USGS Science⌕ Search

SEARCH · USGS Science

Results for “Science Advances”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 847 records · Page 47Linked to original sources
USGS2009

EAARL coastal topography — Northern Gulf of Mexico, 2007: Bare earth

These remotely sensed, geographically referenced elevation measurements of Lidar -derived bare earth ( BE ) topography were produced as a collaborative effort between the U.S. Geological Survey ( USGS ), Florida Integrated Science Center ( FISC ), St. Petersburg, FL ; the National Park Service ( NPS ), Gulf Coast Network, Lafayette, LA ; and the National Aeronautics and Space Administration ( NASA ), Wallops Flight Facility, VA . The purpose of this project is to provide highly detailed and accurate datasets of select barrier islands and peninsular regions of Louisiana, Mississippi, Alabama, and Florida, acquired on June 27-30, 2007. The datasets are made available for use as a management tool to research scientists and natural resource managers. An innovative airborne Lidar instrument originally developed at the NASA Wallops Flight Facility, and known as the Experimental Advanced Airborne Research Lidar ( EAARL ), was used during data acquisition. The EAARL system is a raster-scanning, waveform-resolving, green-wavelength (532-nanometer) Lidar designed to map near-shore bathymetry, topography, and vegetation structure simultaneously. The EAARL sensor suite includes the raster-scanning, water-penetrating full-waveform adaptive Lidar , a down-looking red-green-blue ( RGB ) digital camera, a high-resolution multi-spectral color infrared ( CIR ) camera, two precision dual-frequency kinematic carrier-phase GPS receivers, and an integrated miniature digital inertial measurement unit which provide for submeter georeferencing of each laser sample. The nominal EAARL platform is a twin-engine Cessna 310 aircraft, but the instrument may be deployed on a range of light aircraft. A single pilot, a Lidar operator, and a data analyst constitute the crew for most survey operations. This sensor has the potential to make significant contributions in measuring sub-aerial and submarine coastal topography within cross-environmental surveys. Elevation measurements were collected over the survey area using the EAARL system and the resulting data were then processed using the Airborne Lidar Processing System ( ALPS ), a custom-built processing system developed in a NASA - USGS collaboration. ALPS supports the exploration and processing of Lidar data in an interactive or batch mode. Modules for presurvey flight line definition, flight path plotting, Lidar raster and waveform investigation, and digital camera image playback have been developed. Processing algorithms have been developed to extract the range to the first and last significant return within each waveform. ALPS is used routinely to create maps that represent submerged or sub-aerial topography. Specialized filtering algorithms have been implemented to determine the 'bare earth' under vegetation from a point cloud of last return elevations.

northern Gulf of Mexico↗
USGS2015

Measurement of in situ sulfur isotopes by laser ablation multi-collector ICPMS: opening Pandora’s Box

Laser ablation multi-collector ICPMS is a modern tool for in situ measurement of S isotopes. Advantages of the technique are speed of analysis and relatively minor matrix effects combined with spatial resolution sufficient for many applications. The main disadvantage is a more destructive sampling mechanism relative to the ion microprobe technique. Recent advances in instrumentation allow precise measurement with spatial resolutions down to 25 microns. We describe specific examples from economic geology where increased spatial resolution has greatly expanded insights into the sources and evolution of fluids that cause mineralization and illuminated genetic relations between individual deposits in single mineral districts.

Procedia Earth and Planetary Science↗
USGS2020

Observations of an extreme atmospheric river storm with a diverse sensor network

Observational networks enhance real‐time situational awareness for emergency and water resource management during extreme weather events. We present examples of how a diverse, multitiered observational network in California provided insights into hydrometeorological processes and impacts during a 3‐day atmospheric river storm centered on 14 February 2019. This network, which has been developed over the past two decades, aims to improve understanding and mitigation of effects from extreme storms influencing water resources and natural hazards. We combine atmospheric reanalysis output and additional observations to show how the network allows: (1) the validation of record cool season precipitable water observations over southern California; (2) the identification of phenomena that produce natural hazards and present difficulties for short‐term weather forecast models, such as extreme precipitation amounts and snow level variability; (3) the use of soil moisture data to improve hydrologic model forecast skill in northern California's Russian River basin; and (4) the combination of meteorological data with seismic observations to identify when a large avalanche occurred on Mount Shasta. This case study highlights the value of investments in diverse observational assets and the importance of continued support and synthesis of these networks to characterize climatological context and advance understanding of processes modulating extreme weather.

California↗
USGS2008

EAARL submerged topography– U.S. Virgin Islands 2003

These remotely sensed, geographically referenced elevation measurements of Lidar-derived submerged topography were produced as a collaborative effort between the U.S. Geological Survey (USGS), Florida Integrated Science Center (FISC), St. Petersburg, FL; the National Park Service (NPS), South Florida-Caribbean Network, Miami, FL; and the National Aeronautics and Space Administration (NASA), Wallops Flight Facility, VA. This project provides highly detailed and accurate bathymetric datasets of a portion of the U.S. Virgin Islands, acquired on April 21, 23, and 30, May 2, and June 14 and 17, 2003. The datasets are made available for use as a management tool to research scientists and natural resource managers. An innovative airborne Lidar instrument originally developed at the NASA Wallops Flight Facility, and known as the Experimental Advanced Airborne Research Lidar (EAARL), was used during data acquisition. The EAARL system is a raster-scanning, waveform-resolving, green-wavelength (532-nanometer) Lidar designed to map near-shore bathymetry, topography, and vegetation structure simultaneously. The EAARL sensor suite includes the raster-scanning, water-penetrating full-waveform adaptive Lidar, a down-looking red-green-blue (RGB) digital camera, a high-resolution multi-spectral color infrared (CIR) camera, two precision dual-frequency kinematic carrier-phase GPS receivers, and an integrated miniature digital inertial measurement unit, which provide for submeter georeferencing of each laser sample. The nominal EAARL platform is a twin-engine Cessna 310 aircraft, but the instrument may be deployed on a range of light aircraft. A single pilot, a Lidar operator, and a data analyst constitute the crew for most survey operations. This sensor has the potential to make significant contributions in measuring sub-aerial and submarine coastal topography within cross-environmental surveys. Elevation measurements were collected over the survey area using the EAARL system, and the resulting data were then processed using the Airborne Lidar Processing System (ALPS), a custom-built processing system developed in a NASA-USGS collaboration. ALPS supports the exploration and processing of Lidar data in an interactive or batch mode. Modules for presurvey flight line definition, flight path plotting, Lidar raster and waveform investigation, and digital camera image playback have been developed. Processing algorithms have been developed to extract the range to the first and last significant return within each waveform. ALPS is used routinely to create maps that represent submerged or first surface topography. Specialized filtering algorithms have been implemented to determine the 'bare earth' under vegetation from a point cloud of last return elevations.

St John Island↗
USGS2007

Advances through collaboration: sharing seismic reflection data via the Antarctic Seismic Data Library System for Cooperative Research (SDLS)

The Antarctic Seismic Data Library System for Cooperative Research (SDLS) has served for the past 16 years under the auspices of the Antarctic Treaty (ATCM Recommendation XVI-12) as a role model for collaboration and equitable sharing of Antarctic multichannel seismic reflection (MCS) data for geoscience studies. During this period, collaboration in MCS studies has advanced deciphering the seismic stratigraphy and structure of Antarctica’s continental margin more rapidly than previously. MCS data compilations provided the geologic framework for scientific drilling at several Antarctic locations and for high-resolution seismic and sampling studies to decipher Cenozoic depositional paleoenvironments. The SDLS successes come from cooperation of National Antarctic Programs and individual investigators in “on-time” submissions of their MCS data. Most do, but some do not. The SDLS community has an International Polar Year (IPY) goal of all overdue MCS data being sent to the SDLS by end of IPY. The community science objective is to compile all Antarctic MCS data to derive a unified seismic stratigraphy for the continental margin – a stratigraphy to be used with drilling data to derive Cenozoic circum-Antarctic paleobathymetry maps and local-to-regional scale paleoenvironmental histories.

Open-File Report↗
USGS2002

Paleocurrent analysis of a deformed Devonian foreland basin in the northern Appalachians, Maine, USA

New paleocurrent data indicate that the widespread Late Silurian and Devonian flysch and molasse succession in Maine was deposited in an ancestral, migrating foreland basin adjacent to an advancing Acadian orogenic belt. The foreland-basin sequence spread across a varied Silurian paleogeography of deep basins and small islands-the vestiges of an intraoceanic arc complex that not long before had collided with the Laurentian passive margin during the Ordovician Taconic Orogeny. We report paleocurrents from 43 sites representing 12 stratigraphic units, the most robust and consistent results coming from three units: Madrid Formation (southwesterly paleoflow), Carrabassett Formation (northerly paleoflow), and Seboomook Group (westerly paleoflow). Deformation and regional metamorphism are sufficiently intense to test the limits of paleocurrent analysis requiring particular care in retrodeformation. ?? 2002 Elsevier Science B.V. All rights reserved.

Sedimentary Geology↗
USGS2024

Climate change

Amphibian ecology and distribution are strongly correlated with climate. Regional patterns of amphibian biodiversity are intimately linked to temperature, evapotranspiration rate, and clines in humidity. While amphibians are and will continue to be adversely affected by recent and projected changes in climate, research suggests that adaptation may happen more slowly than the expected rate of environmental shifts. Here, we review conservation-relevant aspects of both realised and potential impacts of climate change, and outline options for amphibian conservation planning and management. Recent advances in our understanding of climate change impacts on amphibians have primarily stemmed from ecological modelling and direct assessment of climatic tolerances and dispersal capacities through physiological assays, landscape genetics, and dispersal tracking. Anthropogenic climate change has already altered amphibian assemblages and their impacts on ecosystem functioning and services. Because of known and hypothesised ecological tolerances, many amphibians might have reached or exceeded most limits in their ability to adapt to or tolerate further climate change, however the uncertainties are substantial. Implementation of conservation planning and action can help to forestall severe impacts of environmental shifts. Scientific research and science-based decision-making and policy development have already lagged; the current pace of conservation planning and action may not allow for effective identification of threats and mitigation. An increased response rate could help to avert further loss of amphibian biodiversity and decay of ecosystem services. The lack of basic field research in natural habitats continues to be an underlying challenge. We suggest priority areas of research to include the development of biologically realistic predictive models of amphibian response to climate change, field verification of model estimates and key parameters, population monitoring across multiple sites and taxa, and a combination of efforts within and across ecosystems to understand how impacts of climate change can be better mitigated.

Book chapter↗
USGS2011

EAARL Coastal Topography-Cape Hatteras National Seashore, North Carolina, Post-Nor'Ida, 2009: Bare Earth

These remotely sensed, geographically referenced elevation measurements of lidar-derived bare-earth (BE) topography datasets were produced collaboratively by the U.S. Geological Survey (USGS), St. Petersburg Coastal and Marine Science Center, St. Petersburg, FL, and the National Park Service (NPS), Northeast Coastal and Barrier Network, Kingston, RI. This project provides highly detailed and accurate datasets of a portion of the National Park Service Southeast Coast Network's Cape Hatteras National Seashore in North Carolina, acquired post-Nor'Ida (November 2009 nor'easter) on November 27 and 29 and December 1, 2009. The datasets are made available for use as a management tool to research scientists and natural-resource managers. An innovative airborne lidar instrument originally developed at the NASA Wallops Flight Facility, and known as the Experimental Advanced Airborne Research Lidar (EAARL), was used during data acquisition. The EAARL system is a raster-scanning, waveform-resolving, green-wavelength (532-nanometer) lidar designed to map near-shore bathymetry, topography, and vegetation structure simultaneously. The EAARL sensor suite includes the raster-scanning, water-penetrating full-waveform adaptive lidar, a down-looking red-green-blue (RGB) digital camera, a high-resolution multispectral color-infrared (CIR) camera, two precision dual-frequency kinematic carrier-phase GPS receivers, and an integrated miniature digital inertial measurement unit, which provide for sub-meter georeferencing of each laser sample. The nominal EAARL platform is a twin-engine aircraft, but the instrument was deployed on a Pilatus PC-6. A single pilot, a lidar operator, and a data analyst constitute the crew for most survey operations. This sensor has the potential to make significant contributions in measuring sub-aerial and submarine coastal topography within cross-environmental surveys. Elevation measurements were collected over the survey area using the EAARL system, and the resulting data were then processed using the Airborne Lidar Processing System (ALPS), a custom-built processing system developed in a NASA-USGS collaboration. ALPS supports the exploration and processing of lidar data in an interactive or batch mode. Modules for presurvey flight-line definition, flight-path plotting, lidar raster and waveform investigation, and digital camera image playback have been developed. Processing algorithms have been developed to extract the range to the first and last significant return within each waveform. ALPS is used routinely to create maps that represent submerged or sub-aerial topography. Specialized filtering algorithms have been implemented to determine the 'bare earth' under vegetation from a point cloud of last return elevations.

Data Series↗
USGS2014

Science applications of a multispectral microscopic imager for the astrobiological exploration of Mars

Future astrobiological missions to Mars are likely to emphasize the use of rovers with in situ petrologic capabilities for selecting the best samples at a site for in situ analysis with onboard lab instruments or for caching for potential return to Earth. Such observations are central to an understanding of the potential for past habitable conditions at a site and for identifying samples most likely to harbor fossil biosignatures. The Multispectral Microscopic Imager (MMI) provides multispectral reflectance images of geological samples at the microscale, where each image pixel is composed of a visible/shortwave infrared spectrum ranging from 0.46 to 1.73 μ m. This spectral range enables the discrimination of a wide variety of rock-forming minerals, especially Fe-bearing phases, and the detection of hydrated minerals. The MMI advances beyond the capabilities of current microimagers on Mars by extending the spectral range into the infrared and increasing the number of spectral bands. The design employs multispectral light-emitting diodes and an uncooled indium gallium arsenide focal plane array to achieve a very low mass and high reliability. To better understand and demonstrate the capabilities of the MMI for future surface missions to Mars, we analyzed samples from Mars-relevant analog environments with the MMI. Results indicate that the MMI images faithfully resolve the fine-scale microtextural features of samples and provide important information to help constrain mineral composition. The use of spectral endmember mapping reveals the distribution of Fe-bearing minerals (including silicates and oxides) with high fidelity, along with the presence of hydrated minerals. MMI-based petrogenetic interpretations compare favorably with laboratory-based analyses, revealing the value of the MMI for future in situ rover-mediated astrobiological exploration of Mars.

Astrobiology↗
USGS2022

Interannual variation in climate contributes to contingency in post-fire restoration outcomes in seeded sagebrush steppe

Interannual variation, especially weather, is an often-cited reason for restoration “failures”; yet its importance is difficult to experimentally isolate across broad spatiotemporal extents, due to correlations between weather and site characteristics. We examined post-fire treatments within sagebrush-steppe ecosystems to ask: (1) Is weather following seeding efforts a primary reason why restoration outcomes depart from predictions? and (2) Does the management-relevance of weather differ across space and with time since treatment? Our analysis quantified range-wide patterns of sagebrush ( Artemisia spp.) recovery, by integrating long-term records of restoration and annual vegetation cover estimates from satellite imagery following thousands of post-fire seeding treatments from 1984 to 2005. Across the Great Basin, sagebrush growth increased in wetter, cooler springs; however, the importance of spring weather varied with sites' long-term climates, suggesting differing ecophysiological limitations across sagebrush's range. Incorporation of spring weather, including from the “planting year,” improved predictions of sagebrush recovery, but these advances were small compared to contributions of time-invariant site characteristics. Given extreme weather conditions threatening this ecosystem, explicit consideration of weather could improve the allocation of management resources, such as by identifying areas requiring repeated treatments; but improved forecasts of shifting mean conditions with climate change may more significantly aid the prediction of sagebrush recovery.

California, Colorado, Idaho, Nevada, Oregon, Utah,↗
USGS1980

United States Geological Survey Yearbook, fiscal year 1979

In March 1979, the U.S. Geological Survey celebrated its 100th year of service to the Nation and 10 decades of stewardship of the land and its resources. During this year, as in the previous 99, the Survey discharged its national trust by collecting, analyzing, and disseminating earth science information and by continuing its somewhat more recent responsibilities of supervising the development of energy and mineral resources on Federal lands. The basic mission of the Survey has changed over the years, and the scope of its activities and the power of analytic tools have also increased by several orders of magnitude from the early surveys of then "remote" western areas of the United States to surveying and mapping the mountains of the Moon and the polar caps of Mars and from the use of surveyor's transits, picks, the travelling chemistry kits to interpretation of Earth imagery. These representative advances illustrate important and continuing trends for at no previous time have our earth resources been so precious or our consciousness of their finiteness so acute. The Yearbook reports a broad range of the Survey's accomplishments during the past fiscal year and offers an overview of its future. Many of the topics touched on below will continue to be important resource issues in the coming decade.

Yearbook↗
USGS2019

Volcano deformation: Insights into magmatic systems

Volcano geodesy is the branch of geodetic science that deals with the changing shapes of volcanoes, whether large or small, deep-seated or surficial. Together with seismicity and volcanic gas flux, deformation of the ground surface can be a key indicator of subsurface conditions and processes at volcanoes—information that not only improves scientific understanding of magmatic systems but also is useful for assessing volcano hazards and mitigating their potential consequences. To take full advantage of such information requires detailed characterization of the deformation field in space and time. Currently, no single geodetic technique is capable of providing both the high spatial and temporal resolution required. However, important advances have been made recently by combining information from real-time in situ sensors such as continuous GPS, strainmeters, and tiltmeters with repeated campaign-style GPS, microgravity, interferometric synthetic aperture radar (InSAR), lidar, and photogrammetric observations. Continuous real-time data constrain the timing but not necessarily the spatial extent and pattern of deformation, whereas InSAR provides detailed spatial information but only at intervals of several days to weeks. Repeated microgravity surveys, when combined with independent measurements of surface height, are uniquely sensitive to changes in subsurface mass distribution and therefore can be used to distinguish among processes driven by magma, hydrous fluids, or gas. Simultaneous analysis of multiple geodetic datasets, especially when guided by information from global volcano databases and numerical simulations of volcanic processes and products, can provide a statistical basis for outcome prediction and serve as a guide for additional observations. In the foreseeable future, interactions among magmatic, tectonic, and hydrothermal systems will be monitored and modeled at regional scale in real time, enabling new insights into Earth’s subsurface environment.

Book chapter↗
USGS2017

The future of fish passage science, engineering, and practice

Much effort has been devoted to developing, constructing and refining fish passage facilities to enable target species to pass barriers on fluvial systems, and yet, fishway science, engineering and practice remain imperfect. In this review, 17 experts from different fish passage research fields (i.e., biology, ecology, physiology, ecohydraulics, engineering) and from different continents (i.e., North and South America, Europe, Africa, Australia) identified knowledge gaps and provided a roadmap for research priorities and technical developments. Once dominated by an engineering‐focused approach, fishway science today involves a wide range of disciplines from fish behaviour to socioeconomics to complex modelling of passage prioritization options in river networks. River barrier impacts on fish migration and dispersal are currently better understood than historically, but basic ecological knowledge underpinning the need for effective fish passage in many regions of the world, including in biodiversity hotspots (e.g., equatorial Africa, South‐East Asia), remains largely unknown. Designing efficient fishways, with minimal passage delay and post‐passage impacts, requires adaptive management and continued innovation. While the use of fishways in river restoration demands a transition towards fish passage at the community scale, advances in selective fishways are also needed to manage invasive fish colonization. Because of the erroneous view in some literature and communities of practice that fish passage is largely a proven technology, improved international collaboration, information sharing, method standardization and multidisciplinary training are needed. Further development of regional expertise is needed in South America, Asia and Africa where hydropower dams are currently being planned and constructed.

Fish and Fisheries↗
USGS2005

Headwater riparian invertebrate communities associated with red alder and conifer wood and leaf litter in southeastern Alaska

We examined how management of young upland forests in southeastern Alaska affect riparian invertebrate taxa richness, density, and biomass, in turn, potentially influencing food abundance for fish and wildlife. Southeastern Alaska forests are dominated by coniferous trees including Sitka spruce (Picea sitchensis (Bong.) Carr.), western hemlock (Tsuga heterophylla (Raf.) Sarg.), with mixed stands of red cedar (Thuja plicata Donn.). Red alder (Alnus rubra Bong.) is hypothesized to influence the productivity of young-growth conifer forests and through forest management may provide increased riparian invertebrate abundance. To compare and contrast invertebrate densities between coniferous and alder riparian habitats, leaf litter and wood debris (early and late decay classes) samples were collected along eleven headwater streams on Prince of Wales Island, Alaska, during the summers of 2000 and 2001. Members of Acarina and Collembola were the most abundant taxa collected in leaf litter with alder litter having significantly higher mean taxa richness than conifer litter. Members of Acarina were the most abundant group collected on wood debris and alder wood had significantly higher mean taxa richness and biomass than conifer wood. Alder wood debris in more advanced decay stages had the highest mean taxa richness and biomass, compared to other wood types, while conifer late decay wood debris had the highest densities of invertebrates. The inclusion of alder in young-growth conifer forests can benefit forest ecosystems by enhancing taxa richness and biomass of riparian forest invertebrates. ?? 2005 by the Northwest Scientific Association. All rights reserved.

Northwest Science↗
USGS2020

A socio-environmental geodatabase for integrative research in the transboundary Rio Grande/Río Bravo basin

Management of water resources in the transboundary Rio Grande/Río Bravo Basin (the Basin) presents challenges for state and Federal entities in the United States and Mexico making management decisions on shared water resources. Damming, channelization, water availability, and allocation are governed by water rights and water-sharing agreements. Data and information sharing are important aspects of transboundary cooperation, but differences in format, content, spatial and temporal resolution, and language hinder collaboration. In addition, data on the kinds and geographic distribution of water governance and management institutions across the Basin have not been consistently documented. Existing data disparities parallel the hydrological and social fragmentation of the Basin. Seeking to underscore the interdependence between social and environmental processes in the Basin, anthropologists and modelers collaborated to develop a socio-environmental geodatabase. This geodatabase is a first step in modeling the social components of decision making and their connectivity to environmental processes across the Basin. The geodatabase is available in an open-access domain and contains geospatial data related to water and land governance, hydrology, water use and hydraulic infrastructure, socioeconomics, and the biophysical environment necessary to advance the understanding of basin dynamics. Having these data documented and compiled in a central location serves as a resource to help decision makers better understand upstream and downstream social-environmental characteristics. This knowledge is useful for developing sustainable water management policies in a region where water resources are increasingly under pressure from climatic, environmental, and human-related changes.

Chihuahua, New Mexico, Texas↗
USGS2018

The science, engineering applications, and policy implications of simulation-based PSHA

We summarize scientific methods for developing probabilistic seismic hazard assessments from 3-D earthquake ground motion simulations, describe current use of simulated ground motions for engineering applications, and discuss on-going efforts to incorporate these effects in the U.S. national seismic hazard model. The 3-D simulations provide important, additional information about earthquake ground-shaking, which is critical to proper characterization of potential ground motions. Example uses of these simulations for engineering applications provide alternative approaches to introducing the effects of deep basins on long-period ground motions into design requirements. In Seattle, Washington tall building design includes requirements for accounting for the effect of the Seattle basin, and one method for including this effect relies upon local 3-D simulations. In Los Angeles, California a working group of scientists and engineers is advancing the use of local 3-D simulations for local building codes. In light of the benefit to ground motion characterization from the use of 3-D simulations, similar efforts are underway for national-scale seismic hazard analyses, which seek to make use of the extensive work applied from local efforts; current methods for incorporating these effects on a national-scale are presented.

Conference Paper↗
USGS2001

Effects of thermal regime on ovarian maturation and plasma sex steroids in farmed white sturgeon, Acipenser transmontanus

Recently, commercial aquaculture farms in Northern California have exposed gravid, cultured white sturgeon females to cold water (12 ?? 1??C) throughout the late phase of vitellogenesis and ovarian follicle maturation resulting in improved ovulation rates and egg quality. However, the optimum timing for transfer of broodfish to the cold water and the capacity of transferred broodfish to maintain reproductive competence over an extended time in cold water had not been evaluated. Gravid white sturgeon females that have been raised at water temperatures of 16-20??C were transported to either cold water (12 ?? 1??C; Group 1) in November 1997 or maintained in ambient water temperatures (10-19??C; Group 2) until early spring. In March 1998, half of the fish in Group 2 had regressed ovaries, but the remaining females had intact ovarian follicles and were transported to the cold water. Ovarian follicles and blood were collected from females until they reached the stage of spawning readiness (determined by germinal vesicle position and an oocyte maturation assay) or underwent ovarian regression. Exposure of gravid sturgeon females to ambient water temperatures (14.5 ?? 2.3??C, mean ?? S.D.) from October to March led to a decrease in plasma sex steroids and a high incidence of ovarian regression in fish with a more advanced stage of oocyte development. Transfer of females with intact ovarian follicles to cold water (12 ?? 1??C) in the fall or early spring resulted in normal ovarian development in the majority of females. Holding females in cold water does not seem to override their endogenous reproductive rhythms but extends their capacity to maintain oocyte maturational competence over a longer period of time. A temperature-sensitive phase in ovarian development may occur during the transition from vitellogenic growth to oocyte maturation, and the degree and timing of sensitivity to environmental temperature are dependent on the female's endogenous reproductive rhythm. ?? 2001 Elsevier Science B.V. All Rights reserved.

Aquaculture↗
USGS2006

Mission in the works promises precise global topographic data

Significant deficiencies in the quality of today's topographic data severely limit scientific applications. Very few available data sets meet the stringent requirements of 10–30 m for global digital topography and 5 m or better vertical accuracy, and existing satellite systems are unlikely to fulfill these requirements. The Joint Topographic Science Working Group, appointed by NASA and the Italian Space Agency, concluded that radar interferometry coupled with a laser altimeter would be the most promising approach for improving data quality. By providing its own illumination at a wavelength Ion g enough to (e.g., λ = 25 cm) to penetrate clouds and rain, the interferometer would provide a global, uniform high-quality topographic data set. One mission under study, TOPSAT, is well positioned to fill this niche and promises to pave the way toward a more standardized and precise topographic database. TOPSAT would be an international mission, designed to make use of recent technology advances in such programs as NASA's New Millennium. It could be ready to launch by the end of this decade.

Eos, Transactions, American Geophysical Union↗