SEARCH · USGS Science

Results for “Stages”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 829 records · Page 46Linked to original sources

USGS1993

Physical properties, mineralogy, and geochemistry of Holocene varved sediments from Elk Lake, Minnesota

Elk Lake in northwestern Minnesota is situated close to a climatically sensitive ecotone, the forest-prairie border, that migrated back and forth over the drainage basin of the lake during the Holocene. The entire postglacial (Holocene) sediment record in the deepest part of Elk Lake is composed of annual layers (varves) that record the seasonal pulses of many sediment components, and, most important, provide high-resolution (seasonal) time calibration of rates and timing of environmental change. These varved sediments contain many allochthonous and autochthonous components that are sensitive to changing environmental conditions in the drainage basin and the lake. The mineral components of Elk Lake sediments consist mainly of authigenic calcium, magnesium, and manganese carbonate minerals (low-Mg calcite, high-Mg calcite, dolomite, and rhodochrosite), opaline silica (from diatoms), X-ray amorphous iron and manganese oxyhydroxides, and an iron phosphate mineral tentatively identified as rock-bridgeite [(Fe, Mn)Fe 4 (PO 4 ) 3 (OH) 5 ], plus minor contributions from fine-grained detrital quartz, feldspar, illite, and kaolinite. The most notable characteristic of the sediments in Elk Lake is that most of the components were formed in the lake. Q-mode factor analysis of sediment geochemistry reduced 23 observed compositional variables, expressed as percent or parts per million of elements, to three composite variables (factor loadings) whose “concentrations” are expressed on a scale of −1.0 to 1.0. Factor 1 expresses the composition of the inorganic clastic fraction based on concentrations of Mg, Na, Al, Cr, V, Y, Sc, Ni, Sr, Co, and Cu. Factor 2 expresses the similarities in variations of Fe, Mn, P, organic carbon, and Mo. Factor 3 loadings are a synthesis of concentrations of Mn, S, Ca, La, and Ba. Geochemical characteristics define three distinct chemical stages in the development of Elk lake: (1) a carbonate-, manganese-, iron-, sulfur-rich early-lake stage that lasted from 10,400 to 8200 varve yr; (2) a clastic- and diatom-rich mid-Holocene prairie-lake stage that lasted from 8200 to 4000 varve yr; and (3) a final iron-, manganese-, phosphate-, and organic-rich modern-lake stage that developed over the past 4000 yr. The chemical characteristics of the sediments deposited during these three lake phases can be represented by the average compositions of three groups of samples: (1) the average composition of sediments deposited over the past 2000 yr, representing the modern-lake stage; (2) the composition of a 50 varve sample centered on 5700 varve yr that represents the maximum clastic influx into the lake during the prairie period; and (3) the average composition of sediments deposited over the initial 2000 yr of the lake’s existence (10,400 to 8400 varve yr). The amplitudes of climatic oscillations, as reflected by changes in concentration of many climatically sensitive elements, were greatest during the prairie period, pronounced cycles having periodicities of several hundred years. The extremes of these oscillations occurred within several centuries or less, which suggests that significant changes in climate may occur abruptly and rapidly. Most notably, the end of the mid-Holocene prairie period, marked by a sudden decrease in the influx of detrital clastic material, occurred within a few decades.

Minnesota↗

USGS2018

Doublethink and scale mismatch polarize policies for an invasive tree

Mismatches between invasive species management policies and ecological knowledge can lead to profound societal consequences. For this reason, natural resource agencies have adopted the scientifically-based density-impact invasive species curve to guide invasive species management. We use the density-impact model to evaluate how well management policies for a native invader ( Juniperus virginiana ) match scientific guidelines. Juniperus virginiana invasion is causing a sub-continental regime shift from grasslands to woodlands in central North America, and its impacts span collapses in endemic diversity, heightened wildfire risk, and crashes in grazing land profitability. We (1) use land cover data to identify the stage of Juniperus virginiana invasion for three ecoregions within Nebraska, USA, (2) determine the range of invasion stages at individual land parcel extents within each ecoregion based on the density-impact model, and (3) determine policy alignment and mismatches relative to the density-impact model in order to assess their potential to meet sustainability targets and avoid societal impacts as Juniperus virginiana abundance increases. We found that nearly all policies evidenced doublethink and policy-ecology mismatches, for instance, promoting spread of Juniperus virginiana regardless of invasion stage while simultaneously managing it as a native invader in the same ecoregion. Like other invasive species, theory and literature for this native invader indicate that the consequences of invasion are unlikely to be prevented if policies fail to prioritize management at incipient invasion stages. Theory suggests a more realistic approach would be to align policy with the stage of invasion at local and ecoregion management scales. There is a need for scientists, policy makers, and ecosystem managers to move past ideologies governing native versus non-native invader classification and toward a framework that accounts for the uniqueness of native species invasions, their anthropogenic drivers, and their impacts on ecosystem services.

Nebraska↗

USGS2005

Leaf optical property changes associated with the occurrence of Spartina alterniflora dieback in Coastal Louisiana related to remote sensing mapping

In order to provide a remote sensing solution that would detect both the initial onset and monitor the early, as well as, the later stages of impact progression, changes in live leaf optical properties were compared along transects spanning impacted coastal Louisiana marsh sites. Green and red edge reflectance trends generally represented the early stages and fairly well the later stages of dieback progression, while blue and red reflectance and absorption trends represented the later stages of marsh impact that were most closely related to visible signs of marsh impact. Leaf reflectance in the near infrared (NIR) was not compatible with visual reflectance trends and did not co-vary with derived indicators of leaf water content, and thereby, water stress. Predicted from reflectance ratios, carotene tended to remain constant or increase relative to chlorophyll following noted changes in stressed plants at the two least impacted sites, while the pigments co-varied at the two most impacted sites. As an operational solution most amenable for satellite remote sensing, the NIR /red ratio followed blue and red reflectance trends while the NIR /green ratio mimicked the green and red edge reflectance trends indicating impact onset and progression, as well as, generally portraying blue and red reflectance trends indicating later stages of impact. The NIR/ green ratio magnitude and range generally increased from the most to least impacted site providing a convenient method to detect dieback onset and monitor dieback progression. This research demonstrated that remote sensing mapping at these sites could offer a more accurate perception of dieback severity distribution than offered by determinations relying on visible indicators of marsh changes.

Louisiana↗

USGS2010

Pleistocene carbonate stratigraphy of South Florida: Evidence for high-frequency sea-level cyclicity

Pleistocene carbonates of south Florida and islands of the Florida Keys are currently divided into five marine sequences designated, from oldest to youngest, the Q1–Q5 units. The units include a mosaic of freshwater and shallow marine deposits that accumulated on the Florida platform during high sea-level stands. The units are separated by regional-scale subaerial-exposure surfaces that formed during glacioeustatic lowstands. Analyses of cores recovered at Grossman Ridge Rock Reef and Joe Ree Rock Reef in the Florida Everglades reveal additional subaerial-exposure surfaces that are used to delineate subdivisions within units Q1 (Q1a–Q1b), Q2 (Q2a–Q2d), and Q4 (Q4a–Q4b). Units Q1–Q5 preserve evidence of at least 10 separate sea-level highstands, rather than 5 as indicated by previous studies. Compilation of available uranium-series dates on corals recovered from the Florida Keys indicates that the Q4 unit accreted during sea-level maxima associated with marine oxygen-isotope Stage 9 (Q4a) and isotope Stage 7 (Q4b). The Q5 unit formed during isotope Stage 5. No reliable dates are available for units Q1–Q3. We infer that unit Q3 was formed during the extended sea-level highstand of isotope Stage 11 and that units Q2 and Q1 predate isotope Stage 11.

Florida↗

USGS1969

Experimental studies of pegmatite genesis: I. A model for the derivation and crystallization of granitic pegmatites

The genesis of granitic igneous pegmatites is here considered in terms of a model conceived from results of field and laboratory studies and subsequently tested by means of experimental investigations. This model emphasizes the roles of water (and/or other relatively volatile substances), both as a dissolved constituent in granitic magmas and as the dominant constituent of a separate fluid phase that is in the supercritical state under most conditions of pegmatite formation. Pegmatite magma, as distinguished by a content of dissolved water that is high relative to the limit of solubility under existing confining pressure, can be formed either through partial melting of crustal materials or as rest-liquid in a cooling igneous body yielding dominantly anhydrous crystalline phases. Such granitic magma can be expected to consolidate according to the following three-fold sequence: 1. Crystallization from hydrous silicate melt, yielding anhydrous solid phases with or without OH-bearing phases. The product is characterized by normal phaneritic textures that generafly are coarse grained. It has been termed pegmatite in some occurrences, and granite in others. 2. Crystallization concomitantly from silicate melt and from a coexisting exsolved aqueous fluid of considerably lower viscosity, yielding giant-textured pegmatite along with much finer-grained, even aplitic, mineral aggregates. Segregation of these products can vary enormously in scale and degree. Partitioning of constituents between melt and aqueous fluid, rapid diffusion of constituents through the aqueous phase, and gravitational rising of this fluid through the system contribute to formation of pods, zones, and other rock units of unusual composition and texture. 3. Crystallization in the absence of silicate melt, yielding a wide variety of late-stage products. These include so-called "pocket minerals" and numerous mineral aggregates formed through exchanges of material among aqueous fluid and earlier-formed crystal-line phases. Development of pegmatite bodies can begin with either Step 1 or Step 2, but it is suggested that the processes involved in Step 2 are essential to the formation of all true pegmatites of igneous origin. The appearance of a second fluid phase, in general a supercritical aqueous fluid derived from the crystallizing melt, is regarded as the decisive event; it is promptly followed by fundamental changes in distribution and texture of the solid phases being formed. The processes can operate effectively in a fully closed system, and they also can modify the surrounding rocks if the system is open at any stage. Step 1 can include reactions between magma and earlier-formed crystals, but far more rapid and extensive exchanges of materials are subsequently effected by processes included in Steps 2 and 3; indeed, such exchanges also can account satisfactorily for pegmatites of metamorphic origin. Crystallization of most granitic magmas in the absence of a separate aqueous phase probably would begin within the temperature range 1,300°-650 ° C, the specific liquidus temperature depending mainly upon the amounts of volatile constituents held in solution at the time. This compositional factor also would be important in controlling the stage of crystallization-late, intermediate, or early-at which a separate aqueous fluid would make its appearance. Depending upon confining pressure as dictated by geologic conditions for a given system, the stage in crystallization represented by the presence of both silicate melt and aqueous fluid could begin within about the same temperature range of 1.300°-650 ° C. Exhaustion of the melt could occur within range extending downward to temperatures of 600C or even somewhat lower. Textural and structural features appear to be the most reliable indicators of the stages and fundamental processes involved in crystallization of both natural and synthetic pegmatites. The contrasting processes of crystallization from one fluid and from more than one fluid can operate over such broad P-T-X ranges that simple genetic pegmatite classifications based largely upon "key minerals," presumed temperature or pressure intervals, or the presence or absence of supercritical conditions appear to be somewhat unrealistic. © 1969 Society of Economic Geologists, Inc.

Economic Geology↗

USGS1975

Fluid inclusion studies of vein, pipe, and replacement deposits, northwestern San Juan Mountains, Colorado

Base and precious metal ores valued in excess of $300 million have been mined from vein, pipe, and replacement deposits located on the northwest side of, and structurally related to, the middle Tertiary Silverton caldera. A belt of normal faults radial to the caldera contains veins which have been mined for as much as 15,000 feet (4,600 m) along strike and 3,700 feet (1,100 m) downdip. Structural relations, metal distributions, and fluid inclusion data suggest that many of the veins were open at the same general time and received the same mineralization. Fluid inclusions in quartz and sphalerite of the main ore stage of the Argentine and adjoining veins have filling temperatures ranging from 315 degrees to 249 degrees C and salinities from 7.9 to 0.1 wt percent NaCl equivalent. However, the majority of inclusions from base metal and gold stages are in a relatively narrow range near 280 degrees to 290 degrees C and salinities are unusually low (less than 2 wt %). Filling temperatures in postsulfide quartz and fluorite are as low as 153 degrees C and salinities are generally less than 0.5 wt percent. A pressure correction of about +25 degrees C should be added to the filling temperatures. Ore fluids were physically homogeneous liquids over the 3,700-foot (1,100 m) vertical and 11,200-foot (3,400 m) lateral range studied and no systematic variations in filling temperatures or salinity in this space are noted, but significant fluctuations are evident locally. Recently developed base metal replacement deposits occur in the Eocene Telluride Conglomerate adjacent to many metal-bearing veins. Calc-silicate alteration of the conglomerate host was probably by moderately saline fluids that ranged in temperature from 320 degrees to about 400 degrees C. Quartz-bearing clasts in altered zones contain secondary halitebearing inclusions with filling temperatures of about 250 degrees C and salinities about 34 wt percent; such inclusions are not known from the base metal stage and are interpreted to have been preore. Hydrothermal quartz, sphalerite, and calcite from replacement pods contain inclusions with filling temperatures ranging from 204 degrees to 309 degrees C and salinities from 11.2 to 0.2 wt percent. That the replacement zones and throughgoing veins are genetically related is suggested by the similarity of filling temperatures and compositions of base metal-stage fluid inclusions and by structural evidence. Small high-grade pipe deposits of base and precious metals occur along the ring-fault zone of the Silverton caldera. Filling temperatures for inclusions in quartz, sphalerite, and barite of the main ore stage of these deposits range from 216 degrees to 308 degrees C and salinities range from 1.6 to 0.2 wt percent NaCl. Quartz in altered wall rocks and silicified capping contains moderately saline secondary inclusions with relatively uniform liquid: vapor ratios that suggest filling temperatures of about 225 degrees to 300 degrees C. From the available samples there is no fluid inclusion evidence for boiling. Throttling, which had been hypothesized to explain the telescoped nature of the pipe ores, is neither substantiated nor discredited by the inclusion data.

Colorado↗

USGS2021

Formation of miarolitic-class, segregation-type pegmatites in the Taishanmiao batholith, China: The role of pressure fluctuations and volatile exsolution during pegmatite formation in a closed, isochoric system

The Taishanmiao granitic batholith, located in the Eastern Qinling Orogen in Henan Province, China, contains numerous small (mostly tens of centimeters in maximum dimension) bodies exhibiting textures and mineralogy characteristics of simple quartz and alkali feldspar pegmatites. Analysis of melt inclusions (MI) and fluid inclusions (FI) in pegmatitic quartz, combined with Rhyolite-MELTS modeling of the crystallization of the granite, have been applied to develop a conceptual model of the physical and geochemical processes associated with the formation of the pegmatites. These results allow us to consider the formation of the Taishanmiao pegmatites within the context of varios models that have been proposed for pegmatite formation. Field observations and geochemical data indicate that the pegmatites represent the latest stage in the crystallization of the Taishanmiao granite and occupy ≤4 vol% of the syenogranite phase of the batholith. Results of Rhyolite-MELTS modeling suggest that the pegmatite-forming melts can be produced through continuous fractional crystallization of the Taishanmiao granitic magma, consistent with the designation of the pegmatites as a miarolitic class, segregation-type pegmatites rather than the more common intrusive-type of pegmatite. The mineral assemblage predicted by Rhyolite-MELTS after ~96% of the original granite-forming melt had crystallized consists of ~51 vol% alkali feldspar, 34 vol% quartz, 14 vol% plagioclase, 0.1 vol% biotite, and 1 vol% magnetite, similar to the alkali feldspar + quartz dominated mineralogy of the pegmatites. Moreover, the modeled residual melt composition following crystallization of ~96% of the original melt is similar to the composition of homogenized MI in quartz within the pegmatite. Rhyolite-MELTS predicts that the granite-forming melt remained volatile-undersaturated during crystallization of the batholith and contained ~6.3 wt% H 2 O and ~500 ppm CO 2 after ~96% crystallization when the pegmatites began to develop. The Rhyolite-MELTS prediction that the melt was volatile-undersaturated at the time the pegmatites began to form, but became volatile-saturated during the early stages of pegmatite formation, is consistent with the presence of some inclusion assemblages consisting of only MI, while others contain co-existing MI and FI. The relationship between halogen (F and Cl) and Na abundances in MI is also consistent with the interpretation that the very earliest stages of pegmatite formation occurred in the presence of a volatile-undersaturated melt and that the melt became volatile saturated as crystallization progressed. We propose a closed system, isochoric model for the formation of the pegmatites. Accordingly, the Taishanmiao granite crystallized isobarically at ~3.3 kbar, and the pegmatites began to form at ~734 °C and ~ 3.3 kbar, after ~96% of the original granitic melt had crystallized. During the final stages of crystallization of the granite, small pockets of the remaining residual melt became isolated within the enclosing granite and evolved as constant mass (closed), constant volume (isochoric) systems, similar to the manner in which volatile-rich melt inclusions in igneous phenocrysts evolve during post-entrapment crystallization under isochoric conditions. As a result of the negative volume change associated with crystallization, pressure in the pegmatite initially decreases as crystals form, and this leads to volatile exsolution from the melt phase. The changing PTX conditions produce a pressure-induced “liquidus deficit” that is analogous to liquidus undercooling and results in crystal growth as required to return the system to equilibrium PTX conditions. Owing to the complex closed system, isochoric PVTX evolution of the melt-crystal-volatile system, the pressure does not decrease rapidly or monotonically during pegmatite formation but, rather, gradually fluctuates such that at some stages in the evolution of the pegmatite the pressure is decreasing while at other times the pressure increases as the system cools to maintain mass and volume balance. This behavior, in turn, leads to alternating episodes of precipitation and dissolution that serve to coarsen (ripen) the crystals to produce the pegmatitic texture. The evolution of the pegmatitic melt described here is analogous to that which has been well-documented to occur in volatile-rich MI that undergo closed system, isochoric, post-entrapment crystallization.

American Mineralogist↗

USGS2010

Use of the Beaufort Sea by king eiders breeding on the North Slope of Alaska

We estimated areas used by king eiders (Somateria spectabilis) in the Alaskan Beaufort Sea, how distributions of used areas varied, and characteristics that explained variation in the number of days spent at sea, to provide regulatory agencies with baseline data needed to minimize impacts of potential offshore oil development. We implanted sixty king eiders with satellite transmitters at nesting areas on the North Slope of Alaska, USA, in 2002-2004. More than 80% of marked eiders spent >2 weeks staging offshore prior to beginning a postbreeding molt migration. During postbreeding staging and migration, male king eiders had much broader distributions in the Alaskan Beaufort Sea than female eiders, which were concentrated in Harrison and Smith Bays. Distribution did not vary by sex during spring migration in the year after marking. Shorter residence times of eiders and deeper water at locations used during spring migration suggest the Alaskan Beaufort Sea might not be as critical a staging area for king eiders during prebreeding as it is postbreeding. Residence time in the Beaufort Sea varied by sex, with female king eiders spending more days at sea than males in spring and during postbreeding. We conclude the Alaskan Beaufort Sea is an important staging area for king eiders during postbreeding, and eider distribution should be considered by managers when mitigating for future offshore development. We recommend future studies examine the importance of spring staging areas outside the Alaskan Beaufort Sea.

Journal of Wildlife Management↗

USGS1981

Population dynamics and bioenergetics of a fossorial herbivore, Thomomys talpoides (Rodentia: Geomyidae), in a spruce-fir sere

Studies of the bioenergetics of the northern pocket gopher, Thomomys talpoides , are coupled with data on demography, activity budgets, and microclimates to model the energy requirements of individuals and populations in the Wasatch Mountains of Utah during 1976-1979. Metabolic rates during rest increased linearly with decreasing ambient temperature, but burrowing metabolic rates (16.3 mL O 2 • h -1 • g -9.75 ) were independent of both temperature and physical properties of the soil. Radio-telemetry studies indicated that free-ranging gophers are active =50% of each day. Conservative estimates of true energy consumption were calculated using estimates of habitat-specific minimum daily burrowing requirements. Rates of burrowing measured in the laboratory were either ∞ 0.0 or ∞ 2.0 cm/min. The low burrowing rate was observed when the soil was frozen or saturated with water, as would occur in the field in early winter and in spring, respectively. Gophers burrowed through soil at the study site at an average rate of ∞ 1.5 cm/min. Belowground food energy densities at gopher foraging depth declined from 24.6 to 3.2 J/cm 3 along a successional gradient (subalpine forb meadow to Engelmann spruce dominated forest). We conclude that individual gophers are food limited within the climax spruce seral stage. Further, daily energy costs associated with reproduction in females may exceed the belowground energy supply available in intermediate seral stages (aspen and subalpine fir). Reduction of burrowing rates for any reason will affect gophers in the late seral stages proportionately more than those resident in the meadow. The peak gopher densities recorded (from 62 individuals/ha in the meadow to 2 individuals/ha in spruce forest) support these inferences. Detailed demographic information was obtained only in the meadow seral stage. Adult survivorship was lower in winter than in summer and varied greatly between years (0.18-0.70 yr -1 ). Juvenile survivorship from weaning through the first year was comparable to adult annual rates. The fertility rate was 3.75 young • female -1 • yr -1 . The energy supply and demand analyses indicate that the growth of Thomomys talpoides populations in the early seral stages is seldom directly limited by the amount of food present. From our demographic, environmental, and autecological studies we conclude that stochastic events associated with weather affect energy acquisition (burrowing) rates, and thus survivorship. In montane environments, such events may prevent populations from attaining sizes at which territorial behavior would hypothetically limit further increases. The energy flow through the meadow population at moderate to high )1976-1977) densities (at least 1100 MJ • ha -1 • yr -1 ) indicates that pocket gophers are proficient energy movers relative to non-fossorial small mammals. Subalpine T. talpoides populations appear commonly to attain such densities. More than 30% of the annual primary productivity allocated to belowground parts of meadow forbs may be consumed by gophers.

Ecological Monographs↗

USGS1996

Geographic variation in migratory behavior of greater white-fronted geese ( Anser albifrons )

We studied the migration and winter distribution of adult Greater White-fronted Geese ( Anser albifrons frontalis ) radio-marked on the Yukon-Kuskokwim Delta (YKD) and Bristol Bay Lowlands (BBL) of Alaska from 1987 to 1992. The major autumn staging site for geese from both breeding areas was the Klamath Basin on the California/Oregon border. However, temporal use of this area differed markedly between populations. Geese from the BBL arrived at the Klamath Basin nearly 30 days before geese from the YKD and departed before most YKD geese had arrived. Ninety percent of BBL geese used the Klamath Basin in autumn, whereas 30% of YKD geese bypassed the Klamath Basin during autumn and instead flew directly to the Central Valley of California. Nearly all BBL geese migrated directly from the Klamath Basin to wintering areas in Mexico, bypassing the Central Valley. Ninety percent of the BBL geese wintered in Mexico, as opposed to <20% of the YKD geese. Wetlands of the Interior Highlands in the state of Chihuahua, particularly Laguna Babicora, were used by >90% of the radio-marked geese in Mexico. Marshes along the West Coast comprised the other important wintering habitat in Mexico. The Sacramento Valley of California was the predominant wintering area for YKD geese. BBL geese migrated north from Mexico into the San Joaquin Valley or Sacramento-San Joaquin Delta of California by the last week of January. Fifty-five percent of the BBL population used the Klamath Basin in spring, but many birds staged in eastern Oregon and western Idaho. In contrast, geese from the YKD staged almost exclusively in the Klamath Basin during spring before flying to staging areas in Alaska. Breeding allopatry and temporal partitioning on staging and wintering areas likely has contributed to the evolution of previously described phenotypic differences between these populations. These two populations, along with the Tule Greater White-fronted Goose (A. a. gambeli), may constitute a portion of a Rassenkreis, a group of subspecies connected by clines, each ecotype of which has independent conservation needs.

The Auk↗

USGS2008

The evolution of volcano-hosted geothermal systems based on deep wells from Karaha-Telaga Bodas, Indonesia

Temperature and pressure surveys, fluid samples, and petrologic analyses of rock samples from deep drill holes at the Karaha - Telaga Bodas geothermal field on the volcanic ridge extending northward from Galunggung Volcano, West Java, have provided a unique opportunity to characterize the evolution of an active volcano-hosted geothermal system. Wells up to 3 km in depth have encountered temperatures as high as 353??C and a weakly altered granodiorite that intruded to within 2 to 3 km of the surface. The intrusion is shallowest beneath the southern end of the field where an acid lake overlies a nearly vertical low resistivity structure (<10 ohm-m) defined by magnetotelluric measurements. This structure is interpreted to represent a vapor-dominated chimney that provides a pathway to the surface for magmatic gases. Four distinct hydrothermal mineral assemblages document the evolution of the geothermal system and the transition from liquid- to vapor-dominated conditions. The earliest assemblage represents the initial liquid-dominated system generated during emplacement of the granodiorite between 5910 ?? 76 and 4200 ?? 150 y BP. Tourmaline, biotite, actinolite, epidote and clay minerals were deposited contemporaneously at progressively greater distances from the intrusive contact (assemblage 1). At 4200 ?? 150 y BP, flank collapse and the formation of the volcano's crater, Kawah Galunggung, resulted in catastrophic decompression and boiling of the hydrothermal fluids. This event initiated development of the modern vapor-dominated regime. Chalcedony and then quartz were deposited as the early low salinity liquids boiled (assemblage 2). Both vapor- and liquid-rich fluid inclusions were trapped in the quartz crystals. Liquid-rich fluid inclusions from the southern part of the field record salinities ranging from 0 to 26 weight percent NaCl- CaCl2 equivalent and locally contain fluorite daughter crystals. We suggest, based on temperature-salinity relationships and evidence of boiling, that these fluids were progressively concentrated as steam was lost from the system. However, mixing with fluids derived from the underlying intrusion or generated during the formation of acid SO4 water on the vapor-dominated chimney margins could have contributed to the observed salinities. As pressures declined, CO2- and SO4-rich steam-heated water drained downward, depositing anhydrite and calcite (assemblage 3) in the fractures, limiting further recharge. Fluid inclusions with salinities up to 31 weight percent NaCl equivalent were trapped in these minerals as the descending water vaporized. The final assemblage is represented by precipitates of NaCl, KCl and FeClx deposited on rock surfaces in portions of the vapor-dominated zone that boiled dry. Vapor-dominated conditions extend over a distance of at least 10 km and to depths below sea level. Deep wells drilled into the underlying liquid-dominated reservoir in the northern and central part of the volcanic ridge produce low salinity fluids representing recent recharge of meteoric and steam-heated water. The evolution of volcanic-hosted vapor-dominated geothermal systems can be described by a five stage model. Stage 1 involves the formation of an over-pressured liquid-dominated geothermal system soon after magmatic intrusion. In Stages 2 and 3, pressures progressively decrease, and a curtain of steam-heated water surrounding a magmatic vapor-dominated chimney at 350??C and 14 ?? 2 MPa develops. The relatively low pressure near the base of the chimney causes liquid inflow adjacent to the intrusion and the development of a secondary marginal vapor-dominated zone. In Stage 4, the magmatic vapor discharge from the intrusion becomes small, vapor pressure declines, and the secondary vapor-dominated zone expands above the intrusion. In Stage 5, the vapor-dominated zone floods because heat from the intrusion is insufficient to boil all liquid inflow. A more common, liquid-dominated volcanic-hosted system the

American Journal of Science↗

USGS1952

Cyclic fluctuations of water level as a basis for determining aquifer transmissibility

In coastal areas, wells near bodies of tidal water frequently exhibit sinusoidal fluctuations of water level, in response to periodic changes of tidewater stage. Inland, the regulation of a surface reservoir often produces correlative changes of ground-water stage in wells adjacent either to the reservoir or to its attendant stream. As the stage of the surface water rises, the head upon the subaqueous outcrop of the aquifer increases and thereby either increases the rate of inflow to the aquifer or reduces the rate of outflow therefrom. The increase in recharge or reduction in discharge results in a general recovery of water level in the aquifer. On the subsequent falling stage this pattern is reversed. When the stage of the surface body fluctuates as a simple harmonic motion a train of sinusoidal waves is propagated shoreward through the sub-outcrop of the aquifer. With increasing distance from the sub-outcrop, the amplitude of the transmitted wave decreases and the time lag of a given maximum or minimum increases.

Report↗

USGS2000

The history of stream gaging in Ohio

Introduction Streams are a natural resource that can influence economic growth and the development of communities. They supply water for many uses, provide habitat for aquatic plants and animals, and sup-port recreational activities such as boat-ing and fishing. The amount of water (flow) in a stream — either too little or too much — can seriously affect these uses and human life. By using a method called stream gaging , information about the flow in a stream and the fluctuations in that flow can be obtained. n its simplest form, stream gaging may consist of measuring any number of the following stream characteristics: stage (or depth), cross-sectional area, velocity, and (or) flow (or discharge). When the depth and velocity are measured at several points across the stream channel so that the flow (or discharge ) is calculated, a streamflow measurement (or discharge measurement ) is made. By making streamflow measurements at the same site on a stream over a wide range of stages, a relation between stage and discharge can be developed. This relation can be used to provide information on the magnitude and fluctuations of flow on a stream. If long-term or continuous information is needed on a specific site, a stream-gaging station can be established. A stream-gaging station is a site where stage is monitored and recorded and streamflow measurements are made to provide a stage-discharge relation. Ever since the first documented streamflow measurement was made in Ohio — on the Sandusky River — stream-gaging information has been used to minimize the effects of floods and droughts, determine locations for water intakes and wastewater-treatment plants, and provide data for many other uses. Today, stream gaging is a routine activity in managing the State’s water resources.

Ohio↗

USGS2014

Flood-tracking chart for the Withlacoochee and Little River Basins in south-central Georgia and northern Florida

The U.S. Geological Survey (USGS), in cooperation with other Federal, State, and local agencies, operates a flood-monitoring system in the Withlacoochee and Little River Basins. This system is a network of automated river stage stations (ten are shown on page 2 of this publication) that transmit stage data through satellite telemetry to the USGS in Atlanta, Georgia and the National Weather Service (NWS) in Peachtree City, Georgia. During floods, the public and emergency response agencies use this information to make decisions about road closures, evacuations, and other public safety issues. This Withlacoochee and Little River Basins flood-tracking chart can be used by local citizens and emergency response personnel to record the latest river stage and predicted flood-crest information along the Withlacoochee River, Little River, and Okapilco Creek in south-central Georgia and northern Florida. By comparing the current stage (water-surface level above a datum) and predicted flood crest to the recorded peak stages of previous floods, emergency response personnel and residents can make informed decisions concerning the threat to life and property.

Florida, Georgia↗

USGS2013

Implications of flume slope on discharge estimates from 0.762-meter H flumes used in edge-of-field monitoring

The effects of longitudinal slope on the estimation of discharge in a 0.762-meter (m) (depth at flume entrance) H flume were tested under controlled conditions with slopes from −8 to +8 percent and discharges from 1.2 to 323 liters per second. Compared to the stage-discharge rating for a longitudinal flume slope of zero, computed discharges were negatively biased (maximum −31 percent) when the flume was sloped downward from the front (entrance) to the back (exit), and positively biased (maximum 44 percent) when the flume was sloped upward. Biases increased with greater flume slopes and with lower discharges. A linear empirical relation was developed to compute a corrected reference stage for a 0.762-m H flume using measured stage and flume slope. The reference stage was then used to determine a corrected discharge from the stage-discharge rating. A dimensionally homogeneous correction equation also was developed, which could theoretically be used for all standard H-flume sizes. Use of the corrected discharge computation method for a sloped H flume was determined to have errors ranging from −2.2 to 4.6 percent compared to the H-flume measured discharge at a level position. These results emphasize the importance of the measurement of and the correction for flume slope during an edge-of-field study if the most accurate discharge estimates are desired.

Open-File Report↗

USGS2014

Colorado River campsite monitoring, Grand Canyon National Park, Arizona, 1998-2012

River rafting trips and hikers use sandbars along the Colorado River in Marble and Grand Canyons as campsites. The U.S. Geological Survey evaluated the effects of Glen Canyon Dam operations on campsite areas on sandbars along the Colorado River in Grand Canyon National Park. Campsite area was measured annually from 1998 to 2012 at 37 study sites between Lees Ferry and Diamond Creek, Arizona. The primary purpose of this report is to present the methods and results of the project. Campsite area surveys were conducted using total station survey methods to outline the perimeter of camping area at each study site. Campsite area is defined as any region of smooth substrate (most commonly sand) with no more than an 8 degree slope and little or no vegetation. We used this definition, but relaxed the slope criteria to include steeper areas near boat mooring locations where campers typically establish their kitchens. The results show that campsite area decreased over the course of the study period, but at a rate that varied by elevation zone and by survey period. Time-series plots show that from 1998 to 2012, high stage-elevation (greater than the 25,000 ft 3 /s stage-elevation) campsite area decreased significantly, although there was no significant trend in low stage-elevation (15,000–20,000 ft 3 /s) campsite area. High stage-elevation campsite area increased after the 2004 and 2008 high flows, but decreased in the intervals between high flows. Although no overall trend was detected for low stage-elevation campsite areas, they did increase after high-volume dam releases equal to or greater than about 20,000 ft 3 /s. We conclude that dam operations have not met the management objectives of the Glen Canyon Adaptive Management program to increase the size of camping beaches in critical and non-critical reaches of the Colorado River between Glen Canyon Dam and Lake Mead.

Arizona↗

USGS2022

Compilation of existing data for sand resource studies in Federal and California State Waters of the San Francisco, Oceanside, and Silver Strand littoral cell study areas along the continental shelf of California—Strategy for field studies and sand resource assessment

California↗

USGS2022

Assessment of significant sand resources in Federal and California State Waters of the San Francisco, Oceanside, and Silver Strand littoral cell study areas along the continental shelf of California

Executive Summary The Sand Resources Project was established through collaborative agreements between the U.S. Geological Survey (USGS), the Bureau of Ocean Energy Management (BOEM), and the California Ocean Protection Council (OPC) with the purpose of evaluating sand and gravel resources in Federal and California State Waters for potential use in future beach-nourishment projects. Project partners worked in collaboration with California Coastal Sediment Management Workgroup (CSMW) members to define priority study areas for this work based on the potential for finding sand within the broader region and the needs for this sand as shown by beach erosion areas of concern in the adjacent littoral cells. The final study areas were defined to be (1) the San Francisco Littoral Cell, (2) the Oceanside Littoral Cell, and (3) the Silver Strand Littoral Cell. A two-stage approach was used to assess the study areas. The initial stage was a synthesis of the existing geophysical and sediment-sampling data in each area. This allowed for evaluations of the data availability, data gaps, and general patterns of sediment thickness and grain size. This synthesis was published in a separate USGS open-file report (Warrick and others, 2022). The findings from this assessment were used to refine study area boundaries and develop sampling plans for stage two of the project. Stage two of the project is the collection, processing, and synthesis of new data, including high-resolution geophysical surveys and sediment cores—this report addresses the second stage. The work focuses on two of the study areas—the San Francisco and the Oceanside Littoral Cells, where several research cruises have been conducted. A more limited, exploratory approach was used for the Silver Strand Littoral Cell, owing to the lack of existing high-resolution bathymetric data for this study area. The data collected provide new information about the three study areas, including sediment thickness, grain-size distributions, and total organic carbon. Sediment in all three study areas of the Sand Resources Study was suitable for beach nourishment, as reflected by their grain-size distributions and sediment thicknesses. For example, sandy sediment in the San Francisco Littoral Cell study area was on and immediately outside of the ebb-tidal bar of the San Francisco Bay, a landform that has a strong influence on grain-size patterns of the region. The presence of thick sediment deposits in this area was interpreted to be a function of tectonics, which has caused physical features that include a graben north of the Golden Gate whose deposits were thicker and siltier than the remaining area. Sandy sediment on the inner and outer parts of the continental shelf in the Oceanside Littoral Cell may be useful for nourishment, whereas the midshelf between these areas was dominated by silty sediment. Sediment in the Silver Strand Littoral Cell, which was only sampled selectively, had the greatest potential for beach nourishment because of the greater prevalence of beach-comparable grain sizes, especially in the more distal and deeper areas where medium sands were found. The Sand Resources Project did identify several sandy regions of the continental shelf that are deeper than dredging technologies currently (2022) available in the United States, which are generally limited to 30 meters (m) water depth or less. Although sandy sediment exists in all three study areas at water depths of 30 m or less, additional sediment supplies—most of which are in Federal Waters—are present in deeper settings, especially for the Oceanside and Silver Strand Littoral Cell study areas. Although the Silver Strand Littoral Cell study area was found to be considerably replete in sand resources, these conclusions are based on a limited sampling exercise across that study area. Thus, it may be beneficial to complete a more thorough characterization of the sediment resources in the Silver Strand Littoral Cell study area if it is determined that a need for sandy coastal sediment exists in this region. As a result of the Sand Resources Project, several areas of sand resources in Federal and California State Waters were found where they were previously unknown. As such, this project may provide important data for future coastal-management decisions in California, and it should provide a model for future investigations of sediment resources in other regions of the State.

California↗