USGS Science⌕ Search

SEARCH · USGS Science

Results for “Map”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 829 records · Page 46Linked to original sources
USGS2013

Flood-inundation maps for the Tippecanoe River near Delphi, Indiana

Digital flood-inundation maps for an 11-mile reach of the Tippecanoe River that extends from County Road W725N to State Road 18 below Oakdale Dam, Indiana (Ind.), were created by the U.S. Geological Survey (USGS) in cooperation with the Indiana Department of Transportation. The inundation maps, which can be accessed through the USGS Flood Inundation Mapping Science Web site at http://water.usgs.gov/osw/flood_inundation/, depict estimates of the areal extent of flooding corresponding to selected water levels (stages) at USGS streamgage 03333050, Tippecanoe River near Delphi, Ind. Current conditions at the USGS streamgages in Indiana may be obtained online at http://waterdata.usgs.gov/in/nwis/current/?type=flow. In addition, the information has been provided to the National Weather Service (NWS) for incorporation into their Advanced Hydrologic Prediction Service (AHPS) flood warning system (http://water.weather.gov/ahps/). The NWS forecasts flood hydrographs at many places that are often co-located at USGS streamgages. That forecasted peak-stage information, also available on the Internet, may be used in conjunction with the maps developed in this study to show predicted areas of flood inundation. In this study, water-surface profiles were simulated for the stream reach by means of a hydraulic one-dimensional step-backwater model. The model was calibrated by using the most current stage-discharge relation at USGS streamgage 03333050, Tippecanoe River near Delphi, Ind., and USGS streamgage 03332605, Tippecanoe River below Oakdale Dam, Ind. The hydraulic model was then used to simulate 13 water-surface profiles for flood stages at 1-foot intervals reference to the streamgage datum and ranging from bankfull to approximately the highest recorded water level at the streamgage. The simulated water-surface profiles were then combined with a geographic information system digital elevation model (derived from Light Detection and Ranging (LiDAR) data) in order to delineate the area flooded at each water level. A flood inundation map was generated for each water-surface profile stage (13 maps in all) so that, for any given flood stage, users will be able to view the estimated area of inundation. The availability of these maps, along with current stage from USGS streamgages and forecasted stream stages from the NWS, provides emergency management personnel and residents with information that is critical for flood response activities such as evacuations and road closures, as well as for post-flood recovery efforts.

Indiana↗
USGS2014

Lidar-revised geologic map of the Poverty Bay 7.5' quadrangle, King and Pierce Counties, Washington

For this map, we interpreted a 6-ft-resolution lidar digital elevation model combined with the geology depicted on the Geologic Map of the Poverty Bay 7.5' Quadrangle, King and Pierce Counties, Washington (Booth and others, 2004b). The authors of the 2004 map described, interpreted, and located the geology on the 1:24,000-scale topographic map of the Poverty Bay 7.5' quadrangle. The topographic map, published in 1997 but compiled in 1957, includes planimetry derived from 1990 imagery and 20-ft contours, nominal horizontal resolution of 40 ft (12 m), and nominal vertical accuracy of 10 ft (3 m). Similar to many surficial geologic maps, much of the geology in Booth and others (2004b) was interpreted from landforms portrayed on the topographic map. In 2003, the Puget Sound Lidar Consortium obtained a lidar-derived digital elevation model (DEM) for the Puget Sound region including all of the Poverty Bay 7.5' quadrangle. For a brief description of lidar (LIght Detection And Ranging) and this data acquisition program, see Haugerud and others (2003). This new DEM has a horizontal resolution and accuracy of 6 ft (2 m) and vertical accuracy of approximately 1 ft (0.3 m). The greater resolution and accuracy of the lidar DEM have facilitated a new interpretation of the geology, especially the distribution and relative age of some surficial deposits.

Washington↗
USGS2015

Geologic map of the Vashon 7.5' quadrangle and selected areas, King County, Washington

This map is an interpretation of a 6-ft-resolution lidar-derived digital elevation model combined with geology by Derek B. Booth and Kathy Goetz Troost. Field work by Booth and Troost was located on the 1:24,000-scale topographic map of the Vashon and Des Moines 7.5' quadrangles that were published in 1997 and 1995, respectively. Much of the geology was interpreted from landforms portrayed on the topographic maps, supplemented by field exposures, where available. In 2001, the Puget Sound Lidar Consortium (see http://pugetsoundlidar.org/) obtained a lidar-derived digital elevation model (DEM) for Vashon Island and the Des Moines quadrangle. For a brief description of lidar and this data acquisition program, see Haugerud and others (2003). This new DEM has a horizontal resolution of 6 ft (1.83 m) and mean vertical accuracy of about 1 ft (about 0.3 m). The greater resolution and accuracy of the lidar DEM facilitated a much-improved interpretation of many aspects of the surficial geology, especially the distribution and relative age of landforms and the materials inferred to comprise them. Booth and Troost were joined by Tabor to interpret the new lidar DEM but have done no futher field work for this map. This map, the Vashon quadrangle and selected adjacent areas, encompasses most of Vashon Island, Maury Island, and Three Tree Point in the south-central Puget Sound. One small area in the Vashon quadrangle on the east side of Puget Sound is excluded from this map but included on the adjacent Seattle quadrangle (Booth and others, 2005). The map displays a wide variety of surficial geologic deposits, which reflect many geologic environments and processes. Multiple ice-sheet glaciations and intervening nonglacial intervals have constructed a complexly layered sequence of deposits that underlie both islands to a depth of more than 300 m below sea level. These deposits not only record glacial and nonglacial history but also control the flow and availability of ground water, determine the susceptibility of the slopes to landslides, and provide economic reserves of sand and gravel. The islands are surrounded by channels of Puget Sound, some as deep as the islands are high (>600 ft (~200 m)). The shorelines provide many kilometers of well-exposed coastal outcrops that reveal abundant lithologic and stratigraphic details not ordinarily displayed in the heavily vegetated Puget Lowland.

Washington↗
USGS2015

Seabed maps showing topography, ruggedness, backscatter intensity, sediment mobility, and the distribution of geologic substrates in Quadrangle 6 of the Stellwagen Bank National Marine Sanctuary Region offshore of Boston, Massachusetts

The U.S. Geological Survey (USGS), in cooperation with the National Oceanic and Atmospheric Administration's National Marine Sanctuary Program, has conducted seabed mapping and related research in the Stellwagen Bank National Marine Sanctuary (SBNMS) region since 1993. The area is approximately 3,700 square kilometers (km 2 ) and is subdivided into 18 quadrangles. Seven maps, at a scale of 1:25,000, of quadrangle 6 (211 km 2 ) depict seabed topography, backscatter, ruggedness, geology, substrate mobility, mud content, and areas dominated by fine-grained or coarse-grained sand. Interpretations of bathymetric and seabed backscatter imagery, photographs, video, and grain-size analyses were used to create the geology-based maps. In all, data from 420 stations were analyzed, including sediment samples from 325 locations. The seabed geology map shows the distribution of 10 substrate types ranging from boulder ridges to immobile, muddy sand to mobile, rippled sand. Mapped substrate types are defined on the basis of sediment grain-size composition, surface morphology, sediment layering, the mobility or immobility of substrate surfaces, and water depth range. This map series is intended to portray the major geological elements (substrates, topographic features, processes) of environments within quadrangle 6. Additionally, these maps will be the basis for the study of the ecological requirements of invertebrate and vertebrate species that utilize these substrates and guide seabed management in the region.

Massachusetts↗
USGS2016

Geologic map of the Vancouver and Orchards quadrangles and parts of the Portland and Mount Tabor quadrangles, Clark County, Washington, and Multnomah County, Oregon

Introduction This is a 1:24,000-scale geologic map of the Vancouver and Orchards quadrangles and parts of the Portland and Mount Tabor quadrangles in the States of Washington and Oregon. The map area is within the Portland Basin and includes most of the city of Vancouver, Washington; parts of Clark County, Washington; and a small part of northwestern Multnomah County, Oregon. The Columbia River flows through the southern part of the map area, generally forming the southern limit of mapping. Mapped Quaternary geologic units include late Pleistocene cataclysmic flood deposits, eolian deposits, and alluvium of the Columbia River and its tributaries. Older deposits include Miocene to Pleistocene alluvium from an ancestral Columbia River. Regional geologic structures are not exposed in the map area but are inferred from nearby mapping.

Oregon, Washington↗
USGS2017

Geologic map of the Fittstown 7.5΄ quadrangle, Pontotoc and Johnston Counties, Oklahoma

This 1:24,000-scale geologic map includes new geologic mapping as well as compilation and revision of previous geologic maps in the area. Field investigations were carried out during 2009–2011 that included mapping and investigations of the geology and hydrology of the Chickasaw National Recreation Area, Oklahoma, west of the map area. The Fittstown quadrangle is in Pontotoc and Johnston Counties in south-central Oklahoma, which is in the northeastern part of the Arbuckle Mountains. The Arbuckle Mountains are composed of a thick sequence of Paleozoic sedimentary rocks that overlie Lower Cambrian and Precambrian igneous rocks; these latter rocks are not exposed in the quadrangle. From Middle to Late Pennsylvanian time, the Arbuckle Mountains region was folded, faulted, and uplifted. Periods of erosion followed these Pennsylvanian mountain-building events, beveling this region and ultimately developing the current subtle topography that includes hills and incised uplands. The southern and northwestern parts of the Fittstown quadrangle are directly underlain by Lower Ordovician dolomite of the Arbuckle Group that has eroded to form an extensive, stream-incised upland containing the broad, gently southeast-plunging, Pennsylvanian-age Hunton anticline. The northeastern part of the map area is underlain by Middle Ordovician to Pennsylvanian limestone, shale, and sandstone units that predominantly dip northeast and form the northeastern limb of the Hunton anticline; this limb is cut by steeply dipping, northwest-southeast striking faults of the Franks fault zone. This limb and the Franks fault zone define the southwestern margin of the Franks graben, which is underlain by Pennsylvanian rocks in the northeast part of the map area.

Oklahoma↗
USGS2017

Geologic map of the upper Arkansas River valley region, north-central Colorado

This 1:50,000-scale U.S. Geological Survey geologic map represents a compilation of the most recent geologic studies of the upper Arkansas River valley between Leadville and Salida, Colorado. The valley is structurally controlled by an extensional fault system that forms part of the prominent northern Rio Grande rift, an intra-continental region of crustal extension. This report also incorporates new detailed geologic mapping of previously poorly understood areas within the map area and reinterprets previously studied areas. The mapped region extends into the Proterozoic metamorphic and intrusive rocks in the Sawatch Range west of the valley and the Mosquito Range to the east. Paleozoic rocks are preserved along the crest of the Mosquito Range, but most of them have been eroded from the Sawatch Range. Numerous new isotopic ages better constrain the timing of both Proterozoic intrusive events, Late Cretaceous to early Tertiary intrusive events, and Eocene and Miocene volcanic episodes, including widespread ignimbrite eruptions. The uranium-lead ages document extensive about 1,440-million years (Ma) granitic plutonism mostly north of Buena Vista that produced batholiths that intruded an older suite of about 1,760-Ma metamorphic rocks and about 1,700-Ma plutonic rocks. As a result of extension during the Neogene and possibly latest Paleogene, the graben underlying the valley is filled with thick basin-fill deposits (Dry Union Formation and older sediments), which occupy two sub-basins separated by a bedrock high near the town of Granite. The Dry Union Formation has undergone deep erosion since the late Miocene or early Pliocene. During the Pleistocene, ongoing stream incision by the Arkansas River and its major tributaries has been interrupted by periodic aggradation. From Leadville south to Salida as many as seven mapped alluvial depositional units, that range in age from early to late Pleistocene, record periodic aggradational events along these streams that are commonly associated with deposition of glacial outwash or bouldery glacial-flood deposits. Many previously unrecognized Neogene and Quaternary faults, some of the latter with possible Holocene displacement, have been identified on lidar (light detection and ranging) imagery which covers 59 percent of the map area. This imagery has also permitted more accurate remapping of glacial, fluvial, and mass-movement deposits and aided in the determination of their relative ages. Recently published 10 beryllium cosmogenic surface-exposure ages, coupled with our new geologic mapping, have revealed the timing and rates of late Pleistocene deglaciation. Glacial dams that impounded the Arkansas River at Clear Creek and possibly at Pine Creek failed at least three times during the middle and late Pleistocene, resulting in catastrophic floods and deposition of enormous boulders and bouldery alluvium downstream; at least two failures occurred during the late Pleistocene during the Pinedale glaciation.

Colorado↗
USGS2017

Lidar-revised geologic map of the Des Moines 7.5' quadrangle, King County, Washington

This map is an interpretation of a modern lidar digital elevation model combined with the geology depicted on the Geologic Map of the Des Moines 7.5' Quadrangle, King County, Washington (Booth and Waldron, 2004). Booth and Waldron described, interpreted, and located the geology on the 1:24,000-scale topographic map of the Des Moines 7.5' quadrangle. The base map that they used was originally compiled in 1943 and revised using 1990 aerial photographs; it has 25-ft contours, nominal horizontal resolution of about 40 ft (12 m), and nominal mean vertical accuracy of about 10 ft (3 m). Similar to many geologic maps, much of the geology in the Booth and Waldron (2004) map was interpreted from landforms portrayed on the topographic map. In 2001, the Puget Sound Lidar Consortium obtained a lidar-derived digital elevation model (DEM) for much of the Puget Sound area, including the entire Des Moines 7.5' quadrangle. This new DEM has a horizontal resolution of about 6 ft (2 m) and a mean vertical accuracy of about 1 ft (0.3 m). The greater resolution and accuracy of the lidar DEM compared to topography constructed from air-photo stereo models have much improved the interpretation of geology, even in this heavily developed area, especially the distribution and relative age of some surficial deposits. For a brief description of the light detection and ranging (lidar) remote sensing method and this data acquisition program, see Haugerud and others (2003).

Washington↗
USGS2018

Geologic map of the central Beaverhead Mountains, Lemhi County, Idaho, and Beaverhead County, Montana

This geologic map of the central Beaverhead Mountains portrays a complex geologic history of depositional basin development interspersed with deformational events. Generalized geology for young basins, compiled from sources on both sides of the range, is combined with newly mapped bedrock geology to better integrate geologic development of the map area. Successive extensional basins were obliquely oriented across deformed strata of each preceding basin and of the Paleoproterozoic basement. Strata deposited in these basins include (1) thick fine-grained arkosic strata of the Mesoproterozoic Lemhi basin deposited on Paleoproterozoic basement with shoreline exposed on the east side of the map, (2) siliciclastic and carbonate strata of the Late Neoproterozoic-early Paleozoic miogeocline that were deposited in deeper environments to the west and interfingered with cratonal basin deposits to the east, and (3) generally coarse deposits in several nested, fault-bounded Eocene to Holocene basins. Syndepositional structural disruption including tilting and angular unconformities is present within strata and between stratigraphic packages formed during the different basin-filling events. Cretaceous, east-northeast-directed thrust faults inverted Mesoproterozoic and Neoproterozoic-Paleozoic basins and stacked strata from diverse stratigraphic packages and different depositional settings. The thrust plates rotated as they impinged on the Paleoproterozoic arch on the east side of the map, resulting in complex fault geometries that present as thrust faults to oblique reverse and tear (or ramp) fault along different fault segments. Cenozoic extension caused successive normal-fault basins of several orientations. Eocene volcanic rocks are preserved in fault-bounded depositional basins formed during the onset of Cenozoic extension. Eocene basins were obliquely overprinted by Oligocene-Miocene normal-fault basins. Holocene basins developed during steep normal faulting that formed the present Basin and Range topography. This geologic map of the central Beaverhead Mountains is mapped at 1:24,000 scale and printable at 1:50,000 scale. These data were collected between 1997 and 2017 and synthesized to provide significant new stratigraphic and structural data and interpretations.

Idaho, Montana↗
USGS2019

Geologic map of the Ferncliff and Louisa quadrangles, Louisa, Fluvanna, and Goochland Counties, Virginia

The area encompassed by the geologic map of the Ferncliff and Louisa, Va., 7.5-minute quadrangles includes the hypothetical surface projection of the Quail fault, which is the subsurface fault that was responsible for the 2011 magnitude 5.8 (M5.8) Mineral, Va., earthquake. The mapping shows that the Quail fault appears to have reactivated the Harris Creek fault, a Paleozoic fault that has been mapped and named in the study area and marks the boundary between the Ellisville pluton neck and Chopawamsic Formation. The Harris Creek fault was also reactivated in the early Mesozoic. Another result of the mapping is a well-defined, southwest to northeast, narrow zone of metagraywacke and ultramafic rocks (both part of the informal Shores complex) that marks the closure of a small ocean basin and the accretion of the 468- to 460-Ma (mega-annum) Ordovician Chopawamsic volcanic arc (part of the Carolina terrane) onto Laurentia. The accretion zone is truncated by the Ordovician-Silurian (444 Ma) Ellisville pluton; the 444-Ma age of the pluton therefore represents the minimum age of the accretion zone and indicates likely closure of the ocean basin during the Taconic orogeny. Across the map area, the metamorphic grade ranges from lower-greenschist facies in the northwest to amphibolite facies in the southeast. 40 Ar/ 39 Ar age-dating across this metamorphic gradient indicates that Taconic metamorphism was overprinted by late-Paleozoic Alleghanian metamorphism that was accompanied by refolding and faulting of Taconic structures. Quaternary terraces mapped along the South Anna River record a long history of incision and downcutting. A continuing question is how much of this downcutting was a result of neotectonic uplift in the central Virginia seismic zone. This report consists of a single geologic map sheet and an online geographic information systems database that includes bedrock geologic unit contacts and polygons, surficial geologic polygons, faults, and structural geologic information.

Virginia↗
USGS2020

Geologic map of Petroglyph National Monument and vicinity, Bernalillo County, New Mexico

This geologic map depicts and briefly describes geologic units underlying Petroglyph National Monument and immediately adjacent areas in Bernalillo County, New Mexico. The Monument is underlain dominantly by Quaternary basalts of the Albuquerque Volcanoes volcanic field, a series of basin-filling volcanic flows and associated vents from a monogenetic volcanic highland along the eastern margin of the Llano de Albuquerque. This compilation builds on data of previously published geologic maps and reports but includes new interpretive synthesis of volcanic stratigraphy and a unified representation of Quaternary surficial deposits overlying volcanic deposits within the Monument and areas immediately adjacent. This geologic map emphasizes the distribution of Quaternary volcanic vent areas and lava flow deposits which were incompletely mapped on previous publications. Surficial deposits are simplified, but uniformly mapped and described in contrast to varying map unit distributions, names and descriptions presented in the references above. Underlying deposits of the upper Santa Fe Group are exposed in the western part of the map area and described briefly. North-trending, syn- and post-eruption faulting is well preserved in the volcanic field and reflected in the subsurface models of aeromagnetic data. These faults are dominated by dip-slip displacement and are interpreted as extensional faults of the central Albuquerque Basin of the northern Rio Grande rift. Elongate distribution of vents for most of the volcanic deposits are spatially associated with the easternmost of these faults and are interpreted to reflect eruptions from fissures paralleling the regional extensional fault trends of the rift.

New Mexico↗
USGS2024

Geologic map and structure sections along the southern part of the Bartlett Springs Fault Zone and adjacent areas from Cache Creek to Lake Berryessa, northern Coast Ranges, California

Introduction Located in the Coast Ranges of northern California, the Bartlett Springs Fault Zone is the easternmost fault in the San Andreas Fault system in northern California. The fault is a right-lateral, strike-slip structure considered capable of producing an earthquake of moment magnitude 7. The purpose of this mapping is to better characterize the geology and earthquake hazards associated with the southern part of the Bartlett Springs Fault Zone and to help identify any evidence of active uplift on the faults bounding the Coast Ranges. Although the area immediately surrounding the Bartlett Springs Fault Zone is sparsely populated, its southern segment presents a potential seismic hazard to northern California communities as far away as the San Francisco Bay region and Sacramento. There are also nearby water resources, mineral resources, and public lands used for public recreation. The Coast Ranges of northern California are a series of northwest-southeast-oriented mountain ranges and valleys located north of the San Francisco Bay region, between the Pacific Ocean to the west and the Sacramento Valley to the east. The region has rugged terrain, high mountain peaks that reach more than 2,400 meters above sea level, isolated and narrow valley bottoms on which most human settlements are located, and large drainage systems that tend to follow the northwest-southeast-oriented topographic grain. The physiographic character of the region is shaped by its bedrock geology, deformational history, and active faulting. The basement rocks of the northern Coast Ranges consist of the Franciscan Complex and the Great Valley complex, the latter of which consists of two informal units, the Coast Range ophiolite and the Great Valley sequence. The Franciscan Complex and the Great Valley complex are in structural contact along the Coast Range Fault, a regional-scale structure and fundamental crustal boundary. The Franciscan Complex and the Great Valley complex are superposed by active, northwest-southeast-striking strike-slip faults that are associated with seismicity swarms. These active strike-slip faults can produce moderate to large earthquakes that have moment magnitudes of 7–8. In places, these active structures bound large ranges and valleys, suggesting that much of the modern topographic expression is the result of active deformation processes. This report contains new 1:24,000-scale geologic mapping along the southern part of the Bartlett Springs Fault Zone between Clear Lake and Lake Berryessa. The map area spans 738 square kilometers in northern Napa County, southern Lake County, and parts of Yolo and Colusa Counties. The south and east borders of the map are 90 kilometers north of San Francisco and 70 kilometers west of Sacramento, respectively. The map area is within the Knoxville mining district, which has a history of mercury and gold mining dating back to the mid-19th century. The two main towns in the region, Lower Lake and Clearlake, California, are west-northwest of the map area. Approximately 71,000 people live in the cities and rural communities located within a 40-kilometer radius of the center of the map area. The bedrock geology, cross sections, and structural data presented herein are critical for evaluating the long-term evolution of the Bartlett Springs Fault Zone. This work will supplement studies on local seismic hazards, liquefaction potential, landslide hazards, earthquake geology, natural resources, groundwater resources, engineering geology, and tectonic history by providing the background information for site-specific investigations on these subjects.

California↗
USGS2024

Bedrock geologic map of the Woodstock quadrangle, Grafton County, New Hampshire

The bedrock geology of the Woodstock 7.5-minute quadrangle consists of highly deformed metasedimentary rocks of the Central Maine trough, including the Silurian Rangeley and Perry Mountain Formations and the Devonian Littleton Formation. The central, northern, and eastern parts of the quadrangle are underlain by the oldest rocks in the area, the Rangeley Formation. In the southwest and south-central part of the quadrangle, metaturbidites of the Perry Mountain Formation and subsequent Littleton Formation overly the Rangeley Formation in a deformed F 1 synform, herein informally called the Bagley Brook basin. The metasedimentary rocks were intruded by widespread syn- to post-tectonic granitoids of the Devonian New Hampshire Plutonic Suite and minor post-metamorphic Jurassic-Cretaceous mafic dikes of the White Mountain Plutonic-Volcanic Suite. The metasedimentary rocks were affected by at least two episodes of deformation in the Devonian Acadian orogeny. The dominant regional foliation is second-generation (S 2 /D 2 ) and formed during the development of sillimanite-muscovite mineral assemblages. Large bodies of the Early Devonian Kinsman Granodiorite intruded the metasedimentary rocks semi-concordantly during D 2 deformation. Dikes of the Late Devonian Concord Granite cut the Kinsman Granodiorite and the metasedimentary rocks and were emplaced either syn- or post-D 2 . The map pattern in the Rangeley Formation is dominated by northeast to northwest trending, moderately to steeply north-dipping F 2 and F 3 folds. Map-scale F 1 folds are defined by the Bagley Brook basin. Previous division of Rangeley Formation stratigraphy in this region into “upper” and “lower” parts was not corroborated by 1:24,000-scale mapping of lithodemic units, and rocks previously mapped as part of the Smalls Falls and Madrid Formations are here reassigned to the Rangeley Formation. Some rocks previously mapped as the lower part of the Littleton Formation are now assigned to the Perry Mountain Formation. The Littleton Formation on this map is approximately equivalent to rocks previously mapped as the upper part of the same formation. Steeply dipping fractures in the quadrangle show a preferred northeast orientation, consistent with subsurface fracture orientations in the well fields near Mirror Lake. Jurassic-Cretaceous mafic dikes and normal faults show preferred northeast orientations, similar to the fractures, suggesting that the extensional stress field that controlled dike orientation during the Mesozoic also produced the dominant brittle fabrics in the area.

New Hampshire↗
USGS2025

Geologic map of the Guinevere Planitia quadrangle (V–30), Venus

This 1:5,000,000-scale geologic map of the Guinevere Planitia quadrangle divides the region into 15 geologic material units, defined using Magellan synthetic aperture radar (12.6-centimeter-wavelength radar system; 75 meters per pixel) datasets and including upland terrain units (2.4 percent of the surface area), plains materials units (59 percent), flow materials associated with named and unnamed eruptive centers (37.2 percent), small volcanic edifices, and impact crater materials (1.4 percent). Upland terrain units consist of tessera and lineated upland material, plains materials consist of Guinevere regional plains and Guinevere lineated and mottled plains, and flow materials consist of lobate flow material and plains-forming flow material. Specific lobate flows associated with Atanua Mons, Tuli Mons, Var Mons, and Uilata Fluctus are mapped separately. Other mapped units are impact crater material and small volcanic edifice. In addition to geologic units, we mapped linear features that show patterns of deformation or flow across the quadrangle. These consist of faults, wrinkle ridges, broad arches, channels, troughs, and flow direction indicators. The map region also contains several small volcanic features: shields, depressions, and craters. These, in combination with the plains, large volcanoes, and coronae, show the pervasive influence of volcanism across Venusian lowlands. The rims of nine identified impact features are delineated; large bright and dark haloes, which in some cases are associated with individual impact craters, are mapped as surficial mantling deposits. We documented spatial relationships using the stratigraphic and cross-cutting relationships of the quadrangle’s geologic units and features to provide a synthesis of the region’s geologic history. The upland terrain of the quadrangle indicates intense tectonic deformation and uplift. It is exposed as embayed remnants, typically within the plains, and represents the oldest geologic materials locally and across the region. Guinevere plains and the plains-forming flow unit appear to be assemblages of volcanic flows from multiple sources, including distinct coronae and corona-like structures. The temporal evolution of Guinevere lineated and mottled plains was likely protracted, with continued formation of small volcanic edifices over a long period. The morphologic and radar brightness characteristics of volcanoes in the region indicate their growth may have involved (1) multiple large-scale eruptive centers with recognizable spatial and temporal sequences, (2) extensive lava flow fields with a multitude of flows producing complex, overlapping patterns, and (3) numerous small volcanic edifices, including shields, domes, and cones. Although geologic patterns common to other regions of Venus are evident in the Guinevere Planitia quadrangle, local relative age relationships are inconsistent or unclear, preventing robust stratigraphic correlation. The mapping results do, however, indicate complicated local sequences of volcanic and tectonic activity.

Scientific Investigations Map↗
USGS1981

Increasing the availability of national mapping products.

A discussion of the means employed by the US Geological Survey to facilitate map usage, covering aspects of project Map Accessibility Program including special rolled and folded map packaging, new market testing, parks and campgrounds program, expanded map dealer program, new booklet-type State sales index and catalog and new USGS map reference code. The USGS is seen as the producer of a tremendous nation-wide inventory of topographic and related map products available in unprecedented types, formats and scales, and as endeavouring to increase access to its products. The new USGS map reference code is appended. -J.C.Stone

Information Bulletin, Western Association of Map L↗
USGS2026

Deep learning models for mapping surficial geology in selected physiographic regions of New York

Surficial geologic mapping is required for decisions including infrastructure and water-resource development and management. Deep learning, a type of machine learning that uses training data to self-learn and perform tasks, is explored as a tool to help increase efficiency of the labour- and time-intensive mapping process. Deep learning models were trained, and their potential to aid in mapping surficial geology was explored for two physiographic regions in New York: the high-relief Allegheny Plateau and the low-relief Erie-Ontario Lowlands. Key to the development of deep learning models is the availability of highly detailed surficial geologic maps in each of these regions from which the models can learn. Through exploring different groupings of surficial deposits and their corresponding spatial data, deep learning models were iteratively developed to reproduce published mapping for greater than 79% of the training areas, and with similar accuracy in test areas within the same physiographic region. These models were trained using only two inputs: high-resolution lidar data and previously published surficial geologic maps. This straightforward approach is intended to make the methods and models created easily reproducible using widely accessible datasets. This research describes the strengths and limitations of lidar-derived surficial geologic models and how broadly grouping surficial types, characteristics of different physiographic regions, and testing models in physiographic regions outside of their training areas affect model creation and performance. In addition, the models created could be used as a tool for mapping surficial geology in similar physiographic regions, in addition to establishing a framework for creating similar models elsewhere.

New York↗
USGS2015

Mapping extent and change in surface mines within the United States for 2001 to 2006

A complete, spatially explicit dataset illustrating the 21st century mining footprint for the conterminous United States does not exist. To address this need, we developed a semi-automated procedure to map the country's mining footprint (30-m pixel) and establish a baseline to monitor changes in mine extent over time. The process uses mine seed points derived from the U.S. Energy Information Administration (EIA), U.S. Geological Survey (USGS) Mineral Resources Data System (MRDS), and USGS National Land Cover Dataset (NLCD) and recodes patches of barren land that meet a “distance to seed” requirement and a patch area requirement before mapping a pixel as mining. Seed points derived from EIA coal points, an edited MRDS point file, and 1992 NLCD mine points were used in three separate efforts using different distance and patch area parameters for each. The three products were then merged to create a 2001 map of moderate-to-large mines in the United States, which was subsequently manually edited to reduce omission and commission errors. This process was replicated using NLCD 2006 barren pixels as a base layer to create a 2006 mine map and a 2001–2006 mine change map focusing on areas with surface mine expansion. In 2001, 8,324 km 2 of surface mines were mapped. The footprint increased to 9,181 km 2 in 2006, representing a 10·3% increase over 5 years. These methods exhibit merit as a timely approach to generate wall-to-wall, spatially explicit maps representing the recent extent of a wide range of surface mining activities across the country.

Land Degradation and Development↗
USGS2005

Vegetation mapping for change detection on an arid-zone river

A vegetation mapping system for change detection was tested at the Havasu National Wildlife Refuge (HNWR) on the Lower Colorado River. A low-cost, aerial photomosaic of the 4200 ha, study area was constructed utilizing an automated digital camera system, supplemented with oblique photographs to aid in determining species composition and plant heights. Ground-truth plots showed high accuracy in distinguishing native cottonwood ( Populus fremontii ) and willow ( Salix gooddingii ) trees from other vegetation on aerial photos. Marsh vegetation (mainly cattails, Typha domengensis ) was also easily identified. However, shrubby terrestrial vegetation, consisting of saltcedar ( Tamarix ramosissima ), arrowweed ( Pluchea sericea ), and mesquite trees ( Prosopis spp .), could not be accurately distinguished from each other and were combined into a single shrub layer on the final vegetation map. The final map took the form of a base, shrub and marsh layer, which was displayed as a Normalized Difference Vegetation Index map from a Landsat Enhanced Thematic Mapper (ETM+) image to show vegetation intensity. Native willow and cottonwood trees were digitized manually on the photomosaic and overlain on the shrub layer in a GIS. By contrast to present, qualitative mapping systems used on the Lower Colorado River, this mapping system provides quantitative information that can be used for accurate change detection. However, better methods to distinguish between saltcedar, mesquite, and arrowweed are needed to map the shrub layer.

Environmental Monitoring and Assessment↗