USGS Science⌕ Search

SEARCH · USGS Science

Results for “Earth's Future”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

1,101 records · Page 45Linked to original sources
USGS2024

The EnMAP spaceborne imaging spectroscopy mission: Initial scientific results two years after launch

Imaging spectroscopy has been a recognized and established remote sensing technology since the 1980s, mainly using airborne and field-based platforms to identify and quantify key bio- and geo-chemical surface and atmospheric compounds, based on characteristic spectral reflectance features in the visible-near infrared (VNIR) and short-wave infrared (SWIR). Spaceborne missions, a leap in technology, were sparse, starting with the CHRIS/PROBA and EO1/Hyperion missions in the early 2000s, and providing spectroscopy data with limited spectral coverage and/or low data quality in the SWIR. Since 2019, several countries and agencies have successfully launched a number of spaceborne imaging spectroscopy systems into orbit or deployed them on the International Space Station (ISS) such as DESIS, PRISMA, HISUI, GF-5, EnMAP and EMIT. Among these recent missions, the German Environmental Mapping and Analysis Program (EnMAP) stands for its long-term development, sophisticated design with on-board calibration, high data quality requirements, and extensive accompanying science program. EnMAP was launched in April 2022 and, following a successful commissioning phase, started its operational activities in November 2022. The EnMAP mission encompasses global coverage from 80° N to 80° S through on-demand data acquisitions. Data are free and open access with 30 m spatial resolution, a high spectral resolution with a spectral sampling distance of 6.5 nm and 10 nm in the VNIR and SWIR regions respectively, and a high signal-to-noise ratio. In this paper, we aim to present the mission's current status, coverage, science capabilities and performance two years after launch. We show the potential of EnMAP for space-based imaging spectroscopy to operate in various environments, including high and low light levels, dense forests, Antarctic glaciers, and arid agricultural areas. EnMAP enables various applications in fields such as agriculture and forestry, soil compositional, raw materials, and methane mapping, as well as water quality assessment, and snow and ice properties. The results show that EnMAP's performance exceeds the mission requirements, and highlights the significant potential for contribution to scientific exploitation in various geo- and biochemical sciences. EnMAP is also expected to serve as a key tool for the development and testing of data processing algorithms for upcoming global operational missions.

Remote Sensing of Environment↗
USGS2026

Simulation of groundwater flow to evaluate hydrogeologic controls on a PFAS plume, Coakley Landfill Superfund Site, Rockingham County, New Hampshire

Per- and polyfluoroalkyl substances (PFAS), including perfluorooctanoic acid (PFOA) and perfluorooctanesulfonic acid (PFOS), have been detected at combined concentrations above 2,000 nanograms per liter (ng/L) at groundwater seep locations near the Coakley Landfill Superfund site, in North Hampton, New Hampshire. The landfill was active from 1972 to 1985. An impermeable cap was placed on the landfill in 1998. The adjacent area to the Coakley Landfill has many water supply wells, and transport of PFAS compounds to the wells is a concern. Fracture anisotropy in the underlying bedrock aquifer complicates the understanding of PFAS transport because groundwater preferentially travels along fractures that may not align with the prevailing groundwater flow direction. In 2018, the U.S Environmental Protection Agency and the U.S. Geological Survey began an investigation of the groundwater flow from the Coakley Landfill site. This report describes the modification of a numerical groundwater-flow model for the local area around the Coakley Landfill and summarizes findings of the investigation. In addition, this report includes a brief description of PFOA and PFOS occurrence, a discussion of model construction, evaluation of model performance through calibration, and discussion of simulation results for two periods (before and after capping). Limitations are also discussed. Results show that simulated groundwater flow moves from the Coakley Landfill to the west and north. Advective transport modeling using particle tracking shows that groundwater from the landfill discharges primarily to streams to the west and north, and a small amount is transported to distal wells. Dilution of contaminants through advection and dispersion likely plays a role in whether PFAS compounds from the landfill will be detected above laboratory reporting levels at distal wells.

EarthArXiv↗
USGS2026

Computation of regional groundwater budgets for the Virginia Coastal Plain aquifer system

Computation of detailed groundwater flow budgets for subdivisions of Virginia’s Coastal Plain aquifer system has enabled quantification and more thorough understanding of groundwater flow within this important water resource. A zone budget analysis conducted on previously published groundwater models of the Virginia Coastal Plain and Virginia Eastern Shore shows that groundwater conditions vary substantially throughout the Coastal Plain aquifer system due to local variations in hydrogeology and historical and ongoing variations in groundwater use and management. Decades of substantial groundwater withdrawal from the Coastal Plain aquifer system have fundamentally altered groundwater flow from pre-development conditions. Rates of sustainable withdrawal are limited because the downward groundwater flow rate into confined aquifers supplying groundwater is a relatively small portion of the total groundwater water budget for the aquifer system. Analyses of groundwater budgets from the Virginia Coastal Plain model show that groundwater flow is generally outward from the surficial aquifer to rivers and coastal water bodies and downward through a series of underlying aquifers and confining units to the Potomac aquifer, which is the deepest aquifer and the source of most groundwater withdrawals. Downward flow into the Potomac aquifer currently is estimated to be only 7 percent of total net precipitation-derived net recharge at the land surface but makes up about 66 percent of inflow to the aquifer in Virginia, with much of the remaining inflow occurring laterally from areas outside of defined groundwater budget regions in Virginia. For several decades prior to 2010, high rates of withdrawal from the Potomac aquifer resulted in substantial decline in groundwater storage in the aquifer and in most overlying aquifers and confining units. From 2010 to 2025, rates of withdrawal substantially lower than the historical maximum have resulted in small net increases in groundwater storage in the confined aquifer system for most regions of the Virginia Coastal Plain. Nevertheless, for the same period, groundwater storage for the entire model domain continues to incrementally decline, indicating that storage recovery in Virginia is offset by a continued decrease in storage in areas beneath the Chesapeake Bay or in adjacent areas of Maryland and North Carolina. Withdrawals from the Potomac aquifer have induced substantial downward flow which is a large part of groundwater budgets for confined aquifers such as the Potomac. Downward groundwater flow continues under current conditions, but because vertical flow rates are a function of the difference between water pressure in the upper surficial systems and lower confined units, those rates are lower than those in earlier decades as the confined water levels partially recover from larger groundwater withdrawals in the past. Geographically, groundwater flow is generally inward from perimeter regions of the Virginia Coastal Plain toward central regions with the largest withdrawal rates. Estimated groundwater inflow from coastal regions could be contributing to saltwater intrusion, though that was not measured directly in this study. Analyses of groundwater budgets from the Virginia Eastern Shore peninsula, a geographic region of the Virginia Coastal Plain, show that groundwater flow for that isolated aquifer system is generally outward from the surficial aquifer to coastal water bodies and downward into the confined Yorktown-Eastover aquifer system, which is the source of most withdrawals. Downward groundwater flow into the confined Yorktown-Eastover aquifer system is estimated to be less than 2 percent of total recharge and less than 9 percent of net recharge at the water table but makes up over 93 percent of all inflow to the confined aquifer system. Decades of substantial but relatively consistent groundwater withdrawals have induced greater downward flow rates into the confined aquifer system but also have resulted in loss of groundwater from storage. Currently, estimated storage loss accounts for slightly under 7 percent of withdrawals from the confined aquifer system. The current withdrawal rate from the confined Yorktown-Eastover system is near the highest reported rate for the Eastern Shore, which means that the storage depletion is expected to continue, even though groundwater levels appear to be relatively stable. Estimated groundwater flow rates upward from the confining unit underlying the Yorktown-Eastover system and small rates of inflow from coastal water bodies underscore ongoing concerns about up-coning and lateral intrusion of salty groundwater.

EarthArXiv↗
USGS1999

The mineral economy of Brazil--Economia mineral do Brasil

This study depicts the Brazilian government structure, mineral legislation and investment policy, taxation, foreign investment policies, environmental laws and regulations, and conditions in which the mineral industry operates. The report underlines Brazil's large and diversified mineral endowment. A total of 37 mineral commodities, or groups of closely related commodities, is discussed. An overview of the geologic setting of the major mineral deposits is presented. This report is presented in English and Portuguese in pdf format.

Data Series↗
USGS2026

Wavelet Inversion for SliP (WISP): Open-source earthquake slip modeling software

Models of the spatiotemporal evolution of earthquake slip, termed finite-fault models, are a critical component of rapid earthquake and tsunami response, earthquake forecasting, seismic ground-motion estimates, and studies of earthquake kinematics. Here, we detail a newly released finite-fault modeling software, Wavelet Inversion for SliP (WISP), in use at the U.S. Geological Survey’s National Earthquake Information Center (NEIC) and available to the public. WISP version 1.1.0 allows inversion of teleseismic body and surface waves, as well as local strong-motion, static and dynamic Global Navigation Satellite System, and satellite imagery (e.g., Interferometric Synthetic Aperture Radar) observations on single or multiple planar fault segments. The software is used in NEIC rapid response of earthquakes M w ≥ 7, generally resulting in a published model within the first few hours after the event origin time. The rupture location and dimensions are then used as inputs to downstream products to estimate earthquake shaking, predict loss, and model the likelihood of secondary hazards, namely landslides and liquefaction. WISP is also used in research studies to evaluate the characteristics of complex ruptures including multifault ruptures and earthquake doublets, among others. The WISP version 1.1.0 software release is composed of Python-wrapped FORTRAN code to accomplish the inversion procedure. A simple command line interface facilitates ease of use even for those with only a cursory knowledge of Python scripting. WISP version 1.1.0 includes a Jupyter Notebook tutorial demonstrating use of the software for modeling the 2015 M w 8.3 Illapel, Chile, earthquake. In parallel with the tutorial, we demonstrate the typical usage of the WISP software using the M w 8.3 Illapel earthquake example here.

Seismological Research Letters↗
USGS2025

Statewide cumulative human health risk assessment of inorganics-contaminated groundwater wells, Montana, USA

Across the United States, rural residents rely on unregulated and generally unmonitored private wells for drinking water, which may pose serious health risks due to unrecognized contaminants. We assessed the nature, degree, and spatial distribution of cumulative health risks from inorganic contaminants in groundwater. Our analysis included nearly 84,000 data points from 6500+ wells, across 51 of Montana's 98 watersheds, using a public groundwater database. We compared a drinking water screening level cumulative risk assessment (CRA) for inorganics based on the U.S. Environmental Protection Agency (EPA) protective health thresholds (Maximum Contaminant Level Goals, Health Advisories [MCLG-HAs]) to a CRA based on EPA public supply enforceable Maximum Contaminant Levels (MCLs). Based on median concentrations of 19 inorganics (antimony, arsenic, barium, beryllium, boron, cadmium, chromium, copper, fluoride, manganese, molybdenum, nickel, nitrate, lead, selenium, strontium, thallium, uranium, zinc), 75% of watersheds had MCLG-HA-based cumulative risk values > 1.0; arsenic and uranium contributed the most risk, followed by strontium, fluoride, manganese and boron. Hence, this screening level (Tier I) CRA indicated widespread potential for unrecognized human health risk to private well users from inorganic contaminants considering both carcinogenic and non-carcinogenic risks. Sensitivity analysis showed that benchmarks applied (MCLG-HAs versus MCLs) exerted the largest control on results. Our findings identify priority regions for Tier 2 risk assessments to elucidate local sources and distributions of geogenic versus anthropomorphic contaminants. Our study is the first statewide assessment of cumulative health risk from groundwater that we are aware of, and results support increased statewide drinking water education and testing to reduce human health risks from contaminated private well water.

Montana↗
USGS2026

Reassessing water availability in the Nile River Basin using satellite-based irrigation water use accounting

Existing estimates of irrigation areas and water use in the Nile River Basin vary widely and are based on inconsistent data and methodologies. This study leverages advances in remote sensing to provide an up-to-date and consistent basin-wide reassessment of water use in the Nile River Basin. Land cover and actual evapotranspiration data from 2013 to 2022 were used to quantify irrigated areas, irrigation water use, and the average naturalized water yield. Across the basin, 7.1 million hectares of irrigated land consume an average of 72.5 ± 2.6 billion cubic meters (BCM) of blue water annually. Egypt and Sudan together account for 92% of the irrigated area and 97% of the irrigation water use. The basin’s average naturalized yield, evaluated at Dongola station, is determined to be between 108 and 114.4 ± 3.2 BCM. Although conservative, this updated analysis indicates the basin’s average naturalized yield is 14%–20% higher than the previous naturalized yield estimate (95 BCM) and 29%–36% higher than the commonly cited observed flow of 84 BCM, which is frequently treated as the total basin-wide available water. Importantly, the study underscores that the 84 BCM represents flow at the Aswan gauging station after upstream consumptive uses, not the total water available in the basin under naturalized conditions. This distinction is critical for accurate water accounting, planning, and governance in this water-scarce basin. This study demonstrates the value of open-source remote sensing resources in data-scarce regions while emphasizing the need for region specific validation and bias correction for improved accuracy.

Nile River Basin↗
USGS2025

Four-band image mosaic of the Colorado River Corridor downstream of Glen Canyon Dam in Arizona, derived from the May 2021 airborne image acquisition

In May 2021, the U.S. Geological Survey’s Grand Canyon Monitoring and Research Center acquired airborne multispectral high-resolution data for the Colorado River in the Grand Canyon, Arizona. The image data, which consist of four spectral bands (red, band 1; green, band 2; blue, band 3; and near infrared, band 4) with a ground resolution of 20 centimeters, are available as 16-bit unsigned-integer GeoTIFF files in Sankey and others (2024) (available online at https://doi.org/10.5066/P9BBGN6G ). The image files are projected in the State Plane Coordinate System, using the central Arizona zone (202) with the North American Datum of 1983 National Adjustment of 2011. The assessed spatial accuracy for these data is based on 47 ground-control points that were independent from the ground-control points used by the contractor for aerotriangulation and is reported at the 95-percent confidence level as 0.514 meter (m) and a root mean square error of 0.297 m. The intended uses of this dataset are primarily in support of scientific research and monitoring applications. Examples of these applications include high-resolution spatial and temporal change detection of the river channel, geomorphic landforms, riparian vegetation, and backwater and nearshore habitat, as well as other ecosystem-wide mapping. These imagery data also serve as reference material for field science mission planning, as base data for field data collection including community science activities, and as a highly detailed guide for technical boat operation during science activities such as reconnaissance for nighttime missions and navigating rapids during low flows.

Arizona, Nevada, Utah↗
USGS2025

Seismic intensities, ground motions and basin amplification from the 2022 Mw 6.4 Ferndale, California intraslab earthquake

On December 20, 2022, a Mw 6.4 earthquake occurred at a depth of 18 km within the subducting Gorda plate in the Mendocino Triple Junction (MTJ), one of the most seismically active regions of the contiguous United States, causing widespread damage to local communities. Here we document the seismic intensities, ground motions, and basin amplification effects recorded by this earthquake across Humboldt County as part of an ongoing scientific effort to understand subduction zone earthquake hazards. Modified Mercalli Intensity (MMI) values from our post-earthquake field survey report shaking intensities as high as VIII (Severe). Strong ground motion data from 54 seismic stations were processed to calculate amplitude and frequency content parameters across Northern California. The maximum calculated geometric mean PGA and PGV are 1053 cm/s 2 and 52 cm/s (respectively), both recorded within the 3 km deep Eel River sedimentary basin. Comparisons with four published Ground Motion Prediction Equations indicate that PGA and PGV measurements align with expected attenuation-distance patterns for intraslab earthquakes of this nature. Within the Eel River Basin, ground motions for frequencies above 1 Hz are amplified, with respect to reference stations, by factors greater than 2. Our findings suggest that peak ground motions were mainly caused by sedimentary basin site-effects within the Eel River basin, although rupture directivity may have also increased ground motion amplitudes locally. While the Ferndale area is primarily impacted by shallow intraslab earthquakes, our results also raise questions about site-response and basin amplification hazards from a potential megathrust earthquake. The high seismicity rates of the southernmost Cascades call for stronger regional preparedness and improved strategies to mitigate the effects of such a large-scale disaster.

California↗
USGS2026

Design and function of the Autonomous Benthic Imaging and Surveying System (ABISS) for remote sensing of lake and seabed environments

Lake and seabed environments are home to fisheries and other biota that are important to ecosystems and economies, yet these environments and the species that use them are difficult to accurately assess and monitor. Traditional benthic survey techniques, like bottom trawling used by the U.S. Geological Survey, are limited by substrate constraints, poor spatial resolution and precision, and operational depth limits, hindering accurate assessment of benthic species and habitats. In response to these limitations, the U.S. Geological Survey developed the Autonomous Benthic Imaging and Surveying System, a camera system integrated into underwater vehicles, to capture high-resolution images of the lakebed. The system uses color and stereo cameras to collect imagery, which can be analyzed using computational methods to detect organisms and (or) characterize habitat features, such as geologic substrate types. The system has been integrated into autonomous underwater vehicles and into an underwater housing used by self-contained underwater breathing apparatus (SCUBA) divers. Although the engineering of the system was motivated by the need for data collection in the Great Lakes, it has potential to collect high quality data in any aqueous setting with sufficient water clarity and safe operating conditions. The Autonomous Benthic Imaging and Surveying System can operate across diverse depths and light conditions to map and quantify ecological patterns that were difficult or impossible to assess using traditional methods. The Autonomous Benthic Imaging and Surveying System offers the potential for accurate and precise monitoring and assessment of native benthic biota, invasive species, and habitat, potentially providing natural resource managers with improved information to support decision making about benthic resource management.

Great Lakes↗
USGS2026

Simulation of groundwater flow to evaluate hydrogeologic controls on a PFAS plume, Coakley Landfill Superfund site, Rockingham County, New Hampshire

Per- and polyfluoroalkyl substances (PFAS), including perfluorooctanoic acid (PFOA) and perfluorooctanesulfonic acid (PFOS), have been detected at combined concentrations above 2,000 nanograms per liter (ng/L) at groundwater seep locations near the Coakley Landfill Superfund site, in North Hampton, New Hampshire. The landfill was active from 1972 to 1985. An impermeable cap was placed on the landfill in 1998. The adjacent area to the Coakley Landfill has many water supply wells, and transport of PFAS compounds to the wells is a concern. Fracture anisotropy in the underlying bedrock aquifer complicates the understanding of PFAS transport because groundwater preferentially travels along fractures that may not align with the prevailing groundwater flow direction. In 2018, the U.S. Environmental Protection Agency and the U.S. Geological Survey began an investigation of the groundwater flow from the Coakley Landfill site. This report describes the modification of a numerical groundwater-flow model for the local area around the Coakley Landfill and summarizes findings of the investigation. In addition, this report includes a brief description of PFOA and PFOS occurrence, a discussion of model construction, evaluation of model performance through calibration, and discussion of simulation results for two periods (before and after capping). Limitations are also discussed. Results show that simulated groundwater flow moves from the Coakley Landfill to the west and north. Advective transport modeling using particle tracking shows that groundwater from the landfill discharges primarily to streams to the west and north, and a small amount is transported to distal wells. Dilution of contaminants through advection and dispersion likely plays a role in whether PFAS compounds from the landfill will be detected above laboratory reporting levels at distal wells.

New Hampshire↗
USGS1999

Water-quality assessment of the New England coastal basins in Maine, Massachusetts, New Hampshire, and Rhode Island: Environmental settings and implications for water quality and aquatic biota

The New England Coastal Basins in Maine, Massachusetts, New Hampshire, and Rhode Island constitute one of 59 study units selected for water-quality assessment as part of the U.S. Geological Survey's National Water-Quality Assessment (NAWQA) program. England Coastal Basins study unit encompasses the fresh surface waters and ground waters in a 23,000 square-mile area that drains to the Atlantic Ocean. Major basins include those of the Kennebec, Androscoggin, Saco, Merrimack, Charles, Blackstone, Taunton, and Pawcatuck Rivers. Defining the environmental setting of the study unit is the first step in designing and conducting a multi-disciplinary regional water-quality assessment. The report describes the natural and human factors that affect water quality in the basins and includes descriptions of the physiography, climate, geology, soils, surface- and ground-water hydrology, land use, and the aquatic ecosystem. Although surface-water quality has greatly improved over the past 30 years as a result of improved wastewater treatment at municipal and industrial wastewater facilities, a number of water-quality problems remain. Industrial and municipal wastewater discharges, combined sewer overflows, hydrologic modifications from dams and water diversions, and runoff from urban land use are the major causes of water-quality degradation in 1998. The most frequently detected contaminants in ground water in the study area are volatile organic compounds, petroleum-related products, nitrates, and chloride and sodium. Sources of these contaminants include leaking storage tanks, accidental spills, landfills, road salting, and septic systems and lagoons. Elevated concentrations of mercury are found in fish tissue from streams and lakes throughout the study area.

Maine, Massachusetts, New Hampshire, Rhode Island↗
USGS2025

Site-specific, extended ShakeMaps for earthquake engineering applications

The U.S. Geological Survey (USGS) routinely produces ShakeMaps of shaking intensity across the globe. Due to practical constraints, the number of response spectral periods was limited to three standard periods (0.3, 1.0, and 3.0 sec). We have recently developed the tools that are necessary to expand this functionality to include 22 periods (matching the current U.S. National Seismic Hazard Model periods) as well as the orientation-independent components (e.g., “RotD50”). We refer to ShakeMap products that include these extensions as “extended ShakeMaps.” The added level of complexity motivated us to also develop a user-friendly tool called the “ShakeMap Sampling Tool” (SST) that gives all the estimated shaking metrics for a specific location (or list of locations). Additionally, we develop a web application where users can input locations of interest and view/download the SST results. We further familiarize users with the concept of “Composite ShakeMaps.” For earthquakes sequences such as a mainshock and larger foreshocks and aftershocks, this provides a map of the maximum value of each shaking metric, which is useful for overall loss estimates, the full extent of ground failure triggering potential, and a better portrayal of the repeated shaking levels at a given point for a series of earthquakes. Such a site-specific shaking history facilitates earthquake forensics at building or infrastructure sites for which damage may be of concern, as described in the Disproportionate Damage Earthquake trigger specified in the IEBC (2018, Section 405.2.2) and in developing ATC-145 guidelines (Guidelines for Post-Earthquake Assessment, Repair, and Retrofit of Buildings). The composite ShakeMap can be combined with the SST for a variety of earthquake-hazard applications, such as systematically inferring triggering shaking estimates at specific sites of geotechnical interest for landsliding, liquefaction, and lateral-spreading hazards.

Kahramanmaraş↗
USGS2025

Rapid emplacement of the Keaiwa Lava Flow of 1823 from the Great Crack in the Southwest Rift Zone of Kilauea volcano

The Keaīwa Lava Flow of 1823 in the Southwest Rift Zone of Kīlauea volcano is unusual for its expansive pāhoehoe sheet flow morphology and lack of constructive vent topography, despite having a similar tholeiitic basalt composition to other lavas erupted from Kīlauea. This lava flow issued from a ∼10-km-long continuous fissure now known as the Great Crack, and has an unusually thin sheet flow morphology with margin thicknesses of ∼15–110 cm (average of 42 cm). Based on field observations of the lava flow at its fissure vent (e.g., drain-back features), we propose that the Great Crack formed, or at least significantly widened, just prior to and syn-eruptively with this 1823 eruption. The absence of pyroclastic cones or spatter ramparts indicates that the eruption consisted of a rapid outpouring of relatively degassed lava as the fissure unzipped. The rapidly moving lava flow overtopped pre-existing tumuli and scoria cones (e.g., Lava Plastered Cones) up to ∼10 m tall. Glass and whole-rock chemistry yield homogeneous compositions for the lavas erupted from the Great Crack, with glass compositions of 6.40 ± 0.10 wt% MgO and whole-rock compositions of 7.39 ± 0.07 wt% MgO. Lava pads erupted from a short western fissure system are richer in mafic minerals (e.g., olivine and clinopyroxene), and show slightly more MgO-rich whole-rock compositions (7.79 ± 0.05 wt%). MgO-in-glass thermometry on juvenile spatter yield eruption temperatures of 1153 ± 13°C that are typical of Kīlauea lavas. Thus, the extensive sheet-like lava flow morphology is not a direct consequence of unusual magmatic or rheological conditions (i.e., low viscosity). Instead, the flow morphology is associated with high effusion rates caused by sudden drainage of uprift magma as it erupted from the Great Crack. Lava flow modeling on a 2-m-resolution digital elevation model indicates that a minimum bulk effusion rate of ∼5800 m 3 /s (∼3500 m 3 /s dense rock equivalent) and a minimum flow velocity of ∼11 m/s are required for the lava flow to overcome the topography of the Lava Plastered Cones. This effusion rate is among the highest inferred for eruptions in Hawaiʻi and around the world. This study highlights a less frequent eruption style at Hawaiian volcanoes characterized by a sudden outpouring of lava from an unusual fissure system. Local eyewitness accounts indicate that the 1823 eruption was preceded by seismicity. Given the complex magmatic-volcanic-tectonic relations across Kīlauea, we speculate that the south flank could have slipped over one or more events that ultimately triggered unzipping of the Great Crack and passive release of briefly stored uprift magma. An eruption similar to 1823 at Kīlauea or Mauna Loa, with an eruptive timeframe that could be as short as an hour, with high effusion rates and rapid flow front velocities, would not easily allow for a timely response.

Hawaii↗
USGS2024

Post-wildfire debris flows

Post-wildfire debris flows pose severe hazards to communities and infrastructure near and within recently burned mountainous terrain. Intense heat of wildfires changes the runoff characteristics of a watershed by combusting the vegetative canopy, litter, and duff, introducing ash into the soil and creating water repellant soils. Following wildfire, rainfall on bare ground is less able to infiltrate into the fire-altered soils and overland flow is less impeded by vegetation. Rainfall runoff in recently burned areas can erode hillslopes owing to the removal of soil binding organic matter near the soil surface by fire. In channels, loose, dry-ravel deposits composed of sand and gravel are readily entrained by concentrated runoff in channels. Entrainment of soil on hillslopes and in channels bulks up the sediment concentration of the rainfall runoff to generate debris flows capable of transporting boulders and large woody debris. Post-wildfire debris flows can be triggered by rainfall conditions that would typically produce little runoff during unburned conditions. The primary rainfall trigger for post-wildfire debris flows is high intensity rainfall during short duration convective rainstorms or periods of high rainfall intensity embedded within a long-duration frontal storm. Numerous observations of debris flows triggered by storms lasting less than an hour following periods of little to no rainfall indicate that antecedent rainfall is not a requirement for initiation of post-wildfire debris flows. Post-wildfire debris-flow hazard assessment entails estimating probability and magnitude of debris flows in the burned area, estimating debris-flow runout and intensity, and defining rainfall intensity-duration thresholds for debris-flow initiation. In the United States, probability and magnitude is estimated using empirically derived models largely based on data collected in southern California. The models provide maps to identify watersheds and drainage paths where post-wildfire hazards are most pronounced. Rainfall intensity-duration thresholds can be incorporated into flood hazard forecasting tools. Currently, work is underway to identify how to best implement debris-flow runout models in burned areas with efficiency and accuracy. Post-wildfire debris flows have been a long-recognized process in the Transverse Ranges of southern California; however, climate change is driving more frequent wildfires to burn more mountainous terrain throughout the western United States and worldwide. As a result, post-wildfire debris flows are becoming a more common threat in areas where they were once infrequent. As the threat of post-wildfire debris flow expands into new areas, evaluating the hazard becomes challenging because the degree to which wildfire increases debris-flow susceptibility varies from region to region. This chapter summarizes the knowledge to date for evaluating post-wildfire debris-flow susceptibility and hazard assessment. We summarize the characteristics of wildfire burn severity, topography, underlying soil and geology, and rainfall conditions that contribute to making a watershed most likely to produce post-wildfire debris flows. Methods for hazard assessment in the United States and other countries are summarized. We highlight knowledge gaps for how post-wildfire debris-flow susceptibility varies throughout the western United States and worldwide and identify research needs to improve hazard assessment methods in different geographies.

Book chapter↗
USGS2025

Mapping eelgrass (Zostera marina) cover and biomass at Izembek Lagoon, Alaska, using in-situ field data and Sentinel-2 satellite imagery

The U.S. Geological Survey and the U.S. Fish and Wildlife Service have developed a three-tiered strategy for monitoring eelgrass ( Zostera marina ) beds at Izembek Lagoon, Alaska, that targets different spatial and temporal scales. The broadest-scale monitoring (tier-1) uses satellite imagery about every 5 years to delineate the spatial extent of eelgrass beds throughout the lagoon. This report describes the most recent (mid-2020s) tier-1 eelgrass monitoring at Izembek Lagoon. The monitoring effort began by canvasing all satellite imagery collected during summer, under clear daytime skies and at low-tide, since the last tier-1 effort in 2006. Two eelgrass maps of Izembek Lagoon were generated by first creating maps of spectrally unique classes from two Sentinel-2 satellite images collected on July 1, 2016, and August 14, 2020, then attributing those spectral classes with information about eelgrass conditions based on field data. Specifically, maps depicting various eelgrass metrics, such as percentage of cover and modeled biomass, were generated using summaries of the ground data that spatially intersected each spectral class. Comparisons of the 2016 and 2020 Sentinel-2 maps showing eelgrass distributional extent, as well as a 2006 Landsat map, indicated that areas where eelgrass presence may have declined during 2006–20 were most prevalent in the central part of Izembek Lagoon. More recently, during 2016-20, areas of possible biomass decline were more prevalent in the southern part of the lagoon. Monitoring eelgrass conditions at Izembek Lagoon with satellite imagery and concurrent ground data allows conditions to be compared over time, but the influences of tide levels, growing season phenology, and spatiotemporal co-registration accuracy should be considered when designing and interpreting change detection analyses.

Alaska↗
USGS2025

Estimating earthquake source depth using teleseismic broadband waveform modeling at the USGS National Earthquake Information Center

The U.S. Geologic Survey National Earthquake Information Center (NEIC) monitors global seismicity, producing a catalog of earthquake source parameters in near-real-time to provide information that can help mitigate the societal impact of earthquakes. The NEIC commonly relies on teleseismic observations to constrain earthquake source parameters (e.g., location, depth, magnitude, and mechanism) due to a lack of local and regional observations. For these ‘teleseismic’ events, depth phase (i.e., pP , sP ) arrival time observations provide the best estimate on source depth. However, depth phases are often difficult to accurately identify and/or pick. Therefore, NEIC relies on waveform modeling, such as those determined from W-phase ( M ww ), body wave ( M wb ), and regional ( M wr ) moment tensor estimations, to provide constraints on source depth. While depth estimates from these approaches are informative, higher frequency observations provide more precise estimates because depth phases are more prominently observed at higher frequencies. Here, we present NEIC’s relatively high-frequency (~0.04 to 1 Hz) teleseismic waveform modeling approach, termed Synthetic Depth Phase Modeling (SynDepth), for determining source depth. SynDepth was developed to provide NEIC with a tool that enables rapid, accurate, and quantifiable estimates of earthquake source depth in cases where locator depths are not reliable. This relatively simple and fast procedure searches over 1 km-incremented source depths and an expanding triangular source-time function to find the best-fitting solution. We compare automatic SynDepth solutions for a dataset of 1,216 earthquakes (M5.5-M7.6) between 2017 and 2021 to NEIC-derived depth estimates from other methods. Our approach provides a robust depth estimate for earthquakes lacking local arrival time data, and it minimizes the need for analyst review of depth-phase picks ( pP , sP ) or using predefined ‘fixed’ depths.

Seismological Research Letters↗
USGS1993

Hydraulic properties of the Madison aquifer system in the western Rapid City area, South Dakota

Available information on hydrogeology, data from borehole geophysical logs, and aquifer tests were used to determine the hydraulic properties of the Madison aquifer. From aquifer-test analysis, transmissivity and storage coefficient were determined for the Minnelusa and Madison aquifers, and vertical hydraulic conductivity (K v ') along with specific storage (Ss') for the Minnelusa confining bed. Borehole geophysical well logs were used to determine the thickness and location of the Minnelusa aquifer, the lower Minnelusa confining bed, and the Madison aquifer within the Madison Limestone. Porosity values determined from quantitative analysis of borehole geophysical well logs were used in analyzing the aquifer-test data. The average porosity at the two aquifer-test sites is about 10 percent in the Minnelusa aquifer, 5 percent in the lower Minnelusa confining bed, and 35 percent in the Madison aquifer. The first aquifer test, which was conducted at Rapid City production well #6, produced measured drawdown in the Minnelusa and Madison aquifers. Neuman and Witherspoon's method of determining the hydraulic properties of leaky two-aquifer systems was used to evaluate the aquifer-test data by assuming the fracture and solution-opening network is equivalent to a porous media. Analysis of the aquifer test for the Minnelusa aquifer yielded a transmissivity value of 12,000 feet squared per day and a storage coefficient of 3 x 10 -3 . The specific storage of the Minnelusa confining bed was 2 x 10 -7 per foot, and its vertical hydraulic conductivity was 0.3 foot per day. The transmissivity of the Madison aquifer at this site was 17,000 feet squared per day, and the storage coefficient was 2 x 10 -3 . The second aquifer test, which was conducted at Rapid City production well #5 (RC-5) produced measured drawdown only in the Madison aquifer. Hantush and Jacob's method of determining the hydraulic properties of leaky confined aquifers with no storage in the confining bed was used to evaluate the aquifer-test data by assuming the fracture and solution-opening network is equivalent to a porous media. The analysis of data from the RC-5 aquifer test showed that transmissivity was not equal in all directions. Hantush's method was used to determine the direction of radial anisotropy and magnitude of the major and minor axes of transmissivity. The major axis of transmissivity is at an angle of 42° east of north, and the transmissivity along this axis is about 56,000 feet squared per day. The minor axis of transmissivity is at an angle of 48° west of north, and the transmissivity along this axis is about 1,300 feet squared per day. The major axis of transmissivity intersects Cleghorn Springs, a large resurgent spring on the west edge of Rapid City. The shape of the potentiometric contours of the Madison aquifer near RC-5 agree with the orientation of the transmissivity ellipse. The average value of the storage coefficient from the isotropic analysis of the aquifer-test data was 3.5 x 10 -4 , and the average vertical hydraulic conductivity of the lower Minnelusa confining bed was 9.6 x 10 -3 foot per day.

South Dakota↗