SEARCH · USGS Science

Results for “Holocene”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 865 records · Page 48Linked to original sources

USGS2017

Geology of Kasatochi Volcano, Aleutian Islands, Alaska

Kasatochi is a small, isolated island volcano in the center of the Aleutian Island chain. It consists of a roughly circular cone ~3 km in diameter with a lake-filled central crater that is 1.2 km in diameter and extends from the highest point on the island to sea level. The earliest unit recognized is a thick series of mid-Pleistocene glaciovolcanic deposits consisting of autobrecciated lava, lahars, and volumetrically minor lava masses that we believe to have been emplaced underneath a regional ice cap. This unit is unconformably overlain by several massive Holocene lavas, above which lies a thick sequence of latest- Holocene pyroclastic deposits likely deposited during the crater-forming eruption. The 2008 eruption enlarged the preexisting crater, and produced pyroclastic density currents, surges, and fall that blanketed the entire island except for steep, seaward-facing cliffs on the flanks and the crater wall. 2008 deposits initially extended the shoreline seaward by up to 500 m. Kasatochi lava and scoria are porphyritic basalt, basaltic andesite, and andesite, all of which bear trace-element evidence for prolonged crustal residence and equilibration with an amphibole-rich gabbroic residue. Lavas from individual effusive eruptions have limited compositional range, whereas juvenile scoriae from explosive eruptions span the majority of the compositional range of the entire volcano. 2008 pyroclastic deposits contain texturally diverse amphibole gabbro clasts and smaller, less abundant, plagioclase-free pyroxenitic and peridotitic cumulate inclusions. We infer that the gabbroic inclusions are from the margins of regions of crustal magma storage and evolution and that equilibration with the amphibole plays an important role in the evolution of mafic and intermediate magmas.

Alaska↗

USGS2005

Neotectonics of the offshore Oak Ridge fault near Ventura, southern California

The Oak Ridge fault is a large-offset, south-dipping reverse fault that forms the south boundary of the Ventura Basin in southern California. Previous research indicates that the Oak Ridge fault south of the town of Ventura has been inactive since 200-400 ka ago and that the fault tip is buried by ??? 1 km of Quaternary sediment. However, very high-resolution and medium-resolution seismic reflection data presented here show a south-dipping fault, on strike with the Oak Ridge fault, that is truncated at 80 m depth by an unconformity that is probably at the base of late Pleistocene and Holocene sediment. Furthermore, if vertically aligned features in seismic reflection data are eroded remnants of fault scarps, then a subsidiary fault within the Oak Ridge system deforms the shallowest imaged sediment layers. We propose that this subsidiary fault has mainly left-slip offset. These observations of Holocene slip on the Oak Ridge fault system suggest that revision of the earthquake hazard for the densely populated Santa Clara River valley and the Oxnard coastal plain may be needed.

Bulletin of the Seismological Society of America↗

USGS2013

Low footwall accelerations and variable surface rupture behavior on the Fort Sage Mountains fault, northeast California

The Fort Sage Mountains fault zone is a normal fault in the Walker Lane of the western Basin and Range that produced a small surface rupture (<20 cm) during an M L 5.6 earthquake in 1950. We investigate the paleoseismic history of the Fort Sage fault and find evidence for two paleoearthquakes with surface displacements much larger than those observed in 1950. Rupture of the Fort Sage fault ∼5.6 ka resulted in surface displacements of at least 0.8–1.5 m, implying earthquake moment magnitudes (M w ) of 6.7–7.1. An older rupture at ∼20.5 ka displaced the ground at least 1.5 m, implying an earthquake of M w 6.8–7.1. A field of precariously balanced rocks (PBRs) is located less than 1 km from the surface‐rupture trace of this Holocene‐active normal fault. Ground‐motion prediction equations (GMPEs) predict peak ground accelerations (PGAs) of 0.2–0.3g for the 1950 rupture and 0.3–0.5g for the ∼5.6 ka paleoearthquake one kilometer from the fault‐surface trace, yet field tests indicate that the Fort Sage PBRs will be toppled by PGAs between 0.1–0.3g. We discuss the paleoseismic history of the Fort Sage fault in the context of the nearby PBRs, GMPEs, and probabilistic seismic hazard maps for extensional regimes. If the Fort Sage PBRs are older than the mid‐Holocene rupture on the Fort Sage fault zone, this implies that current GMPEs may overestimate near‐fault footwall ground motions at this site.

California↗

USGS2019

Shallow structure and geomorphology along the offshore northern San Andreas Fault, Tomales Point to Fort Ross, California

We mapped a poorly documented 35-km-long section of the northern San Andreas fault zone (NSAF) between Tomales Point and Fort Ross, California. Mapping is largely based on high-resolution seismic-reflection profiles (38 fault crossings), multibeam bathymetry, and onshore geology. NSAF strike in this section is nearly parallel to plate motion, characterized by a slight (~2°) northerly (transtensional) bend in the south between Tomales Bay and the Bodega isthmus, and a northwesterly (transpressional) ~5° bend in the north between the Bodega isthmus and Fort Ross. The southern transtensional bend is the northern part of the now-submerged, linear, ~50-km-long and 1- to 2-km-wide, "Tomales-Bodega valley." The valley floor is cut by a complex zone of subparallel, variably continuous fault strands and the deformed valley fill is an inferred mix of late Quaternary marine and nonmarine strata. In the northern part of this elongate valley, Holocene fault offset occurred on two fault strands about 740 m apart. The northern transpressional bend is characterized by narrow, elongate, asymmetric basins containing as much as 56 m of inferred latest Pleistocene to Holocene sediment. Between Bodega Head and Fort Ross, the gently dipping (~0.8°) shelf includes two large (4.8 and 5.9 km2) zones of sediment failure that we speculatively correlate with the 1906 San Francisco NSAF earthquake. Similar sediment-failure zones should be common along offshore reaches of the NSAF and other nearshore fault zones, but have apparent limited preservation potential. Onland geomorphic impacts of the mainly offshore NSAF include: (1) Northward upwarping of uplifted marine terraces in the transpressional zone north of Bodega Bay; and (2) Blocking of littoral sediment transport by uplifts on the west flank of the NSAF at Bodega Head and Tomales Point, resulting in rapidly accreting beaches and large coastal sand dune complexes.

California↗

USGS2020

Post-glacial Mw 7.0-7.5 earthquakes on the North Olympic fault zone, Washington

Holocene crustal faulting in the northern Olympic Peninsula of Washington State manifests in a zone of west‐northwest‐striking crustal faults herein named the North Olympic fault zone, which extends for ∼ 80    km "> ∼ 80 km ∼80 km along strike and includes the Lake Creek–Boundary Creek fault to the east and the Sadie Creek fault and newly discovered scarps to the west. This study focuses on the Sadie Creek fault, which extends for > 14    km "> > 14 km >14 km west‐northwest from Lake Crescent. Airborne light detection and ranging (lidar) imagery reveals the trace of the Sadie Creek fault and offset postglacial landforms showing a history of Holocene surface‐rupturing earthquakes dominated by dextral displacement along a steeply dipping fault zone. Paleoseismic trenches at two sites on the Sadie Creek fault reveal till and outwash overlain by progressively buried forest and wetland soils developed on scarp‐derived colluvial wedges. Trench exposures of complex faulting with subhorizontal slickenlines indicate dextral displacement with lesser dip slip. Correlation of broadly constrained time intervals for earthquakes at the Sadie Creek sites and those to the east along the Lake Creek–Boundary Creek fault is consistent with rupture of much of the length of the North Olympic fault zone three to four times: at about 11, 7, 3, and 1 ka, with a shorter rupture at about 8.5 ka. Dated ruptures from trenches only partially coincide with coseismic landslides and megaturbidites in Lake Crescent, indicating that some earthquakes did not trigger megaturbidites, and some turbidites were unrelated to local fault rupture. Landform mapping suggests single‐event dextral displacement of 4 ± 1    m "> 4 ± 1 m 4±1 m on the Sadie Creek fault. Inferred maximum rupture length and single‐event slip imply earthquake magnitudes M w "> M w Mw 7.0–7.5. Dextral slip rates of 1.3 – 2.3    mm / yr "> 1.3 – 2.3 mm / yr 1.3–2.3 mm/yr and the ∼ 11 , 000    yr "> ∼ 11 , 000 yr ∼11,000 yr slip history suggest that the North Olympic fault zone is a prominent contributor to permanent strain in the northern Cascadia fore‐arc.

Washington↗

USGS2016

Preliminary assessment of a previously unknown fault zone beneath the Daytona Beach sand blow cluster near Marianna, Arkansas

We collected new high‐resolution P ‐wave seismic‐reflection data to explore for possible faults beneath a roughly linear cluster of early to mid‐Holocene earthquake‐induced sand blows to the south of Marianna, Arkansas. The Daytona Beach sand blow deposits are located in east‐central Arkansas about 75 km southwest of Memphis, Tennessee, and about 80 km south of the southwestern end of the New Madrid seismic zone (NMSZ). Previous studies of these sand blows indicate that they were produced between 10,500 and 5350 yr B.P. (before A.D. 1950). The sand blows are large and similar in size to those in the heart of the NMSZ produced by the 1811–1812 earthquakes. The seismic‐reflection profiles reveal a previously unknown zone of near‐vertical faults imaged in the 100–1100‐m depth range that are approximately coincident with a cluster of earthquake‐induced sand blows and a near‐linear surface lineament composed of air photo tonal anomalies. These interpreted faults are expressed as vertical discontinuities with the largest displacement fault showing about 40 m of west‐side‐up displacement at the top of the Paleozoic section at about 1100 m depth. There are about 20 m of folding on reflections within the Eocene strata at 400 m depth. Increasing fault displacement with depth suggests long‐term recurrent faulting. The imaged faults within the vicinity of the numerous sand blow features could be a causative earthquake source, although it does not rule out the possibility of other seismic sources nearby. These newly located faults add to a growing list of potentially active Pleistocene–Holocene faults discovered over the last two decades that are within the Mississippi embayment region but outside of the historical NMSZ.

Arkansas↗

USGS2017

Quaternary displacement rates on the Meeman‐Shelby fault and Joiner ridge horst, eastern Arkansas: Results from coring Mississippi River alluvium

This research used coring and optically stimulated luminescence (OSL) dating of displaced, deeply buried Quaternary alluvium to determine vertical displacement rates for the Meeman‐Shelby fault and the Joiner ridge horst, two structures in northeastern Arkansas that have no modern seismicity associated with them. We drilled continuous cores of the entire alluvial section in the hanging wall of each structure, performed detailed core descriptions and analyses, and obtained three OSL ages from each core. The Meeman‐Shelby fault core consists of 36 m of 4.3–5.2‐ka Holocene alluvium overlying 4 m of 14.3‐ka Kennett alluvium that in turn overlies the upper part of Eocene Claiborne Group sediments at a depth of 41 m. Seismic reflection indicates that the basal (Kennett) alluvium at the Meeman‐Shelby fault is displaced ∼28 m across the Meeman‐Shelby fault, which equates to a time‐averaged vertical displacement rate of 2 mm/yr within the last 14.3 ka. The Joiner ridge horst core consists, in descending order, of 11 m of 6.3‐ka Holocene alluvium, 14 m of 11.5‐ka Morehouse alluvium, a paleosol, 6 m of Kennett alluvium, and 4 m of 20.3‐ka Sikeston alluvium that in turn overlies the upper part of Eocene Claiborne Group sediments at a depth of 36 m. Lignite exploration drilling conducted in the 1970s indicates that basal (Sikeston) alluvium is displaced ∼20 m across the eastern bounding fault of the Joiner ridge horst, resulting in a time‐averaged vertical displacement rate of ∼1 mm/yr within the last 20.3 ka. These late Quaternary displacement rates are comparable to time‐averaged displacement rates of faults within the active New Madrid seismic zone.

Arkansas↗

USGS1991

The Marina District, San Francisco, California: Geology, history, and earthquake effects

A northwest-trending valley in the bedrock surface is buried by firm Pleistocene bay clay, a dense Pleistocene sand layer, soft Holocene bay sediments, loose to dense Holocene beach and dune sands, and artificial fill that have an aggregate maximum thickness of about 90 m (300 ft). Artificial filling of a cove at the site of The Marina District proceeded gradually from the late 1860s to 1912, when major hydraulic filling was done for the Panama-Pacific International Exposition. The remains of thousands of piles driven for the Exposition very probably still exist and have had unknown effects on long-term ground settlement and earthquake-related ground displacements. Intensity maps of the 1906 earthquake, and seismic recordings and severe building damage in 1989, reported by others, indicate that ground motion was amplified on both natural and artificial ground. This suggests that the configuration of the bedrock surface and the location and thickness of various clay and sand deposits underlying the fill had an important effect on the shaking. However, most of the settlement and liquefaction and the damage to pipelines, building foundations, streets, side-walks, and curbs occurred in areas of artificial fill consisting mainly of loose sand.

California↗

USGS1997

Geomorphic response to tectonically-induced ground deformation in the Wabash Valley

Numerous low- to moderate-intensity earthquakes have been recorded in a zone of diffuse modern seismicity in southwest Indiana, southeast Illinois, and northernmost Kentucky. Structural elements within the zone include the Wabash Valley Fault System, the LaSalle Anticlinal Belt in western Illinois, and the Rough Creek-Shawneetown Fault System in northern Kentucky. The presence of seismically-induced liquefaction features in the near-surface alluvial sediments in the region indicates that strong ground motion has occurred in the recent geological past, but because the glacial and alluvial sediments in the Wabash Valley appear to be otherwise undisturbed, post-Paleozoic ground deformation resulting from movement on these structural elements has not yet been documented. Morphometric analysis of the land surface, detailed mapping of geomorphic elements in the valley, reconnaissance drilling of the Holocene and Pleistocene alluvium, and structural analysis of the bedrock underlying the valley were used to determine whether the geomorphology of the valley and the patterns of alluviation of the Wabash River were affected by surface deformation associated with the seismic zone during the late Pleistocene and Holocene. Among the observed features in the valley that can be attributed to deformation are: (1) tilting of the modern land surface to the west, (2) preferred channel migration toward the west side of the valley, with concomitant impact on patterns of soil development and sedimentation rate, (3) a convex longitudinal profile of the Wabash River where it crosses the LaSalle Anticlinal Belt, and (4) increased incision of the river into its floodplain downstream from the anticlinal belt.

Illinois, Indiana↗

USGS2000

Preliminary report on the 16 October 1999 M 7.1 Hector mine, California, earthquake

The M w 7.1 Hector Mine, California, earthquake occurred at 9:46 GMT on 16 October 1999. The event caused minimal damage because it was located in a remote, sparsely populated part of the Mojave Desert, approximately 47 miles east-southeast of Barstow, with epicentral coordinates 34.59°N 116.27°W and a hypocentral depth of 5 ± 3 km. Twelve foreshocks, M 1.9-3.8, preceded the mainshock during the previous twelve hours. All of these events were located close to the hypocenter of the mainshock. The Hector Mine earthquake occurred within the Eastern California Shear Zone (ECSZ). By virtue of its remote location, the societal impact of the Hector Mine earthquake was, fortunately, minimal in spite of the event's appreciable size. The ECSZ is characterized by high seismicity, a high tectonic strain rate, and a broad, distributed zone of north-northwest-trending faults (ECSZ; Figure 1 ; Dokka and Travis, 1990 ; Sauber et al., 1986 ; Sauber et al., 1994 ; Sieh et al., 1993 ). Data regarding the slip rates of faults within the ECSZ suggest that on the order of 15% of the Pacific-North American plate motion occurs along this zone ( Sauber et al., 1986 ; Wesnousky, 1986 ). Most of the faults in the ECSZ have low slip rates and long repeat times for major earthquakes, on the order of several thousands to tens of thousands of years. The occurrence of the Hector Mine earthquake within seven years and only about 30 km east of the 1992 M w 7.3 Landers earthquake suggests that the closely spaced surface faults in the ECSZ are mechanically related. The Hector Mine event involved rupture on two previously mapped fault zones—the Bullion Fault and an unnamed, more northerly-trending fault that is informally referred to in this paper as the Lavic Lake Fault (Dibblee, 1966 , 1967a , b ). Traces of the Bullion Fault exhibit evidence of Holocene displacement and were zoned as active in 1988 under California's Mquist-Priolo Earthquake Fault Zoning Act ( Hart and Bryant, 1997 ). The pattern of rupture along more than one named fault was also observed from the 1992 Landers earthquake ( Hauksson et al., 1993 ; Sieh et al., 1994). Much of the fault zone that produced the Hector Mine earthquake had been buried by relatively young stream deposits, and the fault scarps in bedrock have a subdued morphology. It appears that these faults have not experienced significant offset for perhaps 10,000 years or more ( Hart, 1987 ). Planned future investigations will refine the age of the last event on these faults. The portion of the Lavic Lake Fault that ruptured between the northern end of the Bullion Mountains and Lavic Lake had not previously been mapped. However, our field investigations have identified ancient, subdued fault scarps along portions of the 1999 rupture zone in this area. It thus appears that the entire segment of the Lavic Lake Fault that was involved in the 1999 event had ruptured in the past. As is typical for most faults within the Eastern California Shear Zone, the rate of movement along the Lavic Lake Fault may be quite slow (<1 mm/yr) and should produce earthquakes only infrequently. This event is a reminder that faults that have ruptured in late Quaternary time, but that lack evidence of Holocene displacement, can still produce earthquakes in this low-slip-rate tectonic setting. Additionally, the Hector Mine earthquake is noteworthy for a couple of other reasons. First, it clearly produced triggered seismicity over much of southern California, from the rupture zone toward the south-southwest in particular. Second, as we will discuss, the event may provide new data and insight into recently developed paradigms concerning earthquake interactions and the role of static stress changes. Questions such as these will, of course, be the subject of extensive detailed analyses in years to come. Fortunately, the Hector Mine sequence will provide one of the best data sets obtained to date for a significant earthquake in the United States. Because it occurred when major upgrades to both the regional seismic network (TriNet) and the regional geodetic network (SCIGN) were well underway, the Earth science community will have abundant high-quality data with which to explore the important and interesting questions that have been raised. In this paper, we present and discuss the basic data and preliminary results from the Hector Mine earthquake.

California↗

USGS2015

Fluvial-aeolian interactions in sediment routing and sedimentary signal buffering: an example from the Indus Basin and Thar Desert

Sediment production and its subsequent preservation in the marine stratigraphic record offshore of large rivers are linked by complex sediment-transfer systems. To interpret the stratigraphic record it is critical to understand how environmental signals transfer from sedimentary source regions to depositional sinks, and in particular to understand the role of buffering in obscuring climatic or tectonic signals. In dryland regions, signal buffering can include sediment cycling through linked fluvial and eolian systems. We investigate sediment-routing connectivity between the Indus River and the Thar Desert, where fluvial and eolian systems exchanged sediment over large spatial scales (hundreds of kilometers). Summer monsoon winds recycle sediment from the lower Indus River and delta northeastward, i.e., downwind and upstream, into the desert. Far-field eolian recycling of Indus sediment is important enough to control sediment provenance at the downwind end of the desert substantially, although the proportion of Indus sediment of various ages varies regionally within the desert; dune sands in the northwestern Thar Desert resemble the Late Holocene–Recent Indus delta, requiring short transport and reworking times. On smaller spatial scales (1–10 m) along fluvial channels in the northern Thar Desert, there is also stratigraphic evidence of fluvial and eolian sediment reworking from local rivers. In terms of sediment volume, we estimate that the Thar Desert could be a more substantial sedimentary store than all other known buffer regions in the Indus basin combined. Thus, since the mid-Holocene, when the desert expanded as the summer monsoon rainfall decreased, fluvial-eolian recycling has been an important but little recognized process buffering sediment flux to the ocean. Similar fluvial-eolian connectivity likely also affects sediment routing and signal transfer in other dryland regions globally.

Indus Basin, Thar Desert↗

USGS2009

Review of the geologic history of the Pontchartrain Basin, northern Gulf of Mexico

The Pontchartrain Basin extends over 44,000 km² from northern Mississippi to the Gulf of Mexico and includes one of the largest and most important estuarine systems in the United States. The basin supports a variety of environments, from woodlands in the north to wetlands in the south, and a growing socioeconomic infrastructure that has led to rapid development of the southern half of the basin over the past two centuries. To properly administer this infrastructure, managers need to understand the complex geologic framework of the basin and how it will respond to continued sea-level rise, variable rates and magnitudes of land subsidence, and human alteration of the landscape. This article summarizes the body of work that describes the regional evolution and stratigraphic architecture of the Pontchartrain Basin. The northern two-thirds of the basin is underlain by a stratigraphy of undifferentiated sands and clays deposited throughout the Plio-Pleistocene by glacially influenced rivers. These deposits were weathered and incised by rivers during sea-level low stands, forming a series of terraces that increase with age from south to north. The southern third of the basin is composed of estuaries formed during the Holocene, while shoreline processes created a series of sandy barriers that restricted communication to the Gulf of Mexico. The Mississippi River completed the geologic development of the basin by building a sequence of subdelta lobes along this southern margin over the past 5000 years, further sealing it from the open Gulf of Mexico. Presently, the modern Mississippi River bypasses the estuarine environment and only contributes sediments during flood events when the river overtops the levee system. Sea-level rise, subsidence within the Holocene delta-plain deposits, and movement along numerous fault systems are the active natural processes that continue to affect basin geomorphology.

Louisiana, Mississippi↗

USGS1997

Regional landslide-hazard evaluation using landslide slopes, Western Wasatch County, Utah

Landsliding has historically been one of the most damaging geologic hazards in western Wasatch County, Utah. Accordingly, we mapped and analyzed landslides (slumps and debris slides) in the area to provide an empirical basis for regional landslide-hazard evaluation. The 336 landslides in the 250-sq-mi (650-km 2 ) area involve 20 geologic units, including Mississippian- to Quaternary-aged rock and unconsolidated deposits. Landsliding in western Wasatch County is characterized by a strong correlation between geologic material and landslide-slope inclination. From a simple statistical analysis of overall slope inclinations of late Holocene landslides, we determined “critical” slope inclinations above which late Holocene landsliding has typically occurred and used these as the primary basis for defining relative landslide hazard. The critical slopes vary for individual geologic units and range from 15 to 50 percent (9°–27°). The critical slope values and landslide locations were used in conjunction with geologic and slope maps to construct qualitative landslide-susceptibility maps for use by county planners. The maps delineate areas of low, moderate, and high relative hazard and indicate where studies should be completed prior to development to evaluate site-specific slope-stability conditions. Critical slopes as determined in this study provide a consistent empirical reference that is useful for evaluating relative landslide hazard and guiding land-use-planning decisions in large, geologically complex areas.

Utah↗

USGS1996

Differentiating climatic and successional influences on long-term development of a marsh

Comparison of long—term records of local wetland vegetation dynamics with regional, climate—forced terrestrial vegetation changes can be used to differentiate the rates and effects of autogenic successional processes and allogenic environmental change on wetland vegetation dynamics. We studied Holocene plant macrofossil and pollen sequences from Portage Marsh, a shallow, 18—ha marsh in northeastern Indiana. Between 10 000 and 5700 yr BP the basin was occupied by a shallow, open lake, while upland vegetation consisted of mesic forests of Pinus, Quercus, Ulmus, and Carya. At 5700 yr BP the open lake was replaced rapidly by a shallow marsh, while simultaneously Quercus savanna developed on the surrounding uplands. The marsh was characterized by periodic drawdowns, and the uplands by periodic fires. Species composition of the marsh underwent further changes between 3000 and 2000 yr BP. Upland pollen spectra at Portage Marsh and other sites in the region shifted towards more mesic vegetation during that period. The consistency and temporal correspondence between the changes in upland vegetation and marsh vegetation indicate that the major vegetational changes in the marsh during the Holocene resulted from hydrologic changes forced by regional climate change. Progressive shallowing of the basin by autogenic accumulation of organic sediment constrained vegetational responses to climate change but did not serve as the direct mechanism of change.

Ecology↗

USGS2001

Quaternary geology, Cold Bay and False Pass quadrangles, Alaska Peninsula

Recent mapping and interpretation of Quaternary geologic features has improved our understanding of the interaction between volcanic, glacial, and tectonic activity in the Cold Bay and False Pass 1:250,000-scale quadrangles on the Alaska Peninsula. The glacial and volcanic record of the map area strongly suggests that continental-shelf glaciations and two massive volcanic centers were the dominant controls over landscape development during Pleistocene time. Ancestral Morzhovoi and Emmons Volcanoes were major impediments to flow of shelf glaciers during much of the Pleistocene. Our mapping suggests that the area around Emmons Volcano may have also been an important source area for glaciers during this period. Our data further indicate that Frosty Volcano developed late in the Pleistocene, having had no apparent impact on early Brooks Lake glacial advances but serving as a source area for later glacial advances during late Brooks Lake time. We also believe that major Holocene eruptions of Frosty Volcano have yielded multiple debris and ash flows resulting in the construction of a new south summit cone that filled an earlier crater. Frosty Volcano was the source area for multiple Holocene glacial advances, and its flanks preserve the best record of Neoglacial activity in the map area.

Alaska↗

USGS2009

Mineral Resource Assessment of Marine Sand Resources in Cape- and Ridge-Associated Marine Sand Deposits in Three Tracts, New York and New Jersey, United States Atlantic Continental Shelf

Demand is growing in the United States and worldwide for information about the geology of offshore continental shelf regions, the character of the seafloor, and sediments comprising the seafloor and subbottom. Interest in locating sand bodies or high quality deposits that have potential as sources for beach nourishment and ecosystem restoration is especially great in some regions of the country. The Atlantic coast, particularly New York and New Jersey, has been the focus of these studies for the past 40 years with widely varying results. This study is the first attempt at applying probability statistics to modeling Holocene-age cape-and ridge-associated sand deposits and thus focuses on distinct sand body morphology. This modeling technique may have application for other continental shelf regions that have similar geologic character and late Quaternary sea-level transgression history. An estimated volume of 3.9 billion m3 of marine sand resources is predicted in the cape-and ridge-associated marine sand deposits in three representative regions or tracts on the continental shelf offshore of New York and New Jersey. These estimates are taken from probabilistic distributions of sand resources and are produced using deposit models and Monte Carlo Simulation (MCS) techniques. The estimated sand resources presented here are for only three tracts as described below and for Holocene age sand resources contained in cape-and ridge-associated marine sand deposit types within this area. Other areas may qualify as tracts for this deposit type and other deposit types and geologic ages (for example, paleo-stream channels, blanket and outwash deposits, ebb-tide shoals, and lower sea level-stand deltas), which are present on the New Jersey and New York continental shelf area but are not delineated and modeled in this initial evaluation. Admittedly, only a portion of these probable sand resources will ultimately be available and suitable for production, dependent largely on geographic, economic, preemptive use, environmental, geologic and political factors. In addition, offshore sand resources should only be considered if the area is seaward of the active zone of significant nearshore sediment transport, about 10 to 12 m in depth, and in sufficiently shallow water so that sand can be extracted within U.S. dredging equipment limits, currently about 40 m in depth. If the material is to be used for beach nourishment, material must be of an appropriate sediment texture and character (grain size, sorting, shape, and color) to match the native beach and have mineralogical properties important to its use. Extraction of sand can disturb or alter the benthic habitat and seafloor ecology, so these factors and other site-specific effects will need to be evaluated for any intended use. These and other factors are not considered in this report but can be expected to reduce the total net volume of sand resources available for production. The purpose of this report is to describe and present results from a probabilistic mineral modeling technique previously applied to onshore mineral resources. This modeling and assessment procedure is being used for the first time to assess and estimate offshore aggregate resources; this study is part of the U.S. Geological Survey (USGS) Marine Aggregates Resources and Processes Project (http://woodshole.er.usgs.gov/project-pages/aggregates/).

Bulletin↗

USGS1991

Cores from marine geologic features in the western Gulf of Maine

Submerged geologic features located in the western Gulf of Maine between Cape Ann, Massachusetts and New Hampshire (fig. 1), were identified from high-resolution seismic-reflection data collected between 1979 and 1980. The features include the following. (1) A pair of end morained formed during the retreat of the Laurentide Ice Sheet from the Gulf of Maine (Oldale, 1985a). (2) A barrier spit and lagoon complex and (3) a paleodelta, both of which formed during a late Wisconsinan to early Holocene low relative sea-level stand (Oldale and others, 1983; Oldale, 1985b). (4) A wave-cut unconformity that was eroded as the sea transgressed to its present position. (5) A surficial sand depost that formed atop the unconformity in middle Holocene time. Vibracores (fig. 2) were taken in 1984 to corroborate the interpretations from the seismic data, to determine the sedimentary texture and structure of the features, to identify the nature of the unconformity, and to obtain material for 14 C dating,

Maine↗

USGS2002

Hydrostructural maps of the Death Valley regional flow system, Nevada and California

The locations of principal faults and structural zones that may influence ground-water flow were compiled in support of a three-dimensional ground-water model for the Death Valley regional flow system (DVRFS), which covers 80,000 square km in southwestern Nevada and southeastern California. Faults include Neogene extensional and strike-slip faults and pre-Tertiary thrust faults. Emphasis was given to characteristics of faults and deformed zones that may have a high potential for influencing hydraulic conductivity. These include: (1) faulting that results in the juxtaposition of stratigraphic units with contrasting hydrologic properties, which may cause ground-water discharge and other perturbations in the flow system; (2) special physical characteristics of the fault zones, such as brecciation and fracturing, that may cause specific parts of the zone to act either as conduits or as barriers to fluid flow; (3) the presence of a variety of lithologies whose physical and deformational characteristics may serve to impede or enhance flow in fault zones; (4) orientation of a fault with respect to the present-day stress field, possibly influencing hydraulic conductivity along the fault zone; and (5) faults that have been active in late Pleistocene or Holocene time and areas of contemporary seismicity, which may be associated with enhanced permeabilities. The faults shown on maps A and B are largely from Workman and others (in press), and fit one or more of the following criteria: (1) faults that are more than 10 km in map length; (2) faults with more than 500 m of displacement; and (3) faults in sets that define a significant structural fabric that characterizes a particular domain of the DVRFS. The following fault types are shown: Neogene normal, Neogene strike-slip, Neogene low-angle normal, pre-Tertiary thrust, and structural boundaries of Miocene calderas. We have highlighted faults that have late Pleistocene to Holocene displacement (Piety, 1996). Areas of thick Neogene basin-fill deposits (thicknesses 1-2 km, 2-3 km, and >3 km) are shown on map A, based on gravity anomalies and depth-to-basement modeling by Blakely and others (1999). We have interpreted the positions of faults in the subsurface, generally following the interpretations of Blakely and others (1999). Where geophysical constraints are not present, the faults beneath late Tertiary and Quaternary cover have been extended based on geologic reasoning. Nearly all of these concealed faults are shown with continuous solid lines on maps A and B, in order to provide continuous structures for incorporation into the hydrogeologic framework model (HFM). Map A also shows the potentiometric surface, regional springs (25-35 degrees Celsius, D'Agnese and others, 1997), and cold springs (Turner and others, 1996).

Nevada;California↗