SEARCH · USGS Science

Results for “Earth Observer”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 865 records · Page 48Linked to original sources

USGS2011

Interdisciplinary studies of eruption at Chaitén volcano, Chile

High-silica rhyolite magma fuels Earth's largest and most explosive eruptions. Recurrence intervals for such highly explosive eruptions are in the 100- to 100,000-year time range, and there have been few direct observations of such eruptions and their immediate impacts. Consequently, there was keen interest within the volcanology community when the first large eruption of high-silica rhyolite since that of Alaska's Novarupta volcano in 1912 began on 1 May 2008 at Chaitén volcano, southern Chile, a 3-kilometer-diameter caldera volcano with a prehistoric record of rhyolite eruptions [ Naranjo and Stern, 2004semi; Servicio Nacional de Geología y Minería (SERNAGEOMIN), 2008semi; Carn et al., 2009; Castro and Dingwell, 2009; Lara, 2009; Muñoz et al., 2009 ]. Vigorous explosions occurred through 8 May 2008, after which explosive activity waned and a new lava dome was extruded.

Eos, Transactions, American Geophysical Union↗

USGS2012

Strain accumulation across the Wasatch Fault near Ogden, Utah

Deformation of a 70 by 40‐km trilateration network spanning the north trending Wasatch fault near Ogden, Utah, has been monitored from 1972 through 1990. All but nine of the 200 measurements are consistent with deformation that is linear in time. We presume that those nine observations are contaminated by some blunder in making the measurements and that deformation is linear in time. The strain rate over the 1972–1990 interval across a 40‐km‐wide zone west of the Wasatch fault (hanging wall block) is adequately approximated by a 0.04 ± 0.01 μstrain/yr N85°E±5° uniaxial extension. Adequate coverage of the footwall block is available only over the 1981–1990 interval, and the strain rate across a 30‐km‐wide zone there is approximated by a 0.07 ± 0.03 μstrain/yr N20°E±12° uniaxial extension. The observed extension of the hanging wall block in the direction normal to fault strike suggests that the Wasatch fault may be listric; a planar fault would produce a zone of contraction normal to the fault at the surface of the hanging wall block. The component of extension parallel to fault strike observed on the footwall block is unexplained.

Utah↗

USGS2012

Elastic moduli of rock glasses under pressure to 8 kilobars and geophysical implications

Shear and longitudinal velocities were measured by the ultrasonic phase comparison method as a function of pressure to 8 kbar on synthetic glasses of basalt, andesite, rhyolite, and quartz composition and on natural obsidian. Velocities of most of the glasses decrease anomalously with pressure, but increasingly more-normal behavior occurs with decrease in SiO 2 content. The pressure derivatives of rigidity and bulk modulus increase linearly, from −3.39 to −0.26 and from −5.91 to +2.09, respectively, with decrease in SiO 2 content from 100 to 49%. The change from negative to positive in the pressure derivatives of both moduli and observed at Poisson's ratio of about 0.25 is consistent with the Smyth model for the anomalous elastic behavior of glass. If the temperature in the upper mantle is about 1500°C, tholeiitic basalt would be molten in accordance with the partial melt explanation for the low-velocity zone; at 1300°C and below, basalt would be in the glassy state, especially if more felsic than tholeiite. At a temperature of 1370°C and at 30 kbar, reasonable values for the upper mantle at 100 km depth, the basalt glass of this study would have a viscosity of about 10 13 P. On the basis of the theory of viscoelasticity the glass would support shear wave propagation at frequencies above 0.1 Hz. Under such conditions of PT, 10 to 30% basalt glass in a matrix either of eclogite or olivine would reduce the seismic velocities by 3 to 9% and could also account for the values observed in the low-velocity zone.

Journal of Geophysical Research Solid Earth↗

USGS2005

Evidence for magmatic evolution and diversity on Mars from infrared observations

Compositional mapping of Mars at the 100-metre scale with the Mars Odyssey Thermal Emission Imaging System (THEMIS) has revealed a wide diversity of igneous materials. Volcanic evolution produced compositions from low-silica basalts to high-silica dacite in the Syrtis Major caldera. The existence of dacite demonstrates that highly evolved lavas have been produced, at least locally, by magma evolution through fractional crystallization. Olivine basalts are observed on crater floors and in layers exposed in canyon walls up to 4.5 km beneath the surface. This vertical distribution suggests that olivine-rich lavas were emplaced at various times throughout the formation of the upper crust, with their growing inventory suggesting that such ultramafic (picritic) basalts may be relatively common. Quartz-bearing granitoid rocks have also been discovered, demonstrating that extreme differentiation has occurred. These observations show that the martian crust, while dominated by basalt, contains a diversity of igneous materials whose range in composition from picritic basalts to granitoids rivals that found on the Earth.

Nature↗

USGS2018

Dryland photoautotrophic soil surface communities endangered by global change

Photoautotrophic surface communities forming biological soil crusts (biocrusts) are crucial for soil stability as well as water, nutrient and trace gas cycling at regional and global scales. Quantitative information on their global coverage and the environmental factors driving their distribution patterns, however, are not readily available. We use observations and environmental modelling to estimate the global distribution of biocrusts and their response to global change using future projected scenarios. We find that biocrusts currently covering approximately 12% of Earth’s terrestrial surface will decrease by about 25–40% within 65 years due to anthropogenically caused climate change and land-use intensification, responding far more drastically than vascular plants. Our results illustrate that current biocrust occurrence is mainly driven by a combination of precipitation, temperature and land management, and future changes are expected to be affected by land-use and climate change in similar proportion. The predicted loss of biocrusts may substantially reduce the microbial contribution to nitrogen cycling and enhance the emissions of soil dust, which affects the functioning of ecosystems as well as human health and should be considered in the modelling, mitigation and management of global change.

Nature Geoscience↗

USGS1976

Search for the Viking 2 landing site

The search for the landing site of Viking 2 was more extensive than the search for the Viking 1 site. Seven times as much area (4.5 million square kilometers) was examined as for Viking 1. Cydonia (B1) and Capri (C1) sites were examined with the Viking 1 orbiter. The B latitude band (40° to 50°N) was selected before the final midcourse maneuver of Viking 2 because of its high scientific interest (that is, high atmospheric water content, surface temperature, possible near-surface permafrost, and a different geological domain). The Viking 1 orbiter continued photographing the Cydonia (B1) site to search for an area large and smooth enough on which to land (three-sigma ellipse; 100 by 260 kilometers); such an area was not found. The second spacecraft photographed and made infrared measurements in large areas in Arcadia (B2) and Utopia Planitia (B3). Both areas are highly textured, mottled cratered plains with abundant impact craters like Cydonia (B1), but smaller sectors in each area are partially mantled by wind-formed deposits. The thermal inertia, from which the grain size of surface material can be computed, and atmospheric water content were determined from the infrared observations. A region in Utopia Planitia, west of the crater Mie, was selected: the landing took place successfully on 3 September 1976 at 3:58:20 p.m. Pacific Daylight Time, earth received time.

Science↗

USGS2024

Testing tree-ring cellulose δ18O with water isotopes for Holocene lake δ18O interpretations in the central Rocky Mountains USA

Stable isotopes of water preserved in geologic archives, primarily as oxygen (δ18O), have proven critical for documenting Earth’s climatic and hydrologic systems past and present. However, timescale differences of water isotope inputs to proxy systems and the signal embedded in long paleorecords often confound translation to observed hydroclimatic metrics. Here, a unique 20-year dataset of meteorology, hydrology, and the isotopic composition of weekly meteoric and surface water samples (δ18O, δ2 H) are combined with paleoclimate δ18O data from tree-ring cellulose and lake carbonate to better understand proxy signals of Upper Colorado river basin drought. Annual tree-ring cellulose δ18O from Picea engelmannii growing within a glacier-fed creek and a spring discharge area were used to derive annual source water δ18O using a cellulose source-water isotope model. Comparisons with the monitoring record indicates that tree-ring cellulose δ18O tracks variations in wet and dry hydroclimatic extremes. Source water isotopes are shown to reflect the hydroclimate of the current year and some number of previous years as an effective moisture-discharge proxy rather than a precipitation isotope proxy. Results contextualize Holocene lake carbonate δ18O data. The contemporary-to-paleo comparison identifies changes in seasonal precipitation extremes during recent millennia and several earlier arid and monsoon-dominated Holocene periods that exceed the arid maximum of the calibration period.

Colorado↗

USGS2026

Special issue “The 2024 M7.6 Noto Peninsula earthquake and seismic swarm”

The 2024 Mw7.5 (M JMA 7.6) Noto Peninsula earthquake struck the Noto Peninsula, central Japan on January 1, 2024, causing widespread damage. This Mw7.5 mainshock, together with the prolonged seismic swarm that persisted in the northeastern Noto Peninsula since the end of 2020, of which the largest event was the 2023 M JMA 6.5 earthquake, constitutes one of the most significant seismic sequences in Japan in recent decades. The sequence provides a rare opportunity to investigate the complex interplay among swarm activity, fluid migration, fault geometry and distribution, and the preparatory conditions required for a large inland crustal earthquake. Motivated by this scientific context, this special issue brings together studies examining the sequence from diverse disciplinary perspectives, incorporating seismic, geodetic, and tsunami-related observations and modelling.

Noto Peninsula↗

USGS2010

On possible plume-guided seismic waves

Hypothetical thermal plumes in the Earth's mantle are expected to have low seismic-wave speeds and thus would support the propagation of guided elastic waves analogous to fault-zone guided seismic waves, fiber-optic waves, and acoustic waves in the oceanic SOund Fixing And Ranging channel. Plume-guided waves would be insensitive to geometric complexities in the wave guide, and their dispersion would make them distinctive on seismograms and would provide information about wave-guide structure that would complement seismic tomography. Detecting such waves would constitute strong evidence of a new kind for the existence of plumes. A cylindrical channel embedded in an infinite medium supports two classes of axially symmetric elastic-wave modes, torsional and longitudinal-radial. Torsional modes have rectilinear particle motion tangent to the cylinder surface. Longitudinal-radial modes have elliptical particle motion in planes that include the cylinder axis, with retrograde motion near the axis. The direction of elliptical particle motion reverses with distance from the axis: once for the fundamental mode, twice for the first overtone, and so on. Each mode exists only above its cut-off frequency, where the phase and group speeds equal the shear-wave speed in the infinite medium. At high frequencies, both speeds approach the shear-wave speed in the channel. All modes have minima in their group speeds, which produce Airy phases on seismograms. For shear wave-speed contrasts of a few percent, thought to be realistic for thermal plumes in the Earth, the largest signals are inversely dispersed and have dominant frequencies of about 0.1-1 Hz and durations of 15-30 sec. There are at least two possible sources of observable plume waves: (1) the intersection of mantle plumes with high-amplitude core-phase caustics in the deep mantle; and (2) ScS-like reflection at the core-mantle boundary of downward-propagating guided waves. The widespread recent deployment of broadband seismometers makes searching for these waves possible.

Bulletin of the Seismological Society of America↗

USGS2021

Zirconium-bearing accessory minerals in UK Paleogene granites: Textural, compositional, and paragenetic relationships

The mineral occurrences, parageneses, textures, and compositions of Zr-bearing accessory minerals in a suite of UK Paleogene granites from Scotland and Northern Ireland are described. Baddeleyite, zirconolite, and zircon, in that sequence, formed in hornblende + biotite granites (type 1) and hedenbergite–fayalite granites (type 2). The peralkaline microgranite (type 3) of Ailsa Craig contains zircon, dalyite, a eudialyte-group mineral, a fibrous phase which is possibly lemoynite, and Zr-bearing aegirine. Hydrothermal zircon is also present in all three granite types and documents the transition from a silicate-melt environment to an incompatible element-rich aqueous-dominated fluid. No textures indicative of inherited zircon were observed. The minerals crystallized in stages from magmatic through late-magmatic to hydrothermal. The zirconolite and eudialyte-group mineral are notably Y + REE-rich (REE signifies rare earth element). The crystallization sequence of the minerals may have been related to the activities of Si and Ca, to melt peralkalinity, and to local disequilibrium.

European Journal of Mineralogy↗

USGS2003

Landsat: A Global Land-Observing Program

Landsat represents the world's longest continuously acquired collection of space-based land remote sensing data. The Landsat Project is a joint initiative of the U.S. Geological Survey (USGS) and the National Aeronautics and Space Administration (NASA) designed to gather Earth resource data from space. NASA developed and launched the spacecrafts, while the USGS handles the operations, maintenance, and management of all ground data reception, processing, archiving, product generation, and distribution.

Fact Sheet↗

USGS2016

Volcano deformation source parameters estimated from InSAR: Sensitivities to uncertainties in seismic tomography

The eruption cycle of a volcano is controlled in part by the upward migration of magma. The characteristics of the magma flux produce a deformation signature at the Earth's surface. Inverse analyses use geodetic data to estimate strategic controlling parameters that describe the position and pressurization of a magma chamber at depth. The specific distribution of material properties controls how observed surface deformation translates to source parameter estimates. Seismic tomography models describe the spatial distributions of material properties that are necessary for accurate models of volcano deformation. This study investigates how uncertainties in seismic tomography models propagate into variations in the estimates of volcano deformation source parameters inverted from geodetic data. We conduct finite element model-based nonlinear inverse analyses of interferometric synthetic aperture radar (InSAR) data for Okmok volcano, Alaska, as an example. We then analyze the estimated parameters and their uncertainties to characterize the magma chamber. Analyses are performed separately for models simulating a pressurized chamber embedded in a homogeneous domain as well as for a domain having a heterogeneous distribution of material properties according to seismic tomography. The estimated depth of the source is sensitive to the distribution of material properties. The estimated depths for the homogeneous and heterogeneous domains are 2666 ± 42 and 3527 ± 56 m below mean sea level, respectively (99% confidence). A Monte Carlo analysis indicates that uncertainties of the seismic tomography cannot account for this discrepancy at the 99% confidence level. Accounting for the spatial distribution of elastic properties according to seismic tomography significantly improves the fit of the deformation model predictions and significantly influences estimates for parameters that describe the location of a pressurized magma chamber.

Journal of Geophysical Research B: Solid Earth↗

USGS2005

Origin of secondary sulfate minerals on active andesitic stratovolcanoes

Sulfate minerals in altered rocks on the upper flanks and summits of active andesitic stratovolcanoes result from multiple processes. The origin of these sulfates at five active volcanoes, Citlalte??petl (Mexico), and Mount Adams, Hood, Rainier, and Shasta (Cascade Range, USA), was investigated using field observations, petrography, mineralogy, chemical modeling, and stable-isotope data. The four general groups of sulfate minerals identified are: (1) alunite group, (2) jarosite group, (3) readily soluble Fe- and Al-hydroxysulfates, and (4) simple alkaline-earth sulfates such as anhydrite, gypsum, and barite. Generalized assemblages of spatially associated secondary minerals were recognized: (1) alunite+silica??pyrite??kaolinite?? gypsum??sulfur, (2) jarosite+alunite+silica; (3) jarosite+smectite+silica??pyrite, (4) Fe- and Al-hydroxysulfates+silica, and (5) simple sulfates+silica??Al-hydroxysulfates??alunite. Isotopic data verify that all sulfate and sulfide minerals and their associated alteration assemblages result largely from the introduction of sulfur-bearing magmatic gases into meteoric water in the upper levels of the volcanoes. The sulfur and oxygen isotopic data for all minerals indicate the general mixing of aqueous sulfate derived from deep (largely disproportionation of SO2 in magmatic vapor) and shallow (oxidation of pyrite or H2S) sources. The hydrogen and oxygen isotopic data of alunite indicate the mixing of magmatic and meteoric fluids. Some alunite-group minerals, along with kaolinite, formed from sulfuric acid created by the disproportionation of SO2 in a condensing magmatic vapor. Such alunite, observed only in those volcanoes whose interiors are exposed by erosion or edifice collapse, may have ??34S values that reflect equilibrium (350??50 ??C) between aqueous sulfate and H2S. Alunite with ??34S values indicating disequilibrium between parent aqueous sulfate and H2S may form from aqueous sulfate created in higher level low-temperature environments in which SO2 is scrubbed out by groundwater or where H2S is oxidized. Jarosite-group minerals associated with smectite in only slightly altered volcanic rock are formed largely from aqueous sulfate derived from supergene oxidation of hydrothermal pyrite above the water table. Soluble Al- and Fehydroxysulfates form in low-pH surface environments, especially around fumaroles, and from the oxidation of hydrothermal pyrite. Anhydrite/gypsum, often associated with native sulfur and occasionally with small amounts of barite, also commonly form around fumaroles. Some occurrences of anhydrite/gypsum may be secondary, derived from the dissolution and reprecipitation of soluble sulfate. Edifice collapse may also reveal deep veins of anhydrite/gypsum??barite that formed from the mixing of saline fluids with magmatic sulfate and dilute meteoric water. Alteration along structures associated with both hydrothermal and supergene sulfates, as well as the position of paleo-water tables, may be important factors in edifice collapse and resulting debris flows at some volcanoes. ?? 2004 Elsevier B.V. All rights reserved.

Chemical Geology↗

USGS2020

Observations and recommendations for coordinated calibration activities of government and commercial optical satellite systems

One of the biggest changes in the world of optical remote sensing over the last several years is the sheer increase in the number of sensors that are imaging the Earth in moderate to high spatial resolution. With respect to the calibration of these sensors, they are broadly classified into two types, namely government systems and commercial systems. Because of the differences in the design and mission of these sensor types, calibration approaches are often substantially different. Thus, an opportunity exists to foster discussion between calibration teams for these sensors with the goal of improving overall sensor calibration and data interoperability. The approach used to accomplish this task was a one-day workshop where team members from both government and commercial sensors could share best practices, discuss methods for collaboration and improvement, and make recommendations for continuing activities. Five major recommendations were developed from the event that focused on coordinated activities using pseudo invariant calibration sites (PICS), broader and more consistent communication, collaboration on specific cross-calibration opportunities, developing a reference sensor for all optical systems, and encouraging the coordinated development of surface reflectance products. Workshop participants concluded that regular interactions between these teams could foster a better calibration of all sensor systems and accelerate the improved interoperability of surface products.

Remote Sensing↗

USGS2007

Coseismic and post-seismic signatures of the Sumatra 2004 December and 2005 March earthquakes in GRACE satellite gravity

The GRACE satellite mission has been measuring the Earth's gravity field and its temporal variations since 2002 April. Although these variations are mainly due to mass transfer within the geofluid envelops, they also result from mass displacements associated with phenomena including glacial isostatic adjustment and earthquakes. However, these last contributions are difficult to isolate because of the presence of noise and of geofluid signals, and because of GRACE's coarse spatial resolution (>400 km half-wavelength). In this paper, we show that a wavelet analysis on the sphere helps to retrieve earthquake signatures from GRACE geoid products. Using a wavelet analysis of GRACE geoids products, we show that the geoid variations caused by the 2004 December ( M w = 9.2) and 2005 March ( M w = 8.7) Sumatra earthquakes can be detected. At GRACE resolution, the 2004 December earthquake produced a strong coseismic decrease of the gravity field in the Andaman Sea, followed by relaxation in the area affected by both the Andaman 2004 and the Nias 2005 earthquakes. We find two characteristic timescales for the relaxation, with a fast variation occurring in the vicinity of the Central Andaman ridge. We discuss our coseismic observations in terms of density changes of crustal and upper-mantle rocks, and of the vertical displacements in the Andaman Sea. We interpret the post-seismic signal in terms of the viscoelastic response of the Earth's mantle. The transient component of the relaxation may indicate the presence of hot, viscous material beneath the active Central Andaman Basin.

Geophysical Journal International↗

USGS2016

Special section introduction on MicroMars to MegaMars

The study of Earth's surface and atmosphere evolved from local investigations to the incorporation of remote sensing on a global scale. The study of Mars has followed the opposite progression, beginning with telescopic observations, followed by flyby and orbital missions, landers, and finally rover missions in the last ∼20 years. This varied fleet of spacecraft (seven of which are currently operating as of this writing) provides a rich variety of datasets at spatial scales ranging from microscopic images to synoptic orbital remote sensing.

Icarus↗

USGS1997

The modern atmospheric background dust load: Recognition in Central Asian snowpack, and compositional constraints

Dusts in strata of snowpack in the Alai-Pamir range, Kirghizstan, Central Asia, have chemical compositions that are in the same restricted range as those of the dusts found in snowpacks at three other locations: central south Greenland, the St. Elias range (Alaska), and coastal Antarctica, where special-type local dust sources certainly cannot dominate. This similarity at the four widely separated sites appears to indicate that there is a modern atmospheric background dust that is the same on a regional, hemispheric, or global scale. The common compositional range is that of average crustal rock, or of moderately ferromagnesian volcanic rock. It is not that of carbonate, nor highly siliciceous rocks. Previously, the existence of an atmospheric background dust has been postulated only on the basis of its particle size distribution, and only from observations in polar regions. The present study partially determines the chemical composition of the background dust, and confirms its existence in snowpack at four localities worldwide, including the center of the earth's largest continent where dusts of local source have considerable influence.

Geophysical Research Letters↗

USGS2021

Electrical conductivity of the lithosphere-asthenosphere system

Electromagnetic geophysical methods image the electrical conductivity of the subsurface. Electrical conductivity is an intrinsic material property that is sensitive to temperature, composition, porosity, volatile and/or melt content, and other physical properties relevant to the solid Earth. Therefore, imaging the electrical structure of the crust and mantle yields valuable information on the physical and chemical state of the lithosphere-asthenosphere system. Here we explore the viability of the passive magnetotelluric (MT) method for constraining upper mantle properties. We approach this problem in four successive steps: 1) review the electrical conductivity behavior of relevant materials; 2) predict the bulk electrical conductivity structure of oceanic and continental lithosphere for a suite of representative physical states; 3) generate synthetic MT data from the conductivity predictions; 4) compare and discuss the conductivity predictions and the synthetic data with select case studies from oceanic and continental settings. Our aim is to clarify the uncertainties associated with drawing inferences from electrical conductivity observations and ultimately to provide a basis for assigning confidence levels to interpretations.

Physics of the Earth and Planetary Interiors↗