USGS Science⌕ Search

SEARCH · USGS Science

Results for “Hydrology and Earth Systems Science”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

1,661 records · Page 47Linked to original sources
USGS2025

Estimating agricultural irrigation water consumption for the High Plains aquifer region with integrated energy- and water-balance evapotranspiration modeling approaches

Estimation of irrigation water use provides essential information for the management and conservation of agricultural water resources. Conventionally, water use data are created based on reports and surveys from water users, whereas manual records may not be complete due to lacking flow meters, measurement gaps, inconsistent methods across regions, and time- and cost-consuming data processing. Alternatively, spatially explicit estimation of irrigation water use can be conducted efficiently using remote sensing evapotranspiration (ET) modeling approaches. In this study, we created a gridded blue water evapotranspiration (BWET) dataset to estimate historical irrigation water consumption (1986 – 2020) in the croplands across the United States High Plains aquifer region. The BWET data were generated by integrating an energy-balance ET model [Operational Simplified Surface Energy Balance model (SSEBop)] and a water-balance ET model [Vegetation ET model (VegET)]. BWET in croplands indicates crop consumptive use of irrigation water extracted from surface water and groundwater resources. The BWET estimates were compared with reported irrigation water use data for all counties within the aquifer region. The results revealed high agreement between growing season (May – September) BWET and annual water withdrawal at county level. Specifically, correlation coefficients of volumetric BWET and water withdrawal were 0.90 and 0.96, respectively, for the entire aquifer region and western Kansas. The timeseries of BWET and water withdrawal showed similar temporal trends and high covariations. The BWET estimates were systematically lower than the water withdrawal measurements, which was primarily attributed to blue water losses in the irrigation system. The irrigation efficiency, calculated as the ratio of BWET to water withdrawal depth, was 0.57 and 0.74 for the entire aquifer region and western Kansas, respectively. This study demonstrates the capability of using satellite-based ET models (e.g., SSEBop and VegET) to efficiently estimate crop water consumption and evaluate irrigation efficiency at landscape, county, and regional scales.

Colorado, Kansas, Nebraska, New Mexico, Oklahoma, ↗
USGS2024

Assessment of fresh groundwater discharge and saline surface-water intrusion at Operable Unit 2, North Chevalier Field Disposal Area (Site 11), Naval Air Station Pensacola, Florida, 2018–22

Site 11 is a former landfill at North Chevalier Field Disposal Area in Operable Unit 2 at Naval Air Station Pensacola, in northwest Florida. Site 11 is adjacent to Bayou Grande, a shallow, tidally influenced, saline estuary of the Pensacola Bay watershed. Federal and Florida regulators have expressed concern that contaminants detected in groundwater beneath the inland parts of Site 11 may discharge to Bayou Grande. In 2017, the Department of Defense, U.S. Navy, Naval Facilities Engineering Systems Command Southeast asked the U.S. Geological Survey to assess the occurrence of fresh groundwater discharge to Bayou Grande at Site 11 and to delineate to the extent practicable the location of groundwater discharge. Between 2018 and 2022, the U.S. Geological Survey used a multiple-lines-of-evidence approach that included a visual method and three physical methods based on the temperature difference between groundwater and surface water to assess groundwater discharge. One of the physically based methods also used the difference in specific conductance between fresh groundwater and brackish to saline surface water. Combined, the data indicate that fresh groundwater from across Site 11 discharges primarily along the shoreline of the northern and northeastern part of Site 11. The data also indicate that saline surface water from Bayou Grande intrudes tens of feet into the shallow aquifer beneath Site 11. The combined data indicate that the interface between fresh groundwater and saline surface water changes over space and time. Any new monitoring wells proposed for installation near the shoreline of Site 11 should include approaches to monitor the changes in the location of the freshwater/saltwater interface. Care would need to be taken to collect any groundwater samples at the correct season and tidal period to provide the highest probability of collecting a representative sample of Site 11 groundwater unaffected by saltwater.

Florida↗
USGS2026

Navigating uncertainty and competing objectives: Spring chinook salmon recovery in the upper Willamette river

Globally, anadromous fish populations are threatened with extinction due to multiple factors, including river impoundments that block migration, widespread alteration of physical habitat, temperature, and flow regimes, commercial and recreational harvest, changes in biological communities, and long-term climate trends. In this synthesis, we describe how physical and biological factors, policy and law, and public resource allocation affect management of spring-run Chinook Salmon ( Oncorhynchus tshawytscha ) in the Upper Willamette River (UWR), Oregon, USA. Efforts to restore salmon populations often involve trade-offs, for example, water management decisions must account for flood control, agricultural and municipal water use, and management of other species. UWR Chinook Salmon recovery efforts are also governed by multiple laws, policies, and action agencies that in some cases have incongruent objectives. Competing and conflicting objectives, combined with uncertainty regarding the outcomes of proposed management actions, create significant challenges for decision makers. Resource limitations, regulatory constraints, and incongruent objectives have created challenges for managers in the UWR, but opportunities exist for improved adaptive management and collaboration, which could build trust and engagement among stakeholders and ultimately support the successful implementation of decision tools. A suite of decision support tools that have been used in the Willamette River basin and elsewhere across the range of Pacific salmon have the potential to enhance decision processes. These tools can be effective when decision makers and stakeholders commit to long-term, collaborative utilization of the tools for decision making, and when available resources and regulatory environments are conducive to implementation and adaptive refinement of both the decision-support tools and management plans. The general biological and institutional principles discussed for UWR Chinook Salmon in this work apply more generally to populations of anadromous fishes across their range, especially to populations in highly regulated river systems.

Oregon↗
USGS2026

Bathymetric survey and storage capacity of Upper Lake Mary near Flagstaff, Arizona in 2024

The U.S. Geological Survey (USGS), in cooperation with the city of Flagstaff, collected bathymetric, light detection and ranging (lidar), and land-survey data of Upper Lake Mary in Arizona during the months of April and October 2024. The city of Flagstaff uses a combination of groundwater from well fields throughout the Flagstaff area and surface water, mainly from Upper Lake Mary, for its potable water supply. The purpose of the survey is to update previous surveys using new technology and compare the results to previous surveys to determine if there was a decrease in storage capacity that could affect the city’s water supply. The lakebed was mapped in April 2024 using a vessel equipped with a multibeam echosounder (MBES) and mobile lidar scanner with positioning captured using a real-time kinematic global navigation satellite system (RTK GNSS) base and receivers. In October 2024, areas of the reservoir that were too shallow for the boat and shoreline that were not captured by the vessel-based lidar were surveyed on foot using hand-held RTK GNSS receivers. At full pool (spillway elevation of 6,831.82 feet above NAVD 88 [2,082.34 meters (m)], Upper Lake Mary has a storage capacity of 16,449.80 acre-feet (20,290,611.73 cubic meters) and a surface area of 953.57 acres (3,860,926.075 square meters). The reservoir is 5.7 miles (9.7 kilometers) long and varies in width from 326 feet (99.36 m) near the central, narrow portion of the reservoir to 2,613 feet (796.44 m) in the upper portion. Comparisons between this survey and the previous two surveys from the 1950s and 2006 indicate no apparent decrease in reservoir area or storage capacity. Results of the 2024 survey indicate that Upper Lake Mary’s storage capacity increased by 0.9 percent from the 2006 survey and a 1.6 percent increase in surface area from the 2006 survey.

Arizona↗
USGS2024

Fairweather transform boundary Oligocene to present orogenesis: Fairweather Range vertical extrusion and rotation of the Yakutat microplate at ca. 3 Ma

Oblique-slip along transform fault boundaries is often partitioned between a strike-slip system and thrust faults that accommodate contraction. However, topography along the Yakutat-North American transform (Fairweather fault), is asymmetric with low-terrain above active thrusts on the western, Yakutat side of the transform and high topography on the continental side with peaks >4500 m (Mount Fairweather: 4671 m) to the west of the Border Ranges fault, limited recorded earthquakes >M4, and no apparent reverse faults to generate the highest terrain. In this study we compile, for the first time, published U-Pb zircon, 40 Ar/ 39 Ar and K-Ar (hornblende, muscovite, and biotite) and U-Th/He and fission-track (zircon and apatite) bedrock ages (109) from 75 samples to investigate the exhumation history of the Fairweather Range region, complemented by a published detrital sample (ZFT and AFT) and 13 new 40 Ar/ 39 Ar (hornblende, biotite, and K-feldspar) ages on 9 bedrock samples from both sides of the Fairweather fault. Additionally, we examined published seismicity and geodetic data of the Fairweather region and assessed if plate paleo-vectors correlate with the cooling history of the Fairweather Range. Cooling age, seismic, and block-motion patterns indicate the Fairweather Range has been vertically extruded between the Fairweather and the Border Ranges faults as a coherent block since ca. 25 Ma. The pre-6 Ma Pacific plate motion (N30°W) aligns with the N33°W strike of the Fairweather Fault whereas a hypothetical pre-6 Ma Yakutat microplate paleo-vector of (N39°W) does not: indicating a post-6 Ma timing for Yakutat microplate counter-clockwise rotation (9°). We infer that rotation and impingement of the Yakutat microplate along the Fairweather fault at ca. 3 Ma led to the development of the Fairweather restraining bend and increased cooling rates. The resultant thickened Fairweather welt and the ∼30 km thick southeast end of the Yakutat microplate compounded double-indenter tectonics into Alaska's southeast convergent corner

Tectonophysics↗
USGS2025

Structural analysis of brittle-plastic shear zones in the Sangre de Cristo Range, southern Colorado USA: Superposition of Rio Grande rift extension on Laramide contraction

The Sangre de Cristo Range in southern Colorado exposes some of the deepest Cenozoic structural levels in the Rocky Mountain region, including mylonitic shear zones associated with both the Laramide orogeny and Rio Grande rift. We investigated the relation between Laramide contraction and Rio Grande rift extension with detailed geologic mapping, kinematic analysis, and geochronometry in a 50 km 2 area centered on the Independence Mine shear zone (IMSZ). The 15−100-m-thick IMSZ is one of several shallowly to moderately (∼45° ± 20°) W-SW−dipping brittle-plastic shear zones along the western flank of the range. These shear zones display microstructural evidence of initiation as top-NE contractional mylonite zones, consistent with regional Laramide kinematics, which have been pervasively overprinted by shear fabrics indicating top-SW extensional reactivation. Both top-NE and top-SW shear fabrics involve cataclasis and quartz dislocation creep, although top-SW shear is more commonly localized along phyllosilicate-lined shear bands. Shear zones are hosted predominately within Proterozoic gneiss, and contain abundant chlorite and white mica derived from alteration of hornblende and feldspar, which indicates that weakening driven by fluid reactions played an important role in localizing strain. Extensional overprinting appears to be most pervasive along more steeply dipping portions of shear zones and where secondary phyllosilicates form an interconnected weak phase, which suggests that reactivation was primarily controlled by geometry and rheological contrasts inherited from contraction. One top-SW shear zone adjacent to the IMSZ cuts a late Oligocene gabbro stock, and monazite grains synkinematic with top-SW shear in the IMSZ yielded late Oligocene to Early Miocene U-Th-Pb dates that correspond with initiation of the Rio Grande rift. Reactivation of weak reverse faults may represent an important structural control during initial extension in the middle crust, prior to slip along the high-angle Sangre de Cristo normal fault system.

Colorado↗
USGS2025

Groundwater-level elevations in the Denver Basin bedrock aquifers and Upper Black Squirrel Creek alluvial aquifer, El Paso County, Colorado, 2021–24

El Paso County is the second-most populous county in Colorado and is projected to grow another 15 percent by 2030. Within El Paso County is the Upper Black Squirrel Creek Designated Groundwater Basin (Black Squirrel Basin), an area where surface water is scarce and water users rely primarily on groundwater from five different aquifers (the Upper Black Squirrel Creek alluvial aquifer and four bedrock aquifers within the Denver Basin aquifer system: the lower Dawson, Denver, Arapahoe, and Laramie-Fox Hills aquifers) to meet their needs. Currently (2024), land within the Upper Black Squirrel Creek Basin is primarily used for rural grazing and agriculture; however, municipal development is ongoing. In 2021, the U.S. Geological Survey, in cooperation with the Upper Black Squirrel Creek Ground Water Management District, began a study to establish a baseline dataset and assess the groundwater resources of the aquifers within the Black Squirrel Basin. A network of 39 wells was established in 2021; discrete groundwater-level measurements were made bimonthly. Nine of the 39 wells were equipped with pressure transducers to record hourly groundwater-level data. Seven wells had statistically significant seasonal trends, and trends at 3 wells were negative. For the discrete data, 16 wells had a significant trend for the study period, and 4 wells had negative trends. For the time-series data, 8 wells had significant trends, and 3 wells had negative trends. Potentiometric surface maps were created for this study using discrete, static groundwater levels measured in April 2023. These maps showed the estimated groundwater flow direction from the north-northwest to the south-southeast in the alluvial aquifer and from the northwest to the east-southeast for the lower Dawson and Denver aquifer wells. This study indicates the potential benefit of monitoring wells in the areas near municipal pumping. Additional monitoring could lead to a better understanding of connectivity between aquifers and be an important tool for assessing long-term sustainability of groundwater use.

Colorado↗
USGS2025

Evaluating mass flow meter measurements from chambers for greenhouse gas emissions from orphan wells and other point sources

This study evaluates the performance of a rigid gas flux chamber equipped with a mass flow meter (MFM) for measuring gas emissions from leaking orphan wells and similar pressure-driven gas point sources. We conducted a series of laboratory and field experiments to evaluate the sensitivity, stability, and dynamic range of an MFM chamber system and found an optimal method for sealing the chamber to the ground to isolate the emission source. From these results, we estimate the effects of different soil gas permeabilities on measurements and identify the uncertainty of environmental processes that can impact measurements. Simulations of an MFM chamber are compared to those of a dynamic flux chamber to contrast the data derived with both methodologies and illustrate the potential for measuring high variability leaks with the MFM chamber. Using a low flow resistance MFM and a chamber well-sealed to the ground, it is possible to measure leaks down to 1.08 x 10 -3 cubic meters per hour (m 3 h −1 ) (refenced to 25°/1 atm), corresponding to 0.77 grams per hour (g h −1 ) methane or 2.11 g h −1 carbon dioxide, with a mean uncertainty of 0.89 % relative standard deviation. Environmental processes such as heated gas inside the chamber from solar gain, wind blowing across the chamber vent, and changing humidity in the chamber, can cause variation in MFM measurements. Over 11 d of continuous monitoring under varying weather conditions, the standard deviation of the environmentally sourced signals was found to be 7.40 x 10 -3 m 3 h −1 (equivalent to or 5.27 g h −1 methane or 14.45 g h −1 carbon dioxide). Strategies to obtain the highest quality data from MFM chambers include burying the edges of the chamber below the surface sufficiently deep to seal the chamber edges against gas flow and soaking the dirt with water to lower the chances of escaping gases, while monitoring the gas flow and adjusting the chamber seal to achieve a maximum flow rate.

Atmospheric Measurement Techniques↗
USGS2024

3-D geological modeling for numerical flow simulation studies of gas hydrate reservoirs at the Kuparuk State 7-11-12 Pad in the Prudhoe Bay Unit on the Alaska North Slope

Accurate reservoir evaluation requires reliable three-dimensional (3-D) geological models. This study conducted 3-D geological modeling for numerical flow simulation of the B1 sand gas hydrate reservoir at the Kuparuk State 7-11-12 pad, Prudhoe Bay Unit, Alaska North Slope. The model integrates well logs, core, and seismic data to address spatial heterogeneity in geological structures and reservoir properties. Two modeling types were performed: structural framework modeling and petrophysical property modeling. For structural framework modeling, seismic data and well log markers were used to reproduce subsurface structures characterized by a normal fault system. A volume-based modeling algorithm and stair-step gridding were applied. The resulting 3-D model comprised 2,640,000 grid cells across 264 layers, including seven fault grids. For petrophysical property modeling, total porosity was initially modeled using sequential Gaussian simulation with collocated cokriging. To reproduce the upward coarsening of the B1 sand, upscaled log-derived total porosity and a 3-D trend depicting total porosity variation were used as primary and secondary data, respectively. Gas hydrate saturation distribution was modeled similarly, with secondary data from estimated porosity distribution and seismic-derived acoustic impedance map enhancing accuracy. Results indicate higher gas hydrate saturation in the upper part of the B1 sand and areas with higher acoustic impedance. Intrinsic permeability was modeled from the total porosity and clay-bound water volume, and effective permeability was derived from the gas hydrate saturation and intrinsic permeability distributions based on the “Tokyo model”. Effective permeability distributions were influenced by the total porosity, gas hydrate saturation, and intrinsic permeability. Within the same layer, higher gas hydrate saturation leads to decreased effective permeability. In total, 100 sets of multiple scenarios were prepared, providing input data for dynamic flow simulations to evaluate the effects of lateral heterogeneity in reservoir properties and the hydraulic characteristics of faults on production behavior for preassessment before the long-term production test.

Alaska↗
USGS2025

Reservoir thermal energy storage pre-assessment for the United States

Storing thermal energy underground for later use in electricity production or direct-use heating/cooling is a promising, viable, and economical green energy option. Reservoir thermal energy storage (RTES) is one such option, which stores energy in underutilized permeable strata with low ambient groundwater flow rates and more geochemically evolved (e.g. brackish/saline) waters relative to overlying principal aquifer systems. The U.S. Geological Survey has begun assessing RTES potential nationally by focusing on five generalized geologic regions (Basin and Range, Coastal Plain, Illinois Basin, Michigan Basin, Pacific Northwest) across the United States. Hydrogeologic reservoir models are developed for the following eight metropolitan area cities within those regions to evaluate RTES performance across different climates and subsurface conditions: Albuquerque, New Mexico; Charleston, South Carolina; Chicago and Decatur, Illinois; Lansing, Michigan; Memphis, Tennessee; Phoenix, Arizona; and Portland, Oregon. Evaluated metrics include estimated required well spacing, thermal storage capacity, and thermal recovery efficiency through time. Also considered for each reservoir are potential complicating factors, including reservoir depth, thermally driven free convection, and groundwater salinity. This work focuses on direct-use cooling because the need for cooling modern office buildings greatly exceeds that for heating in most parts of the country (Falta and others, 2016); however, the evaluated metrics are also relevant to heating and electricity applications. Results indicate that favorable RTES conditions exist in each region, with the Coastal Plain and Basin and Range being especially favorable for thermal storage capacity, while the Pacific Northwest and Michigan Basin excel at energy recovery for the evaluated cooling application. The results underscore the utility of developing maps of thermal storage capacity, subsurface temperature models, and volumetric estimates of thermal storage capacity to serve as key RTES resource classification standards. Overall, this pre-assessment provides a basic understanding of RTES potential in several cities and geologic regions throughout the country and will aid ongoing thermal energy storage assessment efforts.

Arizona, Illinois, Michigan, New Mexico, Oregon, S↗
USGS2025

Land cover change within wetland complexes at Dixie Meadows, Churchill County, Nevada: 2015 – 2023

Dixie Meadows, Nevada, is a system of geothermal springs and seeps that feed a complex of marshes and wetland meadows that are located within lands managed by the Bureau of Land Management (BLM) and the Department of Defense (DOD). A previous U.S. Geological Survey report documented variability in satellite imagery-based land cover classifications for seven wetland complexes at near monthly time intervals between October 2015 and January 2022. This report presents additional data, extending analysis to November 2023. Land cover classifications between October 2015 and November 2023 demonstrated an association between vegetation cover characteristics and surface moisture, with Class 1 having dry, bare soil or sparse upland vegetation, Class 2 having moist, bare soil or sparse to small vegetation, Class 3 having dense green vegetation with potentially saturated soil conditions, Class 4 having a mix of shallow surface water, saturated soil, and dense green vegetation, and Class 5 having open surface water. Most of the wetland complexes occur close to spring outflows primarily within land managed by the DOD, though portions are also within BLM lands. The intervening and surrounding landscape outside of the wetland complexes assessed in this study are managed by the BLM. As a result, Class 1 land covers had the largest areal coverage for BLM managed lands. Classes 2 and 3 land covers were primarily mapped inside the wetland complexes and thus had the largest area coverage within DOD managed lands. Class 4 was almost exclusively mapped within the wetland complexes and thus was largely contained within DOD managed lands. Class 5 (open water) was exclusively mapped in and adjacent to a single wetland complex with catchment ponds on land managed by the BLM. The distribution of these land cover classes over the study period was seasonally and annually variable. Land cover areas of Classes 1 and 2 were larger during the spring months. Conversely, land cover areas of Classes 3 and 4 tended to be greatest during the summer or fall. These patterns might be influenced by differences in seasonal water sources and phenology.

Nevada↗
USGS2024

A comparative analysis of OpenET for evaluating evapotranspiration in California almond orchards

The almond industry in California faces water management challenges that are being exacerbated by droughts, climate change, and groundwater sustainability legislation. The Tree-crop Remote sensing of Evapotranspiration eXperiment (T-REX) aims to explore opportunities to improve precision irrigation management for woody perennial cropping systems. Almond orchards in the California Central Valley were equipped with eddy covariance flux measurements to evaluate satellite remote sensing-based evapotranspiration (RSET) models. OpenET provides high-resolution (30-m spatial and daily temporal) RSET data, synthesizing decades of research for practical water management. This study provides an evaluation of OpenET performance at six almond sites covering a large range in soils, age, and variety. It also compares OpenET ensemble evapotranspiration (ET) data with applied irrigation and precipitation records over an additional 148 almond orchards located in the Central Valley of California. Results show OpenET models, including the ensemble ET value, produced reasonable and actionable ET values, with overall coefficient of determination (R 2 ) and mean absolute error values of 0.73- and 0.95-mm d −1 at the daily time step, respectively. However, given the temporal sampling of Landsat (8-day revisit) and the interpolation methods used, the assessed ET models had difficulty in capturing short-term variability in almond ET; for example, the rapid decline in measured ET observed as a response to lack of irrigation preceding and during almond harvest. The study also drew attention to the spatial complexity in scenarios where irrigated orchards are surrounded by hot/dry areas, causing discrepancies between measured and modeled ET values. In comparison with irrigation records, OpenET ensemble ET was capable of quantifying water input (applied irrigation + precipitation) in almond orchards to within 13 % when evaluating monthly data. Initial results presented here reinforce the idea that RSET models, such as in OpenET, are powerful tools, yet their application requires nuanced understanding and careful consideration of local conditions.

California↗
USGS2026

The eruptive behavior of distributed volcanism forming low shield edifices—A case study of Sentinel-Arlington volcanic field, U.S.A.

Distributed volcanic fields are present in various tectonic settings worldwide, and their characteristics reflect differing influences from magmatic and tectonic processes. In the southwestern United States alone, there are 37 Quaternary distributed volcanic fields. After the primary period of extensional tectonics in the southern Basin and Range 15–5 million years ago, the Sentinel-Arlington volcanic field developed in southwestern Arizona between 4 and 1 million years ago. The Sentinel-Arlington volcanic field consists primarily of low relief shield volcanoes, a type of distributed volcanism with poorly understood temporal evolution. The Sentinel-Arlington volcanic field is less than 200 kilometers (km) from the Colorado Plateau, Gulf of California, and southern San Andreas Fault system. This work identifies and examines controls on the emplacement of the Sentinel-Arlington volcanic field by documenting shallow and surficial structures as well as eruption characteristics and style through time. The Sentinel-Arlington volcanic field consists of 21 volcanoes with a total of 33 vents over an area of about 770 square kilometers (km 2 ). The prominence of low relief shield volcanoes may be explained by ascent of basaltic magmas through thin Basin and Range crust, without much crustal contamination, and low viscosities common to mafic compositions. Typical eruption characteristics involve the construction of low relief shield volcanoes followed by Strombolian fissure eruptions at the summits or near-summit medial areas that produce scoria lapilli, which may weld to form agglomerate. The total lifetime erupted volume of about 4.3 cubic kilometers (km 3 ) represents an average eruptive flux of approximately 2x10 -3 km 3 per thousand years (k.y.). This erupted volume is low relative to Neogene basaltic intraplate distributed volcanic fields worldwide, which typically range from 10 -3 to 1 km 3 k.y. -1 . Sentinel-Arlington volcanic field eruptions were likely triggered by intermittent rejuvenation of transient magmatic zones that exist in thinned crust. Instantaneous flux from point sources feeding the lava flows is estimated to be on the order of 10 -1 to 10 cubic meters per second.

Arizona↗
USGS2024

Distribution of ancient carbon in groundwater and soil gas from degradation of petroleum near the Red Hill Bulk Fuel Storage Facility, O‘ahu, Hawai‘i

The groundwater below the Red Hill Bulk Fuel Storage Facility (the facility) in Oʻahu, Hawaiʻi, contains fuel compounds from past spills. This study used carbon-14 analyses to distinguish fuel-derived carbon from background carbon, along with other biodegradation indicators, to address two goals: (1) determine the extent and migration direction of groundwater affected by residual fuel below the facility and (2) determine if residual fuel locations in the subsurface could be identified by analyzing soil gas at the surface above the facility. Groundwater from 19 wells was sampled between September 2022 and April 2023. Nonvolatile dissolved organic carbon (NVDOC) from a well presumed to be unaffected by past spills contained 38 percent ancient carbon indicating a natural source of ancient carbon in the subsurface. The NVDOC concentrations and ancient carbon percentages indicate fuel biodegradation products are likely present on the north and south of Red Hill with the greatest effects at well RHMW02 near the 2014 spill site. The NVDOC concentrations are almost three times higher than diesel range organic (DRO) concentrations in groundwater from the same sites. Major ion data indicate that iron reduction is an important biodegradation process. Soil probe samples and soil carbon traps were used to determine the carbon-14 content of soil carbon dioxide. Ancient carbon from fuel biodegradation was not detected at any soil probe or carbon trap site in contrast to a 2017 study which reported ancient carbon detections. A reanalysis of the 2017 results using a range of local values for background carbon-14 indicates that ancient carbon from fuel biodegradation was probably only detected in lower tunnel exhaust system samples and not in any soil carbon trap samples. Measurements of carbon dioxide efflux with a dynamic closed chamber were highly variable. The soil gas results indicate that soil gas measurements at land surface were not useful for detecting residual fuel at the facility.

Hawaii↗
USGS2025

Bathymetric contour maps, surface area and capacity tables, and bathymetric change maps for selected water-supply lakes in Missouri, 2022–23

Bathymetric data were collected at 13 water-supply lakes around the periphery of Missouri by the U.S. Geological Survey in cooperation with the Missouri Department of Natural Resources and various local agencies, as part of a multiyear effort to establish or update the surface area and capacity tables for the surveyed lakes. Surveys were carried out during the months of April and May in 2022 and 2023. All but two of the lakes had been surveyed previously by the U.S. Geological Survey, and the recent surveys were compared to the earlier surveys to document the changes in the bathymetric surface and capacity of the lake. Bathymetric data were collected using a high-resolution multibeam mapping system mounted on a boat. Supplemental depth data at three of the lakes were collected in shallow areas with an acoustic Doppler current profiler on a remote-controlled boat. Data points from the various sources were exported at a gridded data resolution appropriate to each lake, either 0.82 foot, 1.64 feet, or 3.28 feet. Data outside the multibeam survey extent and greater than the surveyed water-surface elevation were obtained from data collected using aerial light detection and ranging (lidar) point cloud data. A linear enforcement technique was used to add points to the dataset in areas of sparse data (the upper ends of coves where the water was shallow or aquatic vegetation precluded data acquisition) based on surrounding multibeam and upland data values. The various point datasets were used to produce a three-dimensional triangulated irregular network surface of the lake-bottom elevations for each lake. A surface area and capacity table was produced from the three-dimensional surface for each lake showing surface area and capacity at specified lake water-surface elevations. Various quality-assurance tests were conducted to ensure quality data were collected with the multibeam, including beam angle checks and patch tests. Additional quality-assurance tests were conducted on the gridded bathymetric data from the survey, the bathymetric surface created from the gridded data, and the contours created from the bathymetric survey.

Missouri↗
USGS2024

Shallow storage of the explosive Earthquake Flat Pyroclastics magma body, Okataina Volcanic Center, Taupo Volcanic Zone, New Zealand: Evidence from phase-equilibria experiments

Rhyolitic tuffs range widely in their crystal contents from nearly aphyric to crystal-rich, and their crystal cargoes inform concepts of upper crustal magma reservoirs. The Earthquake Flat pyroclastics (Okataina Volcanic Center, Taupo Volcanic Zone, New Zealand) are 10 km 3 of rhyolitic tuffs with abundant (~ 40 vol.%) plagioclase and quartz, minor biotite, hornblende, and orthopyroxene, and accessory Fe-Ti oxides, apatite, and zircon, set in high-silica rhyolitic glass. Major minerals form large, euhedral phenocrysts and abundant glomerocrysts with few disequilibrium textures excepting some faintly resorbed quartz. Plagioclase phenocrysts have thick rims of nearly constant composition near An 30 , and hornblende is weakly zoned or unzoned. The abundant and texturally complex mineral assemblage contrasts with the nearby (~ 25 km), nearly synchronous, but more voluminous and crystal-moderate rhyolite tuffs from Rotoiti caldera. New H 2 O-saturated phase-equilibria results on the erupted Earthquake Flat melt (glass) determine its co-saturation with the partial phenocryst assemblage of plagioclase, quartz, biotite, and Fe-Ti oxides at: 140 MPa, 755 ºC. These closely approximate the conditions of the pre-eruptive magma body assuming it was saturated with nearly pure H 2 O and at an f O 2 of ~ Ni–NiO. Absence of hornblende and orthopyroxene from the synthesized assemblages may result from those minerals being in a peritectic reaction relation with melt to produce biotite, so they would not grow from the liquid used as starting material. Experimental results on Rotoiti rhyolite (Nicholls et al. 1992) show that the two bodies resided at similar pressures, temperatures, and f O 2 s. Lower crystal abundance of the Rotoiti tuffs may result from slight compositional differences. We interpret that the Earthquake Flat pyroclastics were sourced from the crystal-rich periphery of a mushy reservoir system with the Rotoiti occupying a more melt-rich central location. Uncertain is whether this was a single intrusion zoned continuously in crystallinity, or discrete adjacent intrusions, but our results illustrate and quantify complexities of magma storage across relatively short distances.

North Island, Taupo Volcanic Zone↗
USGS2024

Layered intrusions in the Precambrian: Observations and perspectives

Layered intrusions are plutonic bodies of cumulates that form by the crystallization of mantle-derived melts. These intrusions are characterized by igneous layering distinguishable by shifts in mineralogy, texture, or composition. Layered intrusions have been fundamental to our understanding of igneous petrology; however, it is their status as important repositories of critical metals – such as platinum-group elements, chromium, and vanadium – that has predominantly driven associated research in recent decades. Many layered intrusions were emplaced during the Precambrian, predominantly at the margins of ancient cratons during intervals of supercontinent accretion and destruction. It appears that large, layered intrusions require rigid crust to ensure their preservation, and their geometry and layering is primarily controlled by the nature of melt emplacement. Layered intrusions are best investigated by integrating observations from various length-scales. At the macroscale, intrusion geometries can be discerned, and their presence understood in the context of the regional geology. At the mesoscale, the layering of an intrusion may be characterized, intrusion-host rock contact relationships studied, and the nature of stratiform mineral occurrences described. At the microscale, the mineralogy and texture of cumulate rocks and any mineralization are elucidated, particularly when novel microtextural and mineral chemical datasets are integrated. For example, here we demonstrate how mesoscale observations and microscale datasets can be combined to understand the petrogenesis of the perplexing snowball oiks outcrop located in the Upper Banded Series of the Stillwater Complex. Our data suggest that the orthopyroxene oikocrysts did not form in their present location, but rather formed in a dynamic magma chamber where crystals were transported either by convective currents or within crystal-rich slurries. Critical metals may be transported to the level of a nascent intrusion as dissolved components in the melt. Alternatively, ore minerals are entrained from elsewhere in a plumbing system, potentially facilitated by volatile-rich phases. There are many ore-forming processes propounded by researchers to occur at the level of emplacement; however, each must address the arrival of the ore mineral, its concentration of metals, and its accumulation into orebodies. In this contribution, several of these processes are described as well as our perspectives on the future of layered intrusion research.

Precambrian Research↗
USGS2026

Validating antler- and movement-based estimates of caribou reproduction using video camera collars

Wildlife agencies invest substantial resources in monitoring ungulate reproductive rates given ongoing concerns about population trends and their implications for management. For barren-ground caribou ( Rangifer tarandus ) in the North American Arctic, data on parturition and neonate survival have traditionally been collected using visual observations of antler retention and calf presence from small, fixed-wing aircraft. However, these surveys are weather-dependent, expensive, and dangerous, motivating the development of movement-based approaches that infer reproductive events from global positioning system (GPS) location data. We had the unique opportunity to use video camera collars to validate both antler- and movement-based methods for estimating reproduction in barren-ground caribou, using data from the Porcupine (2018–2023) and Western Arctic (2021, 2023) herds in Alaska, USA, and Yukon, Canada. For the movement-based approaches, we assessed individual-based and population-based methods, which both inferred parturition following a sharp decline in movement and inferred calf loss following a sharp increase in movement. We investigated these approaches using rarified 1-, 2-, 4-, and 8-hour fix intervals. Based on video collar observations, we found that antler retention at the onset of the calving period was highly accurate for predicting parturition (96% accuracy) but became unreliable as calving progressed, as approximately 80% of parturient females shed their antlers during the calving period. In contrast, both movement methods performed marginally for estimating caribou parturition (~70% accuracy), with estimates from the individual-based method exhibiting greater bias than those from the population-based method. The individual-based method also poorly predicted neonate survival (≤49% accuracy for detecting parturition and calf fate for the Porcupine Herd). Video data revealed that inaccuracies with the movement methods often occurred when caribou bedded during storms, rested after traversing mountainous terrain, lost a calf shortly after birth, or increased movement to evade insects. These results have important implications for management agencies using antler- and movement-based methods to estimate caribou reproduction, particularly when informing assessments of population decline or recovery. Our results demonstrate the utility of video collar data for validating reproductive monitoring approaches and provide insights into how these approaches can be improved.

Alaska, Yukon↗