USGS Science⌕ Search

SEARCH · USGS Science

Results for “Deep Sea Research Part II: Topical Studies in Oceanography”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

1,615 records · Page 45Linked to original sources
USGS2025

A soil velocity model for improved ground motion simulations in the U. S. Pacific Northwest

Near-surface seismic velocity structure may significantly impact the intensity, duration, and frequency content of ground shaking during an earthquake. In this study, we compile 649 shear wave velocity (Vs) profiles throughout the U.S. Pacific Northwest and southern British Columbia (PNW) and use these measured profiles to develop a representative soil velocity model for four major Holocene soil provinces: Puget Lowlands, Willamette Valley, fill and alluvium, and `other' soils. The resulting soil velocity model shows good agreement to measured data for a wide range of site conditions, with variability between different geologic domains reflecting fundamental differences in depositional environments. We then show that using this regional soil velocity model in simulations of the 2001 M6.8 Nisqually, Washington earthquake improves the fit to observed high-frequency (≥ 0.5 Hz) ground motions in the Puget Sound region compared to simulations that do not incorporate shallow (≤ 200 m) seismic velocity structure. Overall, this work shows that incorporating localized soil velocity profiles into seismic velocity models is important for accurately estimating high-frequency ground motion and regional seismic hazard in earthquake simulations. Future earthquake simulations and hazard studies in the PNW could incorporate these soil velocity profiles to capture the region's distinct site response characteristics.

Washington↗
USGS2023

Connecting flood-related fluvial erosion and deposition with vulnerable downstream road-stream crossings

Fluvial erosion is increasingly responsible for infrastructure and building damages associated with floods as the intensity of extreme rainfalls hit rural and urban rivers in a variety of climate settings across the United States. Extreme floods in 2016 and 2018 caused widespread culvert blockages and road failures, including extensive damage along steep tributaries and ravines in the Marengo River, Wisconsin, watershed during 2016 and 2018. A study conducted by the U.S. Geological Survey (USGS), Wisconsin Wetlands Association (WWA), Ashland County, and the Northwest Wisconsin Regional Planning Commission (NWRPC) investigated the special concern of fluvial erosion hazards (FEHs) associated with gullying, streamside landslides, and the loss of wetland storage in headwaters. In 2019, a pilot study was begun to map and classify ephemeral and perennial streams and wetlands in terms of their sensitivity to FEHs. This study combined data from field-based rapid geomorphic assessments (RGAs) coupled with a stream network-wide geographic information system (GIS) approach for mapping stream segments, referred to as fluvial process zones (FPZ), sensitive to erosion, deposition, and channel change. The GIS approach used nationally available 10-meter (m) resolution topology and an extended stream network to map FPZs based on Strahler stream order, stream power, channel slope, presence of adjacent steep valley sides and headwater flats, and adjacent landform setting. Bankfull channel widths derived from RGA-based hydraulic geometry curves combined with drainage areas, an estimate of bankfull flow, and channel slope were used to calculate specific stream power for the FPZs. Lastly, the FPZs were characterized by their location within three major landform settings that affect erosion potential. The resulting vulnerability maps provided a screening framework to identify FPZs that are sensitive to incision, gullying and mass wasting along steep headwater ephemeral channels, as well as downstream perennial channels that have the potential for valley-side landslides, coarse sediment deposition, and channel change. Lastly, each FPZ was characterized in terms of hydrologic alteration associated with ditching. The vulnerability mapping products and rankings of sensitivity of FPZs will ultimately be used by Ashland County and their collaborators to prioritize natural flood management projects that mitigate FEHs, restore hydrology, and reconnect channels with adjacent wetlands and floodplains.

Wisconsin↗
USGS2026

Use of precariously balanced rocks to constrain postglacial earthquake magnitudes in New England, United States

We use the age and fragility of 13 precariously balanced rocks (PBRs) in Massachusetts, New Hampshire, and southwestern Maine to evaluate the estimated probabilistic seismic hazard (PSH) from the U.S. Geological Survey’s National Seismic Hazard Model (NSHM), and also develop a map of maximum postglacial earthquake magnitudes in the region. The PBRs are erratic boulders left behind by the retreat of the Laurentide ice sheet between 13 and 18 ka, and published ice retreat maps are used to estimate their fragility ages. The fragilities and ages of the rocks appear to be consistent with the NSHM, in that the estimated earthquake magnitudes and resulting ground motions that would topple them are only expected on timescales longer than their fragility ages. This result, on the North American passive margin, contrasts with PBR studies at active plate boundaries, where the PBR constraints imply large reductions to estimated PSH. It may be that the PBRs are not old enough in the eastern United States to reveal the same PSH modeling issues as those revealed in the plate boundary settings. The study provides constraints on maximum magnitudes of postglacial earthquakes across much of Massachusetts, New Hampshire, and southwestern Maine, with the constraints limited to the ages of the PBRs.

Maine. Massachusetts, New Hampshire↗
USGS2025

Examining the compositional selectivity of hydrocarbon oxidation products using liquid–liquid extraction and solid-phase extraction techniques

The effect of extraction methods on detecting hydrocarbon oxidation products (HOPs) in groundwater remains unclear. HOPs are polar, water-soluble byproducts of petroleum biodegradation. Our previous work showed that liquid–liquid extraction (LLE), a method commonly used in regulatory monitoring, has a significantly lower extraction efficiency for HOPs compared to solid-phase extraction (SPE). In this study, we evaluate the analytical limitations and compositional selectivity of LLE and SPE using groundwater samples from the Bemidji, MN, crude oil spill site. Optical properties were characterized using excitation–emission matrix spectroscopy (EEMs), and a three-component PARAFAC model was validated, showing consistent trends across both extracts and whole water samples. Ultrahigh-resolution mass spectrometry (UHR-MS) revealed that LLE selectively recovered aliphatic-like compounds but underrepresented more polar oxygenated HOPs. In contrast, SPE methods were more effective at isolating highly oxidized compound classes. These differences were consistent across a gradient of contamination. Overall, the LLE was less precise and less representative of polar HOPs, introducing bias in the characterization of HOPs. This study is the first to quantitatively demonstrate the compositional selectivity and analytical bias of LLE versus SPE for HOPs using combined EEM-PARAFAC and UHR-MS techniques, with implications for long-term monitoring and site assessment protocols.

Environmental Science and Technology↗
USGS1997

Application of acoustical methods for estimating water flow and constituent loads in Perdido Bay, Florida

Water flow and quality data were collected from December 1994 to September 1995 to evaluate variations in discharge, water quality, and chemical fluxes (loads) through Perdido Bay, Florida. Data were collected at a cross section parallel to the U.S. Highway 98 bridge. Discharges measured with an acoustic Doppler current profiler (ADCP) and computed from stage-area and velocity ratings varied roughly between + or - 10,000 cubic feet per second during a typical tidal cycle. Large reversals in flow direction occurred rapidly (less than 1 hour), and complete reversals (resulting in near peak net-upstream or downstream discharges) occurred within a few hours of slack water. Observations of simultaneous upstream and downstream flow (bidirectional flow) were quite common in the ADCP measurements, with opposing directions of flow occurring predominantly in vertical layers. Continuous (every 15 minutes) discharge data were computed for the period from August 18, 1995, to September 28, 1995, and filtered daily mean discharge values were computed for the period from August 19 to September 26, 1995. Data were not computed prior to August 18, 1995, either because of missing data or because the velocity rating was poorly defined (because of insufficient data) for the period prior to landfall of hurricane Erin (August 3, 1995). The results of the study indicate that acoustical techniques can yield useful estimates of continuous (instantaneous) discharge in Perdido Bay. Useful estimates of average daily net flow rates can also be obtained, but the accuracy of these estimates will be limited by small rating shifts that introduce bias into the instantaneous values that are used to compute the net flows. Instantaneous loads of total nitrogen ranged from -180 to 220 grams per second for the samples collected during the study, and instantaneous loads of total phosphorous ranged from -10 to 11 grams per second (negative loads indicate net upstream transport). The chloride concentrations from the water samples collected from Perdido Bay indicated a significant amount of mixing of saltwater and freshwater. Mixing effects could greatly reduce the accuracy of estimates of net loads of nutrients or other substances. The study results indicate that acoustical techniques can yield acceptable estimates of instantaneous loads in Perdido Bay. However, estimates of net loads should be interpreted with great caution and may have unacceptably large errors, especially when saltwater and freshwater concentrations differ greatly.

Florida↗
USGS2025

Geochemical processes related to mined, milled, or natural metal deposits in a rapidly changing global environment

The demand for metals and raw materials, such as nickel and copper, has been projected to expand in the coming decades, driven by the global energy transition, the need for green technologies, and expanding infrastructure. Consequently, the increasing extraction and production of mining waste can have adverse impacts on surrounding environments and human health. The aim of this thematic collection is to fill critical knowledge gaps in the present-day cycles of metal(loid)s from source to larger sinks, and the effect of environmental management, anthropogenic development, and climate change. Altogether, the studies have been conducted in different natural settings around the world and comprise investigations in laterites, a soil-medicinal plant system, watersheds, and banded iron formations, among others. The geochemical applications in tracing mineralization, its secondary products, and/or potential impact on the immediate environment are highly diverse with applied tools ranging from isotope tracers to major and trace element systematics. Particularly the use of rare earth elements, their patterns and anomalies are methods employed by several studies in this collection. We summarize the findings to offer a potential future direction for the use of geochemical tracing techniques in resource exploration in the context of climate change and environmental challenges.

Geochemistry: Exploration, Environment, Analysis↗
USGS2025

Protected from Pterygoplichthys? Predicting thermal habitat suitability for nonnative armored catfish in the Suwannee River

Objective Nonnative fishes can modify ecosystems and harm economies when they are introduced to new environments. Climate change is likely to assist the spread and establishment of some nonnative fishes (e.g., warmwater species), but spatiotemporal gaps in water temperature monitoring and modeling may prevent ecologists and managers from forecasting thermal habitat suitability for these taxa. The purpose of this study was to develop a predictive model of winter water temperatures and thermal habitat suitability for two priority nonnative armored catfish, Vermiculated Sailfin Catfish Pterygoplichthys disjunctivus and Orinoco Sailfin Catfish P. multiradiatus , in the Suwannee River, Florida and Georgia. Methods Precipitation- and groundwater-corrected air–water temperature models were developed and evaluated using a model selection procedure to predict water temperatures at four sites in the Suwannee River. These models were chosen because they blend the simplicity of air–water temperature models with the accuracy of hydrometeorological models to create an efficient, economical, management-relevant approach for analyzing and forecasting water temperature. Results Most of the top-performing water temperature models (92%) had precipitation or groundwater corrections to air–water temperature formulations. Projected mean and maximum water temperatures increased as simulated climate change intensified. All four Suwannee River sites studied were projected to be thermally hospitable to the survival of Vermiculated Sailfin Catfish. Lower river sites, noticeably warmer than upper river sites, were conducive to the survival of Orinoco Sailfin Catfish throughout the winter months. The upper river sites were too cold for Orinoco Sailfin Catfish survival in some climate-change scenarios, but the Suwannee River has an abundance of constant-temperature springs that are likely hospitable to Vermiculated Sailfin Catfish and Orinoco Sailfin Catfish throughout the year. Conclusions The findings suggest that winter water temperatures will likely not be a barrier to the survival of Pterygoplichthys catfish in the Suwannee River, amplifying the importance of conservation and management approaches to inhibit their spread and establishment. If the Pterygoplichthys population remains small and isolated and decision makers are able to devote required staff time and resources to managing these species, removal and eradication at local if not broader scales may be reasonable goals. This study provides a water temperature modeling approach that can aid ecologists and managers in prioritizing sites to prevent the introduction, slow the dispersal, eradicate, and control Pterygoplichthys catfish and other nonnative fishes in the Suwannee River and beyond.

Florida, Georgia↗
USGS2026

Prioritizing resource protection and understanding potential susceptibility of springs to surficial changes in a low-temperature geothermal system

Geothermal systems are vulnerable to changes in water budget and composition, requiring science-based management. This study uses a dataset of spring water temperatures, time series of groundwater residence time tracers (tritium and carbon-14), and stable isotopes of water to understand geothermal flow in a low-temperature geothermal system in north west Colorado, United States (Steamboat Springs). The geothermal system is bisected by the Yampa River, necessitating a stream mass balance approach to quantify total discharge. Time series analysis of water temperature data provides a ranked list of features more susceptible to surficial changes, which is corroborated using time series of tritium which indicate spatially distinct patterns of mixing between modern and pre-modern groundwater. All springs contain a portion of pre-modern groundwater that is thousands to tens of thousands of years old, a period coinciding with melting of extensive Pleistocene glaciers that was likely one of the recharge sources to the geothermal system. Stream mass balance indicates that greater than 80% of the total geothermal discharge is derived from diffuse or small springs, highlighting the extensive nature of the geothermal outflow zone and the association with local geologic structures. This study provides baseline data to support management of the Steamboat Springs geothermal system and indicates the utility of these approaches in developing science-based geothermal management.

Colorado↗
USGS2026

Orientation dependence of probabilistic seismic hazard estimates from CyberShake physics-based simulations

Earthquake ground‐motion intensities, such as pseudospectral accelerations (SAs), can vary significantly with horizontal orientation. However, conducting probabilistic seismic hazard analysis (PSHA) for each horizontal orientation is challenging because current ground‐motion models used in PSHA consider only a single horizontal intensity value, usually the median across all orientations, known as RotD50. To address this limitation, we employ physics‐based simulations for PSHA, which contain full waveforms from which ground‐motion intensities can be computed for all horizontal orientations to study directional seismic hazard. We apply our approach to the latest CyberShake study of the Greater Los Angeles metropolitan area, developed by the Statewide California Earthquake Center, finding that seismic hazard at a 2475‐yr return period, a common value used for earthquake‐resistant design, varies significantly with horizontal orientation. For instance, for SAs at 3 s, the maximum seismic hazard across all horizontal orientations is, on average, 15% higher than the median RotD50 hazard, with these differences becoming more pronounced at longer periods. These observed variations can generally be attributed to physical mechanisms that polarize seismic waves, such as the radiation pattern of the earthquake source and the influence of the subsurface structure. These results may have important implications for earthquake engineering applications, particularly for long‐period structures in areas with substantial horizontal variations in seismic hazard.

California↗
USGS2026

Morphodynamics of snow barchans at Concordia Station, Antarctica

Barchans are crescent-shaped dunes that form and migrate under unimodal wind regimes in areas of low sediment availability. While sand barchan morphodynamics has been extensively studied, snow barchans remain poorly documented. Here, using hourly time-series images taken near Concordia Station, Antarctica, we measure the sizes (lengths 0.3 m to 13 m, widths 0.4 m to 7.5 m) and migration rates (0.13 m h −1 to 3.5 m h −1 ) of 44 populations of snow barchans during 2017–2022. We compare this dataset with established height–velocity and length-width relationships for sand barchans in both air and water. Our results show that snow barchans follow the same scaling as sand barchans, allowing us to estimate a characteristic sintering (bonding of snow particles) time of about one day. This sintering process limits the size of snow barchans when active, reduces their aspect ratios, and, once wind falls below the transport threshold, explains their preservation over a few years. During wind events, migrating barchans are too small to maintain their shape and orientation, making them highly responsive to fluctuations in wind direction. Thus, studying snow barchans improves understanding of an elementary bedform encountered in multiple environments and also of the surface properties of snow on different timescales, offering insights into snow accumulation and wind-blown snow in ice cores.

Geomorphica↗
USGS2026

High‐resolution surface deformation and slip distribution observations for the 2023 Kahramanmaraş, Türkiye, earthquake sequence help constrain the rupture process

Splay, or branch, faults are a common geometric feature of earthquake surface ruptures and may provide constraints on the rupture behavior of an earthquake. The 2023 M w 7.8 Pazarcık and M w 7.5 Elbistan, Türkiye, earthquakes are examples of ruptures with multiple small splays, and the Pazarcık earthquake nucleated on a splay fault, the Narlı fault, before rupturing bilaterally on the East Anatolian fault (EAF). Here, we present 3‐m‐resolution surface displacement from subpixel correlation of Planet Dove optical images for the entirety of both ruptures with corresponding surface slip distributions. For a 30‐km‐long study region spanning the Narlı‐EAF intersection, we compare surface slip derived from five data sets with different resolutions (on‐the‐ground, WorldView, Planet Dove, Sentinel‐2, and Sentinel‐1) to elucidate complementary information. In addition, we integrate information from the surface expression of faulting with published dynamic rupture simulations and rupture process studies to constrain a rupture evolution for the Pazarcık earthquake that is consistent across data sets. This work highlights the complementary nature of disparate surface slip data sets and the role that high‐resolution surface displacement information, including from fault splays, can play in constraining nonunique rupture models and refining understanding of the earthquake rupture process.

Bulletin of the Seismological Society of America↗
USGS2025

Geochemistry and Soils of the Big Smoky Valley Fens, Nevada

Fens are groundwater-fed wetlands that can provide habitat for plants and animals. Due to anthropogenic activities and climate change, many fens around the world are at risk. This paper presents the results of a study of the hydrology and geochemistry of fens in Big Smoky Valley, central Nevada to support the Bureau of Land Management’s activities in the area. A water sample from the largest fen in the study area was analyzed for its water chemistry and compared to a nearby alluvial aquifer and hot spring. The high SiO 2 concentration of the fen sample implies that the fen water may originate from geothermal water. A soil core was taken to analyze radiocarbon age and soil type. A majority of the core was composed of silt and clay interlayered with water-filled voids. Changes in the character of the clay with depth suggest that there may have been changes in the depositional environment over time. Radiocarbon dating of Ruppia seeds showed longevity of the fen, with the minimum 14 C age of the core as 4,375±40 years. This paper provides reconnaissance-level information on the Big Smoky Valley fens, but further information would be needed to better understand the source of water to the fens or how the fen environment has changed over time with climate.

Nevada↗
USGS2026

Per- and polyfluoroalkyl substances in waters associated with oil and gas development in the Denver Basin

Use of per- and polyfluoroalkyl substances (PFAS) in the petroleum industry could be a cause for concern due to the large volumes of produced water (PW) generated during oil and gas extraction, the reuse of these wastes in water-stressed regions, and adverse health outcomes related to PFAS exposures. However, PW PFAS characterization is nearly absent in the literature, and hydraulic fracturing (HF) chemical disclosures often omit the identities of additives as proprietary. Here we evaluate PFAS in PW samples from three petroleum wells in the Denver Basin during their first year of production. Total concentrations of targeted PFAS (Σ 40 PFAS) were < 35 ng/L in PW samples, with short-chain PFAS like perfluorobutanoic acid persisting throughout the sampled duration. Analysis of freshwater inputs for hydraulic fracturing (Σ 40 PFAS ~ 113 ng/L) and mixed fracture fluid (Σ 40 PFAS ~ 69 ng/L) indicated much of the targeted PFAS content was derived from the input water, and not from HF additives, however samples subjected to oxidation indicated the presence of PFAS precursors that would not be detected by targeted analysis. This study highlights that while PFAS content is low in the studied PWs, the potential for redistribution of PFAS in the environment may be a consideration for reuse applications.

Colorado, Nebraska, Wyoming↗
USGS2024

Characterizing directivity in small (M 2.4-5) aftershocks of the Ridgecrest sequence

Directivity, or the focusing of energy along the direction of an earthquake rupture, is a common property of earthquakes of all sizes and can cause increased hazard due to azimuthally dependent ground‐motion amplification. For small earthquakes, the effects of directivity are generally less pronounced due to reduced rupture size, yet the directivity in small events can bias source property estimates and provide important insights into general regional faulting patterns. However, due to observational limitations, directivity is usually only measured and modeled for large events. As such, many studies of small earthquakes either ignore directivity altogether or assume a constant rupture direction for all events in a cluster. In our study, we apply a refined directivity fitting method constrained with two separate methods of source deconvolution to the dataset of aftershocks of the 2019 Ridgecrest earthquakes, which contain a large number of well‐recorded small‐to‐mid sized earthquakes occurring in close proximity to each other. The revealed directivity of 100+ small (M 2.4–5) earthquakes is highly heterogeneous and primarily oblique to and away from the main fault strike, suggesting a complex postseismic stress redistribution. In addition, the energy focusing effect of directivity appears to bias the selection of high‐quality data from stations in the direction of rupture, leading to average stress‐drop increases of 50% if directivity is not accounted for.

California↗
USGS2025

Detecting hidden sedimentary geothermal systems in the Upper Colorado River Basin

Geothermal resources exist in sedimentary rock where circulation of water for efficient extraction or storage of heat is possible. Except in rare instances where hot water is expressed at the land surface, sedimentary geothermal resources are hidden, so the identification of these systems is optimally accomplished using predictive subsurface modeling. An integrated approach using detailed paleogeographic interpretations, subsurface geologic mapping, and numerical modeling has produced regional geologic and temperature models for the Upper Colorado River Basin, a large watershed in central North America that contains many sedimentary basins. These models identify areas of hidden sedimentary geothermal resource potential in low temperature (<90°C), moderate temperature (90–150°C), and high temperature (>150°C) fairways across the study area. These models incorporate maps of key horizons in outcrop and the subsurface to create a robust structural framework that can be used to target favorable geology for natural or engineered permeability. This framework is populated with lithologies derived from detailed palaeogeographical maps and over 40,000 bottom hole temperature (BHT) values were used to create a calibrated three-dimensional (3D) temperature model across the region. The resulting maps serve as a regional sedimentary geothermal play fairway screening tool for evaluating different grades of sedimentary geothermal resources and for identifying areas of interest where more detailed, prospect-scale studies can be undertaken.

Arizona, Colorado, New Mexico, Utah, Wyoming↗
USGS2026

From landslide susceptibility to risk assessment in the conterminous U.S.

Understanding the spatial distribution of landslide prone-areas and what consequences they may have is important for risk management and land-use planning. In the United States, although landslides occur in every state, a comprehensive landslide risk assessment is still missing. Existing efforts, such as the Federal Emergency Management Agency (FEMA)’s National Risk Index, rely on aggregated products and coarse cartographic units, limiting their geomorphological and practical accuracy. In this study, we present a methodological advance for landslide risk assessment across large areas with incomplete and sparse data. We apply our procedures to the conterminous United States by integrating geomorphologically meaningful partitions and spatial and temporal probability data-driven models. Landslide susceptibility is estimated using a Generalized Additive Mixed Model incorporating a bias capture/correction scheme to account for inventory inaccuracies (reference Area Under the Curve = 0.75). The exceedance probabilities of landslide occurrence are defined for three temporal scenarios (2, 5, and 10 year). Then, we explore the associated potential economic consequences for human settlements and agricultural areas. The findings indicate that the spatial variability of risk is primarily controlled by exposure rather than by susceptibility/hazard alone. The mean risk increases by ∼170% from the 2-year to the 10-year scenario. Beyond its quantitative outcomes, this study offers a blueprint for continental or sub-continental scale landslide risk assessments, demonstrating both the opportunities and current limitations.

Engineering Geology↗
USGS1997

Hydrologic and water-quality conditions in the Horse Creek basin, west-central Florida, October 1992-February 1995

A baseline study of the 241-square-mile Horse Creek basin was undertaken from October 1992 to February 1995 to assess the hydrologic and water-quality conditions of one of the last remaining undeveloped basins in west-central Florida. During the period of the study, much of the basin remained in a natural state, except for limited areas of cattle and citrus production and phosphate mining. Rainfall in 1993 and 1994 in the Horse Creek basin was 8 and 31 percent, respectively, above the 30-year long-term average. The lowest and highest maximum instantaneous peak discharge of the six daily discharge stations occurred at the Buzzard Roost Branch and the Horse Creek near Arcadia stations with 185 to 4,180 cubic feet per second, respectively. The Horse Creek near Arcadia station had the lowest number of no-flow days with zero days and the Brushy Creek station had the highest number with 113 days. During the study, the West Fork Horse Creek subbasin had the highest daily mean discharge per square mile with 30.6 cubic feet per second per square mile, and the largest runoff coefficient of 43.7 percent. The Buzzard Roost Branch subbasin had the lowest daily mean discharge per square mile with 5.05 cubic feet per second per square mile, and Brushy Creek and Brandy Branch shared the lowest runoff coefficient of 0.6 percent. Brandy Branch had the highest monthly mean runoff in both 1993 and 1994 with 11.48 and 19.28 inches, respectively. During the high-baseflow seepage run, seepage gains were 8.87 cubic feet per second along the 43-mile Horse Creek channel. However, during the low-baseflow seepage run, seepage losses were 0.88 cubic foot per second. Three methods were used to estimate average annual ground-water recharge in the Horse Creek basin: (1) well hydrograph, (2) chloride mass balance, and (3) streamflow hydrograph. Estimated average annual recharge using these three methods ranged from 3.6 to 8.7 inches. The high percentage of carbonate plus bicarbonate analyzed at the Carlton surficial aquifer well could indicate an upward ground-water flow from the underlying intermediate aquifer system. Based on constituent concentrations in water samples from the six daily discharge stations, concentrations generally are lower in the upper three subbasins, West Fork Horse Creek, Upper Horse Creek, and Brushy Creek than in the lower three subbasins. Typically, concentrations were highest for major ions at Buzzard Roost Branch and nutrients at Brushy Creek.

Florida↗
USGS2025

Estimated ultimate recovery (EUR) Prediction for Eagle Ford Shale using integrated datasets and artificial neural networks

The estimated ultimate recovery (EUR) is an important parameter for forecasting oil and gas production and informing decisions regarding field development strategies. In this study, we combined site-specific geologic, completion, and operational parameters with the predictive capabilities of machine learning (ML) models to predict EURs of the wells for the Eagle Ford Marl Continuous Oil Assessment Unit. We developed an extensive dataset of wells that have produced from the lower and upper Eagle Ford Shale intervals and reduced the model complexity using principal component analysis. We tested the ML models and estimated the sensitivities of ML-predicted EURs to changes in the values of different input variables. The results of applying the optimized ML model to the Eagle Ford suggest that the approach developed in this study could be promising. The ML estimates of the EURs fit the DCA-based values with an R 2 ~ 0.9 and a mean absolute error of ~36 × 10 3 bbl. In the lower Eagle Ford Shale, the EUR estimates were found to be most sensitive to changes in porosity, net thickness of the interval, clay volume, and the API gravity of the oil; and that in the upper Eagle Ford Shale they were most sensitive to changes in the total organic carbon and water saturation, which suggests that it could be important to consider these parameters in assessing these intervals or close analogs.

Louisiana, Mississippi, Texas↗