USGS Science⌕ Search

SEARCH · USGS Science

Results for “Physical Chemistry Chemical Physics”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5Linked to original sources
USGS1988

Field and laboratory data describing physical and chemical characteristics of metal-contaminated flood-plain deposits downstream from Lead, west-central South Dakota

Samples from metal-contaminated flood-plain sediments at 9 sites downstream from Lead, in west-central South Dakota, were collected during the summers of 1985-87 to characterize aspects of the sedimentology, chemistry, and geometry of a deposit that resulted from the discharge of a large volume of mining wastes into a river system. Field and laboratory data include stratigraphic descriptions, chemical contents and grain-size distributions of samples, and surveyed flood-plain positions of samples. This report describes sampling-site locations, and methods of sample collection and preservation, and subsequent laboratory analysis. Field and laboratory data are presented in 4 figures and 11 tables in the ' Supplemental Data ' section at the back of the report. (USGS)

Open-File Report↗
USGS2012

Quality of streams in Johnson County, Kansas, 2002--10

Stream quality in Johnson County, northeastern Kansas, was assessed on the basis of land use, hydrology, stream-water and streambed-sediment chemistry, riparian and in-stream habitat, and periphyton and macroinvertebrate community data collected from 22 sites during 2002 through 2010. Stream conditions at the end of the study period are evaluated and compared to previous years, stream biological communities and physical and chemical conditions are characterized, streams are described relative to Kansas Department of Health and Environment impairment categories and water-quality standards, and environmental factors that most strongly correlate with biological stream quality are evaluated. The information is useful for improving water-quality management programs, documenting changing conditions with time, and evaluating compliance with water-quality standards, total maximum daily loads (TMDLs), National Pollutant Discharge Elimination System (NPDES) permit conditions, and other established guidelines and goals. Constituent concentrations in water during base flow varied across the study area and 2010 conditions were not markedly different from those measured in 2003, 2004, and 2007. Generally the highest specific conductance and concentrations of dissolved solids and major ions in water occurred at urban sites except the upstream Cedar Creek site, which is rural and has a large area of commercial and industrial land less than 1 mile upstream on both sides of the creek. The highest base-flow nutrient concentrations in water occurred downstream from wastewater treatment facilities. Water chemistry data represent base-flow conditions only, and do not show the variability in concentrations that occurs during stormwater runoff. Constituent concentrations in streambed sediment also varied across the study area and some notable changes occurred from previously collected data. High organic carbon and nutrient concentrations at the rural Big Bull Creek site in 2003 decreased to at least one-fourth of those concentrations in 2007 and 2010 likely because of the reduction in upstream wastewater discharge contributions. The highest concentrations of trace metals in 2010 occurred at urban sites on Mill and Indian Creeks. Zinc was the only metal to exceed the probable effects concentration in 2010, which occurred at a site on Indian Creek. In 2007, chromium and nickel at the upstream urban Cedar Creek site exceeded the probable effects concentrations, and in 2003, no metals exceeded the probable effects concentrations. Of 72 organic compounds analyzed in streambed sediment, 26 were detected including pesticides, polycyclic aromatic hydrocarbons (PAHs), fuel products, fragrances, preservatives, plasticizers, manufacturing byproducts, flame retardants, and disinfectants. All 6 PAH compounds analyzed were detected, and the probable effects concentrations for 4 of the 6 PAH compounds analyzed were exceeded in 2010. Only five pesticide compounds were detected in streambed sediment, including carbazole and four pyrethroid compounds. Chronic toxicity guidelines for pyrethroid compounds were exceeded at five sites. Biological conditions reflected a gradient in urban land use, with the less disturbed streams located in rural areas of Johnson County. About 19 percent of sites in 2010 (four sites) were fully supporting of aquatic life on the basis of the four metrics used by Kansas Department of Health and Environment to categorize sites. This is a notable difference compared to previous years when no sites (in 2003 and 2004) or just one site (in 2007) was fully supporting of aquatic life. Multimetric macroinvertebrate scores improved at the Big Bull Creek site where wastewater discharges were reduced in 2007. Environmental variables that consistently were highly negatively correlated with biological conditions were percent impervious surface and percent urban land use. In addition, density of stormwater outfall points adjacent to streams was significantly negatively correlated with biological conditions. Specific conductance of water and sum of PAH concentrations in streambed sediment also were significantly negatively correlated with biological conditions. Total nitrogen in water and total phosphorus in streambed sediment were correlated with most of the invertebrate variables, which is a notable difference from previous analyses using smaller datasets, in which nutrient relations were weak or not detected. The most important habitat variables were sinuosity, length and continuity of natural buffers, riffle substrate embeddedness, and substrate cover diversity, each of which was correlated with all invertebrate metrics including a 10-metric combined score. Correlation analysis indicated that if riparian and in-stream habitat conditions improve then so might invertebrate communities and stream biological quality. Sixty-two percent of the variance in macroinvertebrate community metrics was explained by the single environmental factor, percent impervious surface. Invertebrate responses to urbanization in Johnson County indicated linearity rather than identifiable thresholds. Multiple linear regression models developed for each of the four macroinvertebrate metrics used to determine aquatic-life-support status indicated that percent impervious surface, as a measure of urban land use, explained 34 to 67 percent of the variability in biological communities. Results indicate that although multiple factors are correlated with stream quality degradation, general urbanization, as indicated by impervious surface area or urban land use, consistently is determined to be the fundamental factor causing change in stream quality. Effects of urbanization on Johnson County streams are similar to effects described in national studies that assess effects of urbanization on stream health. Individually important environmental factors such as specific conductance of water, PAHs in streambed sediment, and stream buffer conditions, are affected by urbanization and, collectively, all contribute to stream impairments. Policies and management practices that may be most important in protecting the health of streams in Johnson County are those minimizing the effects of impervious surface, protecting stream corridors, and decreasing the loads of sediment, nutrients, and toxic chemicals that directly enter streams through stormwater runoff and discharges.

Kansas↗
USGS1999

A hydrometric and geochemical approach to test the transmissivity feedback hypothesis during snowmelt

To test the transmissivity feedback hypothesis of runoff generation, surface and subsurface waters were monitored and sampled during the 1996 snowmelt at various topographic positions in a 41 ha forested headwater catchment at Sleepers River, Vermont. Two conditions that promote transmissivity feedback existed in the catchment during the melt period. First, saturated hydraulic conductivity increased toward land surface, from a geometric mean of 3.6 mm h-1 in glacial till to 25.6 mm h-1 in deep soil to 54.0 mm h-1 in shallow soil. Second, groundwater levels rose to within 0.3 m of land surface at all riparian sites and most hillslope sites at peak melt. The importance of transmissivity feedback to streamflow generation was tested at the catchment scale by examination of physical and chemical patterns of groundwater in near-stream (discharge) and hillslope (recharge/lateral flow) zones, and within a geomorphic hollow (convergent flow). The presence of transmissivity feedback was supported by the abrupt increase in streamflow as the water table rose into the surficial, transmissive zone; a flattening of the groundwater level vs. streamflow curve occurred at most sites. This relation had a clockwise hysteresis (higher groundwater level for given discharge on rising limb than at same discharge on falling limb) at riparian sites, suggesting that the riparian zone was the dominant source area during the rising limb of the melt hydrograph. Hysteresis was counterclockwise at hillslope sites, suggesting that hillslope drainage controlled the snowmelt recession. End member mixing analysis using Ca, Mg, Na, dissolved organic carbon (DOC), and Si showed that stream chemistry could be explained as a two-component mixture of groundwater high in base cations and an O-horizon/overland flow water high in DOC. The dominance of shallow flow paths during events was indicated by the high positive correlation of DOC with streamflow (r2 = 0.82). Despite the occurrence of transmissivity feedback, hillslope till and soil water were ruled out as end members primarily because their distinctive high-Si composition had little or no effect on streamwater composition. Till water from the geomorphic hollow had a chemistry very close to streamwater base flow, and may represent the base flow end member better than the more concentrated riparian groundwater. During snowmelt, streamwater composition shifted as this base flow was diluted - not by shallow groundwater from the hillslope, but rather by a more surficial O-horizon/overland flow water.Surface and subsurface waters were analyzed to test the transmissivity feedback of runoff generation during the 1996 snowmelt in a catchment at Sleepers River, Vermont. The importance of transmissivity feedback to stream flow generation was tested by examination of physical and chemical patterns of groundwater in near-stream and hillslope zones within a geomorphic hollow. End member mixing analysis of Ca, Mg, Na, dissolved organic carbon (DOC), and Si showed that stream chemistry could be explained as a two-component mixture of groundwater high in base cations and an O-horizon/overland flow water high in DOC. The dominance of shallow water paths during the events was indicated by the high positive correlation of DOC with streamflow (r2 = 0.82).

Journal of Hydrology↗
USGS2008

Long-term change in limnology and invertebrates in Alaskan boreal wetlands

Climate change is more pronounced at high northern latitudes, and may be affecting the physical, chemical, and biological attributes of the abundant wetlands in boreal forests. On the Yukon Flats, located in the boreal forest of northeast Alaska, wetlands originally sampled during 1985-1989 were re-sampled for water chemistry and macroinvertebrates in summer 2001-2003. Wetlands sampled lost on average 19% surface water area between these periods. Total nitrogen and most metal cations (Na, Mg, and Ca, but not K) increased between these periods, whereas total phosphorus and chlorophyll a (Chl a) declined. These changes were greater in wetlands that had experienced more drying (decreased surface area). Compared with 1985-1989, densities of cladocerans, copepods, and ostracods in both June and August were much higher in 2002-2003, whereas densities of amphipods, gastropods, and chironomid larvae were generally lower. In comparisons among wetlands in 2002-2003 only, amphipod biomass was lower in wetlands with lower Chl a, which might help explain the decline of amphipods since the late 1980s when Chl a was higher. The decline in Chl a corresponded to greatly increased zooplankton density in June, suggesting a shift in carbon flow from scrapers and deposit-feeders to water-column grazers. Declines in benthic and epibenthic deposit-feeding invertebrates suggest important food web effects of climate change in otherwise pristine wetlands of the boreal forest. ?? 2008 Springer Science+Business Media B.V.

Hydrobiologia↗
USGS2021

Soils and paleosols

Soils are naturally occurring bodies that form in the interface between the geosphere, biosphere, hydrosphere , and atmosphere. They are the medium for much of the Earth's plant and animal growth. Soil morphology and how it evolves are functions of the soil-forming factors of climate, organisms, relief, parent material, and time. The expression of soil morphology takes the form of layers, called horizons, that differ in their color, particle size distribution, structure, chemistry, and organic matter content from the parent material. A fundamental soil mapping unit in the USA is the soil order and 12 soil orders have been defined on the basis of soil morphology, physical and chemical properties, and climate. Soil geography in the USA is explained by an examination of how these 12 soil orders are found in particular climates, under specific vegetation communities, how they develop from compositionally distinct parent materials, or how they are a result of the age of soil parent material. Paleosols are ancient soils, those that formed in the past. Three types of paleosols are recognized, buried soils (those covered by a younger sediment or rock), exhumed paleosols (formerly buried soils that are now exposed at the surface due to erosion of overlying materials), and relict paleosols (soils that occur at the land surface, but which formed in an environment, such as a climate or biome, very different from that at the present time). Paleosols can help define geologic contacts and can aid in elucidating past climates or vegetation regimes. Although there are rich geologic records of paleosols in the Quaternary, there is an increasing recognition of the importance of all these features in the longer, pre-Quaternary geologic record.

Book chapter↗
USGS1992

Rare earth, major and trace element composition of Leg 127 sediments

The relative effects of paleoceanographic and paleogeographic variations, sediment lithology, and diagenetic processes on the final preserved chemistry of Japan Sea sediments are evaluated by investigating the rare earth element (REE), major element, and trace element concentrations in 59 squeeze-cake whole-round and 27 physical-property sample residues from Sites 794, 795, and 797, cored during ODP Leg 127. The most important variation in sedimentary chemical composition is the increase in SiO2 concentration through the Pliocene diatomaceous sequences, which dilutes most other major and trace element components by various degrees. This biogenic input is largest at Site 794 (Yamato Basin), moderately developed at Site 797 (Yamato Basin), and of only minor importance at Site 795 (Japan Basin), potentially reflecting basinal contrasts in productivity with the Yamato Basin recording greater biogenic input than the Japan Basin and with the easternmost sequence of Site 794 lying beneath the most productive waters. There are few systematic changes in solid-phase chemistry resulting from the opal-A/opal-CT or opal-CT/quartz silica phase transformations. Most major and trace element concentrations are controlled by the aluminosilicate fraction of the sediment, although the effects of diagenetic silica phases and manganese carbonates are of localized importance. REE total abundances (IREE) in the Japan Sea are strongly dependent upon the paleoceanographic position of a given site with respect to terrigenous and biogenic sources. REE concentrations at Site 794 overall correspond well to aluminosilicate chemical indices and are strongly diluted by SiO2 within the upper Miocene-Pliocene diatomaceous sequence. Eu/Eu* values at Site 794 reach a maximum through the diatomaceous interval as well, most likely suggesting an association of Eu/Eu* with the siliceous component, or reflecting slight incorporation of a detrital feldspar phase. XREE at Site 795 also is affiliated strongly with aluminosilicate phases and yet is diluted only slightly by siliceous input. At Site 797, ΣRE E is not as clearly associated with the aluminosilicate fraction, is correlated moderately to siliceous input, and may be sporadically influenced by detrital heavy minerals originating from the nearby rifted continental fragment composing the Yamato Rise. Ce/Ce* profiles at all three sites increase essentially monotonically with depth and record progressive diagenetic LREE fractionation. The observed Ce/Ce* increases are not responding to changes in the paleoceanographic oxygenation state of the overlying water, as there is no independent evidence to suggest the proper Oceanographic conditions. Ce/Ce* correlates slightly better with depth than with age at the two Yamato Basin sites. The downhole increase in Ce/Ce* at Sites 794 and 797 is a passive response to the diagenetic transfer of LREE (except Ce) from sediment to interstitial water. At Site 795, the overall lack of correlation between Ce/Ce* and La/Y^ suggests that other processes mask the diagenetic behavior of all LREEs. First-order calculations of the Ce budget in Japan Sea waters and sediment indicate that ~20% of the excess Ce adsorbed by settling particles is recycled within the water column and that an additional -38% is recycled at or near the seafloor. Thus, because the remaining excess Ce is only -10% of the total Ce, there is not a large source of Ce to the deeply buried sediment, further suggesting that the downhole increase in Ce/Ce* is a passive response to diagenetic behavior of the other LREEs. The REE chemistry of Japan Sea sediment therefore predicts successive downhole addition of LREEs to deeply buried interstitial waters.

Conference Paper↗
USGS2016

Physical and chemical constraints limit the habitat window for an endangered mussel

Development of effective conservation and restoration strategies for freshwater pearly mussels requires identification of environmental constraints on the distributions of individual mussel species. We examined whether the spatial distribution of the endangered Alasmidonta heterodon in Flat Brook, a tributary of the upper Delaware River, was constrained by water chemistry (i.e., calcium availability), bed mobility, or both. Alasmidonta heterodon populations were bracketed between upstream reaches that were under-saturated with respect to aragonite and downstream reaches that were saturated for aragonite during summer baseflow but had steep channels with high bed mobility. Variability in bed mobility and water chemistry along the length of Flat Brook create a “habitat window” for A. heterodon defined by bed stability (mobility index ≤1) and aragonite saturation (saturation index ≥1). We suggest the species may exist in a narrow biogeochemical window that is seasonally near saturation. Alasmidonta heterodon populations may be susceptible to climate change or anthropogenic disturbances that increase discharge, decrease groundwater inflow or chemistry, and thus affect either bed mobility or aragonite saturation. Identifying the biogeochemical microhabitats and requirements of individual mussel species and incorporating this knowledge into management decisions should enhance the conservation and restoration of endangered mussel species.

New Jersey↗
USGS1986

Adaptation of Selenastrum capricornutum (Chlorophyceae) to copper

Selenastrum capricornutum Printz, growing in a chemically defined medium, was used as a model for studying adaptation of algae to a toxic metal (copper) ion. Cells exhibited lag‐phase adaptation to 0.8 μM total Cu (10 −12 M free ion concentration) after 20 generations of Cu exposure. Selenastrum adapted to the same concentration when Cu was gradually introduced over an 8‐h period using a specially designed apparatus that provided a transient increase in exposure concentration. Cu adaptation was not attributable to media conditioning by algal exudates. Duration of lag phase was a more sensitive index of copper toxicity to Selenastrum that was growth rate or stationary‐phase cell density under the experimental conditions used. Chemical speciation of the Cu dosing solution influenced the duration of lag phase even when media formulations were identical after dosing. Selenastrum initially exposed to Cu in a CuCl 2 injection solution exhibited a lag phase of 3.9 d, but this was reduced to 1.5 d when a CuEDTA solution was used to achieve the same total Cu and EDTA concentrations. Physical and chemical processes that accelerated the rate of increase in cupric ion concentration generally increased the duration of lag phase.

Environmental Toxicology and Chemistry↗
USGS1977

Mineralogical, chemical, and physical properties of the regolith overlying crystalline rocks, Fairfax County, Virginia: a preliminary report

Undisturbed cores of saprolite developed on crystalline rocks of the Piedmont Province in Fairfax County, Virginia have been obtained using a combination of Shelby tubes, Denison sampler, and modified diamond core-drilling. The principal purpose of the core study is to correlate variations in chemistry, mineralogy and texture with engineering properties throughout the weathering profile. Coring sites were chosen to obtain a maximum depth of weathering on diverse lithologies. The rocks investigated include pelitic schist, metagraywacke, granite, diabase and serpentinite. Four to twelve samples per core were selected, depending on thickness of 1) the weathering profile (from about 1 m in serpentinite to more than 30 m in pelitic schist) and on 2) megascopic changes in saprolite character for analysis of petrography, texture, clay mineralogy andd major element chemistry. Shear strength and compressibility were determined on corresponding segments of core. Standard penetration tests were performed adjacent to coring sites to evaluate engineering properties in situ. Geochemical changes of saprolite developed from each rock type follow predictable trends from fresh rock to soil profile, with relative Increases in Si, Ti, Al, Fe3+ and H20; variable K; and relative loss of Fe 2+, Mg, Ca, and Na. These variations are more pronounced in the weathering profiles over mafic and ultramafic rocks than metagraywacke. Clay minerals in granite, schist and metagraywacke saprolite are kaolinite, dioctahedral vermiculite, interlayered micavermiculite, and minor illite. Gibbsite is locally developed in near-surface samples of schist. Standard penetration test data for the upper 7 m of saprolite over schist and metagraywacke suggest alternations between stronger and weaker horizons than probably reflect variations in lithology including the presence of quartz lenses. Results for granite saprolite are most consistent but indicate lower strength. Shear strength increases fairly regularly downward in the weathering profile. The engineering behavior of diabase saprolite is controlled by a dense, plastic, near-surface clay layer (montmorillonite and kaolinite)overlying rock which is weathered to a granular state (grus), while engineering properties of serpentinite are determined by a very thin weathering profile.

Open-File Report↗
USGS1992

Diagenetic formation of bedded chert: Evidence from chemistry of the chert-shale couplet

Theories concerning the formation of bedded chert traditionally have emphasized either depositional or diagenetic processes. Major and rare earth element data from Franciscan assemblage (Mesozoic) and Claremont Formation (Miocene) bedded chert sequences, along with physical observations such as the presence of rare and highly corroded radiolarians in shale interbeds, are most consistent with a dominantly diagenetic origin of chert-shale couplets and are incompatible with many depositional theories. Chemical distributions between Franciscan and Claremont bedded chert=shale closely match chemical fractionations recorded by Monterey Formation and Deep Sea Drilling Project-sampled cherts formed by diagenetic SiO 2 dissolution, transport, and reprecipitation, suggesting that diagenetic migration of SiO 2 from proto-shale to proto-chert is also largely responsible for chert-shale couplets. Identical Ce anomalies (Ce/Ce*) found in immediately adjacent chert-shale layers indicate that turbidites or other transport mechanisms are not responsible for the alternating beds. Neither the chemistry of the chert-shale couplet nor the overall stratigraphy of the sequences is consistent with couplet formation being caused by productivity fluctuations. Chemical mass balance calculations reconstructing the total bulk sediment composition suggest that modern siliceous sequences do not contain enough labile biogenic SiO 2 to form entire stratigraphies of bedded chert.

Geology↗
USGS2008

Reconnaissance study of water quality in the mining-affected Aries River Basin, Romania

The Aries River basin of western Romania has been subject to mining activities as far back as Roman times. Present mining activities are associated with the extraction and processing of various metals including Au, Cu, Pb, and Zn. To understand the effects of these mining activities on the environment, this study focused on three objectives: (1) establish a baseline set of physical parameters, and water- and sediment-associated concentrations of metals in river-valley floors and floodplains; (2) establish a baseline set of physical and chemical measurements of pore water and sediment in tailings; and (3) provide training in sediment and water sampling to personnel in the National Agency for Mineral Resources and the Rosia Poieni Mine. This report summarizes basin findings of physical parameters and chemistry (sediment and water), and ancillary data collected during the low-flow synoptic sampling of May 2006.

Aries River Basin↗
USGS1986

Determination of the components of stormflow using water chemistry and environmental isotopes, Mattole River basin, California

The chemical and isotopic composition of rainfall and stream water was monitored during a storm in the Mattole River basin of northwestern California. About 250 mm of rain fell during 6 days (∼80% within a 42 h period) in late January, 1972, following 24 days of little or no precipitation. River discharge near Petrolia increased from 22 m 3 s −1 to a maximum of 1300 m 3 s −1 while chloride and silica concentrations decreased only from 3.2 to 2.1 and 11.5 to 8.6 mgl −1 , respectively. Meanwhile, the isotopic composition of the river changed from δD = -42%, δ 18 O = -6.8% and 40 tritium units (T.U.) to extreme values at highest flow of δD = -35%, δ 18 O = -5.9% and 25 T.U. in response to volume-weighted rainfall averaging δD = -19.5%, δ 18 O = -3.1% and 18 T.U. Despite much rainfall of a composition quite different from that of the prestorm river water, “buffering” processes in the watershed greatly restricted changes in the chemical and isotopic content of the river during storm runoff. Because of the physical and hydrologic characteristics of the watershed, major contributions of groundwater to stormflow are very unlikely. The large increase in dissolved chemical load observed at maximum river discharge required that extensive interaction with, and presumably penetration of, soils occurred within a few hours time. Such a large increase in chemical load also required subsurface stormflow throughout a high proportion of the watershed. Chemical and isotopic stabilization of stormflow is believed to be due mainly to displacement of prestorm soil water, with some effects on river chemistry due to rapid rain-soil interactions. The isotopic and chemical composition of prestorm soil moisture cannot readily be predicted a priori because of possible variability in rainfall composition, evaporation, and exchange with atmospheric moisture, nor can it be assumed that baseflow has a predictable relation to the chemical or isotopic composition of water displaced from soils during storms. Therefore, it seems inappropriate to draw conclusions as to the relative proportions of groundwater and rainfall in runoff from a particular storm based only on the average compositions of rainfall, stormflow, and prestorm river water, as has been done in most previous isotope hydrograph studies. Given the great variation in hydrology, topography, soil characteristics, rainfall intensity and quantity, etc. from place to place, the relative amount of overland flow, subsurface flow from the unsaturated zone and of groundwater in stormflow can vary greatly in time and space.

California↗
USGS2012

Stream ecosystems change with urban development

The healthy condition of the physical living space in a natural stream—defined by unaltered hydrology (streamflow), high diversity of habitat features, and natural water chemistry—supports diverse biological communities with aquatic species that are sensitive to disturbances. In a highly degraded urban stream, the poor condition of the physical living space—streambank and tree root damage from altered hydrology, low diversity of habitat, and inputs of chemical contaminants—contributes to biological communities with low diversity and high tolerance to disturbance.

General Information Product↗
USGS2005

Response curves for phosphorus plume lengths from reactive-solute-transport simulations of onland disposal of wastewater in noncarbonate sand and gravel aquifers

Surface-water resources in Massachusetts often are affected by eutrophication, excessive plant growth, which has resulted in impaired use for a majority of the freshwater ponds and lakes and a substantial number of river-miles in the State. Because supply of phosphorus usually is limiting to plant growth in freshwater systems, control of phosphorus input to surface waters is critical to solving the impairment problem. Wastewater is a substantial source of phosphorus for surface water, and removal of phosphorus before disposal may be necessary. Wastewater disposed onland by infiltration loses phosphorus from the dissolved phase during transport through the subsurface and may be an effective disposal method; quantification of the phosphorus loss can be simulated to determine disposal feasibility. In 2003, the U.S. Geological Survey, in cooperation with the Massachusetts Department of Environmental Protection, initiated a project to simulate distance of phosphorus transport in the subsurface for plausible conditions of onland wastewater disposal and subsurface properties. A coupled one-dimensional unsaturated-zone and three-dimensional saturated-zone reactive-solute-transport model (PHAST) was used to simulate lengths of phosphorus plumes. Knowledge of phosphorus plume length could facilitate estimates of setback distances for wastewater-infiltration sites from surface water that would be sufficient to protect the surface water from eutrophication caused by phosphorus transport through the subsurface and ultimate discharge to surface water. The reactive-solute-transport model PHAST was used to simulate ground-water flow, solute transport, equilibrium chemistry for dissolved and sorbed species, and kinetic regulation of organic carbon decomposition and phosphate mineral formation. The phosphorus plume length was defined for the simulations as the maximum extent of the contour for the 0.015 milligram-per-liter concentration of dissolved phosphorus downgradient from the infiltration bed after disposal cessation. Duration of disposal before cessation was assumed to be 50 years into an infiltration bed of 20,000 square feet at the rate of 3 gallons per square foot per day. Time for the maximum extent of the phosphorus plume to develop is on the order of 100 years after disposal cessation. Simulations indicated that phosphorus transport beyond the extent of the 0.015 milligram-per-liter concentration contour was never more than 0.18 kilogram per year, an amount that would likely not alter the ecology of most surface water. Simulations of phosphorus plume lengths were summarized in a series of response curves. Simulated plume lengths ranged from 200 feet for low phosphorus-concentration effluents (0.25 milligram per liter) and thick (50 feet) unsaturated zones to 3,400 feet for high phosphorus-concentration effluents (14 milligrams per liter) discharged directly into the aquifer (unsaturated-zone thickness of 0 feet). Plume length was nearly independent of unsaturated-zone thickness at phosphorus concentrations in the wastewater that were less than 2 milligrams per liter because little or no phosphorus mineral formed at low phosphorus concentrations. For effluents of high phosphorus concentration, plume length varied from 3,400 feet for unsaturated-zone thickness of 0 to 2,550 feet for unsaturated-zone thickness of 50 feet. Model treatments of flow and equilibrium-controlled chemistry likely were more accurate than rates of kinetically controlled reactions, notably precipitation of iron-phosphate minerals; the kinetics of such reactions are less well known and thus less well defined in the model. Sensitivity analysis indicated that many chemical and physical aquifer properties, such as hydraulic gradient and model width, did not affect the simulated plume length appreciably, but duration of discharge, size of infiltration bed, amount of dispersion, and number of sorption sites on the aquifer sediments did affect plume length appreciably. Because simulation of plume length in carbonate-mineral sediments indicated that the plume would be substantially longer than in noncarbonate-mineral sediments, the application of the response curves in locations with carbonate-mineral sediments would be inappropriate. The effect of carbonate minerals in sediments is to increase pH, which causes decreased sorption of phosphorus on aquifer sediments. Phosphorus removal from solution by precipitation onto aquifer sediments is more efficient at high concentrations of disposed phosphorus than at low concentrations. At very low phosphorus concentrations, the solubility product of phosphorus minerals is not exceeded and no phosphorus mineral forms. An important consequence is that removal of dissolved phosphorus from the plume by processes in the subsurface is decreased the more that removal efforts are applied in treatment before wastewater is disposed. Model simulations indicate that removal of phosphorus from wastewater disposed through septic systems would have the advantage of efficient phosphorus removal in the subsurface because phosphorus concentrations are high in septic-system effluent. Short plume lengths result from wastewater disposal through septic systems because of the efficient phosphorus removal and because of the low volume of wastewater involved. The simulation results for small-volume systems are not quantitative, however, because wastewater-infiltration rates are much lower than those of the higher-volume system that was used to calibrate the model and to create the plume-length response curves. The response curves for phosphorus plume lengths, as defined by the maximum extent of the 0.015 milligram-per-liter concentration contour, is clearly defined in the model simulations, although the relation between simulated plume length and protective setback distance is subject to interpretation. Phosphorus does move beyond the point at which the simulated 0.015 milligram-per-liter concentration contour has stopped, so that a determination of protective setback distance must include a consideration of whether that continued flux, or some other flux amount, is appropriate. Also, simulations indicate that phosphorus plumes do not reach their full extent until 50 to 200 years after disposal cessation, depending on concentration of phosphorus disposed. No phosphorus plume has been monitored for that long after cessation, so there is no way to verify the long-term simulation results.

Massachusetts↗
USGS1994

Hydrologic data from the study of acidic contamination in the Miami Wash-Pinal Creek area, Arizona, water years 1992-93

Since 1984, hydrologic data have been collected as part of a U.S. Geological Survey study of the occurrence and movement of acidic contamination in the aquifer and streams of the Pinal Creek drainage basin near Globe, Arizona. Ground-water data from that study are presented for water years 1992 and 1993 and include location, construction information, site plans, water levels, chemical and physical field measurements, and selected chemical analyses of water samples for 10 monitoring well groups. During January 1993, a flood occurred in Pinal Creek that resulted in a record peak discharge of 5,700 cubic feet per second. During this flood, well group 450 was destroyed. Surface-water data are presented for 13 sites and include discharge measurements, chemical and physical field measure- ments, and chemical analyses of water. Data from a solute-transport study that was conducted in November 1992 are presented for shallow ground-water and surface-water sites along Pinal Creek. During this study, variations in metal chemistry with distance along Pinal Creek and depth below the streambed were determined and two filter sizes were used to quantify the partitioning of metals between dissolved and particulate phases. Monthly precipi- tation data and long-term precipitation statistics are presented for two sites.

Arizona↗
USGS2023

Summary of the history and research of the U.S. Geological Survey gas hydrate properties laboratory in Menlo Park, California, active from 1993 to 2022

The U.S. Geological Survey (USGS) Clathrate Hydrate Properties Project, active from 1993 to 2022 in Menlo Park, California, stemmed from an earlier project on the properties of planetary ices supported by the National Aeronautics and Space Administration’s (NASA’s) Planetary Geology and Geophysics Program. We took a material science approach in both projects, emphasizing chemical purity of samples, having controlled grain size and grain texture, and having verified crystal structures and phase relations. A foundational contribution from our USGS Gas Hydrate Properties Laboratory (GHPL) was in demonstrating the ability to reproducibly create such pure clathrate hydrate samples for study. Clathrate sample synthesis was achieved by heating sieved and weighed pure granular water ice in the presence of cold clathrate-forming gas or liquid. During heating, the ice melts at the grain scale and reacts with the gas to form clathrate. The resulting material has the desired uniformity and purity, with known intergranular porosity; our subsequent measurements showed that these clathrates exhibited the established clathrate structures and phase relations. This novel synthesis method was successful in creating clathrates of pure methane, ethane, propane, carbon dioxide, and multi-component gases. By mixing sand or silt with granular ice, we were also able to make clathrate-sediment aggregates with controlled grain textures. This simple method, adopted by many others in the community, permitted us to measure the physical and chemical properties of well-characterized and well-crystallized clathrates and clathrate/sediment aggregates. At about the same time, we adapted conventional scanning electron microscopy to cryogenic conditions for analysis of grain-scale characteristics of clathrates made in the GHPL as well as those collected from nature by drill core. The uniformity and reproducibility of our samples also allowed us to investigate how clathrates respond to environmental changes in chemistry, temperature, and pressure: we measured chemical exchange rates with dissolved gas species—such as noble gases and chlorofluorocarbons—as well as rates of clathrate dissolution and decomposition. These advances include the first accurate mapping of the conditions that promote the remarkable process of “anomalous preservation” at room pressure, a metastability that offers potential application for low-cost and safe transportation of natural gas from gas fields far from pipelines. Another advancement stemming from the GHPL was the compaction of as-synthesized porous clathrates to nearly full density by applying external pressure using three different techniques. Compaction allows for high-accuracy measurements of many fundamental physical and chemical properties of these materials, such as elastic wavespeeds and moduli, complete thermal properties, decomposition rates, thermal expansion, and clathrate equations of state. These properties and others, in turn, have helped USGS scientists to interpret geophysical well logs and active geophysical surveys, as well as model the rates of gas production from hydrate deposits in nature. Studying this class of icy minerals that occur in abundance on Earth and in the outer solar system has been a fascinating laboratory journey. Here, we summarize the history and major findings of the USGS GHPL in Menlo Park, including both in-house research as well as findings from the synergistic collaborations with other agencies and institutes that were key to the success of our laboratory. The Menlo Park GHPL was more formally incorporated within the USGS Gas Hydrates Project, a collaboration among multiple USGS Science Centers, in the early 2000s under the leadership of Deborah Hutchinson, and now under the leadership of Carolyn Ruppel and Timothy Collett.

Open-File Report↗
USGS1985

A primer on trace metal-sediment chemistry

In most aquatic systems, concentrations of trace metals in suspended sediment and the top few centimeters of bottom sediment are far greater than concentrations of trace metals dissolved in the water column. Consequently, the distribution, transport, and availability of these constituents can not be intelligently evaluated, nor can their environmental impact be determined or predicted solely through the sampling and analysis of dissolved phases. This Primer is designed to acquaint the reader with the basic principles that govern the concentration and distribution of trace metals associated with bottom and suspended sediments. The sampling and analysis of suspended and bottom sediments are very important for monitoring studies, not only because trace metal concentrations associated with them are orders of magnitude higher than in the dissolved phase, but also because of several other factors. Riverine transport of trace metals is dominated by sediment. In addition, bottom sediments serve as a source for suspended sediment and can provide a historical record of chemical conditions. This record will help establish area baseline metal levels against which existing conditions can be compared. Many physical and chemical factors affect a sediment's capacity to collect and concentrate trace metals. The physical factors include grain size, surface area, surface charge, cation exchange capacity, composition, and so forth. Increases in metal concentrations are strongly correlated with decreasing grain size and increasing surface area, surface charge, cation exchange capacity, and increasing concentrations of iron and manganese oxides, organic matter, and clay minerals. Chemical factors are equally important, especially for differentiating between samples having similar bulk chemistries and for inferring or predicting environmental availability. Chemical factors entail phase associations (with such sedimentary components as interstitial water, sulfides, carbonates, and organic matter) and ways in which the metals are entrained by the sediments (such as adsorption, complexation, and within mineral lattices).

Water Supply Paper↗
USGS1984

Regional investigations of soil and overburden analysis and plant uptake of metals

Regional studies on the bioavailability of metals at native and disturbed sites were conducted over the past seven years by the USGS. The work was concentrated in the Fort Union, Powder River, and Green River coal resource regions where measures of extractable metals in soils were found to have limited use in predicting metal levels in plants. Correlations between Cu, Fe, and Zn in plants and extractable (DTPA, EDTA, and oxalate) or total levels in native A- and C-horizons of soil were occasionally significant. A simple linear model is generally not adequate, however, in estimating element uptake by plants. Prediction capabilities were improved when a number of soil chemical and physical parameters were included as independent variables in a stepwise linear multiple regression analysis; however, never more than 54% of the total variability in the data was explained by the equations for these metals. Soil pH was the most important variable relating soil chemistry to plant chemistry. This relation was always positive and apparently a response to soil levels of metal carbonates and not Fe and Mn oxides. Studies that compared the metal uptake by rehabilitation species to extractable (DTPA) metal levels in mice soils produced similar results. ?? 1984 Science and Technology Letters.

Minerals and the Environment↗