USGS Science⌕ Search

SEARCH · USGS Science

Results for “Scanning”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 865 records · Page 48Linked to original sources
USGS1999

Turbidite pathways in Cascadia Basin and Tufts abyssal plain, Part A, Astoria Channel, Blanco Valley, and Gorda Basin

This open-file report was prepared in support of the USGS Earthquake Hazards of Cascadia Project. The primary objective of this phase of the project is to determine recurrence intervals of turbidites in Cascadia basin-floor channel systems and evaluate implications of this event record for the paleoseismic history of the Cascadia subduction zone. The purpose of this study is to determine whether the canyon/channel systems themselves are blocked or deformed in such a way that the downstream turbidite stratigraphy might be biased. To accomplish this investigation approximately 7500 kilometers of pre-existing 3.5 KHz seismic data were evaluated to determine the direction and extent of the Astoria Channel/pathway system, which originates at the base of the Astoria Fan. Additionally, distribution and thickness of turbidite sediment sequences were determined along each identified pathway. Bathymetery and distance were used to determine gradients along the main pathway axis and for each of the secondary pathways that feed into it. Channel pathways were identified on the basis of channel phyisiography, where visible at the seafloor, subbottom channel configuration, and acoustic packets of sediments that might represent turbidite deposits. A principal result of this study is that the Astoria Channel/pathway extends continuously from the base of the Astoria Fan southward along the base of the continental slope through the Blanco Valley, then heads southwestward through the Gorda Basin and into the region of the Escanaba Trough. Additionally it was determined that the Astoria Channel is filled and basically buried for it's full length south of 44 degrees latitude. The 44 North Slump, as defined by Goldfinger (1999, see Map 3 ref.), may have been instrumental in blocking the pathway and thus contributed to the filling of the channel/pathway. Sheets 1 and 2 show the Astoria and secondary turbidite pathways highlighted in blue. Ship survey tracklines are shown for the area studied; they are time and date coded, and color keyed to each ship ID data base listed at the bottom of each sheet. The first letter in the cruise ID is an abbreviation letter for the ship name, the following numbers represent the consecutive cruise number of that year, followed by the year number. The letters at the end of the ID represent the survey area, ie. NC- northern California, NP- north Pacific. Locations of selected sample seismic sections illustrated on sheets 3-5 also are shown. Scales for each of the sheets are the same as for sheets 3-5, which allows for overlaying of track data onto the interpretations shown on Maps A-C. Sheets 3 (MAP A), 4 (MAP B), and 5 (MAP C) show channel pathway location, bathymetric depth based on the USGS COW data base (Ca/Or/Wa), pathway morphology, and thickness of turbidite sediment fill at various locations. The interpreted turbidite sediments are color highlighted on the selected seismic sections to differentiate them from the typical deep sea sediments below and to the side of the turbidite pathways. Thickness of sediment fill, in meters, is shown along major pathways in white circular highlights. The data and interpretations rest on a background of USGS GLORIA side scan sonar imagery (1984) to illustrate the relationship of pathway position to sub sea features. Channel distance points are plotted along channel centerlines at 20,000 m intervals. These points begin at the start of each interpreted channel pathway. A bathymetric depth was assigned to each distance point. These data points were then used to construct channel gradient curves for the Astoria, Eel, Bear Valley, and Mendocino channel pathways. These gradients are plotted on sheet 6 of this report and illustrate the similarities and differences between each of the pathways. Sheet 7 shows various views of the Mendocino/Mattole Canyon heads as an example of useful derivative information of the Seabeam bathymetric data. These views illustrate that the Mendocino pathway probably was directed from it's canyon mouth, to the northwest at an earlier time, but was diverted to the west along the base of the Mendocino Ridge by a major fault event in the recent past. Offset of the southwest channel wall is readily evident in views B and D. This apparent disruption complicates the turbidite history of the Mendocino pathway.

California;Oregon↗
USGS1999

Reconnaissance of chemical and physical characteristics of selected bottom sediments of the Caloosahatchee River and estuary, tributaries, and contiguous bays, Lee County, Florida, July 20-30, 1998

This report summarizes a reconnaissance study, conducted July 20-30, 1998, of chemical and physical characteristics of recently deposited bottom sediments in the Caloosahatchee River and Estuary. Recently deposited sediments were identified using an isotopic chronometer, Beryllium-7 (7Be), a short-lived radioisotope. Fifty-nine sites were sampled in an area that encompasses the Caloosahatchee River (River) about three miles upstream from the Franklin Lock (S-79), the entire tidally affected length of the river (estuary), and the contiguous water bodies of Matlacha Pass, San Carlos Bay, Estero Bay, Tarpon Bay, and Pine Island Sound in Lee County, Florida. Bottom sediments were sampled for 7Be at 59 sites. From the results of the 7Be analysis, 30 sites were selected for physical and chemical analysis. Sediments were analyzed for particle size, total organic carbon (TOC), trace elements, and toxic organic compounds, using semiquantitative methods for trace elements and organic compounds. The semiquantitative scans of trace elements indicated that cadmium, copper, lead, and zinc concentrations, when normalized to aluminum, were above the natural background range at 24 of 30 sites. Particle size and TOC were used to characterize sediment deposition patterns and organic content. Pesticides, polychlorinated biphenyls (PCBs), and carcinogenic polycyclic aromatic hydrocarbons (CaPAHs) were determined at 30 sites using immunoassay analysis. The semiquantitative immunoassay analyses of toxic organic compounds indicated that all of the samples contained DDT, cyclodienes as chlordane (pesticides), and CaPAHs. PCBs were not detected. Based on analyses of the 30 sites, sediments at 10 of these sites were analyzed for selected trace elements and toxic organic compounds, including pesticides, PCBs, and PAHs, using quantitative laboratory procedures. No arsenic or cadmium was detected. Zinc was detected at two sites with concentrations greater than the lower limit of the range of sediment contaminant concentrations that are usually or always associated with adverse effects (Florida Department of Environmental Protection's Sediment Quality Assessment Guidelines). Organochlorine pesticides were detected at four sites at concentrations below the reporting limits; there were no organophosphorus pesticides or PCBs detected. PAHs were detected at eight sites; however, only four sites had concentrations above the reporting limit.

Florida↗
USGS2000

Survey of Lake Ontario bottom sediment off Rochester, New York, to define the extent of jettisoned World War II matériel and its potential for sediment contamination

Military-type matériel was recovered from the bottom of Lake Ontario near Rochester, N.Y., during bottom-trawl, fish-stock surveys at depths of 75 to 180 feet each year from 1978 through 1996. The recovered matériel included many shell-detonator nose cones (2 inches in diameter by about 3.5 inches long); several electronic components; one corroded box of detonators; a corrugated container of mercury-filled capsules; and corroded batteries. Most of the recovered matériel has been identified as defective components of shell detonators (proximity-fuze assemblies) that were jettisoned in the lake to protect them from discovery during World War II. Side-scan SONAR, metal-detector, and ROV (remotely-operated-vehicle) surveys found no evidence of any large piles of matériel containing potentially hazardous, toxic, or polluting materials within the 17-square-mile study site. Many scattered magnetic anomalies were detected in this area, but chemical analysis of bottom sediment and of zebra- and quagga-mussel (Dreissena spp.) tissue indicate that the concentrations of mercury and other heavy metals are within the previously documented ranges for Lake Ontario sediment. The failure of ROV videos and of SCUBA-diver surveys and probes of the lake bottom to locate any debris indicates that most, if not all, of the debris is scattered and buried under a layer of fine-grained sediment and, possibly, mussels.

Open-File Report↗
USGS1999

Seismic and tsunami hazard in Puerto Rico and the Virgin Islands

Executive Summary Puerto Rico and the Virgin Islands are located at an active plate boundary between the North American plate and the northeast corner of the Caribbean plate. The region was subject in historical times to large magnitude earthquakes and devastating tsunamis. A major downward tilt of the sea floor north of Puerto Rico and the Virgin Islands, large submarine rockslides, and an unusually large negative gravity anomaly are also indicative of a tectonically active region. Scientists have so far failed to explain the deformation of this region in a coherent and predictable picture, such as in California, and this has hampered their ability to assess seismic and tsunami hazards in the region. The NE corner of the Caribbean is unique among the seismically-active regions of the United States in that it is mostly covered by water. This fact presents an additional challenge for seismic and tsunami hazard assessment and mitigation. The workshop, convened in San Juan on March 23-24, 1999, was "historic" in that it brought together for the first time a broad spectrum of scientists, engineers, and public and private sector officials who deal with such diverse questions as tectonic models, probabilistic assessment of seismic hazard, prediction of tsunami runup, strong ground motion, building codes, stability of man-made structures, and the public’s preparedness for natural disasters. It was an opportunity for all the participants to find out how their own activity fit into the broad picture of science and how it aids society in hazard assessment and mitigation. In addition, the workshop was offered as a continuing education course at the Colegio de Ingenieros y Agrimensores de Puerto Rico, which assured a rapid dissemination of the results to the local community. A news conference which took place during the workshop alerted the public to the efforts of the USGS, other Federal agencies, the Commonwealth of Puerto Rico, universities and the private sector. During the first day of the workshop, participants from universities, federal institutions, and consulting firms in Puerto Rico, the Virgin Islands, the continental U.S., Dominican Republic, and Europe reviewed the present state of knowledge including a review and discussion of present plate models, recent GPS and seismic reflection data, seismicity, paleoseismology, and tsunamis. The state of earthquake/tsunami studies in Puerto Rico was presented by several faculty members from the University of Puerto Rico at Mayaguez. A preliminary seismic hazard map was presented by the USGS and previous hazard maps and economic loss assessments were considered. During the second day, the participants divided into working groups and prepared specific recommendations for future activities in the region along the six following topics below. Highlights of these recommended activities are: Marine geology and geophysics – Acquire deep-penetration seismic reflection and refraction data, deploy temporary ocean bottom seismometer arrays to record earthquakes, collect high-resolution multibeam bathymetry and side scan sonar data of the region, and in particular, the near shore region, and conduct focussed high-resolution seismic studies around faults. Determine slip rates of specific offshore faults. Assemble a GIS database for available marine geological and geophysical data. Paleoseismology and active faults - Field reconnaissance aimed at identifying Quaternary faults and determining their paleoseismic chronology and slip rates, as well as identifying and dating paleoliquefaction features from large earthquakes. Quaternary mapping of marine terraces, fluvial terraces and basins, beach ridges, etc., to establish framework for understanding neotectonic deformation of the island. Interpretation of aerial photography to identify possible Quaternary faults. Earthquake seismology – Determine an empirical seismic attenuation function using observations from local seismic networks and recently-installed broad-band stations. Evaluate existing earthquake catalogs from local networks and regional stations, complete the catalogs. Transcribe the pre-1991 network data from 9-track tape onto more stable archival media. Calibrate instruments of local networks. Use GPS measurement to constrain deformation rates used in seismic-hazard maps. Engineering – Prepare liquefaction susceptibility maps for the urban areas. Update and improve databases for types of site conditions. Collect site effect observations and near-surface geophysical measurements for future local (urban-area) hazard maps. Expand the number of instruments in the strong motion program. Develop fragility curves for Puerto Rico construction types and details, and carry out laboratory testing on selected types of mass-produced construction. Consider tsunami design in shoreline construction projects. Tsunami hazard - Extract tsunami observations from archives and develop a Caribbean historical tsunami database. Analyze prehistoric tsunami deposits. Collect accurate, up-to-date, near-shore topography and bathymetry for accurate inundation models. Prepare tsunami flooding and evacuation maps. Establish a Caribbean Tsunami Warning System for Puerto Rico and the Virgin Islands. Evaluate local, regional, national, and global seismic networks and equipment, and their role in a tsunami warning system. Societal concerns – Prepare warning messages, protocols, and evacuation routes for earthquake, tsunami, and landslide hazards for Puerto Rico and the U.S. Virgin Islands. Advocate enforcement of existing building codes. Prepare non-technical hazard assessment maps for political and educational uses. Raise the awareness of potentially affected populations by presentations at elementary schools, by the production of a tsunami video, and by distribution of earthquake preparedness manuals in newspaper supplements. Promote partnerships at state and federal level for long-term earthquake and tsunami hazard mitigation. This partnership should also include the private sector such as the insurance industry, telecommunication companies, and the engineering community. The following reports of the various working groups are the cumulative recommendations of the community of scientists, engineers, and public officials, who participated in the workshop. The list of participants and the workshop’s agenda are given in the appendix. Marine and Geology and Geophysics Working Group Paleoseismology and Active Faults Working Group Joint Working Group for Earthquake Seismology and Engineering Tsunami Working Group Societal Concerns Working Group

Puerto Rico and the Virgin Islands↗
USGS1999

Characteristics of the Alaskan 1-Km Advanced Very High Resolution Radiometer data sets used for analysis of vegetation biophysical properties

In this study, data characteristics for composited, multitemporal Advanced Very High Resolution Radiometer data sets for Alaska were assessed for a 7- year period from 1991 to 1997. This involved consideration of the satellite sensors used, data processing performed, and data set compilation, along with an analysis of acquisition date, solar zenith angle, satellite viewing angle, presence of clouds, and registration accuracy for each year. Each year?s worth of data are available on CD-ROM in byte format. All data sets have an initial start date of April 1, but had varying ending dates (mid-September to late October) because of satellite sensor malfunction or the presence of clouds or snow; no data set extended beyond October 31. Satellite scan angles were summarized in seven categories: data obtained at nadir, data within 30, 40, and 55 degrees of nadir, data greater than 55 degrees off nadir, and proportions of the data representing east or west look angles. Minimum, maximum, and average solar zenith angles were provided for each period. Estimates of cloud cover for each period were based on three tests: reflectance gross cloud test, channel 3 minus channel 4, and channel 4 minus channel 5. Registration accuracy was estimated using a gray-level autocorrelation technique. Results of this investigation indicate that the composited data available on CD-ROM should be useful for a number of different regional assessments of Earth cover properties. However, caution is advised when using these data because (1) loss in precision from the conversion to a byte format, (2) low sun angles and high viewing angles in the September and October data, and (3) registration inaccuracies of 2 to 8 pixels.

Alaska↗
USGS1999

Organic compounds and trace elements in the Pocomoke River and tributaries, Maryland

In response to concern about recent blooms of the dinoflagellate, Pfiesteria piscicida, samples of sediment and water were collected from the lower Pocomoke River Basin and were screened for trace elements, pesticides, and other organic compounds. A large group of steroid and fatty acid methyl-ester compounds was detected in streamwater using gas chromatography/mass spectroscopy in scan mode. Some of these steroid compounds have been identified and further quantified in bed-sediment extracts. Spatial patterns of the concentrations of cholesterol suggest that these compounds are linked to the runoff of animal wastes into the river. Many of the organic compounds found in the Pocomoke River sediments have not yet been identified, but at least several are in the class of hormone compounds related to estradiols and have the potential to promote endocrine-disrupting effects in aquatic life. Particulate forms of arsenic and zinc are slightly elevated above normal levels for streams, but the sources for these elements are still undetermined. Several pesticides were found in low, parts-per-trillion concentrations, but were within the ranges commonly found in streams of this region.

Maryland↗
USGS1982

Palaeocopid and podocopid Ostracoda from the Lexington Limestone and Clays Ferry Formation (Middle and Upper Ordovician) of central Kentucky

The Middle through lower Upper Ordovician Lexington Limestone and lower part of the Clays Ferry Formation contain an abundant and diversified ostracode fauna. More than 10,000 specimens belonging to 39 genera and 53 species have been found in 73 collections made by members of the U.S. Geological Survey in cooperation with the Kentucky Geological Survey between 1961 and 1970. Five of the genera and 17 of the species are new. New taxa include the genera Gephyropsis, Ningulella, Phelobythocypris, Quasibollia, and Uninodobolba and the following species: Americoncha dubia, Ballardina millersburgia, Brevidorsa strodescreekensis, Ceratopsis asymme , trica C. fimbriata, Ctenobolbina ventrispinifera, Cystomatochilina reticulotiara, Easchmidtella sinuidorsata, Gephyropsis trachyreticulata, Jonesella gonyloba, Laccoprimitia claysferryensis, L. cryptomorphologica, Leperditella? perplexa, Ningulella paupera, Parenthatia sadievillensis, Silenis kentuckyensis, and Uninodobolba franklinensis. In addition, a new species, Quasibollia copelandi, is described from the Middle Ordovician of Ontario. The type specimens of ostracodes previously described from these formations but not represented in the recent collections are redescribed and refigured. The genus Warthinia Spivey, 1939, is reinstated for Ordovician bolliids with two to four nodes, and the genus Ceratopsis Ulrich, 1894, is reviewed with new figures of all known North American species of the genus. Forty-four collections included enough specimens to warrant quantitative analysis. The temporal and spatial distribution of the genera were defined by using Q-mode cluster analysis based on Sorensen's quantified coefficient of association. The resulting phenogram indicated the existence of eight clusters; these clusters were characterized by calculation of constancy and fidelity measures for each of the variables. Generic diversity, compound generic diversity, and lithologic associations were scanned in an attempt to delineate the paleoecologic regime of each cluster. In general, a trend can be seen in which the higher diversity Phelobythocypris-dominated clusters are found in the muddier rocks and less diverse, highly Ceratopsisdominated clusters in the predominantly carbonate members. An exception to this generalization is found in the limestones of the Strodes Creek Member of the Lexington Limestone which has the highest ostracode diversity. However, the Strodes Creek is found entirely within the confines of the muddy Millersburg Member of the Lexington and is believed to represent a similar environment. Diversity differences in these ostracode associations are thought to be controlled mainly by substrate and kinetic energy level. We suggest that the associations may represent ecologically controlled ostracode assemblages.

Professional Paper↗
USGS1980

Crystals of coexisting alunite and jarosite, Goldfield, Nevada

Alunite (KAl 3 (SO 4 ) 2 (OH) 6 ) and jarosite (KFe 3 (SO 4 ) 2 (OH) 6 ) coexist in optically continuous crystals in a sample from the Goldfield mining district, Esmeralda County, Nev. Beam scans with an electron microprobe indicate that no intermediate minerals of the solid-solution series alunite-jarosite occur in these crystals. An Eh-pH diagram demonstrating the equilibrium relations between alunite, jarosite, and geothite suggests the crystals most likely developed by a rise in Eh, which oxidized ferrous to ferric iron, thus allowing jarosite to precipitate.

Nevada↗
USGS2002

The Effect of Selected Cleaning Techniques on Berkshire Lee Marble: A Scientific Study at Philadelphia City Hall

This report describes a scientific investigation of the effects of eight different cleaning techniques on the Berkshire Lee marble component of the facade of the East Center Pavilion at Philadelphia City Hall; the study was commissioned by the city of Philadelphia. The eight cleaning techniques evaluated in this study were power wash (proprietary gel detergent followed by water rinse under pressure), misting (treatment with potable, nebulized water for 24-36 hours), gommage (proprietary Thomann-Hanry low-pressure, air-driven, small-particle, dry abrasion), combination (gommage followed by misting), Armax (sodium bicarbonate delivered under pressure in a water wash), JOS (dolomite powder delivered in a low-pressure, rotary-vortex water wash), laser (thermal ablation), and dry ice (powdered-dry-ice abrasion delivered under pressure). In our study approximately 160 cores were removed from the building for laboratory analysis. We developed a computer program to analyze scanning-electron-micrograph images for the microscale surface roughness and other morphologic parameters of the stone surface, including the near-surface fracture density of the stone. An analysis of more than 1,100 samples cut from the cores provided a statistical basis for crafting the essential elements of a reduced-form, mixed-kinetics conceptual model that represents the deterioration of calcareous stone in terms of self-organized soiling and erosion patterns. This model, in turn, provided a basis for identifying the variables that are affected by the cleaning techniques and for evaluating the extent to which such variables influence the stability of the stone. The model recognizes three classes of variables that may influence the soiling load on the stone, including such exogenous environmental variables as airborne moisture, pollutant concentrations, and local aerodynamics, and such endogenous stone variables as surface chemistry and microstructure (fracturing, roughness, and so on). This study showed that morphologic variables on the mesoscale to macroscale are not generally affected by the choice of a cleaning technique. The long-term soiling pattern on the building is independent of the cleaning technique applied. This study also showed that soluble salts do not play a significant role in the deterioration of Berkshire Lee marble. Although salts were evident in cracks and fissures of the heavily soiled stone, such salts did not penetrate the surface to a depth of more than a few hundred micrometers. The criteria used to differentiate the cleaning techniques were ultimately based on the ability of each technique to remove soiling without altering the texture of the stone surface. This study identified both the gommage and JOS techniques as appropriate for cleaning ashlar surfaces and the combination technique as appropriate for cleaning highly carved surfaces at the entablatures, cornices, and column capitals.

Professional Paper↗
USGS2007

A brief history of oil and gas exploration in the southern San Joaquin Valley of California:

The Golden State got its nickname from the Sierra Nevada gold that lured so many miners and settlers to the West, but California has earned much more wealth from so-called “black gold” than from metallic gold. The San Joaquin Valley has been the principal source for most of the petroleum produced in the State during the past 145 years. In attempting to assess future additions to petroleum reserves in a mature province such as the San Joaquin Basin, it helps to be mindful of the history of resource development. In this chapter we present a brief overview of the long and colorful history of petroleum exploration and development in the San Joaquin Valley. This chapter relies heavily upon the work of William Rintoul, who wrote extensively on the history of oil and gas exploration in California and especially in the San Joaquin Valley. No report on the history of oil and gas exploration in the San Joaquin Valley would be possible without heavily referencing his publications. We also made use of publications by Susan Hodgson and a U.S. Geological Survey Web site, Natural Oil and Gas Seeps in California (http://seeps.wr.usgs.gov/seeps/index.html), for much of the material describing the use of petroleum by Native Americans in the San Joaquin Valley. Finally, we wish to acknowledge the contribution of Don Arnot, who manages the photograph collection at the West Kern Oil Museum in Taft, California. The collection consists of more than 10,000 photographs that have been scanned and preserved in digital form on CD-ROM. Many of the historical photographs used in this paper are from that collection. Finally, to clarify our terminology, we use the term “San Joaquin Valley” when we refer to the geographical or topographical feature and the term “San Joaquin Basin” when we refer to geological province and the rocks therein.

California↗
USGS2015

Arctic Alaska’s Lower Cretaceous (Hauterivian and Barremian) mudstone succession—Linking lithofacies, texture, and geochemistry to marine processes

We present new images and descriptions of the lithofacies and organic facies of the pebble shale unit and lower part of the Hue Shale (Lower Cretaceous) of Arctic Alaska at a high magnification that illustrates their textural characteristics. Our aims were to describe and determine the distribution of facies in these petroleum source rocks and to identify the processes that formed them. We sampled at high-resolution and applied new petrographic techniques combined with scanning electron microscopy and geochemical analyses to samples collected from three widely spaced sections—located in exposures along the Canning River and continuous core from the Mikkelsen Bay State 1 and Orion 1 wells. Results from these three locations indicate that this succession consists primarily of clay-rich mudstones that are variously silt- or sand-bearing and clay-dominated mudstones that exhibit mainly relict, 2–5 millimeter thick bedding and common but variable microbioturbation, rare macrobioturbation, and common fabrics of pelleted clay and silt. These mudstones contain rare, poorly sorted, silt-rich basal laminae that are often discontinuous and have wavy, sharp bases and crude upward fining. In addition, mud-supported, outsized clasts (dropstones) of fine sand to pebble size are present throughout the succession as isolated clasts or in clusters. We interpret these textures and much of this succession to result from intermittent deposition by suspension settling from melting seasonal sea ice—sometimes sediment-laden—and associated primary productivity. Overall, this mudstone succession fines and deepens upward from the pebble shale unit into the Hue Shale. In the Hue Shale of the Orion well, however, different processes intermittently deposited thin, discrete intervals of coarser sediment that probably represent deposition from density currents. Also in the Hue Shale of the Orion well, several thicker sandstone and silt-dominated mudstone units with discordant, scoured bases and cut and fill structures represent erosion during higher energy events such as major storms. Other lithofacies within the succession are graded tuffs/bentonites and tuffaceous/bentonitic mudstones from episodic volcanic ash falls; these are abundant in the Hue Shale, and very rare in the pebble shale unit of the two wells. Organic-carbon rich strata associated with volcanic ash intervals of the pebble shale unit and Hue Shale in the Mikkelsen 1 well have some of the best petroleum source rock potential determined for this succession. Authigenic pyrite and carbonate-cement-dominated mudstone are also present in both units of all three sections. The carbonate-cemented units indicate breaks in sedimentation and are common in the Hue Shale and in sections of the pebble shale unit interpreted to be more distal, such as along the Canning River. Our results document the variation in facies and textures of the Hauterivian and Barremian Lower Cretaceous mudstone succession of Arctic Alaska. Comparison of these characteristics to the products of modern processes on the North Slope of Alaska, in the Beaufort Sea, and elsewhere suggest that this succession formed primarily from depositional processes related to seasonal sea ice with intermittent fluvial-sourced sediment deposited by density currents and episodic erosion and reworking by storms and other currents.

Alaska↗
USGS2016

Conditions and processes affecting sand resources at archeological sites in the Colorado River corridor below Glen Canyon Dam, Arizona

This study examined links among fluvial, aeolian, and hillslope geomorphic processes that affect archeological sites and surrounding landscapes in the Colorado River corridor downstream from Glen Canyon Dam, Arizona. We assessed the potential for Colorado River sediment to enhance the preservation of river-corridor archeological resources through aeolian sand deposition or mitigation of gully erosion. By identifying locally prevailing wind directions, locations of modern sandbars, and likely aeolian-transport barriers, we determined that relatively few archeological sites are now ideally situated to receive aeolian sand supply from sandbars deposited by recent controlled floods. Whereas three-fourths of the 358 river-corridor archeological sites we examined include Colorado River sediment as an integral component of their geomorphic context, only 32 sites currently appear to have a high degree of connectivity (coupled interactions) between modern fluvial sandbars and sand-dominated landscapes downwind. This represents a substantial decrease from past decades, as determined by aerial-photograph analysis. Thus, we infer that recent controlled floods have had a limited, and declining, influence on archeological-site preservation. Within the study area, overland-flow (gully) erosion is less severe in sand landscapes with active aeolian sand than in landscapes that lack aeolian transport; gullies terminate more commonly in active sand (sand that is mobile by wind rather than stabilized by biologic soil crust). We infer that these characteristics largely result from aeolian sand transport being an effective gully-limiting and gully-annealing mechanism. Aeolian sand activity in the river corridor varies substantially as a function of reach morphology and dominant wind direction relative to the river-corridor orientation, factors that control accommodation space for river-derived sand and the modern sand supply to aeolian dunes. These attributes, together with an inverse correlation between aeolian sand activity and gully occurrence, define varying degrees of net long-term gully-erosion risk for sediment deposits and associated archeological sites in different regions of the river corridor. Over most of the river corridor, including some of the archeologically richest regions, sand is too inactive with respect to aeolian transport to anneal gullies effectively. At eight selected archeological sites that we studied with high-resolution terrestrial lidar scans for more than a year, sand loss by overland flow (gully erosion) and aeolian deflation generally exceeded deposition, such that erosion dominated over most monitoring intervals—even at four sites with strong connectivity to modern sand supply. The Glen Canyon reach of the river corridor appears especially vulnerable to gully erosion. Among the sites that we monitored in detail, erosion generally dominated over deposition to a greater degree at four Glen Canyon sites with no modern sand supply than at four Marble–Grand Canyon sites with aeolian sand supply from controlled-flood sandbars. Although gross annual-scale erosion rates were similar among the Glen Canyon sites and among the Marble–Grand Canyon sites, a relative lack of depositional processes led to greater net erosion at the Glen Canyon sites. Having found no differences in weather patterns to suggest greater erosive forcing in Glen Canyon, and no conclusively influential differences in the slope or watershed area contributing to gully formation, we attribute the greater erosion at the Glen Canyon sites to a combination of inherent geomorphic context (high terraces that do not receive modern sediment supply) and pronounced effects of postdam sediment-supply limitation. We conclude that most of the river-corridor archeological sites are at elevated risk of net erosion under present dam operations. In the present flow regime, controlled floods do not simulate the magnitude or frequency of natural floods, and are not large enough to deposit sand at elevations that were flooded at annual to decadal intervals in predam time. For archeological sites that depend upon river-derived sand, we infer elevated erosion risk owing to a combination of reduced sand supply (both fluvial and aeolian) through (1) the lower-than-natural flood magnitude, frequency, and sediment supply of the controlled-flooding protocol; (2) reduction of open, dry sand area available for wind redistribution under current normal (nonflood) dam operations, which do not include flows as low as natural seasonal low flows and do include substantial daily flow fluctuations; and (3) impeded aeolian sand entrainment and transport owing to increased riparian vegetation growth in the absence of larger, more-frequent floods. If dam operations were to increase the supply of sand available for windblown transport—for example, through larger floods, sediment augmentation, or increased fluvial sandbar exposure by low flows—and also decrease riparian vegetation, the prevalence of active aeolian sand could increase over time, and the propensity for unmitigated gully erosion could decrease. Although the evolution of river-corridor landscapes and archeological sites has been altered fundamentally by the lack of large, sediment-rich floods (flows on the order of 5,000 m 3 /s), some combination of sediment-rich flows above 1,270 m 3 /s, seasonal flows below 226 m 3 /s, and riparian-vegetation removal might increase the preservation potential for sand-dependent archeological resources in the Colorado River corridor.

Arizona↗
USGS2023

Chromium in minerals and selected aquifer materials

Between 1952 and 1964, hexavalent chromium, Cr(VI), was released into groundwater from a Pacific Gas and Electric Company (PG&E) compressor station in Hinkley, California, in the western Mojave Desert 80 miles northeast of Los Angeles, California. In 2015, the extent of anthropogenic Cr(VI) in groundwater in Hinkley and Water Valleys was uncertain, but some Cr(VI) in groundwater may be naturally occurring from rock and aquifer material. To evaluate potential sources of natural Cr(VI), chromium and other selected trace-element concentrations were measured by inductively coupled plasma-mass spectrometry (ICP-MS), with multi-acid digestion, on 34 samples of surficial alluvium and core material from Hinkley and Water Valleys, California, and on 2 samples of alluvium from the mafic Sheep Creek fan to the southwest. Chromium concentrations in Hinkley and Water Valleys ranged from 2 to 110 milligrams per kilogram (mg/kg), with a median concentration of 14 mg/kg; concentrations were highest in weathered mafic hornblende diorite associated with Iron Mountain. High chromium concentrations also were present within fine-textured materials and visually abundant iron- and manganese-oxide coatings on the surfaces of mineral grains. For comparison, chromium concentrations as high as 170 mg/kg were measured in mafic alluvium from the Sheep Creek fan. In contrast, chromium concentrations were lowest in Mojave-type deposits (Mojave River stream and lake margin deposits), with a median of 6 mg/kg. Chromium concentrations measured by ICP-MS compared favorably with concentrations measured by portable (handheld) X-ray fluorescence (pXRF; chapter B), on the basis of least-squares regression results and a coefficient of determination (R 2 ) of 0.97. Minerals in bulk samples and the heavy (dense) mineral fractions isolated from those samples were identified using optical techniques, X-ray diffraction (XRD), and scanning electron microscopy (SEM). Quartz and feldspar were the most abundant minerals, especially within recent and older Mojave River deposits. Chromium concentrations were as high as 1,250 mg/kg in the heavy-mineral fraction, with specific gravity greater than 3.32. Chromium was not commonly detected in the light-mineral fraction, with specific gravity less than 2.85. Most chromium within the heavy-mineral fraction was substituted within magnetite mineral grains less than 100 micrometers (μm) in diameter, and almost no chromite was present within the heavy-mineral fraction. Although magnetite is resistive to weathering, weathering of magnetite to hematite was identified (1) in Miocene materials underlying unconsolidated deposits in the western subarea of Hinkley Valley and (2) in alluvium within Water Valley that contains weathered minerals eroded from Miocene rock. Less-dense, more easily weathered chromium-containing amphiboles, such as actinolite in older Mojave River alluvium and hornblende in locally derived alluvium from Iron Mountain, were identified optically. Magnetite was not identified in weathered hornblende diorite and was less abundant in locally derived materials and in Miocene materials than in Mojave-type deposits. A comparison of ICP-MS data and sequential extraction data shows that approximately 90 percent of chromium in aquifer material within Hinkley and Water Valleys was not extractable and was interpreted to reside within unweathered mineral grains. Most extractable chromium was within the strong acid extractable fraction. Chromium within the weakly sorbed, and specifically sorbed extractable fractions in oxide accumulations within the regulatory Cr(VI) plume is potentially mobile into groundwater with changes in ionic strength or pH. Although Hinkley and Water Valleys are regionally low in chromium, natural geologic sources of chromium may be present in aquifer materials penetrated by wells completed in (1) weathered hornblende diorite bedrock underlying the western subarea; (2) Miocene deposits underlying the western subarea and unconsolidated material in the northern subarea and Water Valley containing basalt or weathered minerals eroded from Miocene deposits; (3) unconsolidated material containing visually abundant iron- and manganese-oxide coatings on the surfaces of mineral grains that are present near the water table and near lithologic or geologic contacts; and (4) brown clay and mudflat/playa deposits in the northern subarea. Brown clay and mudflat/playa deposits in the eastern subarea near Mount General have a low-chromium, felsic mineralogy similar to Mojave River deposits and do not contain high concentrations of chromium; however, manganese(IV) oxides within these materials may facilitate oxidation of trivalent chromium, Cr(III), to Cr(VI).

California↗
USGS2023

Sequestration and reoxidation of chromium in experimental microcosms

Groundwater containing hexavalent chromium, Cr(VI), downgradient from the Pacific Gas and Electric Company (PG&E) Hinkley compressor station in the Mojave Desert, 80 miles northeast of Los Angeles, California, is undergoing bioremediation using added ethanol as a reductant in a volume of the aquifer defined as the in situ reactive zone (IRZ). This treatment reduces Cr(VI) to trivalent chromium, Cr(III), which is rapidly sequestered by sorption to aquifer particle surfaces and by co-precipitation within iron (Fe) or manganese (Mn) bearing minerals forming in place as reduction proceeds. Successful mitigation of the Cr(VI) plume is projected to require 10–95 years, at which time bioremediation with ethanol will likely cease. This projection assumes that Cr(VI) removal is permanent and that no Cr(III) will oxidize back to Cr(VI) in the event of changing hydrologic conditions that may cause oxygen-rich water to re-enter the IRZ. Laboratory microcosm experiments were done to explore the process of reductive sequestration of Cr(VI) to Cr(III) and the potential for reoxidation of Cr(III) to Cr(VI). In reductive sequestration experiments, batch microcosms were prepared with aquifer materials collected from sites upgradient of the Cr(VI) regulatory plume. Control microcosms were prepared using Fe- and Mn-coated quartz sand. Unfiltered Mojave River groundwater containing an added tracer of isotopically labeled chromium-50 were reacted with microcosm materials for up to 2 years; during this time, bio-reduction was stimulated by repeated additions of diluted ethanol to maintain reduced conditions within appropriate ranges, avoiding sulfate reducing or methanogenic conditions as much as possible while mimicking field conditions. Analysis of chromium-50, Fe, and Mn obtained by sequential extraction from microcosms harvested (incubation terminated and microcosm contents analyzed) at various times showed that some aqueous chromium (Cr) was sorbed to particle surfaces within hours; reduction to Cr(III) and incorporation into amorphous and crystalline solid phases occurred during the next few months. Amorphous Cr-containing fractions included Fe and Mn hydroxides and organic matter. Ultimately, most of the chromium-50 tracer was present in the less reactive crystalline phase. However, Fe and Mn were broadly distributed at later stages of reduction, and both were spatially co-located with Cr on a micrometer (μm) scale. Solid-phase data collected using scanning electron microscopy with energy dispersive spectroscopy (SEM-EDS) and X-ray absorption spectroscopy (XAS) indicated that some Cr(III) was associated with mixed valence Fe oxides like magnetite and Fe-Mn oxides like jacobsite. Additionally, Cr(III) was observed within several μm of Fe and Mn embedded in clays and in mineral coatings. To evaluate the potential for reoxidation of Cr(III) to Cr(VI), additional batch microcosms of aquifer materials and mixtures of Fe- and Mn-coated sand were first reduced for more than 1 year and subsequently oxidized for almost 2 years. Hexavalent chromium was formed and was available for release to the aqueous phase during oxidation of all materials; however, the timing and amount of Cr(VI) formed and released varied among substrates. Artificial substrates containing more Mn produced more Cr(VI). Site material characteristic of recent Mojave River deposits contained within the IRZ produced the least Cr(VI) during oxidation, while site materials composed of older Mojave River aquifer material (containing more Mn) produced more Cr(VI). Site material collected from within the IRZ contained more Cr but produced an intermediate amount of Cr(VI) following oxidation. The combined results of microcosm chemistry and solid-phase analyses showed that the nature and locus of Cr(III) sequestration influenced its vulnerability to reoxidation to Cr(VI). It was concluded that co-location of Cr with Mn at later stages of reduction influenced the susceptibility of Cr(III) to reoxidation in microcosms. Reoxidation of Cr(III) to Cr(VI) was observed in experiments with previously reduced material after just 14 days exposure to oxygen. As much as 10 percent of added Cr was oxidized to Cr(VI) in microcosms prepared using recent Mojave River aquifer material, and as much as 20 percent of added Cr was oxidized to Cr(VI) in microcosms prepared using older Mojave River aquifer material. Less Cr(VI) (less than 3 percent of Cr added before reduction) was released to the aqueous phase, and this release occurred following longer oxygen exposure. Site managers may need to plan for long-term monitoring and the possibility of active maintenance of anoxic conditions within the IRZ to ensure permanent sequestration of Cr after bioremediation with ethanol ceases.

California↗
USGS2021

Geologic and geophysical maps of the Santa Maria and part of the Point Conception 30'×60' quadrangles, California

This report presents digital geologic, gravity, and aeromagnetic maps for the onshore parts of the Santa Maria and Point Conception 30'x60' quadrangles at a compilation scale of 1:100,000. The map depicts the distribution of bedrock units, surficial deposits, paleontological data, geophysical data and structural features in the Santa Maria basin and the Santa Ynez Mountains to the south, an area corresponding to 26 contiguous 7.5-minute quadrangles. The map also includes offshore faults from the Hosgri fault, a major structural feature, east to the shoreline. This new map revises and supersedes two earlier versions of the 30'x60' Santa Maria quadrangle that were produced as part of the U.S. Geological Survey’s investigations of onshore oil and gas resources of the Santa Maria province (Keller, 1995). The first map was released as a scanned black-and-white image of hand-drawn compilation (Tennyson, 1992); the second map was a digital release that is no longer available (Tennyson and others, 1995). This new map also includes the geology of the onshore part of the adjacent Point Conception 30'x60' quadrangle that encompasses the Santa Ynez Mountains of the western Transverse Ranges. The digital database also contains magnetic and gravity data for the entire region, paleontological data, and interpretation of major offshore structural features that bear on the continuity and connection of the mapped onshore structures.

California↗
USGS2024

Colored shaded relief bathymetry and acoustic backscatter of Ozette Lake, Washington

Offshore of the Pacific Northwest of the United States is the Cascadia Subduction Zone, a 1,000-kilometer-long tectonic boundary defined by a large fault, called a megathrust, that extends from the Mendocino Junction off northern California to the Nootka Fracture Zone off Vancouver Island, Canada (U.S. Geological Survey, 2023). The Juan de Fuca and Gorda oceanic plates to the west of this boundary subduct under the North America continental plate to the east. Several other smaller faults that cut through the North America plate crust also affect the region. Although their effects upon Ozette Lake are uncertain, geological evidence for past earthquakes, such as underwater landslides, may be found in Pacific Northwest lakes. Underwater landslides caused by past earthquakes should be well preserved in these relatively undisturbed lake environments. The floor of Ozette Lake, Washington, located along the Pacific coast of the United States, west of the Puget Sound region and about 140 kilometers east of the megathrust was mapped by the U.S. Geological Survey in July of 2019 to search for evidence of past earthquakes. Mapping was completed using a SWATHplus-M 234-kHz interferometric side scan sonar system pole-mounted on the U.S. Geological Survey research vessel San Lorenzo. The system collected full-coverage bathymetric and acoustic backscatter data that were processed to 2-meter spatial resolution (Dartnell and others, 2024). This two-map series displays the results of this mapping. A colored shaded relief bathymetry map (sheet 1) and an acoustic backscatter map (sheet 2) show the lake floor morphology and backscatter intensities, respectively, that can be analyzed for evidence of past earthquakes.

Washington↗
USGS2025

Colored shaded-relief bathymetry and acoustic backscatter of Lake Sammamish, Washington

Evidence of strong earthquakes (such as underwater landslides and associated deposits) may be recorded within the lacustrine sediments of Pacific Northwest lakes. The floor of Lake Sammamish, Wash., an approximately 11 kilometer (6.8 mile) long, 2 kilometer (1.2 mile) wide, and 35 meter (114.8 feet) deep lake located in a populated region just east of Seattle, was mapped by the U.S. Geological Survey in November of 2021 to search for evidence of past earthquakes. Mapping was conducted using a SWATHplus-M 234-kHz interferometric side-scan sonar system was pole-mounted on the U.S. Geological Survey research vessel Parke Snavely, and the system collected full-coverage bathymetric and acoustic backscatter data, which were processed to 2-meter spatial resolution. Two maps were created, a colored shaded-relief bathymetric map showing lake floor morphology (sheet 1), and an acoustic-backscatter map showing backscatter intensities (sheet 2). The results may then be utilized together to investigate past earthquake activity.

Washington↗
USGS2005

Stream-sediment geochemistry in mining-impacted streams: Sediment mobilized by floods in the Coeur D'Alene-Spokane River system, Idaho and Washington

Environmental problems associated with the dispersion of metal-enriched sediment into the Coeur d'Alene-Spokane River system downstream from the Coeur d'Alene Mining District in northern Idaho have been a cause of litigation since 1903, 18 years after the initiation of mining for lead, zinc, and silver. Although direct dumping of waste materials into the river by active mining operations stopped in 1968, metal-enriched sediment continues to be mobilized during times of high runoff and deposited on valley flood plains and in Coeur d'Alene Lake (Horowitz and others, 1993). To gauge the geographic and temporal variations in the metal contents of flood sediment and to provide constraints on the sources and processes responsible for those variations, we collected samples of suspended sediment and overbank deposits during and after four high-flow events in 1995, 1996, and 1997 in the Coeur d'Alene-Spokane River system with estimated recurrence intervals ranging from 2 to 100 years. Suspended sediment enriched in lead, zinc, silver, antimony, arsenic, cadmium, and copper was detected over a distance of more than 130 mi (the downstream extent of sampling) downstream of the mining district. Strong correlations of all these elements in suspended sediment with each other and with iron and manganese are apparent when samples are grouped by reach (tributaries to the South Fork of the Coeur d'Alene River, the South Fork of the Coeur d'Alene River, the main stem of the Coeur d'Alene River, and the Spokane River). Elemental correlations with iron and manganese, along with observations by scanning electron microscopy, indicate that most of the trace metals are associated with Fe and Mn oxyhydroxide compounds. Changes in elemental correlations by reach suggest that the sources of metal-enriched sediment change along the length of the drainage. Metal contents of suspended sediment generally increase through the mining district along the South Fork of the Coeur d'Alene River, decrease below the confluence of the North and South Forks, and then increase again downstream of the gradient flattening below Cataldo. Metal contents of suspended sediment in the Spokane River below Coeur d'Alene Lake were comparable to those of suspended sediment in the main stem of the Coeur d'Alene River above the lake during the 1997 spring runoff, but with somewhat higher Zn contents. Daily suspended-sediment loads were about 100 times larger in the 1996 flood (50-100-year recurrence interval) than in the smaller 1997 floods (2-5-year recurrence intervals). Significant differences in metal ratios and contents are also apparent between the two flood types. The predominant source of suspended sediment in the larger 1996 flood was previously deposited, metal-enriched flood-plain sediment, identified by its Zn/Pb ratio less than 1. Suspended sediment in the smaller 1997 floods had metal ratios distinct from those of the flood-plain deposits and was primarily derived from metal-enriched sediment stored within the stream channel, identified by a Zn/Pb ratio greater than 1. Sediment deposited during overbank flooding on the immediate streambank or natural levee of the river typically consists of sandy material with metal ratios and contents similar to those of the sandy streambed sediment in the adjacent river reach. Samples of overbank deposits in backlevee marshes collected after the 1996 flood have metal ratios similar to those of peak-flow suspended sediment in the same river reach, but generally lower metal contents.

Idaho, Washington↗