USGS Science⌕ Search

SEARCH · USGS Science

Results for “Facies”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 847 records · Page 47Linked to original sources

Petrographic observations on the Exmore breccia, ICDP-USGS drilling at Eyreville, Chesapeake Bay impact structure, USA

The International Continental Scientific Drilling Program (ICDP)-U.S. Geological Survey (USGS) Eyreville A and B drill cores sampled crater fill in the region of the crater moat, ??9 km to the NE of the center of the Chesapeake Bay impact structure, Virginia, USA. They provide a 953 m section (444-1397 m depth) of sedimentary clast breccia and intercalated sedimentary and crystalline megablocks knownas Exmore beds, deposited on top of the impactite sequence between 1397 and 1551 m depth. We petrographically investigated the sandy-clayey groundmass-dominated breccia, which resembles a diamictite ("Exmore breccia"), and which, in its lower parts, carries sedimentary and crystalline blocks. The entire breccia interval is characterizedby the presence of glauconite and bioclastic carbonate, which distinguishes the Exmore breccia from other sandy facies above and below in the stratigraphy. The sediment-clast breccia exhibits strong heterogeneity from sample to sample with respect to groundmass nature, e.g., clay versus sand content, as well as clast content, in general, and shocked clast content, in particular. There is a consistently signifi cantly larger macroscopic sedimentary to crystalline clast content. On the microscopic scale, the intersample sediment to crystalline clast ratios are quite variable. A very small component of shocked material, in the form of shock-deformed quartz, and to an even lesser degree feldspar, and somewhat more abundant but still relatively scarce shardshaped,altered melt particles, is present throughout the section. However, between ??458 and 469 m, and between 514 and 527 m depths, the abundance of such melt particlesis notably enhanced. These sections are also chemically distinct and relatively more mafic than the other parts of the Exmore breccia. It appears that from the time of deposition of the 527 m material, calming of the ocean occurred over the crater area as a result of abatement of resurge activity, so that ejecta from the plume abovethe crater could accumulate within the crater area to a larger degree. Deposition ofejecta fallout from the collapsing ejecta plume was terminated by the time of deposition of the 458 m material. This raises questions about the positioning of the exact upper contact of Exmore breccia to post-Exmore sediment (Chickahominy Formation), which is currently placed at 444 m depth and which possibly should be revisedto 458 m depth. Based on a signifi cant record of granite-derived material with shocked minerals, the shocked debris component seems to be largely derived from crystalline target rocks. This provides further evidence that the basement-derived material of the basal section of the Eyreville drill cores, which is essentially unshocked, is likely of an allochthonous nature and that the drilling did not intersect the actual crater floor. 76??W. ?? 2009 Geological Society of America.

Special Paper of the Geological Society of America↗

Integrated sequence stratigraphy of the postimpact sediments from the Eyreville core holes, Chesapeake Bay impact structure inner basin

The Eyreville core holes provide the first continuously cored record of postimpact sequences from within the deepest part of the central Chesapeake Bay impact crater. We analyzed the upper Eocene to Pliocene postimpact sediments from the Eyreville A and C core holes for lithology (semiquantitative measurements of grain size and composition), sequence stratigraphy, and chronostratigraphy. Age is based primarily on Sr isotope stratigraphy supplemented by biostratigraphy (dinocysts, nannofossils, and planktonic foraminifers); age resolution is approximately ±0.5 Ma for early Miocene sequences and approximately ±1.0 Ma for younger and older sequences. Eocene–lower Miocene sequences are subtle, upper middle to lower upper Miocene sequences are more clearly distinguished, and upper Miocene–Pliocene sequences display a distinct facies pattern within sequences. We recognize two upper Eocene, two Oligocene, nine Miocene, three Pliocene, and one Pleistocene sequence and correlate them with those in New Jersey and Delaware. The upper Eocene through Pleistocene strata at Eyreville record changes from: (1) rapidly deposited, extremely fine-grained Eocene strata that probably represent two sequences deposited in a deep (>200 m) basin; to (2) highly dissected Oligocene (two very thin sequences) to lower Miocene (three thin sequences) with a long hiatus; to (3) a thick, rapidly deposited (43–73 m/Ma), very fine-grained, biosiliceous middle Miocene (16.5–14 Ma) section divided into three sequences (V5–V3) deposited in middle neritic paleoenvironments; to (4) a 4.5-Ma-long hiatus (12.8–8.3 Ma); to (5) sandy, shelly upper Miocene to Pliocene strata (8.3–2.0 Ma) divided into six sequences deposited in shelf and shoreface environments; and, last, to (6) a sandy middle Pleistocene paralic sequence (~400 ka). The Eyreville cores thus record the filling of a deep impact-generated basin where the timing of sequence boundaries is heavily influenced by eustasy.

Virginia↗

The Eocene-Oligocene sedimentary record in the Chesapeake Bay impact structure: Implications for climate and sea-level changes on the western Atlantic margin

A multidisciplinary investigation of the Eocene-Oligocene transition in the International Continental Scientific Drilling Program (ICDP)-U.S. Geological Survey (USGS) Eyreville core from the Chesapeake Bay impact basin was conducted in order to document environmental changes and sequence stratigraphic setting. Planktonic foraminifera and calcareous nannofossil biostratigraphy indicate that the Eyreville core includes an expanded upper Eocene (Biozones E15 to E16 and NP19/20 to NP21, respectively) and a condensed Oligocene-Miocene (NP24-NN1) sedimentary sequence. The Eocene-Oligocene contact corresponds to a =3-Ma-long hiatus. Eocene- Oligocene sedimentation is dominated by great diversity and varying amounts of detrital and authigenic minerals. Four sedimentary intervals are identified by lithology and mineral content: (1) A 30-m-thick, smectite- and illite-rich interval directly overlies the Exmore Formation, suggesting long-term reworking of impact debris within the Chesapeake Bay impact structure. (2) Subsequently, an increase in kaolinite content suggests erosion from soils developed during late Eocene warm and humid climate in agreement with data derived from other Atlantic sites. However, the kaolinite increase may also be explained by change to a predominant sediment input from outside the Chesapeake Bay impact structure caused by progradation of more proximal facies belts during the highstand systems tract of the late Eocene sequence E10.Spectral analysis based on gamma-ray and magnetic susceptibility logs suggests infl uence of 1.2 Ma low-amplitude oscillation of the obliquity period during the late Eocene. (3) During the latest Eocene (Biozones NP21 and E16), several lithological contacts (clay to clayey silt) occur concomitant with a prominent change in the mineralogical composition with illite as a major component: This lithological change starts close to the Biozone NP19/20-NP21 boundary and may correspond to sequence boundary E10-E11 as observed in other northwest Atlantic margin sections. It could result from a shift to more distal depositional environments and condensed sedimentation during maximum fl ooding, rather than refl ecting a climatic change in the hinterland. The distinct 1% increase of the oxygen isotopes may correspond to the short-term latest Eocene "precursor isotope event." (4) The abrupt increase of sediment grainsize, carbonate content, and abundance of authigenic minerals (glauconite) across the major unconformity that separates Eocene from Oligocene sediments in the Eyreville core refl ects deposition in shallower settings associated with erosion, winnowing, and reworking. Sediments within the central crater were affected by the rapid eustatic sea-level changes associated with the greenhouse-icehouse transition, as well as by an abrupt major uplift event and possibly enhanced current activity on the northwestern Atlantic margin. ?? 2009 The Geological Society of America.

Chesapeake Bay↗

Igneous activity, metamorphism, and deformation in the Mount Rogers area of SW Virginia and NW North Carolina: A geologic record of Precambrian tectonic evolution of the southern Blue Ridge Province

Mesoproterozoic basement in the vicinity of Mount Rogers is characterized by considerable lithologic variability, including major map units composed of gneiss, amphibolite, migmatite, meta-quartz monzodiorite and various types of granitoid. SHRIMP U-Pb geochronology and field mapping indicate that basement units define four types of occurrences, including (1) xenoliths of ca. 1.33 to ≥1.18 Ga age, (2) an early magmatic suite including meta-granitoids of ca. 1185–1140 Ma age that enclose or locally intrude the xenoliths, (3) metasedimentary rocks represented by layered granofels and biotite schist whose protoliths were likely deposited on the older meta-granitoids, and (4) a late magmatic suite composed of younger, ca. 1075–1030 Ma intrusive rocks of variable chemical composition that intruded the older rocks. The magmatic protolith of granofels constituting part of a layered, map-scale xenolith crystallized at ca. 1327 Ma, indicating that the lithology represents the oldest, intact crust presently recognized in the southern Appalachians. SHRIMP U-Pb data indicate that periods of regional Mesoproterozoic metamorphism occurred at 1170–1140 and 1070–1020 Ma. The near synchroneity in timing of regional metamorphism and magmatism suggests that magmas were emplaced into crust that was likely at near-solidus temperatures and that melts might have contributed to the regional heat budget. Much of the area is cut by numerous, generally east- to northeast-striking Paleozoic fault zones characterized by variable degrees of ductile deformation and recrystallization. These high-strain fault zones dismember the terrane, resulting in juxtaposition of units and transformation of basement lithologies to quartz- and mica-rich tectonites with protomylonitic and mylonitic textures. Mineral assemblages developed within such zones indicate that deformation and recrystallization likely occurred at greenschist-facies conditions at ca. 340 Ma.

North Carolina, Virginia↗

Laramide basin CSI: Comprehensive stratigraphic investigations of Paleogene sediments in the Colorado Headwaters Basin, north-central Colorado

The Paleogene sedimentary deposits of the Colorado Headwaters Basin provide a detailed proxy record of regional deformation and basin subsidence during the Laramide orogeny in north-central Colorado and southern Wyoming. This field trip presents extensive evidence from sedimentology, stratigraphy, structure, palynology, and isotope geochronology that shows a complex history that is markedly different from other Laramide synorogenic basins in the vicinity. We show that the basin area was deformed by faulting and folding before, during, and after deposition of the Paleogene rocks. Internal unconformities have been identified that further reflect the interaction of deformation, subsidence, and sedimentation. Uplift of Proterozoic basement blocks that make up the surrounding mountain ranges today occurred late in basin history. Evidence is given to reinterpret the Independence Mountain uplift as the result of significant normal faulting (not thrusting), probably in middle Tertiary time. While the Denver and Cheyenne Basins to the east were subsiding and accumulating sediment during Late Cretaceous time, the Colorado Headwaters Basin region was experiencing vertical uplift and erosion. At least 1200 m of the upper part of the marine Upper Cretaceous Pierre Shale was regionally removed, along with Fox Hills Sandstone shoreline deposits of the receding Interior Seaway as well as any Laramie Formation–type continental deposits. Subsidence did not begin in the Colorado Headwaters Basin until after 60.5 Ma, when coarse, chaotic, debris-flow deposits of the Paleocene Windy Gap Volcanic Member of the Middle Park Formation began to accumulate along the southern basin margin. These volcaniclastic conglomerate deposits were derived from local, mafic-alkalic volcanic sources (and transitory deposits in the drainage basin), and were rapidly transported into a deep lake system by sediment gravity currents. The southern part of the basin subsided rapidly (roughly 750–1000 m/m.y.) and the drainage system delivered increasing proportions of arkosic debris from uplifted Proterozoic basement and more intermediate-composition volcanic-porphyry materials from central Colorado sources. Other margins of the Colorado Headwaters Basin subsided at slightly different times. Subsidence was preceded by variable amounts of gentle tilting and localized block-fault uplifts. The north-central part of the basin that was least-eroded in early Paleocene time was structurally inverted and became the locus of greatest subsidence during later Paleocene-Eocene time. Middle Paleocene coal-mires formed in the topographically lowest eastern part of the basin, but the basin center migrated to the western side by Eocene time when coal was deposited in the Coalmont district. In between, persistent lakes of variable depths characterized the central basin area, as evidenced by well-preserved deltaic facies. Fault-fold deformation within the Colorado Headwaters Basin strongly affected the Paleocene fluvial-lacustrine deposits, as reflected in the steep limbs of anticline-syncline pairs within the McCallum fold belt and the steep margins of the Breccia Spoon syncline. Slivers of Proterozoic basement rock were also elevated on steep reverse faults in late Paleocene time along the Delaney Butte–Sheep Mountain–Boettcher Ridge structure. Eocene deposits, by and large, are only gently folded within the Colorado Headwaters Basin and thus reflect a change in deformation history. The Paleogene deposits of the Colorado Headwaters Basin today represent only a fragment of the original extent of the depositional basin. Basal, coarse conglomerate deposits that suggest proximity to an active basin margin are relatively rare and are limited to the southern and northwestern margins of the relict basin. The northeastern margin of the preserved Paleogene section is conspicuously fine-grained, which indicates that any contemporaneous marginal uplift was far removed from the current extent of preserved fluvial-lacustrine sediments. The conspicuous basement uplifts of Proterozoic rock that flank the current relict Paleogene basin deposits are largely post-middle Eocene in age and are not associated with any Laramide synuplift fluvial deposits. The east-west–trending Independence Mountain fault system that truncates the Colorado Headwaters Basin on the north with an uplifted Proterozoic basement block is reinterpreted in this report. Numerous prior analyses had concluded that the fault was a low-angle, south-directed Laramide thrust that overlapped the northern margin of the basin. We conclude instead that the fault is more likely a Neogene normal fault that truncates all prior structure and belongs to a family of sub-parallel west-northwest–trending normal faults that offset upper Oligocene-Miocene fluvial deposits of the Browns Park–North Park Formations.

Colorado↗

The Devonian Marcellus Shale and Millboro Shale

The recent development of unconventional oil and natural gas resources in the United States builds upon many decades of research, which included resource assessment and the development of well completion and extraction technology. The Eastern Gas Shales Project, funded by the U.S. Department of Energy in the 1980s, investigated the gas potential of organic-rich, Devonian black shales in the Appalachian, Michigan, and Illinois basins. One of these eastern shales is the Middle Devonian Marcellus Shale, which has been extensively developed for natural gas and natural gas liquids since 2007. The Marcellus is one of the basal units in a thick Devonian shale sedimentary sequence in the Appalachian basin. The Marcellus rests on the Onondaga Limestone throughout most of the basin, or on the time-equivalent Needmore Shale in the southeastern parts of the basin. Another basal unit, the Huntersville Chert, underlies the Marcellus in the southern part of the basin. The Devonian section is compressed to the south, and the Marcellus Shale, along with several overlying units, grades into the age-equivalent Millboro Shale in Virginia. The Marcellus-Millboro interval is far from a uniform slab of black rock. This field trip will examine a number of natural and engineered exposures in the vicinity of the West Virginia–Virginia state line, where participants will have the opportunity to view a variety of sedimentary facies within the shale itself, sedimentary structures, tectonic structures, fossils, overlying and underlying formations, volcaniclastic ash beds, and to view a basaltic intrusion.

GSA Field Guides↗

Sulfur and oxygen isotopic study of Paleozoic sediment-hosted Zn-Pb(-Ag-Au-Ba-F) deposits and associated hydrothermal alteration zones in the Nome Complex, Seward Peninsula, Alaska

Results of sulfur and oxygen isotope studies of sedimentary exhalative (SEDEX) Zn-Pb(-Ag-Au-Ba-F) deposits hosted in metamorphosed Paleozoic clastic and carbonate rocks of the Nome Complex, Seward Peninsula, Alaska, are consistent with data for similar deposits worldwide. Stable isotopic studies of the Nome Complex are challenging because the rocks have undergone Mesozoic blueschist- and greenschist-facies metamorphism and deformation at temperatures estimated from 390–490 °C. Studies of sulfur and oxygen isotopes in other areas suggest that, in the absence of chemical and mineralogical evidence for metasomatism, the principal effect of metamorphism is re-equilibration between individual minerals at the temperature of metamorphism, which commonly leads to a narrowing of the overall range of isotope values for a suite of rocks, but generally does not significantly modify the average whole rock value for that suite. Sulfur isotope studies of the stratabound and locally stratiform sulfide lenses at the Aurora Creek-Christophosen deposit, which is of possible Late Devonian-early Carboniferous age, show a large range of δ34Ssulfide values from -9.7 to 39.4‰, suggesting multiple sulfur sources and possibly complex processes of sulfide formation that may include bacterial sulfate reduction, thermochemical sulfate reduction, and Rayleigh distillation. Low δ34S values probably represent bacterial sulfide minerals remobilized from the host metasedimentary rocks either during the original seafloor mineralization or are related to a Cretaceous mineralizing event that produced Au-vein and base-metal replacement deposits; the latter process is supported by Pb isotope data. The Wheeler North deposit is similar to Aurora Creek-Christophosen but does not have negative δ34S values. It also probably formed in an euxinic sub-basin. The stratabound Nelson deposit, and the deformed veins at the Galena and Quarry deposits, may be older than the Aurora Creek-Christophosen and Wheeler North deposits. The Nelson deposit has a lower and narrower range of δ34S values (1.9 to 10.4‰), averaging about 8‰. The Galena and Quarry veins display δ34S values that are similar to those of the stratabound Nelson deposit. Barite samples from the Aurora Creek-Christophosen, Wheeler North, and Quarry deposits have 34S-enriched δ34S values between 25 and 30‰ that are consistent with derivation of the sulfur from coeval (Paleozoic) seawater sulfate. Given their δ34S values, it is likely that the Aurora Creek-Christophosen and Wheeler North deposits formed in closed sub-basins with euxinic conditions that led to extreme Rayleigh distillation to produce the very large range and very high δ34S values. The Nelson deposit probably formed within an anoxic but not euxinic sub-basin. At Nelson, sulfide was likely derived by a subsurface thermochemical sulfate reduction (TSR) reaction, similar to reactions that are inferred to have produced the sulfides in the Galena and Quarry deposits, which are interpreted as feeder veins for the stratabound deposits. Calculations of oxygen isotope temperatures are based on the assumption that evolved seawater with δ18O of 3‰ was the mineralizing and altering fluid related to the formation of the sulfide deposits. Temperatures of aluminous alteration and sulfide mineralization were between 109 and 209 °C, determined on the basis of oxygen isotope fractionations between the mineralizing fluid and proportionate amounts of quartz and muscovite in the rocks. These temperature estimates agree well with known temperatures of SEDEX mineralization worldwide. Sulfur isotope values also are generally consistent with the known ranges in SEDEX deposits worldwide (δ34S ≈ -5 to 25‰).

GSA Special Papers↗

Cambrian–Ordovician of the central Appalachians:Correlations and event stratigraphy of carbonate platform andadjacent deep-water deposits

This trip seeks to illustrate the succession of Cambrian and Ordovician facies deposited within the Pennsylvania and Maryland portion of the Great American Carbonate Bank. From the Early Cambrian (Dyeran) through Late Ordovician (Turinan), the Laurentian paleocontinent was rimmed by an extensive carbonate platform. During this protracted period of time, a succession of carbonate rock, more than two miles thick, was deposited in Maryland and Pennsylvania. These strata are now exposed in the Nittany arch of central Pennsylvania; the Great Valley of Pennsylvania, Maryland, and Virginia; and the Conestoga and Frederick Valleys of eastern Pennsylvania and Maryland. This fi eld trip will visit key outcrops that illustrate the varied depositional styles and environmental settings that prevailed at different times within the Pennsylvania reentrant portion of the Great American Carbonate Bank. In particular, we will contrast the timing and pattern of sedimentation in off-shelf (Frederick Valley), outer-shelf (Great Valley), and inner-shelf (Nittany arch) deposits. The deposition was controlled primarily by eustasy through the Cambrian and Early Ordovician (within the Sauk megasequence), but was strongly infl uenced later by the onset of Taconic orogenesis during deposition of the Tippecanoe megasequence.

Pennsylvania, Maryland↗

Temporal and spatial distribution of Paleozoic metamorphism in the southern Appalachian Blue Ridge and Inner Piedmont delimited by ion microprobe U-Pb ages of metamorphic zircon

Ion microprobe U-Pb zircon rim ages from 39 samples from across the accreted terranes of the central Blue Ridge, eastward across the Inner Piedmont, delimit the timing and spatial extent of superposed metamorphism in the southern Appalachian orogen. Metamorphic zircon rims are 10–40 µm wide, mostly unzoned, and dark gray to black or bright white in cathodoluminescence, and truncate and/or embay interior oscillatory zoning. Black unzoned and rounded or ovoid-shaped metamorphic zircon morphologies also occur. Th/U values range from 0.01 to 1.4, with the majority of ratios less than 0.1. Results of 206 Pb/ 238 U ages, ±2% discordant, range from 481 to 305 Ma. Clustering within these data reveals that the Blue Ridge and Inner Piedmont terranes were affected by three tectonothermal events: (1) 462–448 Ma (Taconic); (2) 395–340 Ma (Acadian and Neoacadian); and (3) 335–322 Ma, related to the early phase of the Alleghanian orogeny. By combining zircon rim ages with metamorphic isograds and other published isotopic ages, we identify the thermal architecture of the southern Appalachian orogen: juxtaposed and superposed metamorphic domains have younger ages to the east related to the marginward addition of terranes, and these domains can serve as a proxy to delimit terrane accretion. Most 462–448 Ma ages occur in the western and central Blue Ridge and define a continuous progression from greenschist to granulite facies that identifies the intact Taconic core. The extent of 462–448 Ma metamorphism indicates that the central Blue Ridge and Tugaloo terranes were accreted to the western Blue Ridge during the Taconic orogeny. Zircon rim ages in the Inner Piedmont span almost 100 m.y., with peaks at 395–385, 376–340, and 335–322 Ma, and delimit the Acadian-Neoacadian and Alleghanian metamorphic core. The timing and distribution of metamorphism in the Inner Piedmont are consistent with the Devonian to Mississippian oblique collision of the Carolina superterrane, followed by an early phase of Alleghanian metamorphism at 335–322 Ma (temperature >500 °C). The eastern Blue Ridge contains evidence of three possible tectonothermal events: ~460 Ma, 376–340 Ma, and ~335 Ma. All of the crystalline terranes of the Blue Ridge–Piedmont megathrust sheet were affected by Alleghanian metamorphism and deformation.

Book chapter↗

Downhill from Austin and Ely to Las Vegas: U-Pb detrital zircon suites from the Eocene–Oligocene Titus Canyon Formation and associated strata, Death Valley, California

In a reconnaissance investigation aimed at interrogating the changing topography and paleogeography of the western United States prior to Basin and Range faulting, a preliminary study made use of U-Pb ages of detrital zircon suites from 16 samples from the Eocene–Oligocene Titus Canyon Formation, its overlying units, and correlatives near Death Valley. The Titus Canyon Formation unconformably overlies Neoproterozoic to Devonian strata in the Funeral and Grapevine Mountains of California and Nevada. Samples were collected from (1) the type area in Titus Canyon, (2) the headwaters of Monarch Canyon, and (3) unnamed Cenozoic strata exposed in a klippe of the Boundary Canyon fault in the central Funeral Mountains. Red beds and conglomerates at the base of the Titus Canyon Formation at locations 1 and 2, which contain previously reported 38–37 Ma fossils, yielded mostly Sierran batholith–age detrital zircons (defined by Triassic, Jurassic, and Cretaceous peaks). Overlying channelized fluvial sandstones, conglomerates, and minor lacustrine shale, marl, and limestone record an abrupt change in source region around 38–36 Ma or slightly later, from more local, Sierran arc–derived sediment to extraregional sources to the north. Clasts of red radiolarian-bearing chert, dark radiolarian chert, and quartzite indicate sources in the region of the Golconda and Roberts Mountains allochthons of northern Nevada. Sandstones intercalated with conglomerate contain increasing proportions of Cenozoic zircon sourced from south-migrating, caldera-forming eruptions at the latitude of Austin and Ely in Nevada with maximum depositional ages (MDAs) ranging from 36 to 24 Ma at the top of the Titus Canyon Formation. Carbonate clasts and ash-rich horizons become more prevalent in the overlying conglomeratic Panuga Formation (which contains a previously dated 15.7 Ma ash-flow tuff). The base of the higher, ash-dominated Wahguyhe Formation yielded a MDA of 14.4 Ma. The central Funeral Mountains section exposes a different sequence of units that, based on new data, are correlative to the Titus Canyon, Panuga, and Wahguyhe Formations at locations 1 and 2. An ash-flow tuff above its (unexposed) base provided a MDA of 34 Ma, and the youngest sample yielded a MDA of 12.7 Ma. The striking differences between age-correlative sections, together with map-based evidence for channelization, indicate that the Titus Canyon Formation and overlying units likely represent fluvial channel, floodplain, and lacustrine deposits as sediments mostly bypassed the region, moving south toward the Paleogene shoreline in the Mojave Desert. The profound changes in source regions and sedimentary facies documented in the Titus Canyon Formation took place during ignimbrite flareup magmatism and a proposed eastward shift of the continental divide from the axis of the Cretaceous arc to a new divide in central Nevada in response to thermal uplift and addition of magma to the crust. This uplift initiated south-flowing fluvial systems that supplied sediments to the Titus Canyon Formation and higher units.

Arizona, California, Nevada, Utah↗

High latitude meteoric δ 18 O compositions: Paleosol siderite in the Middle Cretaceous Nanushuk Formation, North Slope, Alaska

Siderite-bearing pedogenic horizons of the Nanushuk Formation of the North Slope, Alaska, provide a critical high paleolatitude oxygen isotopic proxy record of paleoprecipitation, supplying important empirical data needed for paleoclimatic reconstructions and models of "greenhouse-world" precipitation rates. Siderite ??18O values were determined from four paleosol horizons in the National Petroleum Reserve Alaska (NPR-A) Grandstand # 1 Core, and the values range between -17.6??? and -14.3??? Peedee belemnite (PDB) with standard deviations generally less than 0.6??? within individual horizons. The ??13C values are much more variable, ranging from -4.6??? to +10.8??? PDB. A covariant ??18O versus ??13C trend in one horizon probably resulted from mixing between modified marine and meteoric phreatic fluids during siderite precipitation. Groundwater values calculated from siderite oxygen isotopic values and paleobotanical temperature estimates range from -23.0??? to -19.5??? standard mean ocean water (SMOW). Minor element analyses show that the siderites are impure, having enrichments in Ca, Mg, Mn, and Sr. Minor element substitutions and Mg/Fe and Mg/ (Ca + Mg) ratios also suggest the influence of marine fluids upon siderite precipitation. The pedogenic horizons are characterized by gleyed colors, rare root traces, abundant siderite, abundant organic matter, rare clay and silty clay coatings and infillings, some preservation of primary sedimentary stratification, and a lack of ferruginous oxides and mottles. The pedogenic features suggest that these were poorly drained, reducing, hydromorphic soils that developed in coal-bearing delta plain facies and are similar to modern Inceptisols. Model-derived estimates of precipitation rates for the Late Albian of the North Slope, Alaska (485-626 mm/yr), are consistent with precipitation rates necessary to maintain modern peat-forming environments. This information reinforces the mutual consistency between empirical paleotemperature estimates and isotope mass balance models of the hydrologic cycle and can be used in future global circulation modeling (GCM) experiments of "greenhouse-world" climates to constrain high latitude precipitation rates in simulations of ancient worlds with decreased equator-to-pole temperature gradients. ?? 2004 Geological Society of America.

Geological Society of America Bulletin↗

Timing and development of the Heise volcanic field, Snake River Plain, Idaho, western USA

The Snake River Plain (SRP) developed over the last 16 Ma as a bimodal volcanic province in response to the southwest movement of the North American plate over a fixed melting anomaly. Volcanism along the SRP is dominated by eruptions of explosive high-silica rhyolites and represents some of the largest eruptions known. Basaltic eruptions represent the final stages of volcanism, forming a thin cap above voluminous rhyolitic deposits. Volcanism progressed, generally from west to east, along the plain episodically in successive volcanic fields comprised of nested caldera complexes with major caldera-forming eruptions within a particular field separated by ca. 0.5-1 Ma, similar to, and in continuation with, the present-day Yellowstone Plateau volcanic field. Passage of the North American plate over the melting anomaly at a particular point in time and space was accompanied by uplift, regional tectonism, massive explosive eruptions, and caldera subsidence, and followed by basaltic volcanism and general subsidence. The Heise volcan ic field in the eastern SRP, Idaho, represents an adjacent and slightly older field immediately to the southwest of the Yellowstone Plateau volcanic field. Five large-volume (>0.5 km3) rhyolitic ignimbrites constitute a time-stratigraphic framework of late Miocene to early Pliocene volcanism for the study region. Field relations and high-precision 40Ar/39Ar age determinations establish that four of these regional ignimbrites were erupted from the Heise volcanic field and form the framework of the Heise Group. These are the Blacktail Creek Tuff (6.62 ?? 0.03 Ma), Walcott Tuff (6.27 ?? 0.04 Ma), Conant Creek Tuff (5.51 ?? 0.13 Ma), and Kilgore Tuff (4.45 ?? 0.05 Ma; all errors reported at ?? 2??). The fifth widespread ignimbrite in the regions is the Arbon Valley Tuff Member of the Starlight Formation (10.21 ?? 0.03 Ma), which erupted from a caldera source outside of the Heise volcanic field. These results establish the Conant Creek Tuff as a distinct and widespread ignimbrite in the Heise volcanic field, eliminating former confusion resulting from previous discordant K/Ar and fission-track dates. New 40Ar/39Ar determinations, when combined wi th geochemical, lithologic geophysical, and field data, define the volcanic and tectonic history of the Heise volcanic field and surrounding areas. Volcanic units erupted from the Heise volcanic field also provide temporal control for tectonic events associated with late Cenozoic extension in the Snake Range and with uplift of the Teton Range, Wyoming. In the Snake Range, movement of large (???0.10 km3) slide blocks of Mississippian limestone exposed 50 km to the east of the Heise field occurred between 6.3 and 5.5 Ma and may have been catastrophically triggered by the caldera eruption of the 5.51 ?? 0.13-Ma Conant Creek Tuff. This slide block movement of ???300 vertical meters indicates that the Snake Range had significant relief by at least 5.5 Ma. In Jackson Hole, the distribution of outflow facies of the 4.45 ?? 0.05-Ma Kilgore caldera in the Heise volcanic field on the eastern SRP indicates that the northern Teton Range was not a significant topographic feature at this time. ?? 2005 Geological Society of America.

Geological Society of America Bulletin↗

Stratigraphic and geochemical evolution of an oceanic arc upper crustal section: The Jurassic Talkeetna Volcanic Formation, south-central Alaska

The Early Jurassic Talkeetna Volcanic Formation forms the upper stratigraphic level of an oceanic volcanic arc complex within the Peninsular Terrane of south-central Alaska. The section comprises a series of lavas, tuffs, and volcaniclastic debris-How and flow turbidite deposits, showing significant lateral facies variability. There is a general trend toward more volcaniclastic sediment at the top of the section and more lavas and tuff breccias toward the base. Evidence for dominant submarine, mostly mid-bathyal or deeper (>500 m) emplacement is seen throughout the section, which totals ???7 km in thickness, similar to modern western Pacific arcs, and far more than any other known exposed section. Subaerial sedimentation was rare but occurred over short intervals in the middle of the section. The Talkeetna Volcanic Formation is dominantly calc-alkatine and shows no clear trend to increasing SiO2 up-section. An oceanic subduction petrogenesis is shown by trace element and Nd isotope data. Rocks at the base of the section show no relative enrichment of light rare earth elements (LREEs) versus heavy rare earth elements (REES) or in melt-incompatible versus compatible high field strength elements (HFSEs). Relative enrichment of LREEs and HFSEs increases slightly up-section. The Talkeetna Volcanic Formation is typically more REE depleted than average continental crust, although small volumes of light REE-enriched and heavy REE-depleted mafic lavas are recognized low in the stratigraphy. The Talkeetna Volcanic Formation was formed in an intraoceanic arc above a north-dipping subduction zone and contains no preserved record of its subsequent collisions with Wrangellia or North America. ?? 2005 Geological Society of America.

Geological Society of America Bulletin↗

Deciphering igneous and metamorphic events in high-grade rocks of the Wilmington complex, Delaware: Morphology, cathodoluminescence and backscattered electron zoning, and SHRIMP U-Pb geochronology of zircon and monazite

High-grade rocks of the Wilmington Complex, northern Delaware and adjacent Maryland and Pennsylvania, contain morphologically complex zircons that formed through both igneous and metamorphic processes during the development of an island-arc complex and suturing of the arc to Laurentia. The arc complex has been divided into several members, the protoliths of which include both intrusive and extrusive rocks. Metasedimentary rocks are interlayered with the complex and are believed to be the infrastructure upon which the arc was built. In the Wilmingto n Complex rocks, both igneous and metamorphic zircons occur as elongate and equant forms. Chemical zoning, shown by cathodoluminescence (CL), includes both concentric, oscillatory patterns, indicative of igneous origin, and patchwork and sector patterns, suggestive of metamorphic growth. Metamorphic monazites are chemically homogeneous, or show oscillatory or spotted chemical zoning in backscattered electron images. U-Pb geochronology by sensitive high resolution ion microprobe (SHRIMP) was used to date complexly zoned zircon and monazite. All but one member of the Wilmington Complex crystallized in the Ordovician between ca. 475 and 485 Ma; these rocks were intruded by a suite of gabbro-to-granite plutonic rocks at 434 ?? Ma. Detrital zircons in metavolcanic and metasedimentary units were derived predominantly from 0.9 to 1.4 Ga (Grenvillian) basement, presumably of Laurentian origin. Amphibolite to granulite facies metamorphism of the Wilmington Complex, recorded by ages of metamorphic zircon (428 ?? 4 and 432 ?? 6 Ma) and monazite (429 ?? 2 and 426 ?? 3 Ma), occurred contemporaneously with emplacement of the younger plutonic rocks. On the basis of varying CL zoning patterns and external morphologies, metamorphic zircons formed by different processes (presumably controlled by rock chemistry) at slightly different times and temperatures during prograde metamorphism. In addition, at least three other thermal episodes are recorded by monazite growth at 447 ?? 4, 411 ?? 3, and 398 ?? 3 Ma. ?? 2006 Geological Society of America.

Geological Society of America Bulletin↗

Geology and complex collapse mechanisms of the 3.72 Ma Hannegan caldera, North Cascades, Washington, USA

Contiguous ring faults of the 8 × 3.5 km Hannegan caldera enclose the Hannegan volcanics in the Cascade arc of northern Washington. The caldera collapsed in two phases, which each erupted rhyolitic ignimbrite (72.3%–75.2% SiO 2 ). The first collapse phase, probably trap-door style, erupted the ≥900-m-thick ignimbrite of Hannegan Peak at 3.722 ± 0.020 Ma. This single cooling unit, generally welded, has an uppermost facies of nonwelded ignimbrite and fine ash. A short period of localized sedimentation followed. Eruption of the ignimbrite of Ruth Mountain then led to a second trap-door collapse as the first-phase partial ring fault propagated to the south to completely enclose the caldera. Wall-rock breccias are intercalated as lenses and megabreccia blocks in both ignimbrites. The minimum intracaldera volume is 55–60 km 3 . No base is exposed, nor are outflow sheets preserved. Caldera collapse and glacial erosion have removed precaldera volcanic rocks, which survive only as intracaldera breccias. Rhyolite dikes and pods, one of which yielded a 40 Ar/ 39 Ar age of 3.72 ± 0.34 Ma, intrude the ring fault and caldera fill. Daciteandesite domes, dikes, and lava flows were emplaced subsequently; one lava flow gives a 40 Ar/ 39 Ar age of 2.96 ± 0.20 Ma. The quartz diorite of Icy Peak and the granite of Nooksack Cirque (plutons with 206 Pb/ 238 U zircon ages of 3.42 ± 0.10 Ma and 3.36 ± 0.20 Ma, respectively) intrude caldera fill and basement rocks on the southwest margin of the caldera. Both plutons are now exceptionally well exposed on high, glacially sculpted peaks within the caldera, indicating erosion of at least 1 km of intracaldera fill. Hannegan caldera anchors the northeast end of a linear NE-SW age-progressive migration of magmatic focus from the Chilliwack batholith to the active Mount Baker volcano.

Washington↗

Volcanic arc emplacement onto the southernmost Appalachian Laurentian shelf: Characteristics and constraints

In the southernmost Appalachians, the Hillabee Greenstone, an Ordovician volcanic arc fragment, lies directly atop the outermost Laurentian Devonian–earliest Mississippian(?) shelf sequence at the structural top of the greenschist facies Talladega belt, the frontal metamorphic allochthon along this orogenic segment. The Hillabee Greenstone was emplaced between latest Devonian and middle Mississippian time. It and the uppermost Laurentian section were later repeated together within a series of map-scale imbricate slices of a postmetamorphic, dextral, transpressional, Alleghanian thrust duplex system that placed the high-grade eastern Blue Ridge allochthon atop the Talladega belt. Geochemical and geochronologic (U-Pb zircon) studies indicate that the Hillabee Greenstone's interstratified tholeiitic meta-basalt and calc-alkaline metadacite/rhyolite formed within an extensional setting on continental crust ca. 460–470 Ma. Palinspastic reconstructions of the southern Appalachian Ordovician margin place the Hillabee Greenstone outboard of the present position of the Pine Mountain terrane and suggest links to Ordovician plutonism in the overlying eastern Blue Ridge, and possibly to widespread K-bentonite deposits within Ordovician platform units. The tectonic evolution of the Hillabee Greenstone exhibits many unusual and intriguing features, including: (1) premeta-morphic emplacement along a basal cryptic thrust, which is remarkably concordant to both hanging wall and footwall sequences across its entire extent (>230 km), (2) formation, transport, and emplacement of the arc fragment accompanied by minimal deformation of the Hillabee Greenstone and underlying outer-margin shelf rocks, (3) emplacement temporally coincident with the adjacent collision of the younger, tectonically independent Ouachita volcanic arc with southeastern Laurentia. These features highlight strong contrasts in the Ordovician-Taconian evolution of the southern and northern parts of the Appalachian orogen.

Geological Society of America Bulletin↗

High-resolution sequence stratigraphy of lower Paleozoic sheet sandstones in central North America: The role of special conditions of cratonic interiors in development of stratal architecture

Well-known difficulties in applying sequence stratigraphic concepts to deposits that accumulated across slowly subsiding cratonic interior regions have limited our ability to interpret the history of continental-scale tectonism, oceanographic dynamics of epeiric seas, and eustasy. We used a multi-disciplinary approach to construct a high-resolution stratigraphic framework for lower Paleozoic strata in the cratonic interior of North America. Within this framework, these strata proved readily amenable to modern sequence stratigraphic techniques that were formulated based on successions along passive margins and in foreland basins, settings markedly different from the cratonic interior. Parasequences, parasequence stacking patterns, systems tracts, maximum flooding intervals, and sequence-bounding unconformities can be confidently recognized in the cratonic interior using mostly standard criteria for identification. The similarity of cratonic interior and foreland basin successions in size, geometry, constituent facies, and local stacking patterns of nearshore parasequences is especially striking. This similarity indicates that the fundamental processes that establish shoreface morphology and determine the stratal expression of retreat and progradation were likewise generally the same, despite marked differences in tectonism, physiography, and bathymetry between the two settings. Our results do not support the widespread perception that Paleozoic cratonic interior successions are so anomalous in stratal geometries, and constitute such a poor record of time, that they are poorly suited for modern sequence stratigraphic analyses. The particular arrangement of stratal elements in the cratonic interior succession we studied is no more anomalous or enigmatic than the variability in architecture that sets all sedimentary successions apart from one another. Thus, Paleozoic strata of the cratonic interior are most appropriately considered as a package that belongs in a continuum of variable stratigraphic packages reflecting variable controls such as subsidence and shelf physiography. Special conditions of exceptionally slow subsidence rate, shallow bathymetry, and nearly flat regional shelf gradient are manifest mostly by the presence of individual systems tracts of relatively long duration that extend for much greater distances across depositional strike than those that characterize successions deposited in more dynamic tectonic and physiographic settings. These results suggest that if other cratonic interior successions are as anomalous as reported, a low sediment supply may have played a primary role in development of their apparently condensed stratal architecture. The results also lead us to suggest that a nonvegetated lower Paleozoic landscape played a relatively insignificant role in the development of what are commonly perceived to be enigmatic stratigraphic features of sheet sandstones, particularly their widespread yet thin geometry, and a scarcity of shale and siltstone. ?? 2007 Geological Society of America.

Geological Society of America Bulletin↗

Origin and paleoclimatic significance of late Quaternary loess in Nebraska: Evidence from stratigraphy, chronology, sedimentology, and geochemistry

Loess is one of the most extensive surficial geologic deposits in midcontinental North America, particularly in the central Great Plains region of Nebraska. Last-glacial-age loess (Peoria Loess) reaches its greatest known thickness in the world in this area. New stratigraphic, geochronologic, mineralogic, and geochemical data yield information about the age and provenance of Peoria Loess, as well as evaluation of recent climate models. Sixteen new radiocarbon ages and recently acquired optically stimulated luminescence ages indicate that Peoria Loess deposition in Nebraska occurred between ca. 25,000 cal yr B.P. and ca. 13,000 cal yr B.P. After ca. 13,000 cal yr B.P. a period of pedogenesis began, represented by the dark, prominent Brady Soil. At some localities, further loess deposition was minimal. At other localities, sometime after ca. 11,000 cal yr B.P., there were additional episodes of loess deposition (Bignell Loess) intermittently throughout the Holocene. The spatial variability of particle size abundances in Peoria Loess shows a northwest-to-southeast fining in Nebraska, consistent with maps of previous workers that show a northwest-to-southeast thinning of loess. These observations indicate that paleowinds that deposited the loess were from the west or northwest and that the source or sources of Peoria Loess lay to the west or northwest. New mineralogical and geochemical data indicate that the most important sources of loess were likely Tertiary siltstones of the White River and Arikaree Groups, silt facies of Pliocene eolian sediments, and small contributions from Pierre Shale. It is likely that fine-grained silts were transported episodically through the Nebraska Sand Hills from Tertiary and Cretaceous bedrock sources to the north, in agreement with a model presented recently. The identification of Tertiary siltstones and silts as the primary sources of loess is consistent with isotopic data presented in a companion paper. Contributions of glaciogenic silt from the Platte and Missouri Rivers were limited to loess zones close to the valleys of those drainages. An earlier computer-based model of global dust generation during the last glacial period did not identify the Great Plains of North America as a significant source of nonglaciogenic eolian silt. However, a refined version of this model does simulate this region as a significant non-glacial dust source during the last glacial period, in good agreement with the results presented here.

Nebraska↗