USGS Science⌕ Search

SEARCH · USGS Science

Results for “International Journal of Coal Geology”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5Linked to original sources
USGS2024

Novel insights about petroleum systems from source and reservoir rock characterization, Cretaceous Deposits, Babouri-Figuil Basin, Northern Cameroon

The Babouri-Figuil Basin (BFB) is a frontier basin for petroleum in Cameroon. It belongs to the series of Cretaceous rift basins of the West and Central Rift System (WCARS), the origin of which is related to the opening of the South Atlantic. Within the same rift system, commercial hydrocarbon accumulations have been discovered in Chad, Sudan, Niger and, more recently, in Nigeria (Gongola Basin). The study of the geology of the BFB just recently received considerable attention, mainly because of its presumed hydrocarbon potential. In the pursuit of researching possible petroleum systems in the BFB, the current study provides a first look into the characterization of source and reservoir rock and its integration into a 2D lithostratigraphic model. The study was solely based on outcrop samples. Black shale and massive claystone are good to excellent hydrocarbon source rocks [e.g., up to 38 wt% total organic carbon (TOC), up to 943 mg/g hydrogen index, up to 85 m thickness, up to 20–30 km lateral extension], with moderate to high values of extractable organic matter (e.g., >10,000 ppm). Calcareous claystone, on the other hand, are poor source rocks [e.g., <0.20 wt% TOC]. The samples are thermally immature, except for those located close to volcanic intrusion at Golombe that have reached the threshold for oil generation (Tmax >435 °C, production index >0.1). The petrographic analysis of sandstone revealed that they are fine-grained to coarse-grained, poorly to moderately sorted, texturally and compositionally immature to submature, subarkosic to arkosic arenites. The main diagenetic processes that affected sandstones are as follows: moderate to intense compaction characterized by the development of long, concavo-convex, and sutured contacts between grains; cementation through calcite, iron oxide, and quartz cements; alteration of mica and feldspar grains; partial to complete dissolution of feldspar, mica, amphibole grains, and calcite cement; and the replacement of feldspar and mica grains by clay minerals. Alteration and dissolution increase the porosity of sandstone through the creation of secondary pores. However, mechanical compaction through the development of a pseudomatrix and cementation as pore-filling materials have significantly reduced the quality of sandstone beds as conventional petroleum reservoirs. Hence, the best reservoir-quality sandstones in the basin are generally located in the upper portion of the basin in terms of its lithostratigraphic model. They are the cleanest sandstones with the smallest amount of cement and the lowest ductile grain content (pseudomatrix), with a thickness that varies from 3 m to 120 m and a lateral extension of 20 km. The lithostratigraphic model of the basin is characterized by an extensive lacustrine environment that provided a thick sequence of organic-rich formations; sand deposited as extensive reservoirs sandwiched between shale/claystone beds; the development of stratigraphic traps through lateral facies change; and the widespread deposition of lacustrine and floodplain claystone that provide regional seals. The similarities between the Babouri-Figuil Basin and proven petroleum systems in other WCARS rift basins suggest that the basin may host at least one petroleum system where actively generating source rocks are present.

Babouri-Figuil Basin↗
USGS1981

Concentration of some platinum-group metals in coal

New data on some platinum group metals in coal indicate that the concentration of Pt is generally less than about 5 ppb, that of Pd is generally less than 1 ppb, and that of Rh is generally less than 0.5 ppb. No conclusive evidence was obtained concerning the mode of occurrence of these elements in coal.

International Journal of Coal Geology↗
USGS1981

Rank of coal beds of the Narragansett basin, Massachusetts and Rhode Island

Coal of the Narragansett basin generally has been considered to be anthracite and/or meta-anthracite. However, no single reliable method has been used to distinguish these two ranks in this basin. Three methods — chemical, X-ray, and petrographic — have been used with some degree of success on coal of the Narragansett basin, but too often the results are in conflict. Chemical methods have been limited by inadequate sampling on a coal-bed-by-coal-bed basis and by a lack of analyses made according to (American Society for Testing and Materials, 1974) standard specifications. In addition, when corrections are made by using the Parr formulas, as required by the ASTM (1974) procedures, the generally high to very high ash content of coal from the Narragansett basin causes the fixed-carbon content to appear higher than it actually is. X-ray methods using the degree of graphitization as a measure of rank are not reliable because some of the graphite is related to shearing and brecciation associated with folding and faulting. Petrographic methods using reflectance on vitrinite give results that are generally consistent with results from chemical determinations. However, it is not clear whether the mean maximum reflectance or mean bireflectance is a better indicator of similar rank of such high-rank coals that have been structurally deformed. Coal from the Cranston Mine, RI, is probably meta-anthracite and coal from the Portsmouth Mine is probably anthracite. These ranks are based on chemical,X-ray, and petrographic data and are supported by associated metamorphic mineral assemblages that indicate that the Cranston Mine is in a higher metamorphic zone than the zone containing the Porthmouth Mine. Interpretation of the rank of Mansfield, MA, coal on the basis of extant chemical data is difficult because it is an impure coal with an ash content of 33 to 50%. Reflectance data indicate that the Mansfield, Foxborough, and Plainville coals in the northern part of the Narragansett basin are meta-anthracite but this is in disagreement with the rank suggested by the low degree of metamorphism of the associated rocks.

International Journal of Coal Geology↗
USGS1982

Application of automated image analysis to coal petrography

The coal petrologist seeks to determine the petrographic characteristics of organic and inorganic coal constituents and their lateral and vertical variations within a single coal bed or different coal beds of a particular coal field. Definitive descriptions of coal characteristics and coal facies provide the basis for interpretation of depositional environments, diagenetic changes, and burial history and determination of the degree of coalification or metamorphism. Numerous coal core or columnar samples must be studied in detail in order to adequately describe and define coal microlithotypes, lithotypes, and lithologic facies and their variations. The large amount of petrographic information required can be obtained rapidly and quantitatively by use of an automated image-analysis system (AIAS). An AIAS can be used to generate quantitative megascopic and microscopic modal analyses for the lithologic units of an entire columnar section of a coal bed. In our scheme for megascopic analysis, distinctive bands 2 mm or more thick are first demarcated by visual inspection. These bands consist of either nearly pure microlithotypes or lithotypes such as vitrite/vitrain or fusite/fusain, or assemblages of microlithotypes. Megascopic analysis with the aid of the AIAS is next performed to determine volume percentages of vitrite, inertite, minerals, and microlithotype mixtures in bands 0.5 to 2 mm thick. The microlithotype mixtures are analyzed microscopically by use of the AIAS to determine their modal composition in terms of maceral and optically observable mineral components. Megascopic and microscopic data are combined to describe the coal unit quantitatively in terms of (V) for vitrite, (E) for liptite, (I) for inertite or fusite, (M) for mineral components other than iron sulfide, (S) for iron sulfide, and (VEIM) for the composition of the mixed phases (X i ) i = 1,2, etc. in terms of the maceral groups vitrinite V, exinite E, inertinite I, and optically observable mineral content M. The volume percentage of each component present is indicated by a subscript. For example, a lithologic unit was determined megascopically to have the composition (V) 13 (I) 1 (S) 1 (X 1 ) 83 (X 2 ) 2 . After microscopic analysis of the mixed phases, this composition was expressed as (V) 13 (I) 1 (S) 1 (V 63 E 19 I 14 M 4 ) 83 (V 67 E 11 I 13 M 9 ) 2 . Finally, these data were combined in a description of the bulk composition as V 67 E 16 I 13 M 3 S 1 . An AIAS can also analyze textural characteristics and can be used for quick and reliable determination of rank (reflectance). Our AIAS is completely software based and incorporates a television (TV) camera that has optimum response characteristics in the range of reflectance less than 5%, making it particularly suitable for coal studies. Analysis of the digitized signal from the TV camera is controlled by a microprocessor having a resolution of 64 gray levels between full illumination and dark current. The processed image is reconverted for display on a TV monitor screen, on which selection of phases or features to be analyzed is readily controlled and edited by the operator through use of a lightpen. We expect that automated image analysis, because it can rapidly provide a large amount of pertinent information, will play a major role in the advancement of coal petrography.

International Journal of Coal Geology↗
USGS1982

Recommended procedures and techniques for the petrographic description of bituminous coals

Modern coal petrology requires rapid and precise description of great numbers of coal core or bench samples in order to acquire the information required to understand and predict vertical and lateral variation of coal quality for correlation with coal-bed thickness, depositional environment, suitability for technological uses, etc. Procedures for coal description vary in accordance with the objectives of the description. To achieve our aim of acquiring the maximum amount of quantitative information within the shortest period of time, we have adopted a combined megascopic-microscopic procedure. Megascopic analysis is used to identify the distinctive lithologies present, and microscopic analysis is required only to describe representative examples of the mixed lithologies observed. This procedure greatly decreases the number of microscopic analyses needed for adequate description of a sample. For quantitative megascopic description of coal microlithotypes, microlithotype assemblages, and lithotypes, we use (V) for vitrite or vitrain, (E) for liptite, (I) for inertite or fusain, (M) for mineral layers or lenses other than iron sulfide, (S) for iron sulfide, and (X 1 ), (X 2 ), etc. for mixed lithologies. Microscopic description is expressed in terms of V representing the vitrinite maceral group, E the exinite group, I the inertinite group, and M mineral components. volume percentages are expressed as subscripts. Thus (V) 20 (V 80 E 10 I 5 M 5 ) 80 indicates a lithotype or assemblage of microlithotypes consisting of 20 vol. % vitrite and 80% of a mixed lithology having a modal maceral composition V 80 E 10 I 5 M 5 . This bulk composition can alternatively be recalculated and described as V 84 E 8 I 4 M 4 . To generate these quantitative data rapidly and accurately, we utilize an automated image analysis system (AIAS). Plots of VEIM data on easily constructed ternary diagrams provide readily comprehended illustrations of the range of modal composition of the lithologic units making up a given coal bed. The use of bulk-specific-gravity determinations is alo recommended for identification and characterization of the distinctive lithologic units. The availability of an AIAS also enhances the capability to acquire textural information. Ranges of size of maceral and mineral grains can be quickly and precisely determined by use of an AIAS. We assume that shape characteristics of coal particles can also be readily evaluated by automated image analysis, although this evaluation has not yet been attempted in our laboratory. Definitive data on the particulate mineral content of coal constitute another important segment of petrographic description. Characterization of mineral content may be accomplished by optical identification, electron microprobe analysis, X-ray diffraction, and scanning and transmission electron microscopy. Individual mineral grains in place in polished blocks or polished this sections, or separated from the coal matrix by sink-float methods are studied by analytical techniques appropriate to the conditions of sampling.

International Journal of Coal Geology↗
USGS1982

Origin and distribution of tonsteins in late permian coal seams of Southwestern China

We have surveyed the areal and stratigraphic distribution of tonsteins in Late Permian coalfields of southwestern China over an area of several hundred thousand square kilometers. We studied the relationship between tonstein distribution and sedimentary environment. Based on mineralogical and petrographic data, we have concluded that these tonsteins originated as air-fall volcanic ashes. Following accumulation in the peat swamps, in situ alteration of the vitric and lithic components took place under acidic conditions, leading to the formation of kaolinite. Based on petrologic, mineralogic, and chemical analytical data, we have determined that the application of mineralogic and geochemical criteria for tonsteins may be useful in correlating coal beds, predicting coal qualities and reconstructing related sedimentary paleoenvironmental conditions.

International Journal of Coal Geology↗
USGS1982

Properties, origin and nomenclature of rodlets of the inertinite maceral group in coals of the central Appalachian basin, U.S.A.

Resin rodlets, sclerenchyma strands and woody splinters, which are collectively called rodlets, were studied by chemical, optical petrographic, and scanning-electron microscopic (SEM) techniques. A study was made of such rodlets from the bituminous coal beds of the central Appalachian basin (Pennsylvanian; Upper Carboniferous) of the United States. Comparisons were made with rodlets from coal beds of the Illinois basin, the Southern Anthracite Field of Pennsylvania, the St. Rose coal field of Nova Scotia, and European and other coal fields. In order to determine their physical and chemical properties, a detailed study was made of the rodlets from the Pomeroy coal bed (high volatile A bituminous coal; Monongahela Formation; Upper Pennsylvanian) of Kanawha County, West Virginia. The origin of the rodlets was determined by a comparative analysis of a medullosan (seed fern) stem from the Herrin (No. 6) coal bed (high volatile C bituminous coal; Carbondale Formation) from Washington County, Illinois. Rodlets are commonly concentrated in fusain or carbominerite layers or lenses in bituminous coal beds of the central Appalachian basin. Most of the rodlets examined in our study were probably derived from medullosan seed ferns. The three types of rodlets are distinguished on the basis of cellularity, morphology and fracture.

International Journal of Coal Geology↗
USGS1984

Resin rodlets in shale and coal (Lower Cretaceous), Baltimore Canyon Trough

Rodlets, occurring in shale and coal (uppermost Berriasian to middle Aptian, Lower Cretaceous), were identified from drill cuttings taken from depths between 9330 ft (2844 m) and 11, 460 ft (3493 m) in the Texaco et al., Federal Block 598, No. 2 well, in the Baltimore Canyon Trough. Under the binocular microscope, most of the rodlets appear black, but a few are reddish brown, or brownish and translucent on thin edges. They range in diameter from about 0.4 to 1.7 mm and are commonly flattened. The rodlets break with a conchoidal fracture, and some show an apparent cellular cast on their longitudinal surfaces. When polished and viewed in reflected light, the rodlets appear dark gray and have an average random reflectance of less than 0.1% whereas mean maximum reflectances are 0.48–0.55% for vitrinite in the associated shale and coal. These vitrinite reflectances indicate either subbituminous A or high-volatile C bituminous coal. The rodlets fluoresce dull gray yellow to dull yellow. The scanning electron microscope (SEM) and light microscope reveal the presence of swirl-like features in the rodlet interiors. Minerals associated with the rodlets occur as sand-size grains attached to the outer surface, as finely disseminated interior grains, and as fracture fillings. Electron microprobe and SEM-energy-dispersive X-ray (EDX) anlayses indicate that the minerals are dominantly clays (probably illite and chlorite) and iron disulfide; calcium carbonate, silicon dioxide, potassium aluminum silicate (feldspar), titanium dioxide, zinc sulfide, and iron sulfate minerals have been also identified. The rodlets were analyzed directly for C, H, N, O, and total S and are interpreted as true resins on the basis of C and H contents that range from 75.6 to 80.3 and from 7.4 to 8.7 wt. % (dry, ash-free basis), respectively. Elemental and infrared data support a composition similar to that of resinite from bituminous coal. Elements determined to be organically associated in the rodlets include S (0.2–0.5 wt.%), Cl (0.03–0.1 wt.%), and Si (0.05–0.08 wt.%). The ash content of the resin rodlets ranges from 4 to 24 wt.% and averages 12 wt.%. Total sulfur contents range from 1.7 to 3.6 wt.%. Resins of fossil plants are known to have little or no sulfur and ash; therefore, these data and the presence of minerals in fractures indicate that most of the sulfur and mineral matter were introduced into the resin partly or wholly after the time of brittle fracture of the resin. The probable source of the resin rodlets is fossil pinaceous conifer cones, which are known to have resin canals as much as 2400 μm in diameter.

International Journal of Coal Geology↗
USGS1984

Semi-quantitative ion microprobe mass analyses of mineral-rich particles from the upper freeport coal

An ion microprobe mass analyzer (IMMA) has been used to analyze semi-quantitatively mineral-rich coal particles from two separate facies of the Upper Freeport coal bed. Accuracy is estimated to be ∓ 20% for those elements making up more than 0.1 wt.% of the particles and ∓ 50% for elements making up less than 0.1 wt.%. Using IMMA data, we found statistically significant differences between the two samples for five (Fe, Ca, Mn, Li, Ce) of the 25 elements detected. For Li and Mn the differences between the mineral-rich particles within samples were similar to differences found between samples on a whole-coal basis. For Ca and Fe, the differences are attributed to different modes of occurrence, and for Ce, the differences are probably due to an irregular distribution of an inorganic phase. We conclude that the IMMA can be used to obtain semi-quantitative data that may provide insight into the distribution and mode of occurrence of some of the elements in coal.

International Journal of Coal Geology↗
USGS1985

Carboniferous paleogeographic, phytogeographic, and paleoclimatic reconstructions

Two revised paleogeographic reconstructions of the Visean and Westphalian C-D stages are presented based on recent paleomagnetic, phytogeographic, stratigraphic, and tectonic data. These data change the positions of some continental blocks, and allow the definition of several new ones. The most important modifications that have been incorporated in these reconstructions are: (1) a proposed isthmus linking North America and Siberia across the Bering Strait; and (2) the separation of China and Southeast Asia in six major blocks, including South China, North China, Shan Thai-Malaya, Indochina, Qangtang, and Tarim blocks. Evidence is presented that suggests that at least the South China, Shan Thai-Malaya, and Qangtang blocks were derived from the northern margin of Gondwana. Multivariate statistical analysis of phytogeographic data from the middle and late Paleozoic allow definition of a number of different phytogeographic units for four time intervals: (1) the Early Devonian, (2) Tournaisian—early Visean, (3) Visean, and (4) late Visean—early Namurian A. Pre-late Visean—early Namurian A floral assemblages from South China show affinities with northern Gondwana floras suggesting a southerly position and provides additional support for our reconstruction of South China against the northern margin of Gondwana. There is a marked decrease in the diversity of phytogeographic units in the Namurian and younger Carboniferous. This correlates closely with the time of assembly of most of Pangaea. The general pattern of Carboniferous phytogeographic units corresponds well with global distribution of continents shown on our paleogeographic reconstructions. In addition, we have constructed paleoclimatic maps for the two Carboniferous time intervals. These maps stress the distribution of rainfall, as this should be strongly correlated with the floras. There is marked change in the rainfall patterns between the Visean and Westphalian C-D. This change corresponds with the closing of the Appalachian-Ouachita ocean between Laurussia and Gondwana, and reflects the removal of a low-latitude moisture source that probably gave rise to monsoonal conditions along the northern margin of Gondwana in the Visean and earlier times. As well, the presence of a substantial heat source at high elevation in the Late Carboniferous significantly influenced the distribution of climatic belts.

International Journal of Coal Geology↗
USGS1985

Stratigraphic and interregional changes in Pennsylvanian coal-swamp vegetation: Environmental inferences

Quantitative analysis of Pennsylvanian coal-swamp vegetation provides a means of inferring organization and structure of communities. Distribution of these communities further provides inferences about environmental factors, including paleoclimate. Our observations are based on in situ, structurally preserved peat deposits in coal-ball concretions from 32 coal seams in the eastern one-half of the United States and from several seams in western Europe and on spore assemblages from more than 150 seams. There were three times of particularly significant and nearly synchronous vegetational changes in the Midcontinent and Appalachian coal regions during the Pennsylvanian Period. Each was different in kind and magnitude. The first marked changes occurred during the early part of the Middle Pennsylvanian with the fluctuating decline in the high level of lycopod dominance. The abundance of cordaites increased. There was a rise in the occurrences of the lycopod herbs to form intercalated marshlands and an overall increase in floral diversity. Changes ensuing from this time also include shifts in dominant species of lycopod trees and a sustained rise in abundance and diversity of tree-fern spores. The next significant time of change was during the middle part of the Middle Pennsylvanian, representing both a culmination of earlier trends and expansions of cordaites in the Midcontinent where there was a maximum change in species without net loss of diversity. Tree ferns and medullosan pteridosperms attained subdominant levels of abundance and diverse lycopod species dominated except in the Atokan-Desmoinesian transition of the Midcontinent. The third and sharpest break occurred near the Middle—Late Pennsylvanian boundary when extinctionsof the dominant, coal-swamp lycopods allowed development of tree-fern dominance. The Late Pennsylvanian coal swamps apparently were colonized or recolonized mainly by species from outside coal swamps rather than by the survivor populations of the Middle Pennsylvanian swamps. Paralleling the changes in floras through the Pennsylvanian are changes in preservational aspects of the peat. These include a decline in shoot/root ratios from approximately 1 to < 1 during the first time of vegetational changes and a rise in this ratio during the second; there was a parallel rise and fall in fusain abundance and a rise in wood/periderm ratios. The stratigraphic distribution of identified coal resources in the United States is interpreted as largely dependent on net changes in relative wetness of Pennsylvanian coal swamps, a pattern of drying during the first period of vegetational change, followed by a concomitant increase in continuous wet climate with brackish influence in the Midcontinent during the second; this was followed by a time of extreme moisture stress bringing on the third, and most severe, vegetational change.

International Journal of Coal Geology↗
USGS1985

Maceral distributions in Illinois coals and their paleoenvironmental implications

For purposes of assessing the maceral distribution of Illinois (U.S.A.) coals analyses were assembled for 326 face channel and drill core samples from 24 coal members of the Pennsylvanian System. The inertinite content of coals from the Missourian and Virgilian Series averages 16.1% (mineral free), compared to 9.4% for older coals from the Desmoinesian and older Series. This indicates there was generally a higher state of oxidation in the peat that formed the younger coals. This state probably resulted from greater exposure of these peats to weathering as the climate became drier and the water table lower than was the case for the older coals, although oxidation during allochthonous deposition of inertinite components is a genetic factor that needs further study to confirm the importance of the climate. Regional variation of the vitrinite-inertinite ratio (V-I), on a mineral- and micrinite-free basis, was observed in the Springfield (No. 5) and Herrin (No. 6) Coal Members to be related to the geographical position of paleochannel (river) deposits known to have been contemporaneous with the peats that formed these two coal strata. The V-I ratio is highest (generally 12–27) in samples from areas adjacent to the channels, and lower (5–11) some 10–20 km away. We interpret the V-I ratio to be an inverse index of the degree of oxidation to which the original peat was exposed. High V-I ratio coal located near the channels probably formed under more anoxic conditions than did the lower V-I ratio coal some distance away from the channels. The low V-I ratio coal probably formed in areas of the peat swamp where the watertable was generally lower than the channel areas.

International Journal of Coal Geology↗
USGS1985

Paleoclimate controls on late paleozoic sedimentation and peat formation in the central appalachian basin (U.S.A.)

In the central Appalachian basin, at least two major climate changes affected sedimentation during the late Paleozoic. Stratigraphically, these two changes are indicated by the distribution of coal beds, the variation in coal quality, and the variation in rock lithologies. In latest Mississippian or earliest Pennsylvanian time, the climate changed from dry-seasonal tropical to ever-wet (equable) tropical. The equable climate prevailed into the Middle Pennsylvanian, influencing the morphology and geochemistry in peat-forming environments. Many of the peat deposits, which formed under the equable climate, were probably domed (raised bogs); low concentrations of dissolved solids in peat formation water resulted in low buffering capacity. Organic acids caused acidic (pH < 4), antiseptic conditions that resulted in intense leaching of mineral matter, minimal degradation of organic matter, and low-ash and low-sulfur peat deposits; the resulting coal beds are also low in ash and sulfur. Associated rocks are noncalcareous and consist of sequences of interbedded shale, siltstone, and sandstone including quartz arenite. Another climate change occurred in late Middle Pennsylvanian time when evapopation periodically exceeded rainfall resulting in an increase of both dissolved solids and pH (4 to ∼ 7) in surface and near-surface water. Throughout the remainder of the Pennsylvanian, the surfaces of peat deposits were probably planar (not domed); water in peat-forming and other depositional environments became more nearly neutral. The coal beds derived from these peats are highly variable in both ash and sulfur contents. Drier or more seasonal climates are also indicated by sequences of (1) calcareous sandstone and shale, (2) nonmarine limestone that shows shallow-water and subaerial exposure features, and (3) calcareous paleosols that have caliche characteristics. Our data and observations indicate that physical depositional environment models for the origin of coal do not adequately explain variations in mineral matter content and composition in commercial quality coal beds in the central Appalachian basin. Stratigraphic variation in mineral matter in coal beds, and in syngenetic and early diagenetic minerals in rocks associated with the coal beds, appears to be better explained by changes in geochemical conditions of nonmarine sedimentation. Paleoclimate was a principle control on these geochemical conditions.

International Journal of Coal Geology↗
USGS1985

Origin of discontinuities in coal-bearing strata at roaring creek (basal Pennsylvanian of Indiana)

Basal Pennsylvanian coal-bearing strata exposed along Roaring Creek, west-central Indiana, exhibit extreme lateral discontinuity. Coal seams abruptly change in thickness and elevation; they split, grade into shale, are cut out by channels and disrupted by soft-sediment deformational structures. Initial sediments were laid down by a network of southwest-flowing streams that traversed a deeply channelized upland surface of Mississippian carbonate rocks. Channels aggraded rapidly as uplands were worn down, so the region changed through time from uplands to upper deltaic plain. Local environments included channels, localized point bars, small natural levees and crevasse splays, overbank deposits, and swamps. Differential compaction and subsidence, slumping stream banks, and possibly collapsing sinkholes influenced sedimentation. As a consequence, coals are too discontinuous for economical mining, although they are locally thick and high in quality.

International Journal of Coal Geology↗
USGS1987

Early diagenesis of organic matter in a Sawgrass peat from the Everglades, Florida

The transformation of plant biopolymers to humic substances in peats during early diagenesis is a critical but poorly understood step in the formation of coal. This paper presents results concerning the structural interrelationships among various fractions of the organic matter in peat and the dissolved organic matter in the pore water from a site in The Everglades, relying primarily on elemental analysis and 13 C nuclear magnetic resonance for structural elucidation. Our goal was to obtaine some insight into the sequence of steps involved in the formation of humic substances Results show that the major change occurring in the whole peat during diagenesis is loss of carbohydrates. The components of the peat which are more resistant to microbial degradation become concentrated in the humin fraction. This resistant fraction of the organic matter includes aliphatic and aromatic components. The aromatic components are thought to be derived from lignin while the aliphatic moieties may represent decomposed algal remains. The carbohydrates lost from the whole peat appear to be concentrated in the fulvic acids and the dissolved organic matter in the pore water. The humic acids consist predominantly of aromatic and aliphatic structures, and may represent partially degraded lignin-like structures and aliphatic compounds from algae. The data presented here suggest that humic and fulvic acids are the partially degraded fractions of the peat while the humin contains the resistant or preserved portion of the organic matter. The proposition that humic substances are formed by the condensation of amino acids and sugars is not supported by the results of this study.

International Journal of Coal Geology↗
USGS1987

Relationship between peat geochemistry and depositional environments, Cranberry Island, Maine

The Heath, Great Cranberry Island, Maine, offers a unique locality for studying lateral and vertical relationships between radically different peat types within 1 km 2 . The majority of The Heath is a Sphagnum moss-dominated raised bog. Surrounding the raised bog is a swamp/marsh complex containing grass, sedge, Sphagnum moss, alder, tamarack, and skunk cabbage. Swamp/ marsh-deposited peat occurs both around the margins of The Heath and under Sphagnum -dominated peat, which was deposited within the raised bog. A third peat type, dominated by herbaceous aquatics, is present underlying the swamp/marsh-dominated peat but is not present as a dominant botanical community of The Heath. The three peat types have major differences in petrographic characteristics, ash contents, and associated minerals. Sulfur contents range from a low of 0.19 wt.% (dry) within the raised bog to a high of 4.44 wt% (dry) near the west end of The Heath, where swamp/marsh peat occurring directly behind a storm beach berm has been influenced by marine waters. The presence of major geochemical variations within a 1-km 2 peat deposit suggests the need for in-depth characterization of potential peat resources prior to use.

International Journal of Coal Geology↗
USGS1987

Application of laser microprobe (LAMMA 1000) to "fingerprinting" of coal constituents in bituminous coal

A laser microprobe (LAMMA-1000) microchemical analysis of vitrinites of different morphologies but similar reflectances within the same bituminous coal bed indicates distinct “fingerprint” spectra. The banded form of vitrinite contains Li, Ti, Ba, Sr, F, and Cl which were not detected in the nonbanded vitrinite. These differences may indicate a different plant source or the introduction of these elements from fluids mobilized during diagenesis. The nonbanded vitrinite (called corpocollinite), which was contained in a pyrite coal-ball seed fern permineralization of Myeloxylon , may have been protected from influx of these elements due to entrapment by pyrite during an early peat stage. An ion at M/Z 65, which is characteristic of the banded vitrinite, may indicate C 5 H 5 + and, perhaps a difference in the chemical structure of the two vitrinites. These results demonstrate that “fingerprint” spectra can be obtained from vitrinite macerals by LAMMA and that these “fingerprints” have genetic implications.

International Journal of Coal Geology↗