USGS Science⌕ Search

SEARCH · USGS Science

Results for “Mineral Economics”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 847 records · Page 47Linked to original sources
USGS1936

The Battle Branch gold mine, Auraria, Georgia

The Battle Branch mine, in north-central Georgia, is well known locally for its pockets of exceptionally rich gold ore. During the period from May 24, 1934, to May 20, 1935, 781.97 ounces of bullion, of an average fineness of about 850, was shipped to the mint. The deposit is of the lode type; it consists of many quartz stringers and lenses grouped in three zones in a schistose phase of the Carolina gneiss. Three stages of mineralization are recognized. An early high-temperature stage produced coarsely crystalline silicates, such as garnet, kyanite, tourmaline, biotite, and muscovite, which were probably formed by a recrystallization of the minerals in the country rock. During the intermediate stage ankerite, quartz, and pyrrhotite were formed. The last stage was marked by chlorite, galena, and gold. Throughout the period of mineralization minor amounts of movement in and across the lode occurred. The distribution of the ore shoots is dependent to a large extent upon the distribution of the cross fractures. The ore shoots are pod-shaped bodies, which pinch and swell abruptly. The gold in the rich shoots is contemporaneous with galena and is clearly of hypogene origin.

Georgia↗
USGS1967

Sulfides associated with the Salton Sea geothermal brine

Concentrated saline brine tapped by a deep well drilled for geothermal power near the Salton Sea, California, deposited metal-rich siliceous scale at the rate of 2 to 3 tons per month. The iron-rich opaline scale contains an average of 20% Cu and up to 6% Ag present in bornite, digenite, chalcopyrite, a new dense polymorph of chalcocite, stromeyerite, and native silver.The brines are in equilibrium with an assemblage of sulfide minerals in the reservoir rocks. Sphalerite containing 16.6 mol % FeS is in equilibrium with the brine in which the activity of sulfur (a (sub s 2 ) ) is estimated at 10 (super -10.2) at 325 degrees C. This is in good agreement with the projected high-temperature data of Barton and Toulmin (2) for the system Fe-Zn-S. Other sulfides identified in the reservoir rocks are pyrite, pyrrhotite, chalcopyrite, and galena.The heavy metals in solution are apparently derived from the sediments of the brine reservoir, being released from the silicate minerals in which they occur in trace amounts, as metamorphism of the sediment proceeds. Although the total of the heavy metals in solution greatly exceeds the sulfur, on a molal basis, the brine is saturated with respect to sulfide components and addition of more sulfide ion would only cause precipitation of sulfides.

California↗
USGS1983

Remote detection of metal anomalies on Pilot Mountain, Randolph County, North Carolina

Pilot Mountain, a hydrothermally altered monadnock within the Carolina slate belt, contains areas of anomalously high amounts of Cu, Mo, and Sn in the soils. Leaves of canopy trees in the mineralized zone also contain more copper than trees in a nearby control area. Spectral data were processed using a wave-form analysis technique to minimize background noise caused by canopy variations and slope effects. Areas of spectral changes in the chlorophyll absorption region seem to correlate well with areas containing anomalous metals.

Economic Geology↗
USGS1998

Additional descriptive models of industrial mineral deposits

This report includes previously written, but unpublished descriptive industrial mineral deposit models not released in earlier reports (Cox and Singer, 1986; Orris, 1992; Orris and Bliss, 1991, 1992). Although some of the models are preliminary, recent and repeated requests for several of the models has led to their release in this compilation. Initial drafts of the clay models were written for individual U.S. deposits or districts by J.W. Hosterman2 of the U.S. Geological Survey (USGS) in the late 1980/s. All of the models in this report have been modified from their original unpublished versions; for most models, the modifications have consisted of additional geologic detail, economic information, and (or) health and environmental considerations related to the deposit type. More extensive alterations have been made to the clay models written by Hosterman, which were put into standard format and extensively revised by G.J. Orris. As much as two-thirds of the information in the current versions of the models post-dates Hosterman's contributions and these models are shown as jointly authored.

Open-File Report↗
USGS1985

The Schwartzwalder uranium deposit. I: Geology and structural controls on mineralization.

Numerous uranium veins occupy fractures and faults in brittle Proterozoic gneisses along the east central Front Range of Colorado. The deposit size correlates with the density and localization of brittle fracture. The largest deposit, the Schwartzwalder, is explained by a singular configuration of complexly broken, deep-reaching brittle gneisses between impervious schists. The gneisses are described as being derived from volcanic rocks, shales, and chemical sediments, including iron, quartz and sulphide formations.-G.J.N.

Economic Geology↗
USGS2016

Magnetic and gravity gradiometry framework for Mesoproterozoic iron oxide-apatite and iron oxide-copper-gold deposits, southeast Missouri, USA

High-resolution airborne magnetic and gravity gradiometry data provide the geophysical framework for evaluating the exploration potential of hidden iron oxide deposits in Mesoproterozoic basement rocks of southeast Missouri. The data are used to calculate mineral prospectivity for iron oxide-apatite (IOA) ± rare earth element (REE) and iron oxide-copper-gold (IOCG) deposits. Results delineate the geophysical footprints of all known iron oxide deposits and reveal several previously unrecognized prospective areas. The airborne data are also inverted to three-dimensional density and magnetic susceptibility models over four concealed deposits at Pea Ridge (IOA ± REE), Boss (IOCG), Kratz Spring (IOA), and Bourbon (IOCG). The Pea Ridge susceptibility model shows a magnetic source that is vertically extensive and traceable to a depth of greater than 2 km. A smaller density source, located within the shallow Precambrian basement, is partly coincident with the magnetic source at Pea Ridge. In contrast, the Boss models show a large (625-m-wide), vertically extensive, and coincident dense and magnetic stock with shallower adjacent lobes that extend more than 2,600 m across the shallow Precambrian paleosurface. The Kratz Spring deposit appears to be a smaller volume of iron oxides and is characterized by lower density and less magnetic rock compared to the other iron deposits. A prospective area identified south of the Kratz Spring deposit shows the largest volume of coincident dense and nonmagnetic rock in the subsurface, and is interpreted as prospective for a hematite-dominant lithology that extends from the top of the Precambrian to depths exceeding 2 km. The Bourbon deposit displays a large bowl-shaped volume of coincident high density and high-magnetic susceptibility rock, and a geometry that suggests the iron mineralization is vertically restricted to the upper parts of the Precambrian basement. In order to underpin the evaluation of the prospectivity and three-dimensional models, an extensive statistical summary of density and apparent magnetic susceptibility measurements is presented that includes data on several hundred samples taken from the deposits, altered wall rocks, and unaltered country rocks.

Missouri↗
USGS2003

Applied geochemistry, geology and mineralogy of the northernmost Carlin trend, Nevada

Investigations in the northernmost Carlin trend were undertaken to advance understanding of the geochemical signatures and genesis of precious metal deposits in the trend . Two fundamental geologic relationships near the trend significantly affect regional geochemical distributions: a remarkably intact lower Paleozoic stratigraphic sequence of siliceous rocks in the upper plate of the middle Paleozoic Roberts Mountains thrust, and the widespread repetition of rocks high in the upper plate during late Paleozoic thrusting that thickens the cover above mineralized rock in the lower plate. A compilation of previously published chemical analyses of 440 stream sediment samples and 115 rocks from two 7 1/2-minute quadrangles, as well as new chemical analyses of approximately 1,000 drill core samples in a 1,514 m (4,970 ft) hole through the Rodeo Creek deposit were used to construct three-dimensional element distribution models that highlight metal zonation in the mineralized systems. The Rodeo Creek deposit comprises deep Ag base-metal ± Au-mineralized rock below the Roberts Mountains thrust and contains an unusually high Ag/Au ratio greater than 30. Stacked geochemical halos related to the deposit are confined to the lower plate of the Roberts Mountains thrust and include two horizons of Hg, Cu, and Zn anomalies-as much as 180 m above the deposit-that mostly result from mercurian sphalerite. Extremely subtle indications of mineralization in the upper plate of the Roberts Mountains thrust above the deposit include arsenopyrite overgrowths on small pyrite crystals in 50- to 75-μm-wide clay-carbonate veinlets that lack alteration halos, arsenical rims on small disseminated crystal of recrystallized diagenetic pyrite, and partial replacement of diagenetic pyrite by tennantite. Some of these minerals contain anomalously high Au. However, these As-(Au)-bearing rocks most likely represent another locus of largely untested mineralized rock rather than distal halos related to either the Rodeo Creek or the nearby Dee and Storm gold deposits. Application of micromineralogic techniques helped to identify mineral assemblages that are specific to mineralization and provided an empirical foundation for interpretations of geochemical halos in the Carlin trend . District-scale geochemical patterns of several elements in stream sediments and surface rocks coincide with the northernmost Carlin trend and can be used to explore for Carlin -type deposits. Concentrations of elevated As and Sb in stream sediments (as much as 54 ppm As) have northwest-elongate lobate patterns that clearly outline the trend across a width of approximately 4 km. Arsenic contents of exposed rocks (as much as 90 ppm As) strongly correlate with As contents of derivative stream sediments, and rock contents of Sb show a somewhat lesser but nonetheless strong and similar correspondence. Factor analysis of stream-sediment data shows that those factor scores that are correlated with As, Sb, Au, and Pb also are high along the trend and suggest that mineralized rocks may be present. Although As was not detected by scanning electron microscope-energy dispersive spectrometer (SEM-EDS) studies in heavy mineral concentrates of high-As stream sediments in the Carlin trend , X-ray absorption near-edge spectra (XANES) of selected light fractions of stream sediment samples indicate that Al-bearing phases, such as gibbsite, amorphous Al oxyhydroxides, or aluminosilicate clay minerals host most of the As(V). The best fit, visually and in terms of the lowest residual, was obtained by a model compound of As(V) sorbed to gibbsite. Thus, most As in stream sediments derived from altered rock within the Carlin trend apparently is contained in light fractions. The geochemical character of young, unconsolidated, postmineral deposits that cover mineralized rocks on the Carlin trend partly results from mineralized sources along the trend . Concentration of As in the Miocene Carlin Formation shows an exceptionally well developed progressive increase to about 30 ppm As as altered rock surrounding the trend is approached. Mineralized and/or altered rock fragments probably have been shed directly into the sedimentary basin of the Carlin Formation, and migration of As, now fixed as As(V), also may have occurred in the supergene environment after material was recycled out of the Carlin Formation and into present-day gulleys.

Nevada↗
USGS2003

Metamorphic origin of ore-forming fluids for orogenic gold-bearing quartz vein systems in the North American Cordillera: constraints from a reconnaissance study of δ 15 N, δD, and δ 18 O

The western North American Cordillera hosts a large number of gold-bearing quartz vein systems from the Mother Lode of southern California, through counterparts in British Columbia and southeastern Alaska, to the Klondike district in central Yukon. These vein systems are structurally controlled by major fault zones, which are often reactivated terrane-bounding sutures that formed in orogens built during accretion and subduction of terranes along the continental margin of North America. Mineralization ages span mid-Jurassic to early Tertiary and encompass much of the evolution ofthe Cordilleran orogen. Nitrogen contents and δ15N values of hydrothermal micas from veins are between 130 and 3,500 ppm and 1.7 to 5.5 per mil, respectively. These values are consistent with fluids derived from metamorphic dehydration reactions within the Phanerozoic accretion-subduction complexes, which have δ15N values of 1 to 6 per mil. The δ18O values of gold-bearing vein quartz from different locations in the Cordillera are between 14.6 and 22.2 per mil but are uniform for individual vein systems. The δD values of hydrothermal micas are between -110 and -60 per mil. Ore fluids have calculated δ18O values of 8 to 16 per mil and δD values of -65 to -10 per mil at an estimated temperature of 300δC; δD values of ore fluids do not show any latitudinal control. These results indicate a deep crustal source for the ore-forming fluids, most likely of metamorphic origin. Low δDH2O values of -120 to -130 per mil for a hydrous muscovite from the Sheba vein in the Klondike district reflect secondary exchange between recrystallizing mica and meteoric waters. Collectively, the N, H, and O isotope compositions of ore-related hydrothermal minerals indicate that the formation of these gold-bearing veins involved dilute, aqueous carbonic, and nitrogen-bearing fluids that were generated from metamorphic dehydration reactions at deep crustal levels. These data are not consistent with either mantle-derived fluids or granitoid-related magmatic fluids, nor do they support a model involving deeply circulated meteoric water.

Economic Geology↗
USGS1997

Precious metals associated with Late Cretaceous-early Tertiary igneous rocks of southwestern Alaska

Placer gold and precious metal-bearing lode deposits of southwestern Alaska lie within a region 550 by 350 km, herein referred to as the Kuskokwim mineral belt. This mineral belt has yielded 100,240 kg (3.22 Moz) of gold, 12, 813 kg (412,000 oz) of silver, 1,377,412 kg (39,960 flasks) of mercury, and modest amounts of antimony and tungsten derived primarily from the late Cretaceous-early Tertiary igneous complexes of four major types: (1) alkali-calcic, comagmatic volcanic-plutonic complexes and isolated plutons, (2) calc-alkaline, meta-aluminous reduced plutons, (3) peraluminous alaskite or granite-porphyry sills and dike swarms, and (4) andesite-rhyolite subaerial volcanic rocks. About 80 percent of the 77 to 52 Ma intrusive and volcanic rocks intrude or overlie the middle to Upper Cretaceous Kuskokwim Group sedimentary and volcanic rocks, as well as the Paleozoic-Mesozoic rocks of the Nixon Fork, Innoko, Goodnews, and Ruby preaccretionary terranes. The major precious metal-bearing deposit types related to Late Cretaceous-early Tertiary igneous complexes of the Kuskokwim mineral belt are subdivided as follows: (1) plutonic-hosted copper-gold polymetallic stockwork, skarn, and vein deposits, (2) peraluminous granite-porphory-hosted gold polymetallic deposits, (3) plutonic-related, boron-enriched silver-tin polymetallic breccia pipes and replacement deposits, (4) gold and silver mineralization in epithermal systems, and (5) gold polymetallic heavy mineral placer deposits. Ten deposits genetically related to Late Cretaceous-early Tertiary intrusions contain minimum, inferred reserves amounting to 162,572 kg (5.23 Moz) of gold, 201,015 kg (6.46 Moz) silver, 12,160 metric tons (t) of tin, and 28,088 t of copper. The lodes occur in veins, stockworks, breccia pipes, and replacement deposits that formed in epithermal to mesothermal temperature-pressure conditions. Fluid inclusion, isotopic age, mineral assemblage, alteration assemblage, and structural data indicate that many of the mineral deposits associated with Late Cretaceous-early tertiary volcanic and plutonic rocks represent geologically and spatially related, vertically zoned hydrothermal systems now exposed at several erosional levels. Polymetallic gold deposits of the Kuskokwim mineral belt are probably related to 77 to 52 Ma plutonism and volcanism associated with a period of rapid, north-directed subduction of the Kula plate. The geologic interpretation suggests that igneous complexes of the Kuskokwim mineral belt formed in an intracontinental back-arc setting during a period of extensional, wrench fault tectonics. The Kuskokwim mineral belt has many geologic and metallogenic features similar to other precious metal-bearing systems associated with arc-related igneous rocks such as the Late Cretaceous-early Tertiary Rocky Mountain alkalic province, the Jurassic Mount Milligan district of central British Columbia, the Andean orogen of South America, and the Okhotsk-Chukotka belt of northeast Asia.

Alaska↗
USGS2018

Cadmium isotope fractionation during coal combustion: Insights from two U.S. coal-fired power plants

Coal combustion, one of the principal energy sources of electricity in the United States, produces over 100 million tons of coal combustion products (CCPs) per year in the U.S. The reuse and disposal of CCPs has the potential to release toxic trace elements, including cadmium (Cd), into the environment. In this study, we investigated CCPs, including bottom ash (BA), economizer fly ash (EFA), and fly ash (FA), as well as feed coal (FC) and pulverized coal (PC) collected from two U.S. coal-fired power plants in New Mexico and Ohio with different coal supplies. The New Mexico plant uses high volatile C bituminous, low-sulfur coals mined from the San Juan Basin (Cretaceous Fruitland Formation) and the Ohio plant uses high volatile A bituminous, high-sulfur central Appalachian Basin coals (Upper Pennsylvanian Monongahela Formation). Mineralogical and elemental analysis showed that these CCP samples consist of ∼70% amorphous Al-Si-rich glasses and ∼30% mineral phases of quartz (SiO 2 ) and mullite (Ai 6 Si 2 O 13 ). The Cd isotope compositions (δ 114 Cd, normalized to NIST Cd standard 3108) of FA and EFA samples (ranging from −0.51 to +0.47‰) are distinctively heavier than those of BA samples (−0.75 to −0.52‰) in both power plants. We interpret this Cd isotope difference as a result of Cd condensation from the gas phase during flue gas cooling, instead of evaporation of Cd phase during coal combustion. Cd condensation is the main process to generate the isotopically heavy Cd signatures that preferentially partition on the fine FA particles. We also investigated Cd isotope compositions in different leachate products from a series of batch-leaching experiments with these CCPs, using diluted acetic acid, hydroxyl ammonium chloride, hydrogen peroxide followed by ammonium acetate, and 5% nitric acid, as a possible means to identify CCP-released Cd in the environment. Unusually and significantly heavier Cd isotope compositions were observed in each leachate of FA samples (+1.10 to +7.09‰), which fall far outside from the range of Cd isotope ratios observed in natural soils and rocks, but less so for the EFA samples (−0.43 to +1.18‰). Such an observation is consistent with the interpretation that isotopically heavy Cd preferentially partitions on the fine FA particles after coal combustion and is readily to be released during these leaching experiments. This study demonstrates that high-temperature coal combustion can lead to a very large degree of fractionation of Cd isotopes that can be used as a unique tracer for identifying anthropogenic metal inputs in the environment. The major Cd isotope fractionation process occurs as the Cd gas phase condenses on fine FA particles during the flue gas cooling stage after coal combustion.

New Mexico, Ohio↗
USGS2002

Historical trends in U.S. mineral statistics for selected non-ferrous metals

Production figures for selected nonferrous metals-aluminum (including bauxite and alumina), copper, lead, tin, titanium, and zinc-by the United States, as well as other statistics for these commodities, show strong volatility during 20th century. Major shifts were driven by the Great Depression and the two World Wars, but other major temporal changes are also noted that are not directly related to such global crises. For example, the price of tin exhibited a strong maximum in the 1980's, which is unrelated to world production, but rather to failed efforts of the International Tin Council to control price. In the case of copper, U.S. exports have varied throughout the second half of the century, by more than a factor of 5. Such volatility might be explained in part by global economic conditions, at least throughout recent decades. Supporting the interpretation of the importance of foreign pressure on the domestic commodities market is a close correlation between domestic consumption of antimony and its elevated price in the mid 1980's,possibly pushed up mostly by the world dominance in production of this commodity by China. However, only very superficial explanations can be advanced for such relations before we have examined, in concert, information for a much larger suite of commodities.

Open-File Report↗
USGS2016

Global stocks of selected mineral-based commodities

Introduction The U.S. Geological Survey, National Minerals Information Center, analyzes mineral and metal supply chains by identifying and describing major components of mineral and material flows from ore extraction, through intermediate forms, to a final product. This report focuses on an important component of the world’s supply chain: the amounts and global distribution of major consumer, producer, and exchange stocks of selected mineral commodities. In this report, the term “stock” is used instead of “inventory” and refers to accumulations of mined ore, intermediate products, and refined mineral-based commodities that are in a form that meets the agreed-upon specifications of a buyer or processor of intermediate products. These may include certain ores such as bauxite, concentrates, smelter products, and refined metals. Materials sometimes referred to as inventory for accounting purposes, such as ore contained in a deposit or in a leach pile, or materials that need to be further processed before they can be shipped to a consumer, are not considered. Stocks may be held (owned) by consumers, governments, investors, producers, and traders. They may serve as (1) a means to achieve economic, social, and strategic goals through government policies; (2) a secure source of supply to meet demand and to mitigate potential shortages in the supply chain; (3) a hedge to mitigate price volatility; and (4) vehicles for speculative investment. The paucity and uneven reliability of data for stocks of ores and concentrates and for material held by producers, consumers, and merchants hinder the accurate estimating of the size and distribution of this portion of the supply chain for certain commodities. This paper reviews the more visible stocks held in commodity exchange warehouses distributed throughout the world.

Scientific Investigations Report↗
USGS2004

Geochronology of the western and central Brooks Range, Alaska: Implications for the geologic evolution of the Anarraaq and Red Dog Zn-Pb-Ag deposits

A compilation of published geochronology of rocks and minerals from the western and central Brooks Range provides a framework for understanding the complex history of the Brooks Range and northern Alaska. A simplified timeline of events comprises (1) Devonian extension, (2) Mississippian extension and Zn-Pb-Ag mineralization, (3) a passive interval, (4) pre-Brooks Range orogeny rock-formation and thermal event, (5) inception of Brooks Range orogeny, (6) exhumation and the end of main-stage deformation, and (7) subsequent episodic deformation. This compilation is supplemented by new 40Ar/39Ar dates of white mica from the Anarraaq and Red Dog Zn-Pb-Ag (+ barite) deposits from the western Brooks Range. The deposits are hosted in black shale and carbonate rocks of the Late Mississippian-Early Pennsylvanian Kuna Formation. Quartz-pyrite-white mica grains in sedimentary rocks above the Anarraaq deposit yield an age of 195.0 ?? 2.0 Ma, and paragenetically late quartz-pyrite-white mica from the Main orebody at the Red Dog deposit has an age of 126.1 ?? 0.7 Ma. These white micas are much younger than the age of Zn-Pb-Ag mineralization at Red Dog (338 ?? 5.8 Ma Re-Os age of pyrite). The date for white mica from Anarraaq (???195 Ma) appears to be related to a large-scale thermal event in the region immediately before the inception of the Brooks Range orogeny. The white mica from the Red Dog deposit (???126 Ma) correlates with the later stages of the orogeny, a period of blueschist metamorphism, extension, and rapid exhumation, which varied with geographic location. These dates suggest that the Red Dog deposits underwent significant hydrothermal overprinting during multiple episodes of the Brooks Range orogeny. ?? 2004 by Economic Geology.

Economic Geology↗
USGS1964

Origin of precambrian iron formations

A statistical study of the chemical composition of the Precambrian iron formations of the Canadian Shield affords a new approach to the origin of these unusual formations . The average total iron content of 2,200 samples from the literature and from unpublished mining company analyses is 26.7 percent Fe. The average Fe content for 16 iron formations in the United States and Canada ranges from 24.5 to 34.1 percent. Low contents of A1203, Ti02, P2O5, and CaO characterize the Precambrian iron formations compared to the relatively large amounts of these constituents in the post- Precambrian iron -bearing sediments. The chemical data emphasize that whereas iron , manganese, and silica were transported and deposited together in the cherty iron formations of the Precambrian , these same elements were chemically differentiated in younger geological time in large but separate deposits of iron and silica. Isotopic age determinations indicate that cherty iron formations were deposited during a long interval of geologic time from approximately 1,700 to 3,000 million years ago. A model is proposed to explain the origin of the iron formations of the Lake Superior type based on the absence or marked deficiency of free oxygen in the atmosphere prior to the Late Precambrian . Lateritic weathering under these conditions permitted the transport of iron and manganese together with silica. The weathered mantle effectively retained aluminum, titanium, phosphorus, and colloidal clay. Graphitic material of biogenic origin is closely associated with the Precambrian iron formations . Although it is uncertain whether iron was precipitated directly through biologic processes, the removal of C02 and the liberation of oxygen to the sea water through photosynthesis of primitive plants undoubtedly influenced the energy relationships among the iron minerals. As a result of the variable conditions the iron formations commonly are characterized by nonequilibrium mineral assemblages. In Late Precambrian time a critical level of free oxygen in the atmosphere was attained permitting a marked acceleration in plant growth and in accretion of oxygen. This stage in the development of an oxygenated atmosphere was reached at least 1,200 million years ago and effectively curtailed the development of cherty iron formations of the Lake Superior type.

Economic Geology↗
USGS2002

Global petroleum resources: A view to the future

It is necessary to periodically reassess petroleum resources, not only because new data become available and better geologic models are developed; but also because many non-geologic factors determine which part of the crustal abundance of petroleum will be economic and acceptable over the foreseeable future. In 2000, the U.S. Geological Survey completed an assessment of the world's conventional petroleum resources, exclusive of the United States. This assessment is different from those before it: Overall the 2000 assessment of potential petroleum resources is higher than previous assessments, largely because it is the first USGS world assessment to include field growth estimates. Based on a thorough investigation of the petroleum geology of each province, the assessment couples geologic analysis with a probabilistic methodology to estimate remaining potential. Including the assessment numbers for the United States from USGS and the Minerals Management Service (MMS), the world's endowment of recoverable oil - which consists of cumulative production, remaining reserves, reserve growth and undiscovered resources - is estimated at about 3 trillion barrels of oil. Of this, about 24 percent has been produced and an additional 29 percent has been discovered and booked as reserves. The natural gas endowment is estimated at 15.4 quadrillion cubic feet (2.5 trillion barrels of oil equivalent), of which only about 11 percent has been produced and an additional 31 percent has been discovered and booked as reserves. The USGS assessment is not exhaustive, because it does not cover all sedimentary basins of the world. Relatively small volumes of oil or gas have been found in an additional 279 provinces, and significant accumulations may occur in these or other basins that were not assessed. The estimates are therefore conservative.

Geotimes↗
USGS2009

Mineral Resource Assessment of Marine Sand Resources in Cape- and Ridge-Associated Marine Sand Deposits in Three Tracts, New York and New Jersey, United States Atlantic Continental Shelf

Demand is growing in the United States and worldwide for information about the geology of offshore continental shelf regions, the character of the seafloor, and sediments comprising the seafloor and subbottom. Interest in locating sand bodies or high quality deposits that have potential as sources for beach nourishment and ecosystem restoration is especially great in some regions of the country. The Atlantic coast, particularly New York and New Jersey, has been the focus of these studies for the past 40 years with widely varying results. This study is the first attempt at applying probability statistics to modeling Holocene-age cape-and ridge-associated sand deposits and thus focuses on distinct sand body morphology. This modeling technique may have application for other continental shelf regions that have similar geologic character and late Quaternary sea-level transgression history. An estimated volume of 3.9 billion m3 of marine sand resources is predicted in the cape-and ridge-associated marine sand deposits in three representative regions or tracts on the continental shelf offshore of New York and New Jersey. These estimates are taken from probabilistic distributions of sand resources and are produced using deposit models and Monte Carlo Simulation (MCS) techniques. The estimated sand resources presented here are for only three tracts as described below and for Holocene age sand resources contained in cape-and ridge-associated marine sand deposit types within this area. Other areas may qualify as tracts for this deposit type and other deposit types and geologic ages (for example, paleo-stream channels, blanket and outwash deposits, ebb-tide shoals, and lower sea level-stand deltas), which are present on the New Jersey and New York continental shelf area but are not delineated and modeled in this initial evaluation. Admittedly, only a portion of these probable sand resources will ultimately be available and suitable for production, dependent largely on geographic, economic, preemptive use, environmental, geologic and political factors. In addition, offshore sand resources should only be considered if the area is seaward of the active zone of significant nearshore sediment transport, about 10 to 12 m in depth, and in sufficiently shallow water so that sand can be extracted within U.S. dredging equipment limits, currently about 40 m in depth. If the material is to be used for beach nourishment, material must be of an appropriate sediment texture and character (grain size, sorting, shape, and color) to match the native beach and have mineralogical properties important to its use. Extraction of sand can disturb or alter the benthic habitat and seafloor ecology, so these factors and other site-specific effects will need to be evaluated for any intended use. These and other factors are not considered in this report but can be expected to reduce the total net volume of sand resources available for production. The purpose of this report is to describe and present results from a probabilistic mineral modeling technique previously applied to onshore mineral resources. This modeling and assessment procedure is being used for the first time to assess and estimate offshore aggregate resources; this study is part of the U.S. Geological Survey (USGS) Marine Aggregates Resources and Processes Project (http://woodshole.er.usgs.gov/project-pages/aggregates/).

Bulletin↗
USGS1993

International strategic minerals inventory summary report; niobium (columbium) and tantalum

Major world resources of niobium and tantalum are described in this summary report of information in the International Strategic Minerals Inventory (ISMI). ISMI is a cooperative data-collection effort of earth-science and mineral-resource agencies in Australia, Canada, the Federal Republic of Germany, the Republic of South Africa, the United Kingdom, and the United States of America. Part I of this report presents an overview of the resources and potential supply of niobium and tantalum based on inventory information; Part II contains tables of both geologic and mineral-resource information and includes production data collected by ISMI participants. Niobium is used principally as an alloying element in special steels and superalloys, and tantalum is used mainly in electronics. Minerals in the columbite-tantalite series are principal ore minerals of niobium and tantalum. Pyrochlore is a principal source of niobium. These minerals are found in carbonatite, certain rocks in alkaline igneous complexes, pegmatite, and placer deposits. ISMI estimates show that there are over 7 million metric tons of niobium and almost 0.5 million metric tons of tantalum in known deposits, outside of China and the former Soviet Union, for which reliable estimates have been made. Brazilian deposits, followed by Canadian deposits, contain by far the largest source of niobium. Tantalum production is spread widely among several countries, and Brazil and Canada are the most significant of these producers. Brazil's position is further strengthened by potential byproduct columbite from tin mining. Present economically exploitable resources of niobium appear to be sufficient for the near future, but Brazil will continue to be the predominant world supplier of ferrocolumbium. Tantalum, a byproduct of tin production, has been captive to the fluctuations of that market, but resources in pegmatite in Canada and Australia make it likely that future increases in the present modest demand will be met.

Circular↗
USGS1968

Chronology of intrusion, volcanism, and ore deposition at Bingham, Utah

Potassium-argon dates for major igneous rock types in the Bingham mining district, Utah, range from 39 to 32 m.y. and suggest that:(1) Plutonism, volcanism, and hydrothermal activity were sequential stages in a magmatic history of about 7 m.y. duration.(2) Latitic volcanic rocks, in part, postdate emplacement of the Last Chance and Bingham stocks.(3) Sulfide mineralization and hydrothermal alteration followed emplacement of the monzonitic stocks and extrusion of at least the earliest units in the volcanic sequence; the time interval between intrusion and alteration was probably less than 1 m.y.(4) The rhyolites of Shaggy Peak, which may represent terminal differentiation products in a comagmatic series, are the youngest igneous rocks in the area.

Utah↗