USGS Science⌕ Search

SEARCH · USGS Science

Results for “Scanning”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 883 records · Page 49Linked to original sources
USGS2007

Bathymetry of Walker Lake, West-Central Nevada

Walker Lake lies within a topographically closed basin in west-central Nevada and is the terminus of the Walker River. Much of the streamflow in the Walker River is diverted for irrigation, which has contributed to a decline in lake-surface altitude of about 150 feet and an increase in dissolved solids from 2,500 to 16,000 milligrams per liter in Walker Lake since 1882. The increase in salinity threatens the fresh-water ecosystem and survival of the Lahontan cutthroat trout, a species listed as threatened under the Endangered Species Act. Accurately determining the bathymetry and relations between lake-surface altitude, surface area, and storage volume are part of a study to improve the water budget for Walker Lake. This report describes the updated bathymetry of Walker Lake, a comparison of results from this study and a study by Rush in 1970, and an estimate of the 1882 lake-surface altitude. Bathymetry was measured using a single-beam echosounder coupled to a differentially-corrected global positioning system. Lake depth was subtracted from the lake-surface altitude to calculate the altitude of the lake bottom. A Lidar (light detection and ranging) survey and high resolution aerial imagery were used to create digital elevation models around Walker Lake. The altitude of the lake bottom and digital elevation models were merged together to create a single map showing land-surface altitude contours delineating areas that are currently or that were submerged by Walker Lake. Surface area and storage volume for lake-surface altitudes of 3,851.5-4,120 feet were calculated with 3-D surface-analysis software. Walker Lake is oval shaped with a north-south trending long axis. On June 28, 2005, the lake-surface altitude was 3,935.6 feet, maximum depth was 86.3 feet, and the surface area was 32,190 acres. The minimum altitude of the lake bottom from discrete point depths is 3,849.3 feet near the center of Walker Lake. The lake bottom is remarkably smooth except for mounds near the shore and river mouth that could be boulders, tree stumps, logs, or other submerged objects. The echosounder detected what appeared to be mounds in the deepest parts of Walker Lake, miles from the shore and river mouth. However, side-scan sonar and divers did not confirm the presence of mounds. Anomalies occur in two northwest trending groups in northern and southern Walker Lake. It is hypothesized that some anomalies indicate spring discharge along faults based on tufa-like rocks that were observed and the northwest trend parallel to and in proximity of mapped faults. Also, evaporation measured from Walker Lake is about 50 percent more than the previous estimate, indicating more water is flowing into the lake from sources other than the Walker River. Additional studies need to be done to determine what the anomalies are and whether they are related to the hydrology of Walker Lake. Most differences in surface area and storage volume between this study and a study by Rush in 1970 were less than 1 percent. The largest differences occur at lake-surface altitudes less than 3,916 feet. In general, relations between lake-surface altitude, surface area, and storage volume from Rush's study and this study are nearly identical throughout most of the range in lake-surface altitude. The lake-surface altitude in 1882 was estimated to be between 4,080 feet and 4,086 feet with a probable altitude of 4,082 feet. This estimate compares well with two previous estimates of 4,083 feet and 4,086 feet. Researchers believe the historic highstand of Walker Lake occurred in 1868 and estimated the highstand was between 4,089 feet and 4,108 feet. By 1882, Mason Valley was predominantly agricultural. The 7-26 feet decline in lake-surface altitude between 1868 and 1882 could partially be due to irrigation diversions during this time.

Scientific Investigations Report↗
USGS2010

Bathymetric surveys at highway bridges crossing the Missouri River in Kansas City, Missouri, using a multibeam echo sounder, 2010

Bathymetric surveys were conducted by the U.S. Geological Survey, in cooperation with the Missouri Department of Transportation, on the Missouri River in the vicinity of nine bridges at seven highway crossings in Kansas City, Missouri, in March 2010. A multibeam echo sounder mapping system was used to obtain channel-bed elevations for river reaches that ranged from 1,640 to 1,800 feet long and extending from bank to bank in the main channel of the Missouri River. These bathymetric scans will be used by the Missouri Department of Transportation to assess the condition of the bridges for stability and integrity with respect to bridge scour. Bathymetric data were collected around every pier that was in water, except those at the edge of the water or in extremely shallow water, and one pier that was surrounded by a large debris raft. A scour hole was present at every pier for which bathymetric data could be obtained. The scour hole at a given pier varied in depth relative to the upstream channel bed, depending on the presence and proximity of other piers or structures upstream from the pier in question. The surveyed channel bed at the bottom of the scour hole was between 5 and 50 feet above bedrock. At bridges with drilled shaft foundations, generally there was exposure of the upstream end of the seal course and the seal course often was undermined to some extent. At one site, the minimum elevation of the scour hole at the main channel pier was about 10 feet below the bottom of the seal course, and the sides of the drilled shafts were evident in a point cloud visualization of the data at that pier. However, drilled shafts generally penetrated 20 feet into bedrock. Undermining of the seal course was evident as a sonic 'shadow' in the point cloud visualization of several of the piers. Large dune features were present in the channel at nearly all of the surveyed sites, as were numerous smaller dunes and many ripples. Several of the sites are on or near bends in the river, resulting in a deep channel thalweg on the outside of the bend at these sites. At structure A5817 on State Highway 269, bedrock exposure was evident in the channel thalweg. The surveyed channel bed at a given site from this study generally was lower than the channel bed obtained during Level II scour assessments in 2002. At piers with well-defined scour holes, the frontal slopes of the holes were somewhat less than recommended values in the literature, and the shape of the holes appeared to be affected by the movement of dune features into and around the holes. The channel bed at all of the surveyed sites was lower than the channel bed at the time of construction, and an analysis of measurement data from the U.S. Geological Survey continuous streamflow-gaging station on the Missouri River at Kansas City, Missouri (station number 06893000), confirmed a lowering trend of the channel-bed elevations with time at the gaging station. The size of the scour holes observed at the surveyed sites likely was affected by the moderate flood conditions on the Missouri River at the time of the surveys. The scour holes likely would be substantially smaller during conditions of low flow.

Scientific Investigations Report↗
USGS2011

Bathymetric surveys at highway bridges crossing the Missouri and Mississippi Rivers near St. Louis, Missouri, 2010

Bathymetric surveys were conducted by the U.S. Geological Survey, in cooperation with the Missouri Department of Transportation, on the Missouri and Mississippi Rivers in the vicinity of 12 bridges at 7 highway crossings near St. Louis, Missouri, in October 2010. A multibeam echo sounder mapping system was used to obtain channel-bed elevations for river reaches ranging from 3,280 to 4,590 feet long and extending across the active channel of the Missouri and Mississippi Rivers. These bathymetric scans provide a snapshot of the channel conditions at the time of the surveys and provide characteristics of scour holes that may be useful in the development of predictive guidelines or equations for scour holes. These data also may be used by the Missouri Department of Transportation to assess the bridges for stability and integrity issues with respect to bridge scour. Bathymetric data were collected around every pier that was in water, except those at the edge of water or in extremely shallow water, and one pier that was surrounded by a large debris raft. Scour holes were present at most piers for which bathymetry could be obtained, and ranged from 0 to 16 feet deep except at piers on channel banks or those near or embedded in rock dikes. Scour holes observed at the surveyed bridges were examined with respect to frontal slope and shape, and scour holes near railroad bridges in the vicinity of the highway bridges also were examined. Although exposure of parts of foundational support elements was observed at several piers, the exposure likely can be considered minimal compared to the overall substructure that remains buried at these piers. At piers with well-defined scour holes, the frontal slopes of the holes ranged from 1.70 to 2.94 feet per foot (computed as run over rise), which were similar to recommended values in the literature (generally ranging from 1.0 to 2.0), and the shapes of the scour holes were not substantially affected by the movement of sand waves into the holes. Spur dikes near several of the piers caused localized flow disturbances that caused the resultant scour holes to display characteristics of skewed approach flow. The channel bed in the 2010 surveys was as much as 16 feet lower than the channel bed at the time of construction at the two oldest surveyed bridges, and the range varied with age of the structure, indicating the channel-bed elevations have lowered with time. However, other research has indicated the extremely dynamic nature of the channel bed on the Mississippi River. The size of the scour holes observed at the surveyed sites likely was affected by the low to moderate flow conditions on the Missouri and Mississippi Rivers at the time of the surveys. The scour holes likely would be larger during conditions of increased flow. Artifacts of horizontal positioning errors were present in the data, but an analysis of the surveys indicated that most of the bathymetric data have a total propagated error of less than 0.33 foot.

Scientific Investigations Report↗
USGS2012

Bathymetric and velocimetric surveys at highway bridges crossing the Missouri River in and into Missouri during summer flooding, July-August 2011

Bathymetric and velocimetric surveys were conducted by the U.S. Geological Survey, in cooperation with the Kansas and Missouri Departments of Transportation, in the vicinity of 36 bridges at 27 highway crossings of the Missouri River between Brownville, Nebraska and St. Louis, Missouri, from July 13 through August 3, 2011, during a summer flood. A multibeam echo sounder mapping system was used to obtain channel-bed elevations for river reaches ranging from 1,350 to 1,860 feet and extending across the active channel of the Missouri River. These bathymetric scans provide a "snapshot" of the channel conditions at the time of the surveys and provide characteristics of scour holes that may be useful in the development of predictive guidelines or equations for scour holes. These data also may be used by the Kansas and Missouri Departments of Transportation to assess the bridges for stability and integrity issues with respect to bridge scour during floods. Bathymetric data were collected around every pier that was in water, except those at the edge of water, in extremely shallow water, or surrounded by debris rafts. Scour holes were present at most piers for which bathymetry could be obtained, except at piers on channel banks, those near or embedded in lateral or longitudinal spur dikes, and those on exposed bedrock outcrops. Scour holes observed at the surveyed bridges were examined with respect to depth and shape. Although exposure of parts of foundational support elements was observed at several piers, at most sites the exposure likely can be considered minimal compared to the overall substructure that remains buried in bed material; however, there were several notable exceptions where the bed material thickness between the bottom of the scour hole and bedrock was less than 6 feet. Such substantial exposure of usually buried substructural elements may warrant special observation in future flood events. Previous bathymetric surveys had been done at several of the sites, and comparisons between bathymetric surfaces from the previous surveys and those of this study indicate substantial variability in the response of the channel bed to the 2011 summer flood conditions. At sites in Kansas City, there was no consistent deepening of the channel or increase in the size of scour holes, despite substantially more discharge and a higher water-surface elevation in the 2011 surveys, which implies the high-flow conditions during the 2011 surveys created a similar scour scenario to the previous surveys. At Jefferson City and the St. Louis sites, there was a consistent deepening of the channel, and a slight to substantial increase in the depth of scour holes in the 2011 surveys compared to previous surveys, although the effects of the higher flow appeared to be mitigated by the shape and alignment of the piers at most sites in St. Louis. Construction activities related to a new bridge at the Atchison, Kansas, site likely have contributed to the substantial additional scour observed there in a previous survey during the 2010 flooding, and the subsequent aggradation of the channel bed observed in the 2011 survey. Pier size, nose shape, and alignment to flow also had a profound effect on the size of the scour hole observed for a given pier.

Missouri;Nebraska↗
USGS2013

Settlement of the USS Arizona, Pearl Harbor, Hawaii

The U.S. Geological Survey, in collaboration with the National Park Service Submerged Resources Center, undertook investigations at the USS Arizona Memorial at Pearl Harbor, Hawaii, in 2002, 2003, and 2005 to characterize geological factors affecting the deterioration and movement of the hull of the USS Arizona. Since sinking on the morning of December 7, 1941, the hull of the USS Arizona has been slowly but steadily disappearing below the surface of Pearl Harbor. Continuous sediment coring at three of four locations around the hull of the Arizona was only partially successful, but it was sufficient to identify a varied sedimentary substrate beneath the hull. A boring near the stern reveals a thick, continuous sequence of soft, gray clay to the bottom of the boring. In contrast, borings near the bow and starboard side, below about 5 meters subbottom depth, indicate the presence of very stiff, brown clay and coral debris and an absence of soft clay. Multisensor core logger scanning of the recovered cores distinguishes the lower density of the soft, gray clay at the stern from the higher density of the stiff, brown clays and coral debris at the bow and starboard side. Uniaxial consolidation testing of the soft gray clay indicates a normally consolidated sequence, whereas the stiff, brown clay and coral debris are overconsolidated. Profiles of shear wave velocity vs. depth obtained through spectral analysis of interface wave testing around the perimeter of the hull in 2005 identified areas of higher velocity, stiffer sediment at the bow and starboard side, which correspond to the dense, stiff clay recovered near the bow and starboard borings. Low shear-wave velocities at the port midship and quarter of the hull correlate with the lower density, softer sediment recovered from the boring at the stern. Cross sections of the subbottom of the Memorial combine results from the sediment borings and geophysical surveys and depict a wedge of soft clay unconformably overlying the stiff clays and coral debris beneath the aft half of the USS Arizona and thickening toward the stern. The 2008 position of the hull has been documented using both tide-based and differential Global Positioning System (GPS) measuring systems. Analysis of historical and recent photographs was done to create a record of settlement from the time of sinking in 1941 to the present. By examining shadows in suitable photos, the sun azimuth, local time of day, and tide levels were determined to derive tide-adjusted and sea-level-rise-corrected elevations for structures on the hull and from these elevations to obtain settlement and tilt trends. The settlement trends, most complete for barbette 3, have two components. An early, nonlinear component ends on December 9, 1941, and represents the initial penetration and displacement of the bottom sediment by the hull. A linear, long-term trend of normal consolidation continues to the present day. Long-term settlement rates are greatest at the stern and decrease linearly to the midship, showing that the aft half of the hull is moving as an intact, rigid body. The recent rate of settlement at the stern is about 3.5 mm/year; rates at the starboard midship and forward part of the hull are less than one-third of the stern rate. The aft half of the USS Arizona hull presently tilts about 2 degrees to port, an increase of at least 1.5 degrees since the initial sinking of the ship. The results of this study identify differential settlement of the Arizona hull, due to the wedge of soft clay underlying the aft half of the hull, as the cause of the movement of the hull beneath the surface of Pearl Harbor. Calculation of sediment consolidation using lab-determined properties of the soft clay demonstrates that the observed settlements can be reproduced by projecting appropriate clay thicknesses beneath the hull. Several of the high-quality photographs analyzed for the historical settlement analysis highlight some of the limitations of this retrospective technique for determining tide-based elevations. In these cases, calculated structure elevations do not conform to the settlement trend, indicating that there can be complicating factors affecting the interpretation of the photos. Conflicting dates for events during the salvage operations were also encountered.

Hawai'i↗
USGS2013

Erosion monitoring along the Coosa River below Logan Martin Dam near Vincent, Alabama, using terrestrial light detection and ranging (T-LiDAR) technology

Alabama Power operates a series of dams on the Coosa River in east central Alabama. These dams form six reservoirs that provide power generation, flood control, recreation, economic opportunity, and fish and wildlife habitats to the region. The Logan Martin Reservoir is located approximately 45 kilometers east of Birmingham and borders Saint Clair and Talladega Counties. Discharges below the reservoir are controlled by power generation at Logan Martin Dam, and there has been an ongoing concern about the stability of the streambanks downstream of the dam. The U.S. Geological Survey, in cooperation with Alabama Power conducted a scientific investigation of the geomorphic conditions of a 115-meter length of streambank along the Coosa River by using tripod-mounted terrestrial light detection and ranging technology. Two surveys were conducted before and after the winter flood season of 2010 to determine the extent and magnitude of geomorphic change. A comparison of the terrestrial light detection and ranging datasets indicated that approximately 40 cubic meters of material had been eroded from the upstream section of the study area. The terrestrial light detection and ranging data included in this report consist of electronic point cloud files containing several million georeferenced data points, as well as a surface model measuring changes between scans.

Alabama↗
USGS2016

Hydrogeologic investigations of the Miocene Nogales Formation in the Nogales Area, Upper Santa Cruz Basin, Arizona

Hydrogeologic investigations were conducted to evaluate the groundwater resource potential for the Miocene Nogales Formation in the Nogales area, southern Arizona. Results indicate that parts of the formation may provide new, deeper sources of groundwater for the area. Geologic mapping determined the hydrogeologic framework of the formation by defining lithologic, mineralogic, and stratigraphic characteristics; identifying potential aquifers and confining units; and mapping faults and fractures which likely influence groundwater flow. Geophysical modeling was used to determine the basin geometry and thickness of the Nogales Formation and younger alluvial aquifers and to identify target areas (deep subbasins) which may prove to be productive aquifers. Volcaniclastic sandstone samples from the formation were analyzed for porosity, bulk density, saturated hydraulic conductivity, and fabric. Effective porosity ranges from 16 to 42 percent, bulk density from 1.6 to 2.47 grams per cubic centimeter, and saturated hydraulic conductivity (SHC) from 4 to 57 centimeters per day (4.9×10 -5 to 6.7×10 -4 centimeters per second). Thin sections show that sandstone framework grains consist of quartz, feldspar, biotite, hornblende, pumice, volcanic glass, and opaque minerals. The matrix in most samples consists of pumice fragments, and some contain predominantly silt and clay. Samples with a mostly silt and clay matrix have lower porosity and SHC compared to samples with mostly pumice, which have higher and wider ranges of porosity and SHC. Pore space in the Nogales Formation sediments includes moldic, intercrystalline, and fracture porosity. Some intercrystalline pore space is partially filled with calcite cement. About one third of the samples contain fractures, which correspond to fractures noted in outcrops in all members of the formation. Scanning electron microscope (SEM) and x-ray diffraction (XRD) analyses indicate that most of the samples contained the zeolite clinoptilolite and mixed-layer clay. X-ray diffraction analyses verified clinoptilolite as the only zeolite in Nogales Formation samples; they also verified the presence of smectite and illite clay and some kaolinite. Samples which contain greater amounts of clinoptilolite and lesser amounts of smectite have high porosity and SHC in narrow ranges. However, samples with abundant smectite and lesser amounts of clinoptilolite span the entire ranges of porosity and SHC for the formation. All members of the Nogales Formation are fractured and faulted as a result of Tertiary Basin and Range extensional deformation, which was broadly contemporaneous with deposition of the formation. These structures may have significant influence on groundwater flow in the upper Santa Cruz basin because, although many of the sediments in the formation have characteristics indicating they may be productive aquifers based only on porous-media flow, fracturing in these sediments may further enhance permeability and groundwater flow in these basin-fill aquifers by orders of magnitude.

Arizona↗
USGS2017

The discovery and character of Pleistocene calcrete uranium deposits in the Southern High Plains of west Texas, United States

This report describes the discovery and geology of two near-surface uranium deposits within calcareous lacustrine strata of Pleistocene age in west Texas, United States. Calcrete uranium deposits have not been previously reported in the United States. The west Texas uranium deposits share characteristics with some calcrete uranium deposits in Western Australia—uranium-vanadium minerals hosted by nonpedogenic calcretes deposited in saline lacustrine environments. In the mid-1970s, Kerr-McGee Corporation conducted a regional uranium exploration program in the Southern High Plains province of the United States, which led to the discovery of two shallow uranium deposits (that were not publicly reported). With extensive drilling, Kerr-McGee delineated one deposit of about 2.1 million metric tons of ore with an average grade of 0.037 percent U 3 O 8 and another deposit of about 0.93 million metric tons of ore averaging 0.047 percent U 3 O 8 . The west-Texas calcrete uranium-vanadium deposits occur in calcareous, fine-grained sediments interpreted to be deposited in saline lakes formed during dry interglacial periods of the Pleistocene. The lakes were associated with drainages upstream of a large Pleistocene lake. Age determinations of tephra in strata adjacent to one deposit indicate the host strata is middle Pleistocene in age. Examination of the uranium-vanadium mineralization by scanning-electron microscopy indicated at least two generations of uranium-vanadium deposition in the lacustrine strata identified as carnotite and a strontium-uranium-vanadium mineral. Preliminary uranium-series results indicate a two-component system in the host calcrete, with early lacustrine carbonate that was deposited (or recrystallized) about 190 kilo-annum, followed much later by carnotite-rich crusts and strontium-uranium-vanadium mineralization in the Holocene (about 5 kilo-annum). Differences in initial 234 U/ 238 U activity ratios indicate two separate, distinct fluid sources.

Texas↗
USGS2020

Assessment of bridge scour countermeasures at selected bridges in the United States, 2014–18

Erosion of the streambed, known also as scour, around pier 3 of the New York State Thruway bridge over Schoharie Creek caused the pier to fail, which ultimately resulted in bridge failure during the flooding event of April 5, 1987. The Federal Highway Administration (FHWA) responded to the need for better guidance on the evaluation of bridge scour and the selection and installation of scour countermeasures with the release of several Hydraulic Engineering Circulars. Although this information has been available, used, and updated over the years, an evaluation of the current conditions of scour countermeasures has not been performed. Therefore, the U.S. Geological Survey, in cooperation with the FHWA, began a study in 2013 to assess the current conditions of bridge scour countermeasures at selected sites around the country. The bridge scour countermeasure site assessments included reviewing countermeasure design plans, field inspections, traditional surveys, motion-compensated terrestrial light detection and ranging technology (lidar), high-resolution multi-beam bathymetry scanning, underwater video imaging, and a review of the peak and daily streamflow history for the associated river or stream. A total of 34 bridge scour countermeasure sites were selected in 11 states for this study. The types of countermeasures installed at the bridge scour study sites ranged from riprap, the most common countermeasure in the study, to A-Jacks and cabled-concrete mattresses. The installed countermeasures were generally exposed to hydraulic forces from floods that equaled or exceeded the 1-percent, and even the 0.2-percent, annual exceedance probability at some of the study sites, but not all. The field inspections and countermeasure evaluations identified areas of shifting, slumping, and some scour holes and damage or washouts to the countermeasures, but generally most remained in place. The high-resolution laser scanner data, photo imaging and traditional survey data, and field notes were provided to the FHWA for expert evaluation of the bridge scour countermeasure performance.

Alabama, Florida, Idaho, Illinois, Indiana, Iowa, ↗
USGS2020

Statewide assessment of karst aquifers in New York with an inventory of closed-depression and focused-recharge features

Karst is a landscape formed from the dissolution of soluble rock or rock containing minerals that are easily dissolved from within the rock. The landscape is characterized by sinkholes, caves, losing streams, springs, and underground drainage systems, which rapidly move water through the karst. The two forms of karst in New York State include carbonate karst, which forms in carbonate rock (limestone, marble, and dolostone), and evaporite karst, which forms in rock that contains the evaporite minerals gypsum and halite. Past and recent studies of karst across the State have shown that areas of focused recharge in karstic carbonate rock allow contaminants to enter aquifer systems with little attenuation. Focused areas of recharge need to be identified to help prevent such contamination from sources on or adjacent to the karst. The New York State Departments of Environmental Conservation and Health are collaborating with the agricultural community to make farmers and farm-planning advisors more aware of karst and how to manage daily farming activities to reduce their impact on surface water and groundwater resources, especially in karst areas. There is also a need to make regulators, planners, and the general public aware of New York’s karst resources and to properly protect and manage these resources to protect the quality of groundwater and surface water that can flow into, through, and from karst bedrock. Using publicly available geospatial data, karst bedrock and closed depressions over or near karst rock were identified across New York. Carbonate, evaporite, and marble geologic units were selected from a statewide 1:250,000-scale bedrock geology dataset. The selected geologic units were intersected with 7.5-minute quadrangle maps to define the study area. The U.S. Geological Survey has compiled an inventory of closed depressions from statewide digital contour data, scanned 7.5-minute topographic maps known as a digital raster graphics, and light detection and ranging (lidar) digital elevation models. Analysis of the data resulted in the identification of 5,023 closed depressions statewide. The inventory was conducted to eliminate duplication of results from analysis of the three data sources. A series of overlay analyses was conducted using the closed depressions and thematic data known to be key factors in determining the probability of a closed depression contributing to focused groundwater recharge; the thematic data include bedrock geology, soil type, soil infiltration rate, and land cover. Though the extent of karst development is important in understanding the interaction between surface water and groundwater in karst terrains, some of the worst cases of groundwater contamination in karst can occur where only minor karst features might be present. The presence of karst—be it a short section of a solutioned fracture or an extensive cave system—requires careful consideration, forward-looking environmental planning, and consistent water-quality protection to preserve New York State’s water resources.

New York↗
USGS2021

Storage capacity and sedimentation characteristics of Loch Lomond Reservoir, California, 2019

In May of 2019, Loch Lomond Reservoir was surveyed by the U.S. Geological Survey (USGS) in cooperation with the city of Santa Cruz to assess the current storage capacity and sedimentation rates in the reservoir. Survey methods combined sonar soundings to measure bathymetry and lidar scans with GPS data to measure near-shore topography and sediment bed samples to understand reservoir bed-material size. The survey data produced a bare-earth digital elevation model (DEM) of the reservoir at a resolution of 1 square meter or better to elevations at or above the reservoir spillway elevation, providing the coverage needed to estimate storage capacity. Additionally, the USGS compared the current survey to storage estimates from historical surveys—particularly the most recent survey in 2009—to evaluate storage capacity trends. Lastly, a hindcast estimate of scaled sediment yield using sediment yields from the San Lorenzo River (USGS station 11160500)—where the San Lorenzo River watershed encompasses the Loch Lomond Reservoir watershed—were used to compare indirect estimates of storage loss to direct storage loss. The 2019 survey resulted in a measured storage capacity of 8,770±50 acre-feet. The differences in storage between 2009 and 2019 varied substantially by depth. In shallow areas with depths less than 30 ft (at full reservoir), such as the very upstream end of the reservoir, storage loss (sediment deposition) dominated with a loss of about 68 acre-feet from 2009 to 2019. In areas deeper than 30 ft, persistent small storage gains over a wide range of depths totaled 82 acre-feet from 2009 to 2019. Storage loss estimates derived from estimated watershed sediment yields and reservoir characteristics were similar to storage losses computed from past surveys. This hindcasting produced an estimate of about 500 acre-feet of total storage loss for the history of the reservoir, or an average of about 8–9 acre-feet/year during the 60-year period. For the period 2009–2019, the hindcast produced an estimated total storage loss of 42 acre-feet, which is broadly consistent with the 68 acre-feet of storage loss computed for shallow areas based on the repeat surveys.

California↗
USGS2023

Analysis of high-resolution single channel seismic data for use in sediment resource evaluation, eastern Texas and western Louisiana Continental Shelf, Gulf of Mexico

Shallow subsurface geologic data recorded as high-resolution seismic profiles are used to interpret the geology of coastal and marine systems. These data were originally recorded on paper rolls that are stored in geophysical archives. Data collection has since converted to entirely digital formats, yet the analog data are still useful for geologic interpretation. This report describes the process of recovering analog copies of seismic profiles from physical archives, electronically scanning, and converting them to industry-standard digital format. The recovered data are also reviewed and assessed for potential sediment resources. The data recovered in this study were collected from the Gulf of Mexico continental shelf offshore of East Texas and West Louisiana. The project is a collaborative study between the U.S. Geological Survey and the Bureau of Ocean Energy Management.

Louisiana, Texas↗
USGS2026

Streamflow characterization and effects of Interstate 26 highway construction on water-quality and channel morphology conditions of the French Broad River in Buncombe and Henderson Counties, North Carolina, 2019–22

The North Carolina Department of Transportation began a series of highway construction projects to upgrade Interstate 26 (I–26) in Buncombe and Henderson Counties, North Carolina, starting in early 2020. The North Carolina Department of Transportation and the U.S. Geological Survey partnered in 2019 to monitor and assess water-quality and geomorphic conditions throughout the French Broad River corridor in areas near Interstate 26 highway construction activities. This report summarizes findings from multi-year water-quality and channel morphology monitoring from 2019 through 2022 in the French Broad River corridor near ongoing highway construction activities. Dissolved oxygen, pH, specific conductance, turbidity, and water temperature were monitored at six gaging locations, three of which were near highway sections undergoing construction during the study period from June 1, 2019, through December 31, 2022. Water quality was compared across three monitoring locations before and during construction using Brunner-Dette-Munk statistical tests, a nonparametric form of analysis of variance used for unbalanced datasets. Most Brunner-Dette-Munk test results detected insignificant effects of highway construction on water-quality conditions when controlling for monitoring location, except for the test of daily maximum specific conductance values. However, the effects of highway construction could not be isolated from other external factors that may have affected specific conductance, including an extended period of low streamflow and possible road salt application after winter storms. Additional Brunner-Dette-Munk tests, controlling for flow magnitude (streamflow quantiles) or hydrograph position (“rising limb,” “falling limb,” or “base flow”), did not suggest that highway construction affected water-quality conditions in the study area. Geomorphic surveys of the streambed and streambanks were performed in a 1-kilometer reach from 2019 through 2022 to assess geomorphic changes during the reconstruction of a bridge spanning the French Broad River. Bathymetric surveys of the streambed and light detection and ranging (lidar) scans of the streambanks were collected from a canoe using motion-compensated, real-time positioning solutions. Initial geomorphic surveys were used as a baseline to which subsequent repeat surveys were compared using geomorphic change detection analysis. Detectable elevation changes were determined using statistically robust thresholds, ensuring only changes exceeding measurement uncertainty were considered for interpretive analyses. Change detection results identified that 16.4 percent of the reach experienced detectable geomorphic change during the study period, with inter-survey changes ranging from 3.5 to 12.4 percent of the total reach. Most detectable change is attributed to the installation and reconfiguration of temporary construction pads; other changes are attributed to enlargement of a scour hole and upstream deposition near the bridge. Although anthropogenic activities and changes in streamflow regime contributed to these observations, the approach used in this study provides confidence that reported values reflect real geomorphic changes and not noise.

North Carolina↗
USGS1953

Radioactive source materials in Los Estados Unidos de Venezuela

This report summarizes the data available on radioactive source materials in Los Estados Unidos de Venezuela accumulated by geologists of the Direccions Tecnica de Geolgia and antecedent agencies prior to June 1951, and the writers from June to November 1951. The investigation comprised preliminary study, field examination, office studies, and the preparation of this report, in which the areas and localities examined are described in detail, the uranium potentialities of Venezuela are summarized, and recommendations are made. Preliminary study was made to select areas and rock types that were known or reported to be radioactive or that geologic experience suggests would be favorable host for uranium deposits, In the office, a study of gamma-ray well logs was started as one means of amassing general radiometric data and of rapidly scanning many of ye rocks in northern Venezuela; gamma-ray logs from about 140 representative wells were examined and their peaks of gamma intensity evaluated; in addition samples were analyzed radiometrically, and petrographically. Radiometic reconnaissance was made in the field during about 3 months of 1951, or about 12 areas, including over 100 localities in the State of Miranda, Carabobo, Yaracuy, Falcon, Lara, Trujillo, Zulia, Merida, Tachira, Bolivar, and Territory Delta Amacuro. During the course of the investigation, both in the filed and office, information was given about geology of uranium deposits, and in techniques used in prospecting and analysis. All studies and this report are designed to supplement and to strengthen the Direccion Tecnica de Geologias's program of investigation of radioactive source in Venezuela now in progress. The uranium potentialities of Los Estados de Venezuela are excellent for large, low-grade deposits of uraniferous phospahtic shales containing from 0.002 to 0.027 percent uranium; fair, for small or moderate-sized, low-grade placer deposits of thorium, rare-earth, and uranium minerals; poor, for high-grade hydrothermal pitchblende deposits; and highly possible for small, medium- to high-grade despots of carnotite-or copper-uranium bearing sandstone. Recommendations for the Venezuelan uranium program include 1) the systematic collection of a mass general radiometric data by examining sample collections, expanding the gamma-ray program, encouraging the use of Geiger counter by field geologists, and by enlisting the aid of the general public; 2) , the examination of specific areas or localities, chosen on the basis of geologic favorability from the results of the amassing of data, or obtained by hints and rumors; 3), the organization of a unit within the Direccion Tecnica de Geologica to direct, collection, and collate metric data. It is emphasized that to be most fruitful the program requires the application of sounds and imaginative geologic theory.

Trace Elements Investigations↗
USGS1952

Compilation of data on the uranium and equivalent uranium content of samples analyzed by U.S. Geological Survey during a program of sampling mine, mill, and smelter products

In 1942 the Geological Survey began to collect, in response to a request made by the War Production Board, samples of mine, mill, and smelter products. About 1,400 such samples were collected and analyzed spectrographically for about 20 elements that were of strategic importance, in order to determine whether any of the products analyzed might be possible sources of some of the needed elements. When attention was directed to radioactive elements in 1943, most of the samples were scanned for radioactivity. Part of the work was done on behalf of the Division of Raw Materials of the Atomic Energy Commission. The sources, mine mill, smelter, or prospect, from which these samples were collected, the kind of material sampled, i.e. ores, concentrates, middlings, tailings, flue dusts, and so forth, and the radioactivity of the samples are listed in this report. Samples of the materials collected in the course of the Geological Survey’s investigations for uranium are excluded, but about 500 such samples were analyzed spectrographically for some or all of the same 20 elements sought in the samples that are the subject of this report. Most of the samples were tested only for their radioactivity, but a few were analyzed chemically for uranium. The radioactivity of many of the samples tested in the early screening was determined only qualitatively. Several samples were tested at one time, and if the count obtained did not exceed a predetermined minimum above background, the samples were not tested individually. If the count was more than this minimum, the samples were tested individually to identify the radioactive sample or samples and to obtain a quantitative value for the radioactivity. In general, the rough screening served as a basis for separating samples in which the radioactivity amount to less than 0.003 percent equivalent uranium from those in which it exceeded that amount. Some aspects of various phases of the investigation of radioactivity in these samples have been reported in various other reports, as follows.

Trace Elements Investigations↗
USGS1946

Trace elements investigations in the Sweepstakes Creek area, Koyuk district, Seward Peninsula, Alaska

A significant content of radioactive material was recognized in a few placer concentrates from Sweepstakes and Rube Creeks in the Koyuk district of eastern Seward Peninsula, Alaska, when old collections were scanned for radioactivity in the spring of 1945. Subsequent field investigations with a Geiger-Mueller counter were made of the creek gravels and the placer-gold paystreak on the bench ground of Sweepstakes Creek and its tributaries, the syenite stock of Granite Mountain to the north, of Sweepstakes Creek, and the creek gravels of Rube and Anzac Creeks which are tributaries of the Peace River east of the syenite stock. The content of radioactive minerals in the gravels and in the placer-gold paystreak was found to be disappointingly low. There concentration ratios were between 45 and 169 to 1, the content of concentrates from the creek gravels is only .001 to .016 percent equivalent uranium the average content of the creek gravels in place is computed as .0001 percent equivalent uranium. The placer-gold paystreak was not accessible in place, but the content was computed as .0003 percent equivalent uranium from the sluice-box concentrates and tailings at Winder's open-cut,the only active placer mine in the area in 1945. The radioactive minerals are relatively abundant in such gravity concentrates as the sluice-box concentrates, and are particularly abundant in certain size fractions of these sluice concentrates Thus the concentrates from the aluiee-fcex, after screening through 20-mesh, showed 0.04 percent equivalent uranium. An even greater concentration of radioactive minerals is obtained in the "blowings," which represent a further cleaning of the sluice-box concontrates, one saample showing 14.20 percent equivalent uranium.

Alaska↗
USGS1959

Comparison of thickness, grade, and depth of radioactive layers as determined by gamma-ray logging and by core sampling

Thickness, grade, and depth data were obtained by analyzing gamma-ray logs and core samples from 56 diamond drill holes penetrating uranium deposits in the Colorado Plateau. The data from the two methods were compared to determine variations found in gamma-ray log interpretation and chemical and radiometric analyses of the drill core. Correlations within each parameter varied among the drilling areas analyzed. Gamma-ray interpretations of grade compared to chemical analyses were within the range of -10 to +25 percent. Most depth measurements determined by gamma-ray log interpretation compared to drill core measurement were within 0.5 percent. Results of the study indicate a need for better thickness definition in both gamma-ray logging and core scanning equipment.

Trace Elements Investigations↗
USGS2014

Standard for the U.S. Geological Survey Historical Topographic Map Collection

This document defines the digital map product of the U.S. Geological Survey (USGS) Historical Topographic Map Collection (HTMC). The HTMC is a digital archive of about 190,000 printed topographic quadrangle maps published by the USGS from the inception of the topographic mapping program in 1884 until the last paper topographic map using lithographic printing technology was published in 2006. The HTMC provides a comprehensive digital repository of all scales and all editions of USGS printed topographic maps that is easily discovered, browsed, and downloaded by the public at no cost. Each printed topographic map is scanned “as is” and captures the content and condition of each map. The HTMC provides ready access to maps that are no longer available for distribution in print. A new generation of topographic maps called “US Topo” was defined in 2009. US Topo maps, though modeled on the legacy 7.5-minute topographic maps, conform to different standards. For more information on the HTMC, see the project Web site at: http://nationalmap.gov/historical/ .

Techniques and Methods↗