USGS Science⌕ Search

SEARCH · USGS Science

Results for “Data Report”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

1,150 records · Page 48Linked to original sources
USGS2025

Geochemistry and radiogenic isotopes constrain the mantle source region of the Mountain Pass Intrusive Suite, California

The Mountain Pass carbonatite stock is the largest rare earth element (REE) deposit and only active REE mine in the United States. The carbonatite intrusion and spatially associated alkaline silicate intrusions constitute the Mountain Pass Intrusive Suite, which is located within the Mojave Province in California. Both the carbonatite and the alkaline silicate rocks are enriched in large ion lithophile elements and light REEs, and less enriched to depleted in high field strength elements, indicating the mantle source region was metasomatically enriched in incompatible trace elements. The cause of this metasomatic mantle enrichment and the genetic relationship between the carbonatite and the alkaline silicate stocks are poorly understood. In this study, major and trace element geochemical data and isotopic (Rb-Sr, Sm-Nd, and Lu-Hf) data are presented to constrain genesis of the Mountain Pass Intrusive Suite, from mantle source region to the intrusion of the stocks. Our geochemical data are consistent with derivation of the alkaline silicate and carbonatite melts through partial melting from a shared mantle source region rather than through liquid immiscibility or fractional crystallization and separation of a carbothermal fluid. Although the Rb-Sr isotopic system in the Mountain Pass Intrusive Suite is disturbed at the whole-rock scale, the isotopic systems for whole-rock Sm-Nd (εNd i = ‐2.2 ± 0.8) and zircon Lu-Hf (εHf i = 0.1 ± 1.1) are robust and support mantle derivation of the magmas. Geochemical modeling using experimentally derived partition coefficients was used to identify possible causes of enrichment in incompatible elements through metasomatism in the mantle source region. Modeling of metasomatism by melts derived by partial melting of deeply subducted carbonated sediments approximates observed Mountain Pass Intrusive Suite trace element chemistry. Scattered εHf i in inherited zircon (2.8 ± 2.6) is consistent with derivation from an arc-related environment with substantial crustal contamination. Paleotectonic studies in the Mojave Province indicate that regional subduction preceded emplacement of the Mountain Pass Intrusive Suite by ∼300 Ma. Melting of the Mountain Pass source region may have been caused by post-collisional thermal relaxation and extension.

California↗
USGS2026

CRESCENT earthquake dynamic rupture, earthquake cycle, and tsunami code verification platform

Physics-based simulations are critical for understanding natural hazards. The increasing complexity of numerical codes requires benchmark exercises to verify that different computational methods yield consistent results when solving the same governing equations. Here, we present an open-access web platform designed for the verification of earthquake dynamic rupture, seismic cycle, and tsunami simulations. The platform architecture utilizes a modular, serverless backend on Amazon Web Services (AWS) to provide scalable file processing and visualization. A lightweight static web application provides a secure interface for uploading and managing results, while the browser-based data visualization enables interactive analysis of time series and surface grid data. By using structured JavaScript Object Notation (JSON) text files to define benchmark structures, the system remains fully extensible, allowing the addition of new scenarios without modifying the underlying software logic. The platform hosts the "The Tsunami Problem Versions" (TTPV) 1 & 2, two benchmarks for 3D fully coupled earthquake dynamic rupture and tsunami generation, and provides a framework for earthquake cycle models. This community resource aims to build trust in numerical simulations and facilitate long-term collaborative code verification as modeling software continues to evolve.

Seismica↗
USGS2025

Near-surface geophysics: Environmental applications

The field of geophysics encompasses a broad and diverse compilation of methodologies that employs principles of physics to characterize properties of earth materials within the subsurface. While geophysical methods have a long history in resource exploration and studies of Earth’s interior, the subdiscipline of “near-surface geophysics” has evolved in recent decades for examination of the shallow, near-surface environment for a range of purposes ranging from archaeological or forensic investigations to assessment of geologic, hydrologic, biologic, and geochemical properties and processes. “Environmental geophysics” are near-surface geophysical studies and methods that focus on understanding natural systems (e.g., watershed hydrology, groundwater–surface water connections, biophysical processes) as well as research pertaining to anthropogenic impacts and land management, (e.g., contamination and remediation, saltwater intrusion, agricultural practices). This field can be further subdivided into subdisciplines focused on specific topics and applications, such as water resources and hydrology (hydrogeophysics) or biologic and microbial processes (biogeophysics). Studies in environmental geophysics span a range of scales, from pore-scale laboratory tests to watershed-scale or regional field experiments. Methods vary by the nature of physics employed, the specific measurement acquired, and how that data is ultimately processed and analyzed to produce interpretable results. There exists further diversity in the acquisition logistics, geometry, and timing of data collection. Geophysical data can be collected in boreholes (one-dimensional, 1-D, vertical profiles), along survey lines (two-dimensional, 2-D, cross-sections), or in dense sensor arrays or gridded profiles (three-dimensional, 3-D, models). Regarding the temporal aspect, studies can conduct one-time geophysical surveys to obtain detailed imaging of subsurface structure or use timelapse and continuous monitoring to investigate variations in subsurface properties over time. The cumulation of all possible permutations of these factors (method, acquisition geometry, survey design, and target application) results in an immense diversity among environmental geophysical studies. Nevertheless, this field remains unified in the pursuit of understanding natural and human-impacted near-surface environments through geophysical investigations. Here we highlight some key references within environmental geophysics. Resources on geophysical theory, acquisition logistics, processing and inversion workflows, and example case studies are categorized into the most common geophysical classes within Geophysical Methods. Lastly, example references for the dominant types of applications in environmental geophysical studies are catalogued in Environmental Applications.

Book chapter↗
USGS2026

Inference of pattern-based geological CO2 sequestration and oil recovery potential in a commingled main pay and residual oil zone CO2-EOR flood

Several detailed studies have shown that residual oil zones (ROZs) can present significant resources for additional hydrocarbon recovery as well as subsurface carbon dioxide (CO 2 ) sequestration via enhanced oil recovery by injecting CO 2 (CO 2 -EOR). Field development strategies included new wells drilled dedicated to main pay zones (MPZ) and ROZs, or existing wells in MPZs deepened to ROZs for commingled injection-production using different well patterns. The latter presented a challenge when discerning the injection and production from each of the zones, and for subsequent quantification of CO 2 sequestration and EOR potential from different patterns and from the field. In this paper, an innovative method for analyzing commingled injections and productions from MPZs and ROZs, with application to pattern-based data from four staggered line drive patterns in Wasson Field's Denver Unit, Texas, USA, was developed. Decline curve and ratio-trend methods were used as means of history-matching and forecasting. Cumulative production-time and cumulative production-rate data for oil, gas, and water, as well as water-oil ratio (WOR) and gas-oil ratio (GOR), were analyzed along with injection data for time intervals covering major injection events in MPZ, or MPZ and ROZ combined. A combined analysis enabled inference of allocation of fluids into different zones during WAG (water alternating gas) injection and thereby estimation of CO 2 storage, utilization, and retention in different zones as a function of total injection. Results show that ROZs generally present higher CO 2 sequestration potential compared to MPZs, and a comparable incremental oil recovery factor of ∼20%, on average. Results based on ratio analysis further show that while the WOR trend of the pattern production is mostly dominated and controlled by ROZ, GOR is controlled by both intervals. Although the method relying on decline curves and the approach used in zonal fluid allocations are subject to their limitations, this study presents a practical and innovative well-pattern-based method to infer and forecast CO 2 sequestration and oil recovery quantities and fluid ratios from MPZs and ROZs in commingled operations and highlight the added potential offered by ROZs.

Texas↗
USGS2025

Tracing mercury from land to river: Global sources, retention, and implications for sustainability

Mercury (Hg) pollution in river systems is a global sustainability challenge. Yet the transport, transformation, and retention of Hg within global rivers remain poorly quantified, particularly in regions with sparse observations such as Southeast Asia and Africa, hindering effective pollution mitigation and reinforcing geographic inequities in scientific knowledge and environmental governance. Here, we present the first global, high-resolution simulation of riverine Hg dynamics using a process-based model that traces Hg from land-based sources through river networks to the ocean. Under a realistic scenario, we estimate that ~1,900 megagrams per year (Mg/yr) of Hg enters global rivers, including 1,500 Mg/yr from human-induced sources and 400 Mg/yr from soil erosion. Nearly half of this flux (~1,000 Mg/yr) is retained in reservoirs and dams, which act as major sinks. While such retention limits downstream delivery to the oceans, it also heightens in-reservoir Hg methylation risks. By bridging the gap between Hg releases and observed riverine exports, our framework offers a scalable tool for data-limited regions, promotes data access, and supports global freshwater and pollution-management strategies.

EarthArXiv↗
USGS2025

An unexplained tsunami: Was there megathrust slip during the 2020 Mw7.6 Sand Point, Alaska, earthquake?

On October 19, 2020, the M w 7.6 Sand Point earthquake struck south of the Shumagin Islands in Alaska. Moment tensors indicate the earthquake was primarily strike-slip, yet the event produced an enigmatic tsunami that was larger and more widespread than expected for an earthquake of that magnitude and mechanism. Using a suite of hydrodynamic, seismic, and geodetic modeling techniques, we explore plausible causes of the tsunami. We find that strike-slip models consistent with the moment tensor orientation cannot produce the observed tsunami. Hydrodynamic inversion of sea surface deformation from deep ocean and tide gauge data suggest seafloor deformation more closely matches a megathrust, rather than a strike-slip, source. Static slip inversions, using sea level and Global Navigation Satellite System data, allow for a portion of co-seismic megathrust slip that can explain tsunamigenesis. Combining all available geophysical datasets to model the kinematic rupture, we show that considerable, relatively slow, megathrust slip is allowable in the Shumagin segment, concurrent with strike-slip faulting. We hypothesize that the slow megathrust rupture does not contribute much seismic radiation allowing it to previously go unnoticed with traditional seismic monitoring.

Alaska↗
USGS2026

Tracing mercury from land to river: Global sources, retention, and implications for sustainability

Mercury (Hg) pollution in river systems is a global sustainability challenge. Yet the transport, transformation, and retention of Hg within global rivers remain poorly quantified, particularly in regions with sparse observations such as Southeast Asia and Africa, hindering effective pollution mitigation and reinforcing geographic inequities in scientific knowledge and environmental governance. Here, we present the first global, high-resolution simulation of riverine Hg dynamics using a process-based model that traces Hg from land-based sources through river networks to the ocean. Under a realistic scenario, we estimate that ∼1900 megagrams per year (Mg/yr) of Hg enters global rivers, including 1500 Mg/yr from human-induced sources and 400 Mg/yr from soil erosion. Nearly half of this flux (∼1000 Mg/yr) is retained in reservoirs and dams, which act as major sinks. While such retention limits downstream delivery to the oceans, it also heightens in-reservoir Hg methylation risks. By bridging the gap between Hg releases and observed riverine exports, our framework offers a scalable tool for data-limited regions, promotes data access, and supports global freshwater and pollution-management strategies.

Environmental Science & Technology↗
USGS2026

Compact seismicity bursts have different characteristics from regional seismicity

Earthquakes tend to cluster, developing into sequences driven by stress perturbations and transient fault-zone processes. Depending on the driving process, earthquake sequences show differing behaviors. This variability challenges our ability to observe or distinguish these driving processes in high resolution. Here we systematically identify seismicity bursts throughout southern California using new statistical methods and examine their causes with other independent geophysical observations. Seismicity bursts are defined as statistically significant seismicity rate anomalies. Our approach has the advantage of being data driven, depending on few earthquake occurrence assumptions. We find abundant seismicity bursts across southern California, most frequently occurring along the San Jacinto Fault and in the Salton Sea and Coso geothermal fields. These seismicity bursts are highly compact in space and time, often encompassed by a 5 km radius and have durations less than 10 hr. Many of the seismicity bursts have their largest earthquake near the beginning of the sequence, but the largest earthquake is usually not an obvious mainshock. We utilize a variety of independent geophysical data sets to analyze the characteristics of the seismicity bursts, finding that the seismicity bursts have low b-values, low spectral stress drops, and varied stress ratios compared to regional seismicity. These differences suggest that seismicity bursts are driven by transient processes acting frequently across fault networks.

California↗
USGS2025

Enhancing mineral systems exploration through geochronology, thermochronology, and isotope analysis: USGS Geochron and USGS Isotope databases

A mineral systems approach to mineral exploration provides a comprehensive framework for understanding ore deposit formation by examining the geodynamic, magmatic, hydrothermal, and sedimentary processes responsible for mineralization, alteration, and remobilization of economic mineral deposits. Temporal and thermal constraints on ore genesis are crucial for refining mineral system models and guiding predictive exploration strategies. Geochronology and thermochronology offer invaluable insights into the timing and thermal evolution of ore-forming processes, whereas isotopic analyses provide critical information on the source and geochemical history of ore-forming fluids. Combining these methodologies have proven highly effective for mineral exploration in regions like Australia, however, their combined application has been limited in the United States. To apply these tools to mineral systems-based exploration, the U.S. Geological Survey (USGS) has developed two products: (1) The USGS Geochron Database, and (2) the USGS Isotope Database. These databases provide centralized repositories of geo/thermochronological dates and data (Geochron Database) and both radiogenic and stable isotope data (Isotope Database) generated by the USGS and partners over the past decades. Integrating these datasets together and with traditional exploration approaches provides the mineral exploration community with powerful tools for determining the temporal and thermal histories of ore systems and identifying metallogenic source provinces.

Continental United States↗
USGS2025

A joint Gaussian process model of geochemistry, geophysics, and temperature for groundwater TDS in the San Ardo Oil Field, California, USA

Decline in availability of fresh groundwater has expanded interest in brackish groundwater resources; however, the distribution of brackish groundwater is poorly understood. Water resources in sedimentary basins across the United States often overlie oil and gas development. Mapping of groundwater total dissolved solids (TDS) using data from oil well geophysical logs has become an important technique for identifying fresh and brackish groundwater. Existing geophysical log analysis methods use porosity and temperature to relate formation resistivity to TDS. Typically, natural geothermal gradients are used to estimate temperature at the location of collected resistivity. However, in thermally enhanced oil fields, steam is injected into the subsurface to mobilize high viscosity oil, creating variable temperature distributions. Furthermore, TDS derived from resistivity also depends on the fractions of dominant ions. Typically, chloride and bicarbonate fractions must be determined. It is also necessary to model TDS across many geologic units with heterogenous porosity distributions. Collectively, each quantity used to estimate TDS (resistivity, porosity, temperature, bicarbonate fraction) varies in space and time, and available data points are rarely collocated. Here, we present a new method of mapping groundwater TDS that continuously models each quantity together with a joint Gaussian process. This method enables mapping fresh and brackish water with practically available data. We apply this method to the San Ardo Oil Field in Monterey County, California, where steam injection occurs. In some areas of the aquifer system overlying the oil zone, the temperature is ∼75 °C, roughly twice the natural background value. Groundwater TDS is typically <1,500 mg/L in the aquifer and increases with depth to ∼9,000 mg/L in the oil-producing zone. A low-permeability clay layer delineates the fresh and brackish water, likely by inhibiting surface recharge from penetrating the deeper zones, allowing higher-TDS connate water to remain in place. Weaker lateral TDS trends may be controlled by recharge patterns associated with the Salinas River. Our model reveals with high certainty that groundwater has freshened in one localized part of the oil-producing zone and suggests with less certainty that more widespread freshening has also occurred. The lowering of TDS was possibly from decades of low-TDS steam injection and the associated fluid production and disposal operations.

California↗
USGS2025

Quaternary-active faults and the role of inherited structures in the Sacramento-San Joaquin Delta, western Central Valley, northern California

Seismic sources and their associated hazards within the Sacramento-San Joaquin Delta region of north-central California are relatively poorly characterized as compared to other, more heavily studied regions of northern California, such as the San Francisco Bay Area. Here we present a synthesis of subsurface, bedrock geology, and geodetic datasets from the Delta and from the Coast Ranges and Diablo Range to the northwest and southwest, respectively. We integrate these data and our own surface geologic and geomorphic observations to present a comprehensive review of faults in the Delta that exhibit Quaternary activity. Structural geologic data from the surrounding region highlight the significant influence that Late Cretaceous-to-Paleogene forearc structures exert on the geometry and kinematics of major Quaternary-active structures within the Delta. These inherited structures — including the Pittsburg-Kirby Hills Fault, Midland Fault, and Great Valley Fault System — exhibit a range of geometries and kinematics. Analysis of geomorphology along these structures suggests that these structures combine to accommodate Quaternary strain across the Delta region. A clearer understanding of subsurface geometries and structural relationships, built upon the regional tectonic history, provides insight into modern deformation accommodated on older structures and helps inform interpretations of seismic hazard within the Delta.

California↗
USGS2026

Characterizing changes in postfire debris-flow hazard as burned areas recover

Emergency assessments of postfire debris-flow hazards that are performed by the U.S. Geological Survey (USGS) provide estimates of debris-flow likelihood and rainfall triggering conditions that are used for evaluating and managing runoff-generated debris-flow hazards in recently burned areas throughout the western United States. Although the immediate postfire period, within roughly one year after fire, is typically the most susceptible to runoff-generated debris flows, the hazard evolves in time and space as the burned area recovers. The recovery trajectory a given burned area will take depends on local climate and weather and can be difficult to predict. Some burned areas recover quickly, whereas others experience debris flows for multiple years after fire. As a result, extending our ability to update debris-flow likelihood estimates and rainfall thresholds based on observed recovery of the burned area would be beneficial. We present a method for multi-year runoff-generated debris-flow hazard assessment that leverages the USGS “M1” debris-flow likelihood model and integrates updated, satellite-derived, normalized burn ratio data to estimate vegetation recovery. We predict recovery-aware rainfall thresholds and validate them against a multi-year debris-flow hazard prediction and could be adapted for use with other debris-flow models that incorporate burn severity data.

Arizona, California, Colorado, New Mexico, Washing↗
USGS2023

Hidden system identification: Basin modeling as a tool for examining sedimentary geothermal resource potential

Three-dimensional (3D) geologic and temperature models have been developed for the onshore U.S. Gulf Coast. The results from these models identify areas of moderate- to high-temperature (90°-150°C and >150°C; respectively) geothermal resources at depths <6 km. This modeling study addresses the fundamental challenge of predicting where opportune temperature and lithology coincide. Unlike traditional geothermal systems with surface expressions of hydrothermal circulation (e.g., hot springs, fumaroles, sinter), sedimentary geothermal systems (SGS) are generally hidden. Historically, simplified efforts to predict subsurface temperatures in sedimentary basins have focused on linear temperature extrapolation that does not consider the variable thermal properties of different lithologies or lithologic changes with depth (e.g., compaction, lithification). Therefore, the need to understand basin architecture and predict temperatures in 3D within SGS is paramount to identifying geothermal resources and determining economic feasibility. Basin modeling software has long been used to characterize the subsurface conditions of sedimentary basins, including temperature, in the pursuit of finding hydrocarbons. This tool can also be adapted to evaluate the potential of geothermal resources in a sedimentary basin by predicting the confluence of desirable temperatures and reservoir lithologies. In this work, PetroMod basin modeling software was used to create a regional geologic model of the onshore U.S. Gulf Coast, covering over 500,000 km 2 calibrated to temperature data from wells. Inputs include structural surfaces from commercial databases, lithology information derived from published literature, and corrected bottom-hole temperatures (BHT) from over 6,000 wells. The resulting 3D geologic model can be used to predict temperatures throughout the basin. Maps were exported showing the depth, depositional unit, and reservoir lithology at which temperatures of 90°C and 150°C were reached, revealing over 400,000 km 2 of moderate- to high-temperature resources at depths <6 km. These maps function as a first-order screening tool to identify areas where low-, moderate-, or high-grade resource potential may exist, based on temperature and if optimal reservoir lithologies or depositional units of interest are present. Depending on the success criteria of a project, the same maps can be exported for any isotherm or incorporate other 1407 Gardner and Birdwell subsurface properties. The methodology employed in this work can be applied in any sedimentary basin with available subsurface data. Further calibration incorporating other data, including pressure and porosity, can expand the utility of basin modeling for geothermal evaluations. Basin modeling is a powerful but underutilized tool for identifying prospective geothermal resources in sedimentary basins.

Conference Paper↗
USGS2025

Tracing fluid evolution during batholith and deposit formation: In-situ and bulk rock Mo isotopes from the Questa porphyry Mo deposit, New Mexico, USA

The Oligocene Questa porphyry Mo deposit, located in New Mexico, USA, is a well-characterized system that formed over 400 kyr, punctuating the 8 Myr formation of the Questa-Latir batholith. Detailed sampling of the intrusions and minerals associated with magmatichydrothermal mineralization, as well as bookending barren intrusions, allows for examination of the Mo isotope record of the deposit and its host batholith. Through this established chronologic framework, such data can yield insights into the metallogenesis of deposit formation and long-term magma genesis evolution for upper crustal magmatism. The Mo isotopic compositions of barren intrusions yield a younging trend towards lighter δ 98 Mo. However, intrusions associated with Mo deposit formation yield heavier δ 98 Mo relative to barren magmatism, by up to 2.0‰. This indicates that they were affected by an isotopically heavy and Mo-rich fluid. The in-situ data from molybdenite covers the range observed in mineralized bulk rocks. However, individual samples consistently yield Mo isotopic variations of 0.4‰ to 0.5‰. The consistency of the δ 98 Mo variation in in-situ analyses of molybdenite within hand samples and individual mineral grains is likely the result of MoS 2 crystallization in a closed system and reflects an almost complete precipitation of Mo.

New Mexico↗
USGS2026

Prioritizing resource protection and understanding potential susceptibility of springs to surficial changes in a low-temperature geothermal system

Geothermal systems are vulnerable to changes in water budget and composition, requiring science-based management. This study uses a dataset of spring water temperatures, time series of groundwater residence time tracers (tritium and carbon-14), and stable isotopes of water to understand geothermal flow in a low-temperature geothermal system in north west Colorado, United States (Steamboat Springs). The geothermal system is bisected by the Yampa River, necessitating a stream mass balance approach to quantify total discharge. Time series analysis of water temperature data provides a ranked list of features more susceptible to surficial changes, which is corroborated using time series of tritium which indicate spatially distinct patterns of mixing between modern and pre-modern groundwater. All springs contain a portion of pre-modern groundwater that is thousands to tens of thousands of years old, a period coinciding with melting of extensive Pleistocene glaciers that was likely one of the recharge sources to the geothermal system. Stream mass balance indicates that greater than 80% of the total geothermal discharge is derived from diffuse or small springs, highlighting the extensive nature of the geothermal outflow zone and the association with local geologic structures. This study provides baseline data to support management of the Steamboat Springs geothermal system and indicates the utility of these approaches in developing science-based geothermal management.

Colorado↗
USGS2025

Drone-based radiometric surveys provide high-resolution mine waste characterization

Airborne radiometric surveys use passive geophysical techniques to characterize geochemical variations at or near earth’s surface. These methods have been used for a variety of mapping applications, including mineral resource evaluation. However, detailed characterization of smaller geologic targets, including mine waste features, requires flying at lower altitudes and with tighter line spacing than is feasible with traditional aircraft. Here, a small uncrewed aircraft system (sUAS) equipped with a radiometric sensor was used to acquire high-resolution gamma-spectrometry over small mine waste features and a low-grade stockpile in southwestern New Mexico. The sUAS radiometric system mapped local variability within each survey area and revealed ~2–10 m wide zones where radioelements K, Th, and U may be elevated 2–10× the surrounding material. Additionally, the sUAS radiometric data revealed radioelement variability across survey sites, which correlated reasonably well with variability seen in geochemical samples at each survey site, even though samples collected from individual sites showed high local variability. The sUAS data characterized local heterogeneity within mine waste and other small geologic targets at scales of a few meters to tens of meters, which is not possible with traditional crewed aircraft, and with continuity of coverage that is not possible with ground surveys, thus filling a key gap in geophysical survey spatial resolution.

New Mexico↗
USGS2024

A multidisciplinary approach that considers occurrence, geochemistry, bioavailability, and toxicity to prioritize critical minerals for environmental research

Critical minerals (or critical elements) are minerals or elements that are essential to global security and development and have supply chains vulnerable to disruption. In general, knowledge of the environmental behavior and health effects of critical elements is needed to support the development of safe and environmentally responsible supplies. This knowledge includes identifying potential consequences of increased critical element production and use, alternative critical element sources such as mine wastes, and adverse effects of critical elements on ecosystem condition and organismal health. Here we identify significant data gaps in the understanding of critical elements in surficial and aquatic environments, and the need, given the large number of commodities (50) identified on the 2022 critical minerals list for the United States, for an approach to prioritize them for study of their environmental fate and effects. We propose a multidisciplinary approach for this prioritization, considering measures of occurrence, geochemistry, bioavailability, and toxicity. We describe relatively easy-to-obtain metrics for each of these topic areas and demonstrate the utility of this integrated prioritization approach using indium and zinc as examples. This approach facilitates prioritizing research with a focus on those critical elements that are most mobile in the environment, bioavailable, toxic, or simply lacking data in these categories.

Environmental Science & Technology↗
USGS2024

Changes in soil erosion caused by wildfire: A conceptual biogeographic model

Soil erosion rates after wildfire are strongly controlled by intrinsic properties such as topography, weather, climate, soil, and vegetation. These landscape and hydroclimatic properties are important in determining post-fire erosion rates; however, their influence on post-fire erosion and their interaction with the intensity of a wildfire remains uncertain. A key limitation in resolving this uncertainty is the lack of conceptual models and frameworks for organising data related to the geomorphic sensitivity of landscapes to wildfire. Our aim is to develop a framework for consolidating understanding of post-fire erosion in the context of hydroclimatic conditions which contribute to system states, for example soil and vegetation properties, and wildfire regime. The framework is developed around a simple conceptual model where the change in erosion due to wildfire is a product of change in runoff generation and sediment supply, which is strongly related to landscape net primary productivity (NPP). We hypothesised that geomorphic sensitivity to wildfire should vary as a unimodal humped relationship across a gradient of NPP, peaking at an intermediate level. To develop this framework and to test the hypothesis, we first review intrinsic soil and vegetation properties related to the supply and transport of sediment from burned and unburned hillslopes. Net primary productivity is systematically related to these intrinsic properties because it integrates many processes involved in soil and vegetation development. Empirical data indicate a trend in the change in surface runoff generation with NPP after wildfire, peaking at an NPP of approximately 15 Mg C ha −1 y −1 . A simple model of fuel availability and soil heating are correlated with a similar “humped” trend in sediment supply. These results are consistent with our conceptual model, which indicates that sediment supply and runoff contribute towards a distinct peak in wildfire effects on erosion at an intermediate level of NPP. We propose that landscapes of intermediate NPP typically have the highest quantity of fuel available to burn, which cause large changes to the soil surface properties. Landscapes at intermediate NPP also tend to produce intrinsic soil and vegetation properties that promote erosion after wildfire. The interplay between these short and long-term landscape characteristics is strongest at intermediate levels of NPP. Our proposed biogeographic model of geomorphic sensitivity to wildfire was supported by erosion data from burned hillslope and zero-order catchments studies from a range fire-prone landscapes in Australia and North America. Our proposed conceptual model will help identify areas most vulnerable to post-fire erosion changes.

Geomorphology↗