USGS Science⌕ Search

SEARCH · USGS Science

Results for “Mississippi Geology”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 829 records · Page 46Linked to original sources

Coal beneath Federal lands in the United States—Mines, reserves, and resources

The U.S. Geological Survey (USGS) compiled a list of coal mines and tabulated the coal reserves and available coal resources beneath Federal lands in the conterminous United States. Coal resources beneath Federal lands in Alaska are also discussed in this report. In 2024, the 34 coal mines on Federal lands produced more than 261 million short tons of coal. Surface mining is used at 23 of the coal mines, and underground mining is used at 11. These 34 coal mines control more than 4.2 billion short tons of reported coal reserves. Most of the coal mines (31) and more than 98 percent of the reported coal reserves are on Federal lands west of the Mississippi River. Of all the States, Wyoming has the most coal mines on Federal lands (14) and produces the most coal from Federal lands. The Powder River Basin has the most coal mines per basin or coal field operating on Federal lands (12 in Wyoming, 2 in Montana). Most of the available coal resources in the conterminous United States are also west of the Mississippi River. There are five basins or coal fields in the West that each contain available coal resources of more than 25 billion short tons. The USGS estimates that more than 355 billion short tons of available coal resources remain beneath Federal lands in the conterminous United States. Alaska contains substantial quantities of coal resources. The USGS estimates that Alaska has at least 140 billion short tons of identified available coal resources but may ultimately have as much as 5.5 trillion short tons of coal resources.

Circular↗

Seismic background noise levels across the continental United States from USArray Transportable Array: The influence of geology and geography

Since 2004, the most complete estimate of background noise levels across the continental U.S. was attained using 61 broadband seismic stations to calculate power spectral density (PSD) probability density functions. To improve seismic noise estimates across the U.S., we examine vertical component seismic data from the EarthScope USArray Transportable Array seismic network that rolled across the U.S. and southeastern Canada between 2004 and 2015 and form a large (10 TB) PSD database from 1679 stations that contains no smoothing or binning of the spectral estimates. Including station outages, our database has a mean of 98.9% data completeness, and we present maps showing the spatial and temporal variability of seismic noise in six bands of interest between 0.2- and 75-s period. At 0.2 s period, seismic noise across the eastern U.S. is predominantly anthropogenically generated and may be subsequently amplified more than 20 decibels in the sandy and water-saturated sediments of the southeastern U.S. Coastal Plain and Mississippi Embayment. In these sediments, 1 s noise shows similar amplification and is generated through a variety of mechanisms including cultural activity throughout Kentucky and the southeastern Appalachian Mountains, lake waves around the Great Lakes, and ocean waves throughout New England, the Pacific Northwest, and Florida. Both 0.2 and 1 s noise levels are the lowest in the Intermountain West portion of the U.S. We attribute this to a combination of installations on crystalline rocks and reduced population density. Finally, we find that sensors emplaced in sandy, water-saturated sediments observe median, diurnal variations in vertical component power at 18 to 75 s period, which we infer arise through local deformation driven by pressure variations. Ultimately, our results underscore that for shallow (<5 m depth) sensor installation, bedrock provides superior broadband noise performance compared to unconsolidated sediments.

Bulletin of the Seismological Society of America↗

The potential for sea-level-rise-induced barrier island loss: Insights from the Chandeleur Islands, Louisiana, USA

As sea level rises and hurricanes become more intense, barrier islands around the world become increasingly vulnerable to conversion from self-sustaining migrating landforms to submerging or subaqueous sand bodies. To explore the mechanism by which such state changes occur and to assess the factors leading to island disintegration, we develop a suite of numerical simulations for the Chandeleur Islands in Louisiana, U.S.A., which appear to be on the verge of this transition. Our results suggest that the Chandeleurs are likely poised to change state, leading to their demise, within decades depending on future storm history. Contributing factors include high rates of relative sea level rise, limited sediment supply, muddy substrate, current island position relative to former Mississippi River distributary channels, and the effects of changes in island morphology on sediment transport pathways. Although deltaic barrier islands are most sensitive to disintegration because of their muddy substrate, the importance of relative sea level rise rate in determining the timing of threshold crossing suggests that the conceptual models for deltaic barrier island formation and disintegration may apply more broadly in the future.

Louisiana, Mississippi↗

Q for P waves in the sediments of the Virginia Coastal Plain

The seismic quality factor Q for P waves in Atlantic Coastal Plain sediments is estimated using data from the 2004 U.S. Geological Survey seismic survey in eastern Virginia. The estimates are based on spectral ratios derived from reflections and sediment-guided P waves in Late Cretaceous and Tertiary sediments within the annular trough of the Late Eocene Chesapeake Bay impact structure. The estimates of Q for the frequency range of 10-150 Hz are from 75 to 100, with the best estimate of 80 based on multichannel stacking of spectral ratios from receivers in the offset range of 200-2000 m. This result is approximately a factor of 2 larger than the results previously reported for the Charleston, South Carolina, area, and it is approximately one-half of that recently reported for the Mississippi Embayment.

Bulletin of the Seismological Society of America↗

Water resources data, Iowa, water year 2000, Volume 1. surface water--Mississippi River Basin

Water resources data for water year 2000 for Iowa consists of records of stage, discharge, and water quality of streams; stage and contents of lakes and reservoirs; and water levels and water quality of ground water. This report, in two volumes, contains stage or discharge records for 126 gaging stations; stage or contents records for 9 lakes and reservoirs; water-quality records for 4 gaging stations; sediment records for 12 gaging stations; and water levels for 167 ground-water observation wells. Also included are peak-flow data for 93 crest-stage partial-record stations, water-quality data from 45 municipal wells, and precipitation data collected at 6 gaging stations and 2 precipitation sites. Additional water data were collected at various sites not included in the systematic data-collection program, and are published here as miscellaneous measurements and analyses. These data represent that part of the National Water Data System operated by the U.S. Geological Survey and cooperating local, State, and Federal agencies in Iowa.

Iowa↗

Water resources data, Iowa, water year 1999, volume 1. surface water--Mississippi River basin

Water resources data for water year 1999 for Iowa consists of records of stage, discharge, and water quality of streams; stage and contents of lakes and reservoirs; and water levels and water quality of ground water. This report, in two volumes, contains stage or discharge records for 123 gaging stations; stage or contents records for 10 lakes and reservoirs; water-quality records for 4 gaging stations; sediment records for 12 gaging stations; and water levels for 175 ground-water observation wells. Also included are peak-flow data for 93 crest-stage partial-record stations, water-quality data from 67 municipal wells, and precipitation data collected at 6 gaging stations and 2 precipitation sites. Additional water data were collected at various sites not included in the systematic data-collection program, and are published here as miscellaneous measurements and analyses. These data represent that part of the National Water Data System operated by the U.S. Geological Survey and cooperating local, State, and Federal agencies in Iowa.

Iowa↗

Preliminary evaluation of the shale gas prospectivity of the Lower Cretaceous Pearsall Formation in the onshore Gulf Coast region, United States

Recent work by the U.S. Geological Survey indicated that the Lower Cretaceous Pearsall Formation contains an estimated mean undiscovered, technically recoverable unconventional gas resource of 8.8 trillion cubic ft in the Maverick Basin, South Texas. Cumulative gas production from horizontal wells in the core area of the emerging play has exceeded 5 billion cubic ft since 2008. However, very little information is available to characterize the Pearsall Formation as an unconventional gas resource beyond the Maverick Basin in the greater Gulf Coast region. Therefore, this reconnaissance study examines spatial distribution, thickness, organic richness and thermal maturity of the Pearsall Formation in the onshore U.S. Gulf states using wireline logs and drill cuttings sample analysis. Spontaneous potential and resistivity curves of approximately forty wireline logs from wells in five Gulf Coast states were correlated to ascertain the thickness of the Pearsall Formation and delineate its three members: Pine Island Shale, James Limestone or Cow Creek Limestone, and Bexar Shale, in ascending stratigraphic order. In Florida and Alabama the Pearsall Formation is up to about 300 ft thick; in Mississippi, Louisiana, Arkansas, and East Texas, thickness is up to as much as 800 ft. Drill cuttings sampled from 11 wells at depths ranging from 4600 to 19,600 feet subsurface indicate increasingly oxygenated depositional environments (predominance of red shale) towards the eastern part of the basin. Cuttings vary widely in lithology but indicate interbedded clastics and limestones throughout the Pearsall Formation, consistent with previous regional studies. Organic petrographic and geochemical analyses of 17 cutting samples in the Pearsall Formation indicate a wide range in thermal maturity, from immature (0.43% Ro [vitrinite reflectance]) in paleo-high structural locations to the peak oil window (0.99% Ro) in the eastern portion of the Gulf Coast Basin. This is in contrast to dry gas thermal maturity throughout the Pearsall Formation in the South Texas Maverick Basin. Organic carbon content is low overall, even in immature samples, with a range of 0.17 to 1.08 wt.% by Leco in 22 Pearsall Formation samples. The pyrolysis output range was 0.23 to 2.33 mg hydrocarbon/g rock. The thermal maturity and Rock-Eval pyrolysis data and organic petrologic observations from this study will be used to better focus specific areas of investigation where the Pearsall Formation may be prospective as an unconventional hydrocarbon source and reservoir.

Alabama;Arkansas;Louisiana;Mississippi;Oklahoma;Te↗

Construction, geologic, and hydrologic data for observation wells in the Reelfoot Lake area, Tennessee and Kentucky

Twenty-three observation wells were installed at 12 sites in the Reelfoot Lake area of Kentucky and Tennessee during July 1986. The wells were installed to supplement an existing water level network and to provide additional data on the hydraulic characteristics and vertical hydraulic gradients in the alluvial aquifer near Reelfoot Lake. Well yields ranged from less than 20 gallons per minute to about 140 gallons per minute. The specific capacities of the wells ranged from less than 1 to 17.1 gallons per minute per foot of drawdown. Three stratigraphic sequences were encountered during drilling. Clay and silty clay was about 40 feet deep near the southwest corner of Reelfoot Lake. Predominantly medium- to coarse grained sand occurred below about 15 feet of silt and clay near the west and northwest sides of Reelfoot Lake. Along the western limit of the study area, near Lake No. 9 and the Mississippi River, about 20 to 30 feet of silt and silty sand occurred below land surface.

Kentucky, Tennessee↗

Development and application of a groundwater/surface-water flow model using MODFLOW-NWT for the Upper Fox River Basin, southeastern Wisconsin

The Fox River is a 199-mile-long tributary to the Illinois River within the Mississippi River Basin in the states of Wisconsin and Illinois. For the purposes of this study the Upper Fox River Basin is defined as the topographic basin that extends from the upstream boundary of the Fox River Basin to a large wetland complex in south-central Waukesha County called the Vernon Marsh. The objectives for the study are to (1) develop a baseline study of groundwater conditions and groundwater/surface-water interactions in the shallow aquifer system of the Upper Fox River Basin, (2) develop a tool for evaluating possible alternative water-supply options for communities in Waukesha County, and (3) contribute to the methodology of groundwater-flow modeling by applying the recently published U.S. Geological Survey MODFLOW-NWT computer code, (a Newton formulation of MODFLOW-2005 intended for solving difficulties involving drying and rewetting nonlinearities of the unconfined groundwater-flow equation) to overcome computational problems connected with fine-scaled simulation of shallow aquifer systems by means of thin model layers. To simulate groundwater conditions, a MODFLOW grid is constructed with thin layers and small cell dimensions (125 feet per side). This nonlinear unconfined problem incorporates the streamflow/lake (SFR/LAK) packages to represent groundwater/surface-water interactions, which yields an unstable solution sensitive to initial conditions when solved using the Picard-based preconditioned-gradient (PCG2) solver. A particular problem is the presence of many isolated wet water-table cells over dry cells, causing the simulated water table to assume unrealistically high values. Attempts to work around the problem by converting to confined conditions or converting active to inactive cells introduce unacceptable bias. Application of MODFLOW-NWT overcomes numerical problem by smoothing the transition from wet to dry cells and keeps all cells active. The simulation is insensitive to initial conditions and the water-table trend is smooth across layers. The MODFLOW-NWT code permits rigorous calibration and also robust application of the model to transient scenarios. Runtimes on a 64-bit computer are kept reasonably short by use of updated initial conditions and informed choices of solver parameters. The shallow aquifer system consists of unconsolidated material of varying thickness over Silurian dolomite. The unconsolidated material, largely of glacial origin, contains fine-textured and coarse-textured deposits that vary in permeability over short distances. This study at least partly encompasses the inevitable uncertainty in the hydraulic conductivity zones by developing two models&mdash;one favors the continuity of fine-grained deposits and a second favors the continuity of coarse-grained deposits. The separate calibration processes for the fine-favored and coarse-favored models using MODFLOW-NWT and the nonlinear regression algorithms in the parameter estimation (PEST) code produce distinct parameter values for hydraulic conductivity zones, storage parameters, and streambed conductance zones. Both models are applied to a hypothetical scenario involving 27 "riparian" wells completed adjacent to the river channel and open to the shallow aquifer systems along a 10-mile stretch of the Fox River. The results suggest that a riparian well system withdrawing about 9 million gallons per day would induce about one-third to one-half its total discharge from the river, and that this riverbank inducement would appreciably limit drawdown around the hypothetical wells.

Wisconsin↗

Simulation of flow from an aquifer to a partially penetrating trench

Construction of the Tennessee-Tombigbee Waterway in northeast Mississippi will involve dewatering as much as 46 m of an unconfined aquifer near the Tennessee Valley divide. Dewatering by trenching is one of the proposed methods. Methods of calculating effects of dewatering by trenching have been heretofore limited to situations where ideal conditions such as isotropic aquifers and fully penetrating trenches occur. In order to study the effects of trenching on the water table in the more complicated hydrologic system in northeast Mississippi, a two-dimensional cross-sectional digital model was developed from an existing two-dimensional digital model. To make the solutions obtained from the model applicable to any aquifer thickness or other hydrologic condition, a technique for nondimensional simulation was developed. With these techniques, nondimensional water-surface profiles were generated for given stages of trench penetration of the aquifer and for different ratios of anisotropy.

Mississippi↗

Karst geology of the Upper Midwest, USA

Karst in the Upper Midwest occurs within a thick sequence of mixed carbonate and siliciclastic Cambrian through Pennsylvanian sedimentary rocks, with a minor occurrence of karst in Proterozoic sandstone. Deposition of the sediments occurred on a marine epeiric ramp that spanned much of the North American continent through most of the Paleozoic. The Upper Midwest region experienced dramatic changes in sea level over geologic time, resulting in the observed sequence of interbedded carbonate and clastic rocks. The greatest degree of karst development occurs within (1) the Lower Ordovician Prairie du Chien Group below the Sauk-Tippecanoe (Knox) unconformity, (2) the Upper Ordovician Galena Group, (3) the Middle and Upper Devonian Wapsipinicon and Cedar Valley Groups, and (4) the Middle Mississippian Mammoth Cave Group and correlative formations. Uplift and exposure of the rocks likely occurred in the Permian, with some later deposition of Cretaceous terrestrial sediments atop the marine strata. Nearly all the Cenozoic sedimentary units were removed by ice sheets during the Pleistocene; however, pockets of Cretaceous sediments persist on the margins of the Driftless Area, a region of the Upper Mississippi River Valley that remained largely free of ice during the last ice age.

Book chapter↗

Ground-water conditions and problems in the Upper Mississippi River Embayment

The Upper Mississippi River Embayment is a region of about 45,000 square miles in the Mississippi River Valley extending from the vicinity of the 34th parallel northward to the mouth of the Ohio River. It includes parts of Arkansas, Mississippi, Tennessee, Kentucky, and Missouri. In 1940 about 2,700,000 people inhabited the region.Ground water is one of the most valuable natural resources of the region. It is estimated that 95 per cent of all the water used in the Upper Embayment comes from the ground.Structurally the Embayment is a downwarped, downfaulted trough in Paleozoic rocks, in which have been deposited sediments ranging in age from Cretaceous to Recent. Very productive water-bearing formations extend throughout most of the region but the total quantity of water perennially available is unknown, and little information is available on the quality of the water.The formations comprise a natural hydraulic system underlying parts of several States, and a study of the geology and hydrology of the entire region is needed. Such a study is necessary because additional ground-water supplies will be required with the future development of the region. In order to develop the region wisely the quantity and quality of the water perennially available must be known.

Alabama, Arkansas, Illinois, Kentucky, Missouri, T↗

Attributes for MRB_E2RF1 Catchments by Major River Basins in the Conterminous United States: Normalized Atmospheric Deposition for 2002, Total Inorganic Nitrogen

This tabular data set represents the average normalized atmospheric (wet) deposition, in kilograms per square kilometer multiplied by 100, of Total Inorganic Nitrogen for the year 2002 compiled for every MRB_E2RF1 catchment of selected Major River Basins (MRBs, Crawford and others, 2006). Estimates of Total Inorganic Nitrogen deposition are based on National Atmospheric Deposition Program (NADP) measurements (B. Larsen, U.S. Geological Survey, written. commun., 2007). De-trending methods applied to the year 2002 are described in Alexander and others, 2001. NADP site selection met the following criteria: stations must have records from 1995 to 2002 and have a minimum of 30 observations. The MRB_E2RF1 catchments are based on a modified version of the U.S. Environmental Protection Agency's (USEPA) ERF1_2 and include enhancements to support national and regional-scale surface-water quality modeling (Nolan and others, 2002; Brakebill and others, 2011). Data were compiled for every MRB_E2RF1 catchment for the conterminous United States covering New England and Mid-Atlantic (MRB1), South Atlantic-Gulf and Tennessee (MRB2), the Great Lakes, Ohio, Upper Mississippi, and Souris-Red-Rainy (MRB3), the Missouri (MRB4), the Lower Mississippi, Arkansas-White-Red, and Texas-Gulf (MRB5), the Rio Grande, Colorado, and the Great basin (MRB6), the Pacific Northwest (MRB7) river basins, and California (MRB8).

Data Series↗

Attributes for MRB_E2RF1 Catchments by Major River Basins in the Conterminous United States: Normalized Atmospheric Deposition for 2002, Ammonium (NH4)

This tabular data set represents the average normalized (wet) deposition, in kilograms per square kilometer multiplied by 100, of ammonium (NH4) for the year 2002 compiled for every MRB_E2RF1 catchment of the Major River Basins (MRBs, Crawford and others, 2006). Estimates of NH4 deposition are based on National Atmospheric Deposition Program (NADP) measurements (B. Larsen, U.S. Geological Survey, written. commun., 2007). De-trending methods applied to the year 2002 are described in Alexander and others, 2001. NADP site selection met the following criteria: stations must have records from 1995 to 2002 and have a minimum of 30 observations. The MRB_E2RF1 catchments are based on a modified version of the U.S. Environmental Protection Agency's (USEPA) ERF1_2 and include enhancements to support national and regional-scale surface-water quality modeling (Nolan and others, 2002; Brakebill and others, 2011). Data were compiled for every MRB_E2RF1 catchment for the conterminous United States covering New England and Mid-Atlantic (MRB1), South Atlantic-Gulf and Tennessee (MRB2), the Great Lakes, Ohio, Upper Mississippi, and Souris-Red-Rainy (MRB3), the Missouri (MRB4), the Lower Mississippi, Arkansas-White-Red, and Texas-Gulf (MRB5), the Rio Grande, Colorado, and the Great basin (MRB6), the Pacific Northwest (MRB7) river basins, and California (MRB8).

Data Series↗

Attributes for MRB_E2RF1 Catchments by Major River Basins in the Conterminous United States: Normalized Atmospheric Deposition for 2002, Nitrate (NO3)

This tabular data set represents the average normalized (wet) deposition, in kilograms per square kilometer multiplied by 100, of Nitrate (NO3) for the year 2002 compiled for every MRB_E2RF1 catchment of the Major River Basins (MRBs, Crawford and others, 2006). Estimates of NO3 deposition are based on National Atmospheric Deposition Program (NADP) measurements (B. Larsen, U.S. Geological Survey, written. commun., 2007). De-trending methods applied to the year 2002 are described in Alexander and others, 2001. NADP site selection met the following criteria: stations must have records from 1995 to 2002 and have a minimum of 30 observations. The MRB_E2RF1 catchments are based on a modified version of the U.S. Environmental Protection Agency's (USEPA) ERF1_2 and include enhancements to support national and regional-scale surface-water quality modeling (Nolan and others, 2002; Brakebill and others, 2011). Data were compiled for every MRB_E2RF1 catchment for the conterminous United States covering New England and Mid-Atlantic (MRB1), South Atlantic-Gulf and Tennessee (MRB2), the Great Lakes, Ohio, Upper Mississippi, and Souris-Red-Rainy (MRB3), the Missouri (MRB4), the Lower Mississippi, Arkansas-White-Red, and Texas-Gulf (MRB5), the Rio Grande, Colorado, and the Great basin (MRB6), the Pacific Northwest (MRB7) river basins, and California (MRB8).

Data Series↗

Quaternary sediment thickness and bedrock topography of the glaciated United States east of the Rocky Mountains

Beginning roughly 2.6 million years ago, global climate entered a cooling phase known as the Pleistocene Epoch. As snow in northern latitudes compacted into ice several kilometers thick, it flowed as glaciers southward across the North American continent. These glaciers extended across the northern United States, dramatically altering the landscape they covered. East of the Rocky Mountains, the ice coalesced into continental glaciers (called the Laurentide Ice Sheet) that at times blanketed much of the north-central and northeastern United States. To the west of the Laurentide Ice Sheet, glaciers formed in the mountains of western Canada and the United States and coalesced into the Cordilleran ice sheet; this relatively smaller ice mass extended into the conterminous United States in the northernmost areas of western Montana, Idaho, and Washington. Throughout the Pleistocene, landscape alteration occurred by (1) glacial erosion of the rocks and sediments; (2) redeposition of the eroded earth materials in a form substantially different from their source rocks, in terms of texture and overall character; and (3) disruption of preexisting drainage patterns by the newly deposited sediments. In many cases, pre-glacial drainage systems (including, for example, the Mississippi River) were rerouted because their older drainage courses became blocked with glacial sediment. The continental glaciers advanced and retreated many times across those areas. During each ice advance, or glaciation, erosion and deposition occurred, and the landscape was again altered. Through successive glaciations, the landscape and the bedrock surface gradually came to resemble their present configurations. As continental ice sheets receded and the Pleistocene ended, erosion and deposition of sediment (for example in stream valleys) continued to shape the landscape up to the present day (albeit to a lesser extent than during glaciation). The interval of time since the last recession of the glaciers is called the Holocene and, together with the Pleistocene, constitutes the Quaternary Period of geologic time; this publication characterizes the three-dimensional geometry of the Quaternary sediments and the bedrock surface that lies beneath. The pre-glacial landscape was underlain mostly by weathered bedrock generally similar in nature to that found in many areas of the non-glaciated United States. Glacial erosion and redeposition of earth materials produced a young, mineral-rich soil that formed the basis for the highly productive agricultural economy in the U.S. midcontinent. Extensive buried sands and gravels within the glacial deposits also provided a stimulus to other economic sectors by serving as high-quality aquifers supplying groundwater to the region’s industry and cities. An understanding of the three-dimensional distribution of these glacial sediments has direct utility for addressing various societal issues including groundwater quality and supply, and landscape and soil response to earthquake-induced shaking. The Quaternary sediment thickness map and bedrock topographic map shown here provide a regional overview and are intended to supplement the more detailed work on which they are based. Detailed mapping is particularly useful in populated areas for site-specific planning. In contrast, regional maps such as these serve to place local, detailed mapping in context; to permit the extrapolation of data into unmapped areas; and to depict large-scale regional geologic features and patterns that are beyond the scope of local, detailed mapping. They also can enhance the reader’s general understanding of the region’s landscape and geologic history and provide a source of information for regional decision making that could benefit by improved predictability of bedrock depth beneath the unconsolidated Quaternary sediments. To enable these maps to be analyzed in conjunction with other types of information, this publication also includes the map data in GIS compatible format.

Scientific Investigations Map↗

Hydrogeologic and water-quality characteristics of the Prairie du Chien-Jordan aquifer, Southeast Minnesota

Quality of water in the Prairie du Chien-Jordan aquifer is generally good, except for some localized contamination, Coal-tar derivatives that contaminate the aquifer in St. Louis Park, a western suburb in the Twin Cities Metropolitan Area, pose the most serious threat to water quality. High hardness and iron concentration limit suitability for municipal and industrial use in parts of extreme southeast Minnesota. Confining beds of bedrock and drift, however, protect most of the aquifer from surface pollutants. The Prairie du Chien-Jordan aquifer is part of a sequence of sedimentary bedrock units in southeast Minnesota. The Jordan Sandstone is a white to yellow, fine- to coarse-grained sandstone. The Prairie du Chien Group comprises two dolomitic formations that are vuggy and fractured and interbedded with thin layers of shale. The aquifer formations were deposited in Paleozoic seas that occupied the Hollandale embayment. The aquifer dips toward the interior of the embayment where it is as deep as 750 feet below land surface and as thick as 500 feet. Permeability is secondary in the Prairie du Chien Group because of solution cavities and fractures, and intergranular in the Jordan Sandstone. Water in the aquifer is confined except in the eastern part. Water generally flows to the north and east into the Minnesota and Mississippi Rivers. A ground-water divide separates part of the flow southward into Iowa. This aquifer supplies more water than any other bedrock one in the State. Calcium magnesium bicarbonate type water is most common in the aquifer. Calcium and sulfate and, to a lesser degree sodium and magnesium, increase in concentration toward the southwestern part of the study area. Bicarbonate concentration, on the other hand, decreases toward the southwestern corner of the study area. Leakage from overlying Cretaceous deposits is the source of much of the sulfate and other minerals in the southwest. This report is one of a series on the hydrogeology and water quality of the 14 principal aquifers in Minnesota prepared by the U. S. Geological Survey. The U. S. Environmental Protection Agency requested these studies because of the need for information to develop its Underground Injection Control Program.

Minnesota↗

Seismic source characterization in central and eastern United States

This report documents earthquake geology studies conducted in the central and eastern United States (CEUS) between 2018 and 2023. The overarching goal of the earthquake geology studies was to identify and characterize fault sources in the New Madrid seismic zone, the eastern Tennessee seismic zone, and the Charleston seismic zone. These studies primarily relied on the interpretation of high-resolution topography, morphotectonic analysis of 10-meter (m) digital elevation models, field reconnaissance, and integration with new and existing subsurface datasets. Results from each study are placed into a seismic hazard framework. The first two chapters focus on the New Madrid seismic zone, which is the most seismically active region in the CEUS, to better characterize the southern extent of the Reelfoot fault in the Obion River valley, and identify and characterize proposed faults along the margins of Crowleys Ridge in the center of the Mississippi River embayment. Crowleys Ridge is a ~320-kilometer (km) long landform that has been proposed to be formed by intermittent faulting or erosion from the Mississippi River. Legacy seismic reflection data documented Eocene, Mesozoic, and older strata offset by faults on the margins of the ridge (Van Arsdale et al., 1999). A morphotectonic analysis of the topography along Crowleys Ridge indicated southward increases in catchment hypsometric integral and slope. Neotectonic mapping on high-resolution lidar data revealed a series of subparallel linear fault and fold scarps along the margins of Crowleys Ridge. These scarps offset previously mapped fluvial and alluvial surfaces that were <56 thousand years ago (ka) (Rittenour et al., 2007). Integration of new seismic reflection and airborne electromagnetic data, legacy seismic data, with the landscape morphotectonic analysis and neotectonic mapping supports the interpretation that Crowleys Ridge is bound by faults that have been active in the late Quaternary but do not experience modern seismicity. By placing these newly characterized faults into the regional framework, the Crowleys Ridge faults can be interpreted as thrust faults associated with stepovers in the overall dextral fault system, similar to the Reelfoot fault. The results of these studies indicate that seismicity has migrated eastward during the late Quaternary, with the Reelfoot fault accommodating much of the modern-day strain. The Reelfoot fault ruptured in the 1811-1812 New Madrid earthquake sequence (Fuller, 1912) and has a record of past large earthquakes (Tuttle et al., 2002; 2019). Whereas the northern extent of the fault intersects the Mississippi River and has well-expressed surface deformation, questions remained regarding the southern limit of seismicity, deformation, and overall fault length. Analysis of <25 ka river terraces along the Obion River valley in western Tennessee revealed subtle fold scarps, with increased magnitudes of deformation on progressively older terraces, indicative of a longer record of fault movement than has been documented by paleoseismic and paleoliquefaction studies alone (e.g., Kelson et al., 1996; Gold et al., 2019; Tuttle et al., 2019). The third chapter integrates surface and subsurface data to assess the landscape record of surface deformation in the eastern Tennessee seismic zone (ETSZ), which is the second most seismically active region in the CEUS. Seismicity in the ETSZ is deep (5-26 km) and focused in the Proterozoic rock below the Paleozoic detachment. Although the region has experienced moderate (≤ Mw 4.8) seismicity in the instrumental record, the lack of a large historical earthquake and limited paleoseismic and paleoliquefaction evidence of prehistoric large ground shaking events have made seismic hazard characterization of the region challenging. Two models have emerged to predict the style and orientation of active surface deformation in the ETSZ. One suggests that surface rupturing earthquakes would exploit pre-existing faults along the regional structural grain (Cox et al., 2022). The second model advocates for primarily strike-slip motion on east-west or north-south faults, following analyses of recent seismicity (Chapman et al., 1997; Dunn and Chapman, 2006; Daniels and Peng, 2022) and the modern stress field (Levandowski et al., 2018). In our analysis, neotectonic mapping of high-resolution lidar data reveals a concentration of lineaments with east-west orientations, with some corresponding to previously mapped east-west faults that crosscut the northeast-southwest regional structural grain from the Paleozoic orogeny. A morphotectonic analysis of catchments and river segments within the same lithology indicates subtle differences that may be indicative of a longer-term tectonic uplift signal. These changes in morphotectonic metrics spatially correspond to newly mapped lineaments and previously mapped east-west trending faults. Within a regional framework, we suggest that diffuse surface deformation associated with deep seismicity is accommodated on a network on east-west faults. However, further work is needed to better understand the potential late Pleistocene fault activity of these lineaments, and we propose that the ETSZ is still best characterized as an area source in seismic hazard models. The final chapter presents preliminary work to create a geographic information system (GIS) database of recent studies analyzing surface and subsurface datasets and interpretations in the Charleston seismic zone, South Carolina. This GIS database will serve as a foundation for future work to analyze new quality level 1 (QL1; <0.5 m resolution) lidar data over the 1886 magnitude (M) 7 Charleston epicentral region to identify possible fault source sources responsible for the 1886 or other surface-rupturing events. This chapter briefly summarizes three new subsurface datasets, including seismic reflection (Pratt et al., 2022; Liberty, 2022) and seismicity data (Chapman et al., 2016), and one new surface dataset (Marple and Hurd, 2020), and their interpretations of potentially active lineaments and faults in the region.

central and eastern United States↗