SEARCH · USGS Science

Results for “Deep Sea Research Part II: Topical Studies in Oceanography”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

1,615 records · Page 49Linked to original sources

USGS2026

Rare earth element potential in coal and coal ash in the U.S. Gulf Coast

United States heavy reliance on imports of critical minerals (CMs), including rare earth elements (REEs), underscores the importance of development of domestic sources. The study objective was to quantify CM and REE concentrations in coal and coal ash in the US Gulf Coast region. CM and REE concentrations were measured for 118 samples from outcrops and 14 mines in the Gulf Coast. Results show that total REE + Yttrium (REY) concentrations (dry coal basis) are comparable to those of the upper continental crust (UCC) with localized hot spots, such as the Texas Gibbons Creek mine (REY ≤ ~ 2860 ppm). When normalized to UCC REY concentration (169 ppm, dry coal basis), REY to UCC ratios for Gulf Coast coal samples range from 0.1 to 17 (median ratio 0.6). REE extractability from lignites is high (median: 63%–93%) using environmentally benign weak acid. In addition to raw coal, coal ash from power plants could also serve as an REE source with a median ratio of REY in ash relative to coal of 4; however, extractability from coal ash is generally much lower (≤ 5% using the same weak acid as in coal). The median basket price for extracted REY as oxides from coal, assuming 70% extractability, is $3.2 per tonne of coal and $186 billion based on 58 billion metric tonnes of dry coal in the Gulf Coast. REEs important for magnets (Pr + Nd + Tb + Dy) account for ~ 80% of the total value. The corresponding median basket price for extracted REY as oxides from coal ash, assuming ~ 30% extractability, is ~$4.4 per tonne of ash and $1.2 billion based on 258 million tonnes of ash. REE production from coal would likely require co-products, such as activated carbon or humic acids, to attain economic viability. Production of REEs from coal ash could offset remediation costs related to potential water contamination. This reconnaissance study shows the potential for REE production from coal and coal ash in the Gulf Coast; however, carbon coproducts and/or societal benefits would likely be required for socioeconomic viability.

Alabama, Florida, Louisiana, Mississippi, Texas↗

USGS2026

Stream sediment sources in Medicine Creek, northern Missouri and southern Iowa

This report presents the results of a cooperative study by the U.S. Geological Survey and Missouri Department of Natural Resources to quantify sediment transport source contributions in the Medicine Creek drainage basin. Understanding relative source contributions provides valuable information for selecting the conservation practices that may be most effective in reducing sediment and sediment-associated nutrient transport in the Medicine Creek drainage basin and similar areas of the Lower Grand River drainage basin. Sediment samples were collected from potential contributing areas (source samples) and from fluvial-transported samples (target samples). Source sample types included streambanks, row crop fields, and a combined pastures and forests category. Samples were analyzed for particle size and quantity of carbon, nitrogen, stable isotopes of carbon and nitrogen, and 49 mineral elements as potential tracers. Results for the carbon stable isotope ratio of carbon-13/carbon-12 (δ 13 C) and concentrations of total carbon, total nitrogen, calcium, potassium, and copper were selected by discriminant function analysis as the best combination of multiple tracers to differentiate each source type. The discriminant function analysis poorly differentiated pastures and forests, so these source types were combined. The sources defined by the discriminant function analysis were then used in an unmixing model to apportion sources for each target sample. In the study area, transported sediment was predominantly bank sediment, with an overall average of 86.9 percent of suspended-sediment samples and depositional streambed samples attributed to bank material. Suspended-sediment samples from the mainstem of Medicine Creek were dominated by bank sediments (average of 95.8 percent), and depositional streambed samples from throughout the drainage basin had more variable source contributions with an average of 71.1 percent attributed to bank material. The relative importance of upland sources (row crop fields and the combined pastures and forests category) varied seasonally and with streamflow but was not related to land use or drainage basin size. Relative contributions from upland sources were greater in the summer through winter rather than spring and during lower streamflow, though this may be driven by the seasonality of streamflow. These results indicate management practices that reduce bank erosion could be effective strategies for managing the dominant source of sediment and sediment-associated phosphorus.

Iowa, Missouri↗

USGS2026

Inference of pattern-based geological CO2 sequestration and oil recovery potential in a commingled main pay and residual oil zone CO2-EOR flood

Several detailed studies have shown that residual oil zones (ROZs) can present significant resources for additional hydrocarbon recovery as well as subsurface carbon dioxide (CO 2 ) sequestration via enhanced oil recovery by injecting CO 2 (CO 2 -EOR). Field development strategies included new wells drilled dedicated to main pay zones (MPZ) and ROZs, or existing wells in MPZs deepened to ROZs for commingled injection-production using different well patterns. The latter presented a challenge when discerning the injection and production from each of the zones, and for subsequent quantification of CO 2 sequestration and EOR potential from different patterns and from the field. In this paper, an innovative method for analyzing commingled injections and productions from MPZs and ROZs, with application to pattern-based data from four staggered line drive patterns in Wasson Field's Denver Unit, Texas, USA, was developed. Decline curve and ratio-trend methods were used as means of history-matching and forecasting. Cumulative production-time and cumulative production-rate data for oil, gas, and water, as well as water-oil ratio (WOR) and gas-oil ratio (GOR), were analyzed along with injection data for time intervals covering major injection events in MPZ, or MPZ and ROZ combined. A combined analysis enabled inference of allocation of fluids into different zones during WAG (water alternating gas) injection and thereby estimation of CO 2 storage, utilization, and retention in different zones as a function of total injection. Results show that ROZs generally present higher CO 2 sequestration potential compared to MPZs, and a comparable incremental oil recovery factor of ∼20%, on average. Results based on ratio analysis further show that while the WOR trend of the pattern production is mostly dominated and controlled by ROZ, GOR is controlled by both intervals. Although the method relying on decline curves and the approach used in zonal fluid allocations are subject to their limitations, this study presents a practical and innovative well-pattern-based method to infer and forecast CO 2 sequestration and oil recovery quantities and fluid ratios from MPZs and ROZs in commingled operations and highlight the added potential offered by ROZs.

Texas↗

USGS1990

Large springs in the Valley and Ridge Province in Tennessee

Approximately 2,700 miscellaneous discharge measurements for 171 large springs in 28 counties of East Tennessee, predominantly within the Valley and Ridge physiographic province, were analyzed statistically and results tabulated to summarize data useful to the Appalachian Valleys-Piedmont Regional Aquifer System Analysis study. The number of measurements at each spring ranged from 1 to 65. Information from each spring includes station numbers, latitude, longitude, spring name and where data are sufficient, an estimate of the mean discharge and the discharge exceeded by 75%, 50%, and 25% of the miscellaneous measurements. Data are referenced to locations on a 1:1,000 ,000-scale map. The highest mean spring discharge was 32.2 cu ft/sec (14,5000 gallons/min).

Tennessee↗

USGS2025

Solution-collapse breccia pipe uranium deposits of the southern Colorado Plateau, northwestern Arizona, USA

Some of the highest-grade uranium deposits in the United States occur in breccia pipes that formed by solution and collapse of sedimentary strata, which occur in the southern portion of the Colorado Plateau in northwestern Arizona. The host breccia pipes are up to 1200 m in vertical extent, average about 90 m in diameter, and can cross-cut strata from their base in the Mississippian Redwall Limestone to as stratigraphically high on some plateaus as the Triassic Chinle Formation. These uranium-base metal deposits are up to 600 m thick and formed within the breccia pipes where they transect the Permian Coconino Sandstone, Hermit Formation, and the Esplanade Sandstone. Of the hundreds of breccia pipes identified across this region, only a small percentage are known to contain mineralization. The main uranium ore mineral is uraninite that is intergrown with at least 20 base-metal sulfide minerals, which contribute Fe, Cu, Co, As, Pb, Zn, Ni, and Ag to the deposits. This study considered regional stratigraphy, sulfur isotope systematics, mineralogy, in situ dating, and compilation and analysis of previous work on the deposits. A comprehensive deposit model has not been published for these deposits. This analysis identified new additions to update the deposit model for these unusual, possibly unique deposits. Proposed modifications to the model include: (1) the source, mechanisms, timing of the base-metal sulfide mineral assemblages, and (2) the source, mechanism, and timing of the uranium mineralization. Sulfide and uranium deposition are shown to be separate mineralization events. The study proposes the possible role of gypsum as a source of sulfur for the sulfide minerals in the deposits. Groundwaters carrying uranium encountered the preexisting sulfides in breccia pipes, reducing the uranyl ions, and precipitating U oxide (as uraninite). Analysis of the regional stratigraphy recognized that numerous beds of gypsum are in the strata that lie only tens of meters above the breccia pipe deposits. In the breccia pipe region, if these stratigraphic units (Toroweap and Kaibab Formations) do not contain gypsum layers then the underlying pipes are not mineralized; where these Permian gypsum layers do occur, breccia pipes can host mineralization. This new understanding should be useful in identifying the prospective region for mineralized pipes.

Arizona↗

USGS2026

Simulated ground motion dataset in the Azores Plateau, Portugal, on rock and soil sites

Building on a previously developed bedrock dataset, this study extends the Azores Plateau ground motion simulations to include soil-amplified records and introduces a comprehensive validation framework. Soil amplification is modeled using one-dimensional soil profiles. A stochastic source-based approach is employed to generate the dataset, incorporating randomization of input-model parameters to account for the aleatory uncertainty in seismic activity. The accuracy of the dataset is verified through a comprehensive validation framework, showing that the randomization effectively captures variance and inter-period correlation observed in records. This work provides a robust dataset for advancing seismic hazard and risk assessment in the Azores Plateau.

central and eastern Azores islands↗

USGS2024

Analysis of factors affecting plume remediation in a sole-source aquifer system, southeastern Nassau County, New York

Several plumes of dissolved, chlorinated solvents, including trichloroethylene, have been identified in a sole-source aquifer near the former Northrop Grumman Bethpage Facility and Naval Weapons Industrial Reserve Plant sites in southeastern Nassau County, New York. Past investigations have documented that the groundwater contamination originated from this industrial area and now extends to the south, in the direction of groundwater flow. The intermixed plumes are commonly referred to as the “Navy Grumman groundwater plume.” Detailed groundwater-flow modeling was needed for the New York State Department of Environmental Conservation (NYSDEC) to evaluate design options necessary for the construction, operation, optimization, maintenance, and monitoring of a groundwater extraction and treatment cleanup plan selected in a December 2019 Amended Record of Decision by the NYSDEC to comprehensively address these plumes. Consequently, the NYSDEC began a cooperative study with the U.S. Geological Survey in 2020 to better understand the local hydrogeologic framework using two independent approaches to characterize aquifer heterogeneity and update an existing regional groundwater-flow model to provide transient boundary conditions for new inset groundwater-flow models of the plume area. We developed these detailed inset models for the two independent aquifer characterizations using history-matching techniques coupled with a novel approach to risk-based management optimization of the remedial design. We also used the updated regional model to assess this optimized groundwater extraction and treatment design for potential saltwater intrusion. The ensembles of parameters resulting from history matching provided a platform with which to evaluate capture by water-supply and remedial wells using particle-tracking techniques. Using the ensemble to select a risk stance, we performed multiobjective optimization to identify various configurations of remedial pumping that are consistent with external constraints and that favor potentially competing objectives. Multiple solutions provide tradeoffs that NYSDEC can consider. In general, pumping redistribution may help to prevent further contamination migration downgradient. These and other study results are intended to support decisions for the remedial design focused on the local area encompassing the full extent of the Navy Grumman groundwater plume.

New York↗

USGS2024

Framework for implementing damping scaling factors in U.S. Geological Survey National Seismic Hazard Models

Traditionally, probabilistic seismic hazard analysis (PSHA) has focused on calculating ground motion hazard curves for elastic, 5%-damped pseudo spectral accelerations, Sa(T,5%), which are used as the basis for engineering design parameters and targets for ground motion selection and modification. However, structures and geotechnical systems can exhibit a wide range of damping ratios both above and below the 5% level, depending on the construction material, structural system, nonstructural elements, or subsurface soil properties. When spectral parameters at such damping levels are required for certain applications, 5%-damped accelerations have traditionally been extracted from PSHA-based hazard curves and adjusted outside of the hazard integral using damping scaling factors (DSF) such as those from Newmark & Hall (1982). Recent advances in the development of more rigorous and comprehensive damping scaling models (e.g., Rezaeian et al., 2014; Rezaeian et al., 2021) have allowed for the modeling of means and standard deviations of DSFs as functions of earthquake source and path properties for crustal, intraslab, and subduction interface tectonic environments. These DSF models can be applied to ground motion model (GMM) estimates of Sa(T,5%) for a given earthquake rupture scenario to produce a corresponding mean and standard deviation Sa at a specified damping ratio β, Sa(T,β). In this study, the DSF models of Rezaeian et al. (2014) and Rezaeian et al. (2021) are implemented within the U.S. Geological Survey National Seismic Hazard Model (NSHM) PSHA framework to calculate probabilistic hazard curves for spectral accelerations at damping ratios from 0.5% to 30%. The DSF models are applied directly to the mean and standard deviation of Sa(T,5%) predictions from each GMM in the NSHM logic tree. Resulting hazard curves and uniform hazard and risk spectra for Sa(T,β) are presented for several geographic locations and compared with corresponding spectra estimated using current design practices by applying the same DSFs outside of the PSHA calculation. Key differences between the two methods for estimating Sa(T,β) are discussed, and potential strategies are presented for the implementation and usage of the hazard-consistent Sa(T,β) in building codes. Comparing the results to those from DSFs used in current design practices that are mainly based on Newmark & Hall (1982) is not explored in this study.

Conference Paper↗

USGS2026

Utilizing hydrophones to detect streambed mobilization in the Wild and Scenic reach of the Rio Chama

This paper describes a study that deployed underwater acoustic sensors (hydrophones) to detect streambed mobilization in the Wild and Scenic reach of the Rio Chama, New Mexico. Fine sediment accumulation in the gravel‑cobble bed affects brown trout spawning habitat, and understanding incipient motion thresholds is essential for planning effective environmental flushing flows released from El Vado Dam. Two hydrophone stations were operated during 2021–2022, capturing audio data during a high‑flow pulse in late 2021. Acoustic processing techniques, including spectral analysis and threshold‑based impact detection, were used to identify sediment‑generated noise associated with coarse sediment transport. Results indicate detectable sediment mobilization during the high‑flow pulse, demonstrating hydrophones’ potential as a passive monitoring tool for environmental flow planning and sediment‑management decision support.

Conference Paper↗

USGS2026

2025 USGS National Seismic Hazard Model for Puerto Rico and the U.S. Virgin Islands: Overview of model and hazard results

The U.S. Geological Survey recently updated the National Seismic Hazard Model (NSHM) for Puerto Rico and the U.S. Virgin Islands (PRVI). The first version of the PRVI NSHM was released in 2003, and therefore this 2025 update includes over 20 years of new geologic, geophysical, and engineering data, methods, and models. Updates follow similar efforts performed in the recent 2023 50-state NSHM. However, this is the first NSHM in which we: (1) apply an inversion methodology to subduction interface fault sources in the earthquake rupture forecast (ERF) model; (2) develop scaled backbone median ground-motion models and independent aleatory variability models that are applied in the ground-motion characterization (GMC) model; and (3) calculate epistemic uncertainty related to alternative scenarios in the ERF and GMC models for all grid points in the study region. Long-term time-independent mean hazard calculations were performed for peak ground acceleration and 5%-damped pseudospectral acceleration at 21 spectral periods from 0.01- to 10.0-s, for eight National Earthquake Hazards Reduction Program site conditions ranging from V S30 = 150 to 1500 m/s, and for 2%, 5%, and 10% in 50-year probabilities of exceedance (return periods of 2475, 975, and 475 years, respectively). Epistemic uncertainty, in the form of selected percentiles, is also provided for a suite of test sites and all grid points in the study region for limited periods, site conditions, and probabilities of exceedance. Selected results, including comparisons with the 2003 PRVI NSHM, are shown and discussed for selected periods, site conditions, and probabilities of exceedance. When comparing the 2025 PRVI NSHM with the 2003 PRVI NSHM, hazard is generally higher at shorter periods and lower at longer periods, as a result of updates in both ERF and GMC models. The 2025 PRVI NSHM is applicable for return periods greater than ∼475 or less than ∼10,000 years.

Puerto Rico, U.S. Virgin Islands↗

USGS2025

Stratigraphic notes—Volume 2, 2025

This is the second volume in the U.S. Geological Survey (USGS) series of reports on stratigraphy entitled “Stratigraphic Notes,” which consists of short papers that highlight stratigraphic studies, changes in stratigraphic nomenclature, and explanations of stratigraphic names and concepts used on published geologic maps. “Stratigraphic Notes” is a long-term (multiyear), multivolume publication containing articles that address updates or revisions to stratigraphic nomenclature (and whose content ultimately will be incorporated by National Geologic Map Database personnel into Geolex, https://ngmdb.usgs.gov/Geolex/ ). We welcome papers for the “Stratigraphic Notes” series from geoscientists of the USGS, of State Geological Surveys, and from academicians. Papers can be submitted for publication in “Stratigraphic Notes” by contacting the USGS Geologic Names Committee ( gnc@usgs.gov ). As new “Stratigraphic Notes” volumes are published, links to the volumes will be posted at https://doi.org/10.3133/pp1879 .

Professional Paper↗

USGS2026

Stratigraphic notes—Volume 3, 2026

This is the third volume in the U.S. Geological Survey (USGS) series of reports on stratigraphy entitled “Stratigraphic Notes,” which consists of short papers that highlight stratigraphic studies, changes in stratigraphic nomenclature, and explanations of stratigraphic names and concepts used on published geologic maps. “Stratigraphic Notes” is a long-term (multiyear), multivolume publication containing articles that address updates or revisions to stratigraphic nomenclature (and whose content ultimately will be incorporated by National Geologic Map Database personnel into Geolex, https://ngmdb.usgs.gov/Geolex/ ). We welcome papers for the “Stratigraphic Notes” series from geoscientists of the USGS, of State Geological Surveys, and from academicians. Papers can be submitted for publication in “Stratigraphic Notes” by contacting the USGS Geologic Names Committee ( gnc@usgs.gov ). As new “Stratigraphic Notes” volumes are published, links to the volumes will be posted at https://doi.org/10.3133/pp1879 .

Professional Paper↗

USGS2025

Confocal laser-scanning microscopy (CLSM)-based thermal maturity of Tasmanites and progress in standardization of fluorescence microspectrometry

Evaluation of thermal maturity in vitrinite-free or vitrinite-deficient sediments via fluorescence microspectrometry can provide relevant information related to petroleum exploration and thermal history assessment. However, variation in spectral fluorescence properties of alginite macerals with increasing thermal maturity is largely underexplored. Here, authors of this study have applied confocal laser-scanning microscopy (CLSM) in conjunction with fluorescence microspectrometry to a maturity series of marine Upper Devonian Tasmanites algae from the Ohio Shale (Huron Member) and a single sample from the Marcellus Formation of the Appalachian Basin. Spectral fluorescence properties of Tasmanites were evaluated in relation to orientation, measurement location, and the number of measurements per sample, and were compared to published literature. Emission spectra of Tasmanites from continuous wave laser excitation (405 nm) were acquired from sections perpendicular and parallel to bedding and at different positions within individual Tasmanites bodies. The results showed a progressive red-shift in emission maxima (λ max ) in a large sample sized maturity series ( N = 19), e.g., 493 to 578 nm for the perpendicular section at middle position. Further, blue-shifted apex and mineral-adjacent positions within sections perpendicular to bedding were observed, with the latter being reported here for the first time. While blue-shift at apex positions can be attributed to mechanical deformation-induced reorientation of photoselected fluorophores, the blue-shifted mineral-adjacent positions could result from strain loading and development of a plastic deformation region at the mineral contact zone with Tasmanites . A decrease in standard deviation with increasing number of measured emission maxima is well-observed, and 15 to 20 individual measurements per sample appears sufficient for low standard deviation and coefficient of variance. CLSM-derived thermal maturity parameters indicated that a moderate positive correlation of red/green quotient (Q 650/500 ; R 2 = 0.67) with solid bitumen reflectance (BR o in %) exists. For reproducible results, the determination of λ max and Q 650/500 should be conducted exclusively in the middle position at perpendicular and parallel sections of the polished whole-rock pellets, where the lowest standard deviation in measurement was observed. These results strengthen the suitability and relevance of the CLSM technique in thermal maturity studies of dispersed organic matter (DOM) and contribute to the standardization of fluorescence microspectrometry methods in organic petrology investigation.

Kentucky, Ohio, Virginia, West Virginia↗

USGS2024

Temporal, spatial, and chemical evolution of Quaternary high-silica rhyolites in the Mineral Mountains, Utah

The Mineral Mountains in southwestern Utah are a structurally controlled core complex at the confluence of the Colorado Plateau and the Basin and Range physiographic provinces. Aside from hosting Utah’s largest batholith, the Mineral Mountains host some of the State’s youngest high-silica rhyolites, which have been linked to a magma source that is presently being utilized as an enhanced geothermal system. The high-silica rhyolites take the form of effusive lavas and domes, and explosive products are rare. Previous K-Ar dating of these Pleistocene rhyolites placed eruptions between about 790 and 500 kilo-annum (ka) with contemporaneous basalts erupting in the valley to the east of the Mineral Mountains. Large uncertainties on these ages obscured the tempo of eruptions and thus hindered attempts to constrain the timescales of the petrogenetic processes that produced the rhyolites. In this study, we build on previous studies conducted in the 1970s and 1980s by using new geochronologic and geochemical data to investigate the temporal and spatial evolution of the youngest phase of volcanism in the Mineral Mountains. We identify two major eruptive periods, from approximately 850 to 750 ka and from approximately 590 to 480 ka. The older phase is characterized by the eruption of several basaltic lavas, two obsidian flows, and a series of coalescing porphyritic rhyolite domes. The younger phase included the eruption of six evolved high-silica rhyolite domes and one pyroclastic deposit, followed by the eruption of trachyandesite in the adjacent valley to the east. Whole-rock geochemical data indicate that the rhyolites can be divided into three chemical groups, with more evolved compositions erupting through time. The youngest rhyolites along the range crest have the lowest total iron and TiO 2 concentrations and the highest incompatible element concentrations, indicative of increasing differentiation with time and elevation. Improved precision on the eruption ages indicates a recurrence interval of approximately 20 thousand years. The eruptive flux for both periods of rhyolitic volcanism is about 0.01 cubic kilometers per thousand years, which is less than the magma resurgence flux rates for syn-caldera and post-caldera eruptions of the Valles Caldera and Yellowstone Caldera volcanic systems. Collectively, these geochemical, geochronological, and volumetric data may facilitate a better understanding of heat flux and the longevity of magmatic sources related to geothermal resources in similar small-volume, silicic systems.

Utah↗

USGS2024

Land-use interactions, Oil-Field infrastructure, and natural processes control hydrocarbon and arsenic concentrations in groundwater, Poso Creek Oil Field, California, USA

Like many hydrocarbon production areas in the U.S., the Poso Creek Oil Field in California includes and is adjacent to other land uses (agricultural and other developed lands) that affect the hydrology and geochemistry of the aquifer overlying and adjacent to oil development. We hypothesize that the distributions of hydrocarbons and arsenic in groundwater in such areas will be controlled by complex interactions between mixed land uses, oil-field infrastructure, and natural processes. In 2020–2021, samples of groundwater and surface water were collected and analyzed for a large suite of inorganic and organic chemicals and isotope and gas tracers to test this hypothesis. Those data are supplemented with ancillary data on historical geochemistry, hydrology, geology, and oil-field infrastructure. Hydrocarbons in groundwater (e.g., methane through pentane gases and benzene) are associated with natural processes (e.g., fault offsets or transition in sediment depositional environment) and oil-field infrastructure (e.g., fluid-migration pathways associated with uncemented annulus in oil wells or unlined pits). Arsenic concentrations >10 μg per liter (μg/L; maximum concentration 12.9 μg/L) are associated with natural processes in old, high-pH groundwater, and more recent recharge of water from natural and/or engineered recharge processes. Along the southwest margin of the oil field, pumping for drinking-water and irrigation supplies in combination with engineered groundwater recharge produce a depression in groundwater elevations where groundwater with elevated sulfate concentrations from agricultural areas and groundwater with hydrocarbons from the oil field mix to produce a zone of sulfate reduction that removes hydrocarbons and arsenic from groundwater but produces elevated sulfide (S 2- ) concentrations (maximum concentration 29 mg per liter, mg/L). In this study, multiple approaches were required to resolve the overlapping effects of land uses, oil-field infrastructure, and natural processes on the distributions of hydrocarbons and arsenic in groundwater. The combined use of geographic, historical, physical, chemical, isotopic, and other information to constrain processes could be a useful approach for studies in other hydrocarbon-production areas. This is particularly important where land uses affect aquifer hydrology to an extent that causes mixing of groundwaters with different chemical compositions.

California↗

USGS2024

The 3D Elevation Program—Supporting Ohio's economy

Introduction High-quality elevation data are proving to be a resource of great economic value in dealing with many important issues in Ohio. Current and accurate high-resolution elevation data support flood risk management, water quantity and quality assessment, precision farming, conservation planning, impervious-surface modeling, forest and other natural resources management, abandoned mine and geologic hazard assessment, karst mapping, and siting of wellhead pads for horizontal drilling. These data also support coastal zone management, traffic safety and preliminary engineering site-selection studies for transportation infrastructure, solar potential and other renewable energy planning, aviation safety, and identification of features of interest or concern such as archaeological sites and orphan oil and gas wells. Critical applications that meet the State’s management needs depend on light detection and ranging (lidar) data that provide a highly detailed three-dimensional (3D) model of the Earth’s surface and aboveground features.

Ohio↗

USGS2025

Map of topographic lineaments interpreted as recent surface ruptures along the Bennett Valley and Southern Maacama Fault Zones, Sonoma County, California

This study documents lidar-illuminated topographic lineaments interpreted as evidence of recent surface fault ruptures and surface ruptures related to distributed deformation along the Bennett Valley Fault Zone and the southernmost Maacama Fault Zone in the northern San Francisco Bay area (fig. 1, on map sheet). Together, these fault zones form a structural connection across a right stepover between the main Maacama Fault Zone and the Rodgers Creek Fault, overlapping principal strands of the San Andreas plate boundary system north of San Francisco Bay (figs. 1, 2, on map sheet) that accommodate about a quarter of the ~40 millimeters per year of regional dextral tectonic slip (Parsons and others, 2013). Although much of the Bennett Valley Fault Zone is seismically active (McLaughlin and others, 2012; Sowers and others, 2010), only the north end of the fault zone (the “Spring Valley strand,” indicated on southern map panel of map sheet and labeled “D” in figure 2, on map sheet) was previously known to have youthful geomorphic expression and to displace Holocene deposits (McLaughlin and others, 2008; Sowers and others, 2010; Sowers and others, 2016). Holocene activity along the length of the Bennett Valley Fault Zone and southernmost Maacama Fault Zone, with possible implications for rupture propagation, continuity, and slip transfer, had not been identified. However, fault splays that project eastward from the Rodgers Creek Fault have been mapped and hypothesized to accommodate slip transfer to the Bennett Valley Fault Zone (Hecker and Randolph Loar, 2018). The generally subtle and distributed nature of surface-rupture evidence along the Bennett Valley and southernmost Maacama Fault Zones, and extensive vegetation cover, had left recent faulting previously unmapped along most of the zone. The map presented here represents a new compilation of inferred surface-rupture features detected using high-resolution topographic lidar data from an airborne lidar survey of Sonoma County, California (OpenTopography, 2014). These data, which enable subtle topographic features to be discerned, indicate that recent (likely Holocene) surface ruptures extend throughout the Bennett Valley and southernmost Maacama Fault Zones. The rupture-lineament map was created using a GIS (geographic information system) framework and is included herein as an image map at a scale of 1:36,000 and as digital datasets (included as supplemental information to this report). The mapping is intended to lay the groundwork for future studies designed to better characterize how plate-boundary slip is accommodated on this important and complex system of faults.

California↗

USGS2026

Special issue “The 2024 M7.6 Noto Peninsula earthquake and seismic swarm”

The 2024 Mw7.5 (M JMA 7.6) Noto Peninsula earthquake struck the Noto Peninsula, central Japan on January 1, 2024, causing widespread damage. This Mw7.5 mainshock, together with the prolonged seismic swarm that persisted in the northeastern Noto Peninsula since the end of 2020, of which the largest event was the 2023 M JMA 6.5 earthquake, constitutes one of the most significant seismic sequences in Japan in recent decades. The sequence provides a rare opportunity to investigate the complex interplay among swarm activity, fluid migration, fault geometry and distribution, and the preparatory conditions required for a large inland crustal earthquake. Motivated by this scientific context, this special issue brings together studies examining the sequence from diverse disciplinary perspectives, incorporating seismic, geodetic, and tsunami-related observations and modelling.

Noto Peninsula↗