USGS Science⌕ Search

SEARCH · USGS Science

Results for “Journal of Analytical and Applied Pyrolysis”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

1,688 records · Page 45Linked to original sources
USGS2024

Ambient flow and transport in long-screened, sand-packed wells: Insights into cross contamination and wellbore flow

The presence of long-screened wells with a surrounding sand pack can have a major effect on the redistribution of contaminants in groundwater, particularly when the wells are set in low-hydraulic conductivity aquifers. Such redistribution, or cross contamination, can occur through vertical flow and advective transport or by in-well mixing via multiple non-advective transport processes. A multi-method approach, including the use of single borehole dilution tracer (SBDT) logging, was undertaken to estimate vertical transport of trichloroethylene (TCE) in 8 discontinued remedial extraction wells, all constructed with long screens (100 ft, or 30.6 m long) and surrounding sand packs, at Site 25, Edwards Air Force Base, California. The site is within an enclosed drainage basin that is underlain primarily by quartz-monzonite-granitic rocks in various states of weathering. Prior to this study, little information was available on the depths of fracture zones intersecting the wellbores. Results indicate that because of in-well mixing processes, a potential redistribution of TCE of up to 9 g/d per well occurs as a consequence of leaving the wells inactive (unpumped) and unsealed, as measured by SBDT logging. Simulations of flow made with a generic model of the site show that if the wells were to be sealed with well liners, with the intent of reducing vertical TCE transport but the sand pack left intact, TCE transport decreases by 53% overall compared to leaving the wells unlined.

Environmental Earth Sciences↗
USGS2024

Characterization of change in tree cover state and condition over the conterminous United States

Variability in the effects of disturbances and extreme climate events can lead to changes in tree cover over time, including partial or complete loss, with diverse ecological consequences. It is therefore critical to identify in space and time the change processes that lead to tree cover change. Studies of change are often hampered by the lack of data capable of consistently detecting different types of change. Using the Landsat satellite record to create a long time-series of land cover and land cover change, the U.S. Geological Survey Land Change Monitoring Assessment and Projection (LCMAP) project has made an annual time series of land cover across the conterminous United States for the period 1985 to 2018. Multiple LCMAP products analyzed together with map validation reference plots provide a robust basis for understanding tree cover change. In LCMAP (Collection 1.2), annual change detection is based on harmonic model breaks calculated at each Landsat pixel from the Continuous Change Detection and Classification (CCDC) algorithm. The results showed that the majority of CCDC harmonic model breaks (signifying change) indicated partial tree cover loss (associated with management practices such as tree cover thinning) as compared to complete tree cover loss (associated with practices like clearcut harvest or fire disturbance). Substantially fewer occurrences of complete tree cover loss were associated with change in land cover state. The area of annual tree cover change increased after the late 1990s and stayed high for the rest of the study period. The reference data showed that tree harvest dominated across the conterminous United States. The majority of tree cover change occurred in evergreen forests. Large estimates of disturbance-related tree cover change indicated that tree cover loss may have previously been underreported due to omission of partial tree cover loss in prior studies. This has considerable implications for forest carbon accounting along with tracking ecosystem goods and services.

Forests↗
USGS1992

Nonpoint-source pollutant discharges of the three major tributaries to Reelfoot Lake, west Tennessee, October 1987-September 1989

An investigation of the concentration and loads of nitrogen, phosphorus, and suspended sediment in storm runoff to Reelfoot Lake, in western Tennessee, was conducted from October 1987 through September 1989. Concentrations of selected herbicides also were defined. Reelfoot Lake, with a surface area of about 15,500 acres, is the largest natural lake in Tennessee and an important recreation and fisheries resource. Previous studies showed that the lake is hypereutrophic, a condition caused by high concentrations of nutrients in water and sediments discharged from the three principal tributaries (South Reelfoot Creek, North Reelfoot Creek, and Running Slough) to the lake. Pesticides, including herbicides, have been detected in the lake's bottom sediments. Storm runoff contributed about 87percent of the total water discharge of the three main tributaries to Reelfoot Lake. South Reelfoot Creek contributed about 4.7 tons per acre per year of suspended sediment, while North Reelfoot Creek contributed about 1.9 tons per acre per year. Running Slough contributed only about 0.31 ton per acre per year of suspended sediment. Most of the suspended sediment was transported by storm runoff between October and March. About 80 percent of the annual streamflow of the three tributaries occurs during these months. The North Reelfoot Creek basin contributed 8.2 pounds per acre per year of total nitrogen and 2.4 pounds per acre per year of total phosphorus. South Reelfoot Creek basin contributed about 6.5 and 1.3 pounds per acre per year of total nitrogen and phosphorus, respectively, while Running Slough basin contributions were 3.4 and 0.86 pounds per acre per year, respectively. The differences in nutrient yields appear to result from more row-crop agriculture and the relatively steeply sloping agricultural land in the North Reelfoot Creek basin. Ninety-one percent of the total nitrogen load and 95 percent of the total phosphorus load in the three streams was transported by storm runoff. Significant differences in the mean concentrations of nutrients in runoff were defined between the active agricultural months (April through September) and the inactive months (October through March). Storm-runoff samples were analyzed for II selected triazine herbicides. Alachlor and atrazine were the most commonly detected herbicides. Thirty-two percent of the samples contained detectable levels of alachlor and 93 percent of the samples contained detectable levels of atrazine. Ninety percent of the samples collected during the active agricultural months contained detectable leveki of alachlor and all 29 samples contained detectable levels of atrazine. Sixteen samples exceeded lifetime health-advisory levels for atrazine in drinking water (3 micrograms per liter); two samples collected from the April IS, 1988, storm at North Reelfoot Creek and South Reelfoot Creek contained 42 and 57 micrograms per liter of atrazine, respectively. Concentrations of the other nine triazine herbicides were generally less than the level of detection (0.1 microgram per liter).

Tennessee↗
USGS2025

A review of abrupt permafrost thaw: Definitions, usage, and a proposed conceptual framework

Purpose of Review We review how ‘abrupt thaw’ has been used in published studies, compare these definitions to abrupt processes in other Earth science disciplines, and provide a definitive framework for how abrupt thaw should be used in the context of permafrost science. Recent Findings We address several aspects of permafrost systems necessary for abrupt thaw to occur and propose a framework for classifying permafrost processes as abrupt thaw in the future. Based on a literature review and our collective expertise, we propose that abrupt thaw refers to thaw processes that lead to a substantial persistent environmental change within a few decades. Abrupt thaw typically occurs in ice-rich permafrost but may be initiated in ice-poor permafrost by external factors such as hydrologic change (i.e., increased streamflow, soil moisture fluctuations, altered groundwater recharge) or wildfire. Summary Permafrost thaw alters greenhouse gas emissions, soil and vegetation properties, and hydrologic flow, threatening infrastructure and the cultures and livelihoods of northern communities. The term ‘abrupt thaw’ has emerged in scientific discourse over the past two decades to differentiate processes that rapidly impact large depths of permafrost, such as thermokarst, from more gradual, top-down thaw processes that impact centimeters of near-surface permafrost over years to decades. However, there has been no formal definition for abrupt thaw and its use in the scientific literature has varied considerably. Our standardized definition of abrupt thaw offers a path forward to better understand drivers and patterns of abrupt thaw and its consequences for global greenhouse gas budgets, impacts to infrastructure and land-use, and Arctic policy- and decision-making.

Current Climate Change Reports↗
USGS2025

Nodal seismic deployment on Mauna Loa volcano, Hawaii: Dataset and preliminary insights

Mauna Loa is the largest active volcano on Earth, comprising ∼51% of the Island of Hawai‘i’s landmass and posing significant risks to the island’s communities, infrastructure, and natural environment. Historical eruptions have produced lava flows that have reached the ocean in as little as 3 hr. The timing and location of such lava flows in the past 200 yr underscore how critical determination of the location and geometry of magma storage and structure is for volcanic hazard assessment and eruption forecasting. Now, after nearly 38 yr of volcanic quiescence, Mauna Loa has erupted again. On 27 November 2022, fissures initiated within the summit caldera and then migrated to the northeast rift zone, where they generated a large lava flow that threatened a major highway. To improve our understanding of the geometry of this magma system, we deployed a temporary nodal array on Mauna Loa in the summer of 2024. This increased our seismic coverage sufficiently to image this magmatic system. This nodal array consists of 33 seismometers distributed on and around the volcano and was deployed for over three months to record seismic signals. The primary objective of this project is to resolve the high‐resolution seismic velocity structure and characterize seismic features associated with magma storage and ascent pathways. In this article, we present an overview of the deployment, evaluate the quality of the data, and show example recordings to evaluate the suitability of the data set for future seismic investigations, including earthquake relocation, seismic tomography, and receiver function analysis. Comparisons with nearby permanent broadband and short‐period seismic stations demonstrate that the nodal array recorded high‐quality waveforms, making it a valuable resource for constraining the magmatic system beneath Mauna Loa at multiple scales.

Hawaii↗
USGS2025

Detection of viral, bacterial, and protozoan pathogens and microbial source tracking markers in paired large- and small-volume water samples

When sampling for waterborne microbes, researchers may need to diverge from recommended sample volumes due to logistical constraints, novel targets, or challenging matrices, with little guidance about the potential impact on results. In field studies, we measured bacteria, viruses, and protozoa (15 quantitative polymerase chain reaction assays) in paired large- and small-volume samples to evaluate method performance and relevant factors. Concordance between methods was low. Large-volume ultrafiltration yielded more detections than small-volume sampling, especially for pathogens in groundwater. Greater microbial concentrations were associated with more frequent detections in small-volume samples and greater concordance between paired samples. Large-volume samples appeared to be more susceptible to diminished sensitivity from complex sample matrices. In laboratory studies, recovery of microbes was poorer for large- than small-volume methods, although large-volume methods more reliably detected low-concentration targets. Large-volume samples were less stable than small-volume samples during storage. Overall, large-volume sampling was superior for detecting pathogens but may underestimate concentrations; small-volume sampling was more prone to false negatives but was adequate when concentrations were relatively high, like we observed for microbial source tracking in surface waters.

Wisconsin↗
USGS2024

Quality of groundwater used for domestic supply in the eastern Sacramento Valley and adjacent foothills, California

Summary More than 2 million Californians rely on groundwater from privately owned domestic wells for drinking-water supply. This report summarizes a water-quality survey of domestic and small-system drinking-water supply wells in the eastern Sacramento Valley and adjacent foothills where more than 25,000 residents are estimated to use privately owned domestic wells. Study results show that inorganic and organic constituents in groundwater were present above regulatory (maximum contaminant level, MCL) benchmarks for public drinking-water quality in 8 and 3 percent, respectively, of the aquifer area used for domestic drinking-water supply (herein, “domestic groundwater resources”; fig. 1). The only inorganic constituent detected above regulatory benchmarks was arsenic. The only organic constituent exceeding regulatory benchmarks was the fumigant 1,2,3-trichloropropane (1,2,3-TCP). Three additional organic constituents—the disinfection by-product chloroform, the gasoline oxygenate methyl tert -butyl ether (MTBE), and the solvent tetrachloroethene (PCE)—were detected at low concentrations below one-tenth of regulatory benchmarks in 34, 10, and 10 percent of domestic groundwater resources, respectively. Total dissolved solids (TDS), iron, and manganese exceeded non-regulatory aesthetic guidelines for drinking water in 5, 10, and 26 percent of domestic groundwater resources, respectively. Per- and polyfluoroalkyl substances (PFASs) were detected in 29 percent of domestic groundwater resources,with 5 percent exceeding the recently enacted (April 2024) U.S. Environmental Protection Agency MCLs. Total coliform and enterococci bacteria were detected in 13 and 8 percent of domestic groundwater resources, respectively. Redox sensitive constituents in this study included arsenic, manganese, nitrate, and iron. In the lower elevation portions of the eastern Sacramento Valley study area, reducing conditions in groundwater aquifers promote elevated arsenic, iron, and manganese, and conversely lower concentrations of nitrate. The presence of the volatile organic compound (VOC) 1,2,3-TCP was related to its past history in select agricultural land uses (on orchards or vineyards) in the Sacramento Valley; however, unlike in the San Joaquin Valley where orchards and vineyards are more common, its detection frequency was low (only detected in one well in this study). Chloroform was frequently detected in this study at low levels. Chloroform is a disinfection byproduct commonly found in domestic wells treated by shock chlorination. The solvent PCE is among the most frequently detected VOCs in groundwater, which is primarily related to its long history of use and its persistence in groundwater in oxic conditions. The gasoline oxygenate MTBE was a contaminant introduced to groundwater through atmospheric exchange when it was used as a fuel additive to decrease smog inducing emissions from vehicles. Its occurrence in groundwater at low levels is expected and makes it a potentially useful tracer of relatively recent recharge water being withdrawn from wells. The PFASs are anthropogenic chemicals with hundreds of uses, and they have been incorporated into many different products, processes, and applications worldwide. Like MTBE, the occurrence of PFASs in groundwater may be in part due to atmospheric exchange, but there are several other pathways that contribute PFASs to the environment.

California↗
USGS2025

Comparisons of shoreline positions from satellite-derived and traditional field- and remote-sensing techniques

Satellite-derived shorelines (SDS) have the potential to help researchers answer critical coastal science questions and support work to predict coastal change by filling in the spatial and temporal gaps present in current field-based and remote-sensing data collection methods. The U.S. Geological Survey conducted comparison analyses of traditionally sourced shorelines and SDS in diverse coastal landscapes to determine how SDS could be used in ongoing and future work across varied coastal environments and provided some initial findings that could be used for implementation. Using CoastSeg, a browser-based program for SDS detection and mapping, SDS for the period 1984–2023 for multiple locations across the United States were compared to shoreline positions from traditionally sourced shoreline data. In this report, the authors present these comparisons alongside lessons learned and challenges encountered when building SDS workflows in different coastal locations. Results show that individual SDS have larger uncertainty and yet produced similar linear trends to sparser, traditionally sourced shoreline data; because SDS methods provide orders of magnitude more data than traditional shoreline-detection methods, they can be used to evaluate shoreline behaviors. Refining average scalar slopes used in tidal corrections did not result in substantial decreases in uncertainty. Using lessons from this work to outline needs for regional implementation, initial setup time would be considerable, being on the order of weeks. However, once complete, shoreline detections and analyses are fast (on the order of minutes to hours) and achievable using a desktop computer.

Alaska, Florida, Massachusetts, Washington↗
USGS2024

Earthquake effects surveyed during the nineteenth century as ecological features of Chinookan tidelands

Lasting effects of a Cascadia earthquake in 1700 were documented during surveys of Chinookan tidelands near the mouth of the Columbia River between 1805 and 1868. The effects resemble estuarine consequences, near Anchorage, of the 1964 Alaska earthquake: fatal drowning of subsided meadows and forests by post-earthquake tides, rebirth of marshes and forests through post-earthquake sedimentation, and uplift. Chinookan remains of killed forests were recorded by James Graham Cooper, John J. Lowell, and Cleveland Rockwell. Cooper, attached to a railroad survey and the Smithsonian Institution, wrote of redcedar stumps and trunks standing dead in tidal marshes of Shoalwater (now Willapa) Bay. Two such snags served as bearing trees for Lowell as he platted a Shoalwater Bay township under contract with the General Land Office. Rockwell, of the US Coast Survey, flecked landward edges of tidal flats west of Astoria with symbols that evoke remains of a bygone spruce forest. The Lewis and Clark Expedition, while in that area in 1805–1806, mapped and puzzled over tideland vegetation that post-1700 succession helps explain.

Alaska, British Columbia, California, Oregon, Wash↗
USGS2026

Utilizing hydrophones to detect streambed mobilization in the Wild and Scenic reach of the Rio Chama

This paper describes a study that deployed underwater acoustic sensors (hydrophones) to detect streambed mobilization in the Wild and Scenic reach of the Rio Chama, New Mexico. Fine sediment accumulation in the gravel‑cobble bed affects brown trout spawning habitat, and understanding incipient motion thresholds is essential for planning effective environmental flushing flows released from El Vado Dam. Two hydrophone stations were operated during 2021–2022, capturing audio data during a high‑flow pulse in late 2021. Acoustic processing techniques, including spectral analysis and threshold‑based impact detection, were used to identify sediment‑generated noise associated with coarse sediment transport. Results indicate detectable sediment mobilization during the high‑flow pulse, demonstrating hydrophones’ potential as a passive monitoring tool for environmental flow planning and sediment‑management decision support.

Conference Paper↗
USGS1993

Hydraulic properties of the Madison aquifer system in the western Rapid City area, South Dakota

Available information on hydrogeology, data from borehole geophysical logs, and aquifer tests were used to determine the hydraulic properties of the Madison aquifer. From aquifer-test analysis, transmissivity and storage coefficient were determined for the Minnelusa and Madison aquifers, and vertical hydraulic conductivity (K v ') along with specific storage (Ss') for the Minnelusa confining bed. Borehole geophysical well logs were used to determine the thickness and location of the Minnelusa aquifer, the lower Minnelusa confining bed, and the Madison aquifer within the Madison Limestone. Porosity values determined from quantitative analysis of borehole geophysical well logs were used in analyzing the aquifer-test data. The average porosity at the two aquifer-test sites is about 10 percent in the Minnelusa aquifer, 5 percent in the lower Minnelusa confining bed, and 35 percent in the Madison aquifer. The first aquifer test, which was conducted at Rapid City production well #6, produced measured drawdown in the Minnelusa and Madison aquifers. Neuman and Witherspoon's method of determining the hydraulic properties of leaky two-aquifer systems was used to evaluate the aquifer-test data by assuming the fracture and solution-opening network is equivalent to a porous media. Analysis of the aquifer test for the Minnelusa aquifer yielded a transmissivity value of 12,000 feet squared per day and a storage coefficient of 3 x 10 -3 . The specific storage of the Minnelusa confining bed was 2 x 10 -7 per foot, and its vertical hydraulic conductivity was 0.3 foot per day. The transmissivity of the Madison aquifer at this site was 17,000 feet squared per day, and the storage coefficient was 2 x 10 -3 . The second aquifer test, which was conducted at Rapid City production well #5 (RC-5) produced measured drawdown only in the Madison aquifer. Hantush and Jacob's method of determining the hydraulic properties of leaky confined aquifers with no storage in the confining bed was used to evaluate the aquifer-test data by assuming the fracture and solution-opening network is equivalent to a porous media. The analysis of data from the RC-5 aquifer test showed that transmissivity was not equal in all directions. Hantush's method was used to determine the direction of radial anisotropy and magnitude of the major and minor axes of transmissivity. The major axis of transmissivity is at an angle of 42° east of north, and the transmissivity along this axis is about 56,000 feet squared per day. The minor axis of transmissivity is at an angle of 48° west of north, and the transmissivity along this axis is about 1,300 feet squared per day. The major axis of transmissivity intersects Cleghorn Springs, a large resurgent spring on the west edge of Rapid City. The shape of the potentiometric contours of the Madison aquifer near RC-5 agree with the orientation of the transmissivity ellipse. The average value of the storage coefficient from the isotropic analysis of the aquifer-test data was 3.5 x 10 -4 , and the average vertical hydraulic conductivity of the lower Minnelusa confining bed was 9.6 x 10 -3 foot per day.

South Dakota↗
USGS2026

Stream sediment sources in Medicine Creek, northern Missouri and southern Iowa

This report presents the results of a cooperative study by the U.S. Geological Survey and Missouri Department of Natural Resources to quantify sediment transport source contributions in the Medicine Creek drainage basin. Understanding relative source contributions provides valuable information for selecting the conservation practices that may be most effective in reducing sediment and sediment-associated nutrient transport in the Medicine Creek drainage basin and similar areas of the Lower Grand River drainage basin. Sediment samples were collected from potential contributing areas (source samples) and from fluvial-transported samples (target samples). Source sample types included streambanks, row crop fields, and a combined pastures and forests category. Samples were analyzed for particle size and quantity of carbon, nitrogen, stable isotopes of carbon and nitrogen, and 49 mineral elements as potential tracers. Results for the carbon stable isotope ratio of carbon-13/carbon-12 (δ 13 C) and concentrations of total carbon, total nitrogen, calcium, potassium, and copper were selected by discriminant function analysis as the best combination of multiple tracers to differentiate each source type. The discriminant function analysis poorly differentiated pastures and forests, so these source types were combined. The sources defined by the discriminant function analysis were then used in an unmixing model to apportion sources for each target sample. In the study area, transported sediment was predominantly bank sediment, with an overall average of 86.9 percent of suspended-sediment samples and depositional streambed samples attributed to bank material. Suspended-sediment samples from the mainstem of Medicine Creek were dominated by bank sediments (average of 95.8 percent), and depositional streambed samples from throughout the drainage basin had more variable source contributions with an average of 71.1 percent attributed to bank material. The relative importance of upland sources (row crop fields and the combined pastures and forests category) varied seasonally and with streamflow but was not related to land use or drainage basin size. Relative contributions from upland sources were greater in the summer through winter rather than spring and during lower streamflow, though this may be driven by the seasonality of streamflow. These results indicate management practices that reduce bank erosion could be effective strategies for managing the dominant source of sediment and sediment-associated phosphorus.

Iowa, Missouri↗
USGS1998

Transmissivity and water quality of water-producing zones in the intermediate aquifer system, Sarasota County, Florida

The intermediate aquifer system is an important water source in Sarasota County, Florida, because the quality of water in it is usually better than that in the underlying Upper Floridan aquifer. The intermediate aquifer system consists of a group of up to three water-producing zones separated by less-permeable units that restrict the vertical movement of ground water between zones. The diverse lithology, that makes up the intermediate aquifer system, reflects the variety of depositional environments that occurred during the late Oligocene and Miocene epochs. Slight changes in the depositional environment resulted in aquifer heterogeneity, creating both localized connection between water-producing zones and abrupt culmination of water-producing zones that are not well documented. Aquifer heterogeneity results in vertical and areal variability in hydraulic and water-quality properties. The uppermost water-producing zone is designated producing zone 1 but is not extensively used because of its limited production capability and limited areal extent. The second water-producing zone is designated producing zone 2, and most of the domestic- and irrigation-supply wells in the area are open to this zone. Additionally, producing zone 2 is utilized for public supply in southern coastal areas of Sarasota County. Producing zone 3 is the lowermost and most productive water-producing zone in the intermediate aquifer system. Public-supply well fields serving the cities of Sarasota and Venice, as well as the Plantation and Mabry Carlton Reserve well fields, utilize producing zone 3. Heads within the intermediate aquifer system generally increase with aquifer depth. However, localized head-gradient reversals occur in the study area, coinciding with sites of intense ground-water withdrawals. Heads in producing zones 1, 2, and 3 range from 1 to 23, 0.2 to 34, and 7 to 42 feet above sea level, respectively. Generally, an upward head gradient exists between producing zones 3 and 2. However, an upward head gradient between producing zones 2 and 1 does not consistently occur throughout Sarasota County, probably the result of greater ground-water withdrawals from producing zone 2 than from producing zone 1. The transmissivity of the intermediate aquifer system is spatially variable. Specific-capacity data from selected wells penetrating producing zones 2 and 3, were used to estimate transmissivity. Estimated transmissivity values for producing zones 2 and 3 range from about 100 to 26,000 feet squared per day and from about 1,300 to 6,200 feet squared per day, respectively. Because the capacity of specific water-producing zones is highly variable from site to site, estimating the performance of a specific water-producing zone as a water resource is difficult. Water samples collected during the study were analyzed for major-ion concentrations. Generally, bicarbonate type water from rock interaction occurs in northern Sarasota County; enriched calcium-magnesium-sulfate type water from deeper aquifers occurs in central Sarasota County; and sodium-chloride type water from saltwater mixing occurs in southern Sarasota County. In some areas of northern Sarasota County, the major-ion concentrations in water are lower in producing zone 2 than in producing zone 1. Major-ion concentrations in water are higher in producing zone 3 throughout the study area. A major objective of the study was to evaluate hydraulic and water-quality data to determine distinctions that could be used to characterize a particular producing zone. However, data indicate that both hydraulic and water-quality properties are highly variable within and between zones, and are more related to the degree of connection between and areal extent of water-producing zones than to aquifer depth and distance from the coast.

Florida↗
USGS2025

Geochemistry of quartz and fluid inclusions associated with gold, tungsten, and antimony in the Stibnite-Yellow Pine district, Idaho

Deposits in the historic Stibnite-Yellow Pine district in east-central Idaho were mined for Ag, Au, Hg, Sb, and W. Ore is hosted in breccia and fault zones along NE-striking faults that transect the Atlanta lobe of the Late Cretaceous Idaho batholith and metamorphosed Neoproterozoic to lower Paleozoic rocks. Geochronological studies have delineated five superimposed and zoned hydrothermal events in the mining district which range in age from Late Cretaceous to the Eocene. They formed the following consecutive assemblages: (1) vein and disseminated pre-ore milky quartz (± calcite), muscovite, and brassy pyrite with minor molybdenite and base metal sulfides; (2) vein and disseminated quartz, calcite, sericite, auriferous-pyrite, and arsenopyrite; (3) potassium feldspar, quartz, dolomite, and calcite with vein and disseminated scheelite ± pyrite and arsenopyrite; (4) Au-Ag veins that contain adularia; and (5) breccia, vein, and disseminated quartz, calcite, and stibnite with minor Ag sulfosalts and distal zones of cinnabar and realgar at Fern and Hermes mines. In this study, the pressure, temperature, and composition of ore-forming fluids were measured in Au-, W-, and Sb-bearing samples collected from drill core and surface exposures. Using optical petrography, scanning electron microscopy cathodoluminescence (SEM-CL) and electron microprobe cathodoluminescence (EMPA-CL) imaging, as well as electron microprobe (EMP) and laser ablation-inductively coupled plasma-mass spectrometry trace element analyses, four major overprinting generations of hydrothermal quartz are defined. Fluid inclusion assemblages (FIAs) in each generation of quartz were characterized by microthermometry and laser Raman spectroscopy. Quartz and fluid inclusion paragenesis are as follows: (Qi) altered and overprinted Qi with no coeval FIAs that formed before or during event 1; (Q1) early veins as well as disseminated quartz with dull gray SEM-CL and H 2 O-NaCl-CO 2 FIAs that formed at minimum temperatures and pressures of 281° to 358°C and 1346 to 1789 bar during event 2 (Au); (Q2) vein and disseminated quartz, often euhedral, with H 2 O-NaCl ± CO 2 ± CH 4 FIAs that formed at minimum temperatures and pressures of 183° to 213°C and 72 to 602 bar during event 3 (W); and (Q3) euhedral and disseminated quartz with H 2 O-NaCl FIAs that formed at minimum temperature and pressures of 156° to 161°C and 5 to 6 bar during event 5 (Sb). Stibnite hosts H 2 O-NaCl FIAs trapped at minimum temperatures and pressures of 150° to 189°C and 5 to 12 bar that are similar to those of Q3-hosted FIAs. The quartz paragenetic history in the district follows a progressive temporal path from Tienriched quartz deposited by a relatively deep and higher temperature aqueous-carbonic fluid to a Li, Al, and Sb enriched quartz precipitated from a lower temperature aqueous fluid. Gases in fluid inclusion extracts from ore and gangue minerals were analyzed by mass spectrometry. Noble gas isotope analysis of fluid inclusion extracts revealed three signatures. Pre-ore Qi has R/R A (the isotopic ratio of the sample 3 He/ 4 He to atmospheric 3 He/ 4 He (1.384 × 10 −6 )) values that reflect the composition of the crustal melt-derived Atlanta lobe of the Idaho batholith. Quartz (Q1) and auriferous arsenian pyrite of hydrothermal event 2 have 20 Ne/ 4 He and R/R A values that plot along the air-crust mixing line, and these gases were likely introduced by metamorphic fluids derived from metasedimentary rocks. Stibnite with associated quartz (Q3 ± Q2) have 20 Ne/ 4 He and R/R A values that extend from the air-crust mixing line to the air-mantle mixing line, showing a shift from a crustal signature to an overprinting mantle signature. Late calcite has 20 Ne/ 4 He and R/R A values that extend from air toward the mantle end member, which suggests that magmatic volatiles condensed into meteoric groundwater late in the paragenesis. A mantle volatile source is also supported by high 20 Ne/ 22 Ne ratios. The Stibnite-Yellow Pine district is similar to other Au-W-Sb districts around the world in ore fluid chemistries, with late-stage stibnite being a product of cooling. The fluid pressure-temperature-composition (P-T-X) estimates and the crustal source of He during hydrothermal event 2 gold mineralization are characteristic of orogenic Au deposits, and the observed inclusion reequilibration textures indicate that trapped fluid inclusions were deformed during transitions between the brittle-ductile environment. Scheelite was deposited during event 3 with Q2 quartz and is overgrown by Q3 quartz and stibnite. Our interpretation of the quartz texture, chemistry, and fluid inclusion P-T-X data suggest that Au, W, and Sb mineralization occurred as hydrothermal fluids evolved from H 2 O-NaCl-CO 2 at >300°C and depths of ~4 to 6 km near the ductile to brittle transition to H 2 O-NaCl at ~150°C and epithermal depths as the Idaho batholith was exhumed. Geochronology indicates that from the Late Cretaceous to early Eocene, overprinting hydrothermal events formed deep orogenic Au, intermediate W, and shallow epithermal Au-Ag and Sb. Without comprehensive geochronologic constraints, our fluid inclusion data and textural observations could be interpreted as a single evolving hydrothermal system, as has been done in many other mining districts with similar mineralization.

Idaho↗
USGS2000

Water-quality conditions and relation to drainage-basin characteristics in the Scituate Reservoir Basin, Rhode Island, 1982-95

The Scituate Reservoir Basin covers about 94 square miles in north central Rhode Island and supplies more than 60 percent of the State of Rhode Island's drinking water. The basin includes the Scituate Reservoir Basin and six smaller tributary reservoirs with a combined capacity of about 40 billion gallons. Most of the basin is forested and undeveloped. However, because of its proximity to the Providence, Rhode Island, metropolitan area, the basin is subject to increasing development pressure and there is concern that this may lead to the degradation of the water supply. Selected water-quality constituent concentrations, loads, and trends in the Scituate Reservoir Basin, Rhode Island, were investigated locate parts of the basin likely responsible for exporting disproportionately large amounts of water-quality constituents to streams, rivers, and tributary reservoirs, and to determine whether water quality in the basin has been changing with time. Water-quality data collected between 1982 and 1995 by the Providence Water Supply Board PWSB) in 34 subbasins of the Scituate Reservoir Basin were analyzed. Subbasin loads and yields of total coliform bacteria, chloride, nitrate, iron, and manganese, estimated from constituent concentrations and estimated mean daily discharge records for the 1995 water year, were used to determine which subbasins contributed disproportionately large amounts of these constituents. Measurements of pH, color, turbidity, and concentrations of total coliform bacteria, sodium, alkalinity, chloride, nitrate, orthophosphate, iron, and manganese made between 1982 and 1995 by the PWSB were evaluated for trends. To determine the potential effects of human-induced changes in drainage- basin characteristics on water quality in the basin, relations between drainage-basin characteristics and concentrations of selected water-quality constituents also were investigated. Median values for pH, turbidity, total coliform bacteria, sodium, alkalinity, chloride, nitrate, and iron were largest in subbasins with predominately residential land use. Median instantaneous loads reflected drainage-basin size. However, loads normalized by drainage area (median instantaneous yields) also were largest in residential areas where point and non-point sources are likely, and in areas of poorly drained soils. Significant trends in water-quality constituents from 1982 to 1995 in the Scituate Reservoir Basin indicate that the quality of the water resources in the basin may be slowly changing. Scituate Reservoir subbasins with large amounts of residential land use showed increasing trends in alkalinity and chloride. In contrast, subbasins distributed throughout the drainage basin showed increasing trends in pH, color, nitrate, and iron concentrations, indicating that these characteristics and constituents may be affected more by atmospheric deposition. Although changing, water-quality constituent concentrations in the Scituate Reservoir Basin only occasionally exceeded Rhode Island and USEPA water-quality guidelines and standards. Result of correlation analysis between pH, color, turbidity, and concentrations total coliform bacteria, sodium, alkalinity, chloride, nitrate, orthophosphate, iron, and manganese and land use, geology, wetlands, slope, soil drainability, and roads indicated that the percentage of wetlands, roads, and slope appear have the greatest effect on water-quality in the Scituate Reservoir Basin. The percentage of urban, residential, and commercial land use also are important, but to a lesser degree than wetlands, roads, and slope. Finally, geology appears to have the least effect on water quality compared to other drainage-basin characteristics investigated.

Rhode Island↗
USGS2025

Seismic response of rock towers at the Trona Pinnacles (U.S.A.) to the 2019 Ridgecrest earthquake sequence: Theory, observations, and models

We analyze the seismic response of a class of fragile geologic features (FGFs), referred to as rock towers (RTs) at the Trona Pinnacles, a group of RTs in southern California that suffered strong shaking during the 2019 Ridgecrest earthquake sequence. FGFs, including RTs, may provide maximum constraints on past earthquake shaking intensity, and thereby support probabilistic seismic hazard assessments (PSHAs). In a rare case study, we explore the hypothesis that RT structural integrity is time dependent, as damage accumulates progressively. We develop finite‐element method (FEM) models of the RTs using photogrammetric shape models. We validate the models by comparing numerical simulations of their response to broadband ground shaking with low‐intensity seismic recordings obtained at the Pinnacles. Results of our simulations are in good agreement with the seismic recordings of actual earthquake aftershocks. We next use the results of the FEM models to analyze the response and evolution of RTs. Our analyses elucidate the influence of geometry over their seismic response, providing a rationale that may explain the rarity of slender RTs at Trona: high‐aspect‐ratio structures that respond in bending develop detrimental tensile stresses that crack the rock, whereas low‐aspect‐ratio ones’ response also includes shearing, which does not compromise material integrity as much as tension. Field measurements with a rebound hammer support this finding, suggesting that the material around the base of slender rocks has been weakened relative to other parts of the RT. We also study how to define simplified mechanical models (“archetypes”) to predict the natural frequencies of RTs. Results from our work illuminate the fundamental mechanisms of seismic response and progressive failure of RTs, and open new avenues of research to potentially incorporate these geologic features as long‐return period constraints on PSHA, in ways analogous to those of the widely used precariously balanced rocks.

California↗
USGS2026

Flood-inundation maps of the Blue River and major tributaries in and near Kansas City, Missouri, 2023–25

Digital flood-inundation maps for 35.5 miles of the Blue River, in and near Kansas City, Missouri, were created by the U.S. Geological Survey (USGS) in cooperation with the City of Kansas City. Maps were also developed for a combined 7.3 miles of Brush Creek (4.4 miles) and Indian Creek (2.9 miles), two primary tributaries to the Blue River in the study reach. The flood-inundation maps, available through the USGS Flood Inundation Mapping Program website at https://water.usgs.gov/osw/flood_inundation/ , depict estimates of the areal extent and depth of flooding, depth of water above first-floor elevations in selected buildings, water velocity, water-surface elevations, and time of travel corresponding to selected water levels or gage heights (hereafter referred to as “stages”) at nine reference USGS streamgages—five on the Blue River (USGS station numbers 06893590, 06893578, 06893500, 06893150, and 06893100), two on Brush Creek (USGS station numbers 06893562 and 06893557), one on Indian Creek (USGS station number 06893390), and one on the Missouri River (USGS station number 06893000). Near-real-time stages at these streamgages may be obtained from USGS Water Data for the Nation at https://doi.org/10.5066/F7P55KJN or the National Weather Service National Water Prediction Service at http://water.noaa.gov/ , which also forecasts flood hydrographs at seven of these sites (USGS station numbers 06893000, 06893590, 06893578, 06893500, 06893150, 06893557, and 06893390). Flood profiles were computed for eight map reaches by means of two-dimensional hydraulic models. The models were calibrated using the USGS-developed stage–streamflow relations at each reference streamgage. Two map reaches on the lower Blue River also include the effects of backwater from the Missouri River on flood inundation extent and hydraulic characteristics. The hydraulic models were used to compute water-surface profiles for flood stages at 1-foot intervals referenced to the streamgage datums. The profile stages ranged from the National Weather Service “Action Stage” or near bankfull to a stage exceeding the highest recorded water level at each streamgage. The simulated water-surface profiles were then combined with a digital elevation model (derived from light detection and ranging data having a nonvegetated vertical accuracy of a maximum 10-centimeter root-mean-square error) to delineate the area flooded at each water level and the associated hydraulic characteristics. The availability of these maps, along with information regarding current stage from the USGS streamgage and forecasted high-flow stages from the National Weather Service, will provide emergency management personnel, resource managers, and residents with information that could be critical for flood-response activities such as evacuations and road closures, as well as for postflood recovery efforts.

Kansas, Missouri↗
USGS2024

A multidisciplinary approach that considers occurrence, geochemistry, bioavailability, and toxicity to prioritize critical minerals for environmental research

Critical minerals (or critical elements) are minerals or elements that are essential to global security and development and have supply chains vulnerable to disruption. In general, knowledge of the environmental behavior and health effects of critical elements is needed to support the development of safe and environmentally responsible supplies. This knowledge includes identifying potential consequences of increased critical element production and use, alternative critical element sources such as mine wastes, and adverse effects of critical elements on ecosystem condition and organismal health. Here we identify significant data gaps in the understanding of critical elements in surficial and aquatic environments, and the need, given the large number of commodities (50) identified on the 2022 critical minerals list for the United States, for an approach to prioritize them for study of their environmental fate and effects. We propose a multidisciplinary approach for this prioritization, considering measures of occurrence, geochemistry, bioavailability, and toxicity. We describe relatively easy-to-obtain metrics for each of these topic areas and demonstrate the utility of this integrated prioritization approach using indium and zinc as examples. This approach facilitates prioritizing research with a focus on those critical elements that are most mobile in the environment, bioavailable, toxic, or simply lacking data in these categories.

Environmental Science & Technology↗