USGS Science⌕ Search

SEARCH · USGS Science

Results for “Paper”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 793 records · Page 44Linked to original sources

Assessing contamination in Great Lakes sediments using benthic invertebrate communities and the sediment quality triad approach

Sediments in many Great Lakes harbors and tributary rivers are contaminated. As part of the USEPA's Assessment and Remediation of Contaminated Sediment (ARCS) program, a number of studies were conducted to determine the nature and extent of sediment contamination in Great Lakes Areas of Concern (AOC). This paper describes the composition of benthic invertebrate communities in contaminated sediments and is one in a series of papers describing studies conducted to evaluate sediment toxicity from three AOC's (Buffalo River, NY; Indiana Harbor, IN; Saginaw River, MI), as part of the ARCS Program. Oligochaeta (worms) and Chironomidae (midge) comprised over 90% of the benthic invertebrate numbers in samples collected from depositional areas. Worms and midge consisted of taxa identified as primarily contaminant tolerant organisms. Structural deformities of mouthparts in midge larvae were pronounced in many of the samples. Good concurrence was evident between measures of laboratory toxicity, sediment contaminant concentration, and benthic invertebrate community composition in extremely contaminated samples. However, in moderately contaminated samples, less concordance was observed between the benthos community composition and either laboratory toxicity test results or sediment contaminant concentration. Laboratory sediment toxicity tests may better identify chemical contamination in sediments than many commonly used measures of benthic invertebrate community composition. Benthic measures may also reflect other factors such as habitat alteration. Evaluation of non-contaminant factors are needed to better interpret the response of benthic invertebrates to sediment contamination.

Journal of Great Lakes Research↗

The geohydrologic setting of Yucca Mountain, Nevada

This paper provides a geologic and hydrologic framework of the Yucca Mountain region for the geochemical papers in this volume. The regional geologic units, which range in age from late Precambrian through Holocene, are briefly described. Yucca Mountain is composed of dominantly pyroclastic units that range in age from 11.4 to 15.2 Ma. The principal focus of study has been on the Paintbrush Group, which includes two major zoned and welded ash-flow tuffs separated by an important hydrogeologic unit referred to as the Paintbrush non-welded (PTn). The regional structural setting is currently one of extension, and the major local tectonic domains are presented together with a tectonic model that is consistent with the known structures at Yucca Mountain. Streamflow in this arid to semi-arid region occurs principally in intermittent or ephemeral channels. Near Yucca Mountain, the channels of Fortymile Wash and Amargosa River collect infrequent runoff from tributary basins, ultimately draining to Death Valley. Beneath the surface, large-scale interbasin flow of groundwater from one valley to another occurs commonly in the region. Regional groundwater flow beneath Yucca Mountain originates in the high mesas to the north and returns to the surface either in southern Amargosa Desert or in Death Valley, where it is consumed by evapotranspiration. The water table is very deep beneath the upland areas such as Yucca Mountain, where it is 500-750 m below the land surface, providing a large thickness of unsaturated rocks that are potentially suitable to host a nuclear-waste repository. The nature of unsaturated flow processes, which are important for assessing radionuclide migration, are inferred mainly from hydrochemical or isotopic evidence, from pneumatic tests of the fracture systems, and from the results of in situ experiments. Water seeping down through the unsaturated zone flows rapidly through fractures and more slowly through the pores of the rock matrix. Although capillary forces are expected to divert much of the flow around repository openings, some may drip onto waste packages, ultimately causing release of radionuclides, followed by transport down to the water table. ?? 2002 Elsevier Science Ltd. All rights reserved.

Applied Geochemistry↗

Firm size diversity, functional richness, and resilience

This paper applies recent advances in ecology to our understanding of firm development, sustainability, and economic development. The ecological literature indicates that the greater the functional richness of species in a system, the greater its resilience - that is, its ability to persist in the face of substantial changes in the environment. This paper focuses on the effects of functional richness across firm size on the ability of industries to survive in the face of economic change. Our results indicate that industries with a richness of industrial functions are more resilient to employment volatility. ?? 2006 Cambridge University Press.

Environment and Development Economics↗

Real-time nowcasting of microbiological water quality at recreational beaches: A wavelet and artificial neural network-based hybrid modeling approach

The number of beach closings caused by bacterial contamination has continued to rise in recent years, putting beachgoers at risk of exposure to contaminated water. Current approaches predict levels of indicator bacteria using regression models containing a number of explanatory variables. Data-based modeling approaches can supplement routine monitoring data and provide highly accurate short-term forecasts of beach water quality. In this paper, we apply the nonlinear autoregressive network with exogenous inputs (NARX) method with explanatory variables to predict Escherichia coli concentrations at four Lake Michigan beach sites. We also apply the nonlinear input–output network (NIO) and nonlinear autoregressive neural network (NAR) methods in addition to a hybrid wavelet-NAR (WA-NAR) model and demonstrate their application. All models were tested using 3 months of observed data. Results revealed that the NARX models provided the best performance and that the WA-NAR model, which requires no explanatory variables, outperformed the NIO and NAR models; therefore, the WA-NAR model is suitable for application to data scarce regions. The models proposed in this paper were evaluated using multiple performance metrics, including sensitivity and specificity measures, and produced results comparable or superior to those of previous mechanistic and statistical models developed for the same beach sites. The relatively high R 2 values between data and the NARX models ( R 2 values of ∼0.8 for the beach sites and ∼0.9 for the river site) indicate that the new class of models shows promise for beach management.

Environmental Science & Technology↗

Tapping environmental history to recreate America's colonial hydrology

Throughout American history water resources have played integral roles in shaping patterns of human settlement and networks of biological and economic exchange. In turn, humans have altered hydrologic systems to meet their needs. A paucity of climate and water discharge data for the seventeenth and eighteenth centuries, however, has left America's preindustrial hydrology largely unstudied. As a result, there have been few detailed, quantifiable, regional assessments of hydrologic change between the time of first European settlement and the dawn of industrial expansion. As scientists labor to understand present-day hydrologic systems and make predictions about the future, the value of expanding the geographic (1, 2) and temporal scopes (3, 4) of their studies has become increasingly evident. Pollen and tree-ring analyses have helped shed light on past climate and land-use patterns. But other nonscientific sources and methods can be equally revealing and in some cases complement empirical studies (5). This paper argues that environmental science, particularly that concerned with the human dimensions of water resources, stands to profit from using historical literature and archival sources. By considering work in environmental history, forging closer working relationships between the geophysical and social sciences, and seriously entertaining narratives as a form of evidence, environmental scientists can not only look farther into the past and across broader geographic areas, but they can also more accurately describe the nuances and complexities that define the ways humans have changed the world around them. In this paper, we present the recommendations of a multidisciplinary summer institute that developed 1) a conceptual and methodological framework for conducting historical hydrology, and 2) suggestions for ways that historical information can be used to inform the hydrologic sciences. Our intent here is to encourage further work along these or similar lines. We believe that future efforts that build on our famework and draw and expand upon the sources referenced below will produce scholarship of great utility to both environmental and social sciences.

Environmental Science & Technology↗

The need for simultaneous evaluation of ecosystem services and land use change

We are living in a period of massive global change. This rate of change may be almost without precedent in geologic history ( 1 ). Even the most remote areas of the planet are influenced by human activities. Modern landscapes have been highly modified to accommodate a growing human population that the United Nations has forecast to peak at 9.1 billion by 2050. Over this past century, reliance on services from ecosystems has increased significantly and, over past decades, sustainability of our modern, intensively managed ecosystems has been a topic of serious international concern ( 1 ). Numerous papers addressing a particular land-use change effect on specific ecosystem services have recently been published. For example, there is currently great interest in increasing biofuel production to achieve energy inde- pendence goals and recent papers have independently focused attention on impacts of land-use change on single ecosystem services such as carbon sequestration ( 2 ) and many others (e.g., water availability, biodiversity, pollination). However, land-use change clearly affects myriad ecosystem services simultaneously. Hence, a broader perspective and context is needed to evaluate and understand interrelated affects on multiple ecosystem services, especially as we strive for the goal of sustainably managing global ecosystems. Similarly, land uses affect ecosystem services synergistically; single land-use evaluations may be misleading because the overall impact on an ecosystem is not evaluated. A more holistic approach would provide a means and framework to characterize how land-use change affects provisioning of goods and services of complete ecosystems.

Environmental Science & Technology↗

Exploring factors controlling the variability of pesticide concentrations in the Willamette River Basin using tree-based models

We analyzed available concentration data of five commonly used herbicides and three pesticides collected from small streams in the Willamette River Basin in Oregon to identify factors that affect the variation of their concentrations in the area. The emphasis of this paper is the innovative use of classification and regression tree models for exploratory data analysis as well as analyzing data with a substantial amount of left-censored values. Among variables included in this analysis, land-use pattern in the watershed is the most important for all but one (simazine) of the eight pesticides studied, followed by geographic location, intensity of agriculture activities in the watershed (represented by nutrient concentrations in the stream), and the size of the watershed. The significant difference between urban sites and agriculture sites is the variability of stream concentrations. While all 16 nonurban watersheds have significantly higher variation than urban sites, the same is not necessarily true for the mean concentrations. Seasonal variation accounts for only a small fraction of the total variance in all eight pesticides.We analyzed available concentration data of five commonly used herbicides and three pesticides collected from small streams in the Willamette River Basin in Oregon to identify factors that affect the variation of their concentrations in the area. The emphasis of this paper is the innovative use of classification and regression tree models for exploratory data analysis as well as analyzing data with a substantial amount of left-censored values. Among variables included in this analysis, land-use pattern in the watershed is the most important for all but one (simazine) of the eight pesticides studied, followed by geographic location, intensity of agriculture activities in the watershed (represented by nutrient concentrations in the stream), and the size of the watershed. The significant difference between urban sites and agriculture sites is the variability of stream concentrations. While all 16 nonurban watersheds have significantly higher variation than urban sites, the same is not necessarily true for the mean concentrations. Seasonal variation accounts for only a small fraction of the total variance in all eight pesticides.

Environmental Science & Technology↗

Selenium stable isotope ratios as indicators of sources and cycling of selenium: Results from the northern reach of San Francisco Bay

Selenium stable isotope ratios can serve as indicators of Se sources and reduction of Se oxyanions, much as sulfur and nitrogen isotope ratios do in sulfur and nitrogen biogeochemical studies. A new analytical method, which allows precise Se isotope ratio measurements on 500 ng of Se, greatly enhances analysis of environmental samples. This paper presents the first environmental study to use Se stable isotopes. 80Se/76Se ratios, relative to a provisional standard, were measured in water, oil refinery wastewater, total sediment digest, and sediment extracts from the Carquinez area in the San Francisco Bay Estuary, Se isotope ratios in total sediment Se and in extracts designed to recover Se0 are slightly (about 2???) enriched in the lighter isotope relative to local bay water Se. This difference is smaller than the isotopic fractionations expected upon reduction of Se(VI) or Se(IV) to Se(0) and suggests that reduction of soluble selenium from the overlying waters is not the dominant process by which Se is incorporated into the sediments. Consistent isotopic differences between riverine and refinery inputs were not observed, and thus tracing of refinery inputs with Se isotopes is not possible in this system.Selenium stable isotope ratios can serve as indicators of Se sources and reduction of Se oxyanions, much as sulfur and nitrogen isotope ratios do in sulfur and nitrogen biogeochemical studies. A new analytical method, which allows precise Se isotope ratio measurements on 500 ng of Se, greatly enhances analysis of environmental samples. This paper presents the first environmental study to use Se stable isotopes. 80Se/76Se ratios, relative to a provisional standard, were measured in water, oil refinery wastewater, total sediment digests, and sediment extracts from the Carquinez area in the San Francisco Bay Estuary. Se isotope ratios in total sediment Se and in extracts designed to recover Se0 are slightly (about 2 per mil) enriched in the lighter isotope relative to local bay water Se. This difference is smaller than the isotopic fractionations expected upon reduction of Se(VI) or Se(IV) to Se(0) and suggests that reduction of soluble selenium from the overlying waters is not the dominant process by which Se is incorporated into the sediments. Consistent isotopic differences between riverine and refinery inputs were not observed, and thus tracing of refinery inputs with Se isotopes is not possible in this system.

Environmental Science & Technology↗

Determination of uptake kinetics (sampling rates) by lipid-containing semipermeable membrane devices (SPMDs) for polycyclic aromatic hydrocarbons (PAHs) in water

The use of lipid-containing semipermeable membrane devices (SPMDs) is becoming commonplace, but very little sampling rate data are available for the estimation of ambient contaminant concentrations from analyte levels in exposed SPMDs. We determined the aqueous sampling rates (R(s)s; expressed as effective volumes of water extracted daily) of the standard (commercially available design) 1-g triolein SPMD for 15 of the priority pollutant (PP) polycyclic aromatic hydrocarbons (PAHs) at multiple temperatures and concentrations. Under the experimental conditions of this study, recovery- corrected R(s) values for PP PAHs ranged from ???1.0 to 8.0 L/d. These values would be expected to be influenced by significant changes (relative to this study) in water temperature, degree of biofouling, and current velocity- turbulence. Included in this paper is a discussion of the effects of temperature and octanol-water partition coefficient (K(ow)); the impacts of biofouling and hydrodynamics are reported separately. Overall, SPMDs responded proportionally to aqueous PAH concentrations; i.e., SPMD R(s) values and SPMD-water concentration factors were independent of aqueous concentrations. Temperature effects (10, 18, and 26 ??C) on Rs values appeared to be complex but were relatively small.The use of lipid-containing semipermeable membrane devices (SPMDs) is becoming commonplace, but very little sampling rate data are available for the estimation of ambient contaminant concentrations from analyte levels in exposed SPMDs. We determined the aqueous sampling rates (Rss; expressed as effective volumes of water extracted daily) of the standard (commercially available design) 1-g triolein SPMD for 15 of the priority pollutant (PP) polycyclic aromatic hydrocarbons (PAHs) at multiple temperatures and concentrations. Under the experimental conditions of this study, recovery-corrected Rs values for PP PAHs ranged from ???1.0 to 8.0 L/d. These values would be expected to be influenced by significant changes (relative to this study) in water temperature, degree of biofouling, and current velocity-turbulence. Included in this paper is a discussion of the effects of temperature and octanol-water partition coefficient (KOW); the impacts of biofouling and hydrodynamics are reported separately. Overall, SPMDs responded proportionally to aqueous PAH concentrations; i.e., SPMD RS values and SPMD-water concentration factors were independent of aqueous concentrations. Temperature effects (10, 18, and 26??C) on RS values appeared to be complex but were relatively small.

Environmental Science & Technology↗

A study of the temporal variability of atrazine in private well water. Part I: Study design, implementation, and database development

In 1988, the Iowa Department of Natural Resources, along with the University of Iowa conducted the Statewide Rural Well Water Survey, commonly known as SWRL. A total of 686 private rural drinking water wells was selected by use of a probability sample and tested for pesticides and nitrates. Sixty-eight of these wells, the '10% repeat' wells, were additionally sampled in October, 1990 and June, 1991. Starting in November, 1991, the University of Iowa, with sponsorship from the United States Environmental Protection Agency, revisited these wells to begin a study of the temporal variability of atrazine and nitrates in wells. Other wells, which had originally tested positive for atrazine in SWRL but were not in the 10% repeat population, were added to the study population. Temporal sampling for a year-long period began in February of 1992 and concluded in January of 1993. All wells were sampled monthly, one subset was sampled weekly, and a second subset was sampled for 14-day consecutive periods. Two unique aspects of this study were the use of an immunoassay technique to screen for triazines before gas chromatography/mass spectrometry (GC/MS) analysis and quantification of atrazine, and the use of well owners to sample the wells. A total of 1771 samples from 83 wells are in the final data base for this study. This paper reviews the study design, the analytical methodologies, and development of the data base. A companion paper discusses the analysis of the data from this survey.

Environmental Monitoring and Assessment↗

A study of the temporal variability of atrazine in private well water. part ii: analysis of data

In 1988, the Iowa Department of Natural Resources, along withthe University of Iowa, conducted the Statewide Rural WellWater Survey, commonly known as SWRL. A total of 686private rural drinking water wells was selected by use of aprobability sample and tested for pesticides and nitrate. A subsetof these wells, the 10% repeat wells, were additionally sampledin October, 1990 and June, 1991. Starting in November, 1991,the University of Iowa, with sponsorship from the United StatesEnvironmental Protection Agency, revisited the 10% repeat wellsto begin a study of the temporal variability of atrazine and nitratein wells. Other wells, which had originally tested positive foratrazine in SWRL but were not in the 10% population, wereadded to the study population. Temporal sampling for a year-long period began in February of 1992 and concluded in Januaryof 1993. All wells were sampled monthly, a subset was sampledweekly, and a second subset was sampled for 14 day consecutiveperiods. Of the 67 wells in the 10% population tested monthly,7 (10.4%) tested positive for atrazine at least once during theyear, and 3 (4%) were positive each of the 12 months. Theaverage concentration in the 7 wells was 0.10 µg/L. Fornitrate, 15 (22%) wells in the 10% repeat population monthlysampling were above the Maximum Contaminant Level of 10 mg/L at least once. This paper, the second of two papers on thisstudy, describes the analysis of data from the survey. The firstpaper (Lorber et al., 1997) reviews the study design, theanalytical methodologies, and development of the data base.

Environmental Monitoring and Assessment↗

Modeling fish dynamics and effects of stress in a hydrologically pulsed ecosystem

Many wetlands undergo seasonal cycles in precipitation and water depth.This environmental seasonality is echoed in patterns of production of fishbiomass, which, in turn, influence the phenology of other components of thefood web, including wading birds. Human activities, such as drainage orother alterations of the hydrology, can exacerbate these natural cycles andresult in detrimental stresses on fish production and the higher trophic levels dependent on this production. In this paper we model theseasonal pattern of fish production in a freshwater marsh, with specialreference to the Everglades/Big Cypress region of southern Florida.The model illustrates the temporal pattern of production through theyear, which can result in very high densities of fish at the end of ahydroperiod (period of flooding), aswell as the importance of ponds and other deep depressions, both as refugia and sinks during dry periods. The model predicts that: (1) there is an effective threshold in the length of the hydroperiod that must beexceeded for high fish-population densities to be produced, (2) large,piscivorous fishes do not appear tohave a major impact on smaller fishes in the marsh habitat, and (3) therecovery of small-fish populations in the marsh following a major droughtmay require up to a year. The last of these results is relevant toassessing anthropogenic impacts on marsh production, as these effectsmay increase the severity and frequency of droughts.

Journal of Aquatic Ecosystem Stress and Recovery↗

Measurements of Reynolds stress profiles in unstratified tidal flow

In this paper we present a method for measuring profiles of turbulence quantities using a broadband acoustic doppler current profiler (ADCP). The method follows previous work on the continental shelf and extends the analysis to develop estimates of the errors associated with the estimation methods. ADCP data was collected in an unstratified channel and the results of the analysis are compared to theory. This comparison shows that the method provides an estimate of the Reynolds stresses, which is unbiased by Doppler noise, and an estimate of the turbulent kinetic energy (TKE) which is biased by an amount proportional to the Doppler noise. The noise in each of these quantities as well as the bias in the TKE match well with the theoretical values produced by the error analysis. The quantification of profiles of Reynolds stresses simultaneous with the measurement of mean velocity profiles allows for extensive analysis of the turbulence of the flow. In this paper, we examine the relation between the turbulence and the mean flow through the calculation of u * , the friction velocity, and C d the coefficient of drag. Finally, we calculate quantities of particular interest in turbulence modeling and analysis, the characteristic lengthscales, including a lengthscale which represents the stream-wise scale of the eddies which dominate the Reynolds stresses.

Journal of Geophysical Research C: Oceans↗

An analytical formulation of two‐dimensional groundwater dispersion induced by surficial recharge variability

A predominant cause of dispersion in groundwater is advective mixing due to variability in seepage rates. Hydraulic conductivity variations have been extensively researched as a cause of this seepage variability. In this paper the effect of variations in surface recharge to a shallow surficial aquifer is investigated as an important additional effect. An analytical formulation has been developed that relates aquifer parameters and the statistics of recharge variability to increases in the dispersivity. This is accomplished by solving Fourier transforms of the small perturbation forms of the groundwater flow equations. Two field studies are presented in this paper to determine the statistics of recharge variability for input to the analytical formulation. A time series of water levels at a continuous groundwater recorder is used to investigate the temporal statistics of hydraulic head caused by recharge, and a series of infiltrometer measurements are used to define the spatial variability in the recharge parameters. With these field statistics representing head fluctuations due to recharge, the analytical formulation can be used to compute the dispersivity without an explicit representation of the recharge boundary. Results from a series of numerical experiments are used to define the limits of this analytical formulation and to provide some comparison. A sophisticated model has been developed using a particle‐tracking algorithm (modified to account for temporal variations) to estimate groundwater dispersion. Dispersivity increases of 9 percent are indicated by the analytical formulation for the aquifer at the field site. A comparison with numerical model results indicates that the analytical results are reasonable for shallow surficial aquifers in which two‐dimensional flow can be assumed.

Water Resources Research↗

Estimating contaminant loads in rivers: An application of adjusted maximum likelihood to type 1 censored data

This paper presents an adjusted maximum likelihood estimator (AMLE) that can be used to estimate fluvial transport of contaminants, like phosphorus, that are subject to censoring because of analytical detection limits. The AMLE is a generalization of the widely accepted minimum variance unbiased estimator (MVUE), and Monte Carlo experiments confirm that it shares essentially all of the MVUE's desirable properties, including high efficiency and negligible bias. In particular, the AMLE exhibits substantially less bias than alternative censored‐data estimators such as the MLE (Tobit) or the MLE followed by a jackknife. As with the MLE and the MVUE the AMLE comes close to achieving the theoretical Frechet‐Cramér‐Rao bounds on its variance. This paper also presents a statistical framework, applicable to both censored and complete data, for understanding and estimating the components of uncertainty associated with load estimates. This can serve to lower the cost and improve the efficiency of both traditional and real‐time water quality monitoring.

Water Resources Research↗

Overview of the Microscopic Imager Investigation during Spirit's first 450 sols in Gusev crater

The Microscopic Imager (MI) on the Mars Exploration Rover Spirit has returned images of Mars with higher resolution than any previous camera system, allowing detailed petrographic and sedimentological studies of the rocks and soils at the Gusev landing site. Designed to simulate a geologist's hand lens, the MI is mounted on Spirit's instrument arm and can resolve objects 0.1 mm in size or larger. This paper provides an overview of MI operations, data calibration, processing, and analysis of MI data returned during the first 450 sols (Mars days) of the Spirit landed mission. The primary goal of this paper is to facilitate further analyses of MI data by summarizing the methods used to acquire and process the data, the radiometric and geometric accuracy of MI data products, and the availability of archival products. In addition, scientific results of the MI investigation are summarized. MI observations show that poorly sorted soils are common in Gusev crater, although aeolian bedforms have well‐sorted coarse sand grains on their surfaces. Abraded surfaces of plains rocks show igneous textures, light‐toned veins or fracture‐filling minerals, and discrete coatings. The rocks in the Columbia Hills have a wide variety of granular textures, consistent with volcaniclastic or impact origins. Case hardening and submillimeter veins observed in the rocks as well as soil crusts and cemented clods imply episodic subsurface aqueous fluid movement, which has altered multiple geologic units in the Columbia Hills. The MI also monitored Spirit's solar panels and the magnets on the rover's deck.

Journal of Geophysical Research E: Planets↗

Form drag in rivers due to small-scale natural topographic features: 2. Irregular sequences

The size, shape, and spacing of small-scale topographic features found on the boundaries of natural streams, rivers, and floodplains can be quite variable. Consequently, a procedure for determining the form drag on irregular sequences of different-sized topographic features is essential for calculating near-boundary flows and sediment transport. A method for carrying out such calculations is developed in this paper. This method builds on the work of Kean and Smith (2006), which describes the flow field for the simpler case of a regular sequence of identical topographic features. Both approaches model topographic features as two-dimensional elements with Gaussian-shaped cross sections defined in terms of three parameters. Field measurements of bank topography are used to show that (1) the magnitude of these shape parameters can vary greatly between adjacent topographic features and (2) the variability of these shape parameters follows a lognormal distribution. Simulations using an irregular set of topographic roughness elements show that the drag on an individual element is primarily controlled by the size and shape of the feature immediately upstream and that the spatial average of the boundary shear stress over a large set of randomly ordered elements is relatively insensitive to the sequence of the elements. In addition, a method to transform the topography of irregular surfaces into an equivalently rough surface of regularly spaced, identical topographic elements also is given. The methods described in this paper can be used to improve predictions of flow resistance in rivers as well as quantify bank roughness.

Journal of Geophysical Research F: Earth Surface↗

Reflectance spectroscopy of organic compounds: 1. Alkanes

Reflectance spectra of the organic compounds comprising the alkane series are presented from the ultraviolet to midinfrared, 0.35 to 15.5 /??m. Alkanes are hydrocarbon molecules containing only single carbon-carbon bonds, and are found naturally on the Earth and in the atmospheres of the giant planets and Saturn's moon, Titan. This paper presents the spectral properties of the alkanes as the first in a series of papers to build a spectral database of organic compounds for use in remote sensing studies. Applications range from mapping the environment on the Earth, to the search for organic molecules and life in the solar system and throughout the. universe. We show that the spectral reflectance properties of organic compounds are rich, with major diagnostic spectral features throughout the spectral range studied. Little to no spectral change was observed as a function of temperature and only small shifts and changes in the width of absorption bands were observed between liquids and solids, making remote detection of spectral properties throughout the solar system simpler. Some high molecular weight organic compounds contain single-bonded carbon chains and have spectra similar to alkanes even ' when they fall into other families. Small spectral differences are often present allowing discrimination among some compounds, further illustrating the need to catalog spectral properties for accurate remote sensing identification with spectroscopy.

Journal of Geophysical Research E: Planets↗