USGS Science⌕ Search

SEARCH · USGS Science

Results for “Environmental Science and Technology - Water”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

1,665 records · Page 48Linked to original sources
USGS2025

Using the D-Claw software package to model lahars in the Middle Fork Nooksack River drainage and beyond, Mount Baker, Washington

Lahars, or volcanic mudflows, are the most hazardous eruption-related phenomena that will affect communities living along rivers that originate on Mount Baker. In the past 15,000 years, the largest lahars from Mount Baker have affected the Middle Fork Nooksack River drainage and beyond. Here we use the physics-based D-Claw software package to model nine lahar scenarios that are initiated as water-saturated landslides between Sherman Crater and the Roman Wall on the Mount Baker edifice and flow down the Middle Fork Nooksack River. The scenarios range in volume from 1 to 260 million cubic meters and have an initial hydraulic permeability from 10 −12 to 10 −10 meters squared. Model output includes data such as flow depth, velocity, runout distance, area inundated, arrival time, and sediment concentration as well as information that allows scientists to calculate other important hydrologic characteristics such as lahar discharge. These data are important to officials who have the responsibility to plan for, or take mitigation measures against, future Mount Baker lahars. To check the validity of the D-Claw results, we compare the scenarios to known geologic information. We also compare D-Claw results with empirical models that have been used in the past to determine potential inundation areas, runout distances, and arrival times. These comparisons highlight similarities and differences between empirical and physics-based models. We also present D-Claw scenario-based animations to help scientists, officials, and lay people alike to visualize how future lahars could affect communities.

Washington↗
USGS2025

Applying U-Th disequilbrium for dating siliceous sinters

Continental hydrothermal systems are critical avenues for the crustal transport of heat and mass captured for geothermal energy and mineral exploration. Thus, understanding their temporal evolution and longevity is important for resource characterization. Deposits of microlaminated siliceous sinter, common surface expressions of high temperature reservoirs (> 170 °C), have the potential to trace hydrothermal histories. Geothermal reservoirs are often located within uranium-bearing silicic volcanic rock where subsurface fluid-rock interactions extract U into hydrothermal fluids. U incorporated in the surface sinter deposit has the potential to provide a U— Th disequilibrium dating option. We focus on samples from El Tatio geyser field in the Altiplano of northern Chile, the largest geothermal system in the Andes. Our resulting 230 Th/U ages, along with the water and deposit elemental compositions, suggest concentrations of U and Th vary predictably along the sinter apron. While distal facies containing the highest U concentrations (> 50 μg/g) are least affected by detrital Th corrections, they can display suspected open-system behavior. In contrast, more medial facies, where bacterial mats and other porous textures are co mmonly concentrated, have only trace amounts of U (< 0.1 μg/g), which leads to unreliable or geologically improbable dates. Proximal facies tend to date most consistently. By comparing existing 14 C ages with 230 Th/U results, 230 Th/U ages tend to be younger than the 14 C ages, supporting the presence of a 14 C-dead carbon influence. New data confirm that the onset of geothermal activity at El Tatio goes back to the late Pleistocene.

Altiplano, El Tatio geyser field↗
USGS2026

Surface variable‐based machine learning for scalable arsenic prediction in undersampled areas

In the United States, private wells are not federally regulated, and many households do not test for Arsenic (As). Chronic exposure is linked with multiple health outcomes, and risk can change sharply over short distances and with well depth. Coarse maps or sparse sampling often miss exceedances. Most existing models operate at ∼1 km resolution and use groundwater chemistry or detailed geologic logs, which limits their use in undersampled areas where improved guidance is most needed. We overcome these limitations by developing a machine learning model for Minnesota, USA, that predicts As exposure risk using only surficial variables from remote sensing and global data sets. Variables related to surface water hydrology and geomorphology are selected based on mechanistic links that control redox conditions and As mobilization. Local training was essential, and surficial geology variables that are more sensitive to local conditions were needed to maximize model accuracy. The resulting complete model was sufficiently sensitive to generate accurate and detailed risk maps and depth profiles of As concentrations above the 10 μg/L maximum contaminant level. Accuracy depended on local training data density. We identified a training data density of 0.07 wells/km 2 as a practical target for stable county-level performance. Maps of exceedance probabilities highlight priority areas for testing that are particularly important in rural communities that have received less sampling. These results support public health action by guiding where to install wells and where to test them, how much new sampling is needed, and where treatment outreach is most urgent.

Minnesota↗
USGS2025

Structural controls on splay fault rupture dynamics during Cascadia megathrust earthquakes

Great subduction earthquakes ( M w ≥ 8.0) can generate devastating tsunamis by rapidly displacing the seafloor and overlying water column. These potentially tsunamigenic seafloor offsets result from coseismic fault slip and deformation beneath or within the accretionary wedge. The mechanics of these shallow rupture phenomena and their dependence on subduction zone properties remain unresolved, partly due to the sparsity of offshore observations of shallow megathrust earthquake deformation. Here, we analyze how offshore structure influences shallow rupture mechanics and slip partitioning using 3D dynamic earthquake simulations of the Cascadia subduction zone (CSZ) megathrust with and without variably dipping seaward- or landward-vergent splay faults in the wedge that sole into the megathrust. Resulting tradeoffs between splay and megathrust slip reveal structural controls on rupture partitioning, with greater splay slip leading to less shallow megathrust slip updip. Gently dipping and seaward-vergent splays host more slip than those with steeper, landward-vergent splays. To isolate the underlying mechanisms, we compare models with Andersonian and plunging principal stresses. Results suggest distinct static and dynamic processes control the dip- and vergence-dependence of splay rupture: static (mis)alignment relative to far-field tectonic loading favors slip on more optimally oriented, shallowly dipping splay faults. In contrast, dynamic stress interactions of an updip-propagating megathrust rupture front with the free surface and potential branch faults favor forward branching onto seaward-vergent splays and inhibit backward branching onto landward-vergent splays. Resulting seafloor displacements suggest splay fault structure may influence coseismic tsunami source processes, highlighting the importance of dynamically viable rupture scenarios in subduction hazard assessments.

Cascadia subduction zone↗
USGS2026

Miocene evolution of the Humboldt Current

Diatom records from the East Pisco Basin (EPB) of southern Peru and offshore Ocean Drilling Program (ODP) Hole 682 A reveal stepwise increases in the primary productivity of the Humboldt Current during the middle and late Miocene. Although diatoms are present back through the late middle Eocene, successively enhanced diatom production occurs during the Miocene in four steps. The first step between 14.2 and 13.8 Ma marks the onset of diatom deposition in the Pisco-0 sequence. A second step at ∼12.9 Ma coincides with a major drop in global sea level during which diatom deposition ceased in the EPB but continued in ODP 682 A as well as in Chile, Ecuador, and Colombia. Beginning at 10.4 to 10.0 Ma, a major increase in diatom sedimentation rates in both the EPB and in ODP 682 A signals an abrupt intensification of the Humboldt Current productivity, which may be related to the closure of the Central American Seaway to deeper water circulation. A fourth step coincides with the transgressive deposition of the diatom-rich Pisco-2 sequence at 8.4 Ma and is enhanced by the onset of the global Late Miocene Biogenic Bloom (8.0–4.5 Ma). Between 7 and 6 Ma, common subtropical diatoms in ODP 682 A contrast with high diatom deposition rates in the EPB, suggesting variable El Niño-La Niña conditions. During this time, fossil vegetation evidence from southern Peru supports the presence of seasonal periods of enhanced rainfall typical of El Niño conditions. The Miocene trend of increasing sea mammal diversity in the EPB parallels these steps, further supporting stepwise enhancement of primary productivity in the Humboldt Current during the Miocene.

Humboldt Current↗
USGS2026

Lithium brine potential of North Dakota: Results from the 2025 sampling program

Lithium (Li), classified as a critical mineral and key in energy storage applications because of its high energy density, faces unprecedented demand. This has driven interest in unconventional sources of Li, especially brines from sedimentary basins. Accordingly, the spatial distribution of basinal brinehosted Li resources across North America is becoming better defined, including the Williston Basin underlying Saskatchewan, Canada. This has led to growing investment and exploration by industry throughout the 2020s; however, despite this interest, the Li potential of basinal brines of the Williston Basin in North Dakota remain underexplored. This work presents the results from the 2025 joint brine sampling campaign between the North Dakota Geological Survey, the United States Geological Survey (USGS), and The University of Texas at Austin. Twenty-seven fluid samples were collected from producing oil and water source wells from eight stratigraphic intervals across western North Dakota and analyzed for major cation and anion concentrations. Similar to southeastern Saskatchewan, the highest Li concentrations were identified in the Devonian Duperow Formation, with concentrations up to 179 mg/L being observed in a well commingled between the Duperow and Red River Formations. Some samples from the overlying Birdbear Formation exceeded 75 mg/L, whereas Li concentrations were lower in the Madison Group (33-44 mg/L) and the Three Forks (50 mg/L), Dawson Bay (43 mg/L), Winnipegosis (23 mg/L), and Red River (40.0 mg/L) Formations. This work indicates Li resource potential exists across the Williston Basin and advances our understanding of the Li distribution in basinal brines which could provide a new domestic source of this critical mineral.

North Dakota↗
USGS2026

Geochemical, mineralogical, and isotopic evidence for multi-stage genesis of the Hicks Dome REE + Y-HFSE-fluorite deposit, Illinois, USA

Hicks Dome hosts breccias enriched in rare earth elements (REE), Y, Th, F, Ba, Ti, Nb, and Be, alongside spatially associated lamprophyre dikes (ca. 271 Ma). Hicks Dome is located within the Illinois–Kentucky Fluorspar District, which hosts fluorite, Pb–Zn, and barite resources. This study investigates the genetic relationships between Hicks Dome mineralization in breccias, alkaline magmatism, and Illinois–Kentucky Fluorspar District mineralization. Lamprophyre dikes are light REE–enriched with chondrite-normalized abundances decreasing from La to Lu. The Host Breccia exhibits middle and heavy REE–enriched patterns that mirror those of the principal REE–Th host minerals, including fluorapatite, xenotime, and thorite. Textural evidence suggests recrystallization of phosphates, sulfates, and Ti–Nb oxides in the Host Breccia. U–Pb geochronology constrains multiple mineralizing events, with ages of 277 ± 18 Ma from low-Th apatite interpreted as main-stage mineralization, and 121.6 ± 9.7 Ma from high-Th apatite indicating later overprinting. O–H–C stable isotope data provide evidence for multiple stages of fluid-rock interaction and fluid mixing: (1) early magmatic fluids dissolved limestone country rock, (2) mixing between magmatic fluids and basinal brines led to main-stage mineralization in the Host Breccia, and (3) late-stage mineralization occurred following mixing of meteoric water and basinal brine. These results indicate that heavy REEs, high field strength elements, and fluorine precipitated proximal to its alkaline magmatic source because of fluid–rock interactions and fluid mixing. Subsequent fluid mixing drove late-stage recrystallization and additional fluorite formation, a process that may be similar to mineralization in the Illinois-Kentucky Fluorspar District.

Illinois↗
USGS2026

Design and function of the Autonomous Benthic Imaging and Surveying System (ABISS) for remote sensing of lake and seabed environments

Lake and seabed environments are home to fisheries and other biota that are important to ecosystems and economies, yet these environments and the species that use them are difficult to accurately assess and monitor. Traditional benthic survey techniques, like bottom trawling used by the U.S. Geological Survey, are limited by substrate constraints, poor spatial resolution and precision, and operational depth limits, hindering accurate assessment of benthic species and habitats. In response to these limitations, the U.S. Geological Survey developed the Autonomous Benthic Imaging and Surveying System, a camera system integrated into underwater vehicles, to capture high-resolution images of the lakebed. The system uses color and stereo cameras to collect imagery, which can be analyzed using computational methods to detect organisms and (or) characterize habitat features, such as geologic substrate types. The system has been integrated into autonomous underwater vehicles and into an underwater housing used by self-contained underwater breathing apparatus (SCUBA) divers. Although the engineering of the system was motivated by the need for data collection in the Great Lakes, it has potential to collect high quality data in any aqueous setting with sufficient water clarity and safe operating conditions. The Autonomous Benthic Imaging and Surveying System can operate across diverse depths and light conditions to map and quantify ecological patterns that were difficult or impossible to assess using traditional methods. The Autonomous Benthic Imaging and Surveying System offers the potential for accurate and precise monitoring and assessment of native benthic biota, invasive species, and habitat, potentially providing natural resource managers with improved information to support decision making about benthic resource management.

Great Lakes↗
USGS2023

Advancing subsurface investigations beyond the borehole with passive seismic horizontal-to-vertical spectral ratio and electromagnetic geophysical methods at transportation infrastructure sites in New Hampshire

The U.S. Geological Survey (USGS), in cooperation with the New Hampshire Department of Transportation (NHDOT), surveyed transportation infrastructure sites using rapidly deployable geophysical methods to assess benefits added to a comprehensive site characterization with traditional geotechnical techniques. Horizontal-to-vertical spectral-ratio (HVSR) passive-seismic and electromagnetic-induction (EMI) methods were applied at 4 sites including a roadway-stream crossing, roadway-bridge rail-trail crossing, commuter-parking expansion, and a railroad-adjacent river-cutbank slope-failure site. Additionally, ground-penetrating-radar (GPR) was used at the slope-failure site. Typically, subsurface geotechnical properties are determined from boring data; however, borings are often spaced hundreds of feet apart, potentially missing important spatial variability between boreholes. Geotechnical site characterization including geophysical surveys helped provide a more accurate characterization by using continuous or near continuous profiling. Three-component ambient noise measured with HVSR methods were used to determine resonance frequency and estimate sediment thickness. The method works when there is a strong shear-wave acoustic impedance contrast (> 2:1) between sediment and bedrock. Sediment thickness estimates from HVSR measurements were combined with boring data to make detailed maps of the bedrock surface altitude. The bulk electrical conductivity of the subsurface was indirectly measured with EMI methods and was used to identify lithologic variations, shallow bedrock, and conductive groundwater. Ground penetrating radar, which transmits pulses of electromagnetic energy into the subsurface and records the amplitude and timing of reflected signals, was used to identify bedding and changes in lithology or water content. By combining geophysical and boring data analyses, transportation projects produced more spatially comprehensive representations of geotechnical subsurface conditions than would be determined using conventional borings alone.

New Hampshire↗
USGS2026

Non-destructive sampling of larval amphibians shows tail tissues reflect whole-body methylmercury concentrations and trophic-related differences in bioaccumulation

Mercury (Hg), and specifically methylmercury (MeHg), is a contaminant of global concern to humans and wildlife, but there is still limited understanding of its effects on many taxa. Amphibians are closely associated with water, where Hg is converted to MeHg, and high concentrations of MeHg can reduce survival of amphibians in the wild. However, limited non-lethal proxies exist for estimating MeHg bioaccumulation in amphibian larvae, which could be used to reduce destructive sampling and allow sampling of imperiled species. We evaluated whether tail clips were indicative of whole-body MeHg concentrations of larval amphibians, whether dragonflies were an effective bioindicator of Hg concentrations of larval amphibians, and compared MeHg bioaccumulation in predatory caudate (salamanders, newts) and non-predatory anuran (frogs, toads) larvae. Tail-clip and whole-body MeHg concentrations were strongly correlated, especially for caudates. There was high variability among sites and species, but caudates had higher MeHg than anurans, and MeHg concentrations of caudates and anurans were strongly correlated. Dragonflies were a weak indicator of MeHg for anurans but strong indicators for larval caudates, likely because caudates and dragonflies are carnivorous and occupy similar trophic positions. Our study revealed that sampling tails can be an effective non-destructive index of whole-body MeHg for larval amphibians and demonstrates differences in MeHg bioaccumulation related to trophic position in larval amphibians and dragonflies. All post-embryo life stages for a broad suite of amphibian species can now be sampled non-lethally for MeHg, allowing for a broader examination of population-level effects and focus on imperiled species that cannot be sampled destructively.

conterminous United States↗
USGS2024

Wildfire, extreme precipitation and debris flows, oh my! Channel response to compounding disturbances in a mountain stream in the Upper Colorado Basin, USA

Compounding changes in climate and human activities stand to increase sediment input to rivers in many landscapes, including via discrete perturbations such as post-fire debris flows. Because sediment supply is a dominant control on river morphology, understanding mountain river responses to sediment regime perturbations is critical to predicting and addressing downstream effects to infrastructure, water security and aquatic habitat. A growing body of literature explores the causes, likelihood, size and composition of post-fire debris flows, but the channel response to these disturbances remains poorly studied. This study used repeat field surveys, time-lapse photographs and pre- and post-disturbance remote sensing datasets to document and analyse space- and time-varying channel response to post-fire debris flows along a steep mountain stream in the Upper Colorado River Basin, USA. Specifically, we evaluated channel morphology and bed composition changes, correlations between channel changes and valley and channel attributes, and the relative importance of spring snowmelt versus summer monsoon events. Several cross-sectional channel change types were observed from lidar a month after post-fire debris-flow events, including channelized and braided incision into deposits, incision into the pre-fire channel bed, bank erosion and no change. Channel changes were most correlated with pre-fire channel width, valley width and unit stream power, and these relationships could be tested in other burned locations to evaluate their transferability. Repeat channel surveys before and after snowmelt indicate rapid recovery and channel narrowing following major sediment disturbances, although sediment deposits remained in the channel margins. Together, these results highlight the importance of field and remote sensing-based channel surveys to improve understanding of, and potential to predict, mountain channel response to compounding climate disturbances.

Earth Surface Processes and Landforms↗
USGS2026

A framework for integrating spatiotemporal deep learning methods with landsat for annual land cover and impervious surface mapping

Land cover information is essential for understanding Earth’s surface dynamics and how vegetation, water, soil, climate, and terrain interact. The National Land Cover Database (NLCD) has been the authoritative source for consistent U.S. land cover mapping. To extend NLCD’s temporal resolution and reduce production latency, we developed the Land Cover Artificial Mapping System (LCAMS)—a prototype spatiotemporal deep learning framework piloted as the foundation for the new Annual NLCD. LCAMS builds on concepts from legacy NLCD and the U.S. Geological Survey Land Change Monitoring, Assessment, and Projection (LCMAP) initiatives. It employs a loosely coupled two-stage architecture consisting of independent but functionally interdependent spatial and temporal models. Spatial models extract per-year information from Landsat data, while the temporal models refine the spatial outputs to enforce inter-annual consistency—critical for reliable land change monitoring. LCAMS produces annual 30 m resolution land cover and impervious surface outputs, with region-specific fine-tuning to generalize across diverse landscapes and temporal dynamics. Validation was conducted using an independent dataset of 1925 randomly sampled plots from five U.S. Landsat Analysis Ready Data (ARD) tiles spanning 1985-2021, selected for spatial and temporal variability. This dataset was used consistently to evaluate LCAMS, Legacy NLCD, and LCMAP. Using the NLCD legend, LCAMS achieved 72.1 ± 1.60% overall agreement, compared to 71.1 ± 1.7% agreement for Legacy NLCD. Using the LCMAP legend, LCAMS achieved 83.4 ± 1.22% agreement, compared to 84.6 ± 1.11% agreement for LCMAP. Overall, LCAMS delivers comparable accuracy while offering higher thematic resolution, longer temporal coverage, and automated production of annual 30 m CONUS land cover.

Remote Sensing of Environment↗
USGS2026

Deep subsurface organic-rich shale supports abundant, diverse, and novel fungi

As Earth’s principal reservoir of organic carbon and microbial biomass, the deep subsurface hosts microorganisms capable of mobilizing this once-sequestered carbon. Contrary to standard assumptions of eukaryotic scarcity, this study documents abundant fungal communities, ranging from 4.2 × 10 3 to 6.8 × 10 3 fungal cells mL −1 , across a methane-producing organic-rich shale 247–556 meters below the surface. Although fungal:bacterial cell ratios ranged from 1:7028 to 1:713, application of biomass conversion factors developed for oceanic systems yielded a median fungal:bacterial biomass ratio of 1:4.7. 16S rRNA gene amplicons revealed bacterial and archaeal communities mirroring those found in well-characterized extremophilic, carbon-degrading environments, while sequencing of 18S rRNA gene and ITS rRNA spacer amplicons collectively identified a eukaryotic hotspot with 689 fungal OTUs across six phyla. The dominant fungal classes, Agaricomycetes and Dothideomycetes, are well-established degraders of recalcitrant carbon compounds at the surface, suggesting they may similarly contribute to organic matter degradation and ecosystem maintenance in the subsurface. Cultivation and isolation efforts yielded 205 fungal strains, including 13 candidate novel taxa, underscoring the deep subsurface as an underexplored eukaryotic habitat. Stable carbon isotopes indicate methane is predominantly generated via microbial conversion of the fossil carbon, while water isotopes suggest in situ geochemical conditions have been relatively stable since the Late Pleistocene, with subglacial recharge as a plausible mechanism for microbial introduction. Collectively, these findings suggest that fungi are underrecognized contributors to organic matter transformation and functional diversity in the deep biosphere, revealing a critical gap in our understanding of deep subsurface ecosystem processes.

Indiana, Michigan, Ohio↗
USGS2025

Using public participatory geographic information systems (PPGIS) to explore uses and values for Mojave Trails National Monument, California

Many people ascribe a variety of values to public lands and waters, but some values are more difficult to assess and quantify than others. Public participatory geographic information systems (PPGIS) are tools that have been used to help quantify and map the public’s diverse values for a landscape. This work describes the first known Office of Management and Budget–approved use of PPGIS by a Department of the Interior bureau. The U.S. Geological Survey developed an internet-based application to aid in gathering PPGIS data, called Values Mapping for Planning in Regional Ecosystems (VaMPIRE). Further, this work describes the first pilot of the VaMPIRE application in coordination with the Bureau of Land Management to collect spatial data and other survey data regarding the public’s uses of and values for locations within Mojave Trails National Monument. We emailed the link to the VaMPIRE application to an interested party email list in 2024 with 207 valid emails and received 74 responses; we also received 47 responses from members of an off-roading social media group. Of the list of 16 value options, recreation was the most popular value for the monument, followed by wilderness and inspirational. Over 1,000 points were placed throughout the monument, indicating locations people use or value, with the locations spread throughout the entire monument. Additionally, most survey respondents stated their ability to receive benefits in locations they mapped would not change in response to a hypothetical scenario related to recreational facility development. This report describes exploratory results from the first use of the VaMPIRE tool in Mojave Trails National Monument and includes reflections on how the process went and considerations for future use of VaMPIRE.

California↗
USGS2026

Resurvey of the Marble Canyon and Bridge Canyon dam sites in Grand Canyon National Park—Changes in sediment storage and evidence supporting the occurrence of bedrock incision through the mid-20th century

The Bureau of Reclamation developed an extensive plan for a network of dams, water tunnels, and hydropower plants in and around Grand Canyon, Arizona, in the 1940s through 1960s. The two largest of these planned dams were the Marble Canyon and Bridge Canyon Dams on the Colorado River. Though these dams were ultimately never built, Reclamation conducted extensive topographic, bathymetric, and subsurface exploration work at the sites proposed for these dams in the 1940s and 1950s. Resurveys of these dam sites were conducted between 1998 and 2021 to determine the changes in sediment storage at these dam sites caused by the upstream construction and operation of Glen Canyon Dam and by the recession of Lake Mead, the reservoir impounded by Hoover Dam. The resurveys of the Marble Canyon dam sites indicate that the post-1950s changes in sediment storage at these dam sites are broadly consistent with flux-based estimates of voluminous sand erosion from Marble Canyon since the 1963 closure of Glen Canyon Dam. These resurveys also suggest that the pre-dam longitudinal variation in sediment thickness over bedrock played a key role in determining the locations of the sand erosion induced by Glen Canyon Dam; more sand eroded from locations where more sand was present in the 1950s. The resurvey of the Bridge Canyon dam sites indicates that the Colorado River’s incision of the Lake Mead delta is regulated both by bed-sediment grain size and downstream hydraulic controls. Finally, analyses of bed-sediment thickness and sedimentological data at the dam sites, and observations of bed scour and gravel transport, suggest that sufficient bedrock was exposed to allow bedrock incision during commonly recurring pre-dam snowmelt floods that entrained small boulders into transport.

Arizona↗
USGS2025

The 3D Elevation Program—Supporting the economy of Massachusetts

Introduction Massachusetts extends from the mountains of the Appalachian system in the west of the State to the sandy beaches and rocky shorelines of the Atlantic coast in the east. Inland topographic data support a wide range of important activities, including geologic mapping, transportation planning, forest and wildlife management, quantifying ecological services, water supply protection, commonwealth-wide infrastructure planning, local site planning, and flood-plain management. Nearshore bathymetry can be used to support coastal portions of the Commonwealth by addressing the combined threats of ocean warming, strong storm surge, and rising sea levels. The maintenance and (or) expansion of Massachusetts ports (for instance, Boston, New Bedford) and Cape Cod sediment management depends upon the accurate mapping of bathymetry and the frequent influx of sediment and redeposition. Critical applications that address the broad range of requirements depend on light detection and ranging (lidar) data that provide a highly detailed three-dimensional (3D) model of the Earth’s surface and aboveground features. The 3D Elevation Program (3DEP) is managed by the U.S. Geological Survey (USGS) in partnership with Federal, State, Tribal, U.S. territorial, and local agencies to acquire consistent lidar coverage at quality level 2 or better to meet the many needs of the Nation and Massachusetts. The status of available and in-progress 3DEP baseline lidar data in Massachusetts is shown in figure 1. 3DEP baseline lidar data include quality level 2 or better, 1-meter or better digital elevation models, and lidar point clouds, and must meet the Lidar Base Specification version 1.2 ( https://www.usgs.gov/3dep/lidarspec ) or newer requirements. The National Enhanced Elevation Assessment identified user requirements and conservatively estimated that availability of lidar data would result in at least $1.23 million in new benefits annually to Massachusetts. The top 10 Massachusetts business uses for 3D elevation data, which are based on the estimated annual conservative benefits of 3DEP, are shown in table 2.

Massachusetts↗
USGS2025

Geochemical and hydrological investigations of historical data collected at the Lee Acres Landfill and Giant Bloomfield Refinery, New Mexico, 1985–2020

The Lee Acres Landfill and Giant Bloomfield Refinery are adjacent properties near the City of Farmington, New Mexico, each having undergone monitoring and remediation related to historical site activities. At the landfill, site cleanup has included the installation of a capillary barrier over former liquid waste lagoons and periodic monitoring of groundwater elevations and groundwater quality. At the refinery, remediation has focused on several petrochemical and crude oil release areas and included soil excavation, groundwater treatment, and regular monitoring of groundwater elevations and quality. Groundwater at both sites has higher concentrations of volatile organic compounds and trace metals than background aquifer concentrations. In 2022, the U.S. Geological Survey compiled the Lee Acres-Giant Bloomfield Refinery Database (LAGBRD), which contains publicly available groundwater-elevation data and organic and inorganic groundwater-quality data from both sites, spanning from 1985 to 2020. Data from the LAGBRD and precipitation data from other sources were used to better understand the cause of relatively high manganese concentrations observed in some groundwater wells at the site through comparison of groundwater chemistry to chemical end members, interpretation of spatial and temporal patterns in the groundwater chemistry, and interpretation of groundwater flow properties. In this study, elevated chloride concentrations in groundwater downgradient from the landfill have been attributed to landfill leachate based on the temporal and spatial variability of chloride concentrations and chloride-to-bromide ratios. Installation of a capillary barrier and surface-water runoff controls at the landfill in 2005 appears to have altered infiltration patterns at that site, resulting in a decrease in chloride at some wells but an increase in chloride and dissolved manganese at others. The timing and relation among groundwater elevation, chloride concentration, and manganese concentration suggest that leachate stored in the vadose zone provides a continued source of contamination to groundwater.

New Mexico↗
USGS2024

Predicting hydrothermal reservoir depth from chemical geothermometers using a three-dimensional temperature model in the Great Basin, USA

Recent work in the Great Basin region of the western United States has made it possible to predict the depth of hydrothermal reservoirs (i.e., the depth at which heat is accumulated prior to ascent via hydrothermal upflow) identified through geochemistry and to contextualize the spatial patterns of these reservoir depths. Chemical geothermometers use the chemical and mineral constituents of hydrothermal fluids to predict the temperature at which fluids equilibrated with the host rocks at depth. Assuming that most of the Great Basin is dominated by conductive conditions until a vertically connected hydrothermal flow path is created (e.g., by faulting), geothermometers reflect the chemical and thermal conditions at the depth interval that the fluid has conductively equilibrated over a long period before a vertical conduit allows convective upflow. By pairing geothermometer temperature estimates with our recent three-dimensional temperature model of conductive heat flow in the Great Basin, we estimate the corresponding reservoir depths and construct a map of circulation depths. The predicted depths from geothermometers have spatial patterns across the Great Basin that relate to patterns seen in other geologic and geophysical data. Deeper springs generally occur disproportionately in areas with higher strain rates and in basins. We posit that current elevated strain rates reflect patterns of historic deformation where ongoing tectonic activity maintains permeable pathways to deeper reservoirs, some of which are estimated to exceed 6 km depth. Basins, as expected, contain a disproportionate number of these deep systems, because the underlying aquifers are closer to the surface in basins, thus requiring less water pressure to reach the surface than in mountain ranges. Most springs estimated to have their source in a deep reservoir occur at places known to host a hydrothermal system; these refined depth estimates of the source reservoir can help to better constrain the source depth for many known hydrothermal systems across the Great Basin.

Arizona, California, Idaho, Nevada, Oregon, Utah↗