USGS Science⌕ Search

SEARCH · USGS Science

Results for “Journal of Geophysical Research - Oceans”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 793 records · Page 44Linked to original sources
USGS2018

Impact of pore fluid chemistry on fine-grained sediment fabric and compressibility

Fines, defined here as grains or particles, less than 75 μm in diameter, exist nearly ubiquitously in natural sediment, even those classified as coarse. Macroscopic sediment properties, such as compressibility, which relates applied effective stress to the resulting sediment deformation, depend on the fabric of fines. Unlike coarse grains, fines have sizes and masses small enough to be more strongly influenced by electrical interparticle forces than by gravity. These electrical forces acting through pore fluids are influenced by pore fluid chemistry changes. Macroscopic property dependence on pore fluid chemistry must be accounted for in sediment studies involving subsurface flow and sediment stability analyses, as well as in engineered flow situations such as groundwater pollutant remediation, hydrocarbon migration, or other energy resource extraction applications. This study demonstrates how the liquid limit‐based electrical sensitivity index can be used to predict sediment compressibility changes due to pore fluid chemistry changes. Laboratory tests of electrical sensitivity, sedimentation, and compressibility illustrate mechanisms linking microscale and macroscale processes for selected pure, end‐member fines. A specific application considered here is methane extraction via depressurization of gas hydrate‐bearing sediment, which causes a dramatic pore water salinity drop concurrent with sediment being compressed by the imposed effective stress increase.

Journal of Geophysical Research↗
USGS2018

Interseismic ground deformation and fault slip rates in the greater San Francisco Bay Area from two decades of space geodetic data

The detailed spatial variations of strain accumulation and creep on major faults in the northern San Francisco Bay Area (North Bay), which are important for seismic potential and evaluation of natural hazards, remain poorly understood. Here we combine interferometric synthetic aperture radar data from the ERS‐1/2 and Envisat satellites between 1992 and 2010 with continuous and campaign GPS data to obtain a high spatial and temporal coverage of ground deformation of the North Bay. The SAR data from both ascending and descending orbits are combined to separate horizontal and vertical components of the deformation. We jointly invert the horizontal component of the mean velocities derived from these data to infer the deep strike‐slip rates on major locked faults. We use the estimated deep rates to simulate the long‐wavelength deformation due to interseismic elastic strain accumulation along these locked faults. After removing the long‐wavelength signal from the InSAR horizontal mean velocity field, we estimate fault‐parallel surface creep rates of up to 2 mm/year along the central section of the Rodgers Creek fault and surface creep rates ranging between 2 and 4 mm/year along the Concord fault. No surface creep is geodetically resolved along the West Napa and Green Valley fault zones. We identified characteristically repeating earthquakes on the Rodgers Creek fault, the West Napa fault, the Green Valley fault, and the Concord fault. Nontectonic deformation in the Geysers geothermal field and in Late Cenozoic basins (Rohnert Park and Sonoma basins) are also observed, likely due to hydrological and sediment‐compaction processes, respectively.

Journal of Geophysical Research B: Solid Earth↗
USGS2019

Thermal, deformation, and degassing remote sensing time-series (A.D. 2000-2017) at the 47 most active volcanoes in Latin America: Implications for volcanic systems

Volcanoes are hazardous to local and global populations, but only a fraction are continuously monitored by ground-based sensors. For example, in Latin America, more than 60% of Holocene volcanoes are unmonitored, meaning long-term multi-parameter datasets of volcanic activity are rare and sparse. We use satellite observations of degassing, thermal anomalies, and surface deformation spanning 17 years at 47 of the most active volcanoes in Latin America, and compare these datasets to ground-based observations archived by the Global Volcanism Program (GVP). This first comparison of multi-satellite time-series on a regional scale provides information regarding volcanic behavior during, non-, pre-, syn- and post-eruptive periods. For example, at Copahue volcano, deviations from background activity in all three types of satellite measurements were manifested months to years in advance of renewed eruptive activity in 2012. By quantifying the amount of degassing, thermal output, and deformation measured at each of these volcanoes, we test the classification of these volcanoes as open or closed volcanic systems. We find that ~28% of the volcanoes do not fall into either classification and the rest show elements of both, demonstrating a dynamic range of behavior that can change over time. Finally, we recommend how volcano monitoring could be improved through better coordination of available satellite-based capabilities and new instruments.

Journal of Geophysical Research↗
USGS2019

Heat and mass transport in a vapor-dominated hydrothermal area in Yellowstone National Park, USA: Inferences from magnetic, electrical, electromagnetic, subsurface temperature and diffuse CO2 flux measurements

Vapor‐dominated hydrothermal systems are characterized by localized and elevated heat and gas flux. In these systems, steam and gas ascend from a boiling water reservoir, steam condenses beneath a low‐permeability cap layer, and liquid water descends, driven by gravity (“heat pipe” model). We combine magnetic, electromagnetic, and geoelectrical methods and CO 2 flux and subsurface temperature measurements in the Solfatara Plateau Thermal Area in the Yellowstone Caldera to address several fundamental questions: (1) What are the structural and/or lithological controls on heat and mass transport in vapor‐dominated areas? (2) What is the geometry and size of convecting multiphase thermal plumes? (3) Are thermal plumes associated with subsurface rock alteration and demagnetization? Magnetic and electromagnetic data inversions suggest an asymmetric 50‐ to 100‐m thick basin of glacial deposits with the thickest part adjacent to the margin of a rhyolite flow. The 3‐D electrical conductivity model in the glacial basin reveals a narrow vertical conductor interpreted as a focused multiphase plume, which coincides at the ground surface with the heat and CO 2 flux maxima. The magnetic data suggest that destruction of magnetic minerals due to rock alteration associated with the hydrothermal plume occurs mainly near the ground surface. We propose a model where the buoyant multiphase plume forms in response to decompression, boiling, and phase separation of pressurized thermal groundwater that discharges from the brecciated base of a rhyolite flow into the basin of glacial deposits. Results from multiphase groundwater flow and heat transport numerical simulations corroborate the first‐order characteristics of this model.

Wyoming↗
USGS2019

The 12 November 2017 Mw 7.3 Ezgeleh–Sarpolzahab (Iran) earthquake and active tectonics of the Lurestan arc

The 12 November 2017 M w 7.3 Ezgeleh‐Sarpolzahab earthquake is the largest instrumentally recorded earthquake in the Zagros Simply Folded Belt by a factor of ∼10 in seismic moment. Exploiting local, regional, and teleseismic data and synthetic aperture radar interferometry imagery, we characterize the rupture, its aftershock sequence, background seismicity, and regional tectonics. The mainshock ruptured slowly (∼2 km/s), unilaterally southward, for ∼40 km along an oblique (dextral‐thrust) fault that dips ∼14°E beneath the northwestern Lurestan arc. Slip is confined to basement depths of ∼12–18 km, resolvably beneath the sedimentary cover which is ∼8 km thick in this area. The gentle dip angle and basement location allow for a broad slip area, explaining the large magnitude relative to earthquakes in the main Fars arc of the Zagros, where shallower, steeper faults are limited in rupture extent by weak sedimentary layers. Early aftershocks concentrate around the southern and western edges of the mainshock slip area and therefore cluster in the direction of rupture propagation, implying a contribution from dynamic triggering. A cluster of events ∼100 km to the south near Mandali (Iraq) reactivated the ∼50° dipping Zagros Foredeep Fault. The basement fault responsible for the Ezgeleh‐Sarpolzahab earthquake probably accounts for the ∼1 km elevation contrast between the Lurestan arc and the Kirkuk embayment but is distinct from sections of the Mountain Front Fault that define frontal escarpments elsewhere in the Zagros. It may be related to a seismic interface underlying the central and southern Lurestan arc, and a key concern is whether or not the more extensive regional structure is also seismogenic.

Journal of Geophysical Research: Solid Earth↗
USGS2019

Lithospheric signature of late Cenozoic extension in electrical resistivity structure of the Rio Grande rift, New Mexico, USA

We present electrical resistivity models of the crust and upper mantle from two‐dimensional (2‐D) inversion of magnetotelluric (MT) data collected in the Rio Grande rift, New Mexico, USA. Previous geophysical studies of the lithosphere beneath the rift identified a low‐velocity zone several hundred kilometers wide, suggesting that the upper mantle is characterized by a very broad zone of modified lithosphere. In contrast, the surface expression of the rift (e.g., high‐angle normal faults and synrift sedimentary units) is confined to a narrow region a few tens of kilometers wide about the rift axis. MT data are uniquely suited to probing the depths of the lithosphere that fill the gap between surface geology and body wave seismic tomography, namely the middle to lower crust and uppermost mantle. We model the electrical resistivity structure of the lithosphere along two east‐west trending profiles straddling the rift axis at the latitudes of 36.2 and 32.0°N. We present results from both isotropic and anisotropic 2‐D inversions of MT data along these profiles, with a strong preference for the latter in our interpretation. A key feature of the anisotropic resistivity modeling is a broad (~200‐km wide) zone of enhanced conductivity (<20 Ωm) in the middle to lower crust imaged beneath both profiles. We attribute this lower crustal conductor to the accumulation of free saline fluids and partial melt, a direct result of magmatic activity along the rift. High‐conductivity anomalies in the midcrust and upper mantle are interpreted as fault zone alteration and partial melt, respectively.

New Mexico↗
USGS2019

Three-dimensional basin and fault structure from a detailed seismic velocity model of Coachella Valley, Southern California

The Coachella Valley in the northern Salton Trough is known to produce destructive earthquakes, making it a high seismic hazard area. Knowledge of the seismic velocity structure and geometry of the sedimentary basins and fault zones is required to improve earthquake hazard estimates in this region. We simultaneously inverted first P wave travel times from the Southern California Seismic Network (39,998 local earthquakes) and explosions (251 land/sea shots) from the 2011 Salton Seismic Imaging Project to obtain a 3-D seismic velocity model. Earthquakes with focal depths ≤10 km were selected to focus on the upper crustal structure. Strong lateral velocity contrasts in the top ~3 km correlate well with the surface geology, including the low-velocity (<5 km/s) sedimentary basin and the high-velocity crystalline basement rocks outside the valley. Sediment thickness is ~4 km in the southeastern valley near the Salton Sea and decreases to <2 km at the northwestern end of the valley. Eastward thickening of sediments toward the San Andreas fault within the valley defines Coachella Valley basin asymmetry. In the Peninsular Ranges, zones of relatively high seismic velocities (~6.4 km/s) between 2 to 4 km depth may be related to Late Cretaceous mylonite rocks or older inherited basement structures. Other high-velocity domains exist in the model down to 9 km depth and help define crustal heterogeneity. We identify a potential fault zone in Lost Horse Valley unassociated with mapped faults in Southern California from the combined interpretation of surface geology, seismicity, and lateral velocity changes in the model.

California↗
USGS2018

Induced earthquake families reveal distinctive evolutionary patterns near disposal wells

The timing of events in seismic sequences can provide insights into the physical processes controlling fault slip. In southern Kansas, the rate of earthquakes rose rapidly starting in 2013 following expansion of energy production into the area, demanding the disposal of large volumes of wastewater into deep wells. Seismicity catalogs that are complete to low magnitudes can provide insights into the physical processes that induce seismicity near wastewater disposal. We develop a catalog of over 130,000 earthquakes recorded in southern Kansas from mid‐March 2014 through December 2017 by applying a matched filter algorithm to an original catalog of 5,831 template earthquakes. Detections have nearly identical waveforms to their associated template event and represent slip on nearly co‐located sections of a fault. We select template events with at least 100 associated detections and examine the characteristics of these prolific families of earthquakes. We find that families located close (<10 km) to areas with significant volumes of injected fluids have near‐Poissonian interevent times and the families remain active over longer durations. Families farther from high‐volume injection wells show strong clustering of interevent times and shorter sequence durations. We conclude that increasing pore fluid pressures from nearby disposal of large volumes of wastewater is the primary driver of these long duration episodes, with earthquake‐earthquake interactions driving sequences at greater distance from the wells.

Kansas↗
USGS2018

Quantifying uncertainty in cumulative surface slip along the Cucamonga Fault, a crustal thrust fault in southern California

Studies of historic earthquake ground surface ruptures show that displacements along strike are spatially variable. As a result, latest Quaternary slip rates developed from a spatially restricted set of cumulative displacement measurements may not accurately represent fault velocity. Here we examine the uncertainties associated with slip on the Cucamonga Fault, which is part of a network of faults that have generated damaging historical earthquakes in and around Los Angeles, California. Numerous scarps along its ~25‐km length are well expressed on alluvial fans. We make 310 measurements of vertical separation across the scarps using lidar data. We show that the dispersion of the vertical separations cannot be explained by our best estimates of analytical uncertainties alone. Additional epistemic uncertainties are required. We find that the magnitude of the required epistemic uncertainty is typically larger than analytical uncertainty by a factor of 3 and typically about 22% of the maximum vertical separation. These relationships appear to hold at several spatial scales. We examine three potential sources of epistemic uncertainty and find that none among surface age uncertainty, fault dip, and anthropogenic landscape alteration is likely sufficient to explain the overdispersion of the data, which suggests differences in cumulative strain along the strike of the fault. We calculate a range of dip‐slip rates between 0.4 and 2.6 mm/year. In light of our results, we suggest that future thrust‐fault slip‐rate studies adopt an epistemic uncertainty of 22% of the maximum value for vertical separation measurements, unless there are sufficient data to demonstrate otherwise.

California↗
USGS2018

Characteristic earthquake magnitude frequency distributions on faults calculated from consensus data in California

An estimate of the expected earthquake rate at all possible magnitudes is needed for seismic hazard forecasts. Regional earthquake magnitude frequency distributions obey a negative exponential law (Gutenberg‐Richter), but it's unclear if individual faults do. We add three new methods to calculate long‐term California earthquake rupture rates to the existing Uniform California Earthquake Rupture Forecast (UCERF3) efforts to assess method and parameter dependence on magnitude frequency results for individual faults. All solutions show strongly characteristic magnitude‐frequency distributions on the San Andreas and other faults, with higher rates of large earthquakes than would be expected from a Gutenberg‐Richter distribution. This is a necessary outcome that results from fitting high fault slip rates under the overall statewide earthquake rate budget. We find that input data choices can affect the nucleation magnitude‐frequency distribution shape for the San Andreas fault; solutions are closer to a Gutenberg‐Richter distribution if the maximum magnitude allowed for earthquakes that occur away from mapped faults (background events) is raised above the consensus threshold of M =7.6, if the moment rate for background events is reduced, or if the overall maximum magnitude is reduced from M =8.5. We also find that participation magnitude‐frequency distribution shapes can be strongly affected by slip‐rate discontinuities along faults that may be artifacts related to segment boundaries.

California↗
USGS2019

Earthquake stress drop and Arias Intensity

We determine earthquake stress drops directly from the Arias intensity database of NGA-West2. Arias intensity (Arias, 1970) is an engineering measure proportional to the integral of the absolute value of acceleration squared, over the significant duration of the signal. As such, it is closely related to root-mean-square acceleration, and can readily be connected to earthquake stress drop (Hanks and McGuire, 1981). Arias intensity records out to 100 km yield stable stress drops for moderate-to-large magnitude earthquakes, M6.5+; for smaller events ~M4.5 – 6.5, only closer-in records yield stable results. For the 116 events considered, stress drops are about 35% larger for Class 1 mainshocks than for traditional on-fault Class 2 aftershocks, and smaller for those aftershocks close to the main fault plane. Aftershock stress drops show large variability, however, implying that on average they re-rupture weakened patches, but can also rupture intact rock or high-stress asperities. We observe an increase of stress drop with earthquake depth similar to that of other studies but do not find any significant faulting mechanism dependence. The variability of the Arias intensity-based stress drop is lower than that of eGf-based stress drops from Baltay et al. (2010, 2011), and nearly on par with variability seen in ground-motion prediction equations. The Arias intensity stress drop is a novel and promising method to estimate stress drop without the need for path and site corrections, and yields further insight into the connection between source physics and ground-motion.

Journal of Geophysical Research B: Solid Earth↗
USGS2019

Evaluation of temporally correlated noise in global navigation satellite system time series: Geodetic monument performance

Estimates of background noise of Global Positioning System‐derived time series of positions for 740 sites in the western United States are examined. These data consist of daily epochs of three components of displacements that are at least 9.75 years long within the interval between 2000 and 2018. We find that these time series have significant temporal correlations that could be represented as a combination of white, flicker, random‐walk, and band‐pass filtered noise. From this noise model, two other metrics are computed: the root‐mean‐square of seasonal noise, that is, the integrated power spectrum between 0.5 and 2 cycles per year, and the standard error in position rate for a 10‐year‐long time series. These two metrics are used to evaluate potential correlations with different geographic regions and with different methods of construction of monuments used to attach the Global Positioning System antenna to the Earth's surface. The sites with the lowest noise, both in terms of rate error and seasonal root‐mean‐square, are located in semiarid regions east of the rain shadow provided by the Cascade and Sierra Nevada mountain ranges. In addition, according to statistical rank tests, monuments known as drilled‐braced monuments perform 30% to 50% better than other monument types (buildings, boreholes, piers, etc.) in terms of having smaller rate errors and lower seasonal noise.

Journal of Geophysical Research B: Solid Earth↗
USGS2018

Earthquakes induced by hydraulic fracturing are pervasive in Oklahoma

Wastewater disposal is generally accepted to be the primary cause of the increased seismicity rate in Oklahoma within the past decade, but no statewide analysis has investigated the contribution of hydraulic fracturing (HF) to the observed seismicity or the seismic hazard. Utilizing an enhanced seismicity catalog generated with multi‐station template matching from 2010‐2016 and all available hydraulic fracturing information, we identified 274 HF wells that are spatiotemporally correlated with bursts of seismicity. The majority of HF induced seismicity cases occurred in the SCOOP/STACK plays, but we also identified prominent cases in the Arkoma Basin as well as some more complex potential cases along the edge of the Anadarko Platform. For HF treatments where we have access to injection parameters, modeling suggests poroelastic stresses are likely responsible for seismicity, but we cannot rule out direct pore pressure effects as a contributing factor. In all of the 16 regions we identified, ≥75% of the seismicity correlated with reported HF wells. In some regions, >95% of seismicity correlated with HF wells and >50% of the HF wells correlated with seismicity. Overall, we found ~700 HF induced earthquakes with M ≥ 2.0, including 12 events with M 3.0‐3.5. These findings suggest state regulations implemented in 2018 that require operators in the SCOOP/STACK plays to take action if a M > 2 earthquake occurs could have a significant impact on future operations.

Oklahoma↗
USGS2019

Ground-motion residuals, path effects, and crustal properties: A pilot study in southern California

To improve models of ground motion estimation and probabilistic seismic hazard analyses, the engineering seismology field is moving toward developing fully nonergodic ground motion models, models specific for individual source‐to‐site paths. Previous work on this topic has examined systematic variations in ground‐motion along particular paths (from either recorded or simulated earthquake data) and has not included physical properties of the path. We present here a framework to include physical path properties, by seeking correlations between ground motion amplitudes along specific paths and crustal properties, specifically seismic velocity and anelastic attenuation, along that path. Using a large data set of small‐magnitude earthquakes recorded in Southern California, we find a correlation between the gradient of seismic S wave velocity and the path term residual, after accounting for an average geometric spreading and anelastic attenuation, indicating that heterogeneity in crustal velocity primarily controls the path‐specific attenuation. Even in aseismic regions, details of path‐specific ground motion prediction equations can be developed from crustal structure and property data.

California↗
USGS2019

Four major Holocene earthquakes on the Reelfoot fault recorded by sackungen in the New Madrid seismic zone, USA

Three sequences of well-documented, major ~M7+ earthquakes (1811-1812 CE, ~1450 CE, and ~900 CE) in the New Madrid seismic zone, USA, contribute significantly to seismic hazard in the region. However, it is unknown whether this <550 yr recurrence interval has been constant throughout the Holocene given limited geomorphic evidence of prior earthquakes. We extend the record of paleoearthquakes along the Reelfoot fault via investigation of ridge-top gravitational failure features, interpreted as sackungen. The sackungen occur in bluffs along the eastern margin of the Mississippi River floodplain and are concentrated near (<15 km) the southwest-dipping Reelfoot reverse fault. A paleoseismic trench excavated across sackungen at the Paw Paw site exposed four packages of colluvial sediment that postdate 30-11 ka Peoria loess. We interpret the colluvial packages to have been deposited following episodic failure of the sackungen as a result of strong ground motions from the following sequence of earthquakes: event 4, 1640 ± 1730 BCE; event 3, 340 ± 670 CE; event 2, 1430 ± 380 CE; and event 1, 1810 ± 50 CE (2-sigma). Event timing corresponds to previously documented earthquakes and represents the longest archive of paleoearthquakes on the Reelfoot fault. If the trenched sackungen record all major Reelfoot fault earthquakes, our observations in combination with prior investigations indicate a period of quiescence from at least 11 – 4.7 ka, followed by four major seismic events culminating in the 1811-1812 CE sequence. This clustered earthquake recurrence helps place bounds on seismic-hazard and geodynamic models in the New Madrid seismic zone.

Arkansas, Missouri↗
USGS2020

Partly cloudy with a chance of lava flows: Forecasting volcanic eruptions in the 21st century

A primary goal of volcanology is forecasting hazardous eruptive activity. Despite much progress over the last century, however, volcanoes still erupt with no detected precursors, lives and livelihoods are lost to eruptive activity, and forecasting the onsets of eruptions remains fraught with uncertainty. Long‐term forecasts are generally derived from the geological and historical records, from which recurrence intervals and styles of activity can be inferred, while shorter‐term forecasts are derived from patterns in monitoring data. Information from geology and monitoring data can be evaluated and combined using statistical analysis, expert elicitation, and conceptual and or mathematical models. Integrative frameworks, such as event trees, combine this diversity of information to produce probabilistic forecasts that can inform the style and scale of the societal response to a potential future eruption. Several developments show promise to revolutionize the utility and accuracy of these forecasts. These include growth in the quantity and quality of multidisciplinary monitoring data, coupled with increases in computing power; machine learning algorithms, which will allow far better utilization of this growing volume of data; and new physiochemical volcano models and data assimilation algorithms, which take advantage of a wide range of monitoring data and realistic physics to better predict the evolution of a given physical state. Although eruption forecasts may never be as generally reliable as weather forecasts, and great caution must be exercised when attempting to predict highly complex volcanic behavior, these and other innovations—particularly when combined in integrative, fully probabilistic forecasting frameworks—should help volcanologists to better issue warnings of volcanic activity on societally relevant time frames.

Hawaii↗
USGS2019

Depth determination of the 2010 El Mayor‐Cucapah earthquake sequence (M ≥ 4.0)

The 2010 M W 7.2 El Mayor‐Cucapah earthquake ruptured a zone of ~120 km in length in northern Baja California. The geographic distribution of this earthquake sequence was well constrained by waveform relocation. The depth distribution, however, was poorly determined as it is near the edge of, or outside, the Southern California Seismic Network. Here we use two complementary methods to constrain the focal depths of moderate‐sized events ( M ≥ 4.0) in this sequence. We first determine the absolute earthquake depth by modeling the regional depth phases at high frequencies (~1 Hz). We mainly focus on Pn and its depth phases pPn and sPn , which arrive early at regional distance and are less contaminated by crustal multiples. To facilitate depth phase identification and to improve signal‐to‐noise ratio, we take advantage of the dense Southern California Seismic Network and use array analysis to align and stack Pn waveforms. For events without clear depth phases, we further determine their relative depths with respect to those with known depths using differential travel times of the Pn , direct P , and direct S phases recorded for event pairs. Focal depths of 93 out of 122 M ≥ 4.0 events are tightly constrained with absolute uncertainty of about 1 km. Aftershocks are clustered in the depth range of 3–10 km, suggesting a relatively shallow seismogenic zone, consistent with high surface heat flow in this region. Most aftershocks are located outside or near the lower terminus of coseismic high‐slip patches of the main shock, which may be governed by residual strains, local stress concentration, or postseismic slip.

Baja California↗
USGS2019

Assessing seasonal changes in microgravity at Yellowstone caldera

Microgravity time series at active volcanoes can provide an indication of mass change related to subsurface magmatic processes, but uncertainty is often introduced by hydrologic variations and other noise sources that cannot easily be isolated. We empirically assessed seasonality and noise by conducting four surveys over the course of May-October 2017 at Yellowstone caldera, Wyoming. Yellowstone experiences frequent changes in the rates and styles of seismicity and surface deformation, but the mechanisms of these changes are poorly understood because the characteristics of the driving fluids are not clear. Past gravity data from the caldera have yielded ambiguous results, possibly due to hydrologic noise. Given the strong visually observable changes in surface water and snow conditions over the course of our surveys, we expected to see significant variations in gravity. The net change in gravity, however, was less than 20 µGal at most sites, and there was no strong correlation with river and lake levels or snow conditions. Seasonal changes in gravity are therefore small compared to those that would be expected from magmatic activity, although they may be on the same order as those associated with Yellowstone’s hydrothermal system. We did find that noise levels in gravity data were highly dependent on site characteristics, with bedrock sites away from trees yielding the lowest levels of noise, and thin concrete pads in forested areas the highest. These results can be used to plan future surveys at Yellowstone and to reinterpret past data, and they provide guidance in terms of best practices for repeat gravity work on volcanoes worldwide.

Wyoming↗