USGS Science⌕ Search

SEARCH · USGS Science

Results for “Environmental Data Science”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 865 records · Page 48Linked to original sources
USGS2017

Contaminant gradients in trees: Directional tree coring reveals boundaries of soil and soil-gas contamination with potential applications in vapor intrusion assessment

Contaminated sites pose ecological and human-health risks through exposure to contaminated soil and groundwater. Whereas we can readily locate, monitor, and track contaminants in groundwater, it is harder to perform these tasks in the vadose zone. In this study, tree-core samples were collected at a Superfund site to determine if the sample-collection location around a particular tree could reveal the subsurface location, or direction, of soil and soil-gas contaminant plumes. Contaminant-centroid vectors were calculated from tree-core data to reveal contaminant distributions in directional tree samples at a higher resolution, and vectors were correlated with soil-gas characterization collected using conventional methods. Results clearly demonstrated that directional tree coring around tree trunks can indicate gradients in soil and soil-gas contaminant plumes, and the strength of the correlations were directly proportionate to the magnitude of tree-core concentration gradients (spearman’s coefficient of -0.61 and -0.55 in soil and tree-core gradients, respectively). Linear regression indicates agreement between the concentration-centroid vectors is significantly affected by in-planta and soil concentration gradients and when concentration centroids in soil are closer to trees. Given the existing link between soil-gas and vapor intrusion, this study also indicates that directional tree coring might be applicable in vapor intrusion assessment.

Missouri↗
USGS2007

The distribution, occurrence and environmental effect of mercury in Chinese coals

Mercury (Hg) is a toxic, persistent, and globally distributed pollutant due to its characteristic properties such as low melting and boiling points, conversion between chemical forms and participation in biological cycles. During combustion mercury in coal is almost totally emitted to the atmosphere. With a huge amount of coal consumed, coal combustion is one of the main anthropogenic sources of this element in the environment. In this study, Hg data of 1699 coal samples of China has been compiled, and the concentration, distribution, modes of occurrence, and the impact of Hg emissions on the environment are investigated. Most Chinese coals have Hg content in the range of 0.1 to 0.3??ppm, with an average of 0.19??ppm, which is slightly higher than the average Hg content of world coals and is close to that of the U.S. coals. The Hg content in coals varies in different coal basins, geological ages and coal ranks. The most likely mode of occurrences of Hg in high-sulfur and high Hg content coals is as solid solution in pyrite. But in low-sulfur coals, modes of occurrence of Hg are variable, and the organic-bound and sulfide-bound Hg may dominate. Silicate-bound Hg may be the main form in some coals because of magmatic intrusion. Mercury emissions during coal combustion have resulted in serious environmental contamination in China, particularly in the northeastern and southwestern China, where a high Hg content in the atmosphere occurs. ?? 2007 Elsevier B.V. All rights reserved.

Science of the Total Environment↗
USGS2008

EAARL topography - Natchez Trace Parkway 2007: First surface

These remotely sensed, geographically referenced elevation measurements of Lidar-derived first surface (FS) topography were produced as a collaborative effort between the U.S. Geological Survey (USGS), Florida Integrated Science Center (FISC), St. Petersburg, FL; the National Park Service (NPS), Gulf Coast Network, Lafayette, LA; and the National Aeronautics and Space Administration (NASA), Wallops Flight Facility, VA. This project provides highly detailed and accurate datasets of a portion of the Natchez Trace Parkway in Mississippi, acquired on September 14, 2007. The datasets are made available for use as a management tool to research scientists and natural resource managers. An innovative airborne Lidar instrument originally developed at the NASA Wallops Flight Facility, and known as the Experimental Advanced Airborne Research Lidar (EAARL), was used during data acquisition. The EAARL system is a raster-scanning, waveform-resolving, green-wavelength (532-nanometer) Lidar designed to map near-shore bathymetry, topography, and vegetation structure simultaneously. The EAARL sensor suite includes the raster-scanning, water-penetrating full-waveform adaptive Lidar, a down-looking red-green-blue (RGB) digital camera, a high-resolution multi-spectral color infrared (CIR) camera, two precision dual-frequency kinematic carrier-phase GPS receivers, and an integrated miniature digital inertial measurement unit, which provide for submeter georeferencing of each laser sample. The nominal EAARL platform is a twin-engine Cessna 310 aircraft, but the instrument may be deployed on a range of light aircraft. A single pilot, a Lidar operator, and a data analyst constitute the crew for most survey operations. This sensor has the potential to make significant contributions in measuring sub-aerial and submarine coastal topography within cross-environmental surveys. Elevation measurements were collected over the survey area using the EAARL system, and the resulting data were then processed using the Airborne Lidar Processing System (ALPS), a custom-built processing system developed in a NASA-USGS collaboration. ALPS supports the exploration and processing of Lidar data in an interactive or batch mode. Modules for presurvey flight line definition, flight path plotting, Lidar raster and waveform investigation, and digital camera image playback have been developed. Processing algorithms have been developed to extract the range to the first and last significant return within each waveform. ALPS is used routinely to create maps that represent submerged or first surface topography. Specialized filtering algorithms have been implemented to determine the 'bare earth' under vegetation from a point cloud of last return elevations.

Data Series↗
USGS1992

Statistical analysis of the radon-222 potential of rocks in Virginia, U.S.A.

More than 3,200 indoor radon-222 (222Rn) measurements were made seasonally in an area of about 1,000 square kilometers of the Coastal Plain and Piedmont physiographic provinces in Virginia, U.S.A. Results of these measurements indicate that some geological units are associated, on the average, with twice as much indoor222Rn as other geological units, and that indoor222Rn varies seasonally. The Kruskal-Wallis test was used to test whether indoor222Rn concentrations for data gathered over the winter and summer seasons differ significantly by rock unit. The tests concluded that indoor222Rn concentrations for different rock units were not equal at the 5-percent significance level. The rocks associated with the highest median indoor222Rn concentration are specific rocks in the Mesozoic Culpeper basin, including shale and siltstone units with Jurassic diabase intrusives, and mica schists in the Piedmont physiographic province. The pre-Triassic Peters Creek Schist has the highest ranking in terms of indoor222Rn concentration. The rocks associated with the lowest indoor222Rn concentrations include coastal plain sediments, the Occoquan Granite, Falls Church Tonalite, Piney Branch Mafic and Ultramafic complex, and unnamed mafic and ultramafic inclusions, respectively. The rocks have been ranked according to observed222Rn concentration by transforming the average rank of indoor222Rn concentrations to z scores. ?? 1992 Springer-Verlag New York Inc.

Environmental Geology and Water Sciences↗
USGS2009

Environmental influences on speleothem growth in southwestern Oregon during the last 380, 000 years

The growth of carbonate formations in caves (speleothems) is sensitive to changes in environmental conditions at the surface (temperature, precipitation and vegetation) and can provide useful paleoclimatic and paleoenvironmental information. We use 73 230 Th dates from speleothems collected from a cave in southwestern Oregon (USA) to constrain speleothem growth for the past 380 000 years. Most speleothem growth occurred during interglacial periods, whereas little growth occurred during glacial intervals. To evaluate potential environmental controls on speleothem growth we use two new modeling approaches: i) a one-dimensional thermal advection–diffusion model to estimate cave temperatures during the last glacial cycle, and ii) a regional climate model simulation for the Last Glacial Maximum (21 000 years before present) that assesses a range of potential controls on speleothem growth under peak glacial conditions. The two models are mutually consistent in indicating that permafrost formation did not influence speleothem growth during glacial periods. Instead, the regional climate model simulation combined with proxy data suggest that the influence of the Laurentide and Cordilleran ice sheets on atmospheric circulation induced substantial changes in water balance in the Pacific Northwest and affected speleothem growth at our location. The overall drier conditions during glacial intervals and associated periods of frozen topsoil at times of maximum surface runoff likely induced drastic changes in cave recharge and limited speleothem growth. This mechanism could have affected speleothem growth in other mid-latitude caves without requiring the presence of permafrost.

Oregon↗
USGS2016

Effects of flow regime on metal concentrations and the attainment of water quality standards in a remediated stream reach, Butte, Montana

Low-flow synoptic sampling campaigns are often used as the primary tool to characterize watersheds affected by mining. Although such campaigns are an invaluable part of site characterization, investigations which focus solely on low-flow conditions may yield misleading results. The objective of this paper is to demonstrate this point and elucidate the mechanisms responsible for the release of metals during rainfall runoff. This objective is addressed using data from diel and synoptic sampling campaigns conducted over a two-day period. Low-flow synoptic sampling results indicate that concentrations of most constituents meet aquatic standards. This finding is in contrast to findings from a diel sampling campaign that captured dramatic increases in concentrations during rainfall runoff. Concentrations during the rising limb of the hydrograph were 2–23 times concentrations observed during synoptic sampling (most increases were >10-fold), remaining elevated during the receding limb of the hydrograph to produce a clockwise hysteresis loop. Hydrologic mechanisms responsible for the release of metals include increased transport due to resuspension of streambed solids, erosion of alluvial tailings, and overland flow. Rainfall also elevated the alluvial groundwater table and increased infiltration through the vadose zone, likely resulting in dissolution from alluvial tailings that were dry prior to the event.

Montana↗
USGS2017

Evidence of coupled carbon and iron cycling at a hydrocarbon-contaminated site from time lapse magnetic susceptibility

Conventional characterization and monitoring of hydrocarbon (HC) pollution is often expensive and time-consuming. Magnetic susceptibility (MS) has been proposed as an inexpensive, long-term monitoring proxy of the degradation of HC. We acquired repeated down hole MS logging data in boreholes at a HC-contaminated field research site in Bemidji, MN, USA. The MS data were analyzed in conjunction with redox conditions and iron availability within the source zone to better assess whether MS can serve as a proxy for monitoring HC contamination in unconsolidated sediments. The MS response at the site diminished during the sampling period, which was found to coincide with depletion of solid phase iron in the source zone. Previous geochemical observations and modeling at the site suggest that the most likely cause of the decrease in MS is the transformation of magnetite to siderite, coupled with the exhaustion of ferrihydrite. Although the temporal MS response at this site gives valuable field-scale evidence for changing conditions of iron cycling and stability of iron minerals it does not provide a simple proxy for long-term monitoring of biodegradation of hydrocarbons in the smear zone.

Minnesota↗
USGS2006

Evaluation of the factors controlling the time-dependent inactivation rate coefficients of bacteriophage MS2 and PRD1

Static and dynamic batch experiments were conducted to study the effects of temperature and the presence of sand on the inactivation of bacteriophage MS2 and PRD1. The experimental data suggested that the inactivation process can be satisfactorily represented by a pseudo-first-order expression with time-dependent rate coefficients. The time-dependent rate coefficients were used to determine pertinent thermodynamic properties required for the analysis of the molecular processes involved in the inactivation of each bacteriophage. A combination of high temperature and the presence of sand appears to produce the greatest disruption to the surrounding protein coat of MS2. However, the lower activation energies for PRD1 indicate a weaker dependence of the inactivation rate on temperature. Instead, the presence of air-liquid and air-solid interfaces appears to produce the greatest damage to specific viral components that are related to infection. These results indicate the importance of using thermodynamic parameters based on the time-dependent inactivation model to better predict the inactivation of viruses in groundwater. ?? 2006 American Chemical Society.

Environmental Science & Technology↗
USGS2003

Relations between introduced fish and environmental conditions at large geographic scales

Data collected from 20 major river basins between 1993 and 1995 as part of the US Geological Survey's (USGS) National Water-Quality Assessment (NAWQA) Program were analyzed to assess patterns in introduced and native fish species richness and abundance relative to watershed characteristics and stream physicochemistry. Sites (N = 157) were divided into three regions-northeast, southeast, and west- to account for major longitudinal differences in precipitation/runoff and latitudinal limits of glaciation that affect zoogeographic patterns in fish communities. Common carp (Cyprinus carpio) and largemouth bass (Micropterus salmoides) were the most frequently collected introduced fish species across all river basins combined. Based on the percentage of introduced fish species, the fish communities most altered by the presence of introduced fish occurred in the western and northeastern parts of the US. Native fish species richness was not an indicator of introduced fish species richness for any of the three regions. However, in the west, introduced fish species richness was an indicator of total fish species richness and the abundance of introduced fish was negatively related to native fish species richness. Some relations between introduced fish species and environmental conditions were common between regions. Increased introduced fish species richness was related to increased population density in the northeast and southeast; increased total nitrogen in the northeast and west; and increased total phosphorous and water temperature in the southeast and west. These results suggest that introduced fish species tend to be associated with disturbance at large geographic scales, though specific relations may vary regionally. ?? 2003 Elsevier Science Ltd. All rights reserved.

Ecological Indicators↗
USGS2008

EAARL topography: Jean Lafitte National Historical Park and Preserve 2006

These remotely sensed, geographically referenced elevation measurements of Lidar-derived first surface (FS) and bare earth (BE) topography were produced as a collaborative effort between the U.S. Geological Survey (USGS), Florida Integrated Science Center (FISC), St. Petersburg, FL; the National Park Service (NPS), Gulf Coast Network, Lafayette, LA; and the National Aeronautics and Space Administration (NASA), Wallops Flight Facility, VA. This project provides highly detailed and accurate datasets of the Jean Lafitte National Historical Park and Preserve in Louisiana, acquired on September 22, 2006. The datasets are made available for use as a management tool to research scientists and natural resource managers. An innovative airborne Lidar instrument originally developed at the NASA Wallops Flight Facility, and known as the Experimental Advanced Airborne Research Lidar (EAARL), was used during data acquisition. The EAARL system is a raster-scanning, waveform-resolving, green-wavelength (532-nanometer) Lidar designed to map near-shore bathymetry, topography, and vegetation structure simultaneously. The EAARL sensor suite includes the raster-scanning, water-penetrating full-waveform adaptive Lidar, a down-looking red-green-blue (RGB) digital camera, a high-resolution multi-spectral color infrared (CIR) camera, two precision dual-frequency kinematic carrier-phase GPS receivers, and an integrated miniature digital inertial measurement unit, which provide for submeter georeferencing of each laser sample. The nominal EAARL platform is a twin-engine Cessna 310 aircraft, but the instrument may be deployed on a range of light aircraft. A single pilot, a Lidar operator, and a data analyst constitute the crew for most survey operations. This sensor has the potential to make significant contributions in measuring sub-aerial and submarine coastal topography within cross-environmental surveys. Elevation measurements were collected over the survey area using the EAARL system, and the resulting data were then processed using the Airborne Lidar Processing System (ALPS), a custom-built processing system developed in a NASA-USGS collaboration. ALPS supports the exploration and processing of Lidar data in an interactive or batch mode. Modules for presurvey flight line definition, flight path plotting, Lidar raster and waveform investigation, and digital camera image playback have been developed. Processing algorithms have been developed to extract the range to the first and last significant return within each waveform. ALPS is used routinely to create maps that represent submerged or first surface topography. Specialized filtering algorithms have been implemented to determine the 'bare earth' under vegetation from a point cloud of last return elevations.

Louisiana↗
USGS2009

EAARL topography - George Washington Birthplace National Monument 2008

These remotely sensed, geographically referenced elevation measurements of Lidar-derived bare earth (BE) and first surface (FS) topography were produced as a collaborative effort between the U.S. Geological Survey (USGS), Florida Integrated Science Center (FISC), St. Petersburg, FL; the National Park Service (NPS), Northeast Coastal and Barrier Network, Kingston, RI; and the National Aeronautics and Space Administration (NASA), Wallops Flight Facility, VA. This project provides highly detailed and accurate datasets of the George Washington Birthplace National Monument in Virginia, acquired on March 26, 2008. The datasets are made available for use as a management tool to research scientists and natural resource managers. An innovative airborne Lidar instrument originally developed at the NASA Wallops Flight Facility, and known as the Experimental Advanced Airborne Research Lidar (EAARL) was used during data acquisition. The EAARL system is a raster-scanning, waveform-resolving, green-wavelength (532-nanometer) Lidar designed to map near-shore bathymetry, topography, and vegetation structure simultaneously. The EAARL sensor suite includes the raster-scanning, water-penetrating full-waveform adaptive Lidar, a down-looking red-green-blue (RGB) digital camera, a high-resolution multi-spectral color infrared (CIR) camera, two precision dual-frequency kinematic carrier-phase GPS receivers, and an integrated miniature digital inertial measurement unit, which provide for submeter georeferencing of each laser sample. The nominal EAARL platform is a twin-engine Cessna 310 aircraft, but the instrument may be deployed on a range of light aircraft. A single pilot, a Lidar operator, and a data analyst constitute the crew for most survey operations. This sensor has the potential to make significant contributions in measuring sub-aerial and submarine coastal topography within cross-environmental surveys. Elevation measurements were collected over the survey area using the EAARL system, and the resulting data were then processed using the Airborne Lidar Processing System (ALPS), a custom-built processing system developed in a NASA-USGS collaboration. ALPS supports the exploration and processing of Lidar data in an interactive or batch mode. Modules for presurvey flight line definition, flight path plotting, Lidar raster and waveform investigation, and digital camera image playback have been developed. Processing algorithms have been developed to extract the range to the first and last significant return within each waveform. ALPS is routinely used to create maps that represent submerged or first surface topography. Specialized filtering algorithms have been implemented to determine the 'bare earth' under vegetation from a point cloud of last return elevations.

Virginia↗
USGS2021

Identifying policy-relevant indicators for assessing landscape vegetation patterns to inform planning and management on multiple use public lands

Understanding the structure and composition of landscapes can empower agencies to effectively manage public lands for multiple uses while sustaining land health. Many landscape metrics exist, but they are not often used in public land decision-making. Our objectives were to (1) develop and (2) apply a process for identifying a core set of indicators that public land managers can use to understand landscape-level resource patterns on and around public lands. We first developed a process for identifying indicators that are grounded in policy, feasible to quantify using existing data and resources, and useful for managers. We surveyed landscape monitoring efforts by other agencies, gathered science and agency input on monitoring goals, and quantified the prevalence of potential indicators in agency land health standards to identify five landscape indicators: amount, distribution, patch size, structural connectivity, and diversity of vegetation types. We then conducted pilot applications in four bureau of land management (BLM) field offices in Arizona, California, and Colorado to refine procedures for quantifying the indicators and assess the utility of the indicators for managers. Results highlighted the dominance of upland and the limited extent of riparian/wetland vegetation communities, moderate connectivity of priority vegetation patches, and lower diversity of native vegetation types on BLM compared to non-BLM lands. Agency staff can use the indicators to inform the development of quantitative resource management objectives in land use plans, evaluate progress in meeting those objectives, quantify potential impacts of proposed actions, and as a foundation for an all-lands approach to landscape-level management across public lands.

Environmental Management↗
USGS2007

Representing general theoretical concepts in structural equation models: The role of composite variables

Structural equation modeling (SEM) holds the promise of providing natural scientists the capacity to evaluate complex multivariate hypotheses about ecological systems. Building on its predecessors, path analysis and factor analysis, SEM allows for the incorporation of both observed and unobserved (latent) variables into theoretically-based probabilistic models. In this paper we discuss the interface between theory and data in SEM and the use of an additional variable type, the composite. In simple terms, composite variables specify the influences of collections of other variables and can be helpful in modeling heterogeneous concepts of the sort commonly of interest to ecologists. While long recognized as a potentially important element of SEM, composite variables have received very limited use, in part because of a lack of theoretical consideration, but also because of difficulties that arise in parameter estimation when using conventional solution procedures. In this paper we present a framework for discussing composites and demonstrate how the use of partially-reduced-form models can help to overcome some of the parameter estimation and evaluation problems associated with models containing composites. Diagnostic procedures for evaluating the most appropriate and effective use of composites are illustrated with an example from the ecological literature. It is argued that an ability to incorporate composite variables into structural equation models may be particularly valuable in the study of natural systems, where concepts are frequently multifaceted and the influence of suites of variables are often of interest. ?? Springer Science+Business Media, LLC 2007.

Environmental and Ecological Statistics↗
USGS2024

Naturalized species drive functional trait shifts in plant communities

Despite decades of research documenting the consequences of naturalized and invasive plant species on ecosystem functions, our understanding of the functional underpinnings of these changes remains rudimentary. This is partially due to ineffective scaling of trait differences between native and naturalized species to whole plant communities. Working with data from over 75,000 plots and over 5,500 species from across the United States, we show that changes in the functional composition of communities associated with increasing abundance of naturalized species mirror the differences in traits between native and naturalized plants. We find that communities with greater abundance of naturalized species are more resource acquisitive aboveground and belowground, shorter, more shallowly rooted, and increasingly aligned with an independent strategy for belowground resource acquisition via thin fine roots with high specific root length. We observe shifts toward herbaceous-dominated communities but shifts within both woody and herbaceous functional groups follow community-level patterns for most traits. Patterns are remarkably similar across desert, grassland, and forest ecosystems. Our results demonstrate that the establishment and spread of naturalized species, likely in combination with underlying environmental shifts, leads to predictable and consistent changes in community-level traits that can alter ecosystem functions.

Proceedings of the National Academy of Sciences↗
USGS2019

Cryptosporidium incidence and surface water influence of groundwater supplying public water systems in Minnesota, USA

Regulations for public water systems (PWS) in the U.S. consider Cryptosporidium a microbial contaminant of surface water supplies. Ground- water is assumed free of Cryptosporidium unless surface water is entering supply wells. We determined the incidence of Cryptosporidium in PWS wells varying in surface water influence. Community and noncommunity PWS wells (n = 145) were sampled (n = 964) and analyzed for Cryptosporidium by qPCR and immunofluorescence assay (IFA). Surface water influence was assessed by stable isotopes and the expert judgment of hydrogeologists using site-specific data. Fifty-eight wells (40%) and 107 samples (11%) were Cryptosporidium- positive by qPCR, and of these samples 67 were positive by IFA. Cryptosporidium concentrations measured by qPCR and IFA were significantly correlated (p < 0.001). Cryptosporidium incidence was not associated with surface water influence as assessed by stable isotopes or expert judgment. We successfully sequenced 45 of the 107 positive samples to identify species, including C. parvum (41), C. andersoni (2), and C. hominis (2), and the predominant subtype was C. parvum IIa A17G2R1. Assuming USA regulations for surface water-supplied PWS were applicable to the study wells, wells positive for Cryptosporidium by IFA would likely be required to add treatment. Cryptosporidium is not uncommon in groundwater, even when surface water influence is absent.

Minnesota↗
USGS2026

Decadal trends and occurrence of geogenic constituents and mixtures in groundwater across the continental United States

Worldwide, about 50% of the population is served by groundwater-sourced drinking water. Numerous groundwater quality assessments have found that geogenic constituents are among the most common contaminants in drinking-water aquifers. Documenting changing groundwater quality is a crucial aspect of water availability assessments. We assess trends and occurrence of geogenic constituent concentrations in groundwater across the continental United States using 3 decades of data from the U.S. Geological Survey’s National Water Quality Network. Thousands of groundwater wells were grouped into agricultural, urban, or domestic supply network types. Although most networks and constituents had no statistically significant change in concentration, many had increasing concentration trends, elevated concentrations, or both. Lithium, sodium, radium, sulfate, and uranium had increasing trends in more than 10% of the study networks. Urban and domestic well networks had increasing lithium and sodium trends more often than agricultural networks. Manganese most commonly increased in domestic well networks; uranium more commonly increased in agricultural and urban networks. Elevated concentration mixtures were widespread, and mixture complexities appeared to increase over time. Our results indicate that more than 2.3 million domestic-well users may be affected by elevated concentrations of one or more geogenic constituents.

continental United States↗
USGS2003

Effects of dissolved carbonate on arsenate adsorption and surface speciation at the hematite-water interface

Effects of dissolved carbonate on arsenate [As(V)] reactivity and surface speciation at the hematite−water interface were studied as a function of pH and two different partial pressures of carbon dioxide gas [ P CO 2 = 10 - 3.5 atm and ∼0; CO 2 -free argon (Ar)] using adsorption kinetics, pseudo-equilibrium adsorption/titration experiments, extended X-ray absorption fine structure spectroscopic (EXAFS) analyses, and surface complexation modeling. Different adsorbed carbonate concentrations, due to the two different atmospheric systems, resulted in an enhanced and/or suppressed extent of As(V) adsorption. As(V) adsorption kinetics [4 g L - 1 , [As(V)] 0 = 1.5 mM and I = 0.01 M NaCl] showed carbonate-enhanced As(V) uptake in the air-equilibrated systems at pH 4 and 6 and at pH 8 after 3 h of reaction. Suppressed As(V) adsorption was observed in the air-equilibrated system in the early stages of the reaction at pH 8. In the pseudo-equilibrium adsorption experiments [1 g L - 1 , [As(V)] 0 = 0.5 mM and I = 0.01 M NaCl], in which each pH value was held constant by a pH-stat apparatus, effects of dissolved carbonate on As(V) uptake were almost negligible at equilibrium, but titrant (0.1 M HCl) consumption was greater in the air-equilibrated systems ( P CO 2 = 10 - 3.5 atm) than in the CO 2 -free argon system at pH 4−7.75. The EXAFS analyses indicated that As(V) tetrahedral molecules were coordinated on iron octahedral via bidentate mononuclear (≈2.8 Å) and bidentate binuclear (≈3.3 Å) bonding at pH 4.5−8 and loading levels of 0.46−3.10 μM m - 2 . Using the results of the pseudo-equilibrium adsorption data and the XAS analyses, the pH-dependent As(V) adsorption under the P CO 2 = 10 - 3.5 atm and the CO 2 -free argon system was modeled using surface complexation modeling, and the results are consistent with the formation of nonprotonated bidentate surface species at the hematite surfaces. The results also suggest that the acid titrant consumption was strongly affected by changes to electrical double-layer potentials caused by the adsorption of carbonate in the air-equilibrated system. Overall results suggest that the effects of dissolved carbonate on As(V) adsorption were influenced by the reaction conditions [e.g., available surface sites, initial As(V) concentrations, and reaction times]. Quantifying the effects of adsorbed carbonate may be important in predicting As(V) transport processes in groundwater, where iron oxide-coated aquifer materials are exposed to seasonally fluctuating partial pressures of CO 2 (g).

Environmental Science & Technology↗
USGS2007

Identifying sources of nitrogen to Hanalei Bay, Kauai, utilizing the nitrogen isotope signature of macroalgae

Sewage effluent, storm runoff, discharge from polluted rivers, and inputs of groundwater have all been suggested as potential sources of land derived nutrients into Hanalei Bay, Kauai. We determined the nitrogen isotopic signatures (δ 15 N) of different nitrate sources to Hanalei Bay along with the isotopic signature recorded by 11 species of macroalgal collected in the Bay. The macroalgae integrate the isotopic signatures of the nitrate sources over time, thus these data along with the nitrate to dissolved inorganic phosphate molar ratios (N:P) of the macroalgae were used to determine the major nitrate source to the bay ecosystem and which of the macro-nutrients is limiting algae growth, respectively. Relatively low δ 15 N values (average −0.5‰) were observed in all algae collected throughout the Bay; implicating fertilizer, rather than domestic sewage, as an important external source of nitrogen to the coastal water around Hanalei. The N:P ratio in the algae compared to the ratio in the Bay waters imply that the Hanalei Bay coastal ecosystem is nitrogen limited and thus, increased nitrogen input may potentially impact this coastal ecosystem and specifically the coral reefs in the Bay. Identifying the major source of nutrient loading to the Bay is important for risk assessment and potential remediation plans.

Hawaii↗