USGS Science⌕ Search

SEARCH · USGS Science

Results for “Energy Sources”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 811 records · Page 45Linked to original sources
USGS2005

Parental nest defense on videotape: More reality than "myth"

Predation is recognized as the primary source of nest mortality in most passerine species (e.g. Ricklefs 1969, Martin 1992a); thus, it is no surprise that parental nest defense has received considerable scientific attention (see below). By nest defense, we refer to any parental behavior that decreases the probability that a predator (or brood parasite) will harm the nest contents and that simultaneously entails some cost to the bird engaged in the behavior—either by increasing the bird's risk of injury or death (Montgomerie and Weatherhead 1988) or by at least increasing its expenditure of time and energy (Buitron 1983).

The Auk↗
USGS2016

Resource waves: phenological diversity enhances foraging opportunities for mobile consumers

Time can be a limiting constraint for consumers, particularly when resource phenology mediates foraging opportunity. Though a large body of research has explored how resource phenology influences trophic interactions, this work has focused on the topics of trophic mismatch or predator swamping, which typically occur over short periods, at small spatial extents or coarse resolutions. In contrast many consumers integrate across landscape heterogeneity in resource phenology, moving to track ephemeral food sources that propagate across space as resource waves. Here we provide a conceptual framework to advance the study of phenological diversity and resource waves. We define resource waves, review evidence of their importance in recent case studies, and demonstrate their broader ecological significance with a simulation model. We found that consumers ranging from fig wasps ( Chalcidoidea) to grizzly bears ( Ursus arctos ) exploit resource waves, integrating across phenological diversity to make resource aggregates available for much longer than their component parts. In model simulations, phenological diversity was often more important to consumer energy gain than resource abundance per se. Current ecosystem-based management assumes that species abundance mediates the strength of trophic interactions. Our results challenge this assumption and highlight new opportunities for conservation and management. Resource waves are an emergent property of consumer–resource interactions and are broadly significant in ecology and conservation.

Ecology↗
USGS1982

Geochemical reconnaissance for uranium occurrences in the Notch Peak intrusive area, House Range, Millard County, Utah

Samples collected from the contact metamorphic zone of the Notch Peak intrusive area, House Range, Millard County, Utah, indicate the occurrence of low-grade uranium and thorium ore. Maximum abundances in the altered mineralized rocks in the contact zone are 450 ppm uranium and 480 ppm thorium. Interpretation of factor analysis of the spectrochemical and delayed neutron analytical data suggests the presence of five geological factors which account for 82 percent of element covariance of 34 elements in 61 samples. The factors are identified as (1) limestone source rock reactions; (2) monzonite source rock reactions; (3) hydrothermal element group 1; (4) rare earth group; and (5) hydrothermal element group 2. The last factor effects the distribution of, primarily, beryllium, uranium, copper, molybdenum, tungsten, niobium, and secondarily, thorium, tin, and zinc; it is identified as the prime mineralization factor. The Notch Peak intrusive area has been a tungsten producing area since before the 1940's and the location of small-scale gold placer operations. This reconnaissance study was a 'follow-up' of uranium anomaly data which were developed during the U.S. Dept. of Energy National Uranium Resource Evaluation (NURE) program in 1978-80.

Open-File Report↗
USGS2019

Evaluation of chemical and hydrologic processes in the eastern Snake River Plain Aquifer based on results from geochemical modeling, Idaho National Laboratory, eastern Idaho

Nuclear research activities at the U.S. Department of Energy (DOE) Idaho National Laboratory (INL) produced liquid and solid chemical and radiochemical wastes that were disposed to the subsurface resulting in detectable concentrations of some waste constituents in the eastern Snake River Plain (ESRP) aquifer. These waste constituents may affect the water quality of the aquifer and may pose risks to the eventual users of the aquifer water. To understand these risks to water quality the U.S. Geological Survey, in cooperation with the DOE, conducted geochemical mass-balance modeling of the ESRP aquifer to improve the understanding of chemical reactions, sources of recharge, mixing of water, and groundwater flow directions in the shallow (upper 250 feet) aquifer at the INL. Modeling was conducted using the water chemistry of 127 water samples collected from sites at and near the INL. Water samples were collected between 1952 and 2017 with most of the samples collected during the mid-1990s. Geochemistry and isotopic data used in geochemical modeling consisted of dissolved oxygen, carbon dioxide, major ions, silica, aluminum, iron, and the stable isotope ratios of hydrogen, oxygen, and carbon. Geochemical modeling results indicated that the primary chemical reactions in the aquifer were precipitation of calcite and dissolution of plagioclase (An 60 ) and basalt volcanic glass. Secondary minerals other than calcite included calcium montmorillonite and goethite. Reverse cation exchange, consisting of sodium exchanging for calcium on clay minerals, occurred near site facilities where large amounts of sodium were released to the ESRP aquifer in wastewater discharge. Reverse cation exchange acted to retard the movement of wastewater-derived sodium in the aquifer. Regional groundwater inflow was the primary source of recharge to the aquifer underlying the Northeast and Southeast INL Areas. Birch Creek (BC), the Big Lost River (BLR), and groundwater from BC valley provided recharge to the North INL Area, and the BLR and groundwater from BC and Little Lost River (LLR) valleys provided recharge to the Central INL Area. The BLR, groundwater from the BLR and LLR valleys and the Lost River Range, and precipitation provided recharge to the Northwest and Southwest INL Areas. The primary source of recharge west and southwest of the INL was groundwater inflow from BLR valley. Upwelling geothermal water was a small source of recharge at two wells. Aquifer recharge from surface water in the northern, central, and western parts of the INL indicated that the aquifer in these areas was a dynamic, open system, whereas the aquifer in the eastern part of the INL, which receives little recharge from surface water, was a relatively static and closed system. Sources of recharge identified from isotope ratios and geochemical modeling (major ion concentrations) were nearly identical for the North, Northeast, Southeast, and Central INL Areas, which indicated that both methods probably accurately identified the sources of recharge in these areas. Conversely, isotope ratios indicated that the BLR and groundwater from the LLR valley provided most recharge to the western parts of the Northwest and Southwest INL Areas, whereas geochemical modeling results indicated a smaller area of recharge from the BLR and groundwater from the LLR valley, a larger area of recharge from the Lost River Range, and recharge of groundwater from the BLR valley that extended to the west INL boundary. The results from geochemical modeling probably were more accurate because major ion concentrations, but not isotope ratios, were available to characterize groundwater from the BLR valley and the Lost River Range. Sources of recharge identified with a groundwater flow model (using particle tracking) and geochemical modeling were similar for the Northeast and Southeast INL Areas. However, differences between the models were that the geochemical model represented (1) recharge of groundwater from the Lost River Range in the western part of the INL, whereas the flow model did not, (2) recharge of groundwater from the BC and BLR valleys extending farther south and east, respectively, than the flow model, and (3) more recharge from the BLR in the Southwest INL Area than the flow model. Mixing of aquifer water beneath the INL included (1) mixing of regional groundwater and water from the BC valley in the Northeast and Southeast INL Areas and (2) mixing of surface water (primarily from the BLR) and groundwater across much of the North, Central, Northwest, and Southwest INL Areas. Localized recharge from precipitation mixed with groundwater in the Northwest and Southwest INL Areas, and localized upwelling geothermal water mixed with groundwater in the Central and Northeast INL Areas. Flow directions of regional groundwater were south in the eastern part of the INL and south-southwest at downgradient locations. Groundwater from the BC and LLR valleys initially flowed southeast before changing to south-southwest flow directions that paralleled regional groundwater, and groundwater from the BLR valley initially flowed south before changing to a southsouthwest direction. Wastewater-contaminated groundwater flowed south from the Idaho Nuclear Technology and Engineering Center (INTEC) infiltration ponds in a narrow plume, with the percentage of wastewater in groundwater decreasing due to dilution, dispersion, and (or) degradation from about 60‒80 percent wastewater 0.7‒0.8 mile (mi) south of the INTEC infiltration ponds to about 1.4 percent wastewater about 15.5 mi south of the INTEC infiltration ponds. Wastewater contaminated groundwater flowed southeast and then southwest from the Naval Reactors Facility industrial waste ditch, with the percentage of wastewater in groundwater decreasing from about 100 percent wastewater adjacent to the waste ditch to about 2 percent wastewater about 0.6 mi south of the waste ditch.

Idaho↗
USGS2006

Evaporation from Lake Mead, Arizona and Nevada, 1997-99

Lake Mead is one of a series of large Colorado River reservoirs operated and maintained by the Bureau of Reclamation. The Colorado River system of reservoirs and diversions is an important source of water for millions of people in seven Western States and Mexico. The U.S. Geological Survey, in cooperation with the Bureau of Reclamation, conducted a study from 1997 to 1999 to estimate evaporation from Lake Mead. For this study, micrometeorological and hydrologic data were collected continually from instrumented platforms deployed at four locations on the lake, open-water areas of Boulder Basin, Virgin Basin, and Overton Arm and a protected cove in Boulder Basin. Data collected at the platforms were used to estimate Lake Mead evaporation by solving an energy-budget equation. The average annual evaporation rate at open-water stations from January 1998 to December 1999 was 7.5 feet. Because the spatial variation of monthly and annual evaporation rates was minimal for the open-water stations, a single open-water station in Boulder Basin would provide data that are adequate to estimate evaporation from Lake Mead.

Scientific Investigations Report↗
USGS2023

Application of a catch multiple survey analysis for Atlantic horseshoe crab Limulus polyphemus in the Delaware Bay

Objective This paper applies a catch multiple survey analysis (CMSA) to Atlantic horseshoe crabs Limulus polyphemus in the Delaware Bay to generate robust population estimates for harvest management. Currently, horseshoe crabs along the U.S. Atlantic coast are harvested as bait for other fisheries and collected for their blood, which is used in a biomedical industry. The Delaware Bay is home to the largest population of horseshoe crabs and is a significant stopover for shorebirds to rebuild energy by consuming horseshoe crab eggs prior to completing their northward migration. To address this interrelationship, the Adaptive Resource Management (ARM) Framework has been used since 2013 to ensure that horseshoe crab harvest within the region takes into account the forage needs of migratory birds. Since its inception, the ARM Framework has used a single trawl survey's swept area-based population estimates of horseshoe crab relative abundance and a theoretical population model developed primarily from literature-derived values. With more data collected in the region in recent years and other sources of mortality that can now be quantified, a catch survey model can provide horseshoe crab population estimates going forward. Methods A CMSA was used to estimate male and female horseshoe crab population size for 2003–2021 using all quantifiable sources of mortality and three fishery-independent indices of abundance. Result The CMSA results indicated that adult abundance of male and female horseshoe crabs was stable from 2003 to 2013 and then began to increase through 2017, a result that is consistent with stock rebuilding following a period of harvest restrictions as recommended by the ARM Framework. Population estimates were lower in recent years but remained above the levels estimated before implementation of the ARM Framework. In 2021, the CMSA estimated that there were over 6 million mature females and nearly 16 million mature male horseshoe crabs in the region. Conclusion The CMSA provides the best and most comprehensive population estimates of horseshoe crabs in Delaware Bay and will improve modeling efforts within the ARM Framework going forward.

Delaware, Maryland, New Jersey↗
USGS2021

Influence of antecedent geology on the Holocene formation and evolution of Horn Island, Mississippi, USA

Horn Island, one of the two most stable barriers along the Mississippi-Alabama chain (Cat, East and West Ship, Horn, West Petit Bois, Petit Bois, and Dauphin), provides critical habitat, helps regulate estuarine conditions in the Mississippi Sound, and reduces wave energy and storm surge before they reach the mainland shore. However, important details of the formation and evolution of the island in response to sea-level rise, storms, and antecedent geology remain unclear. This study integrates 2200 km of high-resolution geophysical data, 35 sediment cores, and 18 radiocarbon ages to better understand the geologic history of the island. Incised valleys of the Biloxi and Pascagoula Rivers underlie Horn Island and played a profound role in the evolution of the system. Within the incised valleys, sandy paleochannel deposits represent potential sediment sources during island development. Scour associated with wave and tidal ravinement processes liberated sand from the paleochannels and along with numerous other sizable sand sources on the shelf contributed to the formation and continued maintenance of Horn Island. Based on radiocarbon ages, transgressive ephemeral islands/shoals with no preserved shoreface existed at least 8000 cal yr BP and were frequently overwashed when sea-level rise rates were ~ 4–5 mm/yr. Approximately 5000 cal yr BP, coinciding with a deceleration in sea-level rise to about 1.4 mm/yr and attendant increased sand supply, radiocarbon ages associated with Horn Island's barrier complex and lower shoreface indicate a period of island stabilization. Seismic and sediment core data show a long history of westward lateral migration by longshore currents through tidal ravinement and inlet fill. Subsurface sand packages associated with tidal inlet fill and paleochannels are available for ravinement and may be important sand sources for Horn Island to maintain subaerial exposure with the expected accelerated future sea-level rise.

Mississippi↗
USGS2003

Aggradation of gravels in tidally influenced fluvial systems: Upper Albian (Lower Cretaceous) on the cratonic margin of the North American Western Interior foreland basin

Alluvial conglomerates were widely distributed around the margin of the Early Cretaceous North American Cretaceous Western Interior Seaway (KWIS). Conglomerates, sandstones, and lesser amounts of mudstones of the upper Albian Nishnabotna Member of the Dakota Formation were deposited as fill-in valleys that were incised up to 80 m into upper Paleozoic strata. These paleovalleys extended southwestward across present-day northwestern Iowa into eastern Nebraska. Conglomerate samples from four localities in western Iowa and eastern Nebraska consist mostly of polycrystalline quartz with lesser amounts of microcrystalline (mostly chert), and monocrystalline quartz. Previous studies discovered that some chert pebbles contain Ordovician-Pennsylvanian invertebrate fossils. The chert clasts analyzed in this study were consistent with these findings. In addition, we found that non-chert clasts consist of metaquartzite, strained monocrystalline quartz and 'vein' quartz from probable Proterozic sources, indicating that parts of the fluvial system's sediment load must have travelled distances of 400-1200 km. The relative tectonic stability of this subcontinent dictated that stream gradients were relatively low with estimates ranging from 0.3 to 0.6 m/km. Considering the complex sedimentologic relationships that must have been involved, the ability of low-gradient easterly-sourced rivers to entrain gravel clasts was primarily a function of paleodischarge rather than a function of steep gradients. Oxygen isotopic evidence from Albian sphaerosiderite-bearing paleosols in the Dakota Formation and correlative units from Kansas to Alaska suggest that mid-latitude continental rainfall in the Albian was perhaps twice that of the modern climate system. Hydrologic fluxes may have been related to wet-dry climatic cycles on decade or longer scales that could account for the required water supply flux. Regardless of temporal scale, gravels were transported during 'high-energy' pulses, under humid climatic conditions in large catchment areas. An overall rising sea level during the late Albian created accommodation space for the gravelly lithofacies equivalent to the Kiowa-Skull Creek rocks. As Western Interior sea level rose, regional stream gradients were reduced, resulting in regional fluvial aggradation. The conglomeratic lower parts of the Nishnabotna Member of the Dakota Formation formed the transgressive systems tract within an upper Albian sequence that is defined by two unconformities that can be traced from marine Kiowa strata in western Kansas northeastward into western Iowa (Brenner et al., 2000). Mud-draped cross-bedded sandstone bodies, laminated mudstone intervals, and vertical burrows in the lower strata of the Nishnabotna Member indicate that estuarine conditions existed at the mouths of the river system, and tidal effects were transmitted at least 200 km inland from the interpreted late Albian coast. These observations suggest that estuarine conditions stepped up the incised valleys as fluvial sediments aggraded in response to regional transgression that continued through the Late Albian. ?? 2003 Elsevier Ltd. All rights reserved.

Cretaceous Research↗
USGS2022

Characteristics, relationships and precision of direct acoustic-to-seismic coupling measurements from local explosions

Acoustic energy originating from explosions, sonic booms, bolides and thunderclaps have been recorded on seismometers since the 1950s. Direct pressure loading from the passing acoustic wave has been modelled and consistently observed to produce ground deformations of the near surface that have retrograde elliptical particle motions. In the past decade, increased deployments of colocated seismometers and infrasound sensors have driven efforts to use the transfer function between direct acoustic-to-seismic coupling to infer near-surface material properties including seismic velocity structure and elastic moduli. In this study, we use a small aperture (≈600 m) array of broadband seismometers installed in different manners and depths in both granite and sedimentary overburden to understand the fundamental nature and repeatability of seismic excitation from 1 to 15 Hz using horizontally propagating acoustic waves generated by 97 local (2–10 km) explosions. In agreement with modelling, we find that the ground motions induced by acoustic-to-seismic coupling attenuate rapidly with depth. We confirm the modelled relation between acoustic and ground motion amplitudes, but show that within one acoustic wavelength, the uncertainty in the transfer coefficient between seismic and acoustic energy at a given seismic station increases linearly with separation distance between the seismic and acoustic sensor. We attribute this observation to the rapid decorrelation of the infrasonic wavefield across small spatial scales and recommend colocating seismic and infrasound sensors for use in studies seeking to invert for near-surface material properties. Additionally, contrary to acoustic-to-seismic coupling theory and prior observations, we find that seismometers emplaced in granite do not record retrograde elliptical particle motions in response to direct pressure loading. We rule out seismometer tilt effects as a likely source of this observations and suggest that existing models of acoustic-to-seismic excitation may be too simplistic for seismometers placed in high rigidity materials.

Geophysical Journal International↗
USGS2015

Barite: a case study of import reliance on an essential material for oil and gas exploration and development drilling

Global dependence on a limited number of countries for specific mineral commodities could lead to sudden supply disruptions for the United States, and barite is one such commodity. Analyses of barite supply amounts and sources for the United States are demonstrative of mineral commodities on which the country is import reliant. Mineral commodity trade flows can be analyzed more easily than import reliances for commodities in which U.S. domestic demand is primarily met by materials contained within manufactured products, as with the rare-earth elements in cellular phones and computers. Barite plays an essential role as a weighting material in drilling muds used in oil and gas drilling, primarily to prevent the explosive release of gas and oil during drilling. The Nation’s efforts to become more energy independent are based largely on the domestic oil and gas industry’s ability to explore and develop onshore and offshore fuel deposits. These activities include increased efforts by the United States to locate and recover oil and gas within unconventional deposits, such as those in the Bakken, Eagle Ford, and Marcellus Formations, using advanced drilling technologies. Domestic barite production was about 670,000 metric tons (t) in 2012, equivalent to about 20 percent of the domestic drilling industry’s barite demand. Mine production for the United States in 2012 was about one-third of what was produced in 1980. In 2012, barite imported from China was approximately 2.2 million t and comprised about 77 percent of total barite imports and about 70 percent of the barite used in domestic drilling. Barite from India (14 percent), Morocco (6 percent) and Mexico (2 percent) comprised the bulk of the remaining total import balance; drilling applications consumed nearly all barite imported from these three countries.

Scientific Investigations Report↗
USGS2014

Mapping habitat for multiple species in the Desert Southwest

Many utility scale renewable energy projects are currently proposed across the Mojave Ecoregion. Agencies that manage biological resources throughout this region need to understand the potential impacts of these renewable energy projects and their associated infrastructure (for example, transmission corridors, substations, access roads, etc.) on species movement, genetic exchange among populations, and species’ abilities to adapt to changing environmental conditions. Understanding these factors will help managers’ select appropriate project sites and possibly mitigate for anticipated effects of management activities. We used species distribution models to map habitat for 15 species across the Mojave Ecoregion to aid regional land-use management planning. Models were developed using a common 1 × 1 kilometer resolution with maximum entropy and generalized additive models. Occurrence data were compiled from multiple sources, including VertNet ( http://vertnet.org/ ), HerpNET ( http://www.herpnet.org ), and MaNIS ( http://manisnet.org ), as well as from internal U.S. Geological Survey databases and other biologists. Background data included 20 environmental covariates representing terrain, vegetation, and climate covariates. This report summarizes these environmental covariates and species distribution models used to predict habitat for the 15 species across the Mojave Ecoregion.

Mojave Ecoregion↗
USGS2012

Methods of practice and guidelines for using survey-grade global navigation satellite systems (GNSS) to establish vertical datum in the United States Geological Survey

Geodetic surveys have evolved through the years to the use of survey-grade (centimeter level) global positioning to perpetuate and post-process vertical datum. The U.S. Geological Survey (USGS) uses Global Navigation Satellite Systems (GNSS) technology to monitor natural hazards, ensure geospatial control for climate and land use change, and gather data necessary for investigative studies related to water, the environment, energy, and ecosystems. Vertical datum is fundamental to a variety of these integrated earth sciences. Essentially GNSS surveys provide a three-dimensional position x, y, and z as a function of the North American Datum of 1983 ellipsoid and the most current hybrid geoid model. A GNSS survey may be approached with post-processed positioning for static observations related to a single point or network, or involve real-time corrections to provide positioning "on-the-fly." Field equipment required to facilitate GNSS surveys range from a single receiver, with a power source for static positioning, to an additional receiver or network communicated by radio or cellular for real-time positioning. A real-time approach in its most common form may be described as a roving receiver augmented by a single-base station receiver, known as a single-base real-time (RT) survey. More efficient real-time methods involving a Real-Time Network (RTN) permit the use of only one roving receiver that is augmented to a network of fixed receivers commonly known as Continually Operating Reference Stations (CORS). A post-processed approach in its most common form involves static data collection at a single point. Data are most commonly post-processed through a universally accepted utility maintained by the National Geodetic Survey (NGS), known as the Online Position User Service (OPUS). More complex post-processed methods involve static observations among a network of additional receivers collecting static data at known benchmarks. Both classifications provide users flexibility regarding efficiency and quality of data collection. Quality assurance of survey-grade global positioning is often overlooked or not understood and perceived uncertainties can be misleading. GNSS users can benefit from a blueprint of data collection standards used to ensure consistency among USGS mission areas. A classification of GNSS survey qualities provide the user with the ability to choose from the highest quality survey used to establish objective points with low uncertainties, identified as a Level I, to a GNSS survey for general topographic control without quality assurance, identified as a Level IV. A Level I survey is strictly limited to post-processed methods, whereas Level II, Level III, and Level IV surveys integrate variations of a RT approach. Among these classifications, techniques involving blunder checks and redundancy are important, and planning that involves the assessment of the overall satellite configuration, as well as terrestrial and space weather, are necessary to ensure an efficient and quality campaign. Although quality indicators and uncertainties are identified in post-processed methods using CORS, the accuracy of a GNSS survey is most effectively expressed as a comparison to a local benchmark that has a high degree of confidence. Real-time and post-processed methods should incorporate these "trusted" benchmarks as a check during any campaign. Global positioning surveys are expected to change rapidly in the future. The expansion of continuously operating reference stations, combined with newly available satellite signals, and enhancements to the conterminous geoid, are all sufficient indicators for substantial growth in real-time positioning and quality thereof.

Techniques and Methods↗
USGS2018

The nitrogen window for arctic herbivores: plant phenology and protein gain of migratory caribou (Rangifer tarandus)

Terrestrial plants are often limited by nitrogen (N) in arctic systems, but constraints of N supply on herbivores are typically considered secondary to those of energy. We tested the hypothesis that forage N is more limiting than energy for arctic caribou by collecting key forages (three species of graminoids, three species of woody browse, and one genus of forb) over three summers in the migratory range of the Central Arctic Herd in Alaska from the Brooks Range to the Coastal Plain on the Arctic Ocean. We combined in vitro digestion and detergent extraction to measure fiber, digestible energy, and usable fractions of N in forages ( n = 771). Digestible energy content fell below the minimum threshold value of 9 kJ/g for one single forage group: graminoids, and only beyond 64–75 d from parturition (6 June), whereas all forages fell below the minimum threshold value for digestible N (1% of dry matter) before female caribou would have weaned their calves at 100 d from parturition. The window for digestible N was shortest for browse, which fell below 1% at 30–41 d from parturition, whereas digestible N contents of graminoids were adequate until 46–57 d from parturition. The low quality of browse as a source of N was also apparent from concentrations of available N (i.e., the N not bound to fiber) that were <1% at 72–80 d from parturition. The Coastal Plain may be favored by female caribou because available and digestible concentrations of N are not only greater than those on the Brooks Range, the window of usable N on the Coastal Plain extends the period of protein gain for females and their calves by 17 d. Conversely, inland areas with greater biomass and densities of digestible N than the Coastal Plain may be more favorable for large male caribou that begin gaining protein from spring to breed in autumn. Our study provides evidence that phenological windows for protein gain in caribou are both spatially and temporally dynamic and likely to affect the distribution and growth of the population.

Ecosphere↗
USGS1956

X-ray powder data for uranium and thorium minerals

The U.S. Geological Survey has in preparation a comprehensive volume on the mineralogy of uranium and thorium. This work has been done as part of a continuing systematic survey of data on uranium and thorium minerals on behalf of the Division of Raw Materials, U.S. Atomic Energy Commission. Pending publication of this volume and in response to a widespread demand among workers in uranium and thorium mineralogy, the X-ray powder diffraction data for the known minerals that contain uranium or thorium as an essential constituent are presented here. The coverage is complete except for a few minerals for which there are no reliable data owing to lack of authentic specimens. With the exception of that for ianthinite, the new data either originated in the Geological Survey or in the Mineralogical Laboratory of Harvard University. Data from the literature or other sources were cross-checked against the files of standard patterns of these laboratories; the sources are indicated in the references. Data not accompanied by a reference were obtained from films in the Harvard Standard File and cross-checked as to the identity of the film with the Geological Survey's file. Minor differences can be expected in the d-spacings reported for the same specimens by different investigators because of the manner of preparation of the mount, the conditions of X-ray irradiation, and the method of photography and measurement of the film or chart. The Harvard and Geological Survey data all were obtained from films taken in 114-mm diameter cameras, using either ethyl cellulose and toluene or collodion spindle mounts and Straumanis-type film mounting. Unless otherwise indicated all patterns were taken with copper radiation (Kα 1.5418 A.) and nickel filter and data are given in Angstrom units. The d-spacings are not corrected for film shrinkage. The correction ordinarily is small and in general is less than either the variation in spacing arising from differences in experimental technique of different investigators, including the varying absorption of samples of different thickness and concentration, or the variation attending slight changes in the chemical composition of the mineral. Some uranium minerals give poor diffraction patterns. The best results are generally obtained by using relatively small diameter spindles and long exposures, with a take-off angle from teh X-ray tube of about 4°. It is sometimes advantageous to shield the film from fluorescence in the visible region excited by X-ray irradiation. Copper radiation is preferable. The patterns of a few uranium minerals are greatly impaired by heavy grinding of the sample. Light crushing of the coarse sample after mixing with about one-third its volume of coarsely powdered low-absorption glass is helpful. Many uranium minerals, such as the members of the torbernite group, readily lose zeolithic water or transform to lower hydrates at or near ordinary conditions of temperature and humidity and care should be taken to control this in the manner of preservation and preparation of the sample.

Trace Elements Investigations↗
USGS2011

Dust: Small-scale processes with global consequences

Desert dust, both modern and ancient, is a critical component of the Earth system. Atmospheric dust has important effects on climate by changing the atmospheric radiation budget, while deposited dust influences biogeochemical cycles in the oceans and on land. Dust deposited on snow and ice decreases its albedo, allowing more light to be trapped at the surface, thus increasing the rate of melt and influencing energy budgets and river discharge. In the human realm, dust contributes to the transport of allergens and pathogens and when inhaled can cause or aggravate respiratory diseases. Dust storms also represent a significant hazard to road and air travel. Because it affects so many Earth processes, dust is studied from a variety of perspectives and at multiple scales, with various disciplines examining emissions for different purposes using disparate strategies. Thus, the range of objectives in studying dust, as well as experimental approaches and results, has not yet been systematically integrated. Key research questions surrounding the production and sources of dust could benefit from improved collaboration among different research communities. These questions involve the origins of dust, factors that influence dust production and emission, and methods through which dust can be monitored.

Eos, Transactions, American Geophysical Union↗
USGS1990

Coal in sub-Saharan-African countries undergoing desertification

Coal has been reported in 11 of the 16 sub-Saharan countries discussed in this appraisal: Mauritania, Senegal, Mali, Niger, Benin, Nigeria, Cameroon, Central African Republic, Sudan, Ethiopia, and Somalia. No coal occurrences have been reported in Gambia, Togo, Burkina, Chad, and Djibouti but coal may be present within these countries because neighboring countries do contain coal-bearing rocks. Most of these countries are undergoing desertification or will in the near future. Wood, directly or in the form of charcoal, constitutes two-thirds of the fuel used in Africa. Destruction of forest and shrub lands for fuel is occurring at an increasing rate because of desertification and increasing energy demands. The decline in biological productivity, coupled with concentration of population in areas where water is available and crops may be grown, leads to increasing shortages of wood for fuel. Part of the present and future energy needs of the sub-Saharan region could be met by use of indigenous coal and peat. Nine sedimentary basins, completely or partially within the sub-Saharan region, have the potential of either coal and/or peat deposits of economic value: 1- Senegal Basin, 2- Taoudeni Basin and Gao Trough, 3- Niger Basin, 4- Chad Basin, 5- Chari Basin, 6- Benue Trough (Depression), 7- Sudan Trough, 8- Plateau and Rift Belt, and 9- Somali Basin. Niger and Nigeria are the only countries in sub-Saharan Africa in which coal is presently being mined as a fuel source for powerplants and domestic use. Peat occurs in the deltas, lower river, and interdunal basin areas of Senegal, Mauritania, and Sudan. Peat can be used as an alternate fuel source and is currently being tested as a soil amendment in the agricultural sector.

Journal of African Earth Sciences↗
USGS2003

Lithologic coring in the lower Anacostia tidal watershed, Washington, D.C., July 2002

Little is known about the volumetric flux of ground water to the lower tidal Anacostia River, or whether ground-water flow is an important component of the contaminant load in this part of the Anacostia River. The watershed is in the eastern part of Washington, D.C., and has been subjected to over 200 years of urbanization and modifications of the river channel and nearby land areas. These anthropogenic factors, along with tidal fluctuations in the river, make ground-water data collection and interpretations difficult. The U.S. Geological Survey is cooperating with the District of Columbia Department of Health, Environmental Health Administration, Bureau of Environmental Quality, Water Quality Division, in a study to assess nonpoint-source pollution from ground water into the lower tidal Anacostia River. Lithologic cores from drilling activities conducted during July 2002 in the study area have been interpreted in the context of geologic and hydrogeologic information from previous studies in the lower Anacostia tidal watershed. These interpretations can help achieve the overall project goals of characterizing ground-water flow and contaminant load in the study area. Hydrostratigraphic units encountered during drilling generally consisted of late Pleistocene to Holocene fluvial deposits overlying Cretaceous fluvial/deltaic deposits. Cores collected in Beaverdam Creek and the Anacostia River indicated high- and low-energy environments of deposition, respectively. Two cores collected near the river showed different types of anthropogenic fill underlain by low-energy deposits, which were in turn underlain by sand and gravel. A third core collected near the river consisted primarily of sand and gravel with no artificial fill.

Washington DC↗
USGS2003

Trace-metal sources and their release from mine wastes: examples from humidity cell tests of hardrock mine waste and from Warrior Basin coal

To assess the potential impact of metal and acid contamination from mine-waste piles, it is important to identify the mineralogic source of trace metals and their mode of occurrence. Microscopic analysis of mine-waste samples from both hard-rock and coalmine waste samples demonstrate a microstructural control, as well as mineralogic control, on the source and release of trace metals into local water systems. The samples discussed herein show multiple periods of sulfide mineralization with varying concentrations of trace metals. In the first case study, two proprietary hard-rock mine-waste samples exposed to a series of humidity cell tests (which simulate intense chemical weathering conditions) generated acid and released trace metals. Some trace elements of interest were: arsenic (45-120 ppm), copper (60-320 ppm), and zinc (30-2,500 ppm). Untested and humidity cell-exposed samples were studied by X-ray diffraction, scanning electron microscope with energy dispersive X-ray (SEM/EDX), and electron microprobe analysis. Studies of one sample set revealed arsenic-bearing pyrite in early iron- and magnesium-rich carbonate-filled microveins, and iron-, copper-, arsenic-, antimony-bearing sulfides in later crosscutting silica-filled microveins. Post humidity cell tests indicated that the carbonate minerals were removed by leaching in the humidity cells, exposing pyrite to oxidative conditions. However, sulfides in the silica-filled veins were more protected. Therefore, the trace metals contained in the sulfides within the silica-filled microveins may be released to the surface and (or) ground water system more slowly over a greater time period. In the second case study, trace metal-rich pyrite-bearing coals from the Warrior Basin, Alabama were analyzed. Arsenic-bearing pyrite was observed in a late-stage pyrite phase in microfaults and microveins that crosscut earlier arsenic.

Conference Paper↗