USGS Science⌕ Search

SEARCH · USGS Science

Results for “Earth Science Series”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5Linked to original sources
USGS2022

Orbital and in-situ investigation of periodic bedrock ridges in Glen Torridon, Gale Crater, Mars

Wind has been the dominant agent of landscape modification on Mars for the past ~3 billion years. Among the diversity of features formed by aeolian abrasion on the surface of Mars are periodic bedrock ridges (PBRs), a relatively recently recognized class of erosional bedforms on Mars for which Earth analogues are rare. Gale crater, the field site for NASA’s Mars Science Laboratory Curiosity rover since it landed there in 2012, contains a diverse and extensive record of aeolian deposition and erosion. This study focuses on a series of periodic, linear bedrock ridges that occur within the Fe/Mg-smectite clay-bearing Glen Torridon region of Aeolis Mons (informally Mount Sharp). During Curiosity’s exploration of the Glen Torridon region between sols ~2300-3080, the rover drove through this field of ridges, providing the first opportunity for the in situ observation of these enigmatic erosional features. This study characterizes the Glen Torridon ridges using orbiter and rover data to determine their morphology, spatial distribution, compositional and material properties, and association with other aeolian features in the area. Based on these observations, the Glen Torridon ridges are interpreted to be consistent with an origin as wind-eroded periodic bedrock ridges carved during the most recent exhumation of Mount Sharp into the present-day mound. Although there is evidence for multidirectional winds in the Glen Torridon region based on the orientation of modern ripples, megaripples, TARs and other bedrock indicators, the consistent orientation of the Glen Torridon ridges, coupled with morphologic asymmetries within the ridges, support formation and elongation of the Glen Torridon PBRs forms parallel to a net regional northerly wind direction in and around Gale crater.

Journal of Geophysical Research E: Planets↗
USGS1994

Geologic studies in Alaska by the U.S. Geological Survey, 1993

This collection of 19 papers continues the annual series of U.S. Geological Survey reports on geologic investigations in Alaska. Contributions include 14 Articles and 5 shorter Geologic Notes that report results from all corners of the State. USGS activities in Alaska cover a broad spectrum of earth science topics, including the environment, hazards, resources, and geologic framework studies. Three articles focus on the environmental geochemistry of parts of south-central, west-central, and southwestern Alaska. An article on methane released from permafrost near Fairbanks and a note on paleowind direction indicators on the Arctic coastal plain contribute to ongoing climate and paleoclimate investigations. Landslide hazards in the Talkeetna Mountains and Wrangell-St. Elias National Park are discussed in two notes. Possible active fault traces near Alaska's main population center are described in an article on the Castle Mountain fault. An article on Aniakchak volcano presents evidence for a previously unrecognized catastrophic flooding event. Resources and resource assessment on gold, base metals, and coal are discussed in several articles and a note. Geologic framework studies cover tectonics, paleontology, stratigraphy, and metamorphic petrology. One contribution involves field methods; it evaluates the relative accuracy of global positioning systems and topographic map-based methods for deriving location data for field stations. Two bibliographies at the end of the volume list reports about Alaska in USGS publications released in 1993 and reports about Alaska by USGS authors in non-USGS publications in 1993.

Alaska↗
USGS2014

High-resolution digital elevation model of Mount St. Helens crater and upper North Fork Toutle River basin, Washington, based on an airborne lidar survey of September 2009

The lateral blast, debris avalanche, and lahars of the May 18th, 1980, eruption of Mount St. Helens, Washington, dramatically altered the surrounding landscape. Lava domes were extruded during the subsequent eruptive periods of 1980–1986 and 2004–2008. More than three decades after the emplacement of the 1980 debris avalanche, high sediment production persists in the North Fork Toutle River basin, which drains the northern flank of the volcano. Because this sediment increases the risk of flooding to downstream communities on the Toutle and Cowlitz Rivers, the U.S. Army Corps of Engineers (USACE), under the direction of Congress to maintain an authorized level of flood protection, built a sediment retention structure on the North Fork Toutle River in 1989 to help reduce this risk and to prevent sediment from clogging the shipping channel of the Columbia River. From September 16–20, 2009, Watershed Sciences, Inc., under contract to USACE, collected high-precision airborne lidar (light detection and ranging) data that cover 214 square kilometers (83 square miles) of Mount St. Helens and the upper North Fork Toutle River basin from the sediment retention structure to the volcano's crater. These data provide a digital dataset of the ground surface, including beneath forest cover. Such remotely sensed data can be used to develop sediment budgets and models of sediment erosion, transport, and deposition. The U.S. Geological Survey (USGS) used these lidar data to develop digital elevation models (DEMs) of the study area. DEMs are fundamental to monitoring natural hazards and studying volcanic landforms, fluvial and glacial geomorphology, and surface geology. Watershed Sciences, Inc., provided files in the LASer (LAS) format containing laser returns that had been filtered, classified, and georeferenced. The USGS produced a hydro-flattened DEM from ground-classified points at Castle, Coldwater, and Spirit Lakes. Final results averaged about five laser last-return points per square meter. As reported by Watershed Sciences, Inc., vertical accuracy is 10 centimeters (cm) at the 95-percent confidence interval on bare road surfaces; however, over natural terrain, USGS found vertical accuracy to be 10–50 cm. This USGS data series contains the bare-earth lidar data as 1- and 10-meter (m) resolution Esri grid files. Digital-elevation data can be downloaded (1m_DEM.zip and 10m_DEM.zip), as well as a 1-m resolution hillshade image with pyramids (1m_hillshade.zip). These geospatial data files require geographic information system (GIS) software for viewing.

Washington↗
USGS2015

High-resolution digital elevation model of lower Cowlitz and Toutle Rivers, adjacent to Mount St. Helens, Washington, based on an airborne lidar survey of October 2007

The lateral blast, debris avalanche, and lahars of the May 18th, 1980, eruption of Mount St. Helens, Washington, dramatically altered the surrounding landscape. Lava domes were extruded during the subsequent eruptive periods of 1980–1986 and 2004–2008. More than three decades after the emplacement of the 1980 debris avalanche, high sediment production persists in the Toutle River basin, which drains the northern and western flanks of the volcano. Because this sediment increases the risk of flooding to downstream communities on the Toutle and lower Cowlitz Rivers, the U.S. Army Corps of Engineers (USACE), under the direction of Congress to maintain an authorized level of flood protection, continues to monitor and mitigate excess sediment in North and South Fork Toutle River basins to help reduce this risk and to prevent sediment from clogging the shipping channel of the Columbia River. From October 22–27, 2007, Watershed Sciences, Inc., under contract to USACE, collected high-precision airborne lidar (light detection and ranging) data that cover 273 square kilometers (105 square miles) of lower Cowlitz and Toutle River tributaries from the Columbia River at Kelso, Washington, to upper North Fork Toutle River (below the volcano's edifice), including lower South Fork Toutle River. These data provide a digital dataset of the ground surface, including beneath forest cover. Such remotely sensed data can be used to develop sediment budgets and models of sediment erosion, transport, and deposition. The U.S. Geological Survey (USGS) used these lidar data to develop digital elevation models (DEMs) of the study area. DEMs are fundamental to monitoring natural hazards and studying volcanic landforms, fluvial and glacial geomorphology, and surface geology. Watershed Sciences, Inc., provided files in the LASer (LAS) format containing laser returns that had been filtered, classified, and georeferenced. The USGS produced a hydro-flattened DEM from ground-classified points at Castle and Coldwater Lakes. Final results averaged about two laser last-return points per square meter. As reported by Watershed Sciences, Inc., vertical accuracy is 10 centimeters (cm) at the 95-percent confidence interval on bare road surfaces; however, over natural terrain, USGS found vertical accuracy to be 10–50 cm. This USGS data series contains the bare-earth lidar data as 1- and 10-meter (m) resolution Esri grid files. Digital-elevation data can be downloaded (1m_DEM.zip and 10m_DEM.zip), as well as a 1-m resolution hillshade image with pyramids (1m_hillshade.zip). These geospatial data files require geographic information system (GIS) software for viewing.

Washington↗
USGS2005

Advanced Very High Resolution Radiometer Normalized Difference Vegetation Index Composites

The Advanced Very High Resolution Radiometer (AVHRR) is a broad-band scanner with four to six bands, depending on the model. The AVHRR senses in the visible, near-, middle-, and thermal- infrared portions of the electromagnetic spectrum. This sensor is carried on a series of National Oceanic and Atmospheric Administration (NOAA) Polar Orbiting Environmental Satellites (POES), beginning with the Television InfraRed Observation Satellite (TIROS-N) in 1978. Since 1989, the United States Geological Survey (USGS) Center for Earth Resources Observation and Science (EROS) has been mapping the vegetation condition of the United States and Alaska using satellite information from the AVHRR sensor. The vegetation condition composites, more commonly called greenness maps, are produced every week using the latest information on the growth and condition of the vegetation. One of the most important aspects of USGS greenness mapping is the historical archive of information dating back to 1989. This historical stretch of information has allowed the USGS to determine a 'normal' vegetation condition. As a result, it is possible to compare the current week's vegetation condition with normal vegetation conditions. An above normal condition could indicate wetter or warmer than normal conditions, while a below normal condition could indicate colder or dryer than normal conditions. The interpretation of departure from normal will depend on the season and geography of a region.

Fact Sheet↗
USGS2018

Patterns, pace and processes of water-quality variability: Examples from a long-studied estuary

Environmental time series have rich information content that is invaluable for measuring and understanding changes over time and guiding policies to manage change. I extracted information from measurements of 10 water‐quality constituents in upper San Francisco Bay from 1975 to 2016, one of the longest observational records in a U.S. estuary. Changes were detected at every time scale captured by monthly sampling. Long‐term trends included increased ammonium (+53%), nitrate + nitrate (+50%), silicate (+14%), Secchi depth (+42%), and decreased chlorophyll a (Chl a ) (−74%) and suspended particulate matter (−45%). Changes at the decadal scale included abrupt shifts (Chl a , nitrate + nitrite) and oscillations between shorter trends of increase and decrease (Secchi depth, phosphate). Long‐term trends were not expressed equally across all seasons, and seasonal patterns of change varied across constituents. These examples illustrate key features of environmental variability at the land–sea interface: (1) water‐quality components change continually at time scales from months to decades; (2) patterns of seasonal, multiyear, and multidecadal change are complex and vary across constituents; (3) primary drivers of change are freshwater inflow, the master regulator of estuarine dynamics, and human activities such as river damming, water diversions, wastewater discharge, environmental policies, and species introductions; (4) extracting the full information content of time series requires multiple analyses, each revealing a different layer of insight into how changes develop over time; (5) water‐quality variability is nonstationary, so future changes cannot be forecast reliably; (6) repeated observation is an essential method of Earth system science with applications in the design and performance measures of environmental policies.

California↗
USGS2004

A geometric performance assessment of the EO-1 advanced land imager

The Earth Observing 1 (EO-1) Advanced Land Imager (ALI) demonstrates technology applicable to a successor system to the Landsat Thematic Mapper series. A study of the geometric performance characteristics of the ALI was conducted under the auspices of the EO-1 Science Validation Team. This study evaluated ALI performance with respect to absolute pointing knowledge, focal plane sensor chip assembly alignment, and band-to-band registration for purposes of comparing this new technology to the heritage Landsat systems. On-orbit geometric calibration procedures were developed that allowed the generation of ALI geometrically corrected products that compare favorably with their Landsat 7 counterparts with respect to absolute geodetic accuracy, internal image geometry, and band registration.

IEEE Transactions on Geoscience and Remote Sensing↗
USGS1993

Impact-shocked zircons: Discovery of shock-induced textures reflecting increasing degrees of shock metamorphism

Textural effects specifically characteristic of shock metamorphism in zircons from impact environments have not been reported previously. However, planar deformation features (PDF) due to shock metamorphism are well documented in quartz and other mineral grains from these same environments. An etching technique was developed that allows SEM visualization of PDF and other probable shock-induced textural features, such as granular (polycrystalline) texture, in zircons from a variety of impact shock environments. These textural features in shocked zircons from K/T boundary distal ejecta form a series related to increasing degrees of shock that should correlate with proportionate resetting of the UPb isotopic system.

Earth and Planetary Science Letters↗
USGS2001

U.S. Geological Survey Appalachian region integrated science workshop proceedings, Gatlinburg, Tennessee, October 22-26, 2001

Some of nature's most magnificent creations on Earth are the picturesque landscape and the terrestrial and aquatic inhabitants of the Appalachian Mountains of the Eastern United States. Mother Nature has been kind to the region but man, often, has not. The Appalachian mountains and valleys have been home to a variety of human cultures, dating back approximately 12,000 years. A series of Native American peoples, including most recently the Cherokee Nation, inhabited the region prior to European settlement which began in the 1600's. All of these peoples have had the desire to reap the benefits of the land. Current and historic use of the land ranges from mineral extraction to agricultural development to timber production to industrial and residential development, all of which have now threatened the landscape. Many individuals and organizations desire to save the awe and beauty of the Appalachians for the generations to come, in a way that is environmentally and economically sustainable. They have tried for years to raise alarms that this area is threatened and worth the attention of all who are interested in an effort of restitution and preservation. Residents, environmental groups, land managers, scientists, business groups, and the multitude of visitors who pass through the national parks and other public lands located within the Appalachians have raised these same alarms. There is a need to not only identify the issues resulting from anthropogenic pressures on the landscape, but also to collect the information and conduct the science that will allow land managers and policy makers to become better informed and better able to execute their responsibilities.

Appalachia↗
USGS2022

Fundamental science and engineering questions in planetary cave exploration

Nearly half a century ago, two papers postulated the likelihood of lunar lava tube caves using mathematical models. Today, armed with an array of orbiting and fly-by satellites and survey instrumentation, we have now acquired cave data across our solar system—including the identification of potential cave entrances on the Moon, Mars, and at least six other planetary bodies. These discoveries gave rise to the study of planetary caves. To help advance this field, we leveraged the expertise of an interdisciplinary group to identify a strategy to explore caves beyond Earth. Focusing primarily on astrobiology, the cave environment, geology, robotics, instrumentation, and human exploration, our goal was to produce a framework to guide this subdiscipline through at least the next decade. To do this, we first assembled a list of 198 science and engineering questions. Then, through a series of social surveys, 114 scientists and engineers winnowed down the list to the top 53 highest priority questions. This exercise resulted in identifying emerging and crucial research areas that require robust development to ultimately support a robotic mission to a planetary cave—principally the Moon and/or Mars. With the necessary financial investment and institutional support, the research and technological development required to achieve these necessary advancements over the next decade are attainable. Subsequently, we will be positioned to robotically examine lunar caves and search for evidence of life within martian caves; in turn, this will set the stage for human exploration and potential habitation of both the lunar and martian subsurface.

JGR Planets↗
USGS2014

Topographic lidar survey of Dauphin Island, Alabama and Chandeleur, Stake, Grand Gosier and Breton Islands, Louisiana, July 12-14, 2013

This Data Series Report contains lidar elevation data collected on July 12 and 14, 2013, for Dauphin Island, Alabama, and Chandeleur, Stake, Grand Gosier and Breton Islands, Louisiana. Classified point cloud data—data points described in three dimensions—in lidar data exchange format (LAS) and bare earth digital elevation models (DEMs) in ERDAS Imagine raster format (IMG) are available as downloadable files. Photo Science, Inc., was contracted by the U.S. Geological Survey (USGS) to collect and process these data. The lidar data were acquired at a horizontal spacing (or nominal pulse spacing) of 1 meter (m) or less. The USGS surveyed points within the project area from July 14–23, 2013, for use in ground control and accuracy assessment. Photo Science, Inc., calculated a vertical root mean square error (RMSEz) of 0.012 m by comparing 10 surveyed points to an interpolated elevation surface of unclassified lidar data. The USGS also checked the data using 80 surveyed points and unclassified lidar point elevation data and found an RMSEz of 0.073 m. The project specified an RMSEz of 0.0925 m or less. The lidar survey was acquired to document the short- and long-term changes of several different barrier island systems. Specifically, this survey supports detailed studies of Chandeleur and Dauphin Islands that resolve annual changes in beaches, berms and dunes associated with processes driven by storms, sea-level rise, and even human restoration activities. These lidar data are available to Federal, State and local governments, emergency-response officials, resource managers, and the general public.

Alabama;Louisiana↗
USGS2024

System characterization report on the Gaofen-6

Executive Summary Gaofen-6 represents a series of Chinese high-resolution Earth observation satellites. More than 12 satellites have been launched in the Gaofen series, beginning with Gaofen-1 in 2013. Satellites within the series have varying infrared, radar, and optical imaging capabilities. The primary goal for the satellites in this series is to provide near real-time observations for climate change monitoring, geographical mapping, precision agriculture support, environmental and resource surveying, and disaster prevention. More information on Chinese satellites and sensors is available in the “2022 Joint Agency Commercial Imagery Evaluation—Remote Sensing Satellite Compendium.” The Earth Resources Observation and Science Cal/Val Center of Excellence system characterization team completed data analyses to characterize the geometric (interior and exterior), radiometric, and spatial performances of Gaofen-6. Results of these analyses indicate that Gaofen-6 has an interior geometric performance root mean square error ranging from 2.84 meters (m; 0.18 pixel) to 7.42 m (0.46 pixel) in easting and from 2.84 m (0.18 pixel) to 11.57 m (0.72 pixel) in northing in band-to-band registration, an exterior geometric performance root mean square error ranging from 154.50 m (8.80 pixels) in easting to 14.65 m (0.80 pixel) in northing in comparison to a corresponding Sentinel-2 scene, a radiometric performance ranging from 0.018 to 0.055 (in offset) and from 0.620 to 0.858 (in slope), and a spatial performance ranging from 2.10 to 2.30 pixels at full width at half maximum, with a modulation transfer function at a Nyquist frequency ranging from 0.040 to 0.055.

Open-File Report↗
USGS2015

EverVIEW: a visualization platform for hydrologic and Earth science gridded data

The EverVIEW Data Viewer is a cross-platform desktop application that combines and builds upon multiple open source libraries to help users to explore spatially-explicit gridded data stored in Network Common Data Form (NetCDF). Datasets are displayed across multiple side-by-side geographic or tabular displays, showing colorized overlays on an Earth globe or grid cell values, respectively. Time-series datasets can be animated to see how water surface elevation changes through time or how habitat suitability for a particular species might change over time under a given scenario. Initially targeted toward Florida's Everglades restoration planning, EverVIEW has been flexible enough to address the varied needs of large-scale planning beyond Florida, and is currently being used in biological planning efforts nationally and internationally.

Computers & Geosciences↗
USGS1997

U-Pb zircon date from Avalonian Cape Breton Island and geochronologic calibration of the early Ordovician

A U–Pb zircon date of 483 ± 1 Ma is recorded from an uppermost Tremadoc K-bentonite from the Chesley Drive Group on McLeod Brook, eastern Cape Breton Island. The associated fauna, with the trilobite Peltocare rotundifrons , is also known from the Reversing Falls section in Saint John, New Brunswick, and the traditional reference of the latter section to the Arenig is incorrect. A 483 ± 1 Ma age is significantly older than a U – Pb zircon age reported from the classical base of the Arenig Series in north Wales and about 10 Ma older than strata regarded herein as upper Arenig in central Newfoundland. If the global standard for the base of the Arenig is defined at the Tetragraptus approximatus Zone base, then the base of the type Arenig in Wales is younger than the latter horizon. The McLeod Brook occurrence is from an uppermost Tremadoc (Hunnebergian Stage) interval that has been removed below the unconformity in north Wales. The age of the Tremadoc –Arenig series boundary remains uncertain; however, a tentative estimate that it is significantly younger than 483 Ma is suggested by fossil evidence.

Nova Scotia↗
USGS2024

Concept of a satellite cross-calibration radiometer for in-orbit calibration of commercial optical satellites

The satellite Earth observation (EO) sector is burgeoning with hundreds of commercial satellites being launched each year, delivering a rich source of data that could be exploited for societal benefit. Data streams from the growing number of commercial satellites are of variable quality, limiting the potential for their combined use in science applications that need long time-series data from multiple sources. The quality of calibration performed on optical sensors onboard many satellite systems is highly variable due to calibration methods, sensor design, mission objective, budget, or other operational constraints. A small number of currently operating well-characterised satellite systems with onboard calibration, such as Landsat-8/9 and Sentinel-2, and planned future missions, like the NASA Climate Absolute Radiance and Refractivity Observatory (CLARREO) Pathfinder, the European Space Agency (ESA)’s Traceable Radiometry Underpinning Terrestrial and Helio Studies (TRUTHS), and LIBRA from China, are considered benchmarks for optical data quality due to their traceability to international measurement standards. This paper describes the concept of a space-based transfer calibration radiometer called the Satellite Cross-Calibration Radiometer (SCR) that would enable the calibration parameters from satellites such as Landsat-8/9, Sentinel-2, or other benchmark systems to be transferred to a range of commercial optical EO satellite systems while in orbit. A description of the key characteristics of the SCR to successfully operate in orbit and transfer calibration from reference systems to client systems is presented. A system like the SCR in orbit could complement SI-Traceable satellites (SITSats) to improve data quality and consistency and facilitate the interoperable use of data from multiple optical sensor systems for delivering higher returns on the global investment in EO.

Remote Sensing↗