USGS Science⌕ Search

SEARCH · USGS Science

Results for “Information Services and Use”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5Linked to original sources

Flood-inundation maps for the Iroquois River at Rensselaer, Indiana

Digital flood-inundation maps for a 4.0-mile reach of the Iroquois River at Rensselaer, Indiana (Ind.), were created by the U.S. Geological Survey (USGS) in cooperation with the Indiana Department of Transportation. The inundation maps, which can be accessed through the USGS Flood Inundation Mapping Science Web site at http://water.usgs.gov/osw/flood_inundation/, depict estimates of the areal extent and depth of flooding corresponding to selected water levels (stages) at USGS streamgage 05522500, Iroquois River at Rensselaer, Ind. Current conditions for estimating near-real-time areas of inundation using USGS streamgage information may be obtained on the Internet at (http://waterdata.usgs.gov/in/nwis/uv?site_no=05522500). In addition, the National Weather Service (NWS) forecasts flood hydrographs at the Rensselaer streamgage. That forecasted peak-stage information, also available on the Internet (http://water.weather.gov/ahps/), may be used in conjunction with the maps developed in this study to show predicted areas of flood inundation. For this study, flood profiles were computed for the Iroquois River reach by means of a one-dimensional step-backwater model developed by the U.S. Army Corps of Engineers. The hydraulic model was calibrated by using the most current (June 27, 2012) stage-discharge relations at USGS streamgage 05522500, Iroquois River at Rensselaer, Ind., and high-water marks from the flood of July 2003. The calibrated hydraulic model was then used to determine nine water-surface profiles for flood stages at 1-foot intervals referenced to the streamgage datum and ranging from bankfull to the highest stage of the current stage-discharge rating curve. The simulated water-surface profiles were then combined with a Geographic Information System digital elevation model (derived from Light Detection and Ranging (LiDAR) data) in order to delineate the area flooded at each water level. The availability of these maps, along with Internet information regarding current stage from the USGS streamgage at Rensselaer, Ind., and forecasted stream stages from the NWS, provides emergency management personnel and residents with information that is critical for flood response activities such as evacuations and road closures, as well as for post-flood recovery efforts.

Indiana↗

Using standardized fishery data to inform rehabilitation efforts

Lakes and reservoirs progress through an aging process often accelerated by human activities, resulting in degradation or loss of ecosystem services. Resource managers thus attempt to slow or reverse the negative effects of aging using a myriad of rehabilitation strategies. Sustained monitoring programs to assess the efficacy of rehabilitation strategies are often limited; however, long-term standardized fishery surveys may be a valuable data source from which to begin evaluation. We present 3 case studies using standardized fishery survey data to assess rehabilitation efforts stemming from the Nebraska Aquatic Habitat Plan, a large-scale program with the mission to rehabilitate waterbodies within the state. The case studies highlight that biotic responses to rehabilitation efforts can be assessed, to an extent, using standardized fishery data; however, there were specific areas where minor increases in effort would clarify the effectiveness of rehabilitation techniques. Management of lakes and reservoirs can be streamlined by maximizing the utility of such datasets to work smarter, not harder. To facilitate such efforts, we stress collecting both biotic (e.g., fish lengths and weight) and abiotic (e.g., dissolved oxygen, pH, and turbidity) data during standardized fishery surveys and designing rehabilitation actions with an appropriate experimental design.

Nebraska↗

The next generation of products and methodologies to establish biocrusts in degraded ecosystems

Biological soil crusts (biocrusts) – thin, coherent soil surface layers aggregated and inhabited by communities of tiny photoautotrophic and heterotrophic organisms – support ecosystem functioning in drylands and influence the Earth system. Biocrust loss due to disturbance, global change and land use leads to altered hydrological function, susceptibility to erosion and diminished biogeochemical cycling, with consequences extending to regional and global environmental quality and ecosystem service provisioning. To restore degraded drylands, specific techniques could inform how to 1. produce biocrust biota ex situ for use as an inoculum in degraded environments and then 2. encourage the establishment of the inoculum in high-stress environments. To re-establish lost biocrusts, a promising pathway could be the integration of adding biocrust biota (inoculation), ensuring that it stays where applied (retention) and softening environmental stresses and limitations (amelioration) at approximately the same time. Several techniques, most of them developed in only the past few years, demonstrate this integration: biocrust sods, cloths, pellets, capsules and slurries. Biocrust sods are fabric-reinforced patches of biocrust growing on soil, produced in farms and transported to and deployed intact in field sites. Biocrust cloths are fabrics and sheets with biocrust biota grown directly on their surface in greenhouse-based fog chambers that can be attached to soil in the field. Biocrust pellets are small, protective pieces of a binder material (often clay) infused with biocrust inoculum. Biocrust capsules are biodegradable gel capsules filled with biocrust inoculum, often with protective substances. Both pellets and capsules are broadcast over degraded soils. Biocrust slurries are semi-liquid suspensions of biocrust inoculum and other solids that are sprayed or spread in degraded sites. Emerging techniques like these have the potential to restore highly functional drylands and their ecosystem services. Potential applications include ecological restoration of dryland areas disturbed by fire, overgrazing, agriculture, mining and other factors or environmental engineering in other contexts such as cultural heritage sites, croplands or human infrastructure. The next-generation techniques for biocrust restoration described here are tools that could be applied to solve small- to medium-scaled challenges now and with increased production efficiency and informed, strategic use of the products, large-scaled challenges in the future.

Drylands↗

Problems of Large Spatial Databases

Large spatial databases often labeled as geospatial big data exceed the capacity of commonly used computing systems as a result of data volume, variety, velocity, and veracity. Additional problems also labeled with V’s are cited, but the four primary ones are the most problematic and focus of this chapter (Li et al., 2016, Panimalar et al., 2017). Sources include satellites, aircraft and drone platforms, vehicles, geosocial networking services, mobile devices, and cameras. The problems in processing these data to extract useful information include query, analysis, and visualization. Data mining techniques and machine learning algorithms, such as deep convolutional neural networks, often are used with geospatial big data. The obvious problem is handling the large data volumes, particularly for input and output operations, requiring parallel read and write of the data, as well as high speed computers, disk services, and network transfer speeds. Additional problems of large spatial databases include the variety and heterogeneity of data requiring advanced algorithms to handle different data types and characteristics, and integration with other data. The velocity at which the data are acquired is a challenge, especially using today’s advanced sensors and the Internet of Things that includes millions of devices creating data on short temporal scales of micro seconds to minutes. Finally, the veracity, or truthfulness of large spatial databases is difficult to establish and validate, particularly for all data elements in the database.

Book chapter↗

Using smooth sheets to describe groundfish habitat in Alaskan waters, with specific application to two flatfishes

In this analysis we demonstrate how preferred fish habitat can be predicted and mapped for juveniles of two Alaskan groundfish species – Pacific halibut ( Hippoglossus stenolepis ) and flathead sole ( Hippoglossoides elassodon ) – at five sites (Kiliuda Bay, Izhut Bay, Port Dick, Aialik Bay, and the Barren Islands) in the central Gulf of Alaska. The method involves using geographic information system (GIS) software to extract appropriate information from National Ocean Service (NOS) smooth sheets that are available from NGDC (the National Geophysical Data Center). These smooth sheets are highly detailed charts that include more soundings, substrates, shoreline and feature information than the more commonly-known navigational charts. By bringing the information from smooth sheets into a GIS, a variety of surfaces, such as depth, slope, rugosity and mean grain size were interpolated into raster surfaces. Other measurements such as site openness, shoreline length, proportion of bay that is near shore, areas of rocky reefs and kelp beds, water volumes, surface areas and vertical cross-sections were also made in order to quantify differences between the study sites. Proper GIS processing also allows linking the smooth sheets to other data sets, such as orthographic satellite photographs, topographic maps and precipitation estimates from which watersheds and runoff can be derived. This same methodology can be applied to larger areas, taking advantage of these free data sets to describe predicted groundfish essential fish habitat (EFH) in Alaskan waters.

Alaska↗

Social values for ecosystem services (SolVES): A GIS application for assessing, mapping, and quantifying the social values of ecosystem services-Documentation and user manual, version 1.0

In response to the need for incorporating quantified and spatially explicit measures of social values into ecosystem services assessments, the Rocky Mountain Geographic Science Center, in collaboration with Colorado State University, has developed a geographic information system application, Social Values for Ecosystem Services (SolVES). SolVES can be used to assess, map, and quantify the perceived social values of ecosystem services. SolVES derives a quantitative social values metric, the Value Index, from a combination of spatial and nonspatial responses to public attitude and preference surveys. SolVES also generates landscape metrics, such as average elevation and distance to water, calculated from spatial data layers describing the underlying physical environment. Using kernel density calculations and zonal statistics, SolVES derives and maps the 10-point Value Index and reports landscape metrics associated with each index value for social value types such as aesthetics, biodiversity, and recreation. This can be repeated for various survey subgroups as distinguished by their attitudes and preferences regarding public uses of the forests such as motorized recreation and logging for fuels reduction. The Value Index provides a basis of comparison within and among survey subgroups to consider the effect of social contexts on the valuation of ecosystem services. SolVES includes regression coefficients linking the predicted value (the Value Index) to landscape metrics. These coefficients are used to generate predicted social value maps using value transfer techniques for areas where primary survey data are not available. SolVES was developed, and will continue to be enhanced through future versions, as a public domain tool to enable decision makers and researchers to map the social values of ecosystem services and to facilitate discussions among diverse stakeholders regarding tradeoffs between different ecosystem services in a variety of physical and social contexts.

Open-File Report↗

Use of USGS earth-science products by county planning agencies in the San Francisco Bay region, California

An inventory of the use of USGS products in selected planning studies, plans, ordinances, and other planning activities was made for eight counties in the San Francisco Bay region--a region of almost five million people. This inventory was designed to determine and document the use of the 87 earth-science information products prepared as a part of the San Francisco Bay Region Environment and Resources Planning Study (SFBRS). The inventory showed that: (1) all eight counties had planning staffs who were very familiar with SFBRS products and had made frequent use of such products; (2) all eight counties had prepared planning documents which cite SFBRS products; (3) the types of planning applications most often indicated were: geologic hazards studies, seismic safety and public safety plan elements, general reference, and the preparation and review of environmental impact reports and statements; (4) over 90 percent of the 87 SFBRS products were used at least once, and nine of the products were used over 30 times each for various county planning activities; and (5) at least 85 other USGS products were also used for various county planning activities. After the inventory, selected county officials, employees, and consultants were interviewed and asked--among other things--to indicate any problems in the use of the SFBRS products, to suggest improvements, and to identify any needed or desired earth-science information. The responses showed that: (1) the scales commonly used for working maps were 1:62,500 or larger and for plan implementation were 1:24,000 or larger; (2) only one county had a geologist on its planning staff, although six others had the benefit of geotechnical services from private consulting firms, county engineering staffs, or the State Division of Mines and Geology; (3) seven of the eight counties expressed some problems in using the products, primarily because of their small scale or lack of detail; (4) all eight counties expected to continue to use the products and expressed a need or desire for additional earth-science, engineering, or other information; (5) all eight counties suggested specific improvements to future products, primarily larger scale or more detail and fewer technical or more interpretive products; and (6) all eight counties received educational, advisory, and review services from USGS personnel. Seventeen selected examples of the application of SFBRS products to various county planning activities are discussed and illustrated. These examples include four planning studies, seven plans, and two ordinances. From the inventory and responses to the interviews, it is concluded that the counties in the Bay region are very familiar with, have made frequent use of, and will continue to use SFBRS products for a wide range of county planning activities. Suggestions to ensure more effective use of earth-science information in the future include: (1) monitoring emerging critical issues and analyzing new state and federal laws and regulations so as to better anticipate and respond to county earth-science information needs; (2) creating a users advisory committee to help identify critical issues and user needs; (3) providing engineering interpretations and land- and water-use capability ratings to make earth-science information more readily usable; (4) giving priority to areas impacted by development so as to husband staff resources; (5) providing earth-science information at the larger scale and greater detail commonly used and needed by counties; (6) releasing earth-science information earlier and according to a formal distribution pattern; and (7) providing educational, advisory, and review services in connection with any earth-science information designed for planners and decisionmakers.

Open-File Report↗

Captive propagation, introduction, and translocation programs for wildlife vertebrates

Captive propagation, introduction, and translocation (relocation) programs for many animals have been undertaken by federal, state, and private agencies for more than 20 years. These programs help aid the recovery of endangered and threatened species, reestablish lost species, augment declining populations, increase recreational opportunities, reduce nuisance species, and introduce non-native species. Davidson and Nettles (1992) discuss translocation as a component of successful early restorations of game species including wild turkey ( Meleagris gallopavo ) and white-tailed deer ( Odocoileus virginianus ), and recovery of endangered species such as the peregrine falcon (Falco peregrinus). Despite some successes, the total number of translocations that occur yearly is unknown, as is the success and effects of these programs, because there is rarely appreciable monitoring after release (Griffith et al. 1989; Gogan 1990). This report focuses on trends in the use of translocation programs and disease transmission following translocation of wildlife vertebrates other than fish. In the absence of a national data base on wildlife translocations, a search for publications with information on translocations was performed by using Wildlife Review and the U.S. Fish and Wildlife Reference Service CD-ROM data bases for the 20-year period, 1971-91. In addition, personnel from multiple federal, state, and private agencies that conduct propagation and translocation programs were contacted for supplemental information and literature. Increasing numbers of books (Neilsen and Brown 1988), journals (Ullrey 1993), and meetings (Junge 1992; Wolff and Seal 1992) discuss wildlife translocations and many contain information on the effects of translocations on animals and their environment.

Book chapter↗

Assessment of polycyclic aromatic hydrocarbon concentrations in southern Lake Powell, Glen Canyon National Recreation Area, Arizona and Utah, 2016–17

Polycyclic aromatic hydrocarbon contamination related to boat use is one of the most important water-quality issues affecting Lake Powell. High concentrations of polycyclic aromatic hydrocarbons in water are common around marinas and other areas with extensive motorboat activity because of releases of uncombusted or partially combusted oil and gasoline from boat engines. The fate of these compounds in Lake Powell is of serious environmental concern because of their toxicity and carcinogenicity and their moderate persistence once they enter the aquatic ecosystem. In 2016–17, the U.S. Geological Survey (USGS) assessed the presence and concentrations of polycyclic aromatic hydrocarbons in Lake Powell at seven sites where concentrations have historically been elevated and one site where concentrations have historically been relatively low. Semipermeable membrane devices were used to collect samples that represent time-weighted averages of polycyclic aromatic hydrocarbon concentrations in water over one-month deployment periods. Samples were collected from the epilimnion of the lake at each of the eight sampling sites during two periods of relatively high boat use (summer), and one period of relatively low boat use (spring). Twenty-eight out of 33 polycyclic aromatic hydrocarbons analyzed were detected in Lake Powell during the three sampling events. During the two summer sampling events, concentrations were generally higher, and more compounds were detected, than during the spring sampling event. Twenty-two of the polycyclic aromatic hydrocarbons analyzed in 2016–17 had previously been analyzed by the USGS in the summer of 2010 at the same 8 sites using the same collection method. Eleven of 22 compounds were detected in the summer 2010, summer 2016, and summer 2017 sampling events, and 1 was detected in the summer 2010 and summer 2017 samplings, but not in the summer 2016 sampling event. During both the current and previous sampling events, concentrations were generally higher, and more compounds were detected, at the high-use marina sites located most downstream on the lake. The consistent presence of a wide range of polycyclic aromatic hydrocarbons in the water of Lake Powell indicates chronic and (or) recent anthropogenic sources of contamination. The results from this study will provide the National Park Service with information necessary to determine if the current regulations on emission standards for personal watercraft used on Lake Powell are effective in lowering polycyclic aromatic hydrocarbon concentrations in the lake.

Arizona, Utah↗

Use of the instream flow incremental methodology: a tool for negotiation

The resolution of conflicts arising from differing values and water uses requires technical information and negotiating skills. This article outlines the Instream Flow Incremental Methodology (IFIM), developed by the US Fish and Wildlife Service, and demonstrates that its use to quantify flows necessary to protect desired instream values aids negotiation by illustrating areas of agreement and possible compromises between conflicting water interests. Pursuant to a Section 404 permit application to the US Army Corps of Engineers made by City Utilities of Springfield, Missouri, in 1978, IFIM provided the means by which City Utilities, concerned with a secure water supply for a growing population, and those advocating instream values were satisfied that their requirements were met. In tracing the 15-month process, the authors conclude that the application of IFIM, as well as the cooperative stance adopted by the parties involved, were the key ingredients of the successful permit application.

Environmental Impact Assessment Review↗

Design of a shallow ground-water network to monitor agricultural chemicals, Lake Wales Ridge, central Florida

Extensive agricultural land use and dynamic hydraulic connections between the land surface and ground-water resources render many of Florida's aquifers vulnerable to chemical contamination. In these areas, there is a need to monitor shallow ground water for agricultural chemicals to evaluate potential migration of the chemicals to the subsurface and to deeper aquifers, and to assess the effects of agricultural practices on ground-water quality. Historically, efforts to monitor water-table aquifers have been minimal compared with monitoring deeper aquifers used for municipal drinking-water supply. The Florida Department of Agriculture and Consumer Services has proposed the establishment of long-term, water-quality networks to monitor shallow ground water in agricultural areas of Florida. These networks will bridge the current information gap between local-scale short-duration field studies, which are required for pesticide licensing, and statewide monitoring of deeper ground-water resources. Laboratory (experimental) and short-term field evaluations of the transport of agricultural chemicals to the subsurface contain some degree of uncertainty due to widespread variations in environmental conditions. The proposed regional-scale shallow ground-water networks will serve as "early warning" networks to avoid contamination of ground-water resources. The objectives of these shallow ground-water networks are to provide information for early detection of pesticides and nitrate in the subsurface, and for evaluating temporal trends in concentrations in relation to changes in land use and agricultural practices. Information on trends is important to the U.S. Environmental Protection Agency, State agencies, and agricultural managers, and is an integral part of Florida's Pesticide Management Plan, which evaluates the effectiveness of implementing "best management practices" to minimize environmental impacts. Lake Wales Ridge in Polk and Highlands Counties has been identified by the Florida Department of Agriculture and Consumer Services as a pilot study area for implementing a regional shallow ground-water network. Information gained from designing the Lake Wales Ridge Network will be used to develop plans as similar networks are considered for other areas of Florida. Lake Wales Ridge is heavily utilized for citrus production, but the well-drained, clean sands underlying the region, coupled with a hydraulic connection with deeper karst formations, render the area extremely vulnerable to the transport and migration of agricultural chemicals within the subsurface. The network design for Lake Wales Ridge was developed on the basis of the objectives of monitoring, factors affecting aquifer vulnerability, probability (statistical) sampling theory, and specifications regarding well construction, sampling, and laboratory analysis. The network will provide estimates of regional pesticide and nitrate concentrations in targeted ground water, monitor for trends over time, and will provide baseline, regional-scale information. The areas targeted for sampling were citrus groves located on soils classified as vulnerable to leaching of agricultural chemicals, and ground water in close proximity to the water table. The duration of monitoring is planned to be long term. Chemicals targeted for monitoring include selected nutrients, trace elements, and pesticides used for citrus management. Standardization of field sampling and laboratory methods, and construction of a computerized data-base repository will be important for long-term utility of the data. The proposed network design consists of existing and newly drilled wells. Existing wells were evaluated as candidates for the network based on location and well-construction specifications for water-quality monitoring. Using probability selection techniques, new well locations were selected in areas that lacked adequate existing wells. Implementation of the network will occur in phases. Quarterly sampling of 13 Phase I wells commenced in April 1999. An additional 11 Phase II wells were added to the network in April 2000. Proposed locations have been identified for 8 Phase III wells. Future topics for study include a regional water-quality analysis, a network design evaluation, and consideration of local-scale studies needed to support regional monitoring efforts. An analysis of historical water-quality data for Lake Wales Ridge, including Phase I wells, is needed for the purpose of examining trends, providing a preliminary description of spatial and short-term variability in water quality, and evaluating the proposed network design for cost effectively meeting program objectives. Local-scale, process-oriented studies are needed to provide important information for evaluating regional water-quality data. Coordination between individuals conducting such local-scale studies and those interpreting regional sampling results will be considered as a component of the network design, and will require coordination between multiple agencies.

Florida↗

Evaluating hydrological response to forecasted land-use change—scenario testing with the automated geospatial watershed assessment (AGWA) tool

Envisioning and evaluating future scenarios has emerged as a critical component of both science and social decision-making. The ability to assess, report, map, and forecast the life support functions of ecosystems is absolutely critical to our capacity to make informed decisions to maintain the sustainable nature of our ecosystem services now and into the future. During the past two decades, important advances in the integration of remote imagery, computer processing, and spatial-analysis technologies have been used to develop landscape information that can be integrated with hydrologic models to determine long-term change and make predictive inferences about the future. Two diverse case studies in northwest Oregon (Willamette River basin) and southeastern Arizona (San Pedro River) were examined in regard to future land use scenarios relative to their impact on surface water conditions (e.g., sediment yield and surface runoff) using hydrologic models associated with the Automated Geospatial Watershed Assessment (AGWA) tool. The base reference grid for land cover was modified in both study locations to reflect stakeholder preferences 20 to 60 yrs into the future, and the consequences of landscape change were evaluated relative to the selected future scenarios. The two studies provide examples of integrating hydrologic modeling with a scenario analysis framework to evaluate plausible future forecasts and to understand the potential impact of landscape change on ecosystem services.

Conference Paper↗

Ecosystem services from converted land: the importance of tree cover in Amazonian pastures

Deforestation is responsible for a substantial fraction of global carbon emissions and changes in surface energy budgets that affect climate. Deforestation losses include wildlife and human habitat, and myriad forest products on which rural and urban societies depend for food, fiber, fuel, fresh water, medicine, and recreation. Ecosystem services gained in the transition from forests to pasture and croplands, however, are often ignored in assessments of the impact of land cover change. The role of converted lands in tropical areas in terms of carbon uptake and storage is largely unknown. Pastures represent the fastest-growing form of converted land use in the tropics, even in some areas of rapid urban expansion. Tree biomass stored in these areas spans a broad range, depending on tree cover. Trees in pasture increase carbon storage, provide shade for cattle, and increase productivity of forage material. As a result, increasing fractional tree cover can provide benefits land managers as well as important ecosystem services such as reducing conversion pressure on forests adjacent to pastures. This study presents an estimation of fractional tree cover in pasture in a dynamic region on the verge of large-scale land use change. An appropriate sampling interval is established for similar studies, one that balances the need for independent samples of sufficient number to characterize a pasture in terms of fractional tree cover. This information represents a useful policy tool for government organizations and NGOs interested in encouraging ecosystem services on converted lands. Using high spatial resolution remotely sensed imagery, fractional tree cover in pasture is quantified for the municipality of Rio Branco, Brazil. A semivariogram and devolving spatial resolution are employed to determine the coarsest sampling interval that may be used, minimizing effects of spatial autocorrelation. The coarsest sampling interval that minimizes spatial dependence was about 22 m. The area-weighted fractional tree cover for the study area was 1.85 %, corrected for a slight bias associated with the coarser sampling resolution. The pastures sampled for fractional tree cover were divided between ‘high’ and ‘low’ tree cover, which may be the result of intentional incorporation of arboreal species in pasture. Further research involving those ranchers that have a higher fractional tree cover may indicate ways to promote the practice on a broader scale in the region.

Urban Ecosystems↗

Regional protocol framework for the inventory and monitoring of breeding Atlantic Coast Piping Plovers

This regional protocol provides a framework for quantifying the number of breeding pairs and productivity of Atlantic Coast piping plover (Charadrius melodus) populations during the breeding season. A primary purpose of this protocol is to standardize piping plover monitoring during the breeding season. The survey techniques described herein involve repeated visual counts of adults, nests, eggs, and chicks within a defined survey site (i.e., beach) as well as visual identification of potential threats to survival and productivity. Resulting data can be compiled and analyzed across multiple geographic units (i.e., sites, states, and recovery units) to assess progress toward recovery goals, inform local management decisions, assess management effectiveness, and improve monitoring efforts. This protocol framework was developed as part of the United States Fish and Wildlife Service (USFWS) National Wildlife Refuge System (NWRS) Inventory and Monitoring (I&M) Initiative in coordination with Ecological Services (ES) and state coordinators within the Southeast and Northeast Regions (4 and 5, respectively). Although this protocol framework is to be used primarily by NWRS to inform recovery goals, assist with local management decision-making, and meet State reporting requirements, the approach strives to assist monitoring efforts of nonNWRS partners, such as other federal agencies (e.g. National Park Service), State wildlife agencies, non-governmental organizations, and private landowners. This protocol framework and associated data management system (PIPLweb) aims to interface with existing data management and analysis tools (i.e., PIPLODES, NestStory, and PiperEx) to ensure that data collection is efficient and comparable across scales, and supports management decisions across partners. The content and structure of the protocol framework follows standards set forth in the USFWS’s How to Develop Survey Protocols: A Handbook (Version 1.0; 2013). The eight elements addressed include: introduction, sampling design, field methods, data management and analysis, reporting, personnel requirements and training, operational requirements, and references. A series of standard operating procedures (SOPs) provides greater detail on recommended methods and technical aspects of this protocol. Data entry, archival, and multi-scale analysis are handled through a secure web application (Plover Inventory and Productivity Library; PIPLweb) developed by the United States Geological Survey (USGS). When management activities and survey objectives are similar across management units, partners (Refuges, other federal agencies, State, NGOs, private) are encouraged to use this protocol framework to develop stepped-down site-specific survey protocols that include guidance for conducting on-the-ground monitoring and management plans.

Regional Protocol Framework↗

Areas of historical oil and gas exploration and production in the United States

This report contains maps and associated spatial data showing historical oil and gas exploration and production in the United States. Because of the proprietary nature of many oil and gas well databases, the United States was divided into cells one-quarter square mile and the production status of all wells in a given cell was aggregated. Base-map reference data are included, using the U.S. Geological Survey (USGS) National Map, the USGS and American Geological Institute (AGI) Global GIS, and a World Shaded Relief map service from the ESRI Geography Network. A hardcopy map was created to synthesize recorded exploration data from 1859, when the first oil well was drilled in the U.S., to 2005. In addition to the hardcopy map product, the data have been refined and made more accessible through the use of Geographic Information System (GIS) tools. The cell data are included in a GIS database constructed for spatial analysis via the USGS Internet Map Service or by importing the data into GIS software such as ArcGIS. The USGS internet map service provides a number of useful and sophisticated geoprocessing and cartographic functions via an internet browser. Also included is a video clip of U.S. oil and gas exploration and production through time.

Data Series↗

USGS Branch of Geochemistry, sample submittal manual, fourth edition

This manual is a guide for submitting geologic/geochemical/environmental samples to the USGS Branch of Geochemistry (BGC). It provides information covering a variety of subjects from required paperwork to sample size limitations. This manual supersedes Sample Submittal Manual, Third Edition, 1969, all previous sample submittal manuals, and all subsequent supplements. All samples submitted to BGC must be accompanied by a Request for Analysis Form (RFA), which may be obtained from BGC Sample Control personnel. The RFA consists of a cover sheet and coding sheet(s). Instructions for completing this form are discussed in more detail in later sections of this manual. If you have questions concerning sample submittals, please contact BGC personnel (see appendix 1 for a complete list of contacts). The branch liaison officer can assist with Information about types of analyses available, special requirements, and any other questions regarding BGC policies. Any of the branch contacts listed on page 34 will also be glad to provide assistance. A Catalog of Services is available, which briefly describes routing and analytical methods used in the BGC laboratories. More detailed information on analytical methods and laboratory procedures such as sample preparation can be found in the BGC Quality Assurance Manual. This manual is designed to acquaint you with the requirements for submitting samples, and to provide guidelines for efficient sample processing.

Open-File Report↗

Flood-inundation maps for Grand River, Red Cedar River, and Sycamore Creek near Lansing, Michigan

Digital flood-inundation maps for a total of 19.7 miles of the Grand River, the Red Cedar River, and Sycamore Creek were created by the U.S. Geological Survey (USGS) in cooperation with the City of Lansing, Michigan, and the U.S. Army Corps of Engineers. The flood-inundation maps, which can be accessed through the USGS Flood Inundation Mapping Science Web site at http://water.usgs.gov/osw/flood_inundation/ , show estimates of the areal extent and depth of flooding corresponding to selected water levels (stages) at three USGS streamgages: Grand River at Lansing, MI (04113000), Red Cedar River at East Lansing, MI (04112500), and Sycamore Creek at Holt Road near Holt, MI (04112850). Near-real-time stages at these streamgages can be obtained on the Internet from the USGS National Water Information System at http://waterdata.usgs.gov/ or the National Weather Service (NWS) Advanced Hydrologic Prediction Service at http:/water.weather.gov/ahps/ , which also forecasts flood hydrographs at all of these sites. Each set of flood profiles was computed by means of a one-dimensional step-backwater model. Each model was calibrated to the current stage-discharge relation at each streamgage and to water levels determined with stage sensors (pressure transducers) temporarily deployed along each stream reach. The hydraulic model was used to compute a set of water-surface profiles for flood stages from nearly Action Stage to above Major Flood stage, as reported by the National Weather Service. The computed water-surface profiles were then used in combination with a Geographic Information System digital elevation model derived from light detection and ranging (lidar) data to delineate the approximate areas flooded at each water level. These maps, used in conjunction with real-time USGS streamgage data and NWS forecasting, provide critical information to emergency management personnel and the public. This information is used to plan flood response actions, such as evacuations and road closures, as well as aid in postflood recovery efforts.

Michigan↗

Long lives, short futures: Freshwater turtle and tortoise imports to the United States highlight global trade and conservation challenges

Global trade of freshwater turtles and tortoises presents substantial conservation, biosecurity, and regulatory challenges, particularly for long-lived species that are already highly imperiled. While the United States has historically played a key role in supplying the international chelonian trade, investigations into its role as an importer remain limited. We used import data from the U.S. Fish and Wildlife Service Law Enforcement Management Information System (LEMIS) between 2000 and 2022 to evaluate the trade of freshwater turtles and tortoises. Over 2.5 million individuals were imported into the United States during this period, comprising 172 species that are likely imported for the pet trade, food, and traditional medicine markets. Reported annual imports for freshwater turtles increased until approximately 2013 and decreased thereafter, whereas reported annual imports for tortoises have remained relatively constant. Two species, Chinese softshell turtles ( Pelodiscus sinensis ) and Horsfield's tortoises ( Testudo horsfieldii ) represent 62.9% of all imports. Imported species were largely classified as Vulnerable, Endangered, or Critically Endangered by the IUCN Red List, yet the conservation status of a concerning number of species ( n = 45; 26.2%) has not been evaluated. Many imports appear to be sourced from wild populations (28.3% of freshwater turtles, 71.3% of tortoises); however, captive-sourced imports increased significantly over time across both groups. Import volumes raise concerns regarding the sustainability of freshwater turtle and tortoise trade, the potential for invasive species establishment, and disease spread. Our results highlight the need for updated IUCN assessments, verification of trade records, and strengthening of biosecurity screening at U.S. ports of entry.

Biological Conservation↗