surface-water monitoring at active streamgages to assist in understanding the exchange of groundwater and surface water in a cost effective manner.

Mississippi;Montana;Wyoming↗
USGS2009

First-order exchange coefficient coupling for simulating surface water-groundwater interactions: Parameter sensitivity and consistency with a physics-based approach

Distributed hydrologic models capable of simulating fully-coupled surface water and groundwater flow are increasingly used to examine problems in the hydrologic sciences. Several techniques are currently available to couple the surface and subsurface; the two most frequently employed approaches are first-order exchange coefficients (a.k.a., the surface conductance method) and enforced continuity of pressure and flux at the surface-subsurface boundary condition. The effort reported here examines the parameter sensitivity of simulated hydrologic response for the first-order exchange coefficients at a well-characterized field site using the fully coupled Integrated Hydrology Model (InHM). This investigation demonstrates that the first-order exchange coefficients can be selected such that the simulated hydrologic response is insensitive to the parameter choice, while simulation time is considerably reduced. Alternatively, the ability to choose a first-order exchange coefficient that intentionally decouples the surface and subsurface facilitates concept-development simulations to examine real-world situations where the surface-subsurface exchange is impaired. While the parameters comprising the first-order exchange coefficient cannot be directly estimated or measured, the insensitivity of the simulated flow system to these parameters (when chosen appropriately) combined with the ability to mimic actual physical processes suggests that the first-order exchange coefficient approach can be consistent with a physics-based framework. Copyright ?? 2009 John Wiley & Sons, Ltd.

Hydrological Processes↗
USGS2026

Estimating the importance of floating surface material to the total phosphorus transport in Silver Creek, Wisconsin using Particle Image Velocimetry

Various techniques are used to estimate nutrient delivery in streams that combine flow and water-quality data. However, the transport of surface floating material is difficult to measure, and is therefore typically neglected when stream sampling and in the estimated nutrient delivery. Here, we describe an approach to estimate the amount of material (duckweed ( Lemna genus), filamentous algae, and other macrophyte fragments) and associated nutrients (in this case, phosphorus, P) transported on the surface of Silver Creek, Wisconsin, to determine if this material is an important transport mechanism and if historical P loads were underestimated. This approach includes estimating the transport of surface material using 10 s videos collected every 15 min from a downward-looking camera installed beneath a bridge. The average velocity of the surface material was first determined using Large-Scale Particle Image Velocimetry (LSPIV), which uses short videos to analyze surface particle movement. The amount of surface material in each video was then computed using computer-vision techniques. The P load associated with the transported surface material was then estimated by combining surface velocities, coverage of floating material, and laboratory-measured P content. Surface material transported ~9–11% of the total summer P load and ~4–7% of the annual load in Silver Creek.

Wisconsin↗
USGS2012

Using computational modeling of river flow with remotely sensed data to infer channel bathymetry

As part of an ongoing investigation into the use of computational river flow and morphodynamic models for the purpose of correcting and extending remotely sensed river datasets, a simple method for inferring channel bathymetry is developed and discussed. The method is based on an inversion of the equations expressing conservation of mass and momentum to develop equations that can be solved for depth given known values of vertically-averaged velocity and water-surface elevation. The ultimate goal of this work is to combine imperfect remotely sensed data on river planform, water-surface elevation and water-surface velocity in order to estimate depth and other physical parameters of river channels. In this paper, the technique is examined using synthetic data sets that are developed directly from the application of forward two-and three-dimensional flow models. These data sets are constrained to satisfy conservation of mass and momentum, unlike typical remotely sensed field data sets. This provides a better understanding of the process and also allows assessment of how simple inaccuracies in remotely sensed estimates might propagate into depth estimates. The technique is applied to three simple cases: First, depth is extracted from a synthetic dataset of vertically averaged velocity and water-surface elevation; second, depth is extracted from the same data set but with a normally-distributed random error added to the water-surface elevation; third, depth is extracted from a synthetic data set for the same river reach using computed water-surface velocities (in place of depth-integrated values) and water-surface elevations. In each case, the extracted depths are compared to the actual measured depths used to construct the synthetic data sets (with two- and three-dimensional flow models). Errors in water-surface elevation and velocity that are very small degrade depth estimates and cannot be recovered. Errors in depth estimates associated with assuming water-surface velocities equal to depth-integrated velocities are substantial, but can be reduced with simple corrections.

Conference Paper↗
USGS2014

An intercomparison of three methods for the large-scale isolation of oceanic dissolved organic matter

Dissolved organic matter (DOM) was isolated from large volumes of deep (674 m) and surface (21 m) ocean water via reverse osmosis/electrodialysis (RO/ED) and two solid-phase extraction (SPE) methods (XAD-8/4 and PPL) at the Natural Energy Laboratory of Hawaii Authority (NELHA). By applying the three methods to common water samples, the efficiencies of XAD, PPL and RO/ED DOM isolation were compared. XAD recovered 42% of dissolved organic carbon (DOC) from deep water (25% with XAD-8; 17% with XAD-4) and 30% from surface water (16% with XAD-8; 14% with XAD-4). PPL recovered 61 ± 3% of DOC from deep water and 61% from surface water. RO/ED recovered 82 ± 3% of DOC from deep water, 14 ± 3% of which was recovered in a sodium hydroxide rinse, and 75 ± 5% of DOC from surface water, with 12 ± 2% in the sodium hydroxide rinse. The highest recoveries of all were achieved by the sequential isolation of DOC, first with PPL and then via RO/ED. This combined technique recovered 98% of DOC from a deep water sample and 101% of DOC from a surface water sample. In total, 1.9, 10.3 and 1.6 g-C of DOC were collected via XAD, PPL and RO/ED, respectively. Rates of DOC recovery using the XAD, PPL and RO/ED methods were 10, 33 and 10 mg-C h − 1 , respectively. Based upon C/N ratios, XAD isolates were heavily C-enriched compared with water column DOM, whereas RO/ED and PPL ➔ RO/ED isolate C/N values were most representative of the original DOM. All techniques are suitable for the isolation of large amounts of DOM with purities suitable for most advanced analytical techniques. Coupling PPL and RO/ED techniques may provide substantial progress in the search for a method to quantitatively isolate oceanic DOC, bringing the entirety of the DOM pool within the marine chemist's analytical window.

Marine Chemistry↗
USGS2003

Aquifer Susceptibility in Virginia: Data on Chemical and Isotopic Composition, Recharge Temperature, and Apparent Age of Water from Wells and Springs, 1998-2000

The determination of aquifer susceptibility to contamination from near-surface sources by the use of ground-water dating techniques is a critical part of Virginia's Source Water Assessment Program. As part of the Virginia Aquifer Susceptibility study, water samples were collected between 1998 and 2000 from 145 wells and 6 springs in various hydrogeologic settings across the Commonwealth. Samples were analyzed to determine water chemistry?including nitrate (NO3), dissolved organic carbon (DOC), and radon-222 (222Rn), major dissolved and noble gases?nitrogen (N2), argon (Ar), oxygen (O2), carbon dioxide (CO2), methane (CH4), helium (He), and neon (Ne), environmental tracers?chlorofluorocarbons (CFCs), sulfur hexafluoride (SF6), tritium (3H), and tritium/helium-3 (3H/3He), carbon isotopes?carbon-14 (14C) and carbon-13 (d13C), and stable isotopes of oxygen (d18O) and hydrogen (d2H). The chemical and isotopic composition, recharge temperatures, and apparent ages of these water samples are presented in this report. Data collected between 1999 and 2000 from 18 wells in Virginia as part of two other studies by the U.S. Geological Survey also are presented. Most of the sites sampled serve as public water supplies and are included in the comprehensive Source Water Assessment Program for the Commonwealth.

Open-File Report↗
USGS2002

Determination of methyl mercury by aqueous phase ethylation, followed by gas chromatographic separation with cold vapor atomic fluorescence detection

A recent national sampling of streams in the United States revealed low methyl mercury concentrations in surface waters. The resulting median and mean concentrations, calculated from 104 samples, were 0.06 nanograms per liter (ng/L) and 0.15 ng/L, respectively. This level of methyl mercury in surface water in the United States has created a need for analytical techniques capable of detecting sub-nanogram per liter concentrations. In an attempt to create a U.S. Geological Survey approved method, the Wisconsin District Mercury Laboratory has adapted a distillation/ethylation/ gas-phase separation method with cold vapor atomic fluorescence spectroscopy detection for the determination of methyl mercury in filtered and unfiltered waters. This method is described in this report. Based on multiple analyses of surface water and ground-water samples, a method detection limit of 0.04 ng/L was established. Precision and accuracy were evaluated for the method using both spiked and unspiked ground-water and surface-water samples. The percent relative standard deviations ranged from 10.2 to 15.6 for all analyses at all concentrations. Average recoveries obtained for the spiked matrices ranged from 88.8 to 117 percent. The precision and accuracy ranges are within the acceptable method-performance limits. Considering the demonstrated detection limit, precision, and accuracy, the method is an effective means to quantify methyl mercury in waters at or below environmentally relevant concentrations

Open-File Report↗
USGS2004

Determination of the relative uptake of ground vs. surface water by Populus deltoides during phytoremediation

The use of plants to remediate polluted groundwater is becoming an attractive alternative to more expensive traditional techniques. In order to adequately assess the effectiveness of the phytoremediation treatment, a clear understanding of water-use habits by the selected plant species is essential. We examined the relative uptake of surface water (i.e., precipitation) vs. groundwater by mature Populus deltoides by applying irrigation water at a rate equivalent to a 5-cm rain event. We used stable isotopes of hydrogen (D) and oxygen (18O) to identify groundwater and surface water (irrigation water) in the xylem sap water. Pretreatment isotopic ratios of both deuterium and 18O, ranked from heaviest to lightest, were irrigation water > groundwater > xylem sap. The discrepancy in preirrigation isotopic signatures between groundwater and xylem sap suggests that in the absence of a surface source of water (i.e., between rain events) there is an unknown amount of water being extracted from sources other than groundwater (i.e., soil surface water). We examined changes in volumetric soil water content (%), total hourly sapflux rates, and trichloroethene (TCE) concentrations. Following the irrigation treatment, volumetric soil water increased by 86% and sapflux increased by as much as 61%. Isotopic signatures of the xylem sap became substantially heavier following irrigation, suggesting that the applied irrigation water was quickly taken up by the plants. TCE concentrations in the xylem sap were diluted by an average of 21% following irrigation; however, dilution was low relative to the increase in sapflux. Our results show that water use by Populus deltoides is variable. Hence, studies addressing phytoremediation effectiveness must account for the relative proportion of surface vs. groundwater uptake.

International Journal of Phytoremediation↗
USGS2009

A shallow subsurface controlled release facility in Bozeman, Montana, USA, for testing near surface CO2 detection techniques and transport models

A controlled field pilot has been developed in Bozeman, Montana, USA, to study near surface CO2 transport and detection technologies. A slotted horizontal well divided into six zones was installed in the shallow subsurface. The scale and CO2 release rates were chosen to be relevant to developing monitoring strategies for geological carbon storage. The field site was characterized before injection, and CO2 transport and concentrations in saturated soil and the vadose zone were modeled. Controlled releases of CO2 from the horizontal well were performed in the summers of 2007 and 2008, and collaborators from six national labs, three universities, and the U.S. Geological Survey investigated movement of CO2 through the soil, water, plants, and air with a wide range of near surface detection techniques. An overview of these results will be presented.

Montana↗
USGS2021

Characterization of groundwater quality and discharge with emphasis on selenium in an irrigated agricultural drainage near Delta, Colorado, 2017–19

Selenium is a water-quality constituent of concern for aquatic ecosystems in the lower Gunnison River Basin. Selenium is derived from bedrock of the Mancos Shale and is mobilized and transported to groundwater and surface water by application of irrigation water. Although it is recognized that groundwater contributes an appreciable amount of selenium to surface water, few studies have addressed interactions between the two. The U.S. Geological Survey in cooperation with the Colorado Water Conservation Board conducted a study during 2017–19 to characterize the quality and quantity of groundwater discharging to an agricultural drainage near Delta, Colorado, locally known as Sunflower Drain. Water quality in the study area is characterized by high dissolved solids with elevated concentrations of selenium and nitrate resulting from dissolution of soluble salts in the Mancos Shale. Selenium concentrations have decreased by 50 percent since the early 2000s, possibly in response to irrigation system improvements. Stable water isotopes indicate streamflow is dominated by canal water during the irrigation season (April to October) and, during the nonirrigation season (November to March), is dominated by groundwater that has undergone some degree of evaporation. Pesticide and pharmaceutical compounds were infrequently detected, and results indicate they were derived from sources outside the study area such that they do not appear to be useful as tracers of groundwater sources. Stable isotopes of nitrate indicate that nitrate originates from the Mancos Shale, and the isotopic composition is enriched by denitrification in the groundwater system. Using a mass-balance approach, estimated groundwater discharge rates to Sunflower Drain ranged from 0.15 to 0.27 cubic feet per second per mile with one losing reach identified. Selenium, sulfate, and nitrate concentrations in groundwater estimated by mass-balance calculations were similar to concentrations measured in the Poly 17 observation well, located in a largely irrigated area in east tributary. One tributary reach had higher concentrations of selenium, sulfate, and nitrate likely reflecting localized inputs of more concentrated groundwater, similar to the concentrations in the Poly 7 observation well, which is downgradient from a residential area in the west tributary. Three pilot studies were conducted, including fiber optic distributed temperature sensing to detect groundwater discharge zones in the stream channel, a passive seismic technique to estimate depth to bedrock, and use of radon-222 as a geochemical tracer of groundwater discharge. All three techniques show promise as additional approaches for investigating groundwater discharge surface-water systems in irrigated drainage areas on Mancos Shale. The factors that affect groundwater movement mainly include when and where irrigation water is transported and applied, and the distribution of bedrock of the Mancos Shale and overlying alluvial deposits. The average groundwater recharge rate for the study area was estimated at 8.1 inches per year, based on mass balance calculations from synoptic survey data. Along the western tributary of Sunflower Drain, there was evidence that spills from the East Canal may recharge the groundwater aquifer adjacent to the stream channel. Groundwater movement to the stream channel may be controlled by the topography of the alluvial/bedrock interface or focused along human-made features, such as tile drains and ditches constructed around irrigated fields. On larger scales, the top of bedrock was also important, creating a topographic constriction that caused a zone of groundwater discharge. The groundwater system is complex, and further study could better define the system, possibly through application of a groundwater flow model and more extensive studies using some of the exploratory methods evaluated in this study.

Colorado↗
USGS2010

Effects of including surface depressions in the application of the Precipitation-Runoff Modeling System in the Upper Flint River Basin, Georgia

This report documents an extension of the Precipitation Runoff Modeling System that accounts for the effect of a large number of water-holding depressions in the land surface on the hydrologic response of a basin. Several techniques for developing the inputs needed by this extension also are presented. These techniques include the delineation of the surface depressions, the generation of volume estimates for the surface depressions, and the derivation of model parameters required to describe these surface depressions. This extension is valuable for applications in basins where surface depressions are too small or numerous to conveniently model as discrete spatial units, but where the aggregated storage capacity of these units is large enough to have a substantial effect on streamflow. In addition, this report documents several new model concepts that were evaluated in conjunction with the depression storage functionality, including: ?hydrologically effective? imperviousness, rates of hydraulic conductivity, and daily streamflow routing. All of these techniques are demonstrated as part of an application in the Upper Flint River Basin, Georgia. Simulated solar radiation, potential evapotranspiration, and water balances match observations well, with small errors for the first two simulated data in June and August because of differences in temperatures from the calibration and evaluation periods for those months. Daily runoff simulations show increasing accuracy with streamflow and a good fit overall. Including surface depression storage in the model has the effect of decreasing daily streamflow for all but the lowest flow values. The report discusses the choices and resultant effects involved in delineating and parameterizing these features. The remaining enhancements to the model and its application provide a more realistic description of basin geography and hydrology that serve to constrain the calibration process to more physically realistic parameter values.

Georgia↗
USGS2009

Radionuclides as tracers and timers in surface and groundwater

Environmental radionuclides—in combination with stable isotopes, geochemistry, and other hydrological techniques—provide a powerful tool, often indispensable, for studying the cycling of water in continental hydrological systems. The use of environmental radionuclides in surface water studies is reviewed in the chapter. The chapter also briefly discusses groundwater and geothermal water taking into consideration the fact that most applications in groundwater and geothermal water studies require the combined use of radioactive and stable isotopes. There are several sources of radionuclides in the environment, and the sources control the ways in which isotopes can be applied to hydrologic systems. Another group of radionuclides that can be utilized are those produced by cosmic-ray spallationin the atmosphere or near-surface lithosphere. Many of these nuclides, such as carbon-14 ( 14 C) and tritium ( 3 H), are also produced by nuclear weapons testing, and it is necessary to separate the two source functions when using them.

Book chapter↗
USGS2002

Water budget for and nitrogen loads to Northeast Creek, Bar Harbor, Maine

The potential for nutrient enrichment to coastal estuaries on Mt. Desert Island, Maine, may affect the health of these important ecosystems at Acadia National Park. Inputs of water and nitrogen entering one of these coastal estuaries, Northeast Creek, and adjacent wetlands on Mt. Desert Island were quantified in a recent study conducted by the U.S. Geological Survey, in cooperation with the National Park Service. Streamflow and concentra-tions of nitrogen species in the four perennial streams entering the wetland/estuary system were measured monthly for 18 months to estimate loads and develop a water budget. Old Mill Brook was instrumented with a continuous-recording stream-flow gage; the MOVE.1 record-extension technique was used with this and several other nearby continuous gages to estimate daily surface-water inflow to the wetland. Inflow from ungaged basins was estimated from the unit-area yield calculated from data obtained from the gaged basins. Precipitation data collected at the National Atmospheric Deposition Program (NADP) site at Acadia National Park Headquarters and the Acadia National Park weather station were used to calculate atmospheric inputs. Evapotranspiration from the wetland was calculated using Fennessey and Vogel?s regionalized multivariate regression model of Penman-Montieth evapotranspiration. Geologic data collected in the field and taken from published geologic maps indicate that ground water probably does not contribute significantly to the water budget of this wetland system. Surface-water outflow from the wetland was not calculated because of the tidal nature of the outlet of the wetland and the difficulties associated with measuring flow in a tidal stream.

Water-Resources Investigations Report↗
USGS2013

A regional classification of the effectiveness of depressional wetlands at mitigating nitrogen transport to surface waters in the Northern Atlantic Coastal Plain

Nitrogen from nonpoint sources contributes to eutrophication, hypoxia, and related ecological degradation in Atlantic Coastal Plain streams and adjacent coastal estuaries such as Chesapeake Bay and Pamlico Sound. Although denitrification in depressional (non-riparian) wetlands common to the Coastal Plain can be a significant landscape sink for nitrogen, the effectiveness of individual wetlands at removing nitrogen varies substantially due to varying hydrogeologic, geochemical, and other landscape conditions, which are often poorly or inconsistently mapped over large areas. A geographic model describing the spatial variability in the likely effectiveness of depressional wetlands in watershed uplands at mitigating nitrogen transport from nonpoint sources to surface waters was constructed for the Northern Atlantic Coastal Plain (NACP), from North Carolina through New Jersey. Geographic and statistical techniques were used to develop the model. Available medium-resolution (1:100,000-scale) stream hydrography was used to define 33,799 individual watershed catchments in the study area. Sixteen landscape metrics relevant to the occurrence of depressional wetlands and their effectiveness as nitrogen sinks were defined for each catchment, based primarily on available topographic and soils data. Cluster analysis was used to aggregate the 33,799 catchments into eight wetland landscape regions (WLRs) based on the value of three principal components computed for the 16 original landscape metrics. Significant differences in topography, soil, and land cover among the eight WLRs demonstrate the effectiveness of the clustering technique. Results were used to interpret the relative likelihood of depressional wetlands in each WLR and their likely effectiveness at mitigating nitrogen transport from upland source areas to surface waters. The potential effectiveness of depressional wetlands at mitigating nitrogen transport varies substantially over different parts of the NACP. Depressional wetlands are common in three WLRs covering 32 percent of the area, and have a relatively high potential to mitigate nitrogen transport from nonpoint sources. Conversely, 37 percent of the study area includes rolling hills with relatively high slope and relief, and little likelihood of depressional wetlands. The remainder of the Coastal Plain includes relatively flat watersheds with moderate to low relative likelihood of nitrogen mitigation. The delineation of WLRs in this model should be useful for targeting wetland conservation or restoration efforts, and for estimating the effects of depressional wetlands on the regional nitrogen budget, but should be considered in light of limitations and assumptions inherent in the model.

Scientific Investigations Report↗
USGS2004

Guidelines for surveying bankfull channel geometry and developing regional hydraulic-geometry relations for streams of New York State

Many disturbed streams within New York State are being restored in an effort to provide bank and bed stability and thereby decrease sedimentation and erosion. Efforts to identify and provide accurate indicators for stable-channel characteristics for ungaged streams have been hampered by the lack of regional equations or relations that relate drainage area to bankfull discharge and to channel depth, width, and cross-sectional area (bankfull hydraulic-geometry relations). Regional equations are needed to confirm bankfull hydraulic-geometry, assess stream stability, evaluate restoration needs, and verify restoration design for ungaged streams that lack stage-to-discharge ratings or historic peak-flow records. This report presents guidelines for surveying bankfull channel geometry at USGS stream gages and developing regional hydraulic-geometry relations (equations) for wadeable streams in New York. It summarizes methods to (1) compile and assess existing hydrologic, geometric, photographic, and topographic data, (2) conduct stream-reconnaissance inspections, (3) identify channel-bankfull characteristics, (4) conduct longitudinal and cross-section surveys, (5) measure stream discharge, (6) develop and refine bankfull hydraulic-geometry equations, and (7) analyze and assure data completeness and quality. The techniques primarily address wadeable streams with either active or discontinued surface-water and crest-stage gages. The relations can be applied to ungaged or actively gaged streams that are wadeable, and may be extended to non-wadeable streams (with some limitations) if they have drainage areas comparable to those used to develop the relations.

Open-File Report↗
USGS1999

Integrating surface and borehole geophysics in ground water studies: An example using electromagnetic soundings in south Florida

Time domain surface electromagnetic soundings, borehole induction logs, and other borehole logging techniques are used to construct a realistic model for the shallow subsurface hydraulic properties of unconsolidated sediments in south Florida. Induction logs are used to calibrate surface induction soundings in units of pore water salinity by correlating water sample specific electrical conductivity with the electrical conductivity of the formation over the sampled interval for a two‐layered aquifer model. Geophysical logs are also used to show that a constant conductivity layer model is appropriate for the south Florida study. Several physically independent log measurements are used to quantify the dependence of formation electrical conductivity on such parameters as salinity, permeability, and clay mineral fraction. The combined interpretation of electromagnetic soundings and induction logs was verified by logging three validation boreholes, confirming quantitative estimates of formation conductivity and thickness in the upper model layer, and qualitative estimates of conductivity in the lower model layer.

Journal of Environmental & Engineering Geophysics↗