USGS Science⌕ Search

SEARCH · USGS Science

Results for “Research and Exploration”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 865 records · Page 48Linked to original sources

Potential climate-induced runoff changes and associated uncertainty in four Pacific Northwest estuaries

As part of a larger investigation into potential effects of climate change on estuarine habitats in the Pacific Northwest, we estimated changes in freshwater inputs into four estuaries: Coquille River estuary, South Slough of Coos Bay, and Yaquina Bay in Oregon, and Willapa Bay in Washington. We used the U.S. Geological Survey's Precipitation Runoff Modeling System (PRMS) to model watershed hydrological processes under current and future climatic conditions. This model allowed us to explore possible shifts in coastal hydrologic regimes at a range of spatial scales. All modeled watersheds are located in rainfall-dominated coastal areas with relatively insignificant base flow inputs, and their areas vary from 74.3 to 2,747.6 square kilometers. The watersheds also vary in mean elevation, ranging from 147 meters in the Willapa to 1,179 meters in the Coquille. The latitudes of watershed centroids range from 43.037 degrees north latitude in the Coquille River estuary to 46.629 degrees north latitude in Willapa Bay. We calibrated model parameters using historical climate grid data downscaled to one-sixteenth of a degree by the Climate Impacts Group, and historical runoff from sub-watersheds or neighboring watersheds. Nash Sutcliffe efficiency values for daily flows in calibration sub-watersheds ranged from 0.71 to 0.89. After calibration, we forced the PRMS models with four North American Regional Climate Change Assessment Program climate models: Canadian Regional Climate Model-(National Center for Atmospheric Research) Community Climate System Model version 3, Canadian Regional Climate Model-Canadian Global Climate Model version 3, Hadley Regional Model version 3-Hadley Centre Climate Model version 3, and Regional Climate Model-Canadian Global Climate Model version 3. These are global climate models (GCMs) downscaled with regional climate models that are embedded within the GCMs, and all use the A2 carbon emission scenario developed by the Intergovernmental Panel on Climate Change. With these climate-forcing outputs, we derived the mean change in flow from the period encompassing the 1980s (1971-1995) to the period encompassing the 2050s (2041-2065). Specifically, we calculated percent change in mean monthly flow rate, coefficient of variation, top 5 percent of flow, and 7-day low flow. The trends with the most agreement among climate models and among watersheds were increases in autumn mean monthly flows, especially in October and November, decreases in summer monthly mean flow, and increases in the top 5 percent of flow. We also estimated variance in PRMS outputs owing to parameter uncertainty and the selection of climate model using Latin hypercube sampling. This analysis showed that PRMS low-flow simulations are more uncertain than medium or high flow simulations, and that variation among climate models was a larger source of uncertainty than the hydrological model parameters. These results improve our understanding of how climate change may affect the saltwater-freshwater balance in Pacific Northwest estuaries, with implications for their sensitive ecosystems.

Oregon;Washington↗

Shaking is almost always a surprise: The earthquakes that produce significant ground motion

Although small earthquakes are expected to produce weak shaking, ground motion is highly variable and there are outlier earthquakes that generate more shaking than expected—sometimes significantly more. We explore datasets of M 0.5–8.3 earthquakes to determine the relative impact of frequent, smaller-magnitude earthquakes that rarely produce strong ground motion, to rare, large earthquakes that always cause strong shaking. We find that the natural variability of ground motion, combined with the Gutenberg–Richter magnitude–frequency relationship, ensures that most occurrences of any ground motion come from earthquakes of smaller magnitude than expected, often > 2 magnitude units smaller. This holds even for very strong shaking ( > 20% g ), suggesting that M < 7 earthquakes could be a significant source of damage.

Seismological Research Letters↗

Evaluation of bridge-scour data at selected sites in Ohio

Scour data collected during 1989-94 were evaluated to determine whether pier scour and contraction scour occurred at 22 bridge sites in Ohio. Pier-scour depths computed from selected pier-scour prediction equations were compared with measured pier-scour depths, and the accuracy of the prediction equations were evaluated. Observed pier-scour relations were compared to relations developed through laboratory research. Mean streambed elevations were evaluated to determine the depth of contraction scour. Channel stability was assessed by use of mean streambed elevations at the approach section. Ground-penetrating radar was used at all sites to investigate the presence of historical scour. Pier scour was observed in 45 of 47 scour measurements made during floods; 84 cases of pier scour were documented, 83 at solid-wall piers and 1 at a capped-pile type pier. Estimated recurrence intervals for 27 of the 35 measured streamflows, all on unregulated streams, were less than 2 years. Seventeen pier-scour prediction equations were evaluated. The Froehlich Design equation was found to most closely meet the 'best design equation' criteria for all 84 cases of the observed data. The Larras equation was found to be the best design equation for the observed data where approach-flow attack angles were 10 degrees or less. Observed pier-scour depths and flow depths ranged from 0.5 to 6.1 feet and 3.0 to 19.8 feet, respectively. All pier-scour depths were less than 2.4 times the corresponding pier width. Selected factors were normalized by dividing by effective pier width. LOWESS curves were developed using the 84 cases of observed pier scour. Normalized scour depth increased with normalized flow depth; however, the rate of increase appeared to lessen as normalized flow depth exceeded 2.5. Normalized scour depths increased rapidly as flow intensity approached the threshold value of 1 and then decreased as flow intensities exceeded this threshold. Normalized scour depth was found to increase with Froude number, and a steeper slope was evident for Froude numbers exceeding 0.2. Normalized scour depth was found to increase with median grain size up to about 10 millimeters for bed material near the pier, then decrease for median grain sizes greater than 10 millimeters. Normalized scour depth was also found to decrease as sediment gradation of bed material near the pier increased. The observed pier-scour relations determined from the field measurements tend to support conclusions by previous researchers of streambed scour, except for the previous finding that normalized scour depth decreases consistently with increasing median grain size. Possible factors that may have influenced the observed trends in the relation between normalized scour depth and median grain size in this study are cohesion and scour measurements made at nonequilibrium conditions. LOWESS curves were developed for 45 of 84 cases of observed pier scour where approach-flow attack angles were less than or equal to 10 degrees. These curves were visually compared to LOWESS curves developed from all observations of pier scour. For three relations, differences in the trends of the LOWESS curves were of sufficient magnitude to warrant discussion. Contraction scour was observed in 4 of the 47 scour measurements and ranged from 0.8 to2.3 feet in depth. Analysis of annual mean streambed approach-section elevations indicated that approach sections were generally stable at 18 of the 22 sites. Ground-penetrating radar, a geophysical method that enables subsurface exploration of the streambed when conditions are favorable, was used at all sites to determine whether historical scour had occurred. Results of the ground-penetrating radar surveys at 20 sites in 1990 indicated the presence of historical scour surfaces at 5 sites. At four of the five sites showing evidence of possible historical scour, differences between the estimated depth of historical scour and the maximum observed scour were w

Water-Resources Investigations Report↗

Calibrating and testing a gap model for simulating forest management in the Oregon Coast Range

The complex mix of economic and ecological objectives facing today's forest managers necessitates the development of growth models with a capacity for simulating a wide range of forest conditions while producing outputs useful for economic analyses. We calibrated the gap model ZELIG to simulate stand-level forest development in the Oregon Coast Range as part of a landscape-scale assessment of different forest management strategies. Our goal was to incorporate the predictive ability of an empirical model with the flexibility of a forest succession model. We emphasized the development of commercial-aged stands of Douglas-fir, the dominant tree species in the study area and primary source of timber. In addition, we judged that the ecological approach of ZELIG would be robust to the variety of other forest conditions and practices encountered in the Coast Range, including mixed-species stands, small-scale gap formation, innovative silvicultural methods, and reserve areas where forests grow unmanaged for long periods of time. We parameterized the model to distinguish forest development among two ecoregions, three forest types and two site productivity classes using three data sources: chronosequences of forest inventory data, long-term research data, and simulations from an empirical growth-and-yield model. The calibrated model was tested with independent, long-term measurements from 11 Douglas-fir plots (6 unthinned, 5 thinned), 3 spruce-hemlock plots, and 1 red alder plot. ZELIG closely approximated developmental trajectories of basal area and large trees in the Douglas-fir plots. Differences between simulated and observed conifer basal area for these plots ranged from -2.6 to 2.4 m2/ha; differences in the number of trees/ha ???50 cm dbh ranged from -8.8 to 7.3 tph. Achieving these results required the use of a diameter-growth multiplier, suggesting some underlying constraints on tree growth such as the temperature response function. ZELIG also tended to overestimate regeneration of shade-tolerant trees and underestimate total tree density (i.e., higher rates of tree mortality). However, comparisons with the chronosequences of forest inventory data indicated that the simulated data are within the range of variability observed in the Coast Range. Further exploration and improvement of ZELIG is warranted in three key areas: (1) modeling rapid rates of conifer tree growth without the need for a diameter-growth multiplier; (2) understanding and remedying rates of tree mortality that were higher than those observed in the independent data; and (3) improving the tree regeneration module to account for competition with understory vegetation. ?? 2008 Elsevier B.V.

Forest Ecology and Management↗

Advancing the science of microbial symbiosis to support invasive species management: a case study on Phragmites in the Great Lakes

A growing body of literature supports microbial symbiosis as a foundational principle for the competitive success of invasive plant species. Further exploration of the relationships between invasive species and their associated microbiomes, as well as the interactions with the microbiomes of native species, can lead to key new insights into invasive success and potentially new and effective control approaches. In this manuscript, we review microbial relationships with plants, outline steps necessary to develop invasive species control strategies that are based on those relationships, and use the invasive plant species Phragmites australis (common reed) as an example of how development of microbial-based control strategies can be enhanced using a collective impact approach. The proposed science agenda, developed by the Collaborative for Microbial Symbiosis and Phragmites Management, contains a foundation of sequential steps and mutually-reinforcing tasks to guide the development of microbial-based control strategies for Phragmites and other invasive species. Just as the science of plant-microbial symbiosis can be transferred for use in other invasive species, so too can the model of collective impact be applied to other avenues of research and management.

Frontiers in Microbiology↗

Inference for occupancy and occupancy dynamics

This chapter deals with the estimation of occupancy as a state variable to assess the status of, and track changes in, species distributions when sampling with camera traps. Much of the recent interest in occupancy estimation and modeling originated from the models developed by MacKenzie et al. (2002, 2003), although similar methods were developed independently (Azuma et al. 1990; Bayley and Petersen 2001; Nichols and Karanth, 2002; Tyre et al. 2003), all of which deal with species occurrence information and imperfect detection. Less than a decade after these publications, the modeling and estimation of species occurrence and occupancy dynamics have increased significantly. Special features of scientific journals have explored innovative uses of detection–nondetection data with occupancy models (Vojta 2005), and an entire volume has synthesized the use and application of occupancy estimation methods (MacKenzie et al. 2006). Reviews of the topical concepts, philosophical considerations, and various sampling designs that can be used for occupancy estimation are now readily available for a range of audiences (MacKenzie and Royle 2005; MacKenzie et al. 2006; Bailey et al. 2007; Royle and Dorazio 2008; Conroy and Carroll 2009; Kendall and White 2009; Hines et al. 2010; Link and Barker 2010). As a result, it would be pointless here to recast all that these publications have so eloquently articulated, but that said, a review of any scientific topic requires sufficient context and relevant background information, especially when relatively new methodologies and techniques such as occupancy estimation and camera traps are involved. This is especially critical in a digital age where new information is published at warp speed, making it increasingly difficult to stay abreast of theoretical advances and research developments.

Book chapter↗

Ecoregional-scale monitoring within conservation areas, in a rapidly changing climate

Long-term monitoring of ecological systems can prove invaluable for resource management and conservation. Such monitoring can: (1) detect instances of long-term trend (either improvement or deterioration) in monitored resources, thus providing an early-warning indication of system change to resource managers; (2) inform management decisions and help assess the effects of management actions, as well as anthropogenic and natural disturbances; and (3) provide the grist for supplemental research on mechanisms of system dynamics and cause-effect relationships (Fancy et al., 2009). Such monitoring additionally provides a snapshot of the status of monitored resources during each sampling cycle, and helps assess whether legal standards and regulations are being met. Until the last 1-2 decades, tracking and understanding changes in condition of natural resources across broad spatial extents have been infrequently attempted. Several factors, however, are facilitating the achievement of such broad-scale investigation and monitoring. These include increasing awareness of the importance of landscape context, greater prevalence of regional and global environmental stressors, and the rise of landscape-scale programs designed to manage and monitor biological systems. Such programs include the US Forest Service's Forest Inventory and Analysis (FIA) Program (Moser et al., 2008), Canada's National Forest Inventory, the 3Q Programme for monitoring agricultural landscapes of Norway (Dramstad et al., 2002), and the emerging (US) Landscape Conservation Cooperatives (USDOI Secretarial Order 3289, 2009; Anonymous, 2011). This Special Section explores the underlying design considerations, as well as many pragmatic aspects associated with program implementation and interpretation of results from broad-scale monitoring systems, particularly within the constraints of high-latitude contexts (e.g., low road density, short field season, dramatic fluctuations in temperature). Although Alaska is the focus of most papers in this Special Section, we posit that many of the issues that characterize the remote, relatively undisturbed ecosystems of high northern latitudes are widespread and thus applicable to natural-resource management and conservation across northern portions of the Holarctic ecozone and indeed anywhere broad-scale monitoring is contemplated.

Biological Conservation↗

Assessing the relationship between groundwater nitrate and animal feeding operations in Iowa (USA)

Nitrate-nitrogen is a common contaminant of drinking water in many agricultural areas of the United States of America (USA). Ingested nitrate from contaminated drinking water has been linked to an increased risk of several cancers, specific birth defects, and other diseases. In this research, we assessed the relationship between animal feeding operations (AFOs) and groundwater nitrate in private wells in Iowa. We characterized AFOs by swine and total animal units and type (open, confined, or mixed), and we evaluated the number and spatial intensities of AFOs in proximity to private wells. The types of AFO indicate the extent to which a facility is enclosed by a roof. Using linear regression models, we found significant positive associations between the total number of AFOs within 2 km of a well (p trend < 0.001), number of open AFOs within 5 km of a well (p trend < 0.001), and number of mixed AFOs within 30 km of a well (p trend < 0.001) and the log nitrate concentration. Additionally, we found significant increases in log nitrate in the top quartiles for AFO spatial intensity, open AFO spatial intensity, and mixed AFO spatial intensity compared to the bottom quartile (0.171 log(mg/L), 0.319 log(mg/L), and 0.541 log(mg/L), respectively; all p < 0.001). We also explored the spatial distribution of nitrate-nitrogen in drinking wells and found significant spatial clustering of high-nitrate wells (> 5 mg/L) compared with low-nitrate (&le; 5 mg/L) wells ( p = 0.001). A generalized additive model for high-nitrate status identified statistically significant areas of risk for high levels of nitrate. Adjustment for some AFO predictor variables explained a portion of the elevated nitrate risk. These results support a relationship between animal feeding operations and groundwater nitrate concentrations and differences in nitrate loss from confined AFOs vs. open or mixed types.

Iowa↗

ATM Coastal Topography-Alabama 2001

These remotely sensed, geographically referenced elevation measurements of Lidar-derived first surface (FS) topography were produced collaboratively by the U.S. Geological Survey (USGS), Florida Integrated Science Center (FISC), St. Petersburg, FL, and the National Aeronautics and Space Administration (NASA), Wallops Flight Facility, VA. This project provides highly detailed and accurate datasets of the Alabama coastline, acquired October 3-4, 2001. The datasets are made available for use as a management tool to research scientists and natural resource managers. An innovative scanning Lidar instrument originally developed by NASA, and known as the Airborne Topographic Mapper (ATM), was used during data acquisition. The ATM system is a scanning Lidar system that measures high-resolution topography of the land surface, and incorporates a green-wavelength laser operating at pulse rates of 2 to 10 kilohertz. Measurements from the laser ranging device are coupled with data acquired from inertial navigation system (INS) attitude sensors and differentially corrected global positioning system (GPS) receivers to measure topography of the surface at accuracies of +/-15 centimeters. The nominal ATM platform is a Twin Otter or P-3 Orion aircraft, but the instrument may be deployed on a range of light aircraft. Elevation measurements were collected over the survey area using the ATM system, and the resulting data were then processed using the Airborne Lidar Processing System (ALPS), a custom-built processing system developed in a NASA-USGS collaboration. ALPS supports the exploration and processing of Lidar data in an interactive or batch mode. Modules for pre-survey flight line definition, flight path plotting, Lidar raster and waveform investigation, and digital camera image playback have been developed. Processing algorithms have been developed to extract the range to the first and last significant return within each waveform. ALPS is routinely used to create maps that represent submerged or first surface topography.

Alabama↗

Spatial and temporal analysis of geologic slip rates, Cucamonga Fault, California, USA: Implications for along-strike applications and multi-fault rupture

To constrain fault processes and hazard, fault slip rates may be extrapolated over different fault lengths or time intervals. Here, we investigate slip rates for the Cucamonga Fault (CF). The CF is located at the junction of the Transverse Range fault system with the San Andreas and San Jacinto Faults, and it is hypothesized to connect with these faults, promoting the propagation of large, multi-fault earthquakes. Previous work has shown that CF displacements on late Quaternary alluvial fan surfaces are highly variable along strike. We present two new 10 Be surface exposure ages from depth profiles on the alluvial fans. Slip rates are consistent with a rate of 1.4 ± 0.3 m/kyr over time intervals of ∼20, ∼30, and ∼40 kyr. If the CF participates in multi-fault ruptures, then these earthquakes occur either rarely or with sufficient regularity to maintain apparently steady rates over multiple intervals. We also explore along-strike fault displacement variability using a calibrated morphological model. The model successfully reproduces scarp profiles and indicates that fault displacement variability can be explained in part by scarp age but not uplift rate. We infer that both erosion by ephemeral gullying and distributed deformation contribute to fault displacement variability, although both are difficult to detect confidently without excavations across the scarp. These investigations show that better characterization of cumulative-slip variability along strike may improve accuracy and precision of slip rates. Slip rates that do not consider epistemic uncertainties may not be suitable for extrapolation over longer fault sections.

California↗

Living with wildfire in Estes Valley Fire Protection District, Larimer County, Colorado: 2023 Data report

Homeowner wildfire risk mitigation and preparedness are critical components of community wildfire readiness. This report describes the data collected through two efforts conducted in the Estes Valley Fire Protection District of Larimer County, Colorado, study area: (1) parcel-level rapid wildfire risk assessments performed by trained assessors and (2) homeowner surveys in which respondents provided self-assessments of their parcel-level wildfire risk. This project was undertaken to support Estes Valley Fire Protection District’s desire to enhance resident wildfire risk mitigation and evacuation planning. The household surveys also explored the social dimensions of wildfire, including understanding of wildfire risk, outreach or communication preferences, mitigation and evacuation preparedness activities, and perceptions of community risk reduction strategies. The results provide evidence that despite high levels of wildfire awareness and experience, respondents underestimate the risk on their properties as compared to a trained professional and have not completed important steps in the evacuation preparedness process. However, respondents would like more information on wildfire risk reduction via newsletters (mailed or emailed), community meetings, and in-person interactions.

Colorado↗

Western Lake Erie Basin: Soft-data-constrained, NHDPlus resolution watershed modeling and exploration of applicable conservation scenarios

Complex watershed simulation models are powerful tools that can help scientists and policy-makers address challenging topics, such as land use management and water security. In the Western Lake Erie Basin (WLEB), complex hydrological models have been applied at various scales to help describe relationships between land use and water, nutrient, and sediment dynamics. This manuscript evaluated the capacity of the current Soil and Water Assessment Tool (SWAT2012) to predict hydrological and water quality processes within WLEB at the finest resolution watershed boundary unit (NHDPlus) along with the current conditions and conservation scenarios. The process based SWAT model was capable of the fine-scale computation and complex routing used in this project, as indicated by measured data at five gaging stations. The level of detail required for fine-scale spatial simulation made the use of both hard and soft data necessary in model calibration, alongside other model adaptations. Limitations to the model's predictive capacity were due to a paucity of data in the region at the NHDPlus scale rather than due to SWAT functionality. Results of treatment scenarios demonstrate variable effects of structural practices and nutrient management on sediment and nutrient loss dynamics. Targeting treatment to acres with critical outstanding conservation needs provides the largest return on investment in terms of nutrient loss reduction per dollar spent, relative to treating acres with lower inherent nutrient loss vulnerabilities. Importantly, this research raises considerations about use of models to guide land management decisions at very fine spatial scales. Decision makers using these results should be aware of data limitations that hinder fine-scale model interpretation.

Lake Erie Basin↗

Modeling wetland resources for spring migratory waterbirds under different agricultural management scenarios in the Iowa portion of the Prairie Pothole Region, USA

Constructed water quality wetlands, designed to accept tile drainage and surface runoff, are a promising solution for reducing surface water nutrient loading from agricultural systems. In addition to their water quality benefits, these systems may also offset losses of migratory waterbird stopover sites resulting from historical and future agricultural drainage modernization. To assess this possibility, we developed spatially explicit habitat models informed with expert opinion to explore the: 1) potential of water quality wetlands to provide suitable stopover resources for waterbirds during spring migration; and 2) the extent these wetlands can offset likely losses of stopover resources due to drainage modernization. We focused our modeling on the Iowa portion of the Prairie Pothole Region of North America as it was a historically important area within this vital region for waterbirds, but it has experienced widespread subsurface drainage. Model results indicate that unmitigated drainage modernization is likely to have a large negative effect on spring migratory resources for dabbling ducks and shorebirds and minimal effect on diving ducks. Water quality wetland installations are likely to provide habitat for dabbling and diving ducks, but wetland installation is unlikely to completely offset habitat losses for dabbling ducks and shorebirds. Drainage modernization aside, our results indicate that water quality wetlands can address several environmental issues associated with agricultural expansion and intensification by improving water quality and providing wetland resources for waterbirds and other organisms. Field-scale research is needed to validate these results.

Iowa↗

ATM coastal topography-Florida 2001: Western Panhandle

These remotely sensed, geographically referenced elevation measurements of Lidar-derived first surface (FS) topography were produced collaboratively by the U.S. Geological Survey (USGS), Florida Integrated Science Center (FISC), St. Petersburg, FL, and the National Aeronautics and Space Administration (NASA), Wallops Flight Facility, VA. This project provides highly detailed and accurate datasets of the western Florida panhandle coastline, acquired October 2-4 and 7-10, 2001. The datasets are made available for use as a management tool to research scientists and natural resource managers. An innovative scanning Lidar instrument originally developed by NASA, and known as the Airborne Topographic Mapper (ATM), was used during data acquisition. The ATM system is a scanning Lidar system that measures high-resolution topography of the land surface and incorporates a green-wavelength laser operating at pulse rates of 2 to 10 kilohertz. Measurements from the laser-ranging device are coupled with data acquired from inertial navigation system (INS) attitude sensors and differentially corrected global positioning system (GPS) receivers to measure topography of the surface at accuracies of +/-15 centimeters. The nominal ATM platform is a Twin Otter or P-3 Orion aircraft, but the instrument may be deployed on a range of light aircraft. Elevation measurements were collected over the survey area using the ATM system, and the resulting data were then processed using the Airborne Lidar Processing System (ALPS), a custom-built processing system developed in a NASA-USGS collaboration. ALPS supports the exploration and processing of Lidar data in an interactive or batch mode. Modules for presurvey flight line definition, flight path plotting, Lidar raster and waveform investigation, and digital camera image playback have been developed. Processing algorithms have been developed to extract the range to the first and last significant return within each waveform. ALPS is routinely used to create maps that represent submerged or first surface topography.

Florida↗

ATM Coastal Topography-Florida 2001: Eastern Panhandle

These remotely sensed, geographically referenced elevation measurements of Lidar-derived first surface (FS) topography were produced collaboratively by the U.S. Geological Survey (USGS), Florida Integrated Science Center (FISC), St. Petersburg, FL, and the National Aeronautics and Space Administration (NASA), Wallops Flight Facility, VA. This project provides highly detailed and accurate datasets of the eastern Florida panhandle coastline, acquired October 2, 2001. The datasets are made available for use as a management tool to research scientists and natural resource managers. An innovative scanning Lidar instrument originally developed by NASA, and known as the Airborne Topographic Mapper (ATM), was used during data acquisition. The ATM system is a scanning Lidar system that measures high-resolution topography of the land surface and incorporates a green-wavelength laser operating at pulse rates of 2 to 10 kilohertz. Measurements from the laser-ranging device are coupled with data acquired from inertial navigation system (INS) attitude sensors and differentially corrected global positioning system (GPS) receivers to measure topography of the surface at accuracies of +/-15 centimeters. The nominal ATM platform is a Twin Otter or P-3 Orion aircraft, but the instrument may be deployed on a range of light aircraft. Elevation measurements were collected over the survey area using the ATM system, and the resulting data were then processed using the Airborne Lidar Processing System (ALPS), a custom-built processing system developed in a NASA-USGS collaboration. ALPS supports the exploration and processing of Lidar data in an interactive or batch mode. Modules for presurvey flight line definition, flight path plotting, Lidar raster and waveform investigation, and digital camera image playback have been developed. Processing algorithms have been developed to extract the range to the first and last significant return within each waveform. ALPS is routinely used to create maps that represent submerged or first surface topography.

Florida↗

How runoff begins (and ends): characterizing hydrologic response at the catchment scale

Improved understanding of the complex dynamics associated with spatially and temporally variable runoff response is needed to better understand the hydrology component of interdisciplinary problems. The objective of this study was to quantitatively characterize the environmental controls on runoff generation for the range of different streamflow-generation mechanisms illustrated in the classic Dunne diagram. The comprehensive physics-based model of coupled surface-subsurface flow, InHM, is employed in a heuristic mode. InHM has been employed previously to successfully simulate the observed hydrologic response at four diverse, well-characterized catchments, which provides the foundation for this study. The C3 and CB catchments are located within steep, forested terrain; the TW and R5 catchments are located in gently sloping rangeland. The InHM boundary-value problems for these four catchments provide the corner-stones for alternative simulation scenarios designed to address the question of how runoff begins (and ends). Simulated rainfall-runoff events are used to systematically explore the impact of soil-hydraulic properties and rainfall characteristics. This approach facilitates quantitative analysis of both integrated and distributed hydrologic responses at high-spatial and temporal resolution over the wide range of environmental conditions represented by the four catchments. The results from 140 unique simulation scenarios illustrate how rainfall intensity/depth, subsurface permeability contrasts, characteristic curve shapes, and topography provide important controls on the hydrologic-response dynamics. The processes by which runoff begins (and ends) are shown, in large part, to be defined by the relative rates of rainfall, infiltration, lateral flow convergence, and storage dynamics within the variably saturated soil layers.

Water Resources Research↗

Understanding predator-prey-competitor dynamics between Lower Missouri River Macrhybopsis and Scaphirhynchus using a population—bioenergetics model ensemble

The pallid sturgeon Scaphirhynchus albus is a long-lived, endangered fish in the Missouri River. Individuals become piscivorous as adults, so recruitment from stocking or reproduction could reduce populations of prey, including Macrhybopsis chubs. We constructed an individual- and age-based, multi-species, predator-prey-competitor model (IAMP) to represent the benthic community (sturgeons, chubs, and chironomids) of the Lower Missouri River (LMR) to explore scenarios of potential predator-prey-competitor dynamics. Our simulations suggest that chubs alone are unlikely able to support a level of LMR pallid sturgeon similar to historical or current populations. These simulations also suggest that adult pallid sturgeon may need to shift to non-chub prey fish to achieve the greater sizes observed in the Upper Missouri River. When annual hydrologic regimes were included, we found a negative relationship between chub relative abundance and previous year 30-day minimum flows. Inclusion of temporal environmental variability made it clear that large chub populations may be necessary to support LMR pallid sturgeon. When full stochasticity was included in the IAMP, chub population sizes needed to increase further to ensure continued reproduction and recruitment of both chubs and pallid sturgeon. These results support the hypothesis that the pallid sturgeon population in the Lower Missouri River may be food-limited. However, the full extent of this limitation and the management changes needed to address this will require more research on the biology and population dynamics of this fish community, on pallid sturgeon interactions with prey species, and on how sympatric species may be affected during the pallid sturgeon recovery process.

Colorado, Kansas, Minnesota, Missouri, Montana, Ne↗

Optimizing selection of training and auxiliary data for operational land cover classification for the LCMAP initiative

The U.S. Geological Survey’s Land Change Monitoring, Assessment, and Projection (LCMAP) initiative is a new end-to-end capability to continuously track and characterize changes in land cover, use, and condition to better support research and applications relevant to resource management and environmental change. Among the LCMAP product suite are annual land cover maps that will be available to the public. This paper describes an approach to optimize the selection of training and auxiliary data for deriving the thematic land cover maps based on all available clear observations from Landsats 4–8. Training data were selected from map products of the U.S. Geological Survey’s Land Cover Trends project. The Random Forest classifier was applied for different classification scenarios based on the Continuous Change Detection and Classification (CCDC) algorithm. We found that extracting training data proportionally to the occurrence of land cover classes was superior to an equal distribution of training data per class, and suggest using a total of 20,000 training pixels to classify an area about the size of a Landsat scene. The problem of unbalanced training data was alleviated by extracting a minimum of 600 training pixels and a maximum of 8000 training pixels per class. We additionally explored removing outliers contained within the training data based on their spectral and spatial criteria, but observed no significant improvement in classification results. We also tested the importance of different types of auxiliary data that were available for the conterminous United States, including: (a) five variables used by the National Land Cover Database, (b) three variables from the cloud screening ‘‘Function of mask” (Fmask) statistics, and (c) two variables from the change detection results of CCDC. We found that auxiliary variables such as a Digital Elevation Model and its derivatives (aspect, position index, and slope), potential wetland index, water probability, snow probability, and cloud probability improved the accuracy of land cover classification. Compared to the original strategy of the CCDC algorithm (500 pixels per class), the use of the optimal strategy improved the classification accuracies substantially (15-percentage point increase in overall accuracy and 4-percentage point increase in minimum accuracy).

ISPRS Journal of Photogrammetry and Remote Sensing↗