Results for “Geology” — Page 49

USGS2008

Geologic assessment of undiscovered, technically recoverable coalbed-gas resources in Cretaceous and Tertiary rocks, North Slope, and adjacent state waters, Alaska

The purpose of the U.S. Geological Survey's (USGS) National Oil and Gas Assessment is to develop geology-based hypotheses regarding the potential for additions to oil and gas reserves in priority areas of the United States, focusing on the distribution, quantity, and availability of oil and natural gas resources. The USGS has completed an assessment of the undiscovered, technically recoverable coalbed-gas resources in Cretaceous and Tertiary rocks underlying the North Slope and adjacent State waters of Alaska (USGS Northern Alaska Province 5001). The province is a priority Energy Policy and Conservation Act (EPCA) province for the National Assessment because of its potential for oil and gas resources. The assessment of this province is based on geologic principles and uses the total petroleum system concept. The geologic elements of a total petroleum system include hydrocarbon source rocks (source rock maturation, hydrocarbon generation and migration), reservoir rocks (stratigraphy, sedimentology, petrophysical properties), and hydrocarbon traps (trap formation and timing). In the Northern Alaska Province, the USGS used this geologic framework to define one composite coalbed gas total petroleum system and three coalbed gas assessment units within the petroleum system, and quantitatively estimated the undiscovered coalbed-gas resources within each assessment unit.

Alaska↗

USGS2023

The EDMAP Program: Training the next generation of geologic mappers

Introduction Detailed geologic maps are the basis of most earth science investigations and can be used for natural hazard mitigation, resource identification and exploration, infrastructure planning, and more. As a part of the U.S. Geological Survey (USGS) congressionally mandated National Cooperative Geologic Mapping Program (NCGMP), the EDMAP program (referred to as EDMAP) is a partnership between the USGS and participating colleges and universities that provides mentorship and training opportunities for earth science students nationwide. EDMAP supports graduate students and upper-level undergraduate students—under the guidance of a faculty member who serves as a “principal investigator”—for the training of students to become geologic mappers. Between 1996 and 2021, EDMAP funded geologic mapping educational experiences and training for 1,373 students at more than 170 universities.

Fact Sheet↗

USGS2019

Geologic field photograph map of the Grand Canyon region, 1967–2010

The Grand Canyon geologic field photograph collection contains 1,211 geotagged photographs collected during 43 years of geologic mapping from 1967 to 2010. The photographs document some key geologic features, structures, and rock unit relations that were used to compile nine geologic maps of the Grand Canyon region published at 1:100,000 scale, and many more maps published at 1:24,000 scale. Metadata for each photograph include description, date captured, coordinates, and a keyword system that places each photograph in one or more of the following categories: arches and windows, breccia pipes and collapse structures, faults and folds, igneous rocks, landslides and rockfalls, metamorphic rocks, sedimentary rocks, sinkholes, and springs and waterfalls. Original photograph slides are available at the Northern Arizona University Cline Library Special Collections and Archives. The Geologic Field Photograph Map of the Grand Canyon Region, 1967–2010, is an interactive online map application that shows clusters of photograph thumbnails and popup windows that scale as users pan, zoom, and click around the map. The photographs can be filtered by category, searched based on date range, description, and keywords, and (or) downloaded. All information populated within the map is served from a ScienceBase record of the Grand Canyon field photograph collection that can be accessed at https://doi.org/10.5066/F7WS8SHW .

Arizona↗

USGS1982

Geologic and structure map of the Choteau 1° x 2° quadrangle, western Montana: A digital database

The geologic and structure map of Choteau 1 x 2 degree quadrangle (Mudge and others, 1982) was originally converted to a digital format by Jeff Silkwood (U.S. Forest Service and completed by the U.S. Geological Survey staff and contractor at the Spokane Field Office (WA) in 2000 for input into a geographic information system (GIS). The resulting digital geologic map (GIS) database can be queried in many ways to produce a variey of geologic maps. Digital base map data files (topography, roads, towns, rivers and lakes, etc.) are not included: they may be obtained from a variety of commercial and government sources. This database is not meant to be used or displayed at any scale larger than 1:250,000 (e.g. 1:100,000 or 1:24,000. The digital geologic map graphics and plot files (chot250k.gra/.hp/.eps and chot-map.pdf) that are provided in the digital package are representations of the digital database. They are not designed to be cartographic products.

Montana↗

USGS1986

Quaternary geologic map of the Hatteras 4° x 6° quadrangle, United States

This map is part of the Quaternary Geologic Atlas of the United States (I-1420). It was first published as a printed edition in 1986. The geologic data have now been captured digitally and are presented here along with images of the printed map sheet and component parts as PDF files. The Quaternary Geologic Map of the Hatteras 4° x 6° Quadrangle was mapped as part of the Quaternary Geologic Atlas of the United States. The atlas was begun as an effort to depict the areal distribution of surficial geologic deposits and other materials that accumulated or formed during the past 2+ million years, the period that includes all activities of the human species. These materials are at the surface of the Earth. They make up the "ground" on which we walk, the "dirt" in which we dig foundations, and the "soil" in which we grow crops. Most of our human activity is related in one way or another to these surface materials that are referred to collectively by many geologists as regolith, the mantle of fragmental and generally unconsolidated material that overlies the bedrock foundation of the continent. The maps were compiled at 1:1,000,000 scale.

Hatteras quadrangle↗

USGS1991

Quaternary geologic map of the Blue Ridge 4° x 6° quadrangle, United States

This map is part of the Quaternary Geologic Atlas of the United States (I-1420). It was first published as a printed edition in 1986. The geologic data have now been captured digitally and are presented here along with images of the printed map sheet and component parts as PDF files. The Quaternary Geologic Map of the Blue Ridge 4° x 6° Quadrangle was mapped as part of the Quaternary Geologic Atlas of the United States. The atlas was begun as an effort to depict the areal distribution of surficial geologic deposits and other materials that accumulated or formed during the past 2+ million years, the period that includes all activities of the human species. These materials are at the surface of the earth. They make up the "ground" on which we walk, the "dirt" in which we dig foundations, and the "soil" in which we grow crops. Most of our human activity is related in one way or another to these surface materials that are referred to collectively by many geologists as that overlies the bedrock foundation of the continent. The maps were compiled at 1:1,000,000 scale.

Kentucky, Maryland, North Carolina, Ohio, Pennsylv↗

USGS1994

Quaternary Geologic Map of the Platte River 4 Degrees x 6 Degrees Quadrangle, United States

The Quaternary Geologic Map of the Platte River 4 degree x 6 degree Quadrangle was mapped as part of the Quaternary Geologic Atlas of the United States. The atlas was begun as an effort to depict the areal distribution of surficial geologic deposits and other materials that accumulated or formed during the past 2+ million years, the period that includes all activities of the human species. These materials are at the surface of the earth. They make up the 'ground' on which we walk, the 'dirt' in which we dig foundations, and the 'soil' in which we grow crops. Most of our human activity is related in one way or another to these surface materials that are referred to collectively by many geologists as regolith, the mantle of fragmental and generally unconsolidated material that overlies the bedrock foundation of the continent. The maps were compiled at 1:1,000,000 scale. This map is part of the Quaternary Geologic Atlas of the United States (I-1420). It was first published as a printed edition in 1994. The geologic data have now been captured digitally and are presented here along with images of the printed map sheet and component parts as PDF files.

IMAP↗

USGS1994

Quaternary Geologic Map of the Des Moines 4 Degrees x 6 Degrees Quadrangle, United States

The Quaternary Geologic Map of the Des Moines 4 degree x 6 degree Quadrangle was mapped as part of the Quaternary Geologic Atlas of the United States. The atlas was begun as an effort to depict the areal distribution of surficial geologic deposits and other materials that accumulated or formed during the past 2+ million years, the period that includes all activities of the human species. These materials are at the surface of the earth. They make up the 'ground' on which we walk, the 'dirt' in which we dig foundations, and the 'soil' in which we grow crops. Most of our human activity is related in one way or another to these surface materials that are referred to collectively by many geologists as regolith, the mantle of fragmental and generally unconsolidated material that overlies the bedrock foundation of the continent. The maps were compiled at 1:1,000,000 scale. This map is part of the Quaternary Geologic Atlas of the United States (I-1420). It was first published as a printed edition in 1994. The geologic data have now been captured digitally and are presented here along with images of the printed map sheet and component parts as PDF files.

IMAP↗

USGS1989

Surficial geologic map of the Meeker 30' x 60' quadrangle, Garfield, Moffat, Rio Blanco and Routt Counties, Colorado

This map is one of a series of four 30' x 60' surficial geologic maps (1:100,000 scale) intended to provide basic geologic information for planning for energy resource development and growth in northwestern Colorado. An effort is made to characterize all surficial materials, regardless of origin. Hence, residuum is given much more emphasis than is customary, and this results in several departures from conventional geologic maps: bedrock geology is deemphasized; the part of the map symbol denoting geologic age is omitted for surficial units because all surficial units shown are believed to be of Quaternary age; and faults are not shown because none in this map area was observed to displace surficial materials. Few exposures of most map units exist, except in manmade excavations, such as gravel pits and road cuts. Consequently, thicknesses usually are estimated, and data on stratification, clast size, and relative proportions of matrix and framework clasts are limited to a few localities for each map unit. The Wentworth scale is used to describe grain sizes. Mapping was done chiefly on aerial photographs taken in 1953. Hence, landslides and modifications resulting from gravel mining since 1953 may not show on this map. The scales of the aerial photographs (about 1:60,000) and the map (1:100,000) governed the minimum size of the deposits mapped. The minimum thickness of the depostis mapped is about 1.5m in most places. Deposit thickness, although not a mapping criterion, influences the topographic expression of many landforms, and landform is the basis for delineating the surficial deposits shown.

Colorado↗

USGS1991

Surficial geologic map of the Walden 30' x 60' quadrangle, Jackson, Larimer, and Routt counties, Colorado

This map is one of a series of four 30' x 60' surficial geologic maps (1:100,000 scale) intended to provide basic geologic information for planning for energy resource development and growth in northwestern Colorado. An effort is made to characterize all surficial materials, regardless of origin. Hence, residuum is given much more emphasis than is customary, and this results in several departures from conventional geologic maps: bedrock geology is deemphasized; the part of the map symbol denoting geologic age is omitted for surficial units because all surficial units shown are believed to be of Quaternary age; and faults are not shown because none in this map area was observed to displace surficial materials. Few exposures of most map units exist, except in manmade excavations, such as gravel pits and road cuts. Consequently, thicknesses usually are estimated, and data on stratification, clast size, and relative proportions of matrix and framework clasts are limited to a few localities for each map unit. The Wentworth scale is used to describe grain sizes. Mapping was done chiefly on aerial photographs taken in 1953. Hence, landslides and modifications resulting from gravel mining since 1953 may not show on this map. The scales of the aerial photographs (about 1:60,000) and the map (1:100,000) governed the minimum size of the deposits mapped. The minimum thickness of the depostis mapped is about 1.5m in most places. Deposit thickness, although not a mapping criterion, influences the topographic expression of many landforms, and landform is the basis for delineating the surficial deposits shown.

Colorado↗

USGS1991

Surficial geologic map of the Steamboat Springs 30' x 60' quadrangle, Grand, Jackson, and Routt counties, Colorado

This map is one of a series of four 30' x 60' surficial geologic maps (1:100,000 scale) intended to provide basic geologic information for planning for energy resource development and growth in northwestern Colorado. An effort is made to characterize all surficial materials, regardless of origin. Hence, residuum is given much more emphasis than is customary, and this results in several departures from conventional geologic maps: bedrock geology is deemphasized; the part of the map symbol denoting geologic age is omitted for surficial units because all surficial units shown are believed to be of Quaternary age; and faults are not shown because none in this map area was observed to displace surficial materials. Few exposures of most map units exist, except in manmade excavations, such as gravel pits and road cuts. Consequently, thicknesses usually are estimated, and data on stratification, clast size, and relative proportions of matrix and framework clasts are limited to a few localities for each map unit. The Wentworth scale is used to describe grain sizes. Mapping was done chiefly on aerial photographs taken in 1953. Hence, landslides and modifications resulting from gravel mining since 1953 may not show on this map. The scales of the aerial photographs (about 1:60,000) and the map (1:100,000) governed the minimum size of the deposits mapped. The minimum thickness of the depostis mapped is about 1.5m in most places. Deposit thickness, although not a mapping criterion, influences the topographic expression of many landforms, and landform is the basis for delineating the surficial deposits shown.

Colorado↗

USGS1988

Subsurface geology of Paleozoic, Mesozoic, and Cenozoic units in southeast Missouri

The U.S. Geological Survey is conducting a regional water-resources investigation of the Gulf Costal Plain, which includes all of the Mississippi Alluvial Plain of southeastern Missouri, locally known as the southeast lowlands. The purpose of the regional study is to describe and evaluate the major aquifer systems in sediments of Tertiary and younger age in parts of 10 states (Grubb, 1984). In the southeast lowlands of Missouri, the sub-surface stratigraphy and structural configuration of geologic units need to be described in detail to define the major aquifer syustems in the area. The purpose of this report is to describe the subsurface geologic framework for Paleozoic, Mesozoic, and Cenozoic units in the southeast lowlands of Missouri and to correlate these units to those in adjecent States using geophysical and geologic methods (index map). Geophysical logs of wells were used to determine which units are aquifers or confining beds. The drilling of the U.S. Geological Survey test well 1-X in New Madrid County, Missouri, and the subsequent interpretation of geohydrologic data from the well have provided valuable information used in the preparation of this report.

Missouri↗

USGS1989

Geologic map of the Latir Volcanic Field and adjacent areas, northern New Mexico

This map was first published as a printed edition in 1989. The geologic data have now been captured digitally and are presented here along with images of the printed map sheet and component parts as PDF files. This map encompasses all or parts of ten 7.5 minute quadrangles in the Taos Range of the Sangre de Cristo Mountains in northern New Mexico. Geologic mapping was initiated in this area by the U.S. Geological Survey in response to its mandate under the Wilderness Act of 1964 to evaluate the mineral resource potential of the Latir and Wheeler Peak Wildernesses and the Columbine-Hondo Wilderness Study Area in the Carson National Forest. The mapping was later extended to adjacent areas in order to better understand the regional geology and geologic history of the range. The present map focuses on the early Tertiary (largely Oligocene) Latir Volcanic Field and plutonic rocks associated with it. The basement rocks in the map area are Paleoproterozic amphibolite-facies metasedimentary and metavolcanic rocks intruded by large bodies of quartz monzonite, granodiorite and gabbro dated at between 1,750 and 1,690 Ma. The basement rocks are locally overlain by Mississippian limestone or by Pennsylvanian and Permian redbeds. The basement rocks were thrust eastward across a thick section of similar late Paleozoic rocks along low-angle faults during the Laramide Orogeny. Post-Laramide erosion largely removed the sedimentary cover from the basement rocks and reduced the topography to a low-relief surface locally overlain by scattered lenses of Eocene to Oligocene shale, sandstone, and conglomerate. It was on this surface that the earliest rocks of the Latir Volcanic Field were deposited, beginning in the Oligocene, about 30 Ma. The early volcanic rocks comprise a thick sequence of andesite, dacite, and minor rhyolite, deposited as flows, breccia, and volcaniclastic sediments from numerous local volcanic centers; thin layers of rhyolite tuff are from distant eruptions, some probably in the San Juan Mountains. These volcanic rocks probably record early growth of an upper-crustal batholith. At 25 Ma enormous eruptions of peralkaline rhyolite ash-flow tuff were accompanied by collapse of the roof of the growing batholith to form the Questa Caldera, a volcanic depression at least 14 km across. The ash flows traveled for tens of kilometers from the caldera rims to form a widespread sheet of densely welded tuff; ash also fell back to fill the subsiding caldera depression. Concurrent extension along northwest-trending faults segmented the volcanic edifice and rotated the originally sub-horizontal layers, so that some are nearly vertical. Formation of the caldera was accompanied by further batholith growth, involving intrusion of large plutons of granite, granodiorite, and related rocks into both caldera fill and the adjacent rocks, including both the earlier volcanic rocks and the basement rocks. The large molybdenum deposit along the Red River east of Questa is related to the emplacement of one of these late granitic plutons. Intrusive activity continued into the Miocene. Development of the Rio Grande Rift beginning at about 15 Ma was accompanied by development of the north-south trending normal faults along the western foot of the Taos Range. The rift is filled with thousands of meters of clastic sediments interleaved with basalt flows, some as young as 3.6 Ma. The bounding faults of the rift cut the Questa Caldera so that the western part of the original structure is now deeply buried beneath the rift fill.

New Mexico↗

USGS1995

Geologic map and structure sections of the Clear Lake Volcanics, Northern California

The Clear Lake Volcanics are located in the California Coast Ranges about 150 km north of San Francisco. This Quaternary volcanic field has erupted intermittently since 2.1 million years ago. This volcanic field is considered a high-threat volcanic system (Ewert and others, 2005) The adjacent Geysers geothermal field, largest power-producing geothermal field in the world, is powered by the magmatic heat source for the volcanic field. This report consists of three sheets that include the geologic map, one table, two figures, three cross sections, description of map units, charts of standard and diagrammatic correlation of map units, and references. This map supersedes U.S. Geological Survey Open-File Report 76-751. Descriptions of map units are grouped by geographic area. Summaries of the evolution, chemistry, structure, and tectonic setting of the Clear Lake Volcanics are given in Hearn and others (1981) and Donnelly-Nolan and others (1981). The geology of parts of the area underlain by the Cache Formation is based on mapping by Rymer (1981); the geology of parts of the areas underlain by the Sonoma Volcanics, Franciscan assemblage, and Great Valley sequence is based on mapping by McLaughlin (1978). Volcanic compositional map units are basalt, basaltic andesite, andesite, dacite, rhyodacite, and rhyolite, based on SiO2 content. Included in this report are maps showing the distribution of volcanic rocks through time and a chart showing erupted volumes of different lava types through time. A table gives petrographic data for each map unit by mineral type, abundance, and size. Most ages are potassium-argon (K/Ar) ages determined for whole-rock samples and mineral separates by Donnelly-Nolan and others (1981), unless otherwise noted. A few ages are carbon-14 ages or were estimated from geologic relationships. Magnetic polarities are from Mankinen and others (1978; 1981) or were determined in the field by B.C. Hearn, Jr., using a portable fluxgate magnetometer. Thickness for most units is estimated from topographic relief except where drill-hole data were available.

California↗

USGS1995

Geologic and topographic maps of the Elysium Paleolake basin, Mars

These geologic and topographic maps show a basin in the Elysium region of Mars that is thought to have been the site of a large paleolake during the most recent period (Amazonian) in Mars’ history (Scott and Chapman, 1991b). The basin, referred to as the Elysium basin, extends for more than 2,000 km across the lowland plains (fig. 1). It is important, not only geologically, but because the amount, location, and duration of liquid water that it may have contained would have been critical factors governing the possible origin and survival of life on Mars. The Elysium basin is the only large depositional basin on Mars where direct evidence, both geologic and topographic, of former water levels and spillways has been found. However, indications of possible paleoshorelines have been observed in several other areas along the highland-lowland boundary (described under Geologic and Physiographic Setting; Parker and others, 1989; De Hon and Pani, 1992; Scott and others, 1992). Our study of the Elysium basin had two objectives, to determine (1) the maximum extent of the basin and (2) the former volume of water in the basin and the sources of this water. To fulfill these objectives, we have compiled this sets of maps. The geologic maps shows the source channels and circumbasin materials, and the topographic map of the paleolake, on a new topographic base, shows former shorelines and drainage channels.

IMAP↗

USGS2006

Geologic Map of Loudoun County, Virginia

Introduction The geology of Loudoun County, Va., was mapped from 1988 through 1991 under a cooperative agreement between the U.S. Geological Survey (USGS) and the Loudoun County Office of Mapping and Geographic Information. This geologic map was compiled in 1993 from a series of detailed published and unpublished field investigations at scales of 1:12,000 and 1:24,000. Some of these same data were compiled as a digital geologic map at 1:100,000 scale (Burton and others, 1992a) and were the basis for a cost-benefit analysis of the societal value of geologic maps (Bernknopf and others, 1993).

IMAP↗

USGS1998

Geologic map of the western part of the Cut Bank 1° x 2° quadrangle, northwestern Montana

The paper geologic map of the western part of the Cut Bank 1° x 2° quadrangle, northwestern Montana (Harrison and others, 1998) was digitized and initially attributed by the Montana Bureau of Mines and Geology (MBMG) and remitted to the U.S. Geological Survey for further attribution and publication of the geospatial digital files. The resulting digital geologic map GIS can be queried in many ways to produce a variety of geological maps.

Montana↗

USGS2000

Geologic map of the Littlefield 30' x 60' quadrangle, Mohave County, northwestern Arizona

This map is one result of the U.S. Geological Survey's intent to provide geologic map coverage and a better understanding of the transition in regional geology between the Basin and Range and Colorado Plateaus in southeastern Nevada, southwestern Utah, and northwestern Arizona. Information gained from this regional study provides a better understanding of the tectonic and magmatic evolution of an area of extreme contrasts in late Mesozoic-early Tertiary compression, Cenozoic magmatism, and Cenozoic extension. This map is a synthesis of 32 new geologic maps encompassing the Littlefield 30' x 60' quadrangle, Arizona. Geologic information presented in this map and report may aid future land management decisions about land use, flood control, and environmental and range management programs for federal, state, and private agencies. The Littlefield 30' x 60' quadrangle encompasses approximately 3,100 km2 (1,937 mi2) of northwestern Arizona. The map area is bordered on the north by the Utah-Arizona state line and is approximately 5 km east of the Nevada- Arizona state line (see map). The quadrangle is bounded by long 113? to 114? and lat 36?30' to 37?. The east three-quarters of the map area is within the southwestern part of the Colorado Plateaus province (herein referred to as the Colorado Plateau), and the west quarter is within the Basin and Range province.

IMAP↗