USGS Science⌕ Search

SEARCH · USGS Science

Results for “Open File”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 811 records · Page 45Linked to original sources

Records of wells and chemical analyses of ground water in Deuel and Hamlin counties, South Dakota

Well and chemical groundwater data contained in three tables were collected during a 5-year study started in 1971 to determine the geology and water resources of Deuel and Hamlin Counties, South Dakota. Physical, hydrologic, and geologic data for 3,228 wells and test holes have been entered into computer storage in the Ground-Water Site Inventory File of the U.S. Geological Survey 's National Water Data Storage and Retrieval System (WATSTORE). The well tables in the report are computer printouts from WATSTORE. Water quality data from 564 chemical analyses have been stored in the Water-Quality File of WATSTORE and is computer printed in the chemical analyses table by aquifer. (USGS)

Open-File Report↗

Isostatic gravity map and principal facts for 694 gravity stations in Yellowstone National Park and vicinity, Wyoming, Montana, and Idaho

The report presents the principal facts for gravity stations compiled for Yellowstone National Park and vicinity. The gravity data were compiled from three sources: Defense Mapping Agency, University of Utah, and U.S. Geological Survey. Part A of the report is a paper copy describing how the compilation was done and presenting the data in tabular format as well as a map; part B is a 5-1/4 inch floppy diskette containing only the data files in ASCII format. Requirements for part B: IBM PC or compatible, DOS v. 2.0 or higher. Files contained on this diskette: DOD.ISO -- File containing the principal facts of the 514 gravity stations obtained from the Defense Mapping Agency. The data are in Plouff format* (see file PFTAB.TEX). UTAH.ISO -- File containing the principal facts of 153 gravity stations obtained from the University of Utah. Data are in Plouff format. USGS.ISO -- File containing the principal facts of 27 gravity stations collected by the U.S. Geological Survey in July 1987. Data are in Plouff format. PFTAB.TXT -- File containing explanation of principal fact format. ACC.TXT -- File containing explanation of accuracy codes.

Open-File Report↗

Geologic and hydrogeologic information for a geodatabase for the Brazos River Alluvium Aquifer, Bosque County to Fort Bend County, Texas

During July-October 2006, the U.S. Geological Survey (USGS), in cooperation with the Texas Water Development Board (TWDB), developed geologic and hydrogeologic information for a geodatabase for use in development of a Groundwater Availability Model (GAM) of the Brazos River alluvium aquifer along the Brazos River from Bosque County to Fort Bend County, Texas. The report provides geologic and hydrogeologic information for a study area that encompasses the Brazos River alluvium aquifer, a 1/2-mile-wide lateral buffer surrounding the aquifer, and the rocks immediately underlying the aquifer. The geodatabase involves use of a thematic approach to create layers of feature data using a geographic information system. Feature classes represent the various types of data that are keyed to spatial location and related to one another within the geodatabase. The 1/2-mile-wide buffer surrounding the aquifer was applied to include data from wells constructed primarily in alluvium but outside the boundary of the Brazos River alluvium aquifer. A 1/2- by 1/2-mile grid was generated on the study area to facilitate uniform distribution of data for eventual input into the GAM. Data were compiled primarily from drillers and borehole geophysical logs from government agencies and universities, hydrogeologic sections and maps from published reports, and agency files. The geodatabase contains 450 points with geologic data and 280 points with hydrogeologic data.

Open-File Report↗

Preliminary surficial geologic map of the Newberry Springs 30' x 60' quadrangle, California

The Newberry Springs 30' x 60' quadrangle is located in the central Mojave Desert of southern California. It is split approximately into northern and southern halves by I-40, with the city of Barstow at its western edge and the town of Ludlow near its eastern edge. The map area spans lat 34°30 to 35° N. to long -116 °to -117° W. and covers over 1,000 km 2 . We integrate the results of surficial geologic mapping conducted during 2002-2005 with compilations of previous surficial mapping and bedrock geologic mapping. Quaternary units are subdivided in detail on the map to distinguish variations in age, process of formation, pedogenesis, lithology, and spatial interdependency, whereas pre-Quaternary bedrock units are grouped into generalized assemblages that emphasize their attributes as hillslope-forming materials and sources of parent material for the Quaternary units. The spatial information in this publication is presented in two forms: a spatial database and a geologic map. The geologic map is a view (the display of an extracted subset of the database at a given time) of the spatial database; it highlights key aspects of the database and necessarily does not show all of the data contained therein. The database contains detailed information about Quaternary geologic unit composition, authorship, and notes regarding geologic units, faults, contacts, and local vegetation. The amount of information contained in the database is too large to show on a single map, so a restricted subset of the information was chosen to summarize the overall nature of the geology. Refer to the database for additional information. Accompanying the spatial data are the map documentation and spatial metadata. The map documentation (this document) describes the geologic setting and history of the Newberry Springs map sheet, summarizes the age and physical character of each map unit, and describes principal faults and folds. The Federal Geographic Data Committee (FGDC) compliant metadata provides detailed information about the digital files and file structure of the spatial data.

California↗

Selected test-well data from the MX-missile siting study, Tooele, Juab, Millard, Beaver, and Iron Counties, Utah

This report contains well data collected from 1979 to 1983 in a part of the Great Basin in western Utah (fig. 1). The area is characterized by a series of generally north-trending mountain ranges separated by alluviumfilled basins that are partially filled with sedimentary deposits eroded from the adjacent mountains and lacustrine sediments deposited by Lake Bonneville. Most of the intermountain basins are elongated in the northward direction, but some are almost equidimensional. This report was prepared as part of the Great Basin Regional AquiferSystem Analysis (RASA) program. The report is intended to make well data from the MX-missile siting study readily available to water-resource managers and the general public. It includes well data obtained in areas for which little or no such data have been published previously. Well-drilling and well-completion data were compiled by Ertec, Inc. (formerly Fugro National, Inc.) under contract with the U. S. Air Force. Those data along with aquifer test data, geophysical logs, and drillers1 or geologists1 logs were obtained from Ertec, Inc. under an agreement with the U.S. Air Force. The authors thank the officials of both Ertec, Inc. and the U.S. Air Force for their helpful cooperation. The U.S. Geological Survey obtained accurate locations of the test wells (pi. 1) and accurate water-level measurements in those wells (table 1). Chemical analyses of water samples collected from several of the test wells drilled in the Sevier Desert have been published in a report by Enright and Holmes (1982, table 5). Test drilling for the MX-missile siting study consisted of two parts, the verification phase and the water-resources phase. The verification jhase was designed to obtain information necessary for the design and construction of the MX-basing system. Numerous small diameter wells were bored with depths ranging from 92 to 205 feet. Two-inch diameter JVC casing with the bottom 20 feet perforated was installed in each borehole. The water-resources phase was designed to determine ground-water availibility and to estimate the effects of ground-water withdrawals required for the construction of the MX-basing system. Six large-diameter production test wells were drilled along with associated small-diameter observation wells. Depths ranged from 310 to 1,399 feet. Lithologic logs for selected production test wells or associated observation wells are listed in table 2. Geophysical logs and aquifer test data are available in the files of the U. S. Geological Survey, as indicated in table 1.

Utah↗

Analytically-derived sensitivities in one-dimensional models of solute transport in porous media

Analytically-derived sensitivities are presented for parameters in one-dimensional models of solute transport in porous media. Sensitivities were derived by direct differentiation of closed form solutions for each of the odel, and by a time integral method for two of the models. Models are based on the advection-dispersion equation and include adsorption and first-order chemical decay. Boundary conditions considered are: a constant step input of solute, constant flux input of solute, and exponentially decaying input of solute at the upstream boundary. A zero flux is assumed at the downstream boundary. Initial conditions include a constant and spatially varying distribution of solute. One model simulates the mixing of solute in an observation well from individual layers in a multilayer aquifer system. Computer programs produce output files compatible with graphics software in which sensitivities are plotted as a function of either time or space. (USGS)

Open-File Report↗

Whole-rock and glass major-element geochemistry of Kilauea Volcano, Hawaii, near-vent eruptive products: September 1994 through September 2001

This report presents major-element geochemical data for glasses and whole-rock aliquots among 523 lava samples collected near the vent on Kilauea's east rift zone between September 1994 and October 2001. Information on sample collection, analysis techniques and analytical standard reproducibility are presented as a PDF file, which also includes a detailed explantion of the categories of sample information presented in the database spreadsheet. The sample database is downloadable as a separate Microsoft Excel file.

Hawai'i↗

MODFLOW-2000 ground-water model-user guide to the Subsidence and Aquifer-System Compaction (SUB) Package

This report documents a computer program, the Subsidence and Aquifer-System Compaction (SUB) Package, to simulate aquifer-system compaction and land subsidence using the U.S. Geological Survey modular finite-difference ground-water flow model, MODFLOW-2000. The SUB Package simulates elastic (recoverable) compaction and expansion, and inelastic (permanent) compaction of compressible fine-grained beds (interbeds) within the aquifers. The deformation of the interbeds is caused by head or pore-pressure changes, and thus by changes in effective stress, within the interbeds. If the stress is less than the preconsolidation stress of the sediments, the deformation is elastic; if the stress is greater than the preconsolidation stress, the deformation is inelastic. The propagation of head changes within the interbeds is defined by a transient, one-dimensional (vertical) diffusion equation. This equation accounts for delayed release of water from storage or uptake of water into storage in the interbeds. Properties that control the timing of the storage changes are vertical hydraulic diffusivity and interbed thickness. The SUB Package supersedes the Interbed Storage Package (IBS1) for MODFLOW, which assumes that water is released from or taken into storage with changes in head in the aquifer within a single model time step and, therefore, can be reasonably used to simulate only thin interbeds. The SUB Package relaxes this assumption and can be used to simulate time-dependent drainage and compaction of thick interbeds and confining units. The time-dependent drainage can be turned off, in which case the SUB Package gives results identical to those from IBS1. Three sample problems illustrate the usefulness of the SUB Package. One sample problem verifies that the package works correctly. This sample problem simulates the drainage of a thick interbed in response to a step change in head in the adjacent aquifer and closely matches the analytical solution. A second sample problem illustrates the effects of seasonally varying discharge and recharge to an aquifer system with a thick interbed. A third sample problem simulates a multilayered regional ground-water basin. Model input files for the third sample problem are included in the appendix.

Open-File Report↗

Modeling of depth to base of Last Glacial Maximum and seafloor sediment thickness for the California State Waters Map Series, eastern Santa Barbara Channel, California

Models of the depth to the base of Last Glacial Maximum and sediment thickness over the base of Last Glacial Maximum for the eastern Santa Barbara Channel are a key part of the maps of shallow subsurface geology and structure for offshore Refugio to Hueneme Canyon, California, in the California State Waters Map Series. A satisfactory interpolation of the two datasets that accounted for regional geologic structure was developed using geographic information systems modeling and graphics software tools. Regional sediment volumes were determined from the model. Source data files suitable for geographic information systems mapping applications are provided.

California↗

Measured sections of Ordovician strata in northeast Kentucky

The sections described in this report are part of the data used in studies of the Upper Ordovician rocks of Kentucky. The studies were part of a geologic mapping program by the U. S. Geological Survey in cooperation with the Kentucky Geological Survey. Formations of Late Ordovician age described in this report are the Drakes, Bull Fork, Grant Lake, Fairview, and Kope. Most sections were measured in the field with Jacob staff and tape. Color names with numbers are based on comparison with the rock chart by Goddard and others (1948). The core described is on file at the core library of the Kentucky Geological Survey in Lexington, Kentucky.

Kentucky↗

Users guide for the Water Resources Division bibliographic retrieval and report generation system

The WRDBIB Retrieval and Report-generation system has been developed by applying Multitrieve (CSD 1980, Reston) software to bibliographic data files. The WRDBIB data base includes some 9 ,000 records containing bibliographic citations and descriptors of WRD reports released for publication during 1968-1982. The data base is resident in the Reston Multics computer and may be accessed by registered Multics users in the field. The WRDBIB Users Guide provides detailed procedures on how to run retrieval programs using WRDBIB library files, and how to prepare custom bibliographic reports and author indexes. Users may search the WRDBIB data base on the following variable fields as described in the Data Dictionary: Authors, organizational source, title, citation, publication year, descriptors, and the WRSIC (accession) number. The Users Guide provides ample examples of program runs illustrating various retrieval and report generation aspects. Appendices include Multics access and file manipulation procedures; a ' Glossary of Selected Terms'; and a complete ' Retrieval Session ' with step-by-step outlines. (USGS)

Open-File Report↗

Geosoft eXecutables (GX's) Developed by the U.S. Geological Survey, Version 2.0, with Notes on GX Development from Fortran Code

Introduction Geosoft executables (GX's) are custom software modules for use with the Geosoft Oasis montaj geophysical data processing system, which currently runs under the Microsoft Windows 2000 or XP operating systems. The U.S. Geological Survey (USGS) uses Oasis montaj primarily for the processing and display of airborne geophysical data. The ability to add custom software modules to the Oasis montaj system is a feature employed by the USGS in order to take advantage of the large number of geophysical algorithms developed by the USGS during the past half century. This main part of this report, along with Appendix 1, describes Version 2.0 GX's developed by the USGS or specifically for the USGS by contractors. These GX's perform both basic and advanced operations. Version 1.0 GX's developed by the USGS were described by Phillips and others (2003), and are included in Version 2.0. Appendix 1 contains the help files for the individual GX's. Appendix 2 describes the new method that was used to create the compiled GX files, starting from legacy Fortran source code. Although the new method shares many steps with the approach presented in the Geosoft GX Developer manual, it differs from that approach in that it uses free, open-source Fortran and C compilers and avoids all Fortran-to-C conversion.

Open-File Report↗

Chemical-Help Application for Classification and Identification of Stormwater Constituents

A computer application called Chemical Help was developed to facilitate review of reports for the National Highway Runoff Water-Quality Data and Methodology Synthesis (NDAMS). The application provides a tool to quickly find a proper classification for any constituent in the NDAMS review sheets. Chemical Help contents include the name of each water-quality property, constituent, or parameter, the section number within the NDAMS review sheet, the organizational levels within a classification hierarchy, the database number, and where appropriate, the chemical formula, the Chemical Abstract Service number, and a list of synonyms (for the organic chemicals). Therefore, Chemical Help provides information necessary to research available reference data for the water-quality properties and constituents of potential interest in stormwater studies. Chemical Help is implemented in the Microsoft help-system interface. (Computer files for the use and documentation of Chemical Help are included on an accompanying diskette.)

Open-File Report↗

The Limit of Inundation of the September 29, 2009, Tsunami on Tutuila, American Samoa

U.S. Geological Survey scientists investigated the coastal impacts of the September 29, 2009, South Pacific tsunami in Tutuila, American Samoa in October and November 2009, including mapping the alongshore variation in the limit of inundation. Knowing the inundation limit is useful for planning safer coastal development and evacuation routes for future tsunamis and for improving models of tsunami hazards. This report presents field data documenting the limit of inundation at 18 sites around Tutuila collected in the weeks following the tsunami using Differential GPS (DGPS). In total, 15,703 points along inundation lines were mapped. Estimates of DGPS error and uncertainty in interpretation of the inundation line are provided as electronic files that accompany this report.

Open-File Report↗

High-resolution seismic-reflection data offshore of Dana Point, southern California borderland

The U.S. Geological Survey collected high-resolution shallow seismic-reflection profiles in September 2006 in the offshore area between Dana Point and San Mateo Point in southern Orange and northern San Diego Counties, California. Reflection profiles were located to image folds and reverse faults associated with the San Mateo fault zone and high-angle strike-slip faults near the shelf break (the Newport-Inglewood fault zone) and at the base of the slope. Interpretations of these data were used to update the USGS Quaternary fault database and in shaking hazard models for the State of California developed by the Working Group for California Earthquake Probabilities. This cruise was funded by the U.S. Geological Survey Coastal and Marine Catastrophic Hazards project. Seismic-reflection data were acquired aboard the R/V Sea Explorer, which is operated by the Ocean Institute at Dana Point. A SIG ELC820 minisparker seismic source and a SIG single-channel streamer were used. More than 420 km of seismic-reflection data were collected. This report includes maps of the seismic-survey sections, linked to Google Earth? software, and digital data files showing images of each transect in SEG-Y, JPEG, and TIFF formats.

Open-File Report↗

Hydrodynamic assessment data associated with the July 2010 line 6B spill into the Kalamazoo River, Michigan, 2012–14

Hydrodynamic-assessment data for the Kalamazoo River were collected by the U.S. Geological Survey (USGS) during 2012–14 to augment other hydrodynamic data-collection efforts by Enbridge Energy L.P. and the U.S. Environmental Protection Agency associated with the 2010 Enbridge Line 6B oil spill. Specifically, the USGS data-collection efforts were focused on additional background data needed for 2013–14 updates to Enbridge’s 2012 hydrodynamic and sediment-transport models for simulating resuspension and deposition of submerged oil. The main data-collection activities consisted of the following along the Kalamazoo River: (1) a survey done by use of a Real-Time Network Global Navigation Satellite System, (2) water-level measurements in impounded sections, (3) velocity, discharge, and bathymetry measurements at transects and stationary points along the oil-affected reach of the river and in Morrow Delta and Lake, (4) estimates of tributary inflows, and (5) suspended-sediment concentrations and particle-size data at USGS streamgages along the Kalamazoo River. The method used to estimate bed shear stress from stationary velocity data is described. Averaged transect-based velocity data that were processed to match model grids also are included. In addition to model inputs and checks, these hydrodynamic-related data were used in submerged oil containment and recovery operations focused in impoundments and designated sediment traps. This report contains a description of the scope and methods associated with the hydrodynamic data collection and supplementary files of the USGS data that were used in modeling activities.

Michigan↗