USGS Science⌕ Search

SEARCH · USGS Science

Results for “The Holocene”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 883 records · Page 49Linked to original sources
USGS2003

Geologic map of the Rio Puerco quadrangle, Bernalillo and Valencia Counties, New Mexico

The Rio Puerco quadrangle is located southwest of Albuquerque in central New Mexico and covers part of the western part of the Isleta Reservation. The U.S. Geological Survey, the New Mexico Bureau of Geology and Mineral Resources, and the University of New Mexico have conducted geologic mapping on the Isleta Reservation and vicinity as part of the Middle Rio Grande Basin Project. The map area contains surficial deposits, calcic soils, fluvial deposits of the Rio Puerco, deposits of the Santa Fe Group, and three volcanic fields. The area is characterized by predominantly north-trending normal faults with generally down-to-the-east movement. Post-Santa Fe Group deposits are composed of surficial deposits (Pleistocene-Holocene) and fluvial deposits of the Rio Puerco (Pleistocene-Holocene). The surficial deposits are divided into eolian, alluvial, colluvial, and landslide deposits. The fluvial deposits of the Rio Puerco consist of four terrace and present channel deposits. The Santa Fe Group is divided into lower and upper parts. The lower part of the Santa Fe Group is exposed near the southwestern corner of the study area where deposits consist of reddish-brown mudstone and sandstone correlated to the Popotosa Formation (Unit 1) of Lozinsky and Tedford (1991). They interpreted deposition of the unit in a basin-floor playa setting. The Popotosa Formation is in fault contact to the east with deposits of the upper Santa Fe Group. The upper Santa Fe Group is derived from major tributary fluvial systems (ancestral Rio Puerco Puerco and possibly the Rio San Jose drainages) draining the adjacent Colorado Plateau and Sierra Nacimiento and correlated to parts of Kelley's (1977) Ceja Formation of the Santa Fe Group and equivalent to Machette's (1978) Sierra Ladrones Formation, Connell's Arroyo Ojito Formation (Connell and others, 1999, and Maldonado's lithofacies of the Isleta Reservation (Maldonado and Atencio,1998a, b). The group also locally includes a fine- grained unit (lower Pleistocene) referred to here as the sand, silt, and clay of Chavez Grant (Qsc). The Ceja Formation of the Santa Fe Group as defined here is divided into the following units in descending stratigraphic order: (1) upper sand and gravel unit (upper Pliocene), (2) middle silt, sand, and clay unit (upper Pliocene), and (3) lower sand and gravel unit (Pliocene). The three volcanic fields in the map area are: (1) basalt of Cat Hills, dated at 98-110 ka and composed of seven lava flows and four cinder cones; the flows overlie calcic soils that overlie the upper sand and gravel unit of the Ceja Formation; (2) lava flow of Cat Mesa, dated at about 3 Ma and interfingers with the upper part of the Ceja Formation; (3) diabase of Mohinas Mountain, dated at 8.3 Ma (Baldridge and others, 1987) and intrudes the Popotosa Formation. Numerous high-angle faults cut the area but are mostly buried. The faults generally trend north but deviate to the northwest and northeast. The major normal faults are the Cat Mesa and Mohinas Mountain faults.

Miscellaneous Field Studies Map↗
USGS2007

Surficial sediment character of the New York-New Jersey offshore continental shelf region: A GIS compilation

Broad continental shelf regions such as the New York Bight are the product of a complex geologic history and dynamic oceanographic processes, dominated by the Holocene marine transgression (>100 m sea-level rise) following the end of the last Pleistocene ice advance ~ 20,000 years ago. The area of the U.S. Exclusive Economic Zone (U.S. EEZ) territory, extending 200 nautical miles seaward from the coast, is larger than the continental U.S. and contains submerged landforms that provide a variety of natural functions and societal benefits, such as: critical habitats for fisheries, ship navigation and homeland security, and engineering activities (i.e. oil and gas platforms, pipeline and cable routes, potential wind-energy-generation sites). Some parts of the continental margins, particularly inner-continental shelf regions, also contain unconsolidated hard-mineral deposits such as sand and gravel that are regarded as potential aggregate resources to meet or augment needs not met by onshore deposits (Williams, 1992). The present distribution of surficial sediment off the northeastern United States is shaped from the deposits left by the last glaciation and reflects the cumulative effects of sediment erosion, transport, sorting, and deposition by storm and tidal processes during the Holocene rise in sea level. As a result, the sediments on the sea floor represent both an historical record of former conditions and a guide to possible future sedimentary environments. The U.S. Geological Survey (USGS) through the Coastal and Marine Geology Program, in cooperation with the University of Colorado and other partners, has compiled extant sediment character and textural data as well as other geologic information on the sea floor from all regions around the U.S. into the usSEABED data system (Reid and others, 2005; Buczkowski and others, 2006; Reid and others, 2006). The usSEABED system, which contains information on sediment grain size and lithology for more than 340,500 stations within the U.S. EEZ. has been developed and populated with data as part of the USGS Marine Aggregate Resources and Processes and the National Benthic Habitats projects in order to provide the base-line data needed to update the current maps of offshore surficial geologic character and sediment distribution. The maps are also used to characterize benthic sea floor environments important for marine ecosystems. U.S. Geological Survey, Data Series 118 (Reid and others, 2005), of the usSEABED data release series, represents the combined efforts of the USGS and several other government agencies to provide a unified resource for accessing and preserving records of U.S. east coast sea floor geologic information and sediment texture data. For this present report, we have chosen to focus on the New York-New Jersey region, an area that has been intensely studied by the USGS for many years to address many complex issues. This report illustrates the uses of the usSEABED database for GIS applications, while offering additional insight into the resources and data available from the USGS and its collaborative institutions. This report is based on data contained in U.S. Geological Survey Data Series 118 (Reid and others, 2005) and shows an assortment of example GIS products that are possible using usSEABED. All data are intended to be GIS-ready and should not require any additional cleanup, formatting, or renaming of fields in order to use the data in a Geographic Information System. This project employs the Environmental Systems Research Institute's (ESRI) ArcView™ software. Many of these maps were made as part of the ongoing USGS study to assess marine aggregate resources offshore New York and New Jersey, but these maps can serve many other purposes. The marine science community, educators, students and others are encouraged to use these data to generate GIS products for their own purposes. The objectives of the Marine Aggregate Resources and Processes project are to produce a series of new geologic maps and reports of the sea floor that will provide scientific insights into the character and geologic development of U.S. continental margins and to use these maps and information to assess the potential availability of offshore sand and gravel resources. The mapping and aggregate resource assessments are being conducted on a national scale using the usSEABED data base as described in Williams and others (2003). Potential uses for these data include: (1) defining the geological variability of the sea floor in relation to benthic habitat diversity; (2) improving our understanding of the processes that control the distribution and transport of bottom sediments and benthic habitats; (3) locating aggregate resources for beach nourishment and industrial applications; and (4) providing a detailed geospatial framework for future marine science research, monitoring, and management activities. The initial assessments are in progress for the New York Bight and Louisiana offshore areas.

New Jersey, New York↗
USGS2007

Antarctic ice-rafted detritus (IRD) in the South Atlantic: Indicators of iceshelf dynamics or ocean surface conditions?

Ocean sediment core TN057-13PC4/ODP1094, from the Atlantic sector of the Southern Ocean, contains elevated lithogenic material in sections representing the last glacial period compared to the Holocene. This ice-rafted detritus is mainly comprised of volcanic glass and ash, but has a significant input of what was previously interpreted as quartz during peak intervals (Kanfoush et al., 2000, 2002). Our analysis of these clear mineral grains indicates that most are plagioclase, and that South Sandwich Islands is the predominant source, similar to that inferred for the volcanic glass (Nielsen et al., in review). In addition, quartz and feldspar with possible Antarctic origin occur in conjunction with postulated episodes of Antarctic deglaciation. We conclude that while sea ice was the dominant ice rafting agent in the Polar Frontal Zone of the South Atlantic during the last glacial period, the Holocene IRD variability may reflect Antarctic ice sheet dynamics.

Open-File Report↗
USGS2007

Preliminary Geologic Map of the Sanchez Reservoir Quadrangle and Eastern Part of the Garcia Quadrangle, Costilla County, Colorado

This geologic map is based entirely on new mapping by Thompson and Machette, whereas the geophysical data and interpretations were supplied by Drenth. The map area includes most of San Pedro Mesa, a basalt covered mesa that is uplifted as a horst between the Southern Sangre de Cristo fault zone (on the west) and the San Luis fault zone on the east. The map also includes most of the Sanchez graben, a deep structural basin that lies between the San Luis fault zone (on the west) and the Central Sangre de Cristo fault zone on the east. The oldest rocks in the map area are Proterozoic granites and Paleozoic sedimentary rocks, which are only exposed in a small hill on the west-central part of the mesa. The low hills that rise above San Pedro mesa are comprised of middle(?) Miocene volcanic rocks that are undated, but possibly correlative with mapped rocks to the east of Sanchez Reservoir. The bulk of the map area is comprised of the Servilleta Basalt, a regional series of flood basalts of Pliocene age. The west, north, and northeast margins of the mesa are covered by extensive landslide deposits that rest on poorly exposed sediment of the Santa Fe Group. Rare exposures of the sediment are comprised of siltstones, sandstones, and minor fluvial conglomerates. Most of the low ground surrounding the mesa is covered by surficial deposits of Quaternary age. The piedmont alluvium is subdivided into three Pleistocene units, and three Holocene units. The oldest Pleistocene gravel (unit Qao) forms an extensive coalesced alluvial fan and piedmont surface that is known as the Costilla Plains. This surface extends west from San Pedro Mesa to the Rio Grande. The primary geologic hazards in the map are are from earthquakes and landslides. There are three major fault zones in the area (as discussed above), and they all show evidence for late Pleistocene to possible Holocene movement. Two generations of landslides are mapped (younger and older), and both may have seismogenic origins.

Open-File Report↗
USGS2009

Logs of paleoseismic excavations across the Central Range Fault, Trinidad

This publication makes available maps and trench logs associated with studies of the Central Range Fault, part of the South American-Caribbean plate boundary in Trinidad. Our studies were conducted in 2001 and 2002. We mapped geomorphic features indicative of active faulting along the right-lateral, Central Range Fault, part of the South American-Caribbean plate boundary in Trinidad. We excavated trenches at two sites, the Samlalsingh and Tabaquite sites. At the Samlalsingh site, sediments deposited after the most recent fault movement bury the fault, and the exact location of the fault was unknown until we exposed it in our excavations. At this site, we excavated a total of eleven trenches, six of which exposed the fault. The trenches exposed fluvial sediments deposited over a strath terrace developed on Miocene bedrock units. We cleaned the walls of the excavations, gridded the walls with either 1 m X 1 m or 1 m X 0.5 m nail and string grid, and logged the walls in detail at a scale of 1:20. Additionally, we described the different sedimentary units in the field, incorporating these descriptions into our trench logs. We mapped the locations of the trenches using a tape and compass. Our field logs were scanned, and unit contacts were traced in Adobe Illustrator. The final drafted logs of all the trenches are presented here, along with photographs showing important relations among faults and Holocene sedimentary deposits. Logs of south walls were reversed in Illustrator, so that all logs are drafted with the view direction to the north. We collected samples of various materials exposed in the trench walls, including charcoal samples for radiocarbon dating from both faulted and unfaulted deposits. The locations of all samples collected are shown on the logs. The ages of seventeen of the charcoal samples submitted for radiocarbon analysis at the University of Arizona Accelerator Mass Spectrometry Laboratory in Tucson, Ariz., are given in Table 1. Samples found in Table 1 are shown in red on the trench logs. All radiocarbon ages are calibrated and given with 2 standard deviation age ranges. Our studies suggest that the Central Range Fault is a Holocene fault capable of producing damaging earthquakes in Trinidad

Open-File Report↗
USGS2015

The relationship between the ratio of strontium to calcium and sea-surface temperature in a modern Porites astreoides coral: Implications for using P. astreoides as a paleoclimate archive

An inverse relationship has been demonstrated between water temperature and the ratio of strontium to calcium (Sr/Ca) in coral aragonite for a number of Pacific species of the genus Porites . This empirically determined relationship has been used to reconstruct past sea-surface temperature (SST) from modern and Holocene age coral archives. A study was conducted to investigate this relationship for Porites astreoides to determine the potential for using these corals as a paleotemperature archive in the Caribbean and western tropical Atlantic Ocean. Skeletal aragonite from a P. astreoides colony growing offshore of the southeast coast of Florida was subsampled with a mean temporal resolution of 14 samples per year and analyzed for Sr/Ca. The resulting Sr/Ca time series yielded well-defined annual cycles that correspond to annual growth bands in the coral. Sr/Ca was regressed against a monthly SST record from C-MAN buoy station FWYF1 (located at Fowey Rocks, Florida), resulting in the following Sr/Ca-SST relationship: Sr/Ca = –0.040*SST + 10.128 (R = –0.77). A 10-year time series of Sr/Ca-derived SST yields annual cycles with a 10–12 degree Celsius seasonal amplitude, consistent with available local instrumental records. We conclude that Sr/Ca in Porites astreoides from the Caribbean/Atlantic region has high potential for developing subannually resolved modern and recent Holocene SST records.

Florida↗
USGS2022

Photomosaics and logs associated with study of West Napa Fault at Ehlers Lane, north of Saint Helena, California

The West Napa Fault has previously been mapped as extending ~45 kilometers (km) from northern Vallejo to southern Saint Helena, California, dominantly running along the western edge of Napa Valley. A zone of fault strands (some previously unmapped) along a ~15-km section of the fault ruptured during the 2014 magnitude 6.0 South Napa earthquake, illustrating the need for further investigation of this little-studied structure. Based on light detection and ranging (lidar) topography and field examination, the fault zone likely extends an additional 10 km or more northward past Saint Helena. In this vicinity, geomorphology suggests two fault strands, one along the range front and another associated with a line of rounded hills that rise 5–10 meters above the middle of the valley. In 2017, we excavated two trenches across an apparent fault scarp on the east side of one elongate hill near Ehlers Lane north of Saint Helena. Examination of the walls revealed three main sedimentary packages. The oldest package, weakly lithified alluvial fan gravels with local sand and silt layers, is tilted 25°–35° to the west. Overlying these tilted strata are two younger sets of strata. On the west side, underlying the crest of the scarp, are alluvial fan gravels with local sand and silt lenses, potentially tilted a few degrees to the west. On the east side, deposited against the scarp, are much finer grained (dominantly fine sand to silt) subhorizontal fluvial strata, likely overbank deposits from the Napa River. We obtained age control on the two younger units through a combination of radiocarbon, infrared-stimulated luminescence, and obsidian hydration dating, establishing that they are latest Pleistocene to modern in age. Although there are no prominent unconformities within the alluvial fan sediments, sample dating indicates there are two generations, one in the 10–20 thousand year (ka) age range and one in the <3 ka age range. Owing to a general lack of well-defined laterally continuous alluvial fan units, it is difficult to distinguish contacts between the two generations except in the immediate proximity of dated samples. The river sediments approximately span the Holocene. No faults were apparent in either trench, indicating that any fault related to the observed surface deformation has not ruptured to the surface at this site during the Holocene and is likely blind.

California↗
USGS1976

A preliminary evaluation of selected earthquake-related geologic hazards in the Kenai Lowland, Alaska

Several major faults exist beneath the Kenai Lowland, and others may be inferred. No surface evidence was found to indicate that any of the faults have been active in Holocene time. The sparse shallow seismicity thus far recorded does not correlate with known faults, nor does it define linear trends suggestive of faulting. Tidal flats at the mouths of the Kenai, Kasilof, and Chickaloon Rivers have been uplifted in the Holocene, however, and the uplift may reflect growing anticlines at depth. Some faults associated with folding may be active, but they are probably too limited in size to generate destructive earthquakes. They could, however, constitute a hazard to manmade structures in their immediate vicinity. Vibrational damage and ground failure during the 1964 earthquake were most extensive north of Tustumena Lake in areas of water-saturated unconsolidated deposits with uneven topography. South of Tustumena Lake, damage resulted mainly from landslides formed along unconfined bluffs and riverbanks, and from submarine sliding and subsidence at Homer Spit. A comparable distribution of surficial effects may be anticipated in future large earthquakes on the Kenai Lowland.

Alaska↗
USGS1977

Paleomagnetic investigation of late Quaternary sediments of south San Francisco Bay, California

Paleomagnetic inclinations of the Late Quaternary sediments of South San Francisco Bay were determined from bore hole samples collected near Dumbarton Bridge. The sediments consist of estuarine muds and nonmarine sand deposits, floored by bedrock of the Mesozoic Franciscan Formation. - Beneath Dumbarton Bridge the entire sedimentary fill is normally polarized; therefore, the fill postdates the Brunhes-Matayama polarity reversal (700,000 y. B.P.). Magnetic time lines such as the Mono Lake excursion (24,000 y. B.P.) and the reversed Blake event (110,000 y B.P.) were not found in this bore hole. In addition to Holocene and modern deposits of San Francisco Bay, an older estuarine unit occurs in the stratigraphic section. The older unit was deposited during a period of high sea level, tentatively correlated with the Sangamon interglacial period. Because evidence of the Blake event is not present in the older estuarine unit, the proposed age of this unit could not be confirmed. Although the Holocene estuarine deposits of South San Francisco Bay carry stable remanent magnetization, a reliable record of geomagnetic secular variation could not be recovered because the water-saturated sdiment was deformed by drilling.

California↗
USGS1977

Geology of the Monterey Bay region

Geophysical data and sea floor samples collected from the continental shelf and slope between Ano Nuevo Point and Point Sur, California indicate that the Monterey Bay region has had a complex late Cenozoic tectonic history. Uplift and depression have produced a succession of regressive and transgressive sedimentary units, while contemporaneous right-slip along faults of the San Andreas system have offset major structural and lithologic elements. This deformation produced three regional and several local unconformities within upper Tertiary rocks and initiated development of a canyon system that today includes the Monterey, Ascension, Carmel, and other large submarine canyons. The Tertiary stratigraphy of the offshore Monterey Bay area is divided into two provinces by a major structural boundary, the north-trending Palo Colorado-San Gregorio fault zone. East of this zone in the offshore are four seismically distinct sequences that can be correlated with major sequences onshore. These sequences comprise (1) pre-Tertiary basement, and (2) middle Miocene, (3) upper Miocene to Pliocene, and (4) upper Pliocene to Holocene sedimentary intervals. Each of the latter three sequences is bounded by unconformities, as is its counterpart on land. Only Neogene sedimentary rocks are present offshore; Paleogene units, if originally present, have been removed completely by pre-middle Miocene erosion. An extensive erosional surface was cut during Zemorrian time into the late Mesozoic granitic basement rocks. Incised into this surface are the ancestral Monterey Canyon and an unnamed canyon. Marine sedimentary rocks of upper Miocene and Pliocene age overlie this unconformably and fill the unnamed canyon. Similar rocks also may have once filled Monterey Canyon. Near shore these strata are covered by terrestrial alluvial and eolian deposits, deltaic deposits, marine canyon fill, landslide and slump deposits, and unconsolidated sediments that range in age from upper Pliocene to Holocene. Monterey Canyon appears to have been filled and exhumed at least twice since its inception in Oligocene time, once in late Miocene and once in Pleistocene time. Three major seismic stratigraphic units are apparent in continuous seismic reflection profiles from the offshore area west of the Palo Colorado-San Gregorio fault zone. These are (1) acoustical basement, and (2) middle Tertiary and (3) late Tertiary to Quaternary sedimentary intervals. Acoustical basement comprises Cretaceous to early Tertiary sedimentary rocks, Mesozoic or older metamorphic rocks, and Cretaceous or Jurassic rocks of the Franciscan assemblage. The middle Tertiary sequence consists of sedimentary rocks of questionable Miocene age. The late Tertiary to Quaternary sequence is composed of Pliocene sedimentary rocks and unconsolidated marine sediments, and submarine landslide and slump deposits. Seismic reflection surveys indicate two major, intersecting, northwest-trending fault zones to be present in the offshore Monterey Bay area. The Palo Colorado-San Gregorio fault zone may be more than 200 km long; it is narrow (approximately 3 km wide) and is represented in most places by one or two faults. This zone appears to connect with faults mapped on land near Ano Nuevo Point and Point Sur. The Monterey Bay fault zone, located in the area between Santa Cruz and Monterey, is a diffuse zone, approximately 10 to 15 km wide, of en echelon faults. Faults within this zone appear to connect with faults on land near Monterey, and the zone appears to be truncated by the Palo Colorado-San Gregorio fault zone west of Santa Cruz. Locations of more than 110 earthquakes (1968-1976) show that the newly mapped fault zones in Monterey Bay are seismically active. Epicenters in the bay form two clusters, one at the intersection of the Monterey Bay and Palo Colorado-San Gregorio fault zones, and the other in a linear belt that trends northwest along the Palo Colorado-San Gregorio fault zone. Faults within th

California↗
USGS1982

Late Cenozoic stratigraphy and structure of the western margin of the central San Joaquin Valley, California

Late Cenozoic Stratigraphy Late Cenozoic deposits in the west-central San Joaquin Valley and adjacent foothills of the Diablo Range consist mainly of unconsolidated, poorly-sorted to well-sorted gravel, sand, silt and clay derived primarily from the Diablo Range and secondarily from the Sierra Nevada. Sedimentary structures, such as channeled contacts, laminated bedding, cross-stratification and clast-imbrication indicate that most of the deposits were transported and laid down by running water. These deposits are described and their facies relationships are illustrated in the 'Late Cenozoic Stratigraphy' section of this report (see Figures 17, and 26, and Table 9). Sediment shed from the Diablo Range accumulated primarily as a complex of coalescing alluvial fans on the piedmont slope of a San Joaquin Valley that at one time extended across the foothill belt to the present margin of the central Diablo Range; and as local fills within stream valleys of the Diablo Range foothills tributary to the San Joaquin Valley. These deposits are well exposed in Interstate-5 roadcuts, California Aqueduct and Delta-Mendota canal cuts, and stream banks along the many ephemeral and intermittent streams draining the Diablo Range. Sediment derived from the Sierra Nevada is confined primarily to the floodbasin of the San Joaquin Valley. It includes arkosic riverine and floodbasin deposits from the San Joaquin River and associated sloughs, as well as local ephemeral and perennial pond, swamp, oxbow-lake and lake deposits. These deposits are well-exposed in stream banks of the San Joaquin River and a few of the larger sloughs such as Salt Slough, Mud Slough and Kings Slough. Well-sorted, fine- and medium-grained, quartzose, cross-bedded sand, presumably derived from the Sierra Nevada, locally interfinger with or underlie fine-grained Coast Range alluvial-fan deposits. The sand probably originated by eolian reworking of Sierran alluvium from the floodbasin of the lower San Joaquin River or from fans of the northeastern San Joaquin Valley. These deposits are locally well exposed in Interstate-5 roadcuts, primarily between Orestimba and Garzas Creeks. The geomorphic character of the alluvium laid down by streams draining the Diablo Range reflects late Cenozoic uplift of the foothills and subsidence of the valley. Within the foothills and near the foothill-valley margin, the deposits form a sequence of inset stream terraces and nested alluvial fans. Valleyward, however, each deposit forms a veneer over older alluvial-fan deposits. Based primarily on geomorphic and pedologic indicators of relative age (see Figure 19 and Table 10), and to a lesser extent on lithologic and absolute age criteria, the late Cenozoic deposits are divided into five stratigraphic units. In order of decreasing age, these include the formally recognized Tulare Formation (Watts, 1894; Anderson, 1905) of late Pliocene and Pleistocene age, and the informally named Los Banos alluvium of middle and late Pleistocene age, San Luis Ranch alluvium of late Pleistocene and early Holocene age, and Patterson alluvium and Dos Palos alluvium of Holocene age. The Los Banos and San Luis Ranch alluvium are further divided into three and two members, respectively. Each of these members ranges in thickness from less than I m up to 15 m and thus represents, at least in part, a distinct period of aggradation. The lithology age and distribution of these units is described in the 'Stratigraphie Divisions' section of this report and is summarized in Figure 25 and Table 11. Plates 1 through 23 show the local distribution of these units on 7.5-minute Quadrangles. Mapping criteria are diagrammatically illustrated in Figure 19 and described in the 'Mapping Criteria' section of this report. Indirect evidence suggests that deposition of these units resulted primarily from climatic change rather than intermittent uplift of the Diablo Range. The units are recognized throughout 1500 Km

Open-File Report↗
USGS1994

Preliminary geomagnetic paleointensities from Long Valley Caldera, California

Paleointensities are being determined in order to characterize geomagnetic intensity variations during Quaternary time. Because the geomagnetic field acts as a shield against cosmic radiation, its intensity directly affects the production rate of radiocarbon (^C) in the upper atmosphere. Coe and others (1978) showed that the variation in dipole moment during Holocene time is nearly proportional to the difference between ^C and tree-ring age. The ^C timescale is currently well calibrated to about 9000 years B.P., and tentatively to about 13,000 years B.P., by comparison with tree-ring and glacial-varve chronologies (Stuiver and others, 1986). However, a comparison of ages determined by the l^C and 234u_230rh methods on coral samples off the island of Barbados (Bard and others, 1990) showed that U-Th ages were consistently older than ^4C ages in material older than about 9,000 years. The discrepancy is so large (3,500 years at 25,000 years B.P.) that Bard and others consider that it can only be due to a significant decrease in geomagnetic intensity during the last glacial period. Dipole field intensity has a similar modulating effect on the production of other cosmogenic nuclides that are used for geochronologic studies and will also affect their calibration curves. Mankinen and Champion (1993a,£) recently established broad trends in geomagnetic paleointensity for latest Pleistocene and Holocene time on Hawaii. The current study is the beginning of an effort to establish a similar record for western North America. Data from North America and Hawaii will eventually be averaged with other data from globally distributed locations to eliminate the effects on nondipole variations so that a true picture of the global (dipole) field can be obtained. The dipole variations can then be used to model accurately the production rate of cosmogenic nuclides as has been attempted by Mazaud and others (1991, 1994) using some relative paleointensity records from marine sediment cores.

California↗
USGS1995

Preliminary map of peak horizontal ground acceleration for the Hanshin-Awaji earthquake of January 17, 1995, Japan - Description of Mapped Data Sets

The Hanshin-Awaji earthquake (also known as the Hyogo-ken Nanbu and the Great Hanshin earthquake) provided an unprecedented set of measurements of strong ground shaking. The measurements constitute the most comprehensive set of strong- motion recordings yet obtained for sites underlain by soft soil deposits of Holocene age within a few kilometers of the crustal rupture zone. The recordings, obtained on or near many important structures, provide an important new empirical data set for evaluating input ground motion levels and site amplification factors for codes and site-specific design procedures world wide. This report describes the data used to prepare a preliminary map summarizing the strong motion data in relation to seismicity and underlying geology (Wentworth, Borcherdt, and Mark., 1995; Figure 1, hereafter referred to as Figure 1/I). The map shows station locations, peak acceleration values, and generalized acceleration contours superimposed on pertinent seismicity and the geologic map of Japan. The map (Figure 1/I) indicates a zone of high acceleration with ground motions throughout the zone greater than 400 gal and locally greater than 800 gal. This zone encompasses the area of most intense damage mapped as JMA intensity level 7, which extends through Kobe City. The zone of most intense damage is parallel, but displaced slightly from the surface projection of the crustal rupture zone implied by aftershock locations. The zone is underlain by soft-soil deposits of Holocene age.

Open-File Report↗
USGS1998

Quaternary geology and liquefaction susceptibility, Napa, California 1:100,000 quadrangle: A digital database

Earthquake-induced ground failures such as liquefaction have historically brought loss of life and damage to property and infrastructure. Observations of the effects of historical large-magnitude earthquakes show that the distribution of liquefaction phenomena is not random. Liquefaction is restricted to areas underlain by loose, cohesionless sands and silts that are saturated with water. These areas can be delineated on the basis of thorough geologic, geomorphic, and hydrologic mapping and map analysis (Tinsley and Holzer, 1990; Youd and Perkins, 1987). Once potential liquefaction zones are delineated, appropriate public and private agencies can prepare for and mitigate seismic hazard in these zones. In this study, we create a liquefaction susceptibility map of the Napa 1:100,000 quadrangle using Quaternary geologic mapping, analysis of historical liquefaction information, groundwater data, and data from other studies. The study is atterned after state-of-the-art studies by Youd (1973) Dupre and Tinsley (1980) and Dupre (1990) in the Monterey-Santa Cruz area, Tinsley and others (1985) in the Los Angeles area, and Youd and Perkins (1987) in San Mateo County, California. The study area comprises the northern San Francisco Metropolitan Area, including the cities of Santa Rosa, Vallejo, Napa, Novato, Martinez, and Fairfield (Figure 1). Holocene estuarine deposits, Holocene stream deposits, eolian sands, and artificial fill are widely present in the region (Helley and Lajoie, 1979) and are the geologic materials of greatest concern. Six major faults capable of producing large earthquakes cross the study area, including the San Andreas, Rodgers Creek, Hayward, West Napa, Concord, and Green Valley faults (Figure 1).

California↗
USGS1979

Upper Cenozoic deposits of the central Delmarva Peninsula, Maryland and Delaware

The surface and shallow subsurface sediments of the lower Delmarva Peninsula include beds ranging in age from Miocene to Holocene. The oldest beds appear to be typical shelf deposits of the Chesapeake Group (Calvert-Choptank age). These marine units are overlain by deltaic deposits, which range from fluviatile facies in the north (Pensauken Formation) to marginal marine and marine beds in the south ('Yorktown(?) and Cohansey(?)' Formations as used by Rasmussen and Slaughter in 1955). This large deltaic mass underlies most of the Delmarva Peninsula. Fossil age determinations supplemented by some radiometric dates indicate the delta to be largely late Miocene in age. The nonmarine facies of the delta, the Pensauken Formation, previously was considered to be Pleistocene in age. The late Miocene delta and possibly the Yorktown Formation (lower to middle Pliocene) are overlain by a feldspathic sand, the Beaverdam, which is at least in part marginal marine. Microflora recovered from this formation include species no longer indigenous to the Delmarva region ('exotics'). On the basis of existing information, microfloral assemblages containing 'exotics' are pre-Pleistocene in age. The Beaverdam therefore is pre-Pleistocene in age, probably late Pliocene. A highly dissected and weathered unit, the Walston Silt, caps the uplands of the central Delmarva Peninsula, where it overlies the Beaverdam. The Walston has a microflora containing 'exotics' and therefore is considered to be the youngest Tertiary unit (uppermost Pliocene) in this area. Sediments forming a barrier-back-barrier sequence fringe most of the southern Maryland-Delaware part of the Delmarva Peninsula and are found at altitudes of as much as 15 m (50 ft) above sea level. This sequence, the Omar Formation, is Sangamon in age and has been dated radiometrically as 60,000 to about 100,000 years old. The microflora in these beds contains no 'exotics,' and the assemblage suggests a warm-temperate environment. The Omar represents the highest stand of the Quaternary seas in the Delmarva region. The Ironshire and Kent Island Formations overlie or cut into the Omar Formation and are probably late Sangamon and middle Wisconsin, respectively, in age. Near Ocean City, the Ironshire forms a seaward-facing scarp with a toe nearly 4.5 m (15 ft) above sea level. A warm-temperate microfloral assemblage from the fluviatile-estuarine facies of the Ironshire Formation in the Delaware Bay region suggests that the formation is interglacial, probably late Sangamon in age. The Ironshire and Omar Formations are overlain unconformably by the Sinepuxent Formation. The top of this marine unit is slightly above present sea level and has been dated by radiocarbon as about 30,000 years old or middle Wisconsin. The microflora from this formation is a cold to cool-temperate assemblage (high proportion of spruce pollen). The outer fringes of the Delmarva Peninsula are being overlapped by deposits of a Holocene marine transgression.

Professional Paper↗
USGS1979

Sand dunes on the central Delmarva Peninsula, Maryland and Delaware

Inconspicuous ancient sand dunes are present in parts of the central Delmarva Peninsula, Maryland and Delaware. Many dunes are roughly V-shaped, built by northwest winds, especially on the east sides of some of the large rivers. On the uplands, the form and spacing of the dunes are variable. A surficial blanket composed mainly of medium and fine-grained sand-the Parsonsburg Sand-forms both the ancient dunes and the broad plains between the dunes. The sand that forms the dunes is massive and intensely burrowed in the upper part; traces of horizontal or slightly inclined bedding appear near the base. Quartz is the dominant mineral constituent of the sand. Microline is abundant in the very fine to fine sand fraction. The heavy-mineral assemblages (high zircon, tourmaline, rutile) are more mature than in most of the possible source rocks. The most abundant minerals in the clay-sized fraction are dioctahedral vermiculite, kaolinite, illite, montmorillonite, and gibbsite. The first four minerals are common in deposits of late Wisconsin and Holocene age. The gibbsite may be detrital, coming from weathered rocks of Tertiary age. The soil profile in the dune sand is weakly to moderately developed. At or near the base of the Parsonsburg Sand are peaty beds that range in age from about 30,000 to about 13,000 radiocarbon years B.P. Microfloral assemblages in the peaty beds suggest that the dunes on the uplands formed in a spruce parkland during the late Wisconsin glacial maximum. The river dunes may also be of late Wisconsin age, but could be Holocene.

Professional Paper↗
USGS2002

Geology and hydrogeology of the Caribbean Islands aquifer system of the Commonwealth of Puerto Rico and the U.S. Virgin Islands

Poorly lithified to unconsolidated carbonate and clastic sedimentary rocks of Tertiary (Oligocene to Pliocene) and Quaternary (Pleistocene to Holocene) age compose the South Coast aquifer and the North Coast limestone aquifer system of Puerto Rico; poorly lithified to unlithified carbonate rocks of late Tertiary (early Miocene to Pliocene) age make up the Kingshill aquifer of St. Croix, U.S. Virgin Islands. The South Coast aquifer, North Coast limestone aquifer system, and Kingshill aquifer are the most areally extensive and function as the major sources of ground water in the U.S. Caribbean Islands Regional Aquifer-System Analysis (CI-RASA) study area. In Puerto Rico's South Coast ground-water province, more than 1,000 meters of clastic and carbonate rocks of Oligocene to Pliocene age infill the South Coast Tertiary Basin. The pattern of lithofacies within this basin appears to have been controlled by changes in base level that were, at times, dominated by tectonic movement (uplift and subsidence), but were also influenced by eustasy. Deposition of the 70-kilometer long and 3- to 8-kilometer wide fan-delta plain that covers much of the South Coast ground-water province occurred largely in response to glacially-induced changes in sea level and climate during the Quaternary period. Tectonic movement played a much less important role during the Quaternary. The North Coast ground-water province of Puerto Rico is underlain by homoclinal coastal plain wedge of carbonate and siliciclastic rocks that infill the North Coast Tertiary Basin and thicken to more than 1,700 meters. A thin basal siliciclastic sequence of late Oligocene age is overlain by a thick section of mostly carbonate rocks of Oligocene to middle Miocene age. Globigerinid limestone of late Miocene to Pliocene age crops out and lies in the shallow subsurface areas of northwestern Puerto Rico. Oligocene to middle Miocene age rocks tentatively can be divided into five depositional sequences and associated systems tracts; these rocks record carbonate and minor siliciclastic deposition that occurred in response to changes in relative sea level. The Cibao Formation represents the most complex of these sequences and contains a varied facies of carbonate, mixed carbonate-siliciclastic, and siliciclastic rocks that reflect differential uplift, subsidence, and transgression of the sea. Uplift, graben formation, and gradual shallowing of the sea are reflected within the bathyal-dominated sedimentary facies of the Kingshill Limestone in St. Croix, U.S. Virgin Islands. Reef-tract limestone beds of Pliocene age were subject to exposure, resubmergence, and meteoric leaching of aragonitic skeletal debris; these beds contain patchy lenses of dolomite that are restricted to a small, structurally-controlled embayment. The South Coast aquifer, the principal water-bearing unit of Puerto Rico's South Coast ground-water province, consists of boulder- to silt-size detritus formed by large and small coalescing fan deltas of Pleistocene to Holocene age. Deep well data indicates that it is possible to vertically separate and group a highly complex and irregular-bedded detrital sequence that underlies distal parts of the fan-delta plain into discrete water-bearing units if correlated with 30- to 40-meter thick, eustatically-controlled depositional cycles. Lithofacies maps show that greatest hydraulic conductivity within the fan-delta plain is generally associated with proximal fan and midfan areas. Distal and interfan areas are least permeable. Alluvial valley aquifers located in the western part of the South Coast ground-water province are important local sources of water supply and appear to contain some of the same physical and hydraulic characteristics as the South Coast aquifer. Older sedimentary rocks within the basin are poor aquifers; conglomeratic beds are well-cemented, and carbonate beds do not contain well-developed solution features, except locally where the beds are overlain by alluvium. Ground-water occurs under unconfined conditions in proximal and midfan areas. Confined conditions within deeper parts of the system and in interfan and some midfan areas are created largely by the intercalated nature of discontinuous fine-grained beds that retard vertical ground-water movement. The development of water resources in southern Puerto Rico has modified the hydrologic system of the South Coast aquifer considerably. Under predevelopment conditions, the South Coast aquifer was recharged in the unconfined, proximal fan and some midfan areas by infrequent rainfall and seepage from streams near the fan apex. Discharge occurred as seabed seepage, baseflow discharge along the lower coastal reach of streams, seepage to coastal wetlands, or evapotranspiration in areas underlain by a shallow water table. Under development conditions, seepage from irrigation canals and areal recharge from furrow irrigation represented a principal mechanism for recharge to the aquifer. Increased ground-water withdrawals in the 1960's and 1970's resulted in declines in the water table to below sea level in some places and intrusion of salt water into the aquifer. By the middle 1980's, a reduction in ground-water withdrawals and a shift from furrow irrigation to drip-irrigation techniques resulted in the recovery of water levels. Under present-day (1986) conditions, regional ground-water flow is coastward but with local movement to some well fields. In addition to the discharge mechanisms described above, ground-water discharges also to coastal canals. The North Coast limestone aquifer system consists of limestone, lesser amounts of dolomite, and minor clastic detritus of Oligocene to Pliocene age that form an unconfined upper aquifer and a confined lower aquifer; these aquifers are separated by a clay, mudstone, and marl confining unit. Topographic relief and incision of carbonate coastal plain rocks by streams are the principal factors controlling the direction of ground-water flow. The North Coast limestone aquifer system is recharged principally by precipitation that enters the upper and lower aquifers where they crop out. Regional groundwater movement from the upper aquifer is to the major rivers, wells, coastal wetlands, coastal, nearshore, and offshore springs, or as seabed seepage. Regional discharge from the lower aquifer is to the major rivers along its unconfined parts or where the confining unit has been breached by streams. Discharge from the lower aquifer also occurs in the San Juan area where the Mucarabones Sand provides an avenue for diffuse upward ground-water flow. Transmissivity within the upper limestone aquifer appears to be largely regulated by the thickness of the freshwater lens. The lens is thickest and transmissivity is greatest in interstream areas that lie in a zone that closely corresponds to the landwardmost extent of the underlying saltwater wedge. Hydraulic conductivity of the upper aquifer generally increases in a coastward direction and reflects lithologic control, karstification in the upper 30 to 100 meters of the section, and enhanced permeability in a zone of freshwater and saltwater mixing. Transmissivity of the lower aquifer is an order of magnitude smaller than that of the upper aquifer; highest transmissivities in the lower aquifer largely correspond to a coarse grainstone-packstone and coral-patch-reef depositional facies contained within the outcropping parts of the Montebello Limestone Member and its subsurface equivalents. Porosity within the North Coast limestone aquifer system is high in grainstone-packstones and low in wackestone and marl. Dolomitized zones and moldic grainstone-packstone strata are the most porous carbonate rocks, but occur in thin beds that usually are only a few meters thick. Processes of karstification that include the development of caverous zones and large vugs, and dissolution along possible regional fracture sets has enhanced permeability within the upper part of the aquifer system. Stratigraphic and lithologic control play an important role controlling permeability within the lower part of the system. The Kingshill aquifer of St. Croix, in large part, is composed of deepwater limestone that contains only microscopic pores and is poorly permeable; however, the upper part of the aquifer, a shallow-water skeletal and reef limestone, is fairly permeable, but restricted in areal extent. Permeability within these uppermost beds of the aquifer has been enhanced by meteoric leaching, dissolution within a mixing zone of saltwater and fresh water, and dolomitization. However, most large-yield wells completed in the Kingshill aquifer are also screened in alluvium that overlies or infills incised channels. The alluvial deposits serve as a temporary storage zone for rainfall, runoff, and ground water slowly entering the Kingshill aquifer.

Puerto Rico↗
USGS2004

Eruptive history and chemical evolution of the precaldera and postcaldera basalt-dacite sequences, Long Valley, California: Implications for magma sources, current seismic unrest, and future volcanism

The Long Valley Volcanic Field in east-central California straddles the East Sierran frontal fault zone, overlapping the Sierra Nevada and western Basin and Range Provinces. The volcanic field overlies a mature mid-Tertiary erosional surface that truncates a basement composed mainly of Mesozoic plutons and associated roof pendants of Mesozoic metavolcanic and Paleozoic metasedimentary rocks. Long Valley volcanism began about 4 Ma during Pliocene time and has continued intermittently through the Holocene. The volcanism is separable into two basalt-rhyolite episodes: (1) an earlier, precaldera episode related to Long Valley Caldera that climaxed with eruption of the Bishop Tuff and collapse of the caldera; and (2) a later, postcaldera episode structurally related to the north-south-trending Mono-Inyo Craters fissure system, which extends from the vicinity of Mammoth Mountain northward through the west moat of the caldera to Mono Lake. Eruption of the basalt-dacite sequence of the precaldera basalt-rhyolite episode peaked volumetrically between 3.8 and 2.5 Ma; few basalts were erupted during the following 1.8 m.y. (2.5–0.7 Ma). Volcanism during this interval was dominated by eruption of the voluminous rhyolites of Glass Mountain (2.2–0.8 Ma) and formation of the Bishop Tuff magma chamber. Catastrophic rupture of the roof of this magma chamber caused eruption of the Bishop Tuff and collapse of Long Valley Caldera (760 ka), after which rhyolite eruptions resumed on the subsided caldera floor. The earliest postcaldera rhyolite flows (700–500 ka) contain quenched globular basalt enclaves (mafic magmatic inclusions), indicating that basaltic magma had reentered shallow parts of the magmatic system after a 1.8-m.y. hiatus. Later, at about 400 ka, copious basalts, as well as dacites, began erupting from vents mainly in the west moat of the caldera. These later eruptions initiated the postcaldera basalt-rhyolite episode related to the Mono-Inyo Craters fissure system, which has been active through late Pleistocene and Holocene time.

California↗