SEARCH · USGS Science

Results for “Frontiers in Ecology and Environment”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

1,673 records · Page 49Linked to original sources

USGS2025

Hydrogeology of unconsolidated and bedrock aquifers along the Salmon River, including Malone, Franklin County, New York

The U.S. Geological Survey, in cooperation with the New York State Department of Environmental Conservation, investigated the hydrogeology of the unconsolidated and bedrock aquifers along the Salmon River corridor in northern Franklin County, New York. The study area covers roughly 147 square miles and includes the village of Malone and parts of the Towns of Malone, Bellmont, Burke, Constable, Westville, Bangor, Duane, and Franklin, New York. Groundwater is the primary source for water supply within the study area. Eighty-three percent of all residents use public water supplied from two production wells that draw water from a thick, highly productive sand-and-gravel aquifer likely receiving induced infiltration from the Salmon River. Twenty-four percent of the 187 verified domestic wells in the study area outside of the production well service area boundary are screened in typically discontinuous deposits of stratified sand and sand and gravel. Seventy-six percent of the wells are completed in bedrock aquifers including the Potsdam Sandstone, metamorphic rocks, Theresa Formation, and unknown bedrock. Characterizing and understanding potential groundwater resources is critical for protecting the quality of the groundwater. The information in this report may be used to guide delineation of groundwater contributing areas, assess potential threats to aquifers from both point and nonpoint sources, respond to contamination from spills or leaks from underground storage facilities or other sources, and to support assessments for future development of municipal water supplies.

New York↗

USGS2024

Using stable oxygen isotope dual-inlet isotope-ratio mass spectrometry to elucidate uranium transport and mixed 230Th/U calcite formation ages at the seminal Devils Hole, Nevada, natural laboratory

Rationale Vein calcite in Devils Hole has been precipitating continuously in oxygen-isotope equilibrium at a constant temperature for over 500 000 years, providing an unmatched δ 18 O paleoclimate time series. A substantial issue is that coeval calcite (based on matching δ 18 O values) has uranium-series ages differing by 12 000 years. Methods An unparalleled high-accuracy δ 18 O chronology series from continuously submerged calcite was used to correct the published uranium-series ages of non-continuously formed calcite in two cores, cyclically exposed by water-table decline during glacial–interglacial transitions. This method relies on the premise that the δ 18 O values of coevally precipitated calcite are identical, allowing matching calcite δ 18 O values to establish formation ages. Results Exposed calcite can have apparent ages that are 12 000 years too young due to unrecognized uranium mobility and resulting mixed ages identified in over 50 mixed uranium-series ages from previous studies. Secondary uranium in fluids, sourced from the formation or dissolution of porous carbonate deposits (folia) with high uranium-238 ( 238 U) concentrations, has migrated up to 10 mm into vein calcite. Conclusions The continuously submerged Devils Hole δ 18 O chronology is not explained by orbital forcing. Rather, this chronology represents a regional climate record in the southern Great Basin of sea-surface-temperature (SST) variations off California, variations that preceded the last and penultimate deglaciations by 5000 to approximately 10 000 years. Temporal discrepancies between the continuously submerged Devils Hole chronology and other regional δ 18 O records (e.g., the Leviathan chronology) can be explained by unrecognized cryptic, pernicious uranium mobility, leading to model estimations that may be thousands of years younger than actual ages. Consequently, paleo-moisture availability, water-table, and groundwater recharge models based on these mixed uranium-series ages are too young by as much as 12 000 years. The potential for post-formation uranium addition in subaerial cores and speleothems underscores the need for caution in uranium-series dating, highlighting δ 18 O time-series comparisons as a method for identifying mixed ages.

Nevada↗

USGS2025

Using subducting plate motion to constrain Cascadia slab geometry and interface strength

Subduction zones are home to multiple geohazards driven by the evolution of the regional tectonics, including earthquakes, volcanic eruptions and landslides. Past evolution builds the present-day structure of the margin, while the present-day configuration of the system determines the state-of-stress in which individual hazardous events manifest. Regional simulations of subduction zones provide a tool to synthesize the tectonic history of a region and investigate how geologic features lead to variations in the state of stress across the subduction system. However, it is challenging to design regional models that provide a force-balance that is consistent with the large-scale motion of surrounding tectonic plates while also not over-constraining the solution. Here, we present new models for the Cascadia subduction zone that meet these criteria and demonstrate how the motion of the subducting Juan de Fuca plate can be used to determine the along-strike variations in the viscous (long-term) coupling across the plate boundary. All successful models require lower viscous coupling in the northern section of the trench compared to the central and southern sections. However, due to uncertainties in the geometry of the Cascadia slab, we find that there is a trade-off between along-strike variation in viscous coupling and slab shape. Better constraints on the slab shape, and/or use of other observations are needed to resolve this trade-off. The approach presented here provides a framework for further exploring how geologic features in the overriding plate and the properties of the plate boundary region affect the state-of-stress across this and other subduction zones.

Cascadia subduction zone↗

USGS2025

The influence of postfire root strength decay on shallow landslide susceptibility in western Oregon

Severe wildfires can increase the potential for postfire landslides, partly due to the loss of vegetation and root reinforcement. This study investigates the multi-year dynamics of root strength following wildfire in coniferous forests of western Oregon and evaluates implications for postfire slope stability. Root tensile strength was measured through laboratory testing of 969 roots collected from 26 test pits over four postfire timeframes: unburned conditions, 4–12 months postfire (Cedar Creek, 2022), 24–35 months postfire (Holiday Farm, 2020), and 59–67 months postfire (Eagle Creek, 2017). Variables analyzed include root diameter, tensile thread strength, stiffness, progressive tensile strength with displacement, time-dependent strength and ductility, root area ratio, and cohesion. Results indicate a 50% reduction in root strength after wildfire, with the lowest values occurring around 4 years postfire. Projections indicate it could take 10–22 years following fire for root strength to recover to 70% and 90% of the prefire original root strength, respectively. This timeline indicates a multi-year window of vulnerability for shallow landslides that reaches a maximum approximately 4 years following fire. Brittle failure behavior was observed in burned root systems compared to unburned root systems, signaling a more abrupt loss of strength at yield. Simple slope stability analyses show that reduced root strength can lead to instability on more gentle slopes and under less saturation in comparison to unburned conditions. These findings highlight the critical role of root reinforcement in postfire slope stability and the long-term implications of wildfire disturbance on landslide susceptibility.

Oregon↗

USGS2025

System characterization report on the Environmental Mapping and Analysis Program (EnMAP)

This report addresses system characterization of the Environmental Mapping and Analysis Program hyperspectral sensor by the DLR (German Aerospace Center, ground segment project management), GFZ (Deutsches Geoforschungszentrum, science lead) and is part of a series of system characterization reports produced and delivered by the U.S. Geological Survey Earth Resources Observation and Science Cal/Val Center of Excellence. These reports present and detail the methodology and procedures for characterization; present technical and operational information about the EnMAP hyperspectral sensor; and provide a summary of test measurements, data retention practices, data analysis results, and conclusions. The Earth Resources Observation and Science Cal/Val Center of Excellence system characterization team completed data analyses to characterize the geometric (interior and exterior), and radiometric performances of the EnMAP hyperspectral sensor. Results of these analyses indicate that the Environmental Mapping and Analysis Program has a band-to-band geometric performance in the range of −0.135 to 0.15 pixel, geometric performance relative to the Operational Land Imager in the range of −27.716 meters (−0.92 pixel) to 32.892 meters (1.09 pixels) offset in comparison to Landsat 8 Operational Land Imager, offset of a radiometric comparison in the range of −0.012 to 0.020, slope of a radiometric comparison in the range of 0.947 to 1.031.

Open-File Report↗

USGS2024

Isotopic evaluation of the National Water Model reveals missing agricultural irrigation contributions to streamflow across the western United States

The National Water Model (NWM) provides critical analyses and projections of streamflow that support water management decisions. However, the NWM performs poorly in lower-elevation rivers of the western United States (US). The accuracy of the NWM depends on the fidelity of the model inputs and the representation and calibration of model processes and water sources. To evaluate the NWM performance in the western US, we compared observations of river water isotope ratios ( 18 O / "> 16 O and 2 H / "> 1 H expressed in δ notation) to NWM-flux-estimated (model) river reach isotope ratios. The modeled estimates were calculated from long-term (2000–2019) mean summer (June, July, and August) NWM hydrologic fluxes and gridded isotope ratios using a mass balance approach. The observational dataset comprised 4503 in-stream water isotope observations in 877 reaches across 5 basins. A simple regression between observed and modeled isotope ratios explained 57.9 % ( δ 18 O) and 67.1 % ( δ 2 H) of variance, although observations were 0.5 ‰ ( δ 18 O) and 4.8 ‰ ( δ 2 H) higher, on average, than mass balance estimates. The unexplained variance suggest that the NWM does not include all relevant water fluxes to rivers. To infer possible missing water fluxes, we evaluated patterns in observation–model differences using δ 18 O diff ( δ 18 O obs − δ 18 O mod ) and d diff ( δ 2 H diff - 8 ⋅ δ 18 O diff "> ). We detected evidence of evaporation in observations but not model estimates (negative d diff and positive δ 18 O diff ) at lower-elevation, higher-stream-order, arid sites. The catchment actual-evaporation-to-precipitation ratio, the fraction of streamflow estimated to be derived from agricultural irrigation, and whether a site was reservoir-affected were all significant predictors of d diff in a linear mixed-effects model, with up to 15.2 % of variance explained by fixed effects. This finding is supported by seasonal patterns, groundwater levels, and isotope ratios, and it suggests the importance of including irrigation return flows to rivers, especially in lower-elevation, higher-stream-order, arid rivers of the western US.

Hydrology and Earth Systems Science↗

USGS1986

Potential for leakage among principal aquifers in the Memphis area, Tennessee

The principal aquifers in the Memphis area consist primarily of sand or sand and gravel, and the confining beds consist of clay, silt, sand, and lignite. The Jackson Formation and upper part of the Claiborne Group serve as the confining bed separating the water table aquifers from the Memphis Sand; the Flour Island Formation separates the Memphis Sand from the Fort Pillow Sand. Differences in total hydraulic head among the principal aquifers in the Memphis urban area result in vertical hydraulic gradients which create a potential for inter-aquifer exchange of water. Throughout this area, the gradient is downward from the water table aquifers to the Memphis Sand. In the central part of the Memphis urban area, the vertical hydraulic gradient is upward from the Fort Pillow Sand to the Memphis Sand, and in the eastern and western parts, it is downward from the Memphis Sand to the Fort Pillow Sand. The vertical distribution of carbon-14 data for water from the fluvial deposits, Memphis Sand, and Fort Pillow Sand shows an increase in the relative age of the water with depth. The areal distribution of carbon-14 data for water from the upper part of the Memphis Sand indicates that relatively recent water has been brought into the major cone of depression in the potentiometric surface of the Memphis Sand, either by horizontal movement or from downward vertical leakage. The normal, near-surface geothermal gradient in the Memphis area was determined to be 0.6 C/100 ft. Deviations from the normal geothermal gradient, in areas affected by intense pumping from the Memphis Sand, indicate that downward vertical leakage occurs from the water table aquifers through the Jackson-upper Claiborne confining bed to the Memphis Sand. The velocity of downward vertical leakage of water from the Memphis Sand through the Flour Island confining bed to the Fort Pillow Sand was determined to be 0.0066 ft/day by analysis of borehole temperature data from an observation well in the northeastern part of the Memphis area. From this velocity and the head difference between the Memphis Sand and the Fort Pillow Sand at this locality, the hydraulic conductivity of the Flour Island confining bed was determined to be 0.00114 ft/day. (Lantz-PTT)

Tennessee↗

USGS2026

Groundwater spatial variability within an atoll island: Assessing shallow aquifer heterogeneity with geophysical and physicochemical measurements

This study examines the spatial variability of shallow groundwater on Dhigelaabadhoo Island using electromagnetic induction surveys, groundwater monitoring, and sediment analyses. The research reveals how variations in island morphology—such as differences in elevation, reef flat width, and sediment composition—affect the spatial distribution of groundwater lenses and the overall aquifer dynamics. Saltwater intrusion is especially pronounced in low elevated areas, with narrow reef flat plate and areas where higher hydraulic conductivity—driven by the presence of coarser sediments—is observed, whereas regions characterized by finer sediments, higher elevation, and wider reef flat plates tend to support more symmetric and less saline groundwater lenses. The geophysical investigations reveal that tidal oscillations alter groundwater movement by markedly changing water levels and conductivity, thereby underscoring the critical need to account for temporal dynamics in atoll coastal aquifer systems and the importance of integrating tidal dynamics into the aquifer zone. The findings highlight the significant role of intrinsic morphological and external hydrodynamic factors in shaping groundwater distribution on atoll islands, offering critical insights for sustainable freshwater resource management.

Dhigelaabadhoo Island↗

USGS1996

Analysis of nutrients in the surface waters of the Georgia–Florida Coastal Plain study unit, 1970–91

During the early phase of the Georgia-Florida National Water Quality Assessment study, existing information on nutrients was compiled and analyzed in order to evaluate the nutrient concentrations within the 61,545 square mile study unit. Evaluation of the nutrient concentrations collected at surface-water sites between October 1, 1970, and September 30, 1991, utilized the environmental characteristics of land resource provinces, land use, and nonpoint and point-source discharges within the study unit. Long-term trends were investigated to determine the temporal distribution of nutrient concentrations. In order to determine a level of concern for nutrient concentrations, the U.S. Environmental Protection Agency (USEPA) guidelines were used: (1) for nitrate concentrations, the maximum contaminant level in public-drinking water supplies (10 mg/L); (2) for ammonia concentrations, the chronic exposure of aquatic organisms to un-ionized ammonia (2.1 mg/L); (3) for total-phosphorus concentrations, the recommended concentration in flowing water to discourage excessive growth of aquatic plants (0.1 mg/L); and (4) for kjeldahl concentrations, however, no guidelines were available. For sites within the 10 major river basins, median nutrient concentrations were enerally below USEPA guidelines, except for total-phosphorus concentrations where 45 percent of the medians exceeded the guideline. The only median ammonia concentration that exceeded the guideline occurred at the Swift Creek site (3.4 mg/L), in the Suwannee River basin, perhaps due to wastewater discharges. For all sites within the Withlacoochee, Aucilla, and St. Marys River basins, median concentrations of nitrate, ammonia, and total phosphorus were below the USEPA guidelines. Nutrient data at each monitoring site within each major basin were aggregated for comparisons of median nutrient concentrations among major basins. The Ochlockonee and Hillsborough River basins had the highest median nutrient concentrations, the Aucilla River basin had the lowest. Median concentrations of nitrate and ammonia among all major basins were below USEPA guidelines. The median total-phosphorus concentrations for the following river basins exceeded the USEPA guideline: Hillsborough, St. Johns, Suwannee, Ochlockonee, Satilla, Altamaha, and Ogeechee. Although nutrient concentrations within the study unit were low, long-term increasing trends were found in all four nutrients. All 18 study-unit wide nitrate trends had increasing slopes ranging from less than 0.01 to 0.07 (mg/L)/yr. The range in slope for the 13 ammonia trends was -0.03 to 0.01 (mg/L)/yr with 6 increasing trends in the northern part of the study unit. Of the 17 total-phosphorus trends found in the study unit, 10 were found at sites where the median concentration exceeded the USEPA guideline. At these 10 sites, 4 sites had increasing trends with slopes ranging from less than 0.01 to 0.07 (mg/L)/yr, 5 sites had decreasing trends with slopes ranging from -0.01 to -0.24 (mg/L)/yr, and one site showed a seasonal concentration trend. Median nutrient concentrations were significantly different among the four land resource provinces: Southern Piedmont, Southern Coastal Plain, Coastal Flatwoods, and Central Florida Ridge. As a result, nutrient concentrations among basins with similar nutrient inputs but located within different land resource provinces are not expected to be the same due to differences in the combination of factors such as soil permeability, runoff rates, and stream channel slopes. This concept is an important consideration in designing a surface-water quality network within the study area. For the most part, the Coastal Flatwoods showed the lowest median nutrient concentrations and the Southern Coastal Plain had the highest median nutrient concentrations. Lower median nitrate concentrations in surface-water basins were associated with the forest/wetland land-use category and higher median concentrations of nitrate and ammonia with the urban category when land-use percentages were classified into four land-use categories (agriculture, forest/wetland, mixed, and urban). These results were reasonable based on expected high nutrient inputs from urban areas and low inputs from forested and wetland areas. However, the lack of association between high nutrient concentrations and the agricultural land-use category was not expected since high nutrient inputs are generally needed for agriculture production.

Florida, Georgia↗

USGS2025

Groundwater response to managed aquifer recharge at the Southeast Houghton Artificial Recharge Project in Tucson, Arizona

Managed aquifer recharge is a widespread practice for storing water in the subsurface as groundwater. At a managed aquifer recharge facility in southern Arizona, groundwater-level and repeat microgravity data were collected to monitor aquifer response. These data were used to inform parameter identification for an unsaturated-zone flow model used to simulate the recharge process. The facility, the Southeast Houghton Artificial Recharge Project (SHARP), consists of 3 surface basins (about 27,600 square meters [6.8 acres] total surface area) where recycled water is distributed in recharge cycles lasting several months, with dry periods in between. During the study period, December 2020–December 2022, Tucson Water (the City of Tucson’s water utility) reported 6.56×10 6 cubic meters of water (5,320 acre-feet) recharged. Monitoring included groundwater-level observations at 3 monitoring wells and repeat microgravity measurements at as many as 22 locations (some stations were destroyed between surveys). Six gravity surveys were carried out using absolute- and relative-gravity meters. Large gravity increases, more than 250 microgals, were observed during the first repeat survey, 3.5 months after the start of recharge, but only in the immediate vicinity of the recharge basins. Data show that water moved downward to the water table, and storage changes in the unsaturated zone away from the facility were likely minimal. Gravity decreased at stations more than 1 kilometer from the facility, consistent with regional groundwater-level changes. Groundwater-level increases in wells adjacent to the recharge basins began 2 months after the second repeat gravity survey, and 5.5 months after recharge began. Unsaturated-zone flow modeling was carried out using software that simulates water movement and parameter estimation. Model calibration was carried out by minimizing an objective function calculated from the differences between simulated and observed groundwater levels, and between simulated and observed repeat microgravity data. Including repeat microgravity data in the objective function reduced the uncertainty in estimated parameter values for saturated hydraulic conductivity and saturated water content. Modeling indicated that the unsaturated zone between the recharge basins and the water table does not become saturated even after 685 days of simulated infiltration. This gradual wetting may account for increasing infiltration rates over time, as hydraulic conductivity increases with increasing water content. Unsaturated-zone water content decreased rapidly between recharge cycles. Model-simulated groundwater mounding extended about 1 kilometer from the center of SHARP after the 685-day period following the onset of recharge.

Arizona↗

USGS2024

The addition of 144Nd atomic mass to routine ICP-MS analysis as a Quick Screening Tool for Approximating Rare Earth Elements (Q-STAR) in natural waters

Rare earth elements (REEs) are a class of critical minerals, all of which can have supply chain vulnerability that impacts economic security. These elements are widely measured in environmental matrices via inductively coupled plasma mass spectrometry (ICP-MS); however, successful quantification can require time-consuming, sample-specific optimization. While a sample-by-sample approach is appropriate for targeted quantification studies, this approach is not suitable for mineral exploration efforts where rapidly screening thousands of samples for the presence of REEs is desired. Here, we demonstrated the use of a Quick Screening Tool for Approximating REEs (Q-STAR) to detect REEs in surface water and groundwater matrices, collected as part of existing environmental studies. A mass-to-charge ratio of 144 ( m / z = 144) was added to an ICP-MS method to screen for REEs in filtered water samples submitted for metals analyses to the U.S. Geological Survey (USGS) National Water Quality Laboratory. We detected the presence of REEs above a reference threshold of 1200 counts per second in 18 % of pre-selected 6626 samples. Using this screened dataset, we mapped estimated dissolved REE concentrations across the United States in relation to ecoregions and underlying geology. Data are constrained to where sample collection took place but nevertheless show estimated aqueous dissolved REE concentrations on a geographic scale that has not yet been studied. To validate Q-STAR, REEs were measured in a USGS standard reference sample, a subset of 88 archived filtered water samples, and in fresh filtered surface water samples. Our targeted analyses demonstrated a strong linear relationship between Q-STAR predicted and measured values in all archived samples for Nd (r 2 = 0.94), and light REEs (LREEs) such as lanthanum (La) (r 2 = 0.93), praseodymium (Pr) (r 2 = 0.94) and samarium (Sm) (r 2 = 0.94). Using Q-STAR screen values, nine field sites were identified and surface water samples recollected to confirm the continued presence of Nd and LREEs. Q-STAR can be used to screen an unlimited number of water samples for the presence of REEs prior to time-intensive and costly quantitative analyses and to generate large REE datasets for further investigation.

Journal of Geochemical Exploration↗

USGS2024

Simulated mean monthly groundwater-transported nitrogen loads in watersheds on the north shore of Long Island Sound, 1993–2022

Elevated nitrogen loads are pervasive in the Long Island Sound, an estuary that receives freshwater and nutrients from both surface-water and groundwater discharge. Surface-water nitrogen loads to the Long Island Sound are relatively well characterized, but less is known about groundwater-transported nitrogen loads. Prior work on the northern shore of Long Island Sound (Connecticut and areas of New York and Rhode Island) suggested that groundwater travel times are relatively short (median less than 2 years) and that decade-long nutrient legacies are not widespread. Because the travel times are short, groundwater flow and nutrient loads likely vary substantially between months. In the current study, the U.S. Geological Survey, in cooperation with the U.S. Environmental Protection Agency’s Long Island Sound Study and the Connecticut Department of Energy and Environmental Protection, developed a set of models to better characterize spatial and temporal patterns of groundwater-transported nitrogen loading from atmospheric deposition, septic systems, and fertilizers within the study area. The models provide an estimate, with uncertainty, of groundwater-transported nitrogen loads in the study area, filling a key gap in the nitrogen budget for Long Island Sound. The models also highlight the spatial and temporal variation in nitrogen loading throughout the study area. The modeling workflow involved four models. (1) A soil-water-balance model was developed by using the Soil-Water-Balance software to simulate groundwater recharge across the study area for water years 2005 through 2022. The simulated mean monthly recharge from the soil-water-balance model was used as input into a groundwater-flow model. (2) The groundwater-flow model was developed by using the MODFLOW 6 software and data for water years 1993 through 2022 and simulates average monthly hydrologic conditions. The groundwater-flow model was calibrated by using the Iterative Ensemble Smoother method within the PEST++ software. The Iterative Ensemble Smoother method generates an ensemble of sets of parameter values, with each set producing reasonable simulated hydrologic parameter values. (3) An ensemble of MODPATH particle-tracking simulations were run to generate particle flow paths and travel times, with each simulation using a different set of the flow model parameters. (4) A nitrogen load model uses the MODPATH simulation outputs to track nitrogen from the land surface through multiple attenuation zones until it discharges into fresh or saline surface water. As with the groundwater-flow model, the nitrogen model simulated average monthly groundwater-transported nitrogen loads for water years 1993 through 2022. One novel aspect of the nitrogen load model is that the nitrogen attenuation parameters were calibrated to observed nitrogen loads. Across the ensemble of simulated nitrogen loads, the median study-area-wide monthly simulated nitrogen loads from the aquifer to Long Island Sound throughout the year ranged from 900 to 18,600 kilograms of nitrogen per day, with a median load of 5,100 kilograms of nitrogen per day. The simulated loads were based on average monthly conditions for water years 1993 through 2022. Loads were highest during the winter and early spring and lowest during the late summer. However, simulated travel times for groundwater and nitrogen loads discharged to Long Island Sound during summer were longer than travel times for groundwater and loads discharged during the winter, indicating that, on average, groundwater discharged during summer traveled along different, and longer, flow paths, than groundwater discharged during winter. This indicates that summer loads would respond more slowly to changes in nitrogen inputs at the water table than winter loads. Over the entire study area, approximately 15 percent of the simulated load is from atmospheric deposition sources, 30 to 40 percent is from fertilizer, and 50 to 60 percent is from septic systems. The final analysis of the study involved simulating the change in groundwater-transported nitrogen load in response to upgrading septic systems or reducing fertilizing inputs to areas of turf grass. Both management interventions reduced the groundwater-transported nitrogen load, and reductions were greater in areas with greater loads from septic systems or turf-grass fertilizers. The delay between management actions and substantial reductions in groundwater-transported nitrogen loads varied seasonally; loads during the late summer months remained elevated longer than the winter loads.

Connecticut, Rhode Island↗

USGS2025

Using gridded seismicity to forecast the long-term spatial distribution of earthquakes for the 2025 Puerto Rico and U.S. Virgin Islands National Seismic Hazard Model

Gridded (or background) seismicity models are a critical component of probabilistic seismic hazard assessments, accounting for off‐fault and smaller‐magnitude earthquakes. They are typically developed by declustering and spatially smoothing an earthquake catalog to estimate a long‐term seismicity rate that can be used to forecast future earthquakes. Here, we present new gridded seismicity models for use in the 2025 National Seismic Hazard Model (NSHM) for Puerto Rico and the U.S. Virgin Islands (PRVI). The previous PRVI NSHM was released in 2003, and our new models incorporate updates to both data and methodology. We utilize an updated earthquake catalog based on improved Puerto Rico Seismic Network data with newly characterized completeness epochs. The catalog is divided into crustal, subduction interface, and intraslab seismicity using new methods and Slab2 subduction zone geometries. To forecast the long‐term spatial distribution of earthquakes, we use an updated methodology developed for the 2023 U.S. 50‐state NSHM, considering three declustering methods and two spatial smoothing methods based on 2D Gaussian kernels. To adapt it for the complex seismotectonics of the region, we also adopt probabilistic methods to account for events with unknown depths and uncertainties in tectonic classification, and develop a new method for spatial scaling to counteract the effects of spatial variability in network coverage while maintaining the use of smaller events. Finally, we test the performance of these spatial models in forecasting the location of M w ≥ 5earthquakes in the region. Our updated methodology improves the representation of epistemic uncertainty relative to the 2003 model, and our results demonstrate the effectiveness of the new measures we have introduced to address heterogeneities in network detection and systematically evaluate forecast performance.

Puerto Rico, U.S. Virgin Islands↗

USGS2025

ShakeAlert® version 3: Expected performance in large earthquakes

The ShakeAlert earthquake early warning (EEW) system partners along with U.S. Geological Survey (USGS) licensed operators deliver EEW alerts to the public and trigger automated systems when a significant earthquake is expected to impact California, Oregon, or Washington. ShakeAlert’s primary goal is to provide usable warning times before the arrival of damaging shaking. EEW is most likely to achieve this goal in large‐magnitude earthquakes. In recent years, ShakeAlert has gone through a series of upgrades to its underlying scientific algorithms aimed at improved performance during large earthquakes. Version 3 of this software recently went live in the production system and includes improvements to all algorithms. The main seismic algorithms that detect an earthquake and characterize its location, magnitude, and fault rupture orientation are faster than older versions. Other key changes include: using real‐time geodetic data to characterize the magnitude growth in large earthquakes; the introduction of an alert pause procedure to compromise between speed near the epicenter and improved accuracy at larger distances; and the inclusion of a nonergodic site‐response model in the ground‐motion predictions. ShakeAlert has achieved its primary goal of usable warning times before strong shaking at some locations in real‐time operations in recent M 6 earthquakes. Using offline tests, we demonstrate usable warning times are possible for many sites with peak shaking values of modified Mercalli intensity (MMI) 7–8 in M 7+ earthquakes and also for many MMI 8–9 sites in M 8+ earthquakes. ShakeAlert partners use a variety of MMI and magnitude thresholds in deciding when to alert their users within bounds set by the USGS. Our study shows that there is room to raise the magnitude thresholds up to about M 5.5 without adversely affecting performance in large earthquakes. The ground‐motion criteria are more complex owing to a significant drop‐off in warning times between the MMI 4 and 5 levels of predicted shaking. However, widely used ShakeAlert products, such as the MMI 3 and 4 contour products, can provide sufficiently long warning times before strong shaking in moderate‐to‐great earthquakes to enable a range of protective actions.

Bulletin of the Seismological Society of America↗

USGS2024

Geologic input databases for the 2025 Puerto Rico – U.S. Virgin Islands National Seismic Hazard Model update: Crustal faults component

The last National Seismic Hazard Model (NSHM) for Puerto Rico and the U.S. Virgin Islands (PRVI) was published in 2003. In advance of the 2025 PRVI NSHM update, we created three geologic input databases to summarize new onshore and offshore fault source information in the northern Caribbean region between 62°–70° W and 16°–21° N. These databases, of fault sections, fault‐zone polygons, and geologic estimates of fault activity (fault‐slip rate and earthquake recurrence intervals) at specific sites, document updates to fault parameters used in prior seismic hazard models in PRVI. Fault sources were reviewed from published studies since 2003, which document substantial changes to the understanding of fault location, geometry, or activity. New fault section sources were added for features that meet the criteria of (1) length ≥7 km, (2) unequivocal evidence of recurrent tectonic Quaternary activity, and (3) documentation that is publicly available in a peer‐reviewed source. In addition, we revised several broad areal sources, such as the Mona and Anegada extensional zones. The 2003 model included three fault sections and two fault‐zone polygons (areal sources). These databases include 35 fault sections, 6 fault‐zone polygons, and 51 earthquake geology sites. To characterize fault activity rates, slip‐rate bins were assigned based on landscape expression and paleoseismic trench observations for faults without published slip‐rate sites. Additional fault sources were evaluated but not included in these databases due to a lack of published information about fault location, geometry, or recurrent Quaternary activity. The PRVI NSHM 2025 geologic input databases describe crustal faulting; the geometries and coupling of Puerto Rico subduction zone and Muertos Trough models are considered in a separate database. Updates to the fault sections, fault‐zone polygons, and earthquake geology databases can help inform the location and recurrence rate of damaging earthquakes in the PRVI NSHM implementation.

Puerto Rico, U.S. Virgin Islands↗

USGS2026

Synthesizing a twelve-year sediment trap time series of planktic foraminiferal flux in the Gulf of America (Mexico)

Sediment trap time series provide powerful frameworks for testing hypotheses about planktic foraminiferal assemblage composition, seasonality, and geochemical responses to environmental variability, all of which are central to improving paleoceanographic reconstructions. We present high resolution foraminiferal assemblage data from a long-running sediment trap (2008–2020) in the northern Gulf of America (Mexico). This study summarizes the species composition, seasonality, and size distribution of the fifteen most abundant species of planktic foraminifera, which account for 98% of total flux. Foraminiferal flux peaks in winter and reaches a minimum in summer, following the seasonal pattern of primary production in the northern Gulf. Winter assemblages are dominated by non-spinose taxa, whereas spinose taxa prevail during summer. Across nearly all species, average monthly test size covaries with temperature, independent of seasonal flux trends. Notably, Trilobatus sacculifer and Neogloboquadrina dutertrei show a significant decline in relative abundance and flux during 2017–2020, nearly disappearing from the assemblage.

Journal of Foraminiferal Research↗

USGS1999

Water-quality assessment of south-central Texas — Descriptions and comparisons of nutrients, pesticides, and volatile organic compounds at three intensive fixed sites, 1996-98

Water-quality samples were collected during April 1996-April 1998 at three intensive fixed sites in the San Antonio region of the South-Central Texas study unit as part of the U.S. Geological Survey National Water-Quality Assessment Program. The sampling strategy for the intensive fixed-site assessment is centered on obtaining information about the occurrence and seasonal patterns of selected constituents including nutrients, pesticides, and volatile organic compounds. The three sites selected to determine the effects of agriculture and urbanization on surface-water quality in the study unit are Medina River at LaCoste (agriculture indicator site), Salado Creek (lower station) at San Antonio (urban indicator site), and San Antonio River near Elmendorf (integrator site). Concentrations of two nutrients, dissolved nitrite plus nitrate nitrogen and total phosphorus, were largest at the integrator site, which is downstream of municipal wastewater treatment plants. Nitrite plus nitrate nitrogen concentrations at this site often exceeded the U.S. Environmental Protection Agency (EPA) maximum contaminant level (MCL) for drinking water. All total phosphorus concentrations at the site exceeded the EPA recommended maximum concentration for streams not discharging directly into reservoirs. Nitrite plus nitrate nitrogen concentrations at the integrator site tended to be smaller, and total phosphorus concentrations at the urban site tended to be larger in samples collected during stormflow than during base flow. The most detections and largest concentrations of three pesticides (atrazine, diazinon, and prometon) were in samples collected at the urban site. Some pesticide concentrations at the agriculture site showed a seasonal pattern of increasing concentrations during spring, the peak application season. Four pesticides (atrazine, deethylatrazine, diazinon, and prometon) were detected in at least 38 percent of samples collected at all three sites. The concentrations of all detected pesticides that have an MCL were less than the MCL at the three sites. More volatile organic compounds (VOC) were detected at the urban indicator site than at the agriculture indicator site, mostly likely because more sources are located in urbanized areas. The most VOCs detected and the largest concentrations of two VOCs (chloroform and tetrahydrofuran) were in samples from the integrator site. More VOCs were detected in samples collected at the integrator site during stormflow than during base flow. The concentrations of all detected VOCs that have an MCL were less than the MCL at the three sites.

Texas↗

USGS2025

Geologic map of the Greater Antilles and Virgin Islands

Introduction The geologic map of the Greater Antilles and Virgin Islands is a compilation of information from the literature, integrated to provide a seamless geologic map of the region. This map was prepared to serve as a base map for a mineral resource assessment of the region. Several small-scale regional geologic maps of the region have been prepared in the past. This report supersedes an earlier version of the geologic map of the Greater Antilles and the Virgin Islands that was released as U.S. Geological Survey (USGS) Open-File Report 2019–1036. For this report, the regional geologic overview shown on sheet 1 covers Cuba; the island of Hispaniola, which includes Haiti and Dominican Republic; Jamaica; the Cayman Islands; Puerto Rico; and the U.S. and British Virgin Islands. Sheet 2 shows the geology of Cuba and Cayman Islands, sheet 3 the geology of Jamaica, sheet 4 the geology of Hispaniola, and sheet 5 the geology of Puerto Rico and Virgin Islands. Accompanying the maps are three tables: table 1 lists the map units (in alphabetical order by map-unit label), their ages, and the countries or territories in which they can be found. These are listed in alphabetical order for ease in locating unit names from the symbols on the maps. Table 2 is a list of sources for the geologic map compilation of Puerto Rico. Table 3 shows formations in the Devil’s Race Course Group of Jamaica.

Greater Antilles, Virgin Islands↗