SEARCH · USGS Science

Results for “Mineral Economics”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 865 records · Page 48Linked to original sources

USGS1994

Evolution of volcanic rocks and associated ore deposits in the Marysvale volcanic field, Utah

A geological account on the igneous activity and associated mineral deposition in the volcanic field of Marysvale in Utah is presented. Three episodes (34-22 Ma, 22-14 Ma and 9-5 Ma) involved in the volcanic rock eruption and associated mineralization are described. The first episode is believed to have occurred during the time of tectonic convergence when two contrasting suites of rocks, Mount Dutton Formation and Bullion Canyon Volcanics, erupted concurrently. Mineralization during this period was sparse. In the second episode, change from intermediate to bimodal volcanism occurred. During the third episode, basaltic compositions did not change. Although major element constituent had rhyolites similar to that of the second episode, rhyolites had a marked radiogenic isotope characteristic difference.

Utah↗

USGS1985

Undiscovered phosphate resources in the Caribbean region and their potential value for agricultural development

The countries of the world's humid tropical regions lack the soil fertility necessary for high agricultural productivity. A recently developed agricultural technology that increases soil fertility can make tropical agriculture highly productive, but the technique requires large inputs into the soil of phosphorus and other fertilizers and soil amendments. Use of fertilizers derived from phosphate rock is increasing greatly throughout the world, and fertilizer raw materials are being produced more and more frequently from phosphate rock deposits close to the areas of use. An increased understanding of the origin of phosphate rock in ancient oceans has enabled exploration geologists to target areas of potential mineral resource value and to search directly for deposits. However, because of the difficulty of prospecting for mineral deposits in forested tropical regions, phosphate rock deposits are not being explored for in the countries of the humid tropics, including most countries of the Caribbean region. As a result, the countries of the Caribbean must import phosphate rock or phosphorus fertilizer products. In the present trade market, imports of phosphate are too low for the initiation of new agricultural technology in the Caribbean and Central American region. A newly proposed program of discovery and development of undiscovered phosphate rock deposits revolves around reconnaissance studies, prospecting by core drilling, and analysis of bulk samples. The program should increase the chance of discovering economic phosphate rock deposits. The search for and evaluation of phosphate rock resources in the countries of the Caribbean region would take about 5 years and cost an average of $15 million per country. The program is designed to begin with high risk-low cost steps and end with low risk-high cost steps. A successful program could improve the foreign exchange positions of countries in the Caribbean region by adding earnings from agricultural product exports and by substituting domestically produced phosphate rock and fertilizer products for imported phosphate fertilizers. A successful program also could provide enough domestically produced phosphorus fertilizer products to allow initiation of new agricultural technology in the region and thus increase domestic food production. Finally, a new phosphorus fertilizer industry would create new jobs in the mining, chemical, and transportation industries of the Caribbean region.

Circular↗

USGS1994

Environmental geology of the Summitville mine, Colorado

Although altered and mineralized rocks at Summitville mine in Colorado contain minimal amount of sulfide minerals, acid mine problems existed primarily because of the pervasive alteration of the surrounding rocks, through hydrothermal process, to highly siliceous and argillized rocks that are incapable of buffering acidic waters during weathering. The problems are compounded by the continued exposure of altered and mineralized rocks in open pit, heap leach pad and waste piles to oxygenated waters. Inadequate subsurface structural control and underground mine workings also greatly affect water quality and the location of acid mine drainage output. It is expected that with these initial results, geological studies on constrained acid-generation from ore and altered rocks will be pursued.

Economic Geology↗

USGS1990

Sulfur isotope studies of the Stillwater Complex and associated rocks, Montana

The Stillwater Complex in south-central Montana is a late Archean layered, ultramafic to mafic intrusion emplaced into middle to late Archean metagraywacke, metashale, and ironformation. Sulfide minerals are concentrated near the base of the intrusion in some chromitite layers, podiform pegmatoids, discontinuous discordant pods or pipes, and numerous thin, stratiform layers. This investigation focuses on the isotopic composition of sulfur in metamorphosed sedimentary rocks, Stillwater-associated sills and dikes, sulfide accumulations near the base of the complex, and platinum-group element-enriched sulfide mineralization that constitutes the J-M reef and the Picket Pin deposit.The delta 34 S values for 233 samples analyzed in this study have a mean of 0.4 per mil, a standard deviation of 1.7, and a maximum and minimum of-3.8 and 7.8 per mil, respectively. Despite the very narrow range of values, analysis of variance calculations confirms that the data comprise three statistically distinct groups. These groups are (1) metagraywackes and metashales (mean = 2.8ppm); (2) iron-formation, Stillwater-associated sills and dikes, and basal sulfide accumulations in the complex (mean = -0.7ppm); and (3) disseminated sulfide minerals that occur above the basal accumulations in the Stillwater Complex (mean -- 1.2ppm). The isotopic composition of sulfur in the basal sulfide accumulations indicates that assimilation of substantial amounts of sulfur from iron-formation may have occurred. The low tenor of the basal sulfide ores is also consistent with assimilation of sulfur into a limited volume of magma near the base of the intrusion.

Economic Geology↗

USGS1981

Preliminary report on geophysics ground follow-up of the 1977 airborne survey in the Wadi Bidah District, Kingdom of Saudi Arabia

Reconnaissance geologic and geochemical sampling was made during the 1978 field season at most of the 50 or so electromagnetic anomalies detected in the 1977 airborne electromagnetic (AEM) survey of the Wadi Bidah district. These Phase 1 studies also included reconnaissance geophysical traverses of nine of the AEM conductors. In addition the AEM anomalies were classified on the basis of this reconnaissance work into a list of priority targets for use in economic studies, and six AEM anomalies were selected for further studies. During Phase 2 conducted in the 1979 field season, ground geophysical work consisting of electromagnetic (EM), self-potential (SP), and selected magnetic surveys were carried out in the six targets selected in the Phase 1 studies. These target areas in aggregate cover about 30 km 2, and are approximately half of the Wadi Bidah Class 1 and Class 2 priority targets found during the 1977 airborne electromagnetic (AEM) survey of parts of the Arabian Shield. The results indicate possible extension of known reserves at the Rabathan area (AEM anomaly B-29), with possible potential for mineralization in the area extending 15-20 km north (anomaly B-13), where the geologic and geophysical environment is similar. An important observation is that mineralization in the B-29 (Rabathan) zone is coincident with narrow SP anomalies superimposed on the larger, broader, and more formational-type SP anomalies encountered in both areas B-29 and B-13. AEM anomaly B-25-26 areahas geophysical characteristics that show in the groundwork and that make it an attractive drill target. EM and SP anomalies are associated, in part, with magnetic anomalies and with exposures of significant limonitic gossan. Wadi al Khadra prospect, not included in the 1977 AEM survey, and the AEM anomaly B-25-26 area were also high-mineralization-potential products of the Phase 2 studies. Target area B-35 remains an unknown quantity, and AEM anomaly B-24 is almost certainly due to a carbonaceous schist. Geochemical results, along with detailed geologic mapping and the geophysical data, indicate several potential mineralized targets. Further detailed geophysics (EM and SP) will assist in understanding the geophysical data thus far collected. Further ground follow-up studies are recommended.

Open-File Report↗

USGS1962

The origin of jasperoid in limestone

The name jasperoid has been applied to rocks that consist mainly of silica and that have formed by replacement. This paper considers only those jasperoids formed by replacement of limestone . Major problems involved in the origin of such jasperoid include: source of the silica; nature of solutions that dissolve, transport, and precipitate silica; and the mechanism of replacement of limestone by silica. The answers to these problems are of practical as well as scientific interest because many jasperoid bodies are closely related to mineralization. Silica may be derived from: juvenile silica of magmatic origin ; silica leached from underlying rocks by hydrothermal solutions; silica locally derived from enclosing rocks by circulating solutions; and silica carried downward in ground water from the weathering of overlying rocks. The nature and the concentration of other substances in solutions influence, in a complex manner, the ability of these solutions to dissolve, transport, and precipitate silica. Nevertheless, the following generalizations can be made. The solubility and rate of solution of silica in water at moderate pressure increase slowly with temperature up to 200 degrees C.; from 200 degrees to 360 degrees C. they increase rapidly; above 360 degrees C. solubility is pressure dependent, increasing steadily at high pressure and decreasing slightly at moderate pressure due to the formation of a vapor phase. The pH has slight effect on the ionic solubility of silica in the range from pH 1 to ph 9 at low temperature. The effect of other components on the solubility of silica is probably subordinate to that of temperature above 200 degrees C., but becomes increasingly important as the temperature falls below that point. Most jasperoid bodies form by both replacement and silica deposition in voids, with replacement dominant during the early phase, and precipitation dominant during later phases. Replacement of limestone by silica is favored by relatively low temperature acid solutions, and the presence of CO 2 . As limestone dissolves, Ca ions are released to promote the precipitation of colloidal silica. Acid solutions then diffuse through this gelatinous film to continue dissolving limestone behind it; the Ca ions diffusing outward cause the precipitation of more colloidal silica at the solution-gel interface. As the gel mass ages, it shrinks, hardens, and ruptures. More silica is then deposited in the fractures. Eventually the gel crystallizes to a dense mass of aphanitic quartz and chalcedony, with shrinkage cracks and vugs filled or coated with younger coarse-grained quartz and other minerals that have been deposited directly from solution. The theory that relatively low temperature favors the formation of jasperoid replacement bodies in carbonate rocks, and high temperature inhibits their formation, offers an explanation for the gap that is observed in some districts between contact metasomatic lime silicates and siliceous replacement of limestone . This gap is characterized by the lack of any reaction between limestone and silica-bearing solutions moving through it.

Economic Geology↗

USGS1993

Geochronology of the Sleeper deposit, Humboldt County, Nevada: Epithermal gold-silver mineralization following emplacement of a silicic flow-dome complex

The high-grade gold-silver deposits at the Sleeper mine are low sulfidation, quartz-adularia-type epithermal deposits, formed during the final stages of igneous hydrothermal activity of a small middle Miocene silicic flow-dome complex in north-central Nevada. Potassiumargon and 40 Ar/ 39 Ar ages of alkali feldspar indicate that the rhyolitic flow-dome complex was emplaced before about 16.5 Ma; hydrothermal alteration and mineralization followed, lasting from about 16.2 to 14+ Ma based on ages of adularia associated with electrum. There were multiple pulses of alteration and mineralization but all occurred within a period of less than 2 m.y. Later supergene alteration formed opal and alunite about 5.4 Ma but produced no Au or Ag mineralization other than some remobilization to produce locally rich pockets of secondary Au and Ag enrichment and is unrelated to the older magmatic hydrothermal system. The Sleeper deposit in the northern part of the Great Basin is genetically related to bimodal volcanism that followed a long period of arc-related andesitic volcanism in the same general region.

Economic Geology↗

USGS2014

Quantifying and valuing ecosystem services: An application of ARIES to the San Pedro River basin, USA

A large body of research exists that identifies and values ecosystem services - the benefits that ecosystems provide to humans (MA, 2005) - and their underlying ecological processes. However, the development of software decision support tools that integrate ecology, economics and geography that can be independently used within the public, private, academic and NGO sectors is a more recent phenomenon (Ruhl et al., 2007; Daily et al., 2009). Spurred by growing demand for more sophisticated analysis of the social and economic consequences of land management decisions, the US Department of Interior - Bureau of Land Management (BLM) launched a pilot project with the US Geological Survey (USGS) to assess the usefulness and feasibility of ecosystem service assessment and valuation tools to provide inputs to decision-making. The project analysed ecosystem services in the US portion of the San Pedro River watershed, which includes the BLM-managed San Pedro Riparian National Conservation Area (SPRNCA), to improve the understanding of complex social and ecological relationships that transcend administrative divisions. The BLM manages some 99 million hectares, primarily in the western United States, and 283 million hectares of sub-surface mineral estate. BLM's multiple-use mission requires that it appropriately balance non-extractive uses such as habitat conservation, recreation and archaeological heritage protection and the extractive use of resources such as timber, oil and gas, coal, uranium, and other minerals.

Arizona↗

USGS1968

Ground-water geology of Kordofan Province, Sudan

For much of Kordofan Province, surface-water supplies collected and stored in hafirs, fulas, and tebeldi trees are almost completely appropriated for present needs, and water from wells must serve as the base for future economic and cultural development. This report describes the results of a reconnaissance hydrogeologic investigation of the Province and the nature and distribution of the ground-water resources with respect to their availability for development. Kordofan Province, in central Sudan, lies within the White Nile-Nile River drainage basin. The land surface is largely a plain of low relief; jebels (hills) occur sporadically, and sandy soils are common in most areas except in the south where clayey soils predominate. Seasonal rainfall, ranging from less than 100 millimeters in the north to about 800 millimeters in the south, occurs almost entirely during the summer months, but little runoff ever reaches the Nile or White Nile Rivers. The rocks beneath the surficial depsits (Pleistocene to Recent) in the Province comprise the basement complex (Precambrian), Nawa Series (upper Paleozoic), Nubian Series (Mesozoic), laterite (lower to middle Tertiary), and the Umm Ruwaba Series (Pliocene to Pleistocene). Perennial ground-water supplies in the Province are found chiefly in five hydrologic units, each having distinct geologic or hydrologic characteristics. These units occur in Nubian or Umm Ruwaba strata or both, and the sandstone and conglomerate beds form the :principal aquifers. The water is generally under slight artesian head, and the upper surface of the zone of saturation ranges from about 50 meters to 160 meters below land surface. The surficial deposits and basement rocks are generally poor sources of ground water in most of the Province. Supplies from such sources are commonly temporary and may dissipate entirely during the dry season. Locally, however, perennial supplies are obtained from the surficial deposits and from the basement rocks. Generally, water from Nubian aquifers is satisfactory for most uses and is of better quality than that obtained from Umm Ruwaba aquifers. The relatively high mineralization of water from the Umm Ruwaba, especially in the eastern part of the Province, makes the water unsuitable for many municipal ad industrial uses. The water is generally usable, however, for domestic and livestock purposes. Some 175 drilled wells located at 75 water yards yield an average, of about 1,000 imperial gallons .per hour per well from Nubian or Umm Ruwaba. aquifers. Generally the water yards provide sufficient water for minimum domestic and livestock requirements throughout the year. Commonly, however, the water yards are widely separated and, hence, not always properly spaced for good range management or for serving the needs of the dispersed rural population. In 1962, withdrawals from Nubian and Umm Ruwaba aquifers in the Province were approximately 600 million gallons annually. This rate of draft: could probably be continued almost indefinitely without significant depletion of the water supply. Nubian and Umm Ruwaba aquifers in the southwestern part of Kordofan offer excellent potential for future development. Nubian aquifers in northern Kordofan need extensive exploration by test drilling before their economic potential can be properly evaluated.

Water Supply Paper↗

USGS1983

The mobility and distribution of heavy metals during the formation of first cycle red beds

Holocene-Pliocene sequence sampled in northern Baja California. Geochemical data supported by petrographic, X-ray, and SEM observations of mineralogical transformations, fission-track radiography, and uranium decay series measurements. Results indicate that metal content of the studied samples is inherited from constituent detrital minerals and that reddening of whole-rock samples does not promote major open-system migration of heavy metals. The amount of secondary iron oxides and the fraction of whole-rock metals associated with the oxides increase during red-bed development. Results suggest that developed red beds which are well flushed by suitable pore fluids may be sources of significant quantities of heavy metals.

Economic Geology↗

USGS2017

Use of raw materials in the United States from 1900 through 2014

The economic growth of an industrialized nation such as the United States requires raw materials for construction (buildings, bridges, highways, and so forth), defense, and processing and manufacture of goods and services. Since the beginning of the 20th century, the types and quantities of raw materials used have increased and changed significantly. This fact sheet quantifies the amounts of raw materials (other than food and fuel) that have been used in the U.S. economy annually for a period of 115 years, from 1900 through 2014. It provides a broad overview of the quantity (weight) of nonfood and nonfuel materials used in the economy and illustrates the use and significance of raw nonfuel minerals in particular as building blocks of society. These data have been compiled to help the public and policymakers understand the changing annual flow of raw materials put into use in the United States. Such information can be helpful in assessing the potential effects of materials use on the environment, assessing materials’ intensity of use, and examining the role that these materials play in the economy. The data presented indicate the substitution and shift in materials usage from renewable to nonrenewable materials during the 20th century. The disaggregated quantities by commodity (not shown in this fact sheet) may be tested against supply adequacy and end of life issues.

Fact Sheet↗

USGS1932

Geology and ore deposits of the Pioche district, Nevada

LOCATION AND SURFACE FEATURES The Bristol Range, Highland, and Ely Range quadrangles make up the larger part of a. rectangular area 35 miles north and south by 24 miles east and west, which lies 19 miles west of the Nevada-Utah line and about 250 miles southwest of Salt Lake City. The district lies within the Great Basin, a semiarid region of alternating mountain ranges and intermontane plains floored largely by outwash from the mountains. The plain, which slopes away from the ranges, stands between 4,700 and 6,000 feet above the sea. The Bristol and Highland Ranges, which are separated only by a low gap, form an almost continuous north-south range that rises about 2,500 feet above the highest part of the surrounding plain, to general altitudes of 8,000 to 9,000 feet, though the highest point, Highland Peak, reaches 9,395 feet. A lower range, the Ely Range, with a northwesterly trend, lies farther east and nearly in touch with the Bristol-Highland Range. The town of Pioche lies midway on the. eastern foot of the Ely Range. ROOKS OF THE PIOOHB REGION The rocks of the ranges are Paleozoic sediments, Tertiary (?) lavas and intrusive rocks, and Pliocene (?) tuffs. The Paleozoic sediments have a total thickness of nearly 18,000 feet. Over 8,000 feet of the Cambrian has been measured without reaching its base. The lowest Cambrian formation is a quartzite, of which only the upper 1,500 feet is exposed, and this is followed by 1,200 feet of shale, 400 feet of limestone, aoid 150 feet of shale. Above this second shale the upper three-fourths of the Cambrian consists of limestone and dolomitic limestone. It is in the quartzite and in the limestone interbedded in and bounding the shales that the main ore bodies of the district have been found. Above the Cambrian comes 1,795 feet of Ordovician limestone, with some interbedded dolomite and with a 50-foot quartzite a, third of the way down from the top; 75 feet of Silurian dolomite; 3,000 feet of Middle Devonian dolomite with thin interbedded quartzite near the top, followed by 550 feet of Upper Devonian limestone; 3,775 feet of Mississippian limestone with a heavy quartzitic sandstone just below the middle; then, at the top of the series, 700 feet of Pennsylvania n limestone. The Paleozoic formations are tilted, bent, and faulted, but sharp folding is extremely rare. Dips between 10° and 30° are common, but there are few greater than 40°. The rocks are cut by many large and innumerable small normal faults, which in many parts of the area are difficult to recognize because they cut thick formations of similar rocks. A large thrust fault occurs along the west side of the Bristol-Highland Range. A thick series of lavas with interbedded tuffs lies along the flanks of the ranges and makes up a large part of the hilly northwest corner of the Bristol quadrangle. The lavas lie unconformably on the Paleozoic sediments and consist mainly of dacite, latite, and andesite, with some basalt and a little rhyolite. About 6,000 feet of lavas and tuffs were measured in Condor Canyon, near the south end of the Ely Range. The age of the lavas is not sharply fixed; they may be early Tertiary or even late Mesozoic. It is not unlikely that they are the result of volcanic action extending over a long period. The lavas are tilted and faulted, though their average dip is less than that of the Paleozoic sediments. At Blind Mountain, on the west side of the Bristol Range, stocks of quartz monzonite and dikes of similar composition cut an infaulted block consisting of sediments, chiefly Devonian, and lavas. Both the sediments and the lavas are metamorphosed, and a belt of marked metamorphism extends south along the west base of the Bristol-Highland Range for several miles. The quartz porphyry dikes of the region, including those near Pioche, are believed to have come in at the same time. The plain west of the Bristol-Highland Range is a. valley of interior drainage floored with outwash from the mountains, coarser near the range but finer and making a clay flat along the west side of the Bristol Range and Highland quadrangles. The valley east of the Bristol-Highland Range, however, has outside drainage by way of Meadow Valley to the Virgin and Colorado Rivers. The stream in upper Meadow Valley and its tributaries have cut through the surface wash from the mountains and laid bare several hundred feet of white, yellow, and red water-laid Pliocene tuffs that lie in nearly the position in which they were laid down. This erosion has developed a striking badland topography in the Pliocene beds. HISTORICAL SUMMARY The general succession of events may be summarized as follows: 1. Sedimentation during most of Paleozoic time from Cambrian to Pennsylvanian. 2. Uplift, slight warping, and erosion. 3. Volcanism of perhaps late Mesozoic or early Tertiary time, producing lavas and tuffs. This period of volcanism may have lasted a long time and spanned one or more of the epochs of faulting. 4. Tilting and normal faulting. 5. Thrust faulting. 6. Quartz monzonite intrusions at Blind Mountain. 7. Normal block faulting of the Basin Range type. 8. Erosion of the faulted blocks to maturity and to essen-. tially the topography of to-day. 9. Outbursts of volcanic ash, probably in late Pliocene time, and the deposition of several hundred feet of water-laid tuffs in the valleys. 10. In Meadow Valley, valley cutting, which has produced a badland topography in the soft Pliocene tuffs and canyons where the streams cross the harder Paleozoic limestones. ECONOMIC GEOLOGY The Pioche district during four years in the early seventies was second only to the Comstock district in output of silver. The bonanza ore of those stirring times came from fissure veins in the Prospect Mountain quartzite, of Lower Cambrian age. In recent years the main interest has shifted to the bedded replacement deposits of silver-bearing lead-zinc sulphide ore occurring in the limestone members of the Pioche shale a type of ore body which was discovered accidentally during the prospecting of the fissure veins. The ore deposits of the district comprise three groups (1) silver-bearing fissure veins in quartzite; (2) silver-bearing mineralized granite porphyry; (3) replacement deposits in limestone and dolomite. All of them appear to have been formed at about the same time, in the epoch of mineralization that occurred shortly after the intrusion of the granitic rocks and their allied dikes of granite porphyry and lamprophyre. The entire present output of the district is coming from the replacement deposits in limestone and dolomite, but exploratory work is still in progress on the fissure veins and mineralized porphyry. The replacement deposits include both replacement fissure veins and stratiform ("bedded") replacement deposits. The replacement fissure veins dip steeply and cut across the bedding of the carbonate rocks in which they are inclosed. They are thoroughly oxidized, as deep at least as 1,100 feet, for on none of them have the mine workings penetrated to water level, and they are highly manganiferous and limonitic and low in silica. At-certain horizons stratiform replacement deposits extend out as lateral branches from the fissure veins. Deposits of this kind occur mainly in the Mendha limestone, Highland Peak limestone, and Lyndon limestone. The stratigraphic range is therefore at least 5,500 feet, and as some of the fissure veins extend down through the underlying Pioche shale the indicated range may exceed 6,500 feet. The most notable representatives of the replacement fissure veins are at the Bristol mine, where they yield silver-bearing copper-leadzinc ores. So far unique among the ore bodies of the district is the pipe of wad and pyrolusite ore at the Jackrabbit mine, the periphery of the pipe consisting of a girdle of extraordinarily coarse white calcite spar produced by the recrystallization of the surrounding limestones. The stratiform replacement deposits that are attracting most attention occur at the intersections of steep fissures with the limestone members of the Pioche shale. In recent years the " bedded " ore of the Combined Metals mine has been of main interest. The ore is essentially a.n intimate intergrowth of pyrite, sphalerite, and galena. Although above water level, the ore is unoxidized. It extends on both sides of the mineralizing fissure as far as 100 feet. At the Prince mine ore beds were formed at seven successively higher horizons in the Pioche shale and the overlying Lyndon and Highland Peak limestones. The ore " beds " above water level in the Prince mine are thoroughly oxidized and consist of manganese-iron oxides low in silver, lead, and zinc. About 800,000 tons of ore carrying 2.5 to 3 ounces of silver to the ton, 3 per cent of lead, 35 per cent of iron, and 15 per cent of manganese has been shipped. The Prince mine was in 1915-1918 the premier producer of lead in Nevada. The ore " bed " that occurs here below water level consists of sphalerite, galena, and pyrite in a gangue of manganosiderite and minor quartz. This is the only locality in the district in which the primary source of the abundant oxidized manganese minerals (wad, pyrolusite, and braunite) has so far been found. Some of the stratiform ore bodies the ore beds, as they are locally called were formed adjacent to exceedingly insignificant-looking fissures; and this dependence on inconspicuous mineralizing fissures is beyond doubt one of the most impressive features in the geology of the district. It opens the possibility that there may be many other bedded deposits which, like the Combined Metals ore bed, do not crop out. To find these ore bodies will be difficult, but their discovery will be aided primarily by applying skillfully a knowledge of the geologic column and by determining the faulting that has disturbed or changed the normal sequence of the strata.

Nevada↗

USGS1993

Small fields in the National Oil and Gas Assessment

In the 1989 National Oil and Gas Assessment prepared by the U.S. Geological Survey (USGS) and the Minerals Management Service, undiscovered oil and gas resources in small fields were assessed separately from resources in fields containing more than 1 million bbl of oil equivalent. This paper concerns the USGS Part of the study: onshore and state waters in the conterminous United States. After the resources in small fields were assessed by geologists, statistical techniques were used to allocate these resources to field-size distributions at the province level. The total numbers of small fields remaining to be discovered is estimated at about 77,800. They account for about 10.6 billion bbl of oil equivalent or 20% of the undiscovered resources in the conterminous United st tes. When an economic analysis was applied to the small fields, none of the offshore small fields were estimated to be commercially developable. For the onshore study area, about 52% of the small oil fields and 46% of the small gas fields are commercially developable. Overall, because more hydrocarbons are contained in the larger size classes of the small fields, about 70% of the undiscovered resources in small fields is expected to be commercially developable.

American Association of Petroleum Geologists Bulle↗

USGS2017

Manganese

Manganese is an essential element for modern industrial societies. Its principal use is in steelmaking, where it serves as a purifying agent in iron-ore refining and as an alloy that converts iron into steel. Although the amount of manganese consumed to make a ton of steel is small, ranging from 6 to 9 kilograms, it is an irreplaceable component in the production of this fundamental material. The United States has been totally reliant on imports of manganese for many decades and will continue to be so for at least the near future. There are no domestic reserves, and although some large low-grade resources are known, they are far inferior to manganese ores readily available on the international market. World reserves of manganese are about 630 million metric tons, and annual global consumption is about 16 million metric tons. Current reserves are adequate to meet global demand for several decades. Global resources in traditional land-based deposits, including both reserves and rocks sufficiently enriched in manganese to be ores in the future, are much larger, at about 17 billion metric tons. Manganese resources in seabed deposits of ferromanganese nodules and crusts are larger than those on land and have not been fully quantified. No production from seabed deposits has yet been done, but current research and development activities are substantial and may bring parts of these seabed resources into production in the future. The advent of economically successful seabed mining could substantially alter the current scenario of manganese supply by providing a large new source of manganese in addition to traditional land-based deposits. From a purely geologic perspective, there is no global shortage of proven ores and potential new ores that could be developed from the vast tonnage of identified resources. Reserves and resources are very unevenly distributed, however. The Kalahari manganese district in South Africa contains 70 percent of the world’s identified resources and about 25 percent of its reserves. South Africa, Brazil, and Ukraine together accounted for nearly 65 percent of reserves in 2013. The combination of total import reliance for manganese, the mineral commodity’s essential uses in our industrialized society, and the potential for supply disruptions because of the limited sources of the ore makes manganese among the most critical minerals for the United States. Manganese is the 12th most abundant element in Earth’s crust. Its concentration varies among common types of rocks, mostly in the range of from 0.1 to 0.2 percent. The highest quality manganese ores contain from 40 to 45 percent manganese. The formation of these ores requires specialized geologic conditions that concentrate manganese at several hundred times its average crustal abundance. The dominant processes in forming the world’s principal deposits take place in the oceans. As a result, most important manganese deposits occur in ancient marine sedimentary rocks that are now exposed on continents as a result of subsequent tectonic uplift and erosion. In many cases, other processes have further enriched these manganiferous sedimentary rocks to form some of today’s highest grade ores. Modern seabed resources of ferromanganese nodules cover vast areas of the present ocean floor and are still forming by complex interactions of marine microorganisms, manganese dissolved in seawater, and chemical processes on the seabed. Manganese is ubiquitous in soil, water, and air. It occurs most often in solid form but can become soluble under acidic conditions. Manganese mining, like any activity that disturbs large areas of Earth’s surface, has the potential to produce increases in manganese concentrations that could be harmful to humans or the environment if not properly controlled. Although manganese is an essential nutrient for humans and most other organisms, overexposure can lead to neurotoxicity in humans. Workers at manganese mining and processing facilities have the greatest potential to inhale manganese-rich dust. Without proper protective equipment, these workers may develop a permanent neurological disorder known as manganism. Each manganese mine is unique and presents its own suite of potential hazards and preventative measures. Likewise, various nations have their own sets of standards to ensure safe mining, isolation of mine waste, treatment of mine waters, and mine closure and restoration. Interest in mining trace metals contained in ferromanganese nodules and crusts on the seabed has increased rapidly in the past decade. Prime areas for future research include overcoming the technological challenges presented by mining as deep as 6,500 meters below sea level and understanding and mitigating the potential impacts of seabed mining on marine ecosystems.

Professional Paper↗

USGS1976

Water resources of Lincoln County coastal area, Oregon

The Lincoln County coastal area is underlain by Tertiary volcanic and sedimentary rocks of low permeability that store only a small volume of the annual precipitation which averages 68 inches (1,730 millimeters). Consequently, the Tertiary units yield small quantities of water to wells and furnish little ground-water discharge to maintain the base flow of streams. Although streamflow is normally abundant during the wet season, flow decreases greatly during summer when needed most. Quaternary marine terrace deposits of semiconsolidated sand border the western part of the area and are the most productive aquifers. Several wells drilled into the Quaternary deposits are among the highest producing wells of the area, with yields of 25 to 60 gallons per minute (1.6 to 3.8 liters per second). The Siletz River Volcanics is one of the better aquifers in the area and generally yields water in volumes sufficient for domestic use. The average well drilled into these rocks yields 5 to 10 gallons per minute (0.3 to 0.6 liters per second). Locally, this formation is quite permeable and has a producing well in the study area, with a yield of 120 gallons per minute (7.6 liters per second). Other volcanic rocks of small areal extent and largely untested, are the basalts near Depoe Bay, Cape Foulweather, Yachats, and Cape Perpetua. Wells drilled in January 1976 near Depoe Bay indicate that as much as 125 gal/min (10 L/s) of water can be obtained from wells drilled into the basalt. Tertiary marine sedimentary rocks of siltstone and sandstone are widespread throughout the area. Yields of wells drilled in these rocks are generally low (less than 5 gallons per minute, or 0.3 liters per second), and many wells in these formations produce no usable quantities of ground water. Approximately 5,000,000 acre-feet (6,000 cubic hectometers) of water discharges annually into the Pacific Ocean from all streams along the Lincoln County coast. About 85 percent of the annual streamflow occurs from November through April. Minimum streamflaws occur from August through October when, at times, as little as 450 acre-feet (55 hectometers) per day flows from all streams. Most of the ground water, with the exception of water from some wells drilled in the marine siltstone and sandstone, contains relatively small concentrations of dissolved minerals. Wells that tap the marine deposits at low altitudes have high concentrations of dissolved minerals, particularly sodium and chloride. In general, analyses of water from the 14 streams sampled in Lincoln County show very good chemical quality. The iron content of Depoe and Thiel Creeks is above the Environmental Protection Agency's recommended limit of 0.3 milligrams per liter for drinking water. Annual water use totals 6.7 billion gallons, which is less than 0.5 percent of runoff. About 70 percent of the use is for industrial purposes at one lumber products mill, about 25 percent is for public supplies, and less than 5 percent for irrigation. Water supplies for all municipalities in Lincoln County currently (1975) are obtained from surface-water sources. Because of rapid economic development of the coastal area, it is expected that additional water will be needed in the future. Additional water can be supplied (1) by reservoirs on major streams; (2) by the expansion, in some locations, of present surface-water facilities on small streams; and (3) locally, by an additional small volume of supplemental water from ground-water sources.

Oregon↗

USGS1961

Sulfide ores formed from sulfide-deficient solutions 1

Assuming that many hydrothermal ore deposits are formed from emanations given off from a magma at depth while it cools through the interval in which latent heat of crystallization is generated, it is shown that this cooling interval for magmatic bodies of moderate size must be measured in tens or hundreds of thousands of years. Emanations from such a magma should change at the source with time: relatively insoluble volatiles should depart early and the more soluble ones late; the general order is probably sulfur gases and oxides of carbon, water, chlorides, and fluorides. Experimental and field evidence indicates that this order approximates the increasing solubility of these gases in natural magmas. Theoretical considerations show that within a hydrothermal conduit a relatively small gradient would soon be established between the magma and the surface. A small gradient suggests that temperature drop is a minor factor in precipitating substances in solution , whereas a drop in pressure and reaction with wall rocks or with material precipitated from earlier emanations would be of major importance. The sulfur-rich early emanations tend to react with indigenous iron of the country rock, or with iron carried by carbon dioxide-rich solutions to where a marked pressure drop occurs; either of these reactions will form abundant early iron sulfide . Later sulfur-deficient emanations, which then carry soluble halides of ore metals, react with this early iron sulfide to precipitate the ore mineral sulfides by replacement and deposition with loss of iron to the solution . Precipitation of much sulfide ore is thus commonly accomplished by sulfur that was fixed near the site of the ore body by earlier emanations from the magmatic source; a large amount of ore , however, may be precipitated from late-stage magmatic solutions where they mingle with early-stage sulfur-bearing solutions from a different magmatic source.

Economic Geology↗

USGS2003

Origin of high-grade gold ore, source of ore fluid components, and genesis of the Meikle and neighboring Carlin-type deposits, Northern Carlin Trend, Nevada

The Meikle mine exploits one of the world’s highest grade Carlin-type gold deposits with reserves of ca. 220 t gold at an average grade of 24.7 g/t. Locally, gold grades exceed 400 g/t. Several geologic events converged at Meikle to create these spectacular gold grades. Prior to mineralization, a Devonian hydrothermal system altered the Bootstrap limestone to Fe-rich dolomite. Subsequently the rocks were brecciated by faulting and Late Jurassic intrusive activity. The resulting permeability focused flow of late Eocene Carlin-type ore fluids and allowed them to react with the Fe-rich dolomite. Fluid inclusion data and mineral assemblages indicate that these fluids were hot (ca. 220°C),of moderate salinity (<6 wt % NaCl equiv), acidic, and H 2 S rich. Gold-rich pyrite formed by dissolution of dolomite and sulfidation of its contained Fe. Where dissolution and replacement were complete, ore-stage pyrite and other insoluble minerals were all that remained. Locally, these minerals accumulated as internal sediments in dissolution cavities to form ore with gold grades >400 g/t. Petrographic observations, geochemical data, and stable isotope results from the Meikle mine and other deposits at the Goldstrike mine place important constraints on genetic models for Meikle and other Carlin-type gold deposits on the northern Carlin trend. The ore fluids were meteoric water ( δ D = –135‰, δ 18 O = –5‰) that interacted with sedimentary rocks at a water/rock ratio of ca. 1 and temperatures of ca. 220°C. The absence of significant silicification suggests that there was little cooling of the ore fluids during mineralization. These two observations strongly suggest that ore fluids were not derived from deep sources but instead flowed parallel to isotherms. The gold was transported by H 2 S ( δ 34 S = 9‰), which was derived from Paleozoic sedimentary rocks. The presence of auriferous sedimentary exhalative mineralization in the local stratigraphic sequence raises the possibility that preexisting concentrations of gold contributed to the Carlin-type deposits. Taken together our observations suggest that meteoric water evolved to become an ore fluid by shallow circulation through previously gold- and sulfur-enriched rocks. Carlin-type gold deposits formed where these fluids encountered permeable, reactive Fe-rich rocks.

Nevada↗

USGS2017

Figurines, flint clay sourcing, the Ozark Highlands, and Cahokian acquisition

At the pinnacle of Eastern Woodlands’ prehistoric cultural development, Cahokia has been interpreted as a political and economic power participating in prestige-goods exchanges and trade networks stretching from the Great Plains to the South Atlantic. Among the more spectacular of the Cahokian elite artifacts were stone pipes and figurines made from a distinctive red stone previously identified as Arkansas bauxite. In this research, we used a combination of X-ray diffraction, sequential acid dissolution, and inductively coupled plasma analyses to establish the source of the raw material used in the manufacture of the red figurines and pipes that epitomize the Cahokian-style. Our research demonstrates that these objects were made of locally available flint clays. This finding, in conjunction with other evidence, indicate Cahokian exploitation of many mineral and stone resources focuses on the northern Ozark Highlands to the exclusion of other areas. These findings indicate that we must reassess the direction, extent, and role of Cahokian external contacts and trade in elite goods.

Illinois↗