SEARCH · USGS Science

Results for “Remote Sensing Applications: Society and Environment”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

1,658 records · Page 44Linked to original sources

USGS2026

Guidelines for producing integrated 210Pb and 14C age-models

Accurate reconstructions of past environmental changes are crucial in paleoecological research and require reliable chronologies of sedimentary archives. Establishing robust age-models and obtaining the most appropriate proxies for analysis is a complex scientific endeavor, requiring extensive resources and collaboration among specialists, including radiochronologists. Radiometric dating methods, such as 210 Pb and radiocarbon ( 14 C), are frequently employed to establish chronologies in aquatic sedimentary deposits and peat bogs. In this study, we review key aspects of sampling, analysis, and the principles underlying 210 Pb and 14 C age-models, focusing on methods for developing robust joint chronologies for paleoenvironmental research. Drawing largely from the authors' experiences and group discussions during and after a scientific workshop in 2022, we discuss important considerations for site selection, sampling strategies, and radiometric dating to construct integrated 210 Pb and 14 C age-models. Using expert consensus, this group – called Paleostats – aims to provide a set of best practices for other geochronologists with this methods paper. Among our conclusions, we emphasize the importance of accounting for site-specific factors such as prior information on sedimentation rates to establish appropriate sampling and analytical strategies. The use of appropriate coring devices can minimize disturbance to sediments and ensure the core surface remains intact and preserved until sectioning. Where excess 210 Pb is expected, sectioning at intervals of ≤1 cm provides an adequate sampling resolution for 210 Pb dating. Exceptions are possible, allowing for ~2–3 cm sections in areas with confirmed high sedimentation rates (e.g., > 1 cm yr −1 ). Recovering deeper core sections for 14 C dating with sufficient overlap allows for accounting errors in depth estimates made in the field. Special attention is advised during time intervals where validation proxies, such as the human-made radionuclides 137 Cs or post-bomb 14 C, are expected, and to determine the depth of secular equilibrium between 210 Pb and 226 Ra. Radiocarbon analyses are commonly performed by accelerator mass spectrometry, and age models are constructed mainly using Bayesian statistics with Markov Chain Monte Carlo techniques (e.g., Bacon ). A Bayesian approach ( Plum ) is now available for producing 210 Pb age-models, which infers the 210 Pb ex flux, eliminates the need for selecting an equilibrium depth, and allows dating cores with incomplete 210 Pb ex inventory. Plum offers improved chronologies by integrating raw 210 Pb and 14 C data, and these age-models can be enriched with other dating methodologies, such as identifying tephras and other well-recorded historical events. Harmonized reporting would contribute to making radiometric age-models reproducible, which would benefit from an international effort. Using 210 Pb and 14 C to produce integrated age-models may yield better insights into the interplay between natural and recent anthropogenic forcings on ecosystems. This can enhance our understanding of environmental processes and their impacts on climate change, ultimately supporting science-based assessments and decisions.

Earth-Science Reviews↗

USGS2024

Surficial geology and Quaternary fault map of the Las Vegas Valley, Clark County, Nevada

The Surficial Geology and Quaternary Fault Map of the Las Vegas Valley, Clark County, Nevada is a 1:50,000-scale compilation of published 1:24,000-scale geologic maps integrated with new field and desktop mapping. This geologic map compilation and GIS database are part of a broader study on the Quaternary faults in the Las Vegas Valley, the results of which are summarized in this report. The map compilation utilized a variety of digital base maps to evaluate the characteristics of surficial deposits and Quaternary fault scarps including lidar data in undeveloped parts of the valley and orthorectified historical aerial photos in the urbanized center of the valley. The map distinguishes twenty surficial map units including alluvial-fan and ephemeral-wash deposits, groundwater discharge deposits of the Las Vegas Formation, and alluvium deposits of Las Vegas Wash. Quaternary faults include the Quaternary Las Vegas Valley fault system in the center of the valley and the Frenchman Mountain fault system along the eastern margin. All Quaternary fault traces in the valley were evaluated, and the previously published fault mapping was modified as needed. The new mapping and uniform correlation of surficial deposits displaced by Quaternary faults yields a consistent valley-wide characterization of the recency of fault activity. The map and GIS database include a Quaternary geochronology compilation of 119 previously published surficial deposit ages of various types, 35 new luminescence ages, and 3 new radiocarbon ages. The new age data further bracket the ages of the Las Vegas basin Quaternary stratigraphy and provide new constraints on the timing of Quaternary fault activity.

Nevada↗

USGS2026

Creation of aerial camera system boresight installations in Bangor, Maine; Monroe, Louisiana; and Bassville Park, Florida

Aerial camera systems rely on boresights for defining internal and external metrics. The U.S. Fish and Wildlife Service’s Migratory Bird Surveys Branch required boresights to calibrate their camera systems for creating georeferenced imagery that can then be used in geographic information systems. The U.S. Geological Survey created high-accuracy boresight installations in Bangor, Maine, in July 2024; Monroe, Louisiana, in September 2024; and Bassville Park, Florida, in January 2025 to provide this metric-defining capacity to the U.S. Fish and Wildlife Service. This U.S. Geological Survey Data Report details the methods and results of the boresight installation process and provides camera operators with the data needed to use each of the installations.

Florida, Louisiana, Maine↗

USGS2025

High-pass corner frequency selection and review tool for use in ground-motion processing

Raw seismological waveform data contain noise from the instrument’s surroundings and the instrument itself that can dominate recordings at low and high frequencies. To use these data in ground‐motion modeling, the effects of noise on the signals must be reduced and the signals’ usable frequency range identified. We present automated procedures to efficiently reduce low‐frequency noise that are implemented in the software package gmprocess. These procedures check for, and as needed remove, low‐frequency artifacts in the displacement record using polynomial fits, which can be used in combination with existing signal‐to‐noise ratio (SNR)‐based corner‐frequency selection procedures. The automated selections are then efficiently verified and refined using a graphical user interface (GUI) that plots relevant ground‐motion time series and spectra and tracks modifications to signal processing parameters. We demonstrate these procedures using recordings from the 2020 M 5.1 Sparta, North Carolina, and the 2013 M 4.7 southern Ontario earthquakes. Data processed with the SNR‐only and polynomial criteria for these events contain displacement artifacts in 37% and 23% of processed traces, respectively. Records with remaining artifacts are corrected manually using the GUI. These processing steps illustrate the workflow for efficient data processing with quality control.

Seismological Research Letters↗

USGS2025

U.S. Geological Survey science strategy to address white-nose syndrome and bat health in 2025–2029

Since its discovery in 2006, the fungal disease known as white-nose syndrome (WNS) has killed millions of bats. Of the 47 bat species native to the conterminous United States, Alaska, Hawaii, and Canada, 12 have been affected by WNS, including 3 endangered species and 1 proposed endangered species. WNS has also been detected in 40 States and 9 Canadian Provinces. U.S. Geological Survey (USGS) scientists have been critical in identifying the causal fungus for WNS ( Pseudogymnoascus destructans [Pd]), characterizing the effects of WNS, and tracking the spread of Pd in many bat populations in North America. The mission of the USGS WNS and Bat Health Science Team is to deliver integrated science in order to build resiliency into free-ranging bat populations through more effective WNS management, build capacity for bat health science, and enhance bat health information sharing across USGS science centers and cooperative research units as well as with stakeholders. The USGS can play an important role in supporting regional and national capacity building by providing resources and guidance to local, State, and Tribal management entities and by providing tools to enhance disease management. The USGS Ecosystems Mission Area’s Biological Threats and Invasive Species Research Program is the lead Federal program for free-ranging wildlife disease research and surveillance. As of 2024, guided by the science priorities set by the WNS Steering Committee, USGS scientists are engaged in a nationwide response to WNS. This work is done in close coordination with our partners at the U.S. Fish and Wildlife Service, National Park Service, Bureau of Land Management, U.S. Forest Service of the U.S. Department of Agriculture, U.S. Department of Defense, as well as State and Tribal agencies. In addition to conducting WNS research, the USGS is mapping the spread of WNS and coordinating the North American Bat Monitoring Program (NABat) to understand how WNS and other stressors affect the status and trends of native bats across their range. The USGS is supporting the national WNS response through four science goals: (1) provide situational awareness on the health of bat populations; (2) conduct ecological studies of bats along the gradient of disease vulnerability; (3) contribute actionable science to enhance the resiliency of bat populations; and (4) implement an adaptive, holistic approach to bat health.

Circular↗

USGS2026

Geochemical, mineralogical, and isotopic evidence for multi-stage genesis of the Hicks Dome REE + Y-HFSE-fluorite deposit, Illinois, USA

Hicks Dome hosts breccias enriched in rare earth elements (REE), Y, Th, F, Ba, Ti, Nb, and Be, alongside spatially associated lamprophyre dikes (ca. 271 Ma). Hicks Dome is located within the Illinois–Kentucky Fluorspar District, which hosts fluorite, Pb–Zn, and barite resources. This study investigates the genetic relationships between Hicks Dome mineralization in breccias, alkaline magmatism, and Illinois–Kentucky Fluorspar District mineralization. Lamprophyre dikes are light REE–enriched with chondrite-normalized abundances decreasing from La to Lu. The Host Breccia exhibits middle and heavy REE–enriched patterns that mirror those of the principal REE–Th host minerals, including fluorapatite, xenotime, and thorite. Textural evidence suggests recrystallization of phosphates, sulfates, and Ti–Nb oxides in the Host Breccia. U–Pb geochronology constrains multiple mineralizing events, with ages of 277 ± 18 Ma from low-Th apatite interpreted as main-stage mineralization, and 121.6 ± 9.7 Ma from high-Th apatite indicating later overprinting. O–H–C stable isotope data provide evidence for multiple stages of fluid-rock interaction and fluid mixing: (1) early magmatic fluids dissolved limestone country rock, (2) mixing between magmatic fluids and basinal brines led to main-stage mineralization in the Host Breccia, and (3) late-stage mineralization occurred following mixing of meteoric water and basinal brine. These results indicate that heavy REEs, high field strength elements, and fluorine precipitated proximal to its alkaline magmatic source because of fluid–rock interactions and fluid mixing. Subsequent fluid mixing drove late-stage recrystallization and additional fluorite formation, a process that may be similar to mineralization in the Illinois-Kentucky Fluorspar District.

Illinois↗

USGS2024

Subduction zone geometry modulates the megathrust earthquake cycle: Magnitude, recurrence, and variability

Megathrust geometric properties exhibit some of the strongest correlations with maximum earthquake magnitude in global surveys of large subduction zone earthquakes, but the mechanisms through which fault geometry influences subduction earthquake cycle dynamics remain unresolved. Here, we develop 39 models of sequences of earthquakes and aseismic slip (SEAS) on variably-dipping planar and variably-curved nonplanar megathrusts using the volumetric, high-order accurate code tandem to account for fault curvature. We vary the dip, downdip curvature and width of the seismogenic zone to examine how slab geometry mechanically influences megathrust seismic cycles, including the size, variability, and interevent timing of earthquakes. Dip and curvature control characteristic slip styles primarily through their influence on seismogenic zone width: wider seismogenic zones allow shallowly-dipping megathrusts to host larger earthquakes than steeply-dipping ones. Under elevated pore pressure and less strongly velocity-weakening friction, all modeled fault geometries host uniform periodic ruptures. In contrast, shallowly-dipping and sharply-curved megathrusts host multi-period supercycles of slow-to-fast, small-to-large slip events under higher effective stresses and more strongly velocity-weakening friction. We discuss how subduction zones' maximum earthquake magnitudes may be primarily controlled by the dip and dimensions of the seismogenic zone, while second-order effects from structurally-derived mechanical heterogeneity modulate the recurrence frequency and timing of these events. Our results suggest that enhanced co- and interseismic strength and stress variability along the megathrust, such as induced near areas of high or heterogeneous fault curvature, limits how frequently large ruptures occur and may explain curved faults' tendency to host more frequent, smaller earthquakes than flat faults.

Journal of Geophysical Research: Solid Earth↗

USGS2025

Measurement of in situ-produced cosmogenic nuclides in fine-grained quartz from shale

In situ -produced 10 Be in quartz is widely used to constrain exposure ages and denudation rates, traditionally measured in sand-sized grains. Here we report a new method for isolating fine-grained quartz from shale and demonstrate its reliability for grain sizes down to single microns. Sequential dissolution tests and analyses of grain size separates show that meteoric 10 Be is eliminated and that recoil losses during cosmogenic nuclide production are balanced by implantation from other mineral grains. High-temperature combustion leads to diffusion of meteoric 10 Be into fine-grained quartz and must be used with caution.

Nuclear Instruments and Methods in Physics Researc↗

USGS2025

Earth Mapping Resources Initiative protocols—Sampling hard-rock mine waste and perpetual mine water sources

Supporting the overarching goal to evaluate critical minerals nationwide, the mine waste characterization effort in the U.S. Geological Survey (USGS) Earth Mapping Resources Initiative has created a series of protocols to standardize sampling carried out under this effort by the participating State geological surveys and their cooperators. The protocols are based on published, reviewed methods that can be deployed in the field. The protocols include (1) collecting and processing composite samples of mine and mill waste, including tailings, waste rock, gangue, heap leach piles, ore stockpiles, slag, or other mineralized and processed materials and (2) collecting and preserving water samples from perpetual or long-term mine water sources. The protocols also specify information to document on field sheets and detail the collection of geospatial data. The analytical methods used by the USGS and USGS contract laboratories are described in this report, including the data delivery pathway for USGS-derived data.

Scientific Investigations Report↗

USGS2024

Geophysical characterization of an alkaline‑carbonatite complex using gravity and magnetic methods at Magnet Cove, Arkansas, USA

The Magnet Cove alkaline‑carbonatite complex (MCC), located in the Ouachita Mountains of south-central Arkansas in the United States, hosts an extensive variety of rare rock types and critical mineral resources with physical properties (density and magnetization) that contrast significantly with the sedimentary rocks into which they have intruded. Newly acquired ground-based gravity and magnetic data were used to develop two-dimensional and three-dimensional geophysical models of the Cretaceous-aged Magnet Cove intrusive complex. The models reveal that the MCC: (1) widens out at middle crustal depths to as much 22 km across, and may reach a depth of 20 km; (2) has a total volume (exposed and subsurface) that may be over 800 km 3 ; (3) is likely connected at depth to other intrusions in the Arkansas alkaline province; and (4) has a geometry that is aligned with pre-existing structures such as the Reelfoot rift and the Ouachita orogenic belt, some of which were likely structurally controlled by the Precambrian crystalline basement and the continent-ocean transition zone buried beneath the Ouachita orogen. For the first time, the magnetic models of the MCC account for the presence of strong remanent magnetization. This results in a geophysical workflow necessary to accurately interpret magnetic anomalies over the much larger Arkansas alkaline province, its geologic and structural framework, and critical mineral potential.

Arkansas↗

USGS2026

Baseflow and snowmelt sustained streamflow in the Upper Colorado River Basin, 1986-2020

The Upper Colorado River Basin (UCRB) faces substantial water availability limitations. Although most streamflow originates as snowmelt, the partitioning of snowmelt between surface runoff and groundwater recharge and subsequent groundwater discharge to streams is highly uncertain. On average, over half of the streamflow in the UCRB is estimated to originate from groundwater discharge to streams, highlighting the importance of baseflow in sustaining surface water. However, the historical patterns of baseflow and streamflow, along with their variability over space and time and their specific sources, remain unknown at the basin scale. This study addresses those gaps by characterizing the sources and transport pathways of both baseflow and streamflow in the UCRB at a seasonal timestep from 1986 to 2020, including the lagged delivery of subsurface water to streams beyond the current season, using coupled models of baseflow and streamflow. Between 1986 and 2020, on average 63% of UCRB streamflow originated from baseflow. About half of this baseflow took longer than one season to reach streams, and outside the snowmelt season, baseflow was the dominant source of streamflow. Snowmelt was a key source of both baseflow and streamflow. Current season snowmelt contributed 33% of streamflow via runoff, and 22% of the 29% of streamflow that originated as current season baseflow via subsurface flow to streams. Over the study period, baseflow index (BFI) declined in headwaters and increased at mid-elevations. Springtime increases in BFI demonstrate the increasingly important role baseflow plays in water supply. Identifying the sources, locations, and timing of water that contributed to the UCRB outlet can inform management of water resources in the basin.

Arizona, Colorado, New Mexico, Utah, Wyoming↗

USGS2024

Cold blood in warming waters: Effects of air temperature, precipitation, and groundwater on Gulf Sturgeon thermal habitats in a changing climate

Objective In a changing climate, the effects of air temperature, precipitation, and groundwater on water temperature and thermal habitat suitability for Gulf Sturgeon Acipenser desotoi , listed as threatened under the U.S. Endangered Species Act, are not well understood. Hence, we incorporated these factors into thermal habitat models to forecast how Gulf Sturgeon may be affected by wide‐ranging climate change scenarios in 2024–2074. Methods Using data from the Choctawhatchee River, Florida, we developed precipitation‐ and groundwater‐corrected air–water temperature models, compared their accuracy with that of conventional air–water temperature models used in fisheries management, and projected future Gulf Sturgeon thermal habitat suitability for normal physiological functioning and fieldwork (i.e., population sampling and telemetry surgeries) in summer (May–August) under 16 climate change scenarios. Result Precipitation‐ and groundwater‐corrected models were more accurate than conventional air–water temperature models (mean improvement in adjusted R 2 = +0.45; range = +0.09 to +0.75). Water temperature was projected to warm at widely variable rates across climate change scenarios encompassing different air temperature, precipitation, and groundwater regimes. Importantly, Gulf Sturgeon summer aggregation areas were cooler and influenced more by precipitation and groundwater and less by air temperature than were non‐aggregation areas. If precipitation and groundwater—as drivers of cooling—become warm in a changing climate, summer aggregation areas were projected to exhibit thermal habitat degradation equivalent to or greater than that of non‐aggregation areas. Conclusion Our results add hydrological context to the premise that aggregation areas provide cool water and energetic savings for Gulf Sturgeon during summer, underscoring the importance of protecting these habitats through groundwater conservation, water quality monitoring, and riparian/watershed habitat management. Our findings indicate that identifying thermally appropriate times for fieldwork activities will be increasingly important and time‐restricted as climate change intensifies. However, our research provides managers with a portfolio of water temperature models and an accurate, cost‐effective, management‐relevant approach to forecasting thermal habitat conditions for Gulf Sturgeon and other species in a changing climate.

Alabama, Florida↗

USGS2025

Using peak geometry and shifts in the x-ray spectrum of carbon from electron probe microanalysis to determine thermal maturity of organic matter

During the burial of mudstones, the associated organic matter undergoes gradual thermal maturation, a key process that can influence the reactivity of organic matter during catagenesis, the formation of hydrocarbon deposits and the chemical weathering of mudstones. Conventional methods for assessing the thermal maturity of organic matter often fail to reflect the geochemical heterogeneity between individual organic phases in mudstone samples. Here, we report an alternative, non-destructive, surficial and micro-scale (analytical spot size of ~ 300 nm with about 4 μm diffusion depth for micrometre-size organic grains) method to evaluate the thermal maturity of organic matter in mudstones using the carbon K α X-ray spectrum measured by field emission-electron probe microanalyser (FE-EPMA). Using this method, we observed correlations between parameter values derived from FE-EPMA spectra, including the peak position, the peak area and the intra-sample heterogeneity of these measurements, and independently measured vitrinite/solid bitumen reflectance for a suite of mudstones, representing different age, geological context and burial depth. With the increased values in peak area and position, we identified an increase in the carbon mass fraction of organic matter and the mean nominal oxidation state of carbon approaching zero. These trends, which are consistent with aromatisation and graphitisation, provide the rationale for using FE-EPMA to estimate the thermal maturity of organic matter. To explore some of these trends in more detail, we employed time-of-flight secondary ionisation mass spectrometry, X-ray photoelectron spectroscopy and optical reflectance measurements on a subset of samples.

Geostandards and Geoanalytical Research↗

USGS2026

Investigation of drivers and sources of potential harmful algal blooms in Lake Anna, Virginia, 2023-24

Algal blooms in freshwater reservoirs are an increasing concern because of the risk to aquatic ecosystem health, recreational use, and water quality. Among the taxa that comprise an algal bloom, cyanobacteria are of particular concern due to the potential to produce toxic compounds which can cause acute and chronic illness in humans if ingested through contaminated water or shellfish. When toxins are above a toxin-specific threshold in the water column, the Commonwealth of Virginia categorizes the bloom as a harmful algal bloom (HAB), distinguishing it from an algal bloom without toxins present. Toxins are of particular concern in bodies of water which serve as major recreational areas, such as Lake Anna in central Virginia. Lake Anna is a 27 km-long and 47 km2 reservoir in central Virginia. Since the Commonwealth of Virginia revised the HAB monitoring framework in 2018, algal bloom advisories for potentially toxigenic blooms have been issued in the western, riverine zone of the reservoir. There were detections of microcystin and anatoxin production but no detections of cylindrospermopsin and saxitoxin production in Lake Anna; however, toxin concentrations were low, at values less than 0.65 µg/L. In 2023, the U.S. Geological Survey, in cooperation with Virginia Department of Environmental Quality, initiated a 19-month intensive and extensive study of western Lake Anna and its tributaries (North Anna River and Pamunkey Creek) to (1) characterize the algal community, biomass, and toxin production; (2) identify potential drivers leading to algal bloom initiation, persistence, and decline; and (3) assess the primary sources of the drivers contributing to algal blooms. Continuous and discrete monitoring of water quality within the lake, watershed inputs, meteorological conditions, and algal communities were monitored. Multiple modeling scenarios identified that the formation and persistence of algal blooms in Lake Anna are driven by interactions among chemical, macro- and micronutrient, and physical factors. Key drivers include total nitrogen, total phosphorus, water temperature, suspended sediment concentration, wind speed, copper, iron, molybdenum, nickel, sodium, and alkalinity. During this study, winter stormflow events delivered the highest loading of macro- and micronutrients from the tributaries to the lake. The lake is a sink for these nutrients in the water column or in the lake-bed sediments. During high-occupancy and recreation periods on the lake in the summer months, boating activity can promote internal loading by the resuspension of the lake-bed sediments, thereby increasing the nutrient availability for algal uptake. Thermal stratification and hypoxic conditions were observed, which can contribute to the passive release of nutrients into the water column, further facilitating algal bloom proliferation. These processes may create a positive feedback loop that supports the formation, persistence, and annual recurrence of algal blooms in the western region of Lake Anna. Continued water-quality monitoring of early warning indicators may improve the detection and forecasting of algal growth in the lake and help managers proactively manage water quality and algal growth.

EarthArXiv↗

USGS2026

Earthquake-hazard exposure of residents with potential access and functional needs in the United States

Earthquake response plans and earthquake early warning (EEW) systems designed for general populations may not consider potential access and functional needs (AFN) of individuals with physical, sensory, cognitive, or social limitations. Previous efforts to map the distribution of these populations have focused on social-vulnerability indices that ignore or oversimply these limitations. The descriptive and exploratory analysis summarized in this United States (U.S.) case study addresses this gap by identifying and integrating spatially explicit data for AFN-related residential populations, earthquake hazards, and county and county equivalents for the conterminous U.S., Alaska, Puerto Rico, and Hawaii. We focus on 13 AFN-related attributes that relate to an individual's ability to access information contained in an EEW alert, to understand and process earthquake information or observed ground shaking, and to take self-protective actions based on this information and physical cues of an earthquake. Depending on the demographic attribute, there are millions to tens of millions of U.S. residents with AFN-related attributes in areas considered to have varying likelihoods (2%, 10%, and 50%) of exceedance of a damaging earthquake in the next 50 years. Although these amounts represent low percentages at the national level, the percentage of individuals with AFN-related attributes in many counties and county equivalents substantially exceeds national percentages. No one county, county equivalent, U.S. state, or U.S. territory has the highest percentage of individuals in all AFN-related attributes; therefore, future efforts to increase individual resilience to earthquakes may benefit from understanding the local context of individuals with potential access and functional needs.

International Journal of Disaster Risk Reduction↗

USGS2025

Hydrogeologic characterization of the Cahuilla Valley and Terwilliger Valley Groundwater Basins, Riverside County, California

The relation between the groundwater and the amount of natural recharge to the Cahuilla Valley and Terwilliger Valley groundwater basins is not well understood. During the 20th century, the reliance on groundwater near Anza, California, used for agricultural, domestic, and municipal reasons has increased, and there is the potential for changes in groundwater availability related to climate change. Several types of existing data were evaluated, and new data were collected for this study, with the goal of characterizing the region’s hydrogeology. The study’s scope included constructing a geologic framework model to show where the groundwater-bearing units are present and their relation to each other, estimating the major components of the groundwater budget, and understanding local short-term and regional long-term groundwater flow and how that has changed since the early 1900s. Two electrical resistivity tomography surveys were done in the Durasno Valley about 2,150 feet apart to identify the thickness of the alluvium, its horizontal extent, and the depth-to-basement along two profiles perpendicular to Cahuilla Creek. The subsurface sediments were mostly horizontally layered and the transitional boundary between the alluvium and basement was thinner and shallower along the upgradient profile where the depth-to-basement was about 70 feet below land surface; the depth-to-basement at the downgradient profile was more than about 140 feet below land surface. The results from the surveys were used to place four monitoring wells at two sites along the survey profiles. Artesian flow from the deepest well at the downgradient site indicated that the decomposed and competent basement likely contributed some groundwater to the overlying alluvium, laterally, from below, or both. A digital three-dimensional geologic framework model was constructed using EarthVision software to represent the subsurface geometry of the alluvium, decomposed basement, and competent basement. Maps and cross sections of the modeled thicknesses of the alluvium and decomposed basement, and the modeled elevation of the top of the competent basement, were made to show the subsurface geometry of vertical faults, selected wells, and the groundwater-bearing units. Because natural recharge is related to the variable cycles of precipitation, estimates are difficult to quantify. Recharge and runoff have extreme interannual variability in the study area; recharge and runoff can be sporadic, and a substantive amount may not occur in some years. Estimates of recharge from a previous study and the regional-scale Basin Characterization Model for California for four different periods ranged from 3,800 acre-feet/year for 1897–1947 to 5,900 acre-feet/year for 1971–2000. Potential recharge from the disposal of domestic septic systems may have been as much as 500 acre-feet in 2020. It was estimated that between about 400 and 2,400 acre-feet/year of groundwater is lost through evapotranspiration by vegetation and evaporation from open water bodies, but the main source of discharge is through pumpage, mainly used for agriculture from the alluvium in the Cahuilla Valley and Terwilliger Valley groundwater basins. The estimated total pumpage for 1991–2021 ranged from about 1,140 acre-feet in 2019 to about 3,450 acre-feet in 1994. When summed, the cumulative amount of estimated pumpage between 1991 and 2021 was about 81,400 acre-feet. The general direction of groundwater flow is from the northeast along the San Jacinto fault zone at the headwaters of Cahuilla and Hamilton Creeks, to the surface-water outlets at the west and southeast parts of the study area. Groundwater-level data from the 1950s and earlier indicate that there was a natural groundwater divide between the Cahuilla Valley and Terwilliger Valley groundwater basins, but the changing magnitude and extent of the groundwater depressions caused by pumping since about 1950 indicate that the location of the natural groundwater boundary between the Cahuilla Valley and Terwilliger Valley groundwater basins has migrated over time. Flow from the upper to the lower parts of the Cahuilla Valley groundwater basin roughly follows the course of Cahuilla Creek through the narrow Durasno Valley where an estimated volume of flow in April 2019 was about 10–150 acre-feet/year. Short-term trends in groundwater levels, particularly in wells where groundwater is shallow and in the basement unit, show how some areas respond quickly to recharge and discharge. Wells located further to the east within the Cahuilla Valley groundwater basin in the alluvium show much less of a response to recharge events; areas of sustained pumpage from the alluvium, primarily for agriculture, show long-term declines in groundwater levels and generally do not show the effects of storm events or recent runoff. Groundwater levels in wells that are farthest from where most of the recharge occurs and where pumping has been the greatest, had some of the largest long-term groundwater-level declines at a rate of about 0.8 foot/year between 1971 and 2021.

California↗

USGS2026

Groundwater spatial variability within an atoll island: Assessing shallow aquifer heterogeneity with geophysical and physicochemical measurements

This study examines the spatial variability of shallow groundwater on Dhigelaabadhoo Island using electromagnetic induction surveys, groundwater monitoring, and sediment analyses. The research reveals how variations in island morphology—such as differences in elevation, reef flat width, and sediment composition—affect the spatial distribution of groundwater lenses and the overall aquifer dynamics. Saltwater intrusion is especially pronounced in low elevated areas, with narrow reef flat plate and areas where higher hydraulic conductivity—driven by the presence of coarser sediments—is observed, whereas regions characterized by finer sediments, higher elevation, and wider reef flat plates tend to support more symmetric and less saline groundwater lenses. The geophysical investigations reveal that tidal oscillations alter groundwater movement by markedly changing water levels and conductivity, thereby underscoring the critical need to account for temporal dynamics in atoll coastal aquifer systems and the importance of integrating tidal dynamics into the aquifer zone. The findings highlight the significant role of intrinsic morphological and external hydrodynamic factors in shaping groundwater distribution on atoll islands, offering critical insights for sustainable freshwater resource management.

Dhigelaabadhoo Island↗

USGS2022

New Hampshire and Landsat

At its widest point, a mere 80 miles separate the eastern and western borders of New Hampshire. Its northern and southern borders are just 175 miles apart. Even so, few States can boast as much rugged natural beauty per mile as the Nation’s fifth smallest. Nestled within New Hampshire are 93 State parks teeming with moose, Ursus americanus (Pallas, 1780; black bears), coyotes, beavers, river otters, and foxes. The largest section of White Mountain National Forest cuts across north-central New Hampshire, drawing visitors to its lakes, streams, mountain peaks, and hardwood forests. New Hampshire also is home to Lake Winnipesaukee, the State’s largest lake, notable for its floating post offices, the annual “ice-out” contest that sees residents vying to guess the date its surface ice dissipates, and its supporting role in films such as “On Golden Pond” and “What About Bob?” However, the scenic forests of New Hampshire face challenges in the form of invasive species such as Lymantria dispar (Linnaeus, 1758; spongy moth), Adelges piceae (balsam woolly adelgid), and Agrilus planipennis (emerald ash borer). In recent years, New Hampshire’s lakes and streams have seen more cyanobacterial blooms as well. The U.S. Geological Survey Landsat Program offers a consistent, reliable, and historically unmatched source of Earth observations that can aid in the mapping, monitoring, and management of New Hampshire’s land and water resources. Here are a few ways Landsat data have been used in the Granite State.

New Hampshire↗