USGS Science⌕ Search

SEARCH · USGS Science

Results for “Engineering Analysis”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 865 records · Page 48Linked to original sources

Seismic responses of two adjacent buildings. I. Data and analyses

In this two-part paper, responses of two, adjacent, seven-story buildings in Norwalk, California, to the Whittier-Narrows, Calif, earthquake of Oct. 1, 1987 are studied. Building A, instrumented according to code recommendations, and building B, extensively instrumented, are offset by 16.3 m from one another. The data set includes motions from the superstructure of both buildings, from a downhole below the foundation of building B, and from three free-field sites. Part I of the paper includes descriptions of the buildings, site, instrumentation, and analysis of the data of each building. System identification and spectral analysis techniques are employed in part I. Building A has identical first-mode frequencies of 0.65 Hz for both building axes. The strong-motion response characteristics of building A are considerably different than those determined from low-amplitude tests. Building B has fundamental modes at 0.76 Hz and 0.83 Hz in the major and minor axes, respectively. Torsional and diaphragm effects in building B are negligible.

Journal of Structural Engineering↗

Pros and cons of rotating ground motion records to fault-normal/parallel directions for response history analysis of buildings

According to the regulatory building codes in the United States (e.g., 2010 California Building Code), at least two horizontal ground motion components are required for three-dimensional (3D) response history analysis (RHA) of building structures. For sites within 5 km of an active fault, these records should be rotated to fault-normal/fault-parallel (FN/FP) directions, and two RHAs should be performed separately (when FN and then FP are aligned with the transverse direction of the structural axes). It is assumed that this approach will lead to two sets of responses that envelope the range of possible responses over all nonredundant rotation angles. This assumption is examined here, for the first time, using a 3D computer model of a six-story reinforced-concrete instrumented building subjected to an ensemble of bidirectional near-fault ground motions. Peak values of engineering demand parameters (EDPs) were computed for rotation angles ranging from 0 through 180° to quantify the difference between peak values of EDPs over all rotation angles and those due to FN/FP direction rotated motions. It is demonstrated that rotating ground motions to FN/FP directions (1) does not always lead to the maximum responses over all angles, (2) does not always envelope the range of possible responses, and (3) does not provide maximum responses for all EDPs simultaneously even if it provides a maximum response for a specific EDP.

Journal of Structural Engineering↗

The Greenland Sea Odden: Intra- and inter-annual variability

The "Odden" is a large sea ice feature that forms in the East Greenland Sea which generally forms at the beginning of the winter season and can cover 300,000 km2. Throughout the winter, the outer edge of the Odden may advance and retreat by several hundred kilometers on time scales of a few days to weeks. Satellite passive microwave observations from 1978 through 1995 provide a continuous record of the spatial and temporal variations of this extremely dynamic phenomenon. The 17 year record shows both strong inter- and intra-annual variations in Odden extent and temporal behavior. An analysis of the satellite passive microwave derived ice area and extent time series along with meteorological data from the Arctic Drifting Buoy Network determined the meteorological forcing required for Odden growth, maintenance and decay. The key meteorological parameters which cause the rapid ice formation and decay associated with the Odden are, in order of importance, air temperature, wind speed, and wind direction. Atmospheric pressure was found not to play a significant role in the Odden events. Air temperature and wind direction are the dominant variables with temperatures below -9.5??C and winds from the west required to trigger significant Odden ice formation events. ??2004 Copyright SPIE - The International Society for Optical Engineering.

Conference Paper↗

Two-dimensional direct-current resistivity survey to supplement borehole data in ground-water models of the former Blaine Naval Ammunition Depot, Hastings, Nebraska, September 2003

The former Blaine Naval Ammunition Depot located immediately southeast of Hastings, Nebraska, was an ammunition facility during World War II and the Korean Conflict. Waste-management practices during operation and decommissioning of the former Depot resulted in soil and ground-water contamination. Ground-water models have been used by the U.S. Army Corps of Engineers to provide information on the fate and transport of contaminants on the former Depot site. During September 2003, the U.S. Geological Survey, in cooperation with the U.S. Army Corps of Engineers, Kansas City District, conducted a pilot study to collect two-dimensional direct-current resistivity data on the site along six profiles near existing monitoring wells. The inversion results of field data from five of the six two-dimensional direct-current resistivity profiles display distinct electrical stratigraphy consistent with three resistivity units (low resistivity, high resistivity, and low resistivity). These three resistivity units correlate with rock-stratigraphic or hydrogeologic units described prior to this study. To interpret the resistivity profiles, additional data extending through the lower confining unit into the underlying Niobrara Formation could be used with the existing data to construct forward models for data analysis and interpretation.

Nebraska↗

Developing ShakeCast statistical fragility analysis framework for rapid post-earthquake assessment

When an earthquake occurs, the U. S. Geological Survey (USGS) ShakeMap estimates the extent of potentially damaging shaking and provides overall information regarding the affected areas. The USGS ShakeCast system is a freely-available, post-earthquake situational awareness application that automatically retrieves earthquake shaking data from ShakeMap, compares intensity measures against users’ facilities, sends notifications of potential damage to responsible parties, and generates facility damage assessment maps and other web-based products for emergency managers and responders. We describe notable improvements of the ShakeMap and the ShakeCast applications. We present a design for comprehensive fragility implementation, integrating spatially-varying ground-motion uncertainties into fragility curves for ShakeCast operations. For each facility, an overall inspection priority (or damage assessment) is assigned on the basis of combined component-based fragility curves using pre-defined logic. While regular ShakeCast users receive overall inspection priority designations for each facility, engineers can access the full fragility analyses for further evaluation.

Conference Paper↗

Shallow landslide hazard map of Seattle, Washington

Landslides, particularly debris flows, have long been a significant cause of damage and destruction to people and property in the Puget Sound region. Following the years of 1996 and 1997, the Federal Emergency Management Agency designated Seattle as a “Project Impact” city with the goal of encouraging the city to become more disaster resistant to landslides and other natural hazards. A major recommendation of the Project Impact council was that the city and the U.S. Geological Survey collaborate to produce a landslide hazard map. An exceptional data set archived by the city containing more than 100 yr of landslide data from severe storm events allowed comparison of actual landslide locations with those predicted by slope-stability modeling. We used an infinite-slope analysis, which models slope segments as rigid friction blocks, to estimate the susceptibility of slopes to debris flows, which are water-laden slurries that can form from shallow failures of soil and weathered bedrock and can travel at high velocities down steep slopes. Data used for the analysis consisted of a digital slope map derived from recent light detection and ranging (LiDAR) imagery of Seattle, recent digital geologic mapping of the city, and shear-strength test data for the geologic units found in the surrounding area. The combination of these data layers within a geographic information system (GIS) platform allowed us to create a shallow landslide hazard map for Seattle.

Washington↗

Recognition of fiducial surfaces in lidar surveys of coastal topography

A new method for the recognition and mapping of surfaces in coastal landscapes that provide accurate and low variability topographic measurements with respect to airborne lidar surveys is described and demonstrated in this paper. Such surfaces are herein termed "fiducial" because they can represent reference baseline morphology in Studies of coastal change due to natural or anthropogenic causes. Non-fiducial surfaces may also be identified in each separate lidar survey to be used in a given geomorphic change analysis. Sites that are non-fiducial in either or both lidar surveys that bracket the time period under investigation may be excluded from consideration in subsequent calculations of survey-to-survey elevation differences to eliminate spurious indications of landscape change. This new analysis method, or lidar fiducial surface recognition (LFSR) algorithm, is intended to more fully enable the non-ambiguous Use of topographic lidar in a range of coastal investigations. The LFSR algorithm may be widely applied, because it is based solely on the information inherent in the USGS/NASA/NOAA airborne topographic lidar coverage that exists for most of the contiguous U.S. coastline.

Photogrammetric Engineering and Remote Sensing↗

Sediment quality and quantity issues related to the restoration of backwater lakes along the Illinois River waterway

Sedimentation has severely impacted backwater lakes along the Illinois River. The State of Illinois and the US Army Corps of Engineers are currently involved in a joint effort to address ecosystem degradation within the Illinois River Basin, and excessive sedimentation of backwater lakes and side channels is a primary cause of that degradation. Necessary parts of the overall restoration effort are to adequately characterize both the quality and quantity of backwater lake sediments prior to implementing any restoration efforts, and to identify potential beneficial reuses of dredged sediments. This paper summarizes some of our efforts in these areas with an emphasis on Peoria Lake which has received the most attention to date. Sediment characterization has included detailed bathymetric surveys, sediment dating with 137 Cs, chemical and mineralogical characterization of sediments to three meters depth, analysis of recent sediments (to 30 cm depth) for acid-volatile sulfide and simultaneously extracted metals, and analysis of ammonia and toxic metals in sediment pore waters. Dredged sediments have also been used in various trial projects to demonstrate potential handling and beneficial reuse strategies. Some significant findings of these studies are: 1) Long-term sedimentation rates are high, and average 1–3 cm y −1 ; 2) total concentrations of several trace metals (e.g., Pb, Cd, Ni) and PAH compounds sometimes exceed consensus-based probable effect levels for sensitive sediment-dwelling organisms; 3) pore water dissolved ammonia concentrations in Peoria Lake are potentially toxic to sensitive sediment-dwelling species; and 4) weathered sediments can make productive agricultural soils.

Illinois River↗

Loss estimates for a Puente Hills blind-thrust earthquake in Los Angeles, California

Based on OpenSHA and HAZUS-MH, we present loss estimates for an earthquake rupture on the recently identified Puente Hills blind-thrust fault beneath Los Angeles. Given a range of possible magnitudes and ground motion models, and presuming a full fault rupture, we estimate the total economic loss to be between $82 and $252 billion. This range is not only considerably higher than a previous estimate of $69 billion, but also implies the event would be the costliest disaster in U.S. history. The analysis has also provided the following predictions: 3,000-18,000 fatalities, 142,000-735,000 displaced households, 42,000-211,000 in need of short-term public shelter, and 30,000-99,000 tons of debris generated. Finally, we show that the choice of ground motion model can be more influential than the earthquake magnitude, and that reducing this epistemic uncertainty (e.g., via model improvement and/or rejection) could reduce the uncertainty of the loss estimates by up to a factor of two. We note that a full Puente Hills fault rupture is a rare event (once every ???3,000 years), and that other seismic sources pose significant risk as well. ?? 2005, Earthquake Engineering Research Institute.

Earthquake Spectra↗

Stochastic model for simulating Souris River Basin precipitation, evapotranspiration, and natural streamflow

The Souris River Basin is a 61,000-square-kilometer basin in the Provinces of Saskatchewan and Manitoba and the State of North Dakota. In May and June of 2011, record-setting rains were seen in the headwater areas of the basin. Emergency spillways of major reservoirs were discharging at full or nearly full capacity, and extensive flooding was seen in numerous downstream communities. To determine the probability of future extreme floods and droughts, the U.S. Geological Survey, in cooperation with the North Dakota State Water Commission, developed a stochastic model for simulating Souris River Basin precipitation, evapotranspiration, and natural (unregulated) streamflow. Simulations from the model can be used in future studies to simulate regulated streamflow, design levees, and other structures; and to complete economic cost/benefit analyses. Long-term climatic variability was analyzed using tree-ring chronologies to hindcast precipitation to the early 1700s and compare recent wet and dry conditions to earlier extreme conditions. The extended precipitation record was consistent with findings from the Devils Lake and Red River of the North Basins (southeast of the Souris River Basin), supporting the idea that regional climatic patterns for many centuries have consisted of alternating wet and dry climate states. A stochastic climate simulation model for precipitation, temperature, and potential evapotranspiration for the Souris River Basin was developed using recorded meteorological data and extended precipitation records provided through tree-ring analysis. A significant climate transition was seen around1970, with 1912–69 representing a dry climate state and 1970–2011 representing a wet climate state. Although there were some distinct subpatterns within the basin, the predominant differences between the two states were higher spring through early fall precipitation and higher spring potential evapotranspiration for the wet compared to the dry state. A water-balance model was developed for simulating monthly natural (unregulated) mean streamflow based on precipitation, temperature, and potential evapotranspiration at select streamflow-gaging stations. The model was calibrated using streamflow data from the U.S. Geological Survey and Environment Canada, along with natural (unregulated) streamflow data from the U.S. Army Corps of Engineers. Correlation coefficients between simulated and natural (unregulated) flows generally were high (greater than 0.8), and the seasonal means and standard deviations of the simulated flows closely matched the means and standard deviations of the natural (unregulated) flows. After calibrating the model for a monthly time step, monthly streamflow for each subbasin was disaggregated into three values per month, or an approximately 10-day time step, and a separate routing model was developed for simulating 10-day streamflow for downstream gages. The stochastic climate simulation model for precipitation, temperature, and potential evapotranspiration was combined with the water-balance model to simulate potential future sequences of 10-day mean streamflow for each of the streamflow-gaging station locations. Flood risk, as determined by equilibrium flow-frequency distributions for the dry (1912–69) and wet (1970–2011) climate states, was considerably higher for the wet state compared to the dry state. Future flood risk will remain high until the wet climate state ends, and for several years after that, because there may be a long lag-time between the return of drier conditions and the onset of a lower soil-moisture storage equilibrium.

Manitoba, North Dakota, Saskatchewan↗

Probabilistic liquefaction triggering based on the cone penetration test

Performance-based earthquake engineering requires a probabilistic treatment of potential failure modes in order to accurately quantify the overall stability of the system. This paper is a summary of the application portions of the probabilistic liquefaction triggering correlations proposed recently proposed by Moss and co-workers. To enable probabilistic treatment of liquefaction triggering, the variables comprising the seismic load and the liquefaction resistance were treated as inherently uncertain. Supporting data from an extensive Cone Penetration Test (CPT)-based liquefaction case history database were used to develop a probabilistic correlation. The methods used to measure the uncertainty of the load and resistance variables, how the interactions of these variables were treated using Bayesian updating, and how reliability analysis was applied to produce curves of equal probability of liquefaction are presented. The normalization for effective overburden stress, the magnitude correlated duration weighting factor, and the non-linear shear mass participation factor used are also discussed.

Conference Paper↗

An inventory of suspended sediment stations and type of data analysis for Pennsylvania streams, 1947-1970

Data concerning suspended sediment concentrations and loads, frequency of occurrence of suspended sediment concentrations, and long-term trends of annual suspended sediment loads are important tools for today's environmental manager. These data are required background for those concerned with establishing and enforcing erosion and sedimentation control regulations and sediment concentration or turbidity standards for water-quality criteria, or those concerned with designing for adequate long-term water storage in reservoirs (sediment load), for efficient municipal and industrial plant operation (sediment concentration frequency), etc. This is a compilation of the location, period of record, sampling frequency and type of data synthesis for suspended sediment carried by Pennsylvania streams. Figures 1 and 2 show the approximate locations of sediment sampling stations in Pennsylvania. All of the sediment data listed were collected by the U. S. Geological Survey mainly in cooperation with the following Federal, State, and local agencies. Pennsylvania Department of Environmental Resources Bureau of Engineering and Construction Soil and Water Conservation Commission Pennsylvania Department of Transportation City of Philadelphia Brandywine Valley Association Delaware Geological Survey Conestoga Valley Association Lehigh County Soil and Water Conservation District Corps of Engineers, U. S. Army

Pennsylvania↗

Evaluation of biodiversity data portals based on requirement analysis

In recent years, concern about the misuse of natural resources has been increasing. It is essential to know in detail the biodiversity of an ecosystem to understand and analyze the impact of human activities on nature, as well as to promote the economic growth of a country. To achieve these goals, public and private institutions are aggregating and sharing biological data around the world by means of biodiversity data portals. The main purpose of those portals is to provide a set of tools that help users and institutions catalog, analyze, and publish raw data about different species in a manner that is open and freely available to any interested party. Normally the process of choosing the best software solution is not straightforward. This paper proposes a methodology to evaluate a collection of data portals to establish a clear and consistent selection process that analyzes a collection of requirements and research purposes. The proposed approach is based on three strategies: the use of software engineering techniques to identify the desired group of features to be available in the data portal; the application of the Kano Satisfaction Model to score each requirement according to a preset weight of importance; and the use of tree-maps to visualize the requirements based on their implementation priority, to establish a portal deployment road-map. The proposed methodology is broadly applicable to portal analyses for many communities of practice.

Ecological Informatics↗

Effect of uncertainty of discharge data on uncertainty of discharge simulation for the Lake Michigan Diversion, northeastern Illinois and northwestern Indiana

Simulation models of watershed hydrology (also referred to as “rainfall-runoff models”) are calibrated to the best available streamflow data, which are typically published discharge time series at the outlet of the watershed. Even after calibration, the model generally cannot replicate the published discharges because of simplifications of the physical system embedded in the model structure and uncertainties of the input data and of the estimated model parameters, which, although optimized for the given calibration data, remain uncertain. The input data errors are caused by uncertainties in the forcing data, such as precipitation and other climatological data, and in the published discharges used for calibration. In the numerical algorithms used for calibration, the published discharges are often assumed to be without error, but they are themselves uncertain, typically having been computed using ratings, which are models fitted to uncertain discharge measurements. In this study, uncertainty of published daily discharge data and how the discharge uncertainty is transmitted to the parameter values of the Hydrological Simulation Program–FORTRAN (HSPF) rainfall-runoff model and to the simulated discharge at both calibration and prediction locations were investigated for the Lake Michigan diversion in northeastern Illinois and northwestern Indiana. The HSPF model used in this study is used by the U.S. Army Corps of Engineers as part of quantifying the diversion of water from Lake Michigan by the State of Illinois. In this study, the model is calibrated jointly at two watersheds in the study area; the resulting model is considered the base model in this study. Seven other gaged watersheds in the study area are used for testing predictive simulations. A Bayesian rating curve estimation (BaRatin) approach, the BaRatin stage-period-discharge (SPD) method, was used to estimate the uncertainty of the published discharge from the calibration watersheds. To characterize the effect of the discharge uncertainty on parameter values, the HSPF model parameters were recalibrated to 17 nonrandomly selected pairs of discharge series from the BaRatin SPD analysis. To provide an indicator of the effect of parameter uncertainty to compare to the effect of discharge uncertainty, 1,000 parameter sets also were randomly generated from the estimated parameter covariance matrix of the base model. The recalibrated and random parameter sets were then used in HSPF simulations of discharge at the two calibration watersheds and at the seven prediction watersheds. Selected discharge summary statistics—the period-of-study (POS, water years 1997 to 2015) mean discharge, selected flow-duration curve (FDC) quantiles, and water year mean discharges—are used to characterize the variability between simulated and published discharge. A normalized variability index ( V N ) is used as a measure of the uncertainty of flow statistics arising from the uncertainty of the sources considered in this study. When this index is at least 1, the variability of the simulations is large enough to explain the median error between simulated and published values, although offsetting errors from other sources are also likely. When the index is appreciably less than 1, the variability of the simulations is clearly insufficient to explain the median error between simulated and published values. At the two calibration watersheds and for results of the two simulation sets considered together, the V N values ranged from 0.2 to 0.8 for POS mean discharge, from 0.3 to 0.6 in the median for a set of FDC quantiles, and from 0.1 to 0.2 in the median for water year mean discharges. These values indicate that substantial uncertainty remains unexplained. Even though two watersheds were used in calibration, that calibration was highly constrained because it was applied to the watersheds simultaneously and was subject to parameter regularization that constrained the adjustment of the parameters from their initial values. These constraints were applied to avoid overfitting to the calibration watersheds and thus to increase the likelihood that the resulting parameters would give accurate results at watersheds not used in the calibration, but they created a parameter transfer error in the calibration watershed results shown by the balancing of errors between the two watersheds. Additional remaining error sources include model structural error and meteorological forcing error to the degree that the calibration was unable to adjust the parameters to account for these errors. At the prediction watersheds, the corresponding V N values were almost always substantially lower than those values at the calibration watersheds. This result is expected because the prediction watersheds have additional uncertainty, including parameter transfer error. The work described in this report provides preliminary estimates of a limited range of sources of error in predicted discharge uncertainty. Future work would be beneficial to obtain a better statistical characterization of the effect of the uncertainty of calibration discharge series and to address additional sources of uncertainty, such as from precipitation input data used in calibration and prediction and from structural (model) errors.

Illinois, Indiana↗

Impact of climate variability on runoff in the north-central United States

Large changes in runoff in the north-central United States have occurred during the past century, with larger floods and increases in runoff tending to occur from the 1970s to the present. The attribution of these changes is a subject of much interest. Long-term precipitation, temperature, and streamflow records were used to compare changes in precipitation and potential evapotranspiration (PET) to changes in runoff within 25 stream basins. The basins studied were organized into four groups, each one representing basins similar in topography, climate, and historic patterns of runoff. Precipitation, PET, and runoff data were adjusted for near-decadal scale variability to examine longer-term changes. A nonlinear water-balance analysis shows that changes in precipitation and PET explain the majority of multidecadal spatial/temporal variability of runoff and flood magnitudes, with precipitation being the dominant driver. Historical changes in climate and runoff in the region appear to be more consistent with complex transient shifts in seasonal climatic conditions than with gradual climate change. A portion of the unexplained variability likely stems from land-use change.

Iowa, Kansas, Minnesota, Missouri, Nebraska, North↗

Intraband radiometric performance of the Landsat Thematic Mappers.

Radiometric characteristics have been examined of the Landsat-4 and Landsat-5 Thematic Mappers (TMs) that can be established without absolute calibration of spectral data. This analysis is based on radiometrically and geometrically raw (B-type) data of both uniform (flat-field) and high-contrast scenes. Subscenes selected for uniform radiance were used to characterized subtle radiometric differences and noise problems. Although the general performance of the Thematic Mappers is excellent, various anomalies that have a magnitude of a few digital levels (DN) or less are quantified. -from Authors

Photogrammetric Engineering and Remote Sensing↗

Field and office instructions in stream gauging for the Hydrological Survey of Zambia

The importance of water to the basic needs of man is self- evident and needs no particular emphasis. The importance of water to a developing economy cannot be overemphasized. A few decades ago, hydrology was a division of hydraulic engineering and was a tool for project survey, plan, and design. Today hydrology still remains an important part of planning and management of water use projects, but it is imperative that surface and ground-water basic data networks be designed and operated from the standpoint of both present and future water needs. Water problems are ever increasing and ever changing and preparation for the future water demands of Zambia requires knowledge of the hydrology of the country instead of the examination of piecemeal samples for each water use project. The hydrologic survey of Zambia needs to be under the guidance of competent and imaginative hydrologists solidly trained in all elements of basic data collection and analysis and not in the hands of water project planners. Hydrology is a science which requires the highest order of teamwork and the hydrologist will need the help and advice of many employees within the organization to operate the network, provide adequate research, and examine the water needs of the country. It must be thoroughly understood that communication is essential between the hydrological survey and water project planners from both the government and private sectors. It is very important to define the aims and duties of the Hydrological Branch of the Water Affairs Department in a clear cut "Statement of Policy". Personal copies of the statement should be made available to all professional employees and technicians. The reasons for the existence of the Branch may be self-apparent to heads of the organization, but to all other employees the reasons may be vague and unknown. Every member of the technical and administrative staff would benefit by an understanding of the purpose of his work. Nebulous ideas of the function of a hydrological survey of Zambia serve little purpose to the employee making the plans or those who execute them. A dissemination and free flow of ideas in all directions is necessary in any scientific and creative organization. The primary functions of the Hydrological Branch of the Water Affairs Department of Zambia are twofold: Water resource appraisal which includes the inventory of all surface and ground waters; Research, both basic and applied, in the science of water. Possibly some function regarding water law is also conceivable, although attachment of a law enforcement function to water-resource investigations might weaken the position of the Branch as an unbiased scientific organization. As the collection of basic streamflow data is a primary function of the Branch the following instructions for the collection, analysis and computation of streamflow records have been written.

Open-File Report↗

Evolution of design ground motions in California: NEHRP 2009 to 2020

The U.S. Geological Survey (USGS) National Seismic Hazard Model (NSHM) is used in construction codes, such as the National Earthquake Hazard Reduction Program (NEHRP) Provisions, to develop ground motions for structural and geotechnical design. When the NSHM is updated (e.g. changes to its earthquake rupture forecast or ground motion models), or the manner in which it is implemented in construction codes changes, design ground motion values can increase or decrease at a given location. This study presents an analysis of 21 sites in California to characterize how design ground motion values (SS, S1, SMS, SM1) have changed from the 2009 to 2015 to 2020 NEHRP Provisions. Four sites are presented in greater detail: two in Southern California and two in Northern California. The results show that significant changes in design ground motion values between NEHRP releases are explained by major changes in the NSHM science (e.g., inclusion of basin effects) and its use (e.g., for a broader range of site classes), but in ways that are difficult to ascertain beforehand. It is therefore likely that design ground motion values may continue to evolve between NSHM and construction code updates as the earthquake science and engineering field's understanding continues to advance.

California↗