SEARCH · USGS Science

Results for “One Earth”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 793 records · Page 44Linked to original sources

USGS1997

Depth dependence of earthquake frequency-magnitude distributions in California: Implications for rupture initiation

Statistics of earthquakes in California show linear frequency-magnitude relationships in the range of M 2.0 to M 5.5 for various data sets. Assuming Gutenberg-Richter distributions, there is a systematic decrease in b value with increasing depth of earthquakes. We find consistent results for various data sets from northern and southern California that both include and exclude the larger aftershock sequences. We suggest that at shallow depth (∼0 to 6 km) conditions with more heterogeneous material properties and lower lithospheric stress prevail. Rupture initiations are more likely to stop before growing into large earthquakes, producing relatively more smaller earthquakes and consequently higher b values. These ideas help to explain the depth-dependent observations of foreshocks in the western United States. The higher occurrence rate of foreshocks preceding shallow earthquakes can be interpreted in terms of rupture initiations that are stopped before growing into the mainshock. At greater depth (9–15 km), any rupture initiation is more likely to continue growing into a larger event, so there are fewer foreshocks. If one assumes that frequency-magnitude statistics can be used to estimate probabilities of a small rupture initiation growing into a larger earthquake, then a small ( M 2) rupture initiation at 9 to 12 km depth is 18 times more likely to grow into a M 5.5 or larger event, compared to the same small rupture initiation at 0 to 3 km.

Journal of Geophysical Research B: Solid Earth↗

USGS1950

Populations and home range relationships of the box turtle, Terrapene c. carolina (Linnaeus)

SUMMARY: A population study of the box turtle (Terrapene c. carolina Linnaeus) was made during the years 1944 to 1947 at the Patuxent Research Refuge, Maryland. A thirty acre area in well drained bottomland forest on the flood plain of the Patuxent River was selected for intensive study. Similarly forested land extended in all directions from the study plot. Markers were established at eighty-three foot intervals over the study plot for reference in recording locality data. Individuals were marked by filing notches in the marginal scutes according to a code system. There were 2109 collections of study area turtles. Records of collecting sites and turtle behavior showed that in the bottomlands habitat cover is utilized extensively during the day as well as at night. Turtles not actively moving about are almost always found in or around brush piles, heaps of debris, and tangles of vines and briars. Gully banks and woods openings are used for sunning. Turtles are occasionally found in the mud or water of the gullies. The commonest type of night retreat is a cavity constructed by the turtle in leaves, debris, or earth. These cavities, termed 'forms,' may be used only once, but are sometimes used repeatedly, often at intervals of several days or more. Different turtles sometimes use the same form on successive nights. Weather conditions most favorable to turtle activity are high humidity, warm sunny days, and frequent rains. The most unfavorable influences are low temperatures and drought. On most summer days there are some active turtles but individual turtles are not active every day. Periods of activity are alternated with periods of quiet even in favorable weather. This behavior is most pronounced in early spring and late fall when inactive days are often more numerous than active ones. Adult turtles occupy specific home ranges which they maintain from year to year. The turtles living in the study plot retained their ranges even through a flood that completely covered the area. Maximum home range diameters were determined by measurements of the mapped ranges of individual turtles. The average range of adult males was 330 feet, adult females 370 feet. The difference between male and female ranges was not statistically significant. There was no evidence of defense of territory. Ranges of turtles of all ages and both sexes overlapped grossly. Turtles were frequently found near each other and no antagonistic behavior was observed. A trail-laying device was developed in order to follow individual travel routes. The trailer consists of a light weight housing fastened to the turtle's back. It contains a spool of white thread that unwinds as the turtle moves, thus marking its exact route. Turtles selected for this more detailed study were followed with trailers for a total of 456 turtle days. Maps illustrating their travels are shown. Normal movements within the home range are characterized by, (1) turns, doublings, detours, and criss-crossing paths completely covering the area, (2) interspersion of fairly direct traverses of the home range, (3) frequently repeated travels over certain paths or routes. Trailer records and mapped collection records both show that the maximum limits of the home range are ordinarily reached within a few days or weeks. This general procedure is varied by some turtles to include intensive coverage of only one portion of the range at a time. Some turtles have two home ranges and travel between them at infrequent intervals. One turtle showing this behavior was followed with a trailer for 161 days during 1946 and 1947. Trips outside the home range are made by some turtles. These include egg laying trips by females as well as trips of unexplained nature made by both males and females. Turtles from other areas occasionally occur as transients in the study plot. The size of the population was estimated on the basis of collections during on

Ecological Monographs↗

USGS1972

Site distribution of iron in staurolite

The Mössbauer spectrum of staurolite does not necessarily indicate that ferrous iron is distributed over both the tetrahedral Fe site and one or more of the octahedral sites, as previously thought. Two doublets are present in the spectrum, but their quadrupole spliting and isomer shift are more consistent with both being due to tetrahedrally coordinated ferrous iron. Smith's X-ray work has shown that cations in the Fe site actually assume several slightly different positions, and iron in each of these positions may give rise to a different Mössbauer doublet.

Earth and Planetary Science Letters↗

USGS2011

Simulations of historical and future trends in snowfall and groundwater recharge for basins draining to Long Island Sound

A regional watershed model was developed for watersheds contributing to Long Island Sound, including the Connecticut River basin. The study region covers approximately 40 900 km 2 , extending from a moderate coastal climate zone in the south to a mountainous northern New England climate zone dominated by snowmelt in the north. The input data indicate that precipitation and temperature have been increasing for the last 46 years (1961– 2006) across the region. Minimum temperature has increased more than maximum temperature over the same period (1961–2006). The model simulation indicates that there was an upward trend in groundwater recharge across most of the modeled region. However, trends in increasing precipitation and groundwater recharge are not significant at the 0.05 level if the drought of 1961–67 is removed from the time series. The trend in simulated snowfall is not significant across much of the region, although there is a significant downward trend in southeast Connecticut and in central Massachusetts. To simulate future trends, two input datasets, one assuming high carbon emissions and one assuming low carbon emissions, were developed from GCM forecasts. Under both of the carbon emission scenarios, simulations indicate that historical trends will continue, with increases in groundwater recharge over much of the region and substantial snowfall decreases across Massachusetts, Connecticut, southern Vermont, and southern New Hampshire. The increases in groundwater recharge and decreases in snowfall are most pronounced for the high emission scenario.

Connecticut, Massachusetts, New Hampshire, Rhode I↗

USGS1973

Lead concentration and isotopic composition in five peridotite inclusions of probable mantle origin

The lead content of five whole-rock peridotite inclusions (four lherzolites and one harzburgite) in alkali basalt ranges from 82 to 570 ppb (parts per billion). Approximately 30–60 ppb of this amount can be accounted for by analyzed major silicate minerals (olivine ≤ 10 ppb; enstatite 5–28 ppb; chrome diopside ∼400 ppb). Through a series of acid leaching experiments, the remainder of the lead is shown to be quite labile and to reside in either glassy or microcrystalline veinlets or accessory mineral phases, such as apatite and mica. The lead isotopic composition of the peridotites ( 206 Pb/ 204 Pb= 18.01–18.90; 207 Pb/ 204 Pb= 15.52–15.61; 208 Pb/ 204 Pb= 37.80–38.86) lies within the range of values defined by many modern volcanic rocks and, in particular, is essentially coextensive with the abyssal tholeiite field. In all but one instance, isotopic differences were found between the peridotite and its host alkali basalt. Two of the peridotites clearly demonstrated internal isotopic heterogeneity between leachable and residual fractions that could not simply be due to contamination by the host basalt. However, there is no evidence that these ultramafic rocks form some layer in the mantle with isotopic characteristics fundamentally different from those of the magma sources of volcanic rocks.

Earth and Planetary Science Letters↗

USGS2011

Partially melted granodiorite and related rocks ejected from Crater Lake caldera, Oregon

Blocks of medium-grained granodiorite to 4 m, and minor diabase, quartz diorite, granite, aplite and granophyre, are common in ejecta of the ∼6,900 yrBP calderaforming eruption of Mount Mazama. The blocks show degrees of melting from 0–50 vol%. Because very few have adhering juvenile magma, it is thought that the blocks are fragments of the Holocene magma chamber's walls. Primary crystallisation of granodiorite produced phenocrystic pl + hyp + aug + mt + il + ap + zc, followed by qz + hb + bt + alkali feldspar (af). Presence of fluid inclusions in all samples implies complete crystallisation before melting. Subsolidus exchange with meteoric hydrothermal fluids before melting is evident in δ 18 O values of −3·4+4·9‰ for quartz and plagioclase in partially melted granodiorites (fresh lavas from the region have δ 18 O values of +5·8−+7·0‰); δ 18 O values of unmelted granodiorites from preclimatic eruptive units suggest hydrothermal exchange began between ∼70 and 24 ka. Before eruption, the granitic rocks equilibrated at temperatures, estimated from Fe-Ti oxide compositions, of up to ∼1000°C for c. 10 2 –10 4 years at a minimum pressure of 100-180 MPa. Heating caused progressive breakdown or dissolution of hb, af, bt, and qz, so that samples with the highest melt fractions have residual pl + qz and new or re-equilibrated af + hyp + aug + mt + il in high-silica rhyolitic glass (75-77% SiO 2 ). Mineral compositions vary systematically with increasing temperature. Hornblende is absent in rocks with Fe-Ti oxide temperatures >870°C, and bt above 970°C. Oxygen isotope fractionation between qz, pl, and glass in partially fused granodiorite also is consistent with equilibration at T≥900°C (Δ 18 O qz.pl = +0·7 ± 0·5‰). Element partitioning between glass and crystals reflects the large fraction of refractory pl, re-equilibration of af and isolation or incomplete dissolution of accessory phases. Ba and REE contents of analysed glass separates can be successfully modelled by observed degrees of partial melting of granodiorite, but Rb, Sr and Sc concentrations cannot. Several samples have veins of microlite-free glass 1–5 mm thick that are compositionally and physically continuous with intergranular melt and which apparently formed after the climactic eruption began. Whole-rock H 2 O content, microprobe glass analysis sums near 100% and evidence for high temperature suggest liquids in the hotter samples were nearly anhydrous. The occurrence of similar granodiorite blocks at all azimuths around the 8 × 10 km caldera implies derivation from one pluton. Compositional similarity between granodiorite and pre-Mazama rhyodacites suggests that the pluton may have crystallised as recently as 0·4 Ma; compositional data preclude crystallisation from the Holocene chamber. The history of crystallisation, hydrothermal alteration, and remelting of the granitic rocks may be characteristic of shallow igneous systems in which the balance between hydrothermal cooling and magmatic input changes repeatedly over intervals of 10 4 -10 6 years.

Oregon↗

USGS2017

Geologic map of the northeast flank of Mauna Loa volcano, Island of Hawai'i, Hawaii

Summary Mauna Loa, the largest volcano on Earth, has erupted 33 times since written descriptions became available in 1832. Some eruptions were preceded by only brief seismic unrest, while others followed several months to a year of increased seismicity. The majority of the eruptions of Mauna Loa began in the summit area (>12,000-ft elevation; Lockwood and Lipman, 1987); yet the Northeast Rift Zone (NERZ) was the source of eight flank eruptions since 1843 (table 1). This zone extends from the 13,680-ft-high summit towards Hilo (population ~60,000), the second largest city in the State of Hawaii. Although most of the source vents are farther than 30 km away, the 1880 flow from one of the vents extends into Hilo, nearly reaching Hilo Bay. The city is built entirely on flows erupted from the NERZ, most older than that erupted in 1843. Once underway, Mauna Loa's eruptions can produce lava flows that reach the sea in less than 24 hours, severing roads and utilities in their path. For example, lava flows erupted from the Southwest Rift Zone (SWRZ) in 1950 advanced at an average rate of 9.3 km per hour, and all three lobes reached the ocean within approximately 24 hours (Finch and Macdonald, 1953). The flows near the eruptive vents must have traveled even faster. In terms of eruption frequency, pre-eruption warning, and rapid flow emplacement, Mauna Loa poses an enormous volcanic-hazard threat to the Island of Hawai‘i. By documenting past activity and by alerting the public and local government officials of our findings, we can anticipate the volcanic hazards and substantially mitigate the risks associated with an eruption of this massive edifice. From the geologic record, we can deduce several generalized facts about the geologic history of the NERZ. The middle to the uppermost section of the rift zone were more active in the past 4,000 years than the lower part, perhaps due to buttressing of the lower east rift zone by Mauna Kea and Kīlauea volcanoes. The historical flows that erupted on the north flank of the rift zone, which is more vulnerable to inundation, advanced toward Hilo. Lockwood (1990) noted that the vents of historical activity are migrating to the south. The volcano appears to have a self-regulating mechanism that evenly distributes long-term activity across its flanks. The geologic record also supports this notion; the time prior to the historical period (Age Group 1, orange units, pre-A.D. 1843–1,000 yr B.P.; see map sheet 2) is dominated by activity on the south side of the NERZ. The NERZ trends N. 65° E. and is about 40 km long and 2–4 km wide, narrowing at the summit caldera. It becomes diffuse (6–7 km wide) at its down-rift terminus, at the approximately 3,400-ft elevation. Its constructional crest is marked by low spatter ramparts and by spatter cones as high as 60 m. Subparallel eruptive fissures and ground cracks cut vent deposits and flows in and near the rift crest. Lava typically flows to the north, east, or south, depending on vent location relative to the rift crest. Encompassing 1,140 km 2 of the northeast flank of Mauna Loa from the 10,880-ft elevation to sea level, the map covers the area from Hilo to Volcano on the east and includes the rift zone from Puu Ulaula quadrangle in the southwest to Hilo in the northeast. The distribution of 105 eruptive units (flows)—separated into 15 age groups ranging from more than 30,000 years B.P. to A.D. 1984—are shown, as well as the relations of volcanic and surficial sedimentary deposits. This map incorporates previously reported work published in generalized small-scale maps (Lockwood and Lipman, 1987; Buchanan-Banks, 1993; Lockwood, 1995; and Wolfe and Morris, 1996).

Hawaii↗

USGS2017

Challenges in recovering resources from acid mine drainage

Metal recovery from mine waters and effluents is not a new approach but one that has occurred largely opportunistically over the last four millennia. Due to the need for low-cost resources and increasingly stringent environmental conditions, mine waters are being considered in a fresh light with a designed, deliberate approach to resource recovery often as part of a larger water treatment evaluation. Mine water chemistry is highly dependent on many factors including geology, ore deposit composition and mineralogy, mining methods, climate, site hydrology, and others. Mine waters are typically Ca-Mg-SO4±Al±Fe with a broad range in pH and metal content. The main issue in recovering components of these waters having potential economic value, such as base metals or rare earth elements, is the separation of these from more reactive metals such as Fe and Al. Broad categories of methods for separating and extracting substances from acidic mine drainage are chemical and biological. Chemical methods include solution, physicochemical, and electrochemical technologies. Advances in membrane techniques such as reverse osmosis have been substantial and the technique is both physical and chemical. Biological methods may be further divided into microbiological and macrobiological, but only the former is considered here as a recovery method, as the latter is typically used as a passive form of water treatment.

Conference Paper↗

USGS2014

Three-dimensional seismic velocity structure of Mauna Loa and Kilauea volcanoes in Hawaii from local seismic tomography

We present a new three-dimensional seismic velocity model of the crustal and upper mantle structure for Mauna Loa and Kilauea volcanoes in Hawaii. Our model is derived from the first-arrival times of the compressional and shear waves from about 53,000 events on and near the Island of Hawaii between 1992 and 2009 recorded by the Hawaiian Volcano Observatory stations. The V p model generally agrees with previous studies, showing high-velocity anomalies near the calderas and rift zones and low-velocity anomalies in the fault systems. The most significant difference from previous models is in V p / V s structure. The high- V p and high- V p / V s anomalies below Mauna Loa caldera are interpreted as mafic magmatic cumulates. The observed low- V p and high- V p / V s bodies in the Kaoiki seismic zone between 5 and 15 km depth are attributed to the underlying volcaniclastic sediments. The high- V p and moderate- to low- V p / V s anomalies beneath Kilauea caldera can be explained by a combination of different mafic compositions, likely to be olivine-rich gabbro and dunite. The systematically low- V p and low- V p / V s bodies in the southeast flank of Kilauea may be caused by the presence of volatiles. Another difference between this study and previous ones is the improved V p model resolution in deeper layers, owing to the inclusion of events with large epicentral distances. The new velocity model is used to relocate the seismicity of Mauna Loa and Kilauea for improved absolute locations and ultimately to develop a high-precision earthquake catalog using waveform cross-correlation data.

Hawaii↗

USGS2016

Lithospheric flexure under the Hawaiian volcanic load: Internal stresses and a broken plate revealed by earthquakes

Several lines of earthquake evidence indicate that the lithospheric plate is broken under the load of the island of Hawai`i, where the geometry of the lithosphere is circular with a central depression. The plate bends concave downward surrounding a stress-free hole, rather than bending concave upward as with past assumptions. Earthquake focal mechanisms show that the center of load stress and the weak hole is between the summits of Mauna Loa and Mauna Kea where the load is greatest. The earthquake gap at 21 km depth coincides with the predicted neutral plane of flexure where horizontal stress changes sign. Focal mechanism P axes below the neutral plane display a striking radial pattern pointing to the stress center. Earthquakes above the neutral plane in the north part of the island have opposite stress patterns; T axes tend to be radial. The M 6.2 Honomu and M 6.7 Kiholo main shocks (both at 39 km depth) are below the neutral plane and show radial compression, and the M 6.0 Kiholo aftershock above the neutral plane has tangential compression. Earthquakes deeper than 20 km define a donut of seismicity around the stress center where flexural bending is a maximum. The hole is interpreted as the soft center where the lithospheric plate is broken. Kilauea's deep conduit is seismically active because it is in the ring of maximum bending. A simplified two-dimensional stress model for a bending slab with a load at one end yields stress orientations that agree with earthquake stress axes and radial P axes below the neutral plane. A previous inversion of deep Hawaiian focal mechanisms found a circular solution around the stress center that agrees with the model. For horizontal faults, the shear stress within the bending slab matches the slip in the deep Kilauea seismic zone and enhances outward slip of active flanks.

Hawaii↗

USGS2021

ECCOE Landsat quarterly Calibration and Validation report — Quarter 2, 2021

Executive Summary The U.S. Geological Survey (USGS) Earth Resources Observation and Science (EROS) Calibration and Validation (Cal/Val) Center of Excellence (ECCOE) focuses on improving the accuracy, precision, calibration, and product quality of remote-sensing data, leveraging years of multiscale optical system geometric and radiometric calibration and characterization experience. The ECCOE Landsat Cal/Val Team continually monitors the geometric and radiometric performance of active Landsat missions and makes calibration adjustments, as needed, to maintain data quality at the highest level. This report provides observed geometric and radiometric analysis results for Landsats 7–8 for quarter 2 (April–June), 2021. All data used to compile the Cal/Val analysis results presented in this report are freely available from the USGS EarthExplorer website: https://earthexplorer.usgs.gov . One specific activity that the Cal/Val Team continued to closely monitor this quarter was the Landsat 8 Thermal Infrared Sensor (TIRS) response degradation, which has been observed since the two November 2020 safehold events. Detailed analysis results characterizing this degradation have been included in this report. Additional information about the safehold events is here: https://www.usgs.gov/core-science-systems/nli/landsat/november-19-2020-landsat-8-data-availability-update-recent-safehold .

Open-File Report↗

USGS2022

ECCOE Landsat quarterly Calibration and Validation report—Quarter 3, 2021

Executive Summary The U.S. Geological Survey (USGS) Earth Resources Observation and Science (EROS) Calibration and Validation (Cal/Val) Center of Excellence (ECCOE) focuses on improving the accuracy, precision, calibration, and product quality of remote-sensing data, leveraging years of multiscale optical system geometric and radiometric calibration and characterization experience. The ECCOE Landsat Cal/Val Team continually monitors the geometric and radiometric performance of active Landsat missions and makes calibration adjustments, as needed, to maintain data quality at the highest level. This report provides observed geometric and radiometric analysis results for Landsats 7–8 for quarter 3 (July–September), 2021. All data used to compile the Cal/Val analysis results presented in this report are freely available from the USGS EarthExplorer website: https://earthexplorer.usgs.gov . One specific activity that the Cal/Val Team continued to closely monitor this quarter was the Landsat 8 Thermal Infrared Sensor (TIRS) response degradation, which has been observed since the two November 2020 safehold events. Detailed analysis results characterizing this degradation have been included in this report. Additional information about the safehold events is here: https://www.usgs.gov/core-science-systems/nli/landsat/november-19-2020-landsat-8-data-availability-update-recent-safehold .

Open-File Report↗

USGS2022

ECCOE Landsat Quarterly Calibration and Validation report— Quarter 4, 2021

Executive Summary The U.S. Geological Survey (USGS) Earth Resources Observation and Science (EROS) Calibration and Validation (Cal/Val) Center of Excellence (ECCOE) focuses on improving the accuracy, precision, calibration, and product quality of remote-sensing data, leveraging years of multiscale optical system geometric and radiometric calibration and characterization experience. The ECCOE Landsat Cal/Val Team continually monitors the geometric and radiometric performance of active Landsat missions and makes calibration adjustments, as needed, to maintain data quality at the highest level. This report provides observed geometric and radiometric analysis results for Landsats 7–8 for quarter 4 (October–December), 2021. All data used to compile the Cal/Val analysis results presented in this report are freely available from the USGS EarthExplorer website: https://earthexplorer.usgs.gov . One specific activity that the Cal/Val Team continued to closely monitor this quarter was the Landsat 8 Thermal Infrared Sensor (TIRS) response degradation, which has been observed since the two November 2020 safehold events. Detailed analysis results characterizing this degradation have been included in this report. Additional information about the safehold events is here: https://www.usgs.gov/core-science-systems/nli/landsat/november-19-2020-landsat-8-data-availability-update-recent-safehold .

Open-File Report↗

USGS2022

ECCOE Landsat Quarterly Calibration and Validation report—Quarter 1, 2022

Executive Summary The U.S. Geological Survey (USGS) Earth Resources Observation and Science (EROS) Calibration and Validation (Cal/Val) Center of Excellence (ECCOE) focuses on improving the accuracy, precision, calibration, and product quality of remote-sensing data, leveraging years of multiscale optical system geometric and radiometric calibration and characterization experience. The ECCOE Landsat Cal/Val Team continually monitors the geometric and radiometric performance of active Landsat missions and makes calibration adjustments, as needed, to maintain data quality at the highest level. This report provides observed geometric and radiometric analysis results for Landsats 7–8 for quarter 1 (January–March), 2022. All data used to compile the Cal/Val analysis results presented in this report are freely available from the USGS EarthExplorer website: https://earthexplorer.usgs.gov . One specific activity that the Cal/Val Team continued to closely monitor this quarter was the Landsat 8 Thermal Infrared Sensor (TIRS) response degradation, which has been observed since the two November 2020 safehold events. Detailed analysis results characterizing this degradation have been included in this report. Additional information about the safehold events is here: https://www.usgs.gov/core-science-systems/nli/landsat/november-19-2020-landsat-8-data-availability-update-recent-safehold .

Open-File Report↗

USGS2014

Digital data in support of studies and assessments of coal and petroleum resources in the Appalachian basin

The Appalachian basin is a mature basin containing abundant oil, gas, and coal resources. Its fossil-fuel-bearing strata range in age from Cambrian to Permian and extend over the States of New York, Pennsylvania, Maryland, Ohio, West Virginia, Virginia, Kentucky, Tennessee, Georgia, and Alabama. The basin has provided abundant fossil fuels to support the Nation’s economic growth for at least 150 years and U.S. Geological Survey (USGS) assessments suggest that substantial untapped resources remain. A merger of new and old geologic data and ideas is required to locate and extract those remaining resources. This chapter brings together abundant existing datasets in a common and integrated spatial format to advance our understanding of the distribution, geologic framework, burial history, and geochemical character of the basin’s oil, gas, and coal resources. These datasets support the information and findings in chapters B through G of this volume, which include (1) geologic cross sections, seismic profiles, and burial history models that document the depositional and structural framework of the basin; (2) assessments of Carboniferous coal-bed gas and Devonian shale gas; (3) studies about the distribution of oil, gas, and coal fields and the geochemistry of natural gas and oil; and (4) a history of fossil-fuel production in the basin. The data that supported these studies were refined and made more accessible using geographic information system (GIS) tools. The following types of data are included: (1) the bedrock geology of States included within the boundary of the Appalachian basin, (2) the locations of oil and gas wells and fields, (3) data produced for the National Oil and Gas Assessment, and (4) the stratigraphy, geochemistry, and production of coal. Data layers are available in shapefile and Zipped Keyhole Markup Language (KMZ) formats, which can be viewed using ArcGIS, Google Earth, or any software package that supports these data formats. Metadata for these datasets are available in HTML and XML formats. Metadata files contain information about the sources of data used to create the dataset, the creation process steps, the data quality, the geographic coordinate system and horizontal datum used for the dataset, the values of attributes used in the dataset table, information about the publication and the publishing organization, and other information that may be useful to the reader. All links in the metadata were valid at the time of compilation. Some of these links may no longer be valid. No attempt has been made to determine the new online location (if one exists) for the data.

Appalachian basin↗

USGS2022

ECCOE Landsat Quarterly Calibration and Validation report—Quarter 2, 2022

Executive Summary The U.S. Geological Survey Earth Resources Observation and Science Calibration and Validation (Cal/Val) Center of Excellence (ECCOE) focuses on improving the accuracy, precision, calibration, and product quality of remote-sensing data, leveraging years of multiscale optical system geometric and radiometric calibration and characterization experience. The ECCOE Landsat Cal/Val Team continually monitors the geometric and radiometric performance of active Landsat missions and makes calibration adjustments, as needed, to maintain data quality at the highest level. This report provides observed geometric and radiometric analysis results for Landsats 7–8 for quarter 2 (April–June), 2022. All data used to compile the Cal/Val analysis results presented in this report are freely available from the U.S. Geological Survey EarthExplorer website: https://earthexplorer.usgs.gov . One specific activity that the ECCOE Landsat Cal/Val Team closely monitored was the lowering of the Landsat 7 orbit. On April 6, 2022, the Landsat 7 Enhanced Thematic Mapper Plus (ETM+) sensor was placed into standby mode, and a series of spacecraft burns was completed throughout the month of April to lower the satellite’s orbit by 8 kilometers. Imaging resumed at the lower orbit of 697 kilometers on May 5, 2022, extending the science mission to allow for essential data to be acquired during the 2022 Northern Hemisphere fire and growing season. Additional information about the Landsat 7 orbit lowering is here: https://www.usgs.gov/centers/eros/news/landsat-7-lowered-standard-landsat-orbit#:~:text=The%20satellite's%20primary%20science%20mission%20has%20ended&text=On%20April%206%2C%202022%2C%20the,satellite's%20orbit%20by%208%20kilometers .

Open-File Report↗

USGS1978

Tin and related elements in sediments and beach sands from Afghanistan, Iran, and Turkey

Sixty samples of sediments from stream beds, outwash plains, and beaches were collected in Afghanistan, Iran, and Turkey by Fred L. Klinger, U.S. Bureau of Mines, as part of the field work undertaken by the National Geographic-Smithsonian Pyrotechnological Expedition of 1968. Facilities for the analysis of the samples for tin and other metals were not immediately available, but in 1973 arrangements were made for analyses to be made on a time-permitting basis in the U.S. Geological Survey. The original purpose in collecting the samples was to determine whether tin was present in amounts indicative of sources for tin ores used in antiquity for the manufacture of bronze. The results of the analyses not only permitted an evaluation of the potential for tin in the localities sampled, but also afforded chemical and mineralogical data that were interpretable in the context of regional potential for other elements of current industrial use. These include gold, base metals, ferro-alloy metals, beryllium, rare earths, and barium. The original 60 samples of sand were sieved to make three size fraction (>0.707 mm, <O.707->O.177 mm, and <0.177 mm) for spectrographic and chemical analysis. Splits of these fractions were used for replicate analyses to permit evaluation of the precision of the analytical procedures. Further splitting of the <0.707->0.177 mm sand gave fractions from each sample that were separated in bromoform. Concentrates from the heavy-liquid separations were divided magnetically into six parts from most magnetic to least magnetic. These concentrates were analyzed spectrographically. The precision of the spectrographic analyses is well within the limits of precision expected from semiquantitative procedures. Such precision allows semiquantitative spectrographic procedures to be used with confidence as a valuable tool for reconnaissance investigations in which multi-element analyses are necessary. The analyses of the various fractions of sediments and sediment concentrates indicate the sample media in which an element was most likely to occur. Tin exhibited no preferential concentration into any particular medium. However, many elements with which tin is associated, and other elements of industrial use, do concentrate into one or more of the sample media. This indication of a preferred medium permits interpretation of the analyses as to the best sample medium for a particular element in the environment of western Asia. Cassiterite and/or tin were detected in many samples from Afghanistan, Iran, and Turkey, but in most of the samples the tin was present in normal crustal abundance. Sixteen samples, including seven from Afghanistan, eight from Iran, and one from Turkey contain unusually large amounts of tin. The most notable areas of anomalous tin are near Mirzaka, Qala-i-Asad, and Shah Agha in Afghanistan; near Meshed, Shir Kuh, Natanz, Nodus, and Talmesi in Iran; and on the shore of the Balck Sea just west of Trabzon in Turkey. Even in these localities the tin appears to be a minor element associated with other ores. The most common association of tin is with copper at known mineralized areas. This relation may have historical significance in the context of the development of bronze. The results of the analyses provided geochemical data on the distribution of other elements of industrial use and clearly identified nine of the ten known mineral deposits represented by the samples. The known metallization at the reported deposits may be only a part of more complex groups of metals. In Afghanistan an array of anomalous elements at the known gold placers around Mirzaka and along the Anguri River signals the presence of complex ore deposits. These elements are silver, arsenic, gold, bismuth, cadmium, copper, mercury, indium, molybdenum, lead, antimony, tin, thallium, tungsten, and zinc. They may indicate a Carlin-type gold deposit in which the wall-rocks are enriched in micron-sized particles of gold. Other localities in Afghanistan signalled by the results of the analyses to be anomalous and to merit further geochemical exploration are: (1) a reach of the Panjshir River for beryllium, lead, zinc, chromium and nickel; (2) the area near Bamian for beryllium; (3) the Siakhak village area for gold and copper; (4) around Qala-i-Asad and Shah Agha for lead, zinc, gold, and tungsten. Some attention to the distribution of monazite around Siakhak, Shahjui, Qala-i-Asad, and Shah Agha is justified to determine if this ore mineral for the rare earths and thorium is enriched over its normally expectable trace as an accessory mineral in granitic rocks, pelitic schists, and gneisses. In Iran, the pluton of granodiorite porphyry near Sar Cheshmeh, an area where a huge porphyry copper deposit was being investigated by the Geological Survey of Iran when the present samples were collected in 1968, shows as a strong geochemical anomaly for copper and molybdenum. The granitic area near Meshed is geochemically enriched persistently in beryllium, tin, and barium, and locally in gold, lanthanum, niobium, yttrium, and other elements. This area deserves a thorough regional geochemical survey for beryl and nonberyl sources of beryllium, for fluorite, and for the ores of niobium, tin, barium, the rare earths, and thorium. Other localities in Iran that merit geochemical exploration on the basis of these data are: ;1) the areas between Tabas and Deyhuk, east of Naiband, and south of Naiband for barium and zinc; (2) a locality about midway between Kerman and Sirdjan for barium, lanthanum, strontium, and zinc; (4) the Meskani copper mine area for mercury, lead, and nickel as well as copper; (5) the Talmesi copper mine area for such other elements as barium, cobalt, mercury, strontium, and zinc; (6) a small pluton of granodiorite north of Natanz for tungsten and base metals; (7) the vicinity of Zendjan for auriferous polymetallic sufide deposits; (8) gold in the gorge 15 km east of Miyaneh; and (9) the area near Nodus for gold, base metals, molybdenum, and niobium, and possibly uranium. The Harsit River basin in Turkey appears to be a suitable target for geochemical exploration for gold and low-temperature hydrothermal deposits of base metals, barium, and mercury.

Open-File Report↗

USGS2001

Geologic studies in Alaska by the U.S. Geological Survey, 1999

The collection of nine papers that follow continue the series of U.S. Geological Survey (USGS) investigative reports in Alaska under the broad umbrella of the geologic sciences. The series presents new and sometimes preliminary findings that are of interest to earth scientists in academia, government, and industry; to land and resource managers; and to the general public. Reports presented in Geologic Studies in Alaska cover a broad spectrum of topics from various parts of the State (fig. 1), serving to emphasize the diversity of USGS efforts to meet the Nation's needs for earth-science information in Alaska. The papers in this volume are organized under the topics: Hazards, Geologic Framework, Environment and Climate, and Resources. This organization is intended to reflect the scope and objectives of USGS geologic programs currently active in Alaska. The two Hazards studies discuss volcano-related topics in the seismically active southcentral Alaska region. The first paper revisits the eruptive events of Redoubt Volcano that occurred more than a decade ago and the subsequent development of the Alaska Volcano Observatory (AVO). This treatise documents the historic impact of this eruption and briefly summarizes the state of our knowledge of the other Cook Inlet, Alaska Peninsula, and Aleutian Island volcanoes. Finally, it discusses the recent role that AVO has had in seismic station installation and hazard assessment at volcanically active sites throughout the world. The second paper discusses the eruptive history of Snowy Mountain in the upper Alaska Peninsula. Because subsets of its 25-30 lava flows erupted as packages in short episodes, calculation of the volcano's lifetime average volumetric eruption rate is problematic. A portion of the cone was hydrothermally weakened and collapsed in the late Holocene producing a 22-km2 debris avalanche. Geologic Framework studies provide background information that is the scientific basis for present and future earth science investigations. The first paper compares and contrasts the Insular-Intermontane suture zone (IISZ) of southeast Alaska with the Adria-Europe suture zone (AESZ) of Switzerland and Hungary. The study develops the hypothesis that the zones have distinct differences as well as similarities and neither is a simple lithotectonic terrane boundary. The second paper discusses the relation among volcanic, glacial, and tectonic activity in the Cold Bay and False Pass 1 :250,000-scale quadrangles on the Alaska Peninsula. During Pleistocene time, continental-shelf glaciations and two massive volcanic centers were the dominant controls over landscape development. The third paper gives detailed geologic information for Paleozoic rocks within the Taylor Mountains D-1 quadrangle portion of the Holitna Lowland of southwestern Alaska. Because of the excellent preservation of megafossils, these Silurian and Ordovician strata lend themselves to detailed statigraphic investigations. Further, low thermal alteration indices of this area have made them a potential target of petroleum exploration. The final report in this section discusses the development of a new spectral enhancement approach for interpreting Multispectral Scanner (MSS) and Thematic Mapper (TM) satellite images. This technique enhances the use of remote sensing data in identifying geologic units in areas that have been poorly investigated. This study used this technique to better define the distribution of a JMtu (mafic, ultramafic, and sedimentary) unit and a PzZrqs (pelitic and quartzitic schist) unit. Environment and climate studies are the emphasis of two papers. One presents the first radiocarbon-dated postglacial vegetation history of the Kenai Mountains of southcentral Alaska. This reconstruction is the result of the analysis of pollen assemblages and peat from sediments collected in Tern Lake and presents a minimum age for deglaciation of these interior valleys at 9,31 0±200 yr B .P. Current vegetation, however, developed within the past ca. 2,500 years. A second study discusses the cycling of arsenic and cadmium in sub-arctic boreal forest ecosystems typical of interior Alaska and defines the importance of various natural (geogenic) sources. The transport and uptake into vegetation of these elements from soils developed from loess as well as soils developed from the major rock units is presented. The bioaccumulation of cadmium in willow (Salix sp.) and its potential consequence to the health of browsing animals is discussed. Papers related to resource issues comprise the topic of the final report. This paper presents a brief statistical summary of the geochemistry of rock samples collected in the east-central portion of the Eagle 1 :250,000-scale quadrangle. This study helps define the rock unit source of both resource- and environmental-based chemical elements of interest in the Fortymile mining district. Two bibliographies at the end of the volume list reports covering Alaska earth science topics in USGS publications during 1999 and reports about Alaska by USGS authors in non-USGS publications during the same period.

Alaska↗