USGS Science⌕ Search

SEARCH · USGS Science

Results for “Quaternary”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 865 records · Page 48Linked to original sources

Manganese Deposits in the Artillery Mountains Region, Mohave County, Arizona

The manganese deposits of the Artillery Mountains region lie within an area of about 25 square miles between the Artillery and Rawhide Mountains, on the west side of the Bill Williams River in west-central Arizona. The richest croppings are on the northeast side of this area, among the foothills of the Artillery Mountains. They are 6 to 10 miles from Alamo. The nearest shipping points are Congress, about 50 miles to the east, and Aguila, about 50 miles to the southeast. The principal manganese deposits are part of a sequence of alluvial fan and playa material, probably of early Pliocene age, which were laid down in a fault basin. They are overlain by later Pliocene (?) basalt flows and sediments and by Quaternary basalt and alluvium. The Pliocene (?) rocks are folded into a shallow composite S1ncline ttat occupies the valley between the Artillery and Rawhide Mountains, and the folded rocks along either side of the valley, together with the overlying Quaternary basalt, are broken by faults that have produced a group of horsts, grabens, and step-fault blocks. The manganiferous beds, lie at two zones, 750 to 1,000 feet apart stratigraphically, each of which is locally as much as 300 to 400 feet thick. The main, or upper, zone contains three kinds of ore - sandstone ore, clay ore, and 'hard' ore. The sandstone and clay ores differ from the associated barren sandstone and clay, with which they are interlayered and into which they grade, primarily in containing a variable proportion of amorphous manganese oxides, besides iron oxides and clayey material such as are present in the barren beds. The 'hard' ore is sandstone that has been impregnated with opal and calcite and in which the original amorphous manganese oxides have been largely converted to psilomelane and manganite. The average manganese content of the sandstone and clay ores is between 3 and 4 percent and that of the 'hard' ore is between 6 and 7 percent. The ore contains an average of 3 percent of iron, 0.08 percent of phosphorus, 1.1 percent of barium, and minute quantities of copper, lead, and zinc. Although the manganese content of the sandstone and clay ore may change abruptly from bed to bed, the content within any individual bed changes gradually, and for any large volume of ore both the nanganese and iron content are remarkably uniform. Explorations to June 1941 consisted chiefly of 49 holes diamond-drilled in the upper zone on the Artillery Mountains side of the area. The district is estimated to contain an assured minimum of 200,000,000 tons of material having an average manganese content of 3 to 4 percent. About 20,000,000 tons of this total contains 5 percent or more of manganese, and 2,000,000 to 3,000,000 tons contains 10 percent or more. To what extent these deposits can be utilized is a metallurgical and economic problem. Although the clay and sandstone ores, as well as the 'hard' ore, are present in large tonnages, the 'hard' ore is the only kind that combines minable tonnage with promising grade. About 15,000,000 tons of 'hard' ore is present; about 500,000 tons of this contains 15 percent or more of manganese and averages 17 percent, and somewhat over 2,000,000 tons contains 10 percent or more and averages nearly 13 percent. Except for closer drilling to determine such things as the tonnage, grade, spacing, and form of the richer shoots with greater accuracy before beginning to mine them, further explorations are not recommended, for any new ore found is likely to be similar, both in grade and kind, to that already discovered.

Arizona↗

Geologic and hydrologic characterization and evaluation of the Basin and Range Province relative to the disposal of high-level radioactive waste: Part II, Geologic and hydrologic characterization

The geology and hydrology of the Basin and Range Province of the western conterminous United States are characterized in a series of data sets depicted in maps compiled for evaluation of prospective areas for further study of geohydrologic environments for isolation of high-level radioactive waste. The data sets include: (1) Average precipitation and evaporation; (2) surface distribution of selected rock types; (3) tectonic conditions; and (4) surface- and ground -water hydrology and Pleistocene lakes and marshes. Rocks mapped for consideration as potential host media for the isolation of high-level radioactive waste are widespread and include argillaceous rocks, granitic rocks, tuffaceous rocks, mafic extrusive rocks, evaporites, and laharic breccias. The unsaturated zone, where probably as thick as 150 meters (500 feet), was mapped for consideration as an environment for isolation of high-level waste. Unsaturated rocks of various lithologic types are widespread in the Province. Tectonic stability in the Quaternary Period is considered the key to assessing the probability of future tectonism with regard to high-level radioactive waste disposal. Tectonic conditions are characterized on the basis of the seismic record, heat-flow measurements, the occurrence of Quaternary faults, vertical crustal movement, and volcanic features. Tectonic activity, as indicated by seismicity, is greatest in areas bordering the western margin of the Province in Nevada and southern California, the eastern margin of the Province bordering the Wasatch Mountains in Utah and in parts of the Rio Grande valley. Late Cenozoic volcanic activity is widespread, being greatest bordering the Sierra Nevada in California and Oregon, and bordering the Wasatch Mountains in southern Utah and Idaho. he arid to semiarid climate of the Province results in few perennial streams and lakes. A large part of the surface drainage is interior and the many closed basins commonly are occupied by playas or dry lake beds. The Province is divided into ground-water flow units defined on the basis of ground-water divides, ground-water flow lines, and surface streams that receive ground-water discharge. Ground water contains less than 500 milligrams per liter of dissolved solids throughout most of the Province. Ground water is more mineralized in areas underlain by evaporitic rocks, overlain by playas, and near saline lakes. Ground water is of the calcium, magnesium, or sodium bicarbonate type in the areas where dissolved-solids concentrations are less than 500 milligrams per liter, and of the calcium, magnesium, or sodium sulfate or chloride type where dissolved-solids concentrations are greater than 500 milligrams per liter. Geologic and hydrologic evidence is found for about 100 lakes and marshes that existed during the Pleistocene Epoch. The possibility of a recurrence of pluvial conditions, such as existed in the Pleistocene, is of concern in repository siting because of possible changes in hydrologic conditions. The Pleistocene lakes and marshes provide clues to the hydrology during pluvial climates.

Arizona, California, Idaho, Nevada, New Mexico, Or↗

A synthesis engine for constructing geologic maps of the United States

The geologic history of the United States is cataloged in thousands of geologic maps produced during many decades. However, the disparate nature of these individual maps makes it challenging to assess resources, research geologic histories, or characterize natural hazards holistically across the Nation. The U.S. House of Representatives 2020 appropriations bill for the U.S. Department of the Interior (H.R. 116-100) requires the U.S. Geological Survey to “bring together detailed national and continental-resolution [two-dimensional] and [three-dimensional] information produced throughout the Survey and by [F]ederal and [S]tate partners.” In response to this directive, this report presents a compilation and synthesis of geologic maps across the United States in the form of a relational database. The synthesis database includes thematic maps that synthesize the Nation’s geology, and retains the original input maps as well as linkages to standardized vocabularies to aid the discoverability of geologic information. Specifically, the synthesis database is targeted toward producing four National-resolution maps for the conterminous United States: Quaternary geology, the geology at the Earth’s surface, pre-Quaternary geology, and Precambrian geology. In addition, the synthesis database includes the infrastructure necessary to expand to additional resolutions in the future.

conterminous United States↗

Geologic map of the Wenatchee 1:100,000 quadrangle, central Washington: A digital database

This digital map database has been prepared by R.W. Tabor from the published Geologic map of the Wenatchee 1:100,000 Quadrangle, Central Washington. Together with the accompanying text files as PDF, it provides information on the geologic structure and stratigraphy of the area covered. The database delineates map units that are identified by general age and lithology following the stratigraphic nomenclature of the U.S. Geological Survey. The authors mapped most of the bedrock geology at 1:100,000 scale, but compiled Quaternary units at 1:24,000 scale. The Quaternary contacts and structural data have been much simplified for the 1:100,000-scale map and database. The spatial resolution (scale) of the database is 1:100,000 or smaller. This database depicts the distribution of geologic materials and structures at a regional (1:100,000) scale. The report is intended to provide geologic information for the regional study of materials properties, earthquake shaking, landslide potential, mineral hazards, seismic velocity, and earthquake faults. In addition, the report contains information and interpretations about the regional geologic history and framework. However, the regional scale of this report does not provide sufficient detail for site development purposes.

Washington↗

Database for the geologic map of the Chelan 30-minute by 60-minute quadrangle, Washington (I-1661)

This digital map database has been prepared by R. W. Tabor from the published Geologic map of the Chelan 30-Minute Quadrangle, Washington. Together with the accompanying text files as PDF, it provides information on the geologic structure and stratigraphy of the area covered. The database delineates map units that are identified by general age and lithology following the stratigraphic nomenclature of the U.S. Geological Survey. The authors mapped most of the bedrock geology at 1:100,000 scale, but compiled Quaternary units at 1:24,000 scale. The Quaternary contacts and structural data have been much simplified for the 1:100,000-scale map and database. The spatial resolution (scale) of the database is 1:100,000 or smaller. This database depicts the distribution of geologic materials and structures at a regional (1:100,000) scale. The report is intended to provide geologic information for the regional study of materials properties, earthquake shaking, landslide potential, mineral hazards, seismic velocity, and earthquake faults. In addition, the report contains information and interpretations about the regional geologic history and framework. However, the regional scale of this report does not provide sufficient detail for site development purposes.

Washington↗

Database for the geologic map of the Snoqualmie Pass 30-minute by 60-minute quadrangle, Washington (I-2538)

This digital map database has been prepared by R.W. Tabor from the published Geologic map of the Snoqualmie Pass 30' X 60' Quadrangle, Washington. Together with the accompanying text files as PDF, it provides information on the geologic structure and stratigraphy of the area covered. The database delineates map units that are identified by general age and lithology following the stratigraphic nomenclature of the U.S. Geological Survey. The authors mapped most of the bedrock geology at 1:100,000 scale, but compiled Quaternary units at 1:24,000 scale. The Quaternary contacts and structural data have been much simplified for the 1:100,000-scale map and database. The spatial resolution (scale) of the database is 1:100,000 or smaller. This database depicts the distribution of geologic materials and structures at a regional (1:100,000) scale. The report is intended to provide geologic information for the regional study of materials properties, earthquake shaking, landslide potential, mineral hazards, seismic velocity, and earthquake faults. In addition, the report contains information and interpretations about the regional geologic history and framework. However, the regional scale of this report does not provide sufficient detail for site development purposes.

Data Series↗

Database for the geologic map of the Sauk River 30-minute by 60-minute quadrangle, Washington (I-2592)

This digital map database has been prepared by R.W. Tabor from the published Geologic map of the Sauk River 30- by 60 Minute Quadrangle, Washington. Together with the accompanying text files as PDF, it provides information on the geologic structure and stratigraphy of the area covered. The database delineates map units that are identified by general age and lithology following the stratigraphic nomenclature of the U.S. Geological Survey. The authors mapped most of the bedrock geology at 1:100,000 scale, but compiled most Quaternary units at 1:24,000 scale. The Quaternary contacts and structural data have been much simplified for the 1:100,000-scale map and database. The spatial resolution (scale) of the database is 1:100,000 or smaller. This database depicts the distribution of geologic materials and structures at a regional (1:100,000) scale. The report is intended to provide geologic information for the regional study of materials properties, earthquake shaking, landslide potential, mineral hazards, seismic velocity, and earthquake faults. In addition, the report contains information and interpretations about the regional geologic history and framework. However, the regional scale of this report does not provide sufficient detail for site development purposes.

Data Series↗

Database for the geologic map of upper Eocene to Holocene volcanic and related rocks in the Cascade Range, Washington

This geospatial database for a geologic map of the Cascades Range in Washington state is one of a series of maps that shows Cascade Range geology by fitting published and unpublished mapping into a province-wide scheme of lithostratigraphic units. Geologic maps of the Eocene to Holocene Cascade Range in California and Oregon complete the series, providing a comprehensive geologic map of the entire Cascade Range that incorporates modern field studies and that has a unified and internally consistent explanantion. The complete series will be useful for regional studies of volcanic hazards, volcanology, and tectonics. Originally a project supported by the Geothermal Research Program of the U.S. Geological Survey, the maps emphasize Quaternary volcanic rocks, because large igneous-related hydrothermal systems that have high temperatures are associated with Quaternary volcanic fields. Rocks older than a few million years are also included on the maps as they help to unravel geologic puzzles of the present-day Cascade Range. The deeply eroded older volcanoes found in the Western Cascades physiographic subprovince are analogues of today's snow-covered shield volcanoes and stratovolcanoes. The fossil hydrothermal systems of the Eocene to Pliocene vents now exposed provide clues to processes active today beneath the Pleistocene and Holocene volcanic peaks along the present-day crest of the Cascade Range. Study of these older rocks can aid in developing models of geothermal systems. These rocks also give insight into the origins of volcanic-hosted mineral deposits and even to future volcanic hazards. This digital database contains information used to produce the geologic map published as Sheet 1 in U.S. Geological Survey Miscellaneous Investigations Series Map I-2005. (Sheet 2 of Map I-2005 shows sources of geologic data used in the compilation and is available separately). Sheet 1 of Map I-2005 shows the distribution and relations of volcanic and related rock units in the Cascade Range of Washington at a scale of 1:500,000. This digital release is produced from stable materials originally compiled at 1:250,000 scale that were used to publish Sheet 1. The database therefore contains more detailed geologic information than is portrayed on Sheet 1. This is most noticeable in the database as expanded polygons of surficial units and the presence of additional strands of concealed faults. No stable compilation materials exist for Sheet 1 at 1:500,000 scale. The main component of this digital release is a spatial database prepared using geographic information systems (GIS) applications. This release also contains links to files to view or print the map sheet, main report text, and accompanying mapping reference sheet from Map I-2005. For more information on volcanoes in the Cascade Range in Washington, Oregon, or California, please refer to the U.S. Geological Survey Volcano Hazards Program website.

Washington↗

Geologic map of the Lead Mountain 15’ quadrangle, San Bernardino County, California

The Lead Mountain 15’ quadrangle in the Mojave Desert contains a record of Jurassic, Cretaceous, Tertiary, and Quaternary magmatism. Small amounts of Mesoproterozoic(?) augen gneiss and Paleozoic and Mesozoic(?) metasedimentary rocks are preserved in small patches; they are intruded by voluminous Jurassic plutons of quartz diorite to granite composition and by Late Cretaceous granite of the Cadiz Valley batholith. Jurassic intrusive rocks include part of the Bullion Mountain Intrusive Suite and also younger dikes inferred to be part of the Jurassic Independence dike swarm. A contact-metamorphosed aureole 2 km wide in the Jurassic plutonic rocks fringes the Cadiz Valley batholith. Early Miocene dacitic magmatism produced a dense swarm of dikes in the eastern Bullion Mountains and the volcanic-intrusive remnant of a volcano at Lead Mountain. Tilting of the dike swarm from inferred vertical orientations may have resulted from Miocene tectonic extension. Conglomerate of Pliocene and (or) Miocene age is also tilted. Younger volcanism is recorded by Pliocene basalt of the Deadman Lake volcanic field, basalt of Lead Mountain (approximately 0.36 Ma), and the even younger basalt of Amboy. Quaternary sedimentation built alluvial fans and filled playas in the map area. Faulting in the dextral eastern California shear zone produced several northwest-striking faults in the quadrangle, some of them active into the Pleistocene and some that may have many kilometers of right-lateral offset.

California↗

Seismotectonic map of the Puget Sound region, Washington

The Puget Sound region is a seismically active area with hundreds of earthquakes occurring each year (Crosson, 1974, 1975, Crosson and Millard, 1975, Crosson and Noson, 1978a, 1978b, 1979). Most of the earthquakes are so small that they can be detected only by sensitive seismographs such as those operated by the University of Washington. Not all of the earthquakes have been small, however, for several damaging ones have occurred in historic time. Little is known about the geologic structures responsible for generating these earthquakes, and knowledge of the causative structures is fundamental to an adequate evaluation of the earthquake risks for the Puget Sound region. The purpose of this map is to summarize the current knowledge about tectonic deformation, seismicity, and the tectonic framework of the Puget Sound region in order to provide a basis for detailed geologic and geophysical studies that will lead to better understanding of the structures and forces responsible for generating earthquakes in the area. This map is a compilation of all known and inferred faults, including what is known about their age of movement. Also shown are some deformed deposits of Quaternary age and earthquake epicenters. Few of the faults have been studied in sufficient detail to establish whether or not they have been active or inactive during late Tertiary or Quaternary time, but most of the faults are the result of tectonic forces that were active during early and middle Tertiary time. These faults may or may not be related to the tectonic forces responsible for the current seismicity. Approximately 5 percent of the earthquakes recorded in the Puget Sound region originated at depths of 40 Km or more (Crosson, 1972, fig. 11), and these are probably not directly related to exposed or near-surface structures. Most of the earthquakes occur at shallower depths and may be associated with near-surface structures, but no earthquakes have been definitely identified with mapped faults.

Washington↗

Geologic map of upper Eocene to Holocene volcanic and related rocks in the Cascade Range, Washington

Since 1979 the Geothermal Research Program of the U.S. Geological Survey has carried out a multidisciplinary research effort in the Cascade Range. The goal of this research is to understand the geology, tectonics, and hydrology of the Cascades in order to characterize and quantify geothermal resource potential. A major goal of the program is compilation of a comprehensive geologic map of the entire Cascade Range that incorporates modern field studies and that has a unified and internally consistent explanation. This map is one of a series presently being compiled that shows Cascade Range geology by fitting published and unpublished mapping into a province-wide scheme of lithostratigraphic units; map sheets of the Cascade Range in California and in Oregon complete the series. The complete series forms a guide to exploration and evaluation of the geothermal resources of the Cascade Range and will be useful for studies of volcanic hazards, volcanology, and tectonics. For geothermal reasons, the maps emphasize Quaternary volcanic rocks. Large igneous-related geothermal systems that have high temperatures are associated with Quaternary volcanic fields, and geothermal potential declines rapidly as age increases (Smith and Shaw, 1975). Most high-grade recoverable geothermal energy is likely to be associated with silicic volcanism less than 1 Ma. Lower grade (= lower temperature) geothermal resources may be associated with somewhat older rocks; however, volcanic rocks older than about 2 Ma are unlikely geothermal targets (Smith and Shaw, 1975).

Washington↗

Geologic map of the Kanab 30' x 60' quadrangle, Utah and Arizona

The 1:100,000-scale geologic map of the sparsely populated Kanab 30' x 60' quadrangle in southernmost Utah and a narrow strip in northernmost Arizona delineates 17 formations and numerous subdivisions of sedimentary rock units of Permian, Triassic, Jurassic, Cretaceous, and Tertiary ages; 12 Quaternary alluvial, eolian, and mass-wasting units; and Quaternary basaltic igneous rocks and vents.Units within the Straight Cliffs Formation are correlated with those of the Kaiparowits Plateau. Palynological edidence indicates that the Kaiparowits(?) Formation is older than the type formation in the Kaiparowits Plateau. Structures include parts of the Sevier, Kanab Creek, Johnson Canyon, and Paunsaugunt fault zones. Regional dip is generally northeast at very low angles. Coal beds are presentin the upper unit of the Straight Cliffs Formation, in the Tropic Shale, and in the Dakota Formation.

IMAP↗

Geologic map of the Yucca Mountain region, Nye County, Nevada

Yucca Mountain, Nye County, Nev., has been identified as a potential site for underground storage of high-level radioactive waste. This geologic map compilation, including all of Yucca Mountain and Crater Flat, most of the Calico Hills, western Jackass Flats, Little Skull Mountain, the Striped Hills, the Skeleton Hills, and the northeastern Amargosa Desert, portrays the geologic framework for a saturated-zone hydrologic flow model of the Yucca Mountain site. Key geologic features shown on the geologic map and accompanying cross sections include: (1) exposures of Proterozoic through Devonian strata inferred to have been deformed by regional thrust faulting and folding, in the Skeleton Hills, Striped Hills, and Amargosa Desert near Big Dune; (2) folded and thrust-faulted Devonian and Mississippian strata, unconformably overlain by Miocene tuffs and lavas and cut by complex Neogene fault patterns, in the Calico Hills; (3) the Claim Canyon caldera, a segment of which is exposed north of Yucca Mountain and Crater Flat; (4) thick densely welded to nonwelded ash-flow sheets of the Miocene southwest Nevada volcanic field exposed in normal-fault-bounded blocks at Yucca Mountain; (5) upper Tertiary and Quaternary basaltic cinder cones and lava flows in Crater Flat and at southernmost Yucca Mountain; and (6) broad basins covered by Quaternary and upper Tertiary surficial deposits in Jackass Flats, Crater Flat, and the northeastern Amargosa Desert, beneath which Neogene normal and strike-slip faults are inferred to be present on the basis of geophysical data and geologic map patterns. A regional thrust belt of late Paleozoic or Mesozoic age affected all pre-Tertiary rocks in the region; main thrust faults, not exposed in the map area, are interpreted to underlie the map area in an arcuate pattern, striking north, northeast, and east. The predominant vergence of thrust faults exposed elsewhere in the region, including the Belted Range and Specter Range thrusts, was to the east, southeast, and south. The vertical to overturned strata of the Striped Hills are hypothesized to result from successive stacking of three south-vergent thrust ramps, the lowest of which is the Specter Range thrust. The CP thrust is interpreted as a north-vergent backthrust that may have been roughly contemporaneous with the Belted Range and Specter Range thrusts. The southwest Nevada volcanic field consists predominantly of a series of silicic tuffs and lava flows ranging in age from 15 to 8 Ma. The map area is in the southwestern quadrant of the southwest Nevada volcanic field, just south of the Timber Mountain caldera complex. The Claim Canyon caldera, exposed in the northern part of the map area, contains thick deposits of the 12.7-Ma Tiva Canyon Tuff, along with widespread megabreccia deposits of similar age, and subordinate thick exposures of other 12.8- to 12.7-Ma Paintbrush Group rocks. An irregular, blocky fault array, which affects parts of the caldera and much of the nearby area, includes several large-displacement, steeply dipping faults that strike radially to the caldera and bound south-dipping blocks of volcanic rock. South and southeast of the Claim Canyon caldera, in the area that includes Yucca Mountain, the Neogene fault pattern is dominated by closely spaced, north-northwest- to north-northeast-striking normal faults that lie within a north-trending graben. This 20- to 25-km-wide graben includes Crater Flat, Yucca Mountain, and Fortymile Wash, and is bounded on the east by the 'gravity fault' and on the west by the Bare Mountain fault. Both of these faults separate Proterozoic and Paleozoic sedimentary rocks in their footwalls from Miocene volcanic rocks in their hanging walls. Stratigraphic and structural relations at Yucca Mountain demonstrate that block-bounding faults were active before and during eruption of the 12.8- to 12.7-Ma Paintbrush Group, and significant motion on these faults continued unt

IMAP↗

Geologic map of the Boulder-Fort Collins-Greeley area, Colorado

This digital map shows the geographic extent of rock stratigraphic units (formations) as compiled by Colton in 1976 under the Front Range Urban Corridor Geology Program. Colton used his own geologic mapping and previously published geologic maps to compile one map having a single classification of geologic units. The resulting published color paper map (USGS Map I-855-G, Colton, 1978) was intended for land-use planning and to depict the regional geology. In 1997-1999, another USGS project designed to address urban growth issues was undertaken. This project, the USGS Front Range Infrastructure Resources Project, undertook to digitize Colton's map at 1:100,000 scale, making it useable in Geographical Information Systems (GIS). That product is described here. In general, the digitized map depicts in its western part Precambrian igneous and metamorphic rocks, Pennsylvanian and younger sedimentary rock units, major faults, and brecciated zones along an eastern strip (5-20 km wide) of the Front Range. The central and eastern parts of the map (Colorado Piedmont) show a mantle of Quaternary unconsolidated deposits and interspersed outcrops of sedimentary rock of Cretaceous or Tertiary age. A surficial mantle of unconsolidated deposits of Quaternary age is differentiated and depicted as eolium (wind-blown sand and silt), alluvium (river gravel, sand, and silt of variable composition), colluvium, and a few landslide deposits. At the mountain front, north-trending, Paleozoic and Mesozoic formations of sandstone, shale, and minor limestone dip mostly eastward and form folds, fault blocks, hogbacks and intervening valleys. Local dikes and sills of Tertiary rhyodacite and basalt intrude rocks near the range front, mostly in the Boulder area.

Colorado↗

Aeromagnetic map of the West Clear Creek roadless area, Coconino and Yavapai Counties, Arizona

The West Clear Creek Roadless Area lies within the Coconino National Forest in central Arizona (fig. 1) and includes parts of Yavapai and Coconino Counties. Camp Verde, the nearest population center, is approximately 7 miles (11 km) west of the area. West Clear Creek canyon begins on the east at the confluence of the incised gorges of Willow Valley and of Clover Creek and is joined toward the west by Black Mountain Canyon. The canyon of West Clear Creek is very rugged; in several places it is more than 1,900 ft (580 m) deep. Creek elevation ranges from 6,100 ft (1,860 m) near the junction with Clover Creek to 3,200 ft (975 m) at the mouth of the canyon. The elevation of peaks and ridges near the canyon range from 4,000 ft (1,220 m) to 7,000 ft (2,135 m). Uplands at the head of Willow Valley and Clover Creek reach elevations up to 7,100 ft (2,165 m) above sea level. The greater part of the surface is underlain by late Tertiary volcanic rocks, mainly alkali olivine basalts. These overlie Lower Per i an sedimentary rocks consisting mostly of dolomite, limestone, and sandstone strata that dip gently westward. Late Tertiary and Quaternary sedimentary rocks and deposits mantle several ridges (terrace gravels) and cover basalt flows in Verde Valley at the west end of the area (Verde Formation). Quaternary alluvial deposits occur in the main West Clear Creek drainage and its larger tributaries at the west end of the area.

Arizona↗

Geologic map of the Clifton Quadrangle, Mesa County, Colorado

1:24,000-scale geologic mapping in the Clifton 7.5' quadrangle, in support of the USGS Colorado River/I-70 Corridor Cooperative Geologic Mapping Project, provides interpretations of the Quaternary stratigraphy and geologic hazards in this area of the Grand Valley. The Clifton 1:24,000 quadrangle is in Mesa County in western Colorado. Because the map area is dominated by various surficial deposits, the map depicts 16 different Quaternary units. Five prominent river terraces are present in the quadrangle containing gravels deposited by the Colorado River. The map area contains a large landslide deposit on the southern slopes of Mount Garfield. The landslide developed in the Mancos Shale and contains large blocks of the overlying Mesaverde Group. In addition, the landslide is a source of debris flows that have closed I-70 in the past. The major bedrock unit in the quadrangle is the Mancos Shale of Upper Cretaceous age. The map is accompanied by text containing unit descriptions, and sections on geologic hazards (including landslides, piping, gullying, expansive soils, and flooding), and economic geology (including sand and gravel). A table indicates what map units are susceptible to a given hazard. Approximately 20 references are cited at the end of the report.

Colorado↗

Geologic map of the Eagle Quadrangle, Eagle County, Colorado

The Eagle quadrangle covers an area that straddles the Eagle River and Interstate 70 (I-70) and it includes the town of Eagle, Colo., which is located in the southwestern part of the quadrangle, just south of I-70 and the Eagle River, about 37 km west of Vail, Colo. The map area is part of the I-70 urban corridor, which is experiencing rapid and escalating urban growth. Geologic mapping along this corridor is needed for ongoing land-use planning. A variety of rocks and deposits characterize the map area and areas nearby. Sedimentary rocks present in the map area range in age from Pennsylvanian rocks, which were deposited in the ancestral Eagle basin during the formation of the ancestral Rocky Mountains, to Late Cretaceous rocks that were deposited just prior to the formation of the present Rocky Mountains. The Pennsylvanian rocks in the map area include a thick sequence of evaporitic rocks (Eagle Valley Evaporite). These evaporitic rocks are commonly complexly folded throughout the southern part of the quadrangle where they are exposed. In general, in the central and northern parts of the quadrangle, the sedimentary rocks overlying the evaporite dip gently to moderately northward. Consequently, the youngest sedimentary rocks (Late Cretaceous rocks) are exposed dipping gently to the north in the northern part of the quadrangle; landslide complexes are widespread along the northerly dipping, dip slopes in shaly rocks of the Cretaceous sequence in the northeastern part of the map area. During the Early Miocene, basaltic volcanism formed extensive basaltic flows that mantled the previously deformed and eroded sedimentary rocks. Erosional remnants of the basaltic flows are preserved in the southeastern, west-central, and north-central parts of the map area. Some of these basaltic flows are faulted and downdropped in a manner that suggests they were downdropped in areas where large volumes of the underlying evaporitic rocks were removed from the subsurface, beneath the basaltic rocks, by dissolution or flowage of the evaporite in the subsurface. Quaternary and late Tertiary(?) surficial deposits in the map area consist mainly of Quaternary alluvium and colluvium, late and middle Pleistocene terrace gravels of the Eagle River, Miocene(?) gravel remnants of the ancestral Eagle River and its tributaries, and Pleistocene to recent mass movement deposits that include landslides and debris flows. Potential geologic hazards in the map area include landslides, debris flows, rockfalls, local flooding, ground subsidence, and expansive and corrosive soils.

Colorado↗

Geologic map of the Vail West quadrangle, Eagle County, Colorado

This new 1:24,000-scale geologic map of the Vail West 7.5' quadrangle, as part of the USGS Western Colorado I-70 Corridor Cooperative Geologic Mapping Project, provides new interpretations of the stratigraphy, structure, and geologic hazards in the area on the southwest flank of the Gore Range. Bedrock strata include Miocene tuffaceous sedimentary rocks, Mesozoic and upper Paleozoic sedimentary rocks, and undivided Early(?) Proterozoic metasedimentary and igneous rocks. Tuffaceous rocks are found in fault-tilted blocks. Only small outliers of the Dakota Sandstone, Morrison Formation, Entrada Sandstone, and Chinle Formation exist above the redbeds of the Permian-Pennsylvanian Maroon Formation and Pennsylvanian Minturn Formation, which were derived during erosion of the Ancestral Front Range east of the Gore fault zone. In the southwestern area of the map, the proximal Minturn facies change to distal Eagle Valley Formation and the Eagle Valley Evaporite basin facies. The Jacque Mountain Limestone Member, previously defined as the top of the Minturn Formation, cannot be traced to the facies change to the southwest. Abundant surficial deposits include Pinedale and Bull Lake Tills, periglacial deposits, earth-flow deposits, common diamicton deposits, common Quaternary landslide deposits, and an extensive, possibly late Pliocene landslide deposit. Landscaping has so extensively modified the land surface in the town of Vail that a modified land-surface unit was created to represent the surface unit. Laramide movement renewed activity along the Gore fault zone, producing a series of northwest-trending open anticlines and synclines in Paleozoic and Mesozoic strata, parallel to the trend of the fault zone. Tertiary down-to-the-northeast normal faults are evident and are parallel to similar faults in both the Gore Range and the Blue River valley to the northeast; presumably these are related to extensional deformation that occurred during formation of the northern end of the Rio Grande rift system in Colorado. In the southwestern part of the map area, a diapiric(?) exposure of the Eagle Valley Evaporite exists and chaotic faults and folds suggest extensive dissolution and collapse of overlying bedrock, indicating the presence of a geologic hazard. Quaternary landslides are common and indicate that landslide hazards are widespread in the area, particularly where old slide deposits are disturbed by construction. The late Pliocene(?) landslide that consists largely of a smectitic upper Morrison Formation matrix and boulders of Dakota Sandstone is readily reactivated. Debris flows are likely to invade low-standing areas within the towns of Vail and West Vail where tributaries of Gore Creek issue from the mountains on the north side of the valley.

Miscellaneous Field Studies Map↗