USGS Science⌕ Search

SEARCH · USGS Science

Results for “Chemical Physics”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 883 records · Page 49Linked to original sources
USGS2006

Intensity of quartz cathodoluminescence and trace-element content in quartz from the porphyry copper deposit at Butte, Montana

Textures of hydrothermal quartz revealed by cathodoluminescence using a scanning electron microscope (SEM-CL) reflect the physical and chemical environment of quartz formation. Variations in intensity of SEM-CL can be used to distinguish among quartz from superimposed mineralization events in a single vein. In this study, we present a technique to quantify the cathodoluminescent intensity of quartz within individual and among multiple samples to relate luminescence intensity to specific mineralizing events. This technique has been applied to plutonic quartz and three generations of hydrothermal veins at the porphyry copper deposit in Butte, Montana. Analyzed veins include early quartz-molybdenite veins with potassic alteration, pyrite-quartz veins with sericitic alteration, and Main Stage veins with intense sericitic alteration. CL intensity of quartz is diagnostic of each mineralizing event and can be used to fingerprint quartz and its fluid inclusions, isotopes, trace elements, etc., from specific mineralizing episodes. Furthermore, CL intensity increases proportional to temperature of quartz formation, such that plutonic quartz from the Butte quartz monzonite (BQM) that crystallized at temperatures near 750 ??C luminesces with the highest intensity, whereas quartz that precipitated at ???250 ??C in Main Stage veins luminesces with the least intensity. Trace-element analyses via electron microprobe and laser ablation-ICP-MS indicate that plutonic quartz and each generation of hydrothermal quartz from Butte is dominated by characteristic trace amounts of Al, P, Ti, and Fe. Thus, in addition to CL intensity, each generation of quartz can be distinguished based on its unique trace-element content. Aluminum is generally the most abundant element in all generations of quartz, typically between 50 and 200 ppm, but low-temperature, Main Stage quartz containing 400 to 3600 ppm Al is enriched by an order of magnitude relative to all other quartz generations. Phosphorous is present in abundances between 25 and 75 ppm, and P concentrations in quartz show little variation among quartz generations. Iron is the least abundant of these elements in most quartz types and is slightly enriched in CL-dark quartz in pyrite-quartz veins with sericitic alteration. Titanium is directly correlated with both temperature of quartz precipitation, and intensity of quartz luminescence, such that BQM quartz contains hundreds of ppm Ti, whereas Main Stage quartz contains less than 10 ppm Ti. Our results suggest that Ti concentration in quartz is controlled by temperature of quartz precipitation and that increased Ti concentrations in quartz may be responsible for increased CL intensities.

American Mineralogist↗
USGS1976

Feeding ecology of breeding gadwalls on saline wetlands

The feeding ecology of breeding gadwalls ( Anas strepera ) from saline wetlands in North Dakota was examined in relation to sex, pair mates, reproductive status, food availability, and wetland type during the spring and summer of 1971 and 1972. Esophagi of males and females contained 40.4 and 48.2 percent animal food, respectively, between 17 April and 25 August. Animal foods consumed by paired females varied with reproductive condition and were independent of their mates. Invertebrates increased from 47.7 i?? 17.4 percent in the diet during prelaying to 72.0 i?? 18.4 percent during laying and declined to 46.3 i?? 30.0 percent during postlaying. Aquatic insects dominated the diet during egg-laying and were selected disproportionately relative to their availability. Esophageal contents indicated that diversity of plant and animal foods in the diet varied inversely with specific conductance. Major factors influencing food selection of the breeding birds are discussed as interactions among their physiological status, their anatomical and behavioral characteristics, and the abundance and behavior of food organisms as influenced by chemical and physical features of the environment. The data suggested that these interrelated ecological factors act simultaneously to control the phenology of events and determine the foods utilized.

North Dakota↗
USGS2024

Factors affecting the density of Metabetaeus lohena (Decapoda: Alpheidae) at a high-density anchialine pool environment on the Kona Coast of the Island of Hawai‘i

Caridean shrimps (Caridea) are the dominant macroinvertebrates in most anchialine ecosystems. Hawaiian anchialine ecosystems, primarily composed of shallow surface pools connected to the ocean via hypogeal networks of cracks, tubes, and other voids, support 10 caridean shrimp species, including two federally listed as endangered. Little is known about most of these species. The objective of this study was to identify factors that affect the abundance and distribution of Metabetaeus lohena (Alpheidae), an uncommon species found across the Hawaiian Archipelago, at Kaloko-Honokōhau National Historical Park, Island of Hawai‘i. This park supports the highest concentration of anchialine pools in the State of Hawai‘i and is critical to protecting this threatened ecosystem. During 2017, we measured the density of M. lohena during nighttime surveys, as well as a variety of other biological, physical, and chemical parameters, in 130 pools. Metabetaeus lohena occupied 71.5% of the pools surveyed, with a mean density of 7.32 individuals/m 2 (95% CI = 5.14–9.49). Invasive fish and the endemic shrimp Halocaridina rubra (Atyidae) had the strongest effects on M. lohena density, with negative and positive relations, respectively. In the first estimate of M. lohena density at this scale, our data indicate that Kaloko-Honokōhau supports about 11,480 shrimp (95% CI = 8,054–14,906) in the pools surveyed. Furthermore, our models predict that this park could support an additional 1,695 individuals (95% CI = 955–3,008) for a population of about 13,175 shrimp if fish were removed from 19 pools in which M. lohena are absent.

Hawaii↗
USGS2020

Volcanological applications of unoccupied aircraft systems (UAS): Developments, strategies, and future challenges

Unoccupied aircraft systems (UAS) are developing into fundamental tools for tackling the grand challenges in volcanology; here, we review the systems used and their diverse applications. UAS can typically provide image and topographic data at two orders of magnitude better spatial resolution than space-based remote sensing, and close-range observations at temporal resolutions down to those of video frame rates. Responsive deployments facilitate dense time-series measurements, unique opportunities for geophysical surveys, sample collection from hostile environments such as volcanic plumes and crater lakes, and emergency deployment of ground-based sensors (and robots) into hazardous regions. UAS have already been used to support hazard management and decision-makers during eruptive crises. As technologies advance, increased system capabilities, autonomy and availability, supported by more diverse and lighter-weight sensors, will offer unparalleled potential for hazard monitoring. UAS are expected to provide opportunities for pivotal advances in our understanding of complex physical and chemical volcanic processes.

Volcanica↗
USGS1970

Remote Sensor Application Studies Progress Report, July L, 1968 to June 30, 1969. Controlled Field Experiments

Field Sites have been selected for controlled experiments to analyze physical and chemical parameters affecting the response of electromagnetic radiation to geological materials. Considerations in the selection of the sites are the availability of good exposures of nearly monomineralic rocks, level of geologic understanding, and ease of access. Seven sites, where work is underway or planned, contain extensive outcrops of the following rocks: stanstone, limestone, dolomite, and gypsum. Field measurement of quartz have been conducted at four sites.

Report↗
USGS1962

Molar volumes and densities of minerals

These tables present critically chosen "best values" for the density and molar volume of selected mineral compounds. No attempt was made to be all-inclusive; rather we have tried to present data for chemically and physically well-defined phases for which the molar volume and/or density was knovvn to the order of 0. 2 percent.

Trace Elements Investigations↗
USGS1998

Radiogenic isotopes and the Eastern Mineral Resources Program of the U.S. Geological Survey

Radiogenic isotope geology relies on a small group of naturally occurring but unstable elements that naturally produce energy and disintegrate or decay to more stable atoms of different elements. Because this phenomenon occurs at a known rate, is unaffected by most physical and chemical processes, and takes place over periods of time comparable to the age of the Earth, these elements can be used in radiometric dating or geochronology.

Information Handout↗
USGS1963

Fluvial sediments a summary of source, transportation, deposition, and measurement of sediment discharge

This paper presents a broad but undetailed picture of fluvial sediments in streams, reservoirs, and lakes and includes a discussion of the processes involved in the movement of sediment by flowing water. Sediment is fragmental material that originates from the chemical or physical disintegration of rocks. The disintegration products may have many different shapes and may range in size from large boulders to colloidal particles. In general, they retain about the same mineral composition as the parent rocks. Rock fragments become fluvial sediment when they are entrained in a stream of water. The entrainment may occur as sheet erosion from land surfaces, particularly for the fine particles, or as channel erosion after the surface runoff has accumulated in streams. Fluvial sediments move in streams as bedload (particles moving within a few particle diameters of the streambed) or as suspended sediment in the turbulent flow. The discharge of bedload varies with several factors, which may include particle size and a type of effective shear on the surface of the streambed. The discharge of suspended sediment depends partly on concentration of moving sediment near the streambed and hence on discharge of bedload. However, the concentration of fine sediment near the streambed varies widely, even for equal flows, and, therefore, the discharge of fine sediment normally cannot be computed theoretically. The discharge of suspended sediment also depends on velocity, turbulence, depth of flow, and fall velocity of the particles. In general, the coarse sediment transported by a stream moves intermittently and is discharged at a rate that depends on properties of the flow and of the sediment. If an ample supply of coarse sediment is available at the surface of the streambed, the discharge of the coarse sediment, such as sand, can be roughly computed from properties of the available sediment and of the flow. On the other hand, much of the fine sediment in a stream usually moves nearly continuously at about the velocity of the flow, and even low flows can transport large amounts of fine sediment. Hence, the discharge of fine sediments, being largely dependent on the availability of fine sediment upstream rather than on the properties of the sediment and of the flow at a cross section, can seldom be computed from properties, other than concentrations based directly on samples, that can be observed at the cross section. Sediment particles continually change their positions in the flow; some fall to the streambed, and others are removed from the bed. Sediment deposits form locally or over large areas if the volume rate at which particles settle to the bed exceeds the volume rate at which particles are removed from the bed. In general, large particles are deposited more readily than small particles, whether the point of deposition is behind a rock, on a flood plain, within a stream channel, or at the entrance to a reservoir, a lake, or the ocean. Most samplers used for sediment observations collect a water-sediment mixture from the water surface to within a few tenths of a foot of the streambed. They thus sample most of the suspended sediment, especially if the flow is deep or if the sediment is mostly fine; but they exclude the bedload and some of the suspended sediment in a layer near the streambed where the suspended-sediment concentrations are highest. Measured sediment discharges are usually based on concentrations that are averages of several individual sediment samples for a cross section. If enough average concentrations for a cross section have been determined, the measured sediment discharge can be computed by interpolating sediment concentrations between sampling times. If only occasional samples were collected, an average relation between sediment discharge and flow can be used with a flow-duration curve to compute roughly the average or the total sediment discharges for any periods of time for which the flow-duration c

Bulletin↗
USGS1953

Fluorspar deposits of the Eagle Mountains, Trans-Pecos Texas

The Eagle Mountains are in the southeastern part of Hudspeth County, Tex., about 17 miles southwest of Van Horn and 100 miles southeast of El Paso, Tex. The fluorspar deposits are in the northern and northeastern parts of the mountains, except for the Rocky Ridge deposits, which are near the center of the mountainous mass. A good all-weather road leads south from Allamoore on U. S. Highway 80 to the mine and mill at Spar Valley. With the exception of the Rocky Ridge deposits, all deposits can be reached by ranch roads from the main Spar Valley road. Fluorspar was first found in the Eagle Mountains in 1919, but no development was undertaken until 1942. Since then, mining has been done at Eagle Spring and at the various deposits in Spar Valley. Many other deposits have been found in the area. About 12,000 tons of fluorspar had been shipped previous to January 1949, most of which came from the North ore body in Spar Valley. A mill was built near the deposits In 1945. With the exception of the Eagle Spring and Tank Canyon deposits, both of minor importance, the fluorspar deposits as of 1950 are all controlled by Texas Fluorspar Mines, Inc., of Van Horn, Tex. Cretaceous sedimentary rocks, which crop out on the flanks of the mountains, are overlain by a thick series of Tertiary volcanics that make up much of the central part of the mountains. Low on the northeast side, the Cretaceous rocks are underlain by Permian (?) limestones and the pre-Cambrian Carrizo Mountain schist. The Cretaceous sedimentary rocks range from the Yucca formation of Early Cretaceous (lower Trinity) age through the Eagle Ford formation of Late Cretaceous age. The rocks on the northeast side of the mountains dip southwest, and those on the southwest and west sides dip east-northeast and northeast. The axis of the large syncline thus formed roughly parallels the axis of the range. The igneous rocks occur within the trough of the syncline. Both intrusive and extrusive rocks are present. The extrusive rocks have been separated into three divisions : the lower rhyolitic series, trachyte porphyry, and the upper rhyolitic series. Both rhyolitic series consist of flows, flow breccias, volcanic breccias, and tuffaceous sediments, all predominantly of rhyolitic composition, although tending toward andesite locally. These volcanics have been intruded by a small stock of syenite, named in this report the Eagle Peak syenite, which crops out in the central, higher parts of the mountains. Rhyolite sills have invaded the sedimentary rocks near the margin of the volcanics, and diabase and late rhyolite dikes have intruded both sedimentary and volcanic rocks. Faults are common in the area, and six series of faults have been recognized. Thrusting from the southwest occurred both before and after the igenous activity and the subsequent downwarping of the central part of the mountains. The early thrust faults were followed by high-angle normal and reverse faults that trend northeastward and cut the volcanics. Later normal and reverse faults trending northwestward, and faults with large horizontal displacements trending roughly eastward, also are present, in addition to very late faults trending in a general northwesterly direction. Fluorspar occurs in the Eagle Mountains both as replacement deposits in limestone and as fissure veins, chiefly in rhyolite. Chief among the fissure veins are those occurring along the Rhyolite fault, the Wind Canyon fault, the vein at Shaft 4, and the veins on Fox claims 9 and 10. The most important replacement deposits are in the Rocky Ridge area and in Spar Valley. • At the North ore body in Spar Valley, the fluorine-bearing solutions replaced a series of sandy limestones in the upper beds of the lower part of the Finlay formation. Structural conditions limited the extent of the replaceable beds and consequently of the fluorspar mineralization. The fluorine-bearing solutions represent a very late stage of the igneous activity of the area. The large east-trending faults with their wide zones of gouge and breccia, typified by the Rhyolite and Wind Canyon faults, acted as the major channels for the solutions in their upward course. From these faults, the solutions spread outward into other faults and fractures, chiefly those with a northeasterly trend, and into the adjoining limestones. The physical and chemical nature of the surrounding rock, as well as structural conditions affecting the presence of openings in the rock, were the major controlling factors governing the size, extent, and position of the fluorspar deposits.

Texas↗
USGS1951

Pumice deposits of the Klamath Indian Reservation, Klamath County, Oregon

A large volume of pumice is widely distributed over the Klamath Indian Reservation in 'flow' and 'fall' deposits. The flow material on the Reservation is restricted to the area west of Klamath Marsh, and the fall material is thickest immediately southeast of the Marsh. Tests of the chemical and physical properties of the pumice indicate that the pumice is suitable, with some limitations, for use as an aggregate and as a low-grade abrasive. Preliminary examination also indicates that with proper processing it may have a potential use as pozzuolana. The pumice is similar to material now being marketed for lightweight aggregate in Oregon, but processing of the pumice is necessary to obtain a suitable size distribution of the particles.

Circular↗
USGS2006

Pesticides in the Nation's Streams and Ground Water, 1992–2001

This report is one of a series of publications, The Quality of Our Nation's Waters, that describe major findings of the NAWQA Program on water-quality issues of regional and national concern. This report presents evaluations of pesticides in streams and ground water based on findings for the first decadal cycle of NAWQA. 'Pesticides in the Nation's Streams and Ground Water, 1992-2001' greatly expands the analysis of pesticides presented in 'Nutrients and Pesticides,' which was the first report in the series and was based on early results from 1992 to 1995. Other reports in this series cover additional water-quality constituents of concern, such as volatile organic compounds and trace elements, as well as physical and chemical effects on aquatic ecosystems. Each report builds toward a more comprehensive understanding of regional and national water resources. The information in this series is intended primarily for those interested or involved in resource management, conservation, regulation, and policymaking at regional and national levels. In addition, the information might interest those at a local level who wish to know more about the general quality of streams and ground water in areas near where they live and how that quality compares with other areas across the Nation.

Circular↗
USGS2008

Understanding contaminants associated with mineral deposits

Interdisciplinary studies by the U.S. Geological Survey (USGS) have resulted in substantial progress in understanding the processes that control the release of metals and acidic water from inactive mines and mineralized areas, the transport of metals and acidic water to streams, and the fate and effect of metals and acidity on downstream ecosystems. The potential environmental effects associated with abandoned and inactive mines, resulting from the complex interaction of a variety of chemical and physical processes, is an area of study that is important to the USGS Mineral Resources Program. Understanding the processes contributing to the environmental effects of abandoned and inactive mines is also of interest to a wide range of stakeholders, including both those responsible for managing lands with historically mined areas and those responsible for anticipating environmental consequences of future mining operations. The recently completed (2007) USGS project entitled 'Process Studies of Contaminants Associated with Mineral Deposits' focused on abandoned and inactive mines and mineralized areas in the Rocky Mountains of Montana, Colorado, New Mexico, Utah, and Arizona, where there are thousands of abandoned mines. Results from these studies provide new information that advances our understanding of the physical and biogeochemical processes causing the mobilization, transport, reaction, and fate of potentially toxic elements (including aluminum, arsenic, cadmium, copper, iron, lead, and zinc) in mineralized near-surface systems and their effects on aquatic and riparian habitat. These interdisciplinary studies provide the basis for scientific decisionmaking and remedial action by local, State, and Federal agencies charged with minimizing the effects of potentially toxic elements on the environment. Current (2007) USGS research highlights the need to understand (1) the geologic sources of metals and acidity and the geochemical reactions that release them from their sources, (2) the pathways that facilitate transport from those sources, and (3) the processes that control the fate of the elements once released from the sources. Experts in the fields of economic geology, structural geology, mineralogy, geophysics, geochemistry, hydrology, ground-water modeling, microbiology, and toxicology came together for a series of studies that address these relationships on scales ranging from the microscopic to the watershed. This Circular presents results and highlights from the detailed, interdisciplinary studies that include investigations in both mining-affected areas and mineralized but unmined areas. The first section of the Circular describes laboratory and site-scale field investigations that primarily focus on mineralogic and biologic controls on the source and release of metals and acidity from mine-waste rock and hydrothermally altered areas. The second section describes a set of basin- to watershed-scale studies that not only investigate the source and release of metals and acidity but also the transport of these constituents away from the source areas. The third section is a summary of results from postremediation ecosystem monitoring. For more information on these and other project-related studies, please visit the project Web site at http://minerals.cr.usgs.gov/projects/contaminants/index.html. The Web site includes a complete bibliography and detailed descriptions of each interdisciplinary study.

Circular↗
USGS1980

Isolation of uranium mill tailings and their component radionuclides from the biosphere; some earth science perspectives

Uranium mining and milling is an expanding activity in the. Western United States. Although the milling process yields a uranium concentrate, the large volume of tailings remaining contains about 85 percent of the radioactivity originally associated with the ore. By virtue of the physical and chemical processing of the ore and the redistribution of the contained radionuclides at the Earth's surface, these tailings constitute a technologically enhanced source of natural radiation exposure. Sources of potential human radiation exposure from uranium mill tailings include the emanation of radon gas, the transport of particles by wind and water, and the transport of soluble radionuclides, seeping from disposal areas, by ground water. Due to the 77,000 year half-life of thorium-230, the parent of radium-226, the environmental effects associated with radionuclides contained in these railings must be conceived of within the framework of geologic processes operating over geologic time. The magnitude of erosion of cover materials and tailings and the extent of geochemical mobilization of the contained radionuclides to the atmosphere and hydrosphere should be considered in the evaluation of the potential, long-term consequences of all proposed uranium mill tailings management plans.

Circular↗
USGS2017

A reservoir morphology database for the conterminous United States

The U.S. Geological Survey, in cooperation with the Reservoir Fisheries Habitat Partnership, combined multiple national databases to create one comprehensive national reservoir database and to calculate new morphological metrics for 3,828 reservoirs. These new metrics include, but are not limited to, shoreline development index, index of basin permanence, development of volume, and other descriptive metrics based on established morphometric formulas. The new database also contains modeled chemical and physical metrics. Because of the nature of the existing databases used to compile the Reservoir Morphology Database and the inherent missing data, some metrics were not populated. One comprehensive database will assist water-resource managers in their understanding of local reservoir morphology and water chemistry characteristics throughout the continental United States.

Data Series↗
USGS2005

Occurrence of selected pharmaceutical and non-pharmaceutical compounds, and stable hydrogen and oxygen isotope ratios, in a riverbank filtration study, Platte River, Nebraska, 2001 to 2003, Volume 1

Although studied extensively in recent years in Europe, the occurrence of endocrine disrupters and other organic wastewater compounds in the environment in the United States is not well documented. To better understand the efficiency of riverbank filtration with respect to endocrine disrupting compounds and to evaluate the use of riverbank filtration as an effective means of drinking-water treatment, a study was conducted during 2001-2003 by the U.S. Geological Survey, in cooperation with the U.S. Environmental Protection Agency and the City of Lincoln, at an established riverbank-filtration well field with horizontal collector wells and vertical wells. This study provides information that will be useful for (1) increased understanding of the processes and factors important in controlling the transport of endocrine disrupters, such as pesticides and pharmaceuticals during riverbank filtration, (2) better understanding of the physical and chemical processes that affect riverbank-filtration efficiency, and (3) managing the water resources of the eastern Platte River Basin. This report presents analytical methods and data collected during the study. Data are presented as generalized statistics and in figures showing temporal variations. Sites from which water-quality samples were collected for this study included wastewater sites (a cattle feedlot lagoon, a hog confinement lagoon, and wastewater-treatment plant effluent), surface-water sites (Platte River, Salt Creek, and Loup Power Canal), ground-water sites (one collector well and three vertical wells), and drinking-water sites (raw and finished). Field water-quality properties were measured in samples from these sites. Pharmaceutical compounds were detected often in the wastewater-treatment plant effluent. Surface and ground water showed low-level concentrations of pharmaceuticals. Finished drinking-water samples did not contain detectable concentrations of pharmaceuticals except for low levels of cotinine and caffeine. Antibiotics were found in some of the wastewater samples and twice in Salt Creek. Antibiotics were not detected in any samples from the Platte River or the well field. Surface-water samples were analyzed for total organic carbon and ground-water samples were analyzed for dissolved organic carbon. Samples from all sites were analyzed for major ions. Herbicides commonly detected in surface, ground, and drinking water included acetachlor, alachlor, atrazine, and metolachlor as well as degradates of these compounds. Most of the samples from wastewater sites were found to contain predominantly acetamide degradates. High concentrations of several organic wastewater indicator compounds were detected at the wastewater sites and in Salt Creek. Several organic wastewater indicator compounds were detected multiple times in samples from the Platte River. Bromoform, a by-product of disinfection in the treatment plant, was found in samples from the finished drinking water. Stable hydrogen isotope ratios show a range in seasonal variation of -73.6 per mill to -38.1 per mill relative to Vienna Standard Mean Ocean Water (VSMOW) reference water and -69.2 per mill to -46.5 per mill for surface water and ground water, respectively. Oxygen isotope ratios for surface-water samples varied between -9.86 per mill and -5.05 per mill. Stable oxygen isotope ratios of ground waters varied between -9.62 per mill and -5.81 per mill.

Nebraska↗
USGS2005

Occurrence of selected pharmaceutical and non-pharmaceutical compounds, and stable hydrogen and oxygen isotope ratios in a riverbank filtration study, Platte River, Nebraska, 2002 to 2005, Volume 2

This document is the second volume of a data series report that describes the data collected during a study conducted during 2001 through 2005 by the U.S. Geological Survey, in cooperation with the U.S. Environmental Protection Agency and the City of Lincoln, at an established riverbank-filtration well field with horizontal collector wells and vertical wells. The data were collected as part of a study designed to help researchers better understand the efficiency of riverbank filtration with respect to endocrine disrupting compounds and to evaluate the use of riverbank filtration as an effective means of drinking-water treatment. This study provides information that will be useful for (1) increased understanding of the processes and factors controlling the transport of endocrine disrupters, such as pesticides and pharmaceuticals during riverbank filtration, (2) better understanding of the physical and chemical processes that affect riverbank-filtration efficiency, and (3) managing the water resources of the eastern Platte River Basin. This report presents analytical methods and additional data for pharmaceuticals, dissolved organic carbon (DOC), ultraviolet absorbance at 254 nanometer (nm) wavelength (UV254), specific ultraviolet absorbance (SUVA), nitrilotriacetic acid (NTA), ethylenediaminetetraacetic acid (EDTA), nonylphenol ethoxycarboxylates (NPECs), and stable hydrogen and oxygen isotope ratios that were not available at the time of publication of Volume 1 in the data series. Data are presented as generalized statistics and in figures showing temporal variations. Sites from which water-quality samples were collected for this study included wastewater sites (a cattle feedlot lagoon, a hog confinement lagoon, and wastewater-treatment plant effluent), surface-water sites (Platte River, Salt Creek, and Loup Power Canal), ground-water sites (one collector well and five vertical wells), and drinking-water sites (raw and finished). Field water-quality properties also were measured in samples from these sites. Pharmaceuticals detected at least once in samples collected from the Platte River included 1,7-dimethylxanthine, acetaminophen, caffeine, carbamazapine, and cotinine. Among the ground-water samples, pharmaceutical compounds detected at low concentrations in at least one sample included 1,7-dimethylxanthine, acetaminophen, carbamazapine, and trimethoprim. When analyzing for non-pharmaceutical compounds in samples from the wastewater sites, the wastewater-treatment plant effluent samples had the highest concentrations of each of NTA, EDTA, and NPECs compounds. Surface-water samples from Salt Creek had higher concentrations of EDTA and NPECs than samples from the Platte River. NTA was not detected in any samples from the ground-water sites. EDTA was detected in all samples from all wells. Detectable concentrations of EDTA were also observed in all samples from the raw water and finished water.

Nebraska↗
USGS2008

Radionuclide Data and Calculations and Loss-On-Ignition, X-Ray Fluorescence, and ICP-AES Data from Cores in Catchments of the Animas River, Colorado

The U.S. Departments of Agriculture and Interior Abandoned Mine Lands (AML) Initiative is focused on the evaluation of the effect of past mining practices on the water quality and the riparian and aquatic habitats of impacted stream reaches downstream from historical mining districts located primarily on Federal lands. This problem is manifest in the eleven western states (west of longitude 102 degrees) where the majority of hardrock mines that had past production are located on Federal lands. In areas of temperate climate and moderate to heavy precipitation, the effects of rapid chemical and physical weathering of sulfides exposed on mine-waste dumps and acidic drainage from mines have resulted in elevated metal concentrations in the stream water and stream-bed sediment. The result of these mineral weathering processes has an unquantified impact on the quality of the water and the aquatic and riparian habitats that may limit their recreational resource value. One of the confounding factors in these studies is the determination of the component of metals derived from hydrothermally altered but unmined portions of these drainage basins. Several watersheds have been studied to evaluate the effects of acid mine drainage and acid rock drainage on the near-surface environment. The Animas River watershed in southwestern Colorado contains a large number of past-producing metal mines that have affected the watershed. Beginning in October 1996, the U.S. Geological Survey (USGS) began a collaborative study of these effects under the USGS-AML Initiative. In this report, we present the radionuclide and geochemical analytical results of sediment coring during 1997-1999 from two cores from oxbow lakes 0.5 mi. upstream from the 32nd Street Bridge near Durango, Colo., and from three cores from beaver ponds within the Mineral Creek drainage basin near Silverton, Colo.

Data Series↗
USGS2010

Water-quality data for selected streams in the Mississippi Alluvial Plain ecoregion, northwestern Mississippi, September – October 2007

From September through October 2007, the U.S. Geological Survey, in cooperation with the U.S. Environmental Protection Agency, collected and analyzed water-quality samples from streams in the Yazoo River basin within the Mississippi Alluvial Plain ecoregion in northwestern Mississippi. Water-quality samples were collected at 56 sites in the study area and analyzed for various physical and chemical characteristics including, but not limited to, suspended sediment, nutrients, and chlorophyll a. Additionally, water temperature, pH, specific conductance, and dissolved oxygen data were measured at 28 of the sites using multiparameter water-quality meters at 30-minute intervals for a minimum of 48 hours. Data collected for this project will be used in the development of water-quality criteria for nutrients. The nutrient data will enhance existing datasets and support evaluation of cause and effect relations for nutrient criteria development. In addition, these indicators will assist in the development and evaluation of restoration and remediation plans for water bodies not meeting their designated uses, as stated in the U.S. Environmental Protection Agency's Clean Water Act Section 303(d).

Mississippi↗