USGS Science⌕ Search

SEARCH · USGS Science

Results for “Geostandards and Geoanalytical Research”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

1,660 records · Page 46Linked to original sources
USGS1976

Ground magnetic and VLF studies at Midnite uranium mine, Stevens County, Washington

Ground magnetic and E-mode VLF measurements were made at more than 200 stations at the Midnite uranium Mine, Stevens County, Washington. The equipment was found to be light and foolproof, and each set of data was collected in one day, exclusive of surveying and marking the station points. The maps of contoured magnetic and VLF data resembled geologic maps of the area, showing many common features, as well as a few unique features on each map. Each showed some evidence of a small normal fault cutting the region; taken together, the evidence for this fault was judged to be much stronger, so that further structural details were inferred. Because of soil cover and inadequate outcrops, the presence of this fault had hitherto been unsuspected. A target area for further uranium mineralization north of the fault was indicated by this quick, inexpensive geophysical survey. The drilling program which Midnite Mine management had underway at that time had already outlined a mineralized zone in the indicated area.

Washington↗
USGS2023

Preliminary geologic map of the Southern Santa Rosa Mountains and Borrego Badlands, San Diego County, Southern California

This investigation delineates the geologic framework of an area of 75 square kilometers (km 2 ) located west of the Salton Sea in southern California (fig. 1, on sheet 1). The study area encompasses the south flank of the Santa Rosa Mountains and the eastern part of the Borrego Badlands (sheet 1). In this study area, regionally important stratigraphic and structural elements collectively inform the late Cenozoic geologic evolution of the Anza-Borrego sector of the Salton Trough province. Critical stratigraphic and structural elements in the map area include the following: The well exposed sequence of late Cenozoic, nonmarine sedimentary rocks that filled the Anza-Borrego subbasin (fig. 1) of the Salton Trough; A tectonic boundary that—in the southern Santa Rosa Mountains—separates the sedimentary strata from underlying crystalline rocks of Peninsular Ranges type. This tectonic boundary, named the West Salton Detachment Fault System by Axen and Fletcher (1998), is projected to underlie all late Cenozoic sedimentary strata in the Anza-Borrego subbasin of the Salton Trough; A variety of transpressional, transtensional, and strike-slip structures that have deformed the late Cenozoic sedimentary strata and collectively guided syntectonic and posttectonic depositional events within the Anza-Borrego subbasin of the Salton Trough; and The southeasternmost surface expression of the Clark Fault, a major strand of the dextral San Jacinto Fault Zone. Geologic mapping and analysis for this investigation focused on clarifying geologic relations among these four stratigraphic and structural aspects in the map area.

California↗
USGS2026

Reconstructing the Quaternary depositional history using geologic mapping and three-dimensional modeling of the subsurface near Fort Morgan, northeastern Colorado

Centered on Fort Morgan, Colorado, this study is intended to build from previous work by adding a three-dimensional (3D) view of the subsurface to better understand the depositional history of Quaternary deposits. A 1:100,000 scale geologic map was made by combining previous geologic maps, regional soil maps, and recent field investigations. In addition to the geologic mapping, drill hole lithologic data from water wells and oil and gas exploration were compiled and lithologic units simplified to best represent the stratigraphy of the Quaternary deposits. From these subsurface data, a 3D subsurface model was constructed, trimmed at the surface by a digital elevation model, and a bedrock surface foundation gridded from drill hole data was added. The surface of the 3D model was then compared visually to the surficial geologic map. Cross sections were constructed from the 3D model and compared to site-specific drilling that was done as part of this project. Finally, the model was examined in detail to reconstruct the depositional history of the subsurface alluvial and eolian units. Alluvial and fluvial drainage basins exposed in the subsurface have a greater areal extent than the present-day narrow drainages. Older eolian sand in the subsurface tends to be interbedded with loess indicating coeval deposition. Holocene sand, both eroded from bedrock exposed at the surface north of the study area and reworked from the South Platte River, buries most of the interbedded older sand and loess.

Colorado↗
USGS2025

Seismic moment and local magnitude scales in Ridgecrest, CA from the SCEC/USGS Community Stress Drop Validation Study

We illustrate the systematic difference between moment magnitude and local magnitude caused by underlying earthquake source physics, using seismic moments submitted to the Statewide California Earthquake Center/United States Geological Survey Community Stress Drop Validation Study 2019 Ridgecrest data set. While the relationship between seismic moment and moment magnitude ( M or M w ) of log 10 ( M 0 ) ~ 1.5* M is uniformly valid for all earthquake sizes by definition (Hanks and Kanamori, 1979), the relationship between local magnitude M L and moment is itself magnitude dependent. For moderate events, ~3< M < ~6, M and M L are coincident; for earthquakes smaller than ~3, M L ~ 1.0 log 10 M 0 (Hanks and Boore, 1984). This is a physical consequence of the corner frequency fc becoming larger than the upper frequency of observation and implies that M L and M differ systematically by a factor of 1.5 for these small events. While this idea is not new, we propose a new, continuous relationship between local magnitude and moment, for magnitudes 2 to 6 which extrapolates to smaller and larger magnitudes, applicable to southern California specific to the Ridgecrest region. We make use of the plethora of seismic moments as submitted by many participants of the Community Stress Drop study, compared to the Southern California Seismic Network (SCSN) catalog magnitudes. Overall, the seismic moments in the Community Study recover moment magnitude well, so we use our new M L - M 0 to convert M L to M , refining the SCSN operational M Lr scale. This systematic difference of 50% in slope between local and moment magnitude at small magnitudes has implications for spectral stress drop estimates, earthquake ground motion modeling, as well as other magnitude scales and earthquake occurrence statistics.

California↗
USGS2026

Patterns and drivers of cliff erosion in Big Sur, California, USA using repeat photogrammetry, 2017–2023

Seacliff erosion in steep terrain poses major risks to transportation and critical infrastructure. In Big Sur, California, USA, seacliff erosion threatens the sustainability of the central coast stretch of California State Route 1, a transportation corridor that is critical to the region's economy. Published cliff retreat rates for the region range from 1 to 40 cm yr −1 , highlighting that high-resolution, process-based studies could enhance understanding of the causes of spatial and temporal variability. We quantified cliff erosion and investigated its drivers along ∼13 km of the Big Sur coastline at week–month timescales during the late fall to early spring wet seasons between January 2017 and June 2023 by analyzing 3D point clouds developed from aerial imagery using four-dimensional structure-from-motion (4D SfM) photogrammetry techniques. We calculated cliff face retreat rates of 2.23 ± 3.06 cm yr −1 (mean ±1 σ ), an order of magnitude lower than long-term estimated rates for the region (which included large deep-seated landslides), but in line with short-term rates reported across California. Change detection imagery comparison, cliff profiles through time, and statistical analysis reveal a cyclical cliff evolution process in which erosion by wave action at the cliff base destabilizes the cliff and primes it for subsequent failure during precipitation events. Although more erosion by volume could be attributed to precipitation-induced increases in soil moisture (784 m 3 km −1 yr −1 ) compared with erosion attributed to wave power (282 m 3 km −1 yr −1 ), our observations underscore the coupled nature of these processes in driving cliff evolution, consistent with established theory and observations.

California↗
USGS2026

Ground-motion aleatory-variability models for Puerto Rico and the U.S. Virgin Islands

I develop independent logic trees for aleatory variability for crustal and subduction-zone (interface and intraslab) earthquakes for seismic hazards analyses in Puerto Rico and the U.S. Virgin Islands (PRVI) from existing suites of ground-motion models (GMMs) and from ground-motion datasets, including a regional PRVI dataset. The aleatory variability models are parameterized using a partially nonergodic partitioning of standard deviation that consists of independently developed between-event ( ), site-to-site ( ), and event-corrected single-station ( ) standard deviation components. The effects of nonlinear site response on aleatory variability are incorporated through additional terms that modify the standard deviation components. Because one goal of this work is to develop independent logic trees for aleatory variability that synthesize the aleatory variability models from GMMs, I make use of the functional forms of the input GMMs. The PRVI dataset contains a limited number of stations with high-quality site metadata and does not contain records from earthquakes with magnitudes greater than 6.1, so I choose not to develop the aleatory variability models from the regional dataset alone. Instead, the standard deviation components from regional ground-motion data are evaluated against the components derived from GMMs and from available global datasets, and regionalized standard deviation components are incorporated where there is evidence that regional effects exhibit substantial differences. The resulting logic trees for aleatory variability consist of models of and that are consistent with semiempirical GMMs for active crustal and subduction-zone regimes, and two alternative models of , including one model that exhibits site-to-site variability informed by PRVI data, with values that exceed global models. The aleatory variability models may be considered in future hazards assessments in PRVI to simplify the hazard calculations, to incorporate regional ground-motion variability effects, and to enable direct logic-tree weighs of aleatory variability.

Puerto Rico, U.S. Virgin Islands↗
USGS2024

The EnMAP spaceborne imaging spectroscopy mission: Initial scientific results two years after launch

Imaging spectroscopy has been a recognized and established remote sensing technology since the 1980s, mainly using airborne and field-based platforms to identify and quantify key bio- and geo-chemical surface and atmospheric compounds, based on characteristic spectral reflectance features in the visible-near infrared (VNIR) and short-wave infrared (SWIR). Spaceborne missions, a leap in technology, were sparse, starting with the CHRIS/PROBA and EO1/Hyperion missions in the early 2000s, and providing spectroscopy data with limited spectral coverage and/or low data quality in the SWIR. Since 2019, several countries and agencies have successfully launched a number of spaceborne imaging spectroscopy systems into orbit or deployed them on the International Space Station (ISS) such as DESIS, PRISMA, HISUI, GF-5, EnMAP and EMIT. Among these recent missions, the German Environmental Mapping and Analysis Program (EnMAP) stands for its long-term development, sophisticated design with on-board calibration, high data quality requirements, and extensive accompanying science program. EnMAP was launched in April 2022 and, following a successful commissioning phase, started its operational activities in November 2022. The EnMAP mission encompasses global coverage from 80° N to 80° S through on-demand data acquisitions. Data are free and open access with 30 m spatial resolution, a high spectral resolution with a spectral sampling distance of 6.5 nm and 10 nm in the VNIR and SWIR regions respectively, and a high signal-to-noise ratio. In this paper, we aim to present the mission's current status, coverage, science capabilities and performance two years after launch. We show the potential of EnMAP for space-based imaging spectroscopy to operate in various environments, including high and low light levels, dense forests, Antarctic glaciers, and arid agricultural areas. EnMAP enables various applications in fields such as agriculture and forestry, soil compositional, raw materials, and methane mapping, as well as water quality assessment, and snow and ice properties. The results show that EnMAP's performance exceeds the mission requirements, and highlights the significant potential for contribution to scientific exploitation in various geo- and biochemical sciences. EnMAP is also expected to serve as a key tool for the development and testing of data processing algorithms for upcoming global operational missions.

Remote Sensing of Environment↗
USGS2024

The 3D Elevation Program—Supporting New Hampshire’s economy

Introduction The topography of New Hampshire ranges from the Coastal Lowlands to the Eastern New England Upland to the White Mountains region. High-quality statewide elevation data are useful in managing this very diverse landscape. For example, the short coastline, including the Great Bay estuary and the Hampton-Seabrook marshes, is of disproportionately high value to New Hampshire’s tourist economy. The vulnerability of the coast to the effects of sea-level rise underscores the need for accurate, high-quality nearshore topographic elevation data and offshore bathymetric data to effectively manage the coast’s valuable resources, which include important fisheries, habitat, and infrastructure. Another important use for accurate elevation data in New Hampshire is in the evaluation of flood hazards and their potential environmental and infrastructure effects. This evaluation includes mapping of inundation and sediment transport, and assessing the associated costs of flooding. Addressing this challenge requires detailed knowledge of both surface topography and inland bathymetry. Other important activities having a substantial economic element and needing accurate elevation data include geologic resource assessment and hazard mitigation, urban and regional planning, infrastructure and construction management, and cultural resources preservation and management. Critical applications that meet the State’s management needs depend on light detection and ranging (lidar) data that provide a highly detailed three-dimensional model of the Earth’s surface and aboveground features.

New Hampshire↗
USGS2024

Federal lands greenhouse gas emissions and sequestration in the United States: Estimates for 2005–22

In 2016, the Secretary of the U.S. Department of the Interior requested that the U.S. Geological Survey (USGS) produce a publicly available and annually updated database of estimated greenhouse gas emissions associated with the extraction and use of fossil fuels from Federal lands. The first report in this series included emissions estimates from 2005 to 2014 and were reported for 29 States and two offshore areas. Native American and Tribal lands were not included in that analysis. This report recalculates those previous years (2005–14) with updated data and methods and extends the estimates to 2022. Nationwide emissions from fossil fuels produced on Federal lands in 2022 were 1,081.2 million metric tons of carbon dioxide equivalent (MMT CO 2 Eq.) for CO 2 , 33.4 MMT CO 2 Eq. for methane (CH 4 ), and 4.3 MMT CO 2 Eq. for nitrous oxide (N 2 O). Compared to 2005, the 2022 totals represent decreases in emissions for all three greenhouse gases (by 17 percent for CO 2 , 37 percent for CH 4 , and 30 percent for N 2 O). Emissions from fossil fuels produced on Federal lands represent, on average, 21.8 percent of U.S. emissions for CO 2 , 6.1 percent for CH 4 , and 1.3 percent for N 2 O over the 18 years included in this estimate. The trends and relative magnitudes of the greenhouse gas emissions estimated are roughly parallel to the Federal lands fossil fuel production volumes. In 2021, Federal lands of the conterminous United States stored 70,424 MMT CO 2 Eq. in terrestrial ecosystems. Soils stored most of the terrestrial ecosystem carbon (66 percent), followed by live vegetation (25 percent), deadwood (5 percent), and litter (4 percent). Carbon sequestration on Federal lands was highly variable over time, owing primarily to interannual variability in climate and weather, and variability in land use and land cover (LULC) change and disturbances, among these are wildfires and logging. Between 2005 and 2021, Federal lands sequestered an average of 83 MMT CO 2 Eq./yr. By subtracting the cumulative effects of LULC and disturbance-related CO 2 losses to the atmosphere from the total, we estimate that ecosystems at the national level sequestered CO 2 at an annual mean rate of 17 MMT CO 2 Eq./yr in a term called the net ecosystem exchange (NEE). This annual NEE sequestration value represents about 1.4 percent of average fossil fuel emissions over the same period. The USGS estimates presented in this report represent an accounting for the emissions resulting from fossil fuel extraction on Federal lands and the end-use combustion of those fuels, as well as for the sequestration of carbon in terrestrial ecosystems on Federal lands. A combined net CO 2 emissions estimate, which is the difference between the emitted and sequestered CO 2 from both the fossil fuel and ecosystems estimates, provides context for evaluating the greenhouse gas contributions of activities on these lands. The estimates included in this report can provide context for future energy decisions, as well as a basis to track change in the future.

Scientific Investigations Report↗
USGS2024

Preparing for today's and tomorrow's water-resources challenges in eastern Long Island, New York

Freshwater is a vital natural resource. Although New York is a water-rich State, the wise and economical use of water resources is needed to ensure that there is enough water of adequate quality for both human and ecological needs—both for today and for tomorrow. Nowhere in New York is this more evident than in Nassau and Suffolk Counties on Long Island, where the public water supply is obtained from the sole-source aquifers located directly beneath the nearly 3 million people who live there. In 2023, in eastern Long Island’s Suffolk County, groundwater was pumped from these aquifers by more than 1,100 public water-supply wells to meet the needs of about 1.5 million people.

New York↗
USGS2025

High-precision earthquake catalog for Minto Flats fault zone, central Alaska, reveals complex and conjugate faulting

The Minto Flats fault zone (MFFZ) in central Alaska is a left‐lateral strike‐slip fault system situated between the continental‐scale right‐lateral Denali and Kaltag‐Tintina faults. The MFFZ has the potential to generate magnitude 7 earthquakes, and it hosted a magnitude 6 earthquake in 1995. It has also produced exotic events, such as very‐low‐frequency earthquakes and nucleation signals. We use network‐matched filtering and relative earthquake relocation techniques to derive a detailed catalog of earthquake locations for the MFFZ. The catalog spans from August 2014 to December 2019, a time period including 13 temporary seismic stations in the region. Our results provide the most complete catalog for the MFFZ and include deeper events, clusters of shallow seismicity, and a complex and segmented fault structure not observed in the original regional catalog. We document right‐lateral strike‐slip faulting, conjugate to the main northeast‐striking left‐lateral faults of the MFFZ. Below Nenana basin, the relocated seismicity reveals northwest‐dipping left‐lateral faults, supporting the inference that deep crustal active faulting is associated with recent basin deformation.

Alaska↗
USGS2026

Geothermal district energy systems coupled with seasonal underground thermal energy storage: A U.S. techno-economic screening by climate and geology

In the United States, cooling-dominated commercial building loads can cause geothermal heat pump-based district energy systems to accumulate a long-term subsurface thermal imbalance, motivating the incorporation of seasonal underground thermal energy storage. We developed a transferable workflow to evaluate geothermal district systems that pair ground heat exchangers with seasonal underground thermal energy storage. Using standardized hourly loads for seven commercial buildings and a uniform cost framework, we simulated ten U.S. cities with a physics-based ground heat exchanger model, subsurface storage simulations, and economic assessment to isolate the roles of climate and hydrogeology. In cooling-dominated cities, underground thermal energy storage supplied the majority of annual cooling, cutting electricity use and summer peaks substantially while achieving levelized costs comparable to or below conventional chiller-boiler plants. In cooler climates, the storage share shrunk, required borefield size and costs rose, and levelized cost of energy increased nearly linearly with declining underground thermal energy storage fraction, indicating storage fraction as the primary economic lever. Sensitivity analysis showed capital risk dominated by borefield drilling and surface heating, ventilation, and air-conditioning and piping, with underground thermal energy storage costs secondary. This workflow provides a transparent foundation for site-specific design and screening of next-generation geothermal district energy systems.

Arizona, Illinois, Maryland, Michigan, Mississippi↗
USGS2025

Tapwater exposures, residential risk, and mitigation in a PFAS-impacted-groundwater community

Tapwater (TW) safety and sustainability are priorities in the United States. Per/polyfluoroalkyl substance(s) (PFAS) contamination is a growing public-health concern due to prolific use, widespread TW exposures, and mounting human-health concerns. Historically-rural, actively-urbanizing communities that rely on surficial-aquifer private wells incur elevated risks of unrecognized TW exposures, including PFAS, due to limited private-well monitoring and contaminant-source proliferation in urbanizing landscapes. Here, a broad-analytical-scope TW-assessment was conducted in a hydrologically-vulnerable, Mississippi River alluvial-island community, where PFAS contamination of the shallow-alluvial drinking-water aquifer has been documented, but more comprehensive contaminant characterization to inform decision-making is currently lacking. In 2021, we analyzed 510 organics, 34 inorganics, and 3 microbial groups in 11 residential and community locations to assess (1) TW risks beyond recognized PFAS issues, (2) day-to-day and year-to-year risk variability, and (3) suitability of the underlying sandstone aquifer as an alternative source to mitigate TW-PFAS exposures. Seventy-six organics and 25 inorganics were detected. Potential human-health risks of detected TW exposures were explored based on cumulative benchmark-based toxicity quotients ( ∑ TQ ). Elevated risks ( ∑ TQ ≥ 1) from organic and inorganic contaminants were observed in all alluvial-aquifer-sourced synoptic samples but not in sandstone-aquifer-sourced samples. Repeated sampling at 3 sites over 52–55 h indicated limited variability in risk over the short-term. Comparable PFAS-specific ∑ TQ for spatial-synoptic, short-term (3 days) temporal, and long-term (3 years quarterly) temporal samples indicated that synoptic results provided useful insight into the risks of TW-PFAS exposures at French Island over the long-term. No PFAS detections in sandstone-aquifer-sourced samples over a 3 year period indicated no PFAS-associated risk and supported the sandstone aquifer as an alternative drinking-water source to mitigate community TW-PFAS exposures. This study illustrated the importance of expanded contaminant monitoring of private-well TW, beyond known concerns (in this case, PFAS), to reduce the risks of a range of unrecognized contaminant exposures.

Wisconsin↗
USGS2025

Geologic map of MTM −15032 and −20032 quadrangles, western Ladon basin, Mars

Our mapping efforts focused on the geomorphic terrains and geologic units contained within Mars Transverse Mercator (MTM) −15032 and −20032 quadrangles. These two quadrangles are located along the west side of Ladon basin and span lat −12.5° N. to −22.5° N. and long 325° E. to 330° E. The western part of Ladon basin and its bounding basin ring structures to the west preserved features that help to understand the long history of drainage across the Margaritifer Terra region of Mars. Our geologic map provides new insight into the extent of aqueous activity across western Ladon basin and the adjoining highlands, which includes the northern part of Ladon Valles, Arda Valles, numerous small valleys in the western highlands, and light-toned layered deposits associated with these fluvial features. The Mars Odyssey Thermal Emission Imaging System (THEMIS) infrared (IR) daytime mosaic (100 meters per pixel) was used as the primary base map. We constructed the geologic map of western Ladon basin at 1:1,000,000 scale. We identified 20 geologic units in the map area, which we divided into the following groups: crater units; volcanic units; chaotic units; basin fill units; crater, valley, and channel units; and plateau and highlands units. We observed the following sequence of events: (1) formation of Ladon and Holden impact basins in the middle Noachian, producing a mountainous unit; (2) landscape degradation and infilling during the Late Noachian to Late Hesperian forming terra units; (3) formation of Ladon Valles in the Late Noachian to Early Hesperian by catastrophic flooding, producing channel units; (4) accumulation of sediments in the Late Noachian to Early Amazonian, forming basin fill units; (5) formation of a smooth crater fill unit during the Early to Late Hesperian; (6) deposition during the Late Hesperian to Early Amazonian, creating light-toned layered units within Ladon Valles, Ladon basin, and other smaller valley networks along the western uplands, as well as formation of a light-toned unit along some crater floors; (7) formation a of chaotic unit in the Early to Middle Amazonian, formation of alluvial fans in the Early Amazonian, and eruption of a volcanic unit in the Middle Amazonian; and (8) formation of craters throughout the geologic history of the map region.

Scientific Investigations Map↗
USGS2026

Extreme precipitation variability and soil texture controls on water-table response

Extreme precipitation events (EPEs), a key class of hydrometeorological extremes, are intensifying globally under climate change; however, their effects on water-table dynamics across varying soil textures remain poorly understood. To better understand the impacts of EPEs, we conducted one-dimensional modeling to evaluate water-table response time, displacement, recession time, and total recharge under EPEs of 0.20 m, 0.40 m, and 0.60 m amounts, applied over 1-, 7-, and 20-day durations across twelve soil textures. The results show that coarse soils (i.e., sand) respond within days, while fine soils (i.e., clay) may take over 200 days. Water-table displacement ranged from 0.30 to 1.64 m and increased with EPE magnitude. The time it took for water tables to recede ranged from 1.2 to 3.0 years. A first-order estimate of total possible recharge, calculated from porosity and displacement, ranged from 17% (clay) to 97% (sand), averaging ~63% across soil textures. These findings highlight that recharge is primarily governed by EPE magnitude and soil properties, not event duration. This modeling effort provides new insight into how soil texture modulates groundwater response to extreme precipitation, informing future water budget and resilience assessments.

Water↗
USGS2025

Integrated stratigraphic and geochemical analysis of organic-rich intervals of the Lewis Shale in the eastern Washakie Basin, Wyoming

Geological studies in the Cretaceous Western Interior Seaway (KWIS) in North America reveal highly variable sedimentological conditions on its western shore caused by rapidly changing sea level and detrital input during the seaway’s closure. Here we examine a 601-foot (183 meters) continuous core through the lower part of the Maastrichtian Lewis Shale in the eastern Washakie Basin, Wyoming, through integrating stratigraphic and geochemical analyses to better understand organic matter deposition and preservation during the final marine transgression within the seaway. The core penetrates eight organic-rich flooding intervals (F1-F8) and a regional condensed section, informally known as the Asquith marker. The lower portions of the core record sediment input from a southern source, likely the Sierra Madre/Park Ranges, while the upper part records sediment input from a northern source, likely the Granite Mountains. This provenance transition is supported by regional stratigraphic analysis and changes in bulk mineral and trace metal composition. The Asquith marker and early flooding surfaces are enriched in oil-prone, marine organic matter deposited under dysoxic to euxinic conditions, whereas younger flooding surfaces show increased terrigenous input and poorer preservation conditions. The Asquith marker is identified as a prime oil-prone source rock. Although younger flooding surfaces also exhibit favorable source-rock properties, their generative potential is reduced due to increased clastic and terrigenous organic matter deposition caused by regression. These results emphasize the importance of sediment source variability, organic matter preservation, and changing redox conditions to provide insight into the sediment provenance and petroleum potential of the Lewis Shale in the context of the final transgression within the KWIS.

Colorado, Wyoming↗
USGS2024

Flood-inundation maps for the Cuyahoga River in and near Independence, Ohio, 2024

Digital flood-inundation maps for a 9.9-mile reach of the Cuyahoga River in and near Independence, Ohio, were created by the U.S. Geological Survey (USGS) in cooperation with the Northeast Ohio Regional Sewer District Board of Trustees. Water-surface profiles were computed for the stream reach by using a one-dimensional steady-state step-backwater model. The model was calibrated to the current (2024) stage-streamflow relation (rating curve 43.0) for the USGS streamgage 04208000, Cuyahoga River at Independence, Ohio. The resulting hydraulic model was then used to compute 13 water-surface profiles for water levels (flood stages) ranging from 14.00 to 26.00 feet. The flood stages range from “action stage” to above “major flood stage” as reported by the National Weather Service. The simulated water-surface profiles were then used in combination with a digital elevation model derived from light detection and ranging data to map the inundated areas associated with each flood profile. The flood-inundation maps and the supporting hydraulic model produced by this study can be used by emergency managers and local officials to assess flood mitigation strategies and to define flood hazard areas to protect life and property, to coordinate flood response activities such as evacuations and road closures, and to aid postflood recovery efforts.

Ohio↗