USGS Science⌕ Search

SEARCH · USGS Science

Results for “Journal of the Air & Waste Management Association”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

1,689 records · Page 49Linked to original sources
USGS2024

Recent advances in characterizing the crustal stress field and future applications of stress data: Perspectives from North America

The stress field controls patterns of crustal deformation, including which faults are likeliest to cause earthquakes or transmit fluids. Since the 1950s, maps of maximum horizontal stress ( S Hmax ) orientations have advanced dramatically, and the style of faulting (relative principal stress magnitudes) has recently been mapped in some regions as well. This perspectives paper summarizes developments in characterizing stress orientations and (relative) magnitudes, including new seismic and borehole methods, as well as progress in identifying the causes of stress variations. Despite these advances, adding far more spatiotemporal detail would allow geoscientists to address many of today's key challenges regarding natural hazards, energy development, and geodynamics. In particular, it is critically important to characterize stress heterogeneity at multiple scales while also recognizing the coherent variability of the stress field. The second part of the paper considers how more detailed stress datasets could prove essential to addressing some of the grand questions in geoscience, including deciphering the poorly understood feedbacks between crustal dynamics and surface processes, improving earthquake and eruption forecasts, and determining the origins and shared properties of plate boundaries.

Geological Society, London, Special Publications↗
USGS2026

The geologic history of the Chehalis Forearc Basin, Washington State, USA

The Chehalis basin is located between the Cascade arc and the Coast Range in southwest Washington State. It consists of sedimentary and volcanic rocks deposited throughout the Cenozoic and is underlain by the Siletzia terrane, a thick, large igneous province accreted in the Eocene. Here, we constrain evolution of the Chehalis basin depocenter using isochore maps derived from isostatic gravity anomalies, borehole data, and stratigraphy for several time periods: the Eocene (47.6–36.8 Ma), the Oligocene (36.8–20 Ma), and the Neogene (20–0 Ma). Our results suggest that local subsidence is driven by deformation on faults that bound and intersect the basin. We see northward depocenter migration, interpreted as a shift in deformation from the northwest striking Cedar Creek fault to the west striking Doty fault. We interpret these data in terms of the long-term north-south shortening and clockwise rotation of the Cascadia forearc. During the Eocene, the Cedar Creek fault was preferentially aligned with north-south shortening, but became less active when clockwise rotation brought the Doty fault into east-west alignment with the stress field. Sediment accumulation rates decreased from 196 m/Myr in the Paleogene (∼40–20 Ma) to 27 m/Myr in the Neogene (∼20–0 Ma) as Miocene uplift of the Coast Range limited accommodation space and shifted the depositional environment from marine to fluvial. Our results are consistent with the geologic evolution of the Portland and Tualatin basins to the south and reveal a depositional and structural history uniquely shaped by clockwise rotation of the Cascadia forearc.

Washington↗
USGS2024

Revision of ModelMuse to support the use of PEST software with MODFLOW and SUTRA models

Executive Summary ModelMuse is a graphical user interface for several groundwater modeling programs. ModelMuse was updated to generate the input files for the parameter estimation software suite PEST. The software is used with MODFLOW or SUTRA models to run PEST-based parameter estimation and display the updated model inputs after parameter estimation. The PEST input files can also be used with the PEST++ version 5 software suite. Parameter estimation typically requires defining the parameters being adjusted during calibration and observations for assessing calibration quality. After a parameter is defined in ModelMuse, it can be applied to all or part of a model dataset. Pilot points—a parameterization device that facilitates higher levels of parameterization—can be used to assign spatially variable distributions of model inputs. Parameters can be applied to temporally varying features, such as boundary conditions, by either applying them to all the values in a series in one step or by applying separate parameters to individual members of a series. ModelMuse allows the definition of many observation types from various model output files. For MODFLOW 6 and SUTRA models, new options were added to ModelMuse to allow it to display the changed input after parameter estimation is complete. For MODFLOW–2005 and MODFLOW–NWT models, ModelMuse can import an entire model for visualization. An example illustrates the use of PEST with a MODFLOW 6 model in ModelMuse.

Techniques and Methods↗
USGS2026

Petrography and mineralogy of selected pre-Middle Jurassic basement rocks beneath the Atlantic and Gulf Coastal Plains in Florida

Florida is covered by flat-lying sedimentary strata of the Atlantic and Gulf Coastal Plains. These strata have accumulated since Middle Jurassic time. The pre-Middle Jurassic, or basement, rocks that underlie the Coastal Plain in Florida are known only from drill cores and cuttings recovered from a relatively small number of boreholes. This data report presents petrographic observations and the results of X-ray diffraction analyses of basement rocks from 18 boreholes across Florida in support of the identification, discrimination, and correlation of units for a subcrop geologic map of pre-Middle Jurassic rocks composing Florida’s sub-Coastal Plain geology.

Florida↗
USGS2025

Conceptual and numerical groundwater flow model of the Iowa River alluvial aquifer near Tama County, Iowa, 1980 through 2022

The Iowa River alluvial aquifer is an important source of water on the Meskwaki Settlement in Tama County, Iowa, which is land owned by the Sac & Fox Tribe of the Mississippi in Iowa (commonly known as the Meskwaki Nation). The U.S. Geological Survey constructed a groundwater flow model, including a conceptual and numerical model, of the Iowa River alluvial aquifer and underlying hydrogeologic units near the Meskwaki Settlement in Tama County, Iowa, for the period of January 1980–August 2022 to estimate the fraction of water pumped from the Iowa River alluvial aquifer by Meskwaki Settlement wells that is derived from streamflow depletion in the Iowa River and its tributaries. Streamflow depletion is a reduction in streamflow caused by groundwater pumping and includes the interception by groundwater production wells of water that otherwise would have been discharged to streams (called “captured groundwater discharge”) and induced infiltration of streamflow to the production wells. Calibrated model runs were performed with no simulated pumping and simulated pumping only at Meskwaki Settlement wells, and the change in simulated flow rates between the groundwater system and streams for the two model runs represents the amount of streamflow depletion in the Iowa River and tributary streams resulting from pumping at the Meskwaki Settlement wells. Streamflow depletion in the Iowa River and its tributaries as a percentage of simulated pumping at the Meskwaki Settlement wells was calculated by dividing this difference by the total simulated pumping rate for the Meskwaki Settlement wells. The model results demonstrate that the mean monthly streamflow depletion, including induced infiltration and captured discharge, in the Iowa River and its tributary streams as a percentage of mean monthly pumping at the Meskwaki Settlement wells was 97.4 percent and ranged from 65.4 to 112 percent. Of the total streamflow depletion, mean monthly induced recharge was 20.9 percent and ranged from 4.9 to 37.2 percent. Mean monthly captured discharge was 76.5 percent and ranged from 57.1 to 97.1 percent. These results indicate that most of the water pumped from the Meskwaki Settlement wells is the result of streamflow depletion, in the form of both induced infiltration and captured discharge.

Iowa↗
USGS2025

The 3D National Topography Model Call for Action—Part 2: The Next Generation 3D Elevation Program

The three-dimensional (3D) National Topography Model initiative to integrate elevation and hydrography data includes the next generation of hydrography data from the 3D Hydrography Program and the next generation of elevation data from the 3D Elevation Program (3DEP). The first-ever collection of light detection and ranging (lidar) data for the nation (IfSAR for Alaska) provides a critical baseline reference, and the addition of multiple repeat elevation mapping projects as part of the next generation of 3DEP would substantially expand analysis capabilities. As the U.S. Geological Survey (USGS) is closing in on our goal of complete coverage with 3DEP data available or in progress for 98.3 percent of the Nation at the end of fiscal year 2024, the USGS is already transitioning to the next generation of 3DEP. Based on the 3D Nation Study results and input from a broad range of stakeholders, the USGS National Geospatial Program has finalized a new design for 3DEP that provides increased lidar quality levels and refresh rates. The new program is designed with more flexibility to meet changing user needs and take advantage of improvements in mapping technologies. The program will aim to expand the level of interagency coordination for topobathymetric lidar acquisition for inland rivers. The next generation of 3DEP will also aim to emphasize research, including advancing program design, products, and services and engaging and leveraging the evolving 3D industry. Research goals also include becoming more flexible in meeting user needs and taking advantage of evolving remote-sensing technologies. The program also plans to move from focusing on producing standard products to producing a concept of a 3D Nation Ecosystem with a variety of inputs, products, and services.

Circular↗
USGS2025

A model uncertainty quantification protocol for evaluating the value of observation data

The history-matching approach to parameter estimation with models enables a powerful offshoot analysis of data worth—using the uncertainty of a model forecast as a metric for the worth of data. Adding observation data will either have no impact on forecast uncertainty or will reduce it. Removing existing data will either have no impact on forecast uncertainty or will increase it. The history-matching framework makes it possible to perform this quantitative analysis leveraging the connections among observations, model parameters, and model forecasts. We show this behavior on a specific groundwater flow model of the Mississippi Alluvial Plain and show where the analysis can be informative for considering the potential design of an observation network based on existing or potential observations.

Scientific Investigations Report↗
USGS2024

New 10Be-26Al isochron burial dating informs the Pliocene and Pleistocene evolution of the lower Colorado River, southwestern United States

Four new 10 Be- 26 Al isochron burial ages ranging from 4.4 to 2 Ma on ancestral Colorado River deposits in the lower Colorado River corridor (LCRC) help constrain the river’s evolution during the Pliocene and early Pleistocene. They help fill a gap between previous work that focused on older and younger deposits: Older dated deposits include the 5 Ma Bouse Formation, which records the integration of the Colorado River through a series of preexisting basins to the Gulf of California and the ca. 4.5 - 3.5 Ma Bullhead Alluvium, a 200 to 300 m thick aggregational package that immediately followed integration. The much younger, 100 - 70 ka, Chemehuevi Formation is another major aggradation package mapped throughout the LCRC. The new burial ages on the facies of Santa Fe Railway (4.37 ± 0.71 Ma), boulder conglomerate of Bat Cave Wash (2.12 ± 0.26 and 2.05 ± 0.31 Ma), and the Palo Verde alluvium (3.03 ± 0.26 Ma) partially fill in a 3.5 M.y. gap between the deposition of the Bullhead Alluvium and the Chemeheuvi Formation and document the timescales over which the Colorado River was able to remove the Bullhead aggradational package and initiate newer and smaller aggradational pulses.

Arizona, California, Nevada↗
USGS2025

Hydrogeologic characterization of the Cahuilla Valley and Terwilliger Valley Groundwater Basins, Riverside County, California

The relation between the groundwater and the amount of natural recharge to the Cahuilla Valley and Terwilliger Valley groundwater basins is not well understood. During the 20th century, the reliance on groundwater near Anza, California, used for agricultural, domestic, and municipal reasons has increased, and there is the potential for changes in groundwater availability related to climate change. Several types of existing data were evaluated, and new data were collected for this study, with the goal of characterizing the region’s hydrogeology. The study’s scope included constructing a geologic framework model to show where the groundwater-bearing units are present and their relation to each other, estimating the major components of the groundwater budget, and understanding local short-term and regional long-term groundwater flow and how that has changed since the early 1900s. Two electrical resistivity tomography surveys were done in the Durasno Valley about 2,150 feet apart to identify the thickness of the alluvium, its horizontal extent, and the depth-to-basement along two profiles perpendicular to Cahuilla Creek. The subsurface sediments were mostly horizontally layered and the transitional boundary between the alluvium and basement was thinner and shallower along the upgradient profile where the depth-to-basement was about 70 feet below land surface; the depth-to-basement at the downgradient profile was more than about 140 feet below land surface. The results from the surveys were used to place four monitoring wells at two sites along the survey profiles. Artesian flow from the deepest well at the downgradient site indicated that the decomposed and competent basement likely contributed some groundwater to the overlying alluvium, laterally, from below, or both. A digital three-dimensional geologic framework model was constructed using EarthVision software to represent the subsurface geometry of the alluvium, decomposed basement, and competent basement. Maps and cross sections of the modeled thicknesses of the alluvium and decomposed basement, and the modeled elevation of the top of the competent basement, were made to show the subsurface geometry of vertical faults, selected wells, and the groundwater-bearing units. Because natural recharge is related to the variable cycles of precipitation, estimates are difficult to quantify. Recharge and runoff have extreme interannual variability in the study area; recharge and runoff can be sporadic, and a substantive amount may not occur in some years. Estimates of recharge from a previous study and the regional-scale Basin Characterization Model for California for four different periods ranged from 3,800 acre-feet/year for 1897–1947 to 5,900 acre-feet/year for 1971–2000. Potential recharge from the disposal of domestic septic systems may have been as much as 500 acre-feet in 2020. It was estimated that between about 400 and 2,400 acre-feet/year of groundwater is lost through evapotranspiration by vegetation and evaporation from open water bodies, but the main source of discharge is through pumpage, mainly used for agriculture from the alluvium in the Cahuilla Valley and Terwilliger Valley groundwater basins. The estimated total pumpage for 1991–2021 ranged from about 1,140 acre-feet in 2019 to about 3,450 acre-feet in 1994. When summed, the cumulative amount of estimated pumpage between 1991 and 2021 was about 81,400 acre-feet. The general direction of groundwater flow is from the northeast along the San Jacinto fault zone at the headwaters of Cahuilla and Hamilton Creeks, to the surface-water outlets at the west and southeast parts of the study area. Groundwater-level data from the 1950s and earlier indicate that there was a natural groundwater divide between the Cahuilla Valley and Terwilliger Valley groundwater basins, but the changing magnitude and extent of the groundwater depressions caused by pumping since about 1950 indicate that the location of the natural groundwater boundary between the Cahuilla Valley and Terwilliger Valley groundwater basins has migrated over time. Flow from the upper to the lower parts of the Cahuilla Valley groundwater basin roughly follows the course of Cahuilla Creek through the narrow Durasno Valley where an estimated volume of flow in April 2019 was about 10–150 acre-feet/year. Short-term trends in groundwater levels, particularly in wells where groundwater is shallow and in the basement unit, show how some areas respond quickly to recharge and discharge. Wells located further to the east within the Cahuilla Valley groundwater basin in the alluvium show much less of a response to recharge events; areas of sustained pumpage from the alluvium, primarily for agriculture, show long-term declines in groundwater levels and generally do not show the effects of storm events or recent runoff. Groundwater levels in wells that are farthest from where most of the recharge occurs and where pumping has been the greatest, had some of the largest long-term groundwater-level declines at a rate of about 0.8 foot/year between 1971 and 2021.

California↗
USGS2023

3D Dynamic rupture modeling of the 6 February 2023, Kahramanmaraş, Turkey Mw 7.8 and 7.7 earthquake doublet using early observations

The 2023 Turkey earthquake sequence involved unexpected ruptures across numerous fault segments. We present 3D dynamic rupture simulations to illuminate the complex dynamics of the earthquake doublet. Our models are constrained by observations available within days of the sequence and deliver timely, mechanically consistent explanations of the unforeseen rupture paths, diverse rupture speeds, multiple slip episodes, heterogeneous fault offsets, locally strong shaking, and fault system interactions. Our simulations link both earthquakes, matching geodetic and seismic observations and reconciling regional seismotectonics, rupture dynamics, and ground motions of a fault system represented by 10 curved dipping segments and embedded in a heterogeneous stress field. The M w 7.8 earthquake features delayed backward branching from a steeply branching splay fault, not requiring supershear speeds. The asymmetrical dynamics of the distinct, bilateral M w 7.7 earthquake are explained by heterogeneous fault strength, prestress orientation, fracture energy, and static stress changes from the previous earthquake. Our models explain the northward deviation of its eastern rupture and the minimal slip observed on the Sürgü fault. 3D dynamic rupture scenarios can elucidate unexpected observations shortly after major earthquakes, providing timely insights for data‐driven analysis and hazard assessment toward a comprehensive, physically consistent understanding of the mechanics of multifault systems.

The Seismic Record↗
USGS2024

Tungsten skarn quantitative mineral resource assessment and gold, rare earth elements, graphite, and uranium qualitative assessments of the Kuldjuktau and Auminzatau Ranges, in the central Kyzylkum region, Uzbekistan

A new quantitative mineral resource assessment for tungsten skarn was conducted for the Auminzatau and Kuldjuktau mountain ranges in Central Uzbekistan, along with qualitative assessments of orogenic gold, rare earth elements (REEs), amorphous graphite, and uranium. By integrating a variety of geological, geochemical, geophysical, and remote sensing data sets, estimates of undiscovered tungsten skarn deposits in permissive tracts are combined with grade and tonnage distributions of known deposits to generate probabilistic estimates of undiscovered resources. Undiscovered deposits in Auminzatau are estimated to contain median resources of 98 thousand metric tons (kt) of WO 3 with a 70 percent (%) probability of at least 28 kt and a 10% probability of at least 468 kt, of which 16 kt to 293 kt may be economic to extract. In Kuldjuktau, the undiscovered deposits are estimated to contain median resources of 27 kt of WO 3 with a 60% probability of at least 12 kt and a 10% probability of at least 208 kt, of which 5 kt to 132 kt may be economic to extract. Our results suggest that the Auminzatau–Kuldjuktau Mountains area is highly prospective for additional discovery of significant Au and U resources and has low prospectivity for discovery of significant REE and graphite resources.

Minerals↗
USGS2023

Eruptive history within the vicinity of Al Madīnah in northern Harrat Rahat, Kingdom of Saudi Arabia

The northernmost part of the Harrat Rahat volcanic field contains early Pleistocene to Holocene mafic eruptive products within the vicinity of the city of Al Madīnah, Kingdom of Saudi Arabia. A detailed geologic investigation into the eruptive history of a 570 square kilometer (km 2 ) area covering Al Madīnah and the surrounding area has yielded 33 mapped Quaternary volcanic units consisting of lava flows, scoria cones, and shield volcanoes. These eruptive products consist of continental, intraplate alkalic and minor transitional basalts, hawaiites, and a single mugearite that were emplaced from at least 1,014±14 thousand years ago (ka) to a single Holocene eruption in 1256 C.E. Lava flows are generally 10 to 15 kilometers (km) long (but can reach 23 km long), 1 to 3 km wide, and at least 10 meters thick. Most of the mapped units erupted episodically between 400 and 340 ka and 180 and 100 ka. Despite small individual volumes (less than 1 cubic kilometers dense rock equivalent), each unit represents eruption of a distinct magma batch that was strongly influenced by clinopyroxene, olivine, and plagioclase fractionation. Some of these units are interpreted to have undergone magma mixing pre- and (or) syneruptively. Integrating eruption ages, geochemistry, and paleomagnetic data yields evidence that some eruptions were temporally and (or) spatially clustered. Aligned scoria cones and elongate vent edifices were constructed atop fissure vent systems that reflect the local stress field, which controls dike ascent through the middle and upper crust.

Professional Paper↗
USGS1999

Water-quality assessment of south-central Texas — Descriptions and comparisons of nutrients, pesticides, and volatile organic compounds at three intensive fixed sites, 1996-98

Water-quality samples were collected during April 1996-April 1998 at three intensive fixed sites in the San Antonio region of the South-Central Texas study unit as part of the U.S. Geological Survey National Water-Quality Assessment Program. The sampling strategy for the intensive fixed-site assessment is centered on obtaining information about the occurrence and seasonal patterns of selected constituents including nutrients, pesticides, and volatile organic compounds. The three sites selected to determine the effects of agriculture and urbanization on surface-water quality in the study unit are Medina River at LaCoste (agriculture indicator site), Salado Creek (lower station) at San Antonio (urban indicator site), and San Antonio River near Elmendorf (integrator site). Concentrations of two nutrients, dissolved nitrite plus nitrate nitrogen and total phosphorus, were largest at the integrator site, which is downstream of municipal wastewater treatment plants. Nitrite plus nitrate nitrogen concentrations at this site often exceeded the U.S. Environmental Protection Agency (EPA) maximum contaminant level (MCL) for drinking water. All total phosphorus concentrations at the site exceeded the EPA recommended maximum concentration for streams not discharging directly into reservoirs. Nitrite plus nitrate nitrogen concentrations at the integrator site tended to be smaller, and total phosphorus concentrations at the urban site tended to be larger in samples collected during stormflow than during base flow. The most detections and largest concentrations of three pesticides (atrazine, diazinon, and prometon) were in samples collected at the urban site. Some pesticide concentrations at the agriculture site showed a seasonal pattern of increasing concentrations during spring, the peak application season. Four pesticides (atrazine, deethylatrazine, diazinon, and prometon) were detected in at least 38 percent of samples collected at all three sites. The concentrations of all detected pesticides that have an MCL were less than the MCL at the three sites. More volatile organic compounds (VOC) were detected at the urban indicator site than at the agriculture indicator site, mostly likely because more sources are located in urbanized areas. The most VOCs detected and the largest concentrations of two VOCs (chloroform and tetrahydrofuran) were in samples from the integrator site. More VOCs were detected in samples collected at the integrator site during stormflow than during base flow. The concentrations of all detected VOCs that have an MCL were less than the MCL at the three sites.

Texas↗
USGS2026

The eruptive behavior of distributed volcanism forming low shield edifices—A case study of Sentinel-Arlington volcanic field, U.S.A.

Distributed volcanic fields are present in various tectonic settings worldwide, and their characteristics reflect differing influences from magmatic and tectonic processes. In the southwestern United States alone, there are 37 Quaternary distributed volcanic fields. After the primary period of extensional tectonics in the southern Basin and Range 15–5 million years ago, the Sentinel-Arlington volcanic field developed in southwestern Arizona between 4 and 1 million years ago. The Sentinel-Arlington volcanic field consists primarily of low relief shield volcanoes, a type of distributed volcanism with poorly understood temporal evolution. The Sentinel-Arlington volcanic field is less than 200 kilometers (km) from the Colorado Plateau, Gulf of California, and southern San Andreas Fault system. This work identifies and examines controls on the emplacement of the Sentinel-Arlington volcanic field by documenting shallow and surficial structures as well as eruption characteristics and style through time. The Sentinel-Arlington volcanic field consists of 21 volcanoes with a total of 33 vents over an area of about 770 square kilometers (km 2 ). The prominence of low relief shield volcanoes may be explained by ascent of basaltic magmas through thin Basin and Range crust, without much crustal contamination, and low viscosities common to mafic compositions. Typical eruption characteristics involve the construction of low relief shield volcanoes followed by Strombolian fissure eruptions at the summits or near-summit medial areas that produce scoria lapilli, which may weld to form agglomerate. The total lifetime erupted volume of about 4.3 cubic kilometers (km 3 ) represents an average eruptive flux of approximately 2x10 -3 km 3 per thousand years (k.y.). This erupted volume is low relative to Neogene basaltic intraplate distributed volcanic fields worldwide, which typically range from 10 -3 to 1 km 3 k.y. -1 . Sentinel-Arlington volcanic field eruptions were likely triggered by intermittent rejuvenation of transient magmatic zones that exist in thinned crust. Instantaneous flux from point sources feeding the lava flows is estimated to be on the order of 10 -1 to 10 cubic meters per second.

Arizona↗
USGS2026

Evidence for a biological origin of uranium-rich carbon masses within the Ediacaran Salt Range Formation of Pakistan

Thucholites are unique organic structures found in igneous and sedimentary rocks composed of a U-C-rich interior enclosed by an organic outer shell. Their formation and occurrence have perplexed scientists for over 100 years. Typically, thucholites are sparse in sedimentary rocks but where found in abundance, they may be the result of rapid paleoecological disruptions, e.g., volcanic ashfall. Here, we evaluated thucholites from the Ediacaran Salt Range Formation of the Indus Basin in Pakistan using field emission scanning electron microscopy (FESEM) and nanoscale secondary ion mass spectroscopy (NanoSIMS) to propose a two-stage mechanism for thucholite development. NanoSIMS results suggest organic matter in thucholite cores formed by biological fractionation (represented by the presence of lighter 13 C/ 12 C and 34 S/ 32 S) while the outer organic mantle formed via radiolysis-induced polymerization. FESEM elemental analysis confirms compositional differences between the two thucholite components (core and mantle), further implying their contrasting origins. Dimensional comparison of thucholite cores and their U-bearing mineral morphologies to ancient and modern U-biomineralized microbes suggests that the thucholite cores formed from metal-biological interactions. The presence of volcanogenic biotite, alkali feldspar, and clay spherules (interpreted as devitrified volcanic glass) with thucholite suggests that the thucholite cores in the Salt Range Formation are biological responses to rapid paleoenvironmental change from volcanic eruption which preserved the fossilized morphologies of Proterozoic microorganisms.

Salt Range↗