USGS Science⌕ Search

SEARCH · USGS Science

Results for “Journal of Geotechnical and Geoenvironmental Engineering”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

1,722 records · Page 44Linked to original sources
USGS1992

Public water-supply systems and water use in Tennessee, 1988

This report summarizes the results of a study conducted by the U.S. Geological Survey, in cooperation with the Tennessee Department of Environment and Conservation (TDEC), Division of Water Supply in 1988. Data gathered during an inventory by the TDEC were collated to determine water use, supply sources, population served, and design and storage capacities of the systems. The inventory was limited to systems that were active on June 30, 1988. Results of a survey of the systems conducted by the Tennessee Department of Health and Environment during 1988 were a primary source of data for this report. Data from computer and manual files maintained by the Tennessee Department of Health and Environment and the U.S. Geological Survey also were used. The Division of Water Supply, TDEC, surveyed 541 public water-supply systems. These systems served 81 percent of the population of the State, or 3.95 million people. The gross per capita use statewide for public-supplied water was 179 gallons per day. Total water withdrawals for public supply increased about 39 percent from 510 million gallons per day (Mgal/d) in 1980, to 708 Mgalld in 1988. During the same period, the population increased about 7 percent. Surface-water withdrawals accounted for 63 percent (446 Mgal/d) of the total water withdrawn in the State. All of these withdrawals occurred in the Tennessee (56 percent or 249 Mgal/d) and the Ohio (44 percent or 197 Mgalld) hydrologic regions. Ground water supplied 262 Mgal/d or 37 percent of the total water withdrawn by public-supply systems statewide. Of that amount, 79 percent, or 208 Mgalld, was used in western Tennessee.

Tennessee↗
USGS2025

Earthquake probabilities and hazards in the U.S. Pacific Northwest

Earthquakes and their cascading consequences pose a significant threat to the people, environment, infrastructure, and economy of the U.S. Pacific Northwest. The Pacific Northwest is susceptible to three types of earthquakes: deep (intraslab) earthquakes, subduction zone (megathrust) earthquakes, and shallow crustal earthquakes. For each of these earthquake types, earth scientists can use a variety of methods to estimate the probability of occurrence for future events, which constrains seismic hazard and informs building codes. The timing of past earthquakes indicates that there is an 85-percent chance of a magnitude 6.5 or greater deep earthquake in the Puget Sound region; a 10-15-percent chance of an approximately magnitude 9 earthquake on the Cascadia Subduction Zone; and a 17-percent chance of a magnitude 6.5 or greater crustal fault earthquake in the Puget Sound region in the next 50 years. Individuals and communities can take simple steps to prepare for and reduce the impact of future earthquakes.

California, Oregon, Washington↗
USGS2026

Origin of the Pd/Pt ratio of the J-M Reef, Stillwater Complex, Montana, USA

The J-M reef of the Stillwater Complex is characterized by a high Pd/Pt ratio (mean ~3.8 with a standard error of 0.03) with a homogeneous geospatial distribution at the deposit scale. In this contribution, we demonstrate that the Pd/Pt ratio of the reef is the product of equilibration of an immiscible sulfide liquid with a silicate melt rich in Pd relative to Pt. Despite the high tenors of the J-M reef sulfides (avg 2,700 ppm Pt and 770 ppm Pt), numerical modeling shows that the parental melts did not have extraordinary Pd and Pt concentrations. Instead, the initial composition of a plausible parental silicate melt can have Pd and Pt contents well within the expected range of a normal, mantle-derived partial melt (i.e., ~10–20 ppb for both Pd and Pt with Pd/Pt of ~1). The relative differences in the partitioning behavior of Pt and Pd between sulfide liquid and silicate melt are unlikely to produce a consistent Pd/Pt ratio across a wide range of silicate melt to sulfide liquid mass ratios (i.e., R factors). Instead, the pre-emplacement fractionation of Pt alloy from S-undersaturated silicate magma accounts for the homogeneous and high Pd/Pt ratio of the J-M reef. We show that batch equilibration of sulfide liquid with silicate melt can produce the high Pd/Pt ratios of the reef if the partition coefficients between sulfide liquid and silicate melt for Pd and Pt are extremely high (>10 6 ). In an alternative model, Pd enrichment could be achieved by sulfide upgrading in resident footwall mush even if the partition coefficients between sulfide liquid and silicate melt are relatively small (between 10 4 and 10 6 ) because the instantaneous mass ratio of silicate melt to sulfide liquid is small (R ≈ 100–700), so the partitioning behavior of Pt and Pd has little impact on the composition of sulfide liquid.

Montana↗
USGS1999

Streamflow, base flow, and ground-water recharge in the Housatonic River basin, western Massachusetts and parts of eastern New York and northwestern Connecticut

Streamflows for selected flow durations from 1 to 99 percent and the August median streamflows were estimated for 11 long-term streamflow-gaging stations in and near the study area. Estimates of streamflow and associated standard errors were determined for selected flow durations from 50 to 99 percent and the August median streamflows for 21 low-flow partial-record stations and for selected flow durations from 1 to 99 percent and the August median streamflows for two partial-record stations and seven short-term discontinued streamflow-gaging stations. Median streamflows per square mile for the 10-, 50-, and 90-percent flow durations and the August median streamflows were 3.90, 1.01, 0.185, and 0.248 cubic feet per second per square mile. Streamflows per square mile at selected flow-duration discharges between 1 and 99 percent at the 41 stations were related to basin characteristics to explain differences in streamflow characteristics. Basin characteristics included basin elevations, extent of stratified-drift deposits, land use, aspect, and underlying bedrock geology types. Most streamflow differences were positively correlated to basin elevation differences, most likely because precipitation increases with elevation, and to stratified-drift deposits, which allow more precipitation to recharge the ground water and to discharge later than do till and bedrock deposits. Mean base flow was computed from continuous records of daily mean discharge at 11 long-term streamflow-gaging stations in and near the study area. Mean annual base flow ranged from 13.4 to 24.5 inches per year. Minimum annual base flow ranged from 45 to 72 percent of mean annual rates at the 11 long-term stations, and the ratio of base flow to streamflow (base-flow index) ranged from 0.55 to 0.80. Base-flow durations between 1 and 99 percent were calculated from streamflow records at the 11 long-term streamflow-gaging stations. Base flow accounted for 45.5 to 85.0 percent of total annual streamflow at the 1- and 99-percent flow durations. Ground-water-recharge rates were computed from continuous records of daily mean discharge at 11 long-term streamflow-gaging stations in and near the study area. Mean annual ground-water-recharge rates ranged from 17.5 to 22.4 inches per year at 10 of the 11 long-term stations. Mean annual ground-water-recharge rates ranged from 2 to 7 inches per year higher than base flow. Minimum annual ground-water-recharge rates ranged from 48 to 72 percent of mean annual ground-water-recharge rates. Mean annual potential ground-water recharge was estimated from monthly climatological data collected at six climatological stations in and near the study area. Mean potential ground-water recharge ranged from about 17.9 to 28.9 inches per year, with a median value of 22.6 inches per year. This median value compares well to that calculated by use of streamflow records at the 11 streamflow-gaging stations (20.0 inches per year). Streamflows per square mile for the 10-, 50-, and 90-percent flow durations at stations in and near the study area were similar to those computed for other unregulated long-term continuous streamflow-gaging stations in central and eastern Massachusetts. Base-flow and ground-water-recharge rates in the study area compared closely to results from other studies in southeastern Massachusetts and Rhode Island, which were based on the same computational methods.

Connecticut, Massachusetts, New York↗
USGS2024

Isotopic evaluation of the National Water Model reveals missing agricultural irrigation contributions to streamflow across the western United States

The National Water Model (NWM) provides critical analyses and projections of streamflow that support water management decisions. However, the NWM performs poorly in lower-elevation rivers of the western United States (US). The accuracy of the NWM depends on the fidelity of the model inputs and the representation and calibration of model processes and water sources. To evaluate the NWM performance in the western US, we compared observations of river water isotope ratios ( 18 O / "> 16 O and 2 H / "> 1 H expressed in δ notation) to NWM-flux-estimated (model) river reach isotope ratios. The modeled estimates were calculated from long-term (2000–2019) mean summer (June, July, and August) NWM hydrologic fluxes and gridded isotope ratios using a mass balance approach. The observational dataset comprised 4503 in-stream water isotope observations in 877 reaches across 5 basins. A simple regression between observed and modeled isotope ratios explained 57.9 % ( δ 18 O) and 67.1 % ( δ 2 H) of variance, although observations were 0.5 ‰ ( δ 18 O) and 4.8 ‰ ( δ 2 H) higher, on average, than mass balance estimates. The unexplained variance suggest that the NWM does not include all relevant water fluxes to rivers. To infer possible missing water fluxes, we evaluated patterns in observation–model differences using δ 18 O diff ( δ 18 O obs − δ 18 O mod ) and d diff ( δ 2 H diff - 8 ⋅ δ 18 O diff "> ). We detected evidence of evaporation in observations but not model estimates (negative d diff and positive δ 18 O diff ) at lower-elevation, higher-stream-order, arid sites. The catchment actual-evaporation-to-precipitation ratio, the fraction of streamflow estimated to be derived from agricultural irrigation, and whether a site was reservoir-affected were all significant predictors of d diff in a linear mixed-effects model, with up to 15.2 % of variance explained by fixed effects. This finding is supported by seasonal patterns, groundwater levels, and isotope ratios, and it suggests the importance of including irrigation return flows to rivers, especially in lower-elevation, higher-stream-order, arid rivers of the western US.

Hydrology and Earth Systems Science↗
USGS2024

Temperature

The “National Field Manual for the Collection of Water-Quality Data” (NFM) provides guidelines and procedures for U.S. Geological Survey (USGS) personnel who collect data used to assess the quality of the Nation’s surface-water and groundwater resources. This chapter, NFM A6.1, provides guidance and protocols for the measurement of temperature of air, of a surface-water body or in groundwater, which include the scientific basis of the measurement, selection and maintenance of equipment, calibration verification, troubleshooting, and procedures for measurement and reporting. It updates and supersedes USGS Techniques of Water-Resources Investigations, book 9, chapter A6.1, version 2.0, by Franceska D. Wilde. Temperature of air and water is routinely measured when water samples are collected, is often measured continually at USGS streamgages, and is a parameter regularly measured during laboratory and field experiments. The field method for measuring temperature described in this chapter is applicable to air and most natural waters. Before 2017, the NFM chapters were released in the USGS Techniques of Water-Resources Investigations series. Effective in 2018, new and revised NFM chapters are being released in the USGS Techniques and Methods series; this series change does not affect the content and format of the NFM. More information is in the general introduction to the NFM (USGS Techniques and Methods, book 9, chapter A0) at https://doi.org/10.3133/tm9A0 . The authoritative current versions of NFM chapters are available in the USGS Publications Warehouse at https://pubs.usgs.gov/ . Comments, questions, and suggestions related to the NFM can be addressed to nfm@usgs.gov .

Techniques and Methods↗
USGS2024

Geological context and significance of the clay-sulfate transition region in Mount Sharp, Gale crater, Mars: An integrated assessment based on orbiter and rover data

On Mars, phyllosilicate (“clay”) minerals are often associated with older terrains, and sulfate minerals are associated with younger terrains, and this dichotomy is taken as evidence that Mars’ surface dried up over time. Therefore, in situ investigation of the Mount Sharp strata in Gale crater, which record a shift from dominantly clay-bearing to sulfate-bearing minerals, as seen in visible−near-infrared orbital reflectance spectra, is a key science objective for the Mars Science Laboratory (MSL) Curiosity rover mission. Here, we present regional (orbiter-based) and in situ (rover-based) evidence for a low-angle erosional unconformity that separates the lacustrine and marginal lacustrine deposits of the Carolyn Shoemaker formation from the dominantly eolian deposits of the lower Mirador formation within the orbitally defined clay-sulfate transition region. The up-section record of wetter (Carolyn Shoemaker formation) to drier (lower Mirador formation) depositional conditions is accompanied by distinct changes in diagenesis. Clay minerals occur preferentially within the Carolyn Shoemaker formation and are absent within the lower members of the Mirador formation. At and above the proposed unconformity, strata are characterized by an increase in diagenetic nodules enriched in X-ray amorphous Mg-sulfate. Early clay formation in the Carolyn Shoemaker formation may have created a hydraulic barrier such that later migrating magnesium- and sulfur-rich fluids accumulated preferentially within the lower members of the Mirador formation. The proposed unconformity may have also acted as a fluid conduit to further promote Mg-sulfate nodule formation at the Carolyn Shoemaker−Mirador formation boundary. These results confirm an association of the clay-sulfate transition with the drying of depositional environments, but they also suggest that at least some orbital sulfate signatures within the region are not time-congruent with the environmental signals extracted from primary sedimentology. Our findings highlight that complex interactions among primary depositional environment, erosion, and diagenesis contribute to the transition in clay-sulfate orbital signatures observed in the stratigraphy of Mount Sharp.

GSA Bulletin↗
USGS2025

Triple-oxygen isotopic evidence of prolonged direct bioleaching of pyrite with O2

Sulfate is often touted as containing atmospheric oxygen whose isotopic signature can constrain redox, environmental conditions, and biological activity. Yet, the amount and isotopic fractionation associated with air-O 2 incorporation during sulfate formation is still debated, making its verification difficult. In this study, we identify a distinct, microbially dominated environment with the potential to preserve maximum signals of air-O 2 in sulfate. We report triple-oxygen isotope data for sulfate produced from pyrite oxidation in microbial and abiotic experiments, and from natural dissolved sulfate from the Rio Tinto, Spain, an acid mine drainage site. The oxygen isotope systematics of sulfate in these environments define a unique kinetic isotope effect associated with initial stage pyrite oxidation by Acidithiobacillus ferrooxidans that preserves >80 % oxygen from air-O 2 in sulfate. Unlike experiments, which evolve toward water-oxygen dominated sulfate on short time scales, Rio Tinto, Spain hosts a microbe rich environment with distinct geochemistry that maintains high O 2 -oxygen in sulfate. Therefore, in addition to containing isotopic records from water and air, sulfates can also contain a biosignature that is promising for understanding conditions on Mars and early Earth.

Earth and Planetary Science Letters↗
USGS2024

Global geologic map of Europa

Discovered by Galileo Galilei more than 400 years ago and imaged in detail by the Voyager 2 Galileo spacecraft, Jupiter’s icy moon Europa has been a source of intrigue. A range of science investigations indicate that it contains the key ingredients for habitability, notably energy, chemistry, and liquid water. Europa’s surface is geologically complex and, based on the dearth of impact craters, interpreted to be as young as ~60 Ma. The array of geologic features that characterize the surface include extensive ridged plains, regions of broad disruption termed chaotic terrain, long, quasi-linear ridges that span thousands of kilometers, and bands as much as 60 kilometers wide and that extend 100s of kilometers. These features, along with other geophysical measurements, indicate the presence of a global briny liquid water ocean beneath the ice shell. It was not until the arrival of the Galileo spacecraft in 1995 that the true nature and level of complexity of the surface was revealed. Although image data returned by Galileo provided insight into the structure of a variety of regions, the entire satellite has yet to be observed at a regional scale (less than 250 meters per pixel) and the detailed geologic nature of much of its surface remains a mystery. Establishing the global context of the distribution and timing of Europan geologic units forms a basis to understand regional and local scale processes, serves as a tool for the planning of future missions, and most of all is essential to gaining insight into the potential habitability of this icy world.

Scientific Investigations Map↗
USGS2026

Hydrological control on soil redox condition and carbon loss of coastal wetland under sea-kevel rise

Coastal wetlands are critical carbon sinks with their biogeochemical and ecological functioning shaped by dynamic hydrological conditions that are increasingly influenced by climate change. A key unresolved question is how hydrologic flow, vegetation response, and rising sea levels interact to regulate soil redox condition and carbon loss in coastal wetlands. Using a field-tested hydrological–biogeochemical–ecological modeling framework, we reveal how the interplay between terrestrial groundwater discharge and tidal fluctuations generates complex groundwater flow patterns at the terrestrial–aquatic interface, and how these patterns modulate soil redox conditions, in turn influencing soil organic matter decomposition and carbon loss. Notably, rising sea levels suppress soil CO 2 emissions while reducing lateral dissolved carbon losses, thereby enhancing litter carbon sequestration under anoxic conditions. As vegetation responds to sea-level rise and carbon inputs diminish, litter carbon subsequently declines. These findings underscore a critical hydrological control on carbon cycling, advancing our understanding of coastal ecosystem resilience in a warming world.

Louisiana↗
USGS2025

U.S. Geological Survey science strategy to address white-nose syndrome and bat health in 2025–2029

Since its discovery in 2006, the fungal disease known as white-nose syndrome (WNS) has killed millions of bats. Of the 47 bat species native to the conterminous United States, Alaska, Hawaii, and Canada, 12 have been affected by WNS, including 3 endangered species and 1 proposed endangered species. WNS has also been detected in 40 States and 9 Canadian Provinces. U.S. Geological Survey (USGS) scientists have been critical in identifying the causal fungus for WNS ( Pseudogymnoascus destructans [Pd]), characterizing the effects of WNS, and tracking the spread of Pd in many bat populations in North America. The mission of the USGS WNS and Bat Health Science Team is to deliver integrated science in order to build resiliency into free-ranging bat populations through more effective WNS management, build capacity for bat health science, and enhance bat health information sharing across USGS science centers and cooperative research units as well as with stakeholders. The USGS can play an important role in supporting regional and national capacity building by providing resources and guidance to local, State, and Tribal management entities and by providing tools to enhance disease management. The USGS Ecosystems Mission Area’s Biological Threats and Invasive Species Research Program is the lead Federal program for free-ranging wildlife disease research and surveillance. As of 2024, guided by the science priorities set by the WNS Steering Committee, USGS scientists are engaged in a nationwide response to WNS. This work is done in close coordination with our partners at the U.S. Fish and Wildlife Service, National Park Service, Bureau of Land Management, U.S. Forest Service of the U.S. Department of Agriculture, U.S. Department of Defense, as well as State and Tribal agencies. In addition to conducting WNS research, the USGS is mapping the spread of WNS and coordinating the North American Bat Monitoring Program (NABat) to understand how WNS and other stressors affect the status and trends of native bats across their range. The USGS is supporting the national WNS response through four science goals: (1) provide situational awareness on the health of bat populations; (2) conduct ecological studies of bats along the gradient of disease vulnerability; (3) contribute actionable science to enhance the resiliency of bat populations; and (4) implement an adaptive, holistic approach to bat health.

Circular↗
USGS2024

Dissolved arsenic concentrations in surface waters within the upper portions of the Klamath River Basin, Oregon and California

Arsenic toxicity is an environmental health problem. Levels of arsenic in surface waters at some locations in the Klamath River Basin in southern Oregon and northern California can exceed the U.S. Environmental Protection Agency (EPA) standard for drinking water. There are both anthropogenic and natural sources of arsenic. The Klamath River Basin consists primarily of volcanic deposits and contains an underground geothermal system with hot springs and warm water wells, all known natural sources of arsenic. Anthropogenic sources of arsenic are related to the agricultural use of herbicides, fungicides, and insecticides. Surface water arsenic levels can also be affected by fertilizer amendments, evaporative concentration, oxygen-level depletion, and various geochemical transformations that can increase arsenic mobilization. In this study by the U.S. Geological Survey and the Bureau of Reclamation, dissolved concentrations of arsenic, copper, and lead were measured in surface waters at 39 unique sites within the upper portions of the Klamath River Basin between 2018 and 2022. In every year, except 2022, sites were sampled four times between April and November. Surface-water arsenic concentrations varied up to four-orders of magnitude among sites. Median arsenic concentration was lowest at Cherry Creek (0.03 micrograms per liter [μg/L]) and highest at Wood Kimball Spring (36.7 μg/L), two sites located north of Upper Klamath Lake. The highest arsenic concentrations (17.4±4.9 μg/L, n =3) were found in drain sites (defined here as a waterbody returning used irrigation water) while the lowest arsenic concentrations were found in an artesian well (0.8 μg/L, n =1). The elevated arsenic concentrations of the drain sites suggest that arsenic might be concentrated or mobilized by agricultural activities, water re-use practices, and (or) by geochemical processes occurring around water stored in drains (that is, in the water column and across sediment water boundaries). A source of arsenic in drain water in the Klamath Strait Drain area includes water used for irrigation originating from Ady Canal. Other potential sources include groundwater, geothermal water, and local soils and sediments. Seasonal differences in surface-water arsenic concentrations were detected at 13 sites, 10 of which had higher arsenic concentrations in summer than in either spring or fall. The sites sampled around Upper Klamath Lake, the impounded rivers, one of the two canal sites, and 5 of the 14 river sites had higher surface-water arsenic concentrations in the summer than in either spring or fall. Surface-water arsenic concentrations from groundwater sources (that is, springs and in the artesian well) did not vary significantly among seasons (p-values greater than 0.1). Median surface-water concentrations of copper and lead ranged from 0.03 to 3.7 μg/L, and from 0.013 to 0.175 μg/L ( n =2–18), respectively. Dissolved concentrations of both metals were below acute toxicity endpoints reported by the EPA for freshwater animals. Surface-water arsenic concentrations varied independently from corresponding changes in surface-water lead or copper concentrations. However, arsenic concentrations measured in bed-sediment samples collected from a subset of sites located north of Upper Klamath Lake correlated strongly and significantly with the corresponding sedimentary lead concentrations ( p =0.015). Aqueous arsenic speciation measured in a subset of sites in 2019 and 2022 showed that all the arsenic existed as arsenic (V), the most oxidized arsenic species, and presumably, the least toxic. The highest proportions of arsenite (As(III)), the presumably most toxic arsenic species, relative to total arsenic concentrations were found at drain sites. Our assessment of dissolved arsenic concentrations in various surface-water bodies in the Upper Klamath River Basin reveals geographical areas of consistently low (below 2.1 μg/L), moderate (below 10 μg/L) and high (above 10 μg/L) surface-water arsenic concentrations. South of Upper Klamath Lake, surface-water arsenic concentrations were consistently higher than 20 μg/L at two drain sites located in an area of predominant agricultural land use with extensive water re-use practices. North of Upper Klamath Lake, surface-water arsenic concentrations greater than 20 μg/L were consistently measured at sites with limited nearby agricultural activities, suggesting a geogenic source. The consistently high arsenic levels from the Wood River at Jackson F. Kimball State Park, Fort Creek, and Crooked Creek, which are sites located at or near headwater spring sources, suggest a natural background source of arsenic. Water flowing downstream from this area could be a potential source of arsenic to Upper Klamath Lake and the Upper Klamath River.

California, Oregon↗
USGS2024

Numerical model of the groundwater-flow system near the southeastern part of Puget Sound, Washington

Groundwater flow in the active model area (AMA) was simulated using a groundwater-flow model. A steady-state model version of the model simulates equilibrium conditions, and a transient model version simulates monthly variability. The model corresponds to the physical and temporal dimensions of the conceptual model and groundwater budget. The steady-state model version represents average conditions for an 11-year period (January 1, 2005–December 31, 2015), and the transient model represents monthly hydrologic variability within that period. The 13-layer model was constructed using MODFLOW-NWT with a uniformly spaced grid consisting of 416 rows, 433 columns, and cells with a horizontal dimension of 500 feet (ft) on a side. The model was calibrated to measured values of water levels in wells and lakes and estimated base flow for selected streamflow measurement stations, commonly referred to as streamgages. Model calibration was accomplished using a combination of manual and automatic methods, including the Model-Independent Parameter Estimation (PEST) program that adjusted model input parameters with the aim of minimizing the difference between estimated and model-simulated values of hydraulic head and base flow. Model boundary conditions consist of all simulated groundwater inflow to and outflow from the AMA. For example, a stream reach that simulates a gain from or loss to groundwater is a boundary condition that allows water to exit or enter, respectively, the groundwater system. Other boundary conditions include springs, seeps, precipitation recharge, groundwater exchange with lakes and Puget Sound, and groundwater pumping. A comparison of the estimated groundwater budget to that simulated by the steady-state model version indicates that the relative percentages of total inflow or total outflow for six major categories of boundary conditions are similar for the two budgets. The model was used to simulate three suites of scenarios of potential drought and water-use changes. Scenario 1 suite consisted of the steady-state model version that was run with 0, 15, 20, and 25 percent reduction of precipitation recharge to assess the corresponding reductions in base flow with decreasing recharge. The last simulation for the scenario 1 suite consisted of the transient model version simulating 3 years of consecutive seasonal drought, defined by the months of May through September, to assess the corresponding base-flow reductions. Scenario 2 suite consisted of the steady-state model version with all simulated groundwater use removed, compared with a simulation that includes current groundwater use to evaluate changes to potentiometric surfaces and base flows. Scenario 3 suite consisted of a transient model version of the model that simulated pumping increases for four different categories of water-supply wells (compared to no pumping increases) to evaluate resulting reductions in base flow. Although, these scenarios provide examples of model applications and useful insights, many other scenarios could be simulated. A description of how to download the model is described in the body of this report. Uncertainty is associated with most model inputs. Groundwater levels, lake levels, and land-surface altitudes are relatively certain; other model inputs are far less certain, including precipitation recharge, base flow, hydraulic properties, water use, and the three-dimensional structure of subsurface hydrogeologic units. Models are useful not because of high levels of accuracy of all model inputs, but because they combine the best information and estimates available, thereby providing the best predictions available related to physical processes. The model described in this report simulates groundwater flow on a regional scale, which has inherent limitations for simulating hydrologic scenarios at local scales. Model structures and inputs were generalized to be consistent with this regional scale. For example, the actual groundwater system has much greater heterogeneity of hydraulic conductivity than is possible within the model’s degrees of freedom. Variations in hydraulic gradients over distances less than 500 ft cannot be simulated. The distances between model features, such as a pumping well and a stream, must be placed at 500-ft intervals and are co-located if both features are within the same model cell.

Washington↗
USGS2025

A regional model comparison between MODPATH and MT3D of groundwater travel time distributions

Groundwater quality changes in wells and streams lag behind changes to land use due to groundwater travel times. Two contaminant transport methods were compared to assess differences in their simulated travel time distributions (TTDs) to streams and wells in the Wisconsin Central Sands. MODPATH simulates advective groundwater flow with particle tracking, while MT3D simulates age-mass using a finite difference solution without dispersion to allow for direct comparison of the two methods. MODPATH appropriately simulates groundwater TTDs from the water table to surface discharge but is subject to inaccuracies at weak-sink well cells due to the flow-model grid discretization and imprecise location of well discharge within well cells. MT3D better represents weak-sink well cells since it removes mass in proportion to the prescribed pumping rate, although travel time within well cells is neglected. Conversely, MT3D's treatment of surface water boundary cells is not as accurate as MODPATH because mass should be removed from the water table rather than the full cell volume. MT3D simulations of TTDs can also be confounded by the instantaneous vertical distribution of mass introduced throughout recharge cells instead of at the water table, which initiates mass along deeper flow paths. We evaluated 9 MODPATH and 13 MT3D implementations, generating differences in median travel times of up to 18 years. Both methods have strengths and weaknesses, with MT3D better representing weak-sink well cell behavior and MODPATH better representing surficial recharge and discharge. The effect of these characteristics on simulated TTDs, along with ideas for ameliorating method weaknesses, is discussed.

Wisconsin↗
USGS1997

Integrity of production wells and confining unit at the Naval Weapons Industrial Reserve Plant, Dallas, Texas, 1995

Ground water in the shallow alluvial aquifer is contaminated at the Naval Weapons Industrial Reserve Plant, Dallas, Texas. Five production wells at the site are cased through the alluvial aquifer and underlying units and are screened in either the Paluxy or Twin Mountains aquifers. Three abandoned wells, originally completed in the Twin Mountains aquifer but filled with drilling mud in 1958, also penetrate the alluvial aquifer. The Paluxy and Twin Mountains aquifers are used for drinking-water supplies in and around the Dallas-Fort Worth metroplex. Trichloroethylene and its degradation products, dichloroethylene and vinyl chloride, and the metal chromium previously have been detected in the shallow alluvial aquifer. Current (1995) analyses of water-quality samples taken from the static water column of the five production wells and one of the abandoned wells indicate no trichloroethylene, dichloroethylene, or vinyl chloride in the water column of these wells. Chromium was detected in all samples, but concentrations were less than the practical quantitation limit, which is the regulatory action level for this site. The results of borehole geophysical log analysis indicate that two of the production wells could have vertically connected intervals where cement bonding in the well annulus is poor. The other production wells have overall good bonding. Temperature logs do not indicate flow behind casing except in the screened interval of one well. Geophysical logs show the Eagle Ford Shale ranges from 147 to 185 feet thick at the site. The Eagle Ford Shale has low permeability and a high plasticity index. These physical characteristics make the Eagle Ford Shale an excellent confining unit.

Texas↗
USGS2024

Status and performance of the ShakeAlert® earthquake early warning system: 2019-2023

The U.S. Geological Survey (USGS)‐operated ShakeAlert® system is the United States West Coast earthquake early warning system ( Given et al. , 2018 ). In this study we detail ShakeAlert’s performance during some of the largest events seen by the system thus far. Statewide public alerting using ShakeAlert messages was authorized in California in October 2019. Over the next few years, public alerts were expanded into Oregon and then into Washington ( U.S. Geological Survey, 2024 ). ShakeAlert source results are routinely compared to the USGS Comprehensive Catalog (ComCat; Guy et al. , 2015 ; U.S. Geological Survey, Earthquake Hazards Program, 2017 ), which contains the earthquake location and magnitude determined using complete waveform data. M 4.5 and larger is the threshold used for public alerting and was deliberately set below the level where damage is likely to compensate for cases where the system underestimates the magnitude. Between 17 October 2019 and 1 September 2023, the ShakeAlert system created 95 events with maximum magnitude estimates of M ≥4.5, the public alerting threshold. 94 of the 95 events were due to real earthquakes. Seven were categorized “false” per ShakeAlert’s internal definition that there was no matching catalog event within 100 km and 30 s of origin time; however, all but one of these were real earthquakes that were poorly located, primarily because they were at the edges of the seismic network. Three detected events were labeled “missed” because they were very poorly located (>100 km location error). In addition, the system did not produce solutions for four ComCat events M ≥4.5 ( U.S. Geological Survey, Earthquake Hazards Program, 2017 ), which were all at the edge of the alerting and network boundaries. The ShakeAlert system has accurately detected the majority of earthquakes that have occurred within the operational region since completing the public rollout, and alerts from the system have been delivered to millions of cell phone users throughout the West Coast.

California, Oregon, Washington↗
USGS2024

Status and understanding of groundwater quality in the Mojave Basin Domestic-Supply Aquifer study unit, 2018—California GAMA Priority Basin Project

Groundwater quality in the western part of the Mojave Desert in San Bernardino County, California, was investigated in 2018 as part of the California State Water Resources Control Board Groundwater Ambient Monitoring and Assessment Program Priority Basin Project. The Mojave Basin Domestic-Supply Aquifer study unit (MOBS) region was divided into two study areas—floodplain and regional—to assess differences between the two major aquifers used for drinking water supply in the area. This assessment characterized the quality of ambient groundwater and not the quality of treated drinking water. The study included three components: (1) a status assessment, which characterized the quality of groundwater resources used for domestic drinking-water supply in the floodplain and regional study areas; (2) a brief understanding assessment, which evaluated factors that could potentially affect the quality of groundwater used by domestic wells in the region; and (3) a comparative assessment between the groundwater resources used by domestic wells and public-supply wells in the two study areas. The domestic-well assessment was based on data collected by the U.S. Geological Survey from 48 domestic wells in January–May 2018. The public-supply assessment was based on data for samples from 322 public-supply wells in 2008–18, either collected by the U.S. Geological Survey or compiled from the California State Water Resources Control Boards Division of Drinking Water publicly available database. Concentrations of water-quality constituents in ambient groundwater were compared to regulatory and non-regulatory benchmarks typically used by the State of California and Federal agencies as health-based or aesthetic standards for public drinking water. Relative concentrations, defined as the measured concentration divided by the benchmark concentration, were classified as high (greater than 1.0), moderate (greater than 0.5 for inorganic constituents or 0.1 for organic and special-interest constituents, and not high), or low (concentrations lower than moderate). The floodplain and regional study areas were divided into 15 and 35 grid cells, respectively, and grid-based methods were used to compute the areal proportions of the two study areas with high, moderate, or low relative concentrations of individual constituents and classes of constituents. For the domestic-supply assessment, one or more inorganic constituents with health-based benchmarks were detected at high relative concentrations in 58 percent of the regional study area and 13 percent of the floodplain study area. The inorganic constituents with health-based benchmarks detected at high relative concentrations in the regional study area were arsenic, chromium and hexavalent chromium, fluoride, adjusted gross alpha particle activity, uranium, molybdenum, strontium, and nitrate; only arsenic was detected at high relative concentrations in the floodplain study area. One or more inorganic constituents with secondary maximum contaminant level benchmarks were detected at high concentrations in 15 and 6.7 percent of the regional and floodplain study areas, respectively. The constituents detected at high relative concentrations in the regional study area were total dissolved solids, chloride, sulfate, and iron; only total dissolved solids and sulfate were detected at high relative concentrations in the floodplain study area. Organic constituents were not detected at moderate or high relative concentrations in either the regional or floodplain study areas. Volatile organic compounds were detected at low relative concentrations in 21 and 27 percent of the regional and floodplain study areas, respectively, and pesticides were detected at low relative concentrations in 9.1 and 20 percent of the regional and floodplain study areas, respectively. The only individual organic constituent detected in more than 10 percent of either study area was the trihalomethane trichloromethane. Total coliform bacteria were detected in 15 and 27 percent of the grid wells in the regional and floodplain study areas, respectively. The greater prevalence of high relative concentrations of many inorganic constituents in the regional study area compared to the floodplain area likely indicates the greater diversity of geologic material at depth in aquifer material and generally finer-grained alluvium compared to the floodplain study area combined with generally older groundwater that has had more contact time with aquifer materials. In general, trace element concentrations (1) increased with increasing groundwater age, (2) increased with distance from recharge sources in the mountains, and (3) increased with closer proximity to some types of geological units. In general, groundwater from domestic wells in the floodplain study area is young, with most samples containing a component of modern groundwater based on tritium and unadjusted carbon-14 activities, whereas groundwater from domestic wells in the regional study area generally is old, with most samples having unadjusted carbon-14 ages of 5,000–40,000 years. Public-supply wells in MOBS generally were deeper than domestic wells and presumably are in contact with older, more weathered alluvium that may have more mobile trace elements, such as arsenic or uranium. However, only 26 percent of the public-supply regional study area had high relative concentrations of inorganic constituents, compared to 58 percent for the domestic regional study area. The percentages of the public-supply and domestic floodplain study areas with high relative concentrations of inorganic constituents were 11 and 13 percent, respectively. The ages of groundwater used by public-supply and domestic wells in each study area were similar, which was not expected given the greater depth of the public-supply wells. Three potential factors may contribute to these results: (1) greater spatial footprint of domestic well network, which may result in domestic wells pumping groundwater from fractured bedrock or mineralized areas not used by public-supply wells; (2) greater pumping rates in public-supply wells, resulting in more water being withdrawn from coarse-grained, heterogeneous alluvium than finer-grained layers, which may have higher concentrations of (or more mobile) inorganic constituents; and (3) a greater degree of well management with public-supply wells, which may include pausing use of or decommissioning wells if treating or blending water is not feasible to lower constituent concentrations.

California↗