USGS Science⌕ Search

SEARCH · USGS Science

Results for “Journal of Geophysical Research: Solid Earth”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

1,663 records · Page 45Linked to original sources
USGS1977

Acid-rain weathering of a metasedimentary rock basin, Herkimer County, New York

A geochemical balance of major chemical constituents of precipitation inflow with those of surface-water outflow was used to evaluate the effect of acid rainfall (average pH = 4.3) on weathering rates of metasedimentary rocks underlying a surface-water basin in New York State. Precipitation samples and surface-water samples show that approximately 45 percent of the net cation outflow is due to weathering by precipitation acidity. The remaining 55 percent of the cation load in the outflow is attributed to interactions between atmosphere, rock, and soil water in the unsaturated zone. Comparison of the acidity of acid precipitation and air-equilibrated distilled water suggests that since preindustrial time, precipitation acidity has probably increased weathering rates for this basin approximately 75 percent. The increased acidity of the precipitation may also increase the rate of dissolution of heavy metals from water-piping systems.

New York↗
USGS1997

Water-quality assessment of south-central Texas: Occurrence and distribution of volatile organic compounds in surface water and ground water, 1983-94, and implications for future monitoring

The study area of the South-Central Texas study unit of the National Water-Quality Assessment Program comprises the Edwards aquifer in the San Antonio region and its catchment area. The first phase of the assessment includes evaluation of existing water-quality data for surface water and ground water, including volatile organic compounds, to determine the scope of planned monitoring. Most analyses of volatile organic compounds in surface water are from the National Pollutant Discharge Elimination System sites in San Antonio, Texas. Nine volatile organic compounds were detected at the six sites. The three compounds with the most detections at National Pollutant Discharge Elimination System sites are 1,2,4-trimethylbenzene, toluene, and xylene. Analysis of volatile organic compounds in ground water was limited to Edwards aquifer wells. Twenty-eight volatile organic compounds were detected in samples from 89 wells. The five most commonly detected compounds in samples from wells, in descending order, are tetrachloroethene, trichloroethene, bromoform, chloroform, and dibromochloromethane. Detections of volatile organic compounds in surface water and ground water within the South-Central Texas study area are limited to site-specific sources associated with development; therefore, planned monitoring for possible detections of volatile organic compounds as part of the National Water-Quality Assessment Program will emphasize areas of expanding population and development. Monitoring of volatile organic compounds is planned at National Pollutant Discharge Elimination System sites, at basic fixed surface-water sites, and in the ground-water study-unit surveys.

Texas↗
USGS1994

Hydrogeologic atlas of aquifers in Indiana

Aquifers in 12 water-management basins of Indiana are identified in a series of 104 hydrogeologic sections and 12 maps that show the thickness and configuration of aquifers. The vertical distribution of water-bearing units and a generalized potentiometric profile are shown along 3,500 miles of section lines that were constructed from drillers' logs of more than 4,200 wells. The horizontal scale of the sections is 1:125,000. Maps of aquifers showing the areal distribution of each aquifer type were drawn at a scale of 1:500,000. Unconsolidated aquifers are the most widely used aquifers in Indiana and include surficial, buried, and discontinuous layers of sand and gravel. Most of the surficial sand and gravel is in large outwash plains in northern Indiana and along the major rivers. Buried sand and gravel aquifers are interbedded with till deposits in much of the northern two-thirds of Indiana. Discontinuous sand and gravel deposits are present as isolated lenses, primarily in glaciated areas. The bedrock aquifers generally have lower yields than most of the sand and gravel aquifers; however, bedrock aquifers are areally widespread and are an important source of water. Bedrock aquifer types consist of carbonates; sandstones; complexly interbedded sandstones, siltstones, shales, limestones, and coals; and an upper weathered zone in low permeability rock. Carbonate aquifers underlie about one-half of Indiana and are the most productive of the bedrock aquifers. The other principal bedrock aquifer type, sandstone, underlies large areas in the southwestern one-fifth of Indiana. No aquifer is known to be present in the southeastern corner of Indiana.

Water-Resources Investigations Report↗
USGS2024

Evaluation of the lithium resource in the Smackover Formation brines of southern Arkansas using machine learning

Global demand for lithium, the primary component of lithium-ion batteries, greatly exceeds known supplies, and this imbalance is expected to increase as the world transitions away from fossil fuel energy sources. High concentrations of lithium in brines have been observed in the Smackover Formation in southern Arkansas (>400 milligrams per liter). We used published and newly collected brine lithium concentration data to train a random forest machine-learning model using geologic, geochemical, and temperature explanatory variables and create a map of predicted lithium concentrations in Smackover Formation brines across southern Arkansas. Using these predicted lithium maps with reservoir parameters and geologic information, we calculated that there are 5.1 to 19 million tons of lithium in Smackover Formation brines in southern Arkansas, which represents 35 to 136% of the current US lithium resource estimate. Based on these calculations, in 2022, 5000 tons of dissolved lithium were brought to the surface within brines as waste streams of the oil, gas, and bromine industries.

Arkansas↗
USGS2024

Pesticide occurrence in shallow groundwater in three regions of agricultural land use: Baldwin County, the Wiregrass region, and the Tennessee River valley region of Alabama, 2009–20

As part of a cooperative investigation between the U.S. Geological Survey and the Alabama Department of Agriculture and Industries, a network of 22 groundwater wells were sampled from 2014 through 2020 for about 230 pesticide and pesticide degradate compounds. Wells were located in three regions of intensive agricultural land use in Alabama: Baldwin County, the Wiregrass region, and the Tennessee River valley region. Metolachlor sulfonic acid, a degradate of the herbicide metolachlor, was the most frequently detected compound, occurring in about 70 percent of the samples. Three other compounds, metolachlor, atrazine, and 2-chloro-4-isopropylamino-6-amino-s-triazine, were also detected in more than half of the samples. Metolachlor and its degradates accounted for 33 of the 50 greatest compound concentrations study-wide, including the maximum pesticide concentration across all compounds (62,500 nanograms per liter). The frequency and magnitude of detections of many specific pesticide compounds varied among the three regions, but all detected pesticide concentrations were well below the U.S. Environmental Protection Agency maximum contaminant levels and applicable human health benchmarks. Sample results were combined with results of previous (2009–13) sampling to provide a continuous time-series of data for 2009–20. More than half of the 289 pesticide compounds analyzed during 2009–20 were not detected in any samples. Only four compounds were detected at great enough frequency throughout the 10 sampling years to evaluate patterns of change through time. Metolachlor and its degradate, metolachlor sulfonic acid, were frequently detected in all regions. Atrazine and its degradate, 2-chloro-4-isopropylamino-6-amino-s-triazine, were also detected in wells from all regions, but the variability and magnitude of concentrations were greatest in the Tennessee River valley region. No apparent temporal pattern in concentrations was found.

Alabama↗
USGS1998

Continuous hydrologic simulation of runoff for the Middle Fork and South Fork of the Beargrass Creek basin in Jefferson County, Kentucky

The Hydrological Simulation Pro-gram-FORTRAN (HSPF) was applied to an urban drainage basin in Jefferson County, Ky to integrate the large amounts of information being collected on water quantity and quality into an analytical framework that could be used as a management and planning tool. Hydrologic response units were developed using geographic data and a K-means analysis to characterize important hydrologic and physical factors in the basin. The Hydrological Simulation Program FORTRAN Expert System (HSPEXP) was used to calibrate the model parameters for the Middle Fork Beargrass Creek Basin for 3 years (June 1, 1991, to May 31, 1994) of 5-minute streamflow and precipitation time series, and 3 years of hourly pan-evaporation time series. The calibrated model parameters were applied to the South Fork Beargrass Creek Basin for confirmation. The model confirmation results indicated that the model simulated the system within acceptable tolerances. The coefficient of determination and coefficient of model-fit efficiency between simulated and observed daily flows were 0.91 and 0.82, respectively, for model calibration and 0.88 and 0.77, respectively, for model confirmation. The model is most sensitive to estimates of the area of effective impervious land in the basin; the spatial distribution of rain-fall; and the lower-zone evapotranspiration, lower-zone nominal storage, and infiltration-capacity parameters during recession and low-flow periods. The error contribution from these sources varies with season and antecedent conditions.

Kentucky↗
USGS2025

The influence of nodule versus crust morphology on the composition of seamount-hosted ferromanganese minerals

Ferromanganese mineral precipitation in the global oceans is ubiquitous, occurring in the form of both crusts and nodules at a broad range of depths and seafloor terrains. Although ferromanganese crusts and nodules are both composed of ferromanganese minerals, mineralogy and mean element concentrations compiled for regional crust versus nodule occurrences differ. Notably, most published compilations compare nodules from abyssal plain sediments to crusts forming on seamounts, and do not address the question as to whether mineral morphology may affect the composition of crusts and nodules in addition to environmental factors. To address this, we have compiled a dataset of co-located hydrogenetic (seawater sourced) open-ocean ferromanganese crusts and seamount-hosted nodules. The preliminary data presented here support our hypothesis that co-located crusts and nodules exhibit similar compositions, both in terms of their mineralogy and mean element concentrations, as well as overall variance in concentrations for any given element. These data indicate that local processes influence sample-to-sample variation in both crusts and nodules, in contrast to broader ferromanganese variation reported between open-ocean seamounts- hosted crusts and abyssal plain-hosted nodules.

Conference Paper↗
USGS2025

The 1912 Ms 7.2 earthquake in the Denali region of central Alaska

The 2002 M w 7.9 earthquake in central Alaska ruptured 340 km on three faults—Susitna Glacier thrust fault, Denali fault, Totschunda fault—crossing both the Richardson Highway and the Alaska Pipeline. Its occurrence prompted renewed interest in historical large earthquakes that possibly originated on the Denali fault. One of these earthquakes was a M s 7.2 event on July 7, 1912, which we revisit with two approaches: (1) probabilistic relocation of the epicenter using globally recorded arrival times, and (2) compilation and reassessment of shaking intensity reports to estimate a macroseismic epicenter. Our preferred instrumental epicenter is west of the Parks Highway and in agreement with the maximum‐reported shaking, which was from the Parker–Browne expedition of Denali. We also relocated a M s 6.4 aftershock, whose epicenter is 11 km from the mainshock. Candidate faults for the 1912 earthquake include the Denali fault, the McLeod Creek thrust fault, and the Kantishna Hills thrust fault. Future analysis of active faults, paleoseismic results, 1912 instrumental data, and 1912 felt reports may help in interpreting the fault and mechanism of the 1912 earthquake.

Alaska↗
USGS2026

Development of a hydrologic flow model of the Zuñi Salt Lake and surrounding areas, west-central New Mexico

The terminal Zuñi Salt Lake is in a maar in west-​central New Mexico and contains hypersaline water that has long been used by Native Americans for religious purposes and the collection of salt. The U.S. Geological Survey (USGS), in cooperation with the Zuni Tribe of the Zuni Reservation, New Mexico, and Bureau of Reclamation, developed the Zuñi Salt Lake hydrologic flow model to simulate the steady-state conditions of the lake and surrounding groundwater-flow system. The model is a tool that can be used to analyze the potential hydrologic responses to resource development in the region under different water-use scenarios, which can support negotiations that could help protect future use of the lake. The USGS modular hydrologic model, MODFLOW 6, was used to simulate the hydrologic system of the lake and surrounding areas. To define the layering of the model, a three-dimensional hydrogeologic framework was constructed, which included seven informal hydrogeologic units and the locations of faults that truncate and offset the units. Calibration of the model was performed using the iterative ensemble smoother included in a parameter estimation software suite (PEST++). The iterative ensemble smoother approach resulted in a posterior parameter ensemble of model realizations with parameter and simulated values that show similar success in matching observations. Groundwater flux to the Zuñi Salt Lake simulated by using the posterior parameter distribution ranged from 26 to 730 acre-feet per year with a mean, median, and standard deviation of 530, 570, and 170 acre-feet per year, respectively. The relative contribution of groundwater discharge to the lake was simulated using a particle-tracking model for MODFLOW (MODPATH) to be from, in order of decreasing contribution, the Mesaverde, Cenozoic, Mancos, and Dakota hydrogeologic units. Simulations of future conditions using the ensemble of models can provide an empirical estimate of forecast uncertainty without substantial additional analysis.

New Mexico↗
USGS2024

Summary of annual repeat magnetotelluric surveys of the Geysers geothermal field

As part of a multi-year project, funded by the California Energy Commission, annual magnetotelluric (MT) surveys have been collected at The Geysers geothermal field in northern California with the goal of measuring temporal changes within the steam field. The repeat surveys started in 2021 and repeated a 2017 survey (Peacock et al., 2020) with further extension to the southern part of the geothermal field. Temporal variations in the MT transfer functions are observed to be spatially coherent and compartmentalized. Mapping residual phase tensor ellipses demonstrates the direction of maximum change is often aligned with existing fracture orientations. Three dimensional inversion of the MT data, using the inversion results from previous years as the starting model, indicates that the steam reservoir has generally become more resistive over time (~10%), suggesting more steam in the field. A few pockets within the steam field have become more electrically conductive over time and are collocated with injection wells, suggesting either more fluid content in those zones, less steam, or more saline fluids.

California↗
USGS2026

Abandonment of the Upper Devonian Greenland Gap Group and Scherr Formation and revision of the Upper Devonian Brallier and Foreknobs Formations in the central Valley and Ridge Province

This study revises the lithostratigraphic framework of the Upper Devonian interval traditionally assigned to the Greenland Gap Group across the central Appalachian Valley and Ridge Province. The work aims to modernize and standardize lithostratigraphic nomenclature, establish a new reference section and demonstrate how the revised stratigraphy improves edge-matching of 1:24,000 scale geologic maps and supports compilation mapping at scales of 1:100,000 and larger. The revision eliminates the names Greenland Gap Group, Scherr Formation and the Minnehaha Springs Member of the Scherr Formation; reassigns all strata previously designated as Scherr Formation by Dennison (1970) to the upper Brallier Formation; and abandons the basal Mallow Member of the Foreknobs Formation, placing its strata within the upper Brallier as originally defined by Butts (1918). The contact between the Brallier and Foreknobs formations is placed at the base of the first mappable, ridge-forming package of fine- to coarse-grained, cross-bedded, sandstone beds, often containing rounded quartz pebbles with minor interbeds of shale and siltstone. This contact may be gradational in places but, even in absence of good exposure, can usually be distinguished topographically in recently produced lidar-derived imagery as having elevated relief due to the presence of more resistant, compositionally mature coarse-grained sandstone-rich strata. Applying this criterion for mapping the contact between the Brallier and Foreknobs formations has resulted in reconciliation of mismatches of geologic contacts along several 7.5-minute quadrangle boundaries in the states of Virginia, West Virginia, Maryland and Pennsylvania. A new reference section at Baker, West Virginia showcases the contacts between the Harrell Shale, Brallier Formation, Foreknobs Formation and Hampshire Formation. A digital outcrop model of the reference section is provided for future preservation.

Maryland, Pennsylvania, Virginia, West Virginia↗
USGS2026

Water use permits as of July 2024 and reported water use near the North Unit of Theodore Roosevelt National Park, North Dakota, 1980–2023

Starting in the early 2000s, increasing oil and gas development in western North Dakota created a need for additional water resources from surface-water and groundwater sources near the North Unit of Theodore Roosevelt National Park. To summarize the use of water in that area, the U.S. Geological Survey, in cooperation with the National Park Service, developed a map of surface-water and groundwater resources, aquifers, and water-use diversions, and plotted water-use trends from 1980 to 2023. Reported water used from permits in the map area has more than doubled since 2020, increasing from about 750 acre-feet in 2020 to about 2,300 acre-feet in 2022 and 2,000 acre-feet in 2023. Surface water provided the primary source of reported water used for the study period with an average of about 410 acre-feet per year from 1980 through 2017 and about 1,330 acre-feet per year from 2018 through 2023. After 2011, groundwater sourced from the Little Missouri River, Tobacco Garden Creek, Fox Hills, Fort Union, and Dakota aquifers became a larger portion of total annual reported water use from permits in the map area. From 1980 through 2015, water use for irrigation averaged 86 percent of the total annual reported surface-water and groundwater use in the map area. Starting in 2011, however, industrial uses became a proportionally larger total use of water, and in 2015, became the highest reported volume of water use in the map area. From 2011 to 2023, industrial use designated for water depots increased from 50 acre-feet to about 1,370 acre-feet, accounting for about 70 percent of total reported water use in the map area in 2023.

North Dakota↗
USGS2025

A geospatial analysis of water-quality threats from orphan wells in principal and secondary aquifers of the United States

Throughout the history of oil and gas production in the United States, millions of wells have been drilled for exploration and energy production. Hundreds of thousands of unplugged wells are no longer actively producing and are currently under orphan status, with no responsible party obligated for plugging. Orphan wells can pose threats to water resources by providing pathways for contaminants such as hydrocarbons and brines to migrate into water-supply aquifers. In this study, we investigate the potential threats to groundwater resources posed by orphan wells at the national scale. Water-quality data is extremely sparse in relation to orphan wells nationally and may not be suitable for identifying contamination from oil and gas development. We used geospatial and statistical methods to evaluate which principal and secondary aquifer systems may be most susceptible to contamination from orphan wells. Analysis involved three sets of susceptibility factors including: 1) factors related to the number and density of orphan wells; 2) factors that can threaten well integrity and contribute to transport of contaminants; and 3) factors related to groundwater withdrawal rates and the affected populations/communities in the event of water quality disturbances. From a dataset of 117,672 documented orphan wells, 64,203 fall within a principal aquifer system, while the remainder fall within a secondary aquifer system. By assessing the combination of well integrity and hydrogeologic factors within these aquifer systems, five groupings of principal aquifers were identified, where groups ranged from aquifer systems with high numbers of orphan wells, multiple well integrity threats and high withdrawals, to aquifers with a relatively low number of orphan wells, limited well integrity threats and minimal water use. Three regions of the country emerge containing aquifers with higher susceptibility to contamination from orphan oil and gas wells. These regions include 1) The Appalachian Basin (including the Pennsylvanian Aquifer System), 2) The Gulf Coast Aquifers (including the Coastal Lowlands Aquifer system) and 3) The California Aquifers (including the California Coastal Basin Aquifer system). This work is the first multivariate geospatial investigation of orphan wells and groundwater resources on a national scale, and sheds light on which aquifers are most susceptible to groundwater contamination from orphan wells.

Science of the Total Environment↗
USGS2024

Site response in the Walnut Creek–Concord region of the San Francisco Bay, California: Ground motion amplification in a fault-bounded basin

Thirty‐seven portable accelerometers were deployed in the eastern San Francisco Bay communities of Walnut Creek and Concord to study site response in a fault‐bounded, urban, sedimentary basin. Local earthquakes were recorded for a period of two years from 2017 to 2019 resulting in 101 well‐recorded events. Site response is estimated by two methods: the reference site spectral ratio method and a source‐site spectral inversion method. The reference site spectral ratio method allows investigation of the variability of site amplification with source azimuth and frequency. The source‐site spectral inversion method yields the best least‐squares fit to site response for a database of ground‐motion records. Both methods show substantial amplification in the Walnut Creek–Concord basin below 2 Hz indicating strong surface‐wave development. Greater amplification is seen for sources aligned along the long axis of the basin. Inversion using close‐in sources at short distances yields lower amplification at longer periods than the entire data set due to reduced surface‐wave generation for steeper angles of incidence. Inversion of site response spectra for shallow shear‐wave velocity using a global search algorithm yields V S30 values consistent with generalized mapping results based on geology and topography but with greater variability due to local site variations. 3D finite‐element modeling shows greater amplification in the Walnut Creek–Concord basin with a basin‐edge effect likely contributing to higher ground motions. Topography is also seen to lead to increased scattering and shadowing effects.

California↗
USGS2024

Interactive effects of salinity and hydrology on radial growth of bald cypress (Taxodium distichum (L.) Rich.) in coastal Louisiana, USA

Tidal freshwater forests are usually located at or above the level of mean high water. Some Louisiana coastal forests are below mean high water, especially bald cypress ( Taxodium distichum (L.) Rich.) forests because flooding has increased due to the combined effects of global sea level rise and local subsidence. In addition, constructed channels from the coast inland act as conduits for saltwater. As a result, saltwater intrusion affects the productivity of Louisiana’s coastal bald cypress forests. To study the long-term effects of hydrology and salinity on the health of these systems, we fitted dendrometer bands on selected trees to record basal area increment as a measure of growth in permanent forest productivity plots established within six bald cypress stands. Three stands were in freshwater sites with low salinity rooting zone groundwater (0.1–1.3 ppt), while the other three had higher salinity rooting zone groundwater (0.2–4.9 ppt). Water level was logged continuously, and salinity was measured monthly to quarterly on the surface and in groundwater wells. Higher groundwater salinity levels were related to decreased bald cypress radial growth, while higher freshwater flooding increased radial growth. With these data, coastal managers can model rates of bald cypress forest change as a function of salinity and flooding.

Louisiana↗
USGS2026

Simulation of the impacts of spring diversions on streamflow in the Strawberry Creek watershed, San Bernardino County, California, using an integrated hydrological model

The Strawberry Creek watershed, in the San Bernardino Mountains of southern California, features a group of natural springs known as Arrowhead Springs that have been augmented with diversions in the form of sub-horizontal borings and tunnels. Understanding the effects of these structures on streamflow through groundwater capture is crucial for managing surface-water resources in this watershed. In this study, we constructed the Strawberry Creek integrated hydrological model to increase this understanding. The Strawberry Creek integrated hydrological model is an integrated surface runoff and groundwater model, GSFLOW to simulate surface runoff and infiltration and groundwater flow. The model has 263 rows and 176 columns in each of its three layers. The model area includes the Strawberry Creek and four adjacent watersheds. The precipitation-runoff modeling system was calibrated using two streamflow gaging stations, and the groundwater and surface-water flow model was calibrated to the reported spring diversion discharge and a sparse number of groundwater-level measurements. The Strawberry Creek integrated hydrological model was run with and without diversions active, and simulated streamflow was compared, indicating that in the headwaters of Strawberry Creek, about 35 percent of the diversion flow was captured from base flow.

California↗
USGS1990

Floods of February 1989 in Tennessee

Rainfall amounts of over 5 inches the night of February 13 and the morning of February 14, 1989, caused flooding in areas of Middle and West Tennessee. The towns of Lebanon in Middle Tennessee and Obion in West Tennessee were most severely affected. Most of the business district in Lebanon and many residential areas in Obion were flooded. Recurrence intervals for 24-hour rainfall totals were as high as 25 years at some sites but most peak discharges had recurrence intervals of less than 10 years. Rainfall amounts for the period February 13-20, 1989, peak stages and discharges for this flood, the peak of record, and a list of discharge measurements made during the flood are documented in this report.

Tennessee↗
USGS2024

Slip rate for the Rose Canyon fault through San Diego, California, based on analysis of GPS data: Evidence for a potential Rose Canyon–San Miguel-Vallecitos fault connection?

The Rose Canyon fault is the southern extension of the larger Newport–Inglewood–Rose Canyon fault system, which represents a major structural boundary in the Inner Continental Borderland (ICB) offshore of southern California. Ten to fifteen percent of total plate boundary motion in southern California is thought to be accommodated by the faults of the ICB, but the exact distribution of slip is uncertain. With an onshore segment, the Rose Canyon fault offers an opportunity to measure the slip rate using traditional geodetic methods. In this study, we use Global Positioning System (GPS) surface velocities from a combined campaign and continuous GPS network to constrain elastic models of the Rose Canyon fault. We then compare the observed surface velocities with proposed conceptual models of regional fault connections that facilitate the transfer of slip into the Rose Canyon fault to assess how well the observations are explained by the models. The results of elastic half‐space models suggest that the Rose Canyon fault may be slipping toward the higher end of geologic estimates, with the preferred model indicating a slip rate of 2.4 ± 0.5 mm/yr. Although limited in terms of near‐fault benchmarks, we find an improved model fit using an asymmetrical elastic half‐space model and a higher slip rate, suggesting a potential rheological contrast across the Rose Canyon fault, similar to observations from the northern Newport–Inglewood fault segments. Observed GPS surface velocities, background seismicity, and gravity anomalies south of San Diego Bay point toward a more easterly trace for the Rose Canyon fault, suggesting a possible connection with the San Miguel–Vallecitos fault system. Such a connection could increase the potential rupture lengths of future earthquakes and have important consequences for regional seismic hazards.

California↗