USGS Science⌕ Search

SEARCH · USGS Science

Results for “Report Series”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 775 records · Page 43Linked to original sources
USGS2016

Post-Hurricane Isaac coastal oblique aerial photographs collected along the Alabama, Mississippi, and Louisiana barrier islands, September 2–3, 2012

The U.S. Geological Survey (USGS), as part of the National Assessment of Coastal Change Hazards project, conducts baseline and storm-response photography missions to document and understand the changes in vulnerability of the Nation's coasts to extreme storms (Morgan, 2009). On September 2-3, 2012, the USGS conducted an oblique aerial photographic survey along the Alabama, Mississippi, and Louisiana barrier islands aboard a Cessna 172 (aircraft) at an altitude of 500 feet (ft) and approximately 1,000 ft offshore. This mission was flown to collect post-Hurricane Isaac data for assessing incremental changes in the beach and nearshore area since the last survey, flown in September 2008 (central Louisiana barrier islands) and June 2011 (Dauphin Island, Alabama, to Breton Island, Louisiana), and the data can be used in the assessment of future coastal change. The photographs provided in this report are Joint Photographic Experts Group (JPEG) images. ExifTool was used to add the following to the header of each photo: time of collection, Global Positioning System (GPS) latitude, GPS longitude, keywords, credit, artist (photographer), caption, copyright, and contact information. The photograph locations are an estimate of the position of the aircraft at the time the photograph was taken and do not indicate the location of any feature in the images (see the Navigation Data page). These photographs document the state of the barrier islands and other coastal features at the time of the survey. Pages containing thumbnail images of the photographs, referred to as contact sheets, were created in 5-minute segments of flight time. These segments can be found on the Photos and Maps page. Photographs can be opened directly with any JPEG-compatible image viewer by clicking on a thumbnail on the contact sheet. In addition to the photographs, a Google Earth Keyhole Markup Language (KML) file is provided and can be used to view the images by clicking on the marker and then clicking on either the thumbnail or the link above the thumbnail. The KML files were created using the photographic navigation files. These KML file(s) can be found in the kml folder.

Alabama, Mississippi, Louisiana↗
USGS2010

Spatial mapping and attribution of Wyoming wind turbines

This Wyoming wind-turbine data set represents locations of wind turbines found within Wyoming as of August 1, 2009. Each wind turbine is assigned to a wind farm. For each turbine, this report contains information about the following: potential megawatt output, rotor diameter, hub height, rotor height, land ownership, county, wind farm power capacity, the number of units currently associated with its wind farm, the wind turbine manufacturer and model, the wind farm developer, the owner of the wind farm, the current purchaser of power from the wind farm, the year the wind farm went online, and the status of its operation. Some attributes are estimates based on information that was obtained through the American Wind Energy Association and miscellaneous online reports. The locations are derived from August 2009 true-color aerial photographs made by the National Agriculture Imagery Program; the photographs have a positional accuracy of approximately ?5 meters. The location of wind turbines under construction during the development of this data set will likely be less accurate than the location of turbines already completed. The original purpose for developing the data presented here was to evaluate the effect of wind energy development on seasonal habitat used by greater sage-grouse. Additionally, these data will provide a planning tool for the Wyoming Landscape Conservation Initiative Science Team and for other wildlife- and habitat-related projects underway at the U.S. Geological Survey's Fort Collins Science Center. Specifically, these data will be used to quantify disturbance of the landscape related to wind energy as well as quantifying indirect disturbances to flora and fauna. This data set was developed for the 2010 project 'Seasonal predictive habitat models for greater sage-grouse in Wyoming.' This project's spatially explicit seasonal distribution models of sage-grouse in Wyoming will provide resource managers with tools for conservation planning. These specific data are being used for assessing the effect of disturbance resulting from wind energy development within Wyoming on sage-grouse populations.

Data Series↗
USGS2016

Post-Hurricane Ike coastal oblique aerial photographs collected along the Alabama, Mississippi, and Louisiana barrier islands and the north Texas coast, September 14-15, 2008

The U.S. Geological Survey (USGS), as part of the National Assessment of Coastal Change Hazards project, conducts baseline and storm-response photography missions to document and understand the changes in vulnerability of the Nation's coasts to extreme storms (Morgan, 2009). On September 14-15, 2008, the USGS conducted an oblique aerial photographic survey along the Alabama, Mississippi, and Louisiana barrier islands and the north Texas coast, aboard a Beechcraft Super King Air 200 (aircraft) at an altitude of 500 feet (ft) and approximately 1,200 ft offshore. This mission was flown to collect post-Hurricane Ike data for assessing incremental changes in the beach and nearshore area since the last survey, flown on September 9-10, 2008, and the data can be used in the assessment of future coastal change. The photographs provided in this report are Joint Photographic Experts Group (JPEG) images. ExifTool was used to add the following to the header of each photo: time of collection, Global Positioning System (GPS) latitude, GPS longitude, keywords, credit, artist (photographer), caption, copyright, and contact information. The photograph locations are an estimate of the position of the aircraft at the time the photograph was taken and do not indicate the location of any feature in the images (see the Navigation Data page). These photographs document the state of the barrier islands and other coastal features at the time of the survey. Pages containing thumbnail images of the photographs, referred to as contact sheets, were created in 5-minute segments of flight time. These segments can be found on the Photos and Maps page. Photographs can be opened directly with any JPEG-compatible image viewer by clicking on a thumbnail on the contact sheet. In addition to the photographs, a Google Earth Keyhole Markup Language (KML) file is provided and can be used to view the images by clicking on the marker and then clicking on either the thumbnail or the link above the thumbnail. The KML file was created using the photographic navigation files. The KML file can be found in the kml folder.

Alabama, Louisiana, Mississippi, Texas↗
USGS2013

Estimated annual agricultural pesticide use for counties of the conterminous United States, 1992--2009

This report provides estimated annual agricultural pesticide use for counties of the conterminous United States for 459 compounds from 1992 through 2009 following the methods described in Thelin and Stone (2013). As described in Thelin and Stone (2013), U.S. Department of Agriculture county-level data for harvested-crop acreage were used in conjunction with proprietary Crop Reporting District (CRD)-level pesticide-use data to estimate county-level pesticide use. Estimated pesticide use (EPest) values were calculated with both the EPest-high and EPest-low methods. The distinction between the EPest-high method and the EPest-low method is that there are more counties with estimated pesticide use for EPest-high compared to EPest-low (Thelin and Stone, 2013). The estimates of annual agricultural pesticide use are provided in tab-delimited files and organized by compound, year, state Federal Information Processing Standard (FIPS) code, county FIPS code, and kg (amount in kilograms). EPest-high county pesticide-use estimates were divided into tables 1 through 7 by pesticide name: Table 1: 2, 4-D through Chlordimeform Table 2: Chlorethoxyfos through Diflufenzopyr Table 3: Dimethenamid through Gibberellic acid Table 4: Glufosinate through Metriam Table 5: Metolachlor through Propazine Table 6: Propiconazole through Triazamate Table 7: Tribenuron methyl through Zoxamide EPest-low county pesticide-use estimates were divided into tables 8 through 14 by pesticide name: Table 8: 2, 4-D through Chlordimeform Table 9: Chlorethoxyfos through Diflufenzopyr Table 10: Dimethenamid through Gibberellic acid Table 11: Glufosinate through Metriam Table 12: Metolachlor through Propazine Table 13: Propiconazole through Triazamate Table 14: Tribenuron methyl through Zoxamide

Data Series↗
USGS2015

Baseline coastal oblique aerial photographs collected from Owls Head, Maine, to the Virginia/North Carolina border, May 19-22, 2009

The U.S. Geological Survey (USGS) conducts baseline and storm response photography missions to document and understand the changes in vulnerability of the Nation's coasts to extreme storms. On May 19-22, 2009, the USGS conducted an oblique aerial photographic survey from Owls Head, Maine, to the Virginia/North Carolina border aboard a Cessna 207A at an altitude of 500 feet (ft) and approximately 1,200 ft offshore. This mission was flown to collect baseline data for assessing incremental changes since the last survey, and the data can be used in the assessment of future coastal change. The images provided in this report are Joint Photographic Experts Group (JPEG) images. ExifTool was used to add the following to the header of each photo: time of collection, Global Positioning System (GPS) latitude, GPS longitude, keywords, credit, artist (photographer), caption, copyright, and contact information. The photograph locations are an estimate of the position of the aircraft and do not indicate the location of any feature in the images. These photographs document the state of the coastal features at the time of the survey. Pages containing thumbnail images of the photographs, referred to as contact sheets, were created in 5-minute segments of flight time. These segments can be found on the Photos and Maps page. The photographs can be opened directly with any JPEG-compatible image viewer by clicking on a thumbnail on the contact sheet. Table 1 provides detailed information about the GPS location, name, date, and time for each of the 12,726 photographs taken along with links to each photograph. In addition to the photographs, a Google Earth Keyhole Markup Language (KML) file is provided and can be used can be used to view the images by clicking on the marker and then clicking on either the thumbnail or the link above the thumbnail. The KML files were created using the photographic navigation files

Connecticut, Deleware, Maine, Massachusetts, New H↗
USGS2007

Outcrop descriptions and fossils from the Upper Cretaceous Frontier Formation, Wind River Basin and adjacent areas, Wyoming: Chapter 11 in Petroleum systems and geologic assessment of oil and gas resources in the Wind River Basin Province, Wyoming

The Wind River Basin of central Wyoming trends west-northwest from near the community of Alcova to near the town of Dubois (fig. 1). On the perimeter of the basin, outcrops of the Frontier Formation were examined and described during the years 1972-1975. Invertebrate fossils were collected from those outcrops during the years 1972-1996, in places with the assistance of other earth scientists (see Acknowledgments). The Frontier Formation in the Wind River Basin, ranging in thickness from 650 to 1,000 ft thick, consists mainly of sandstone, siltstone, shale, and bentonite of early Late Cretaceous age. The Frontier conformably overlies the Mowry Shale and is conformably overlain by the Cody Shale. A basal unit of the Cody, a sequence of marine noncalcareous shale, is named the Sage Breaks Member. The Frontier consists of two or three members, separated by disconformities; in ascending order, the Belle Fourche, Emigrant Gap, and Wall Creek. At several localities, the Emigrant Gap Member is missing. The formation was deposited mainly in marine environments, although nonmarine beds are conspicuous in the western part of the basin. Strata of the Frontier record a succession of marine regressions and transgressions. Molluscan fossils from the marine beds were identified and related to the chronostratigraphic chart shown in figure 2. The absolute ages on the chart were determined and supplied by J.D. Obradovich (Cobban and others, 2006). In this region, the Belle Fourche is of Cenomanian age, the Emigrant Gap is of early middle Turonian age, and the Wall Creek is of late Turonian and early Coniacian ages. The main purpose of this report is to present biostratigraphic information from studies of the Frontier Formation in the Wind River Basin that could be useful for future stratigraphic investigations of the formation throughout Wyoming. Locations of outcrop sections and associated fossil collections are depicted on accompanying maps and aerial photographs. Graphic descriptions of strata in the outcrops and identifications of fossils from nearby localities also are presented. Those fossils named on the graphic sections commonly have the most restricted time-spans. Fossils collected near the outcrops studied are not always named on the enclosed graphic sections because (1) the specimens are less useful for dating the enclosing beds, (2) the specimens are duplicates, or (3) the specimens could not be related to specific strata in the sections. The names, locations, and members of the outcrop sections and the approximate ages of the constituent strata are summarized in table 1. The index maps used to show locations of outcrop sections and fossil collections are from scanned versions of U.S. Geological Survey topographic maps of various scales and were obtained from TerraServer®. The portion of each map used depended on the areal distribution of the localities involved. The named quadrangles used for locality descriptions, however, all refer to 7½-minute, 1:24,000-scale quadrangles (for example, “Alcova”). The aerial photographs also are from TerraServer®; http://www.terraserver.com/.

Wyoming↗
USGS2014

Geohydrologic and water-quality data in the vicinity of the Rialto-Colton Fault, San Bernardino, California

The Rialto-Colton Basin is in western San Bernardino County, about 60 miles east of Los Angeles, California. The basin is bounded by faults on the northeast and southwest sides and contains multiple barriers to groundwater flow. The structural geology of the basin leads to complex hydrology. Between 2001 and 2008, in an effort to better understand the complex hydrologic system of the Rialto-Colton Basin, seven multiple-well monitoring sites were constructed. Two to six observation wells were installed in the borehole at each site; a total of 32 observation wells were installed. This report presents geologic, hydrologic, and water-quality data collected from these seven multiple-well monitoring sites. Descriptions of the collected drill cuttings were compiled into lithologic logs for each monitoring site. The lithologic logs are summarized along with the geophysical logs, including gamma-ray, spontaneous potential, resistivity, and electromagnetic induction tool logs. At selected sites, sonic tool logs also were recorded. Periodic water-level measurements are reported, and water-level data are displayed on hydrographs. Water levels at multiple-well monitoring sites in the northern part of the study area differed between the shallow and deep observation wells; in the remaining multiple-well monitoring sites, water levels differed little with depth. Along the southern trace of the Rialto-Colton Fault, water levels are slightly higher east of the fault than west of the fault. Selected water-quality data for 21 of the observation wells show water from wells in the northern and central parts of the study area is calcium-carbonate water. In the southern part of the study area, water from wells screened above 400 feet below land surface is of mixed type or is calcium-carbonate water. Water from wells screened greater than 400 feet below land surface in the southern part of the study area is sodium-carbonate or sodium-mixed anion water. Water from most wells in the study area plots above the Global Meteoric Water Line along an apparent local meteoric water line, indicating the water has not experienced substantial evaporation before infiltration. A few samples from shallow wells in the study area plot slightly to the right of the Global Meteoric Water Line, possibly indicating the water experienced some evaporation before recharge.

California↗
USGS2011

Geophysical, geochemical, mineralogical, and enivronmental data for rock samples collected in a mineralized volcanic environment, upper Animas River watershed, Colorado

This report provides analyses of 90 rock samples collected in the upper Animas River watershed near Silverton, Colo., from 2001 to 2007. The samples are analyzed for geophysical, geochemical, mineralogical, and environmental rock properties of acid neutralizing capacity and net acid production. The database is derived from both published (n=68) and unpublished (n=32) data. New for all samples are geophysical measurements of electrical resistivity, density, and porosity. Rock samples were acquired from 12 geologic units that include key Tertiary volcanic and plutonic lithologies, all with varying degrees of alteration. The purpose of this study is to * provide a comprehensive and complete record of U.S. Geological Survey rock samples collected and similarly analyzed in the upper Animas River watershed for various physical, chemical, and geoenvironmental properties; * provide measurements of geophysical rock properties of lithologic units to establish ground truth with respect to watershed-scale airborne magnetic and electrical survey data; * use the data to interpret the airborne geophysical anomalies to characterize rocks in terms of acid neutralizing capacity or net acid production; and * provide measurements to study the geochemical, mineralogical, and geophysical characteristics of rocks having weak to extreme degrees of alteration and to develop an understanding of how these characteristics change with alteration type. Data are provided in two digital formats: an Arc/Info geodatabase and a Microsoft Excel spreadsheet.

Data Series↗
USGS2011

Water-quality data for the Russian River Basin, Mendocino and Sonoma Counties, California, 2005-2010

Since 2003, the U.S. Geological Survey, in cooperation with the Sonoma County Water Agency, has been collecting chemical, microbiological, and isotopic data from surface-water and groundwater sites in Mendocino and Sonoma Counties, California. The investigation is being conducted to determine water-quality baseline conditions for the Russian River during the summer months and to characterize the water-quality in the area of the Sonoma County Water Agency's water-supply facility where Russian River water is diverted and treated by riverbank filtration. This report is a compilation of the hydrologic and water-quality data collected from 14 Russian River sites, 8 tributary sites, 1 gravel-terrace pit site, 14 groundwater wells, and a wastewater treatment plant between the city of Ukiah and the town of Duncans Mills for the period August 2005 through October 2010. Field measurements included discharge, barometric pressure, dissolved oxygen, pH, specific conductance, temperature, and turbidity. All samples were analyzed for nutrients, major ions, trace metals, total and dissolved organic carbon, organic wastewater compounds, standard bacterial indicators, and the stable isotopes of hydrogen and oxygen. Standard bacterial indicators included total coliform, Escherichia coli, enterococci, and Clostridium perfringens for the period 2005 through 2007, and total and fecal coliform, and enterococci for 2010. In addition, enrichment of enterococci was performed on all surface-water samples collected during summer 2006, for detection of the human-associated enterococcal surface protein in Enterococcus faecium to assess the presence of sewage effluent in the Russian River. Other analyses included organic wastewater compounds of bed sediment samples collected from four Russian River sites during 2005; carbon-13 isotopic values of the dissolved inorganic carbon for surface-water and groundwater samples collected during 2006; human-use pharmaceuticals on Russian River samples collected during 2007 and 2010; and the radiogenic isotopes tritium and carbon-14 for groundwater samples collected during 2008.

Data Series↗
USGS2012

Water chemistry and electrical conductivity database for rivers in Yellowstone National Park, Wyoming

Chloride flux has been used to estimate heat flow in volcanic environments since the method was developed in New Zealand by Ellis and Wilson (1955). The method can be applied effectively at Yellowstone, because nearly all of the water discharged from its thermal features enters one of four major rivers (the Madison, Yellowstone, Snake, and Falls Rivers) that drain the park, and thus integration of chloride fluxes from all these rivers provides a means to monitor the total heat flow from the entire Yellowstone volcanic system (Fournier and others, 1976; Fournier, 1979). Fournier (1989) summarized the results and longterm heat-flow trends from Yellowstone, and later efforts that applied the chloride inventory method to estimate heat flow were described by Ingebritsen and others (2001) and Friedman and Norton (2007). Most recently, the U.S. Geological Survey (USGS), in conjunction with the National Park Service, has provided publicly accessible reports on solute flux, based on periodic sampling at selected locations (Hurwitz and others, 2007a,b). While these studies have provided a wealth of valuable data, winter travel restrictions and the great distances between sites present significant logistical challenges and have limited collection to a maximum of 28 samples per site annually. This study aims to quantify relations between solute concentrations (especially chloride) and electrical conductivity for several rivers in Yellowstone National Park (YNP), by using automated samplers and conductivity meters. Norton and Friedman (1985) found that chloride concentrations and electrical conductivity have a good correlation in the Falls, Snake, Madison, and Yellowstone Rivers. However, their results are based on limited sampling and hydrologic conditions and their relation with other solutes was not determined. Once the correlations are established, conductivity measurements can then be used as a proxy for chloride concentrations, thereby enabling continuous heat-flow estimation on a much finer timescale and at lower cost than is currently possible with direct sampling. This publication serves as a repository for all data collected during the course of the study from May 2010 through July 2011, but it does not include correlations between solutes and conductivity or recommendations for quantification of chloride through continuous electrical conductivity measurements. This will be the object of a future document.

Wyoming↗
USGS2006

Compilation of historical water-quality data for selected springs in Texas, by ecoregion

Springs are important hydrologic features in Texas. A database of about 2,000 historically documented springs and available spring-flow measurements previously has been compiled and published, but water-quality data remain scattered in published sources. This report by the U.S. Geological Survey, in cooperation with the Texas Parks and Wildlife Department, documents the compilation of data for 232 springs in Texas on the basis of a set of criteria and the development of a water-quality database for the selected springs. The selection of springs for compilation of historical water-quality data in Texas was made using existing digital and hard-copy data, responses to mailed surveys, selection criteria established by various stakeholders, geographic information systems, and digital database queries. Most springs were selected by computing the highest mean spring flows for each Texas level III ecoregion. A brief assessment of the water-quality data for springs in Texas shows that few data are available in the Arizona/New Mexico Mountains, High Plains, East Central Texas Plains, Western Gulf Coastal Plain, and South Central Plains ecoregions. Water-quality data are more abundant for the Chihuahuan Deserts, Edwards Plateau, and Texas Blackland Prairies ecoregions. Selected constituent concentrations in Texas springs, including silica, calcium, magnesium, sodium, potassium, strontium, sulfate, chloride, fluoride, nitrate (nitrogen), dissolved solids, and hardness (as calcium carbonate) are comparatively high in the Chihuahuan Deserts, Southwestern Tablelands, Central Great Plains, and Cross Timbers ecoregions, mostly as a result of subsurface geology. Comparatively low concentrations of selected constituents in Texas springs are associated with the Arizona/New Mexico Mountains, Southern Texas Plains, East Central Texas Plains, and South Central Plains ecoregions.

Texas↗
USGS2006

Geochemical data for mercury, methylmercury, and other constituents in sediments from Englebright Lake, California, 2002

This report presents geochemical data from two 2002 sampling campaigns conducted in Englebright Lake on the Yuba River in northern California. A deep coring campaign was done in May-June 2002 and a shallow sampling campaign was completed in October 2002. This work assessed the chemical composition of material deposited in the reservoir between 1940, the year Englebright Dam was completed, and 2002 as part of the Upper Yuba River Studies Program, an effort designed to evaluate the feasibility of introducing anadromous fish, including steelhead and spring-run Chinook salmon, upstream from Englebright Dam. Results of analyses of total mercury (HgT) in 444 subsamples, methylmercury (MeHg) in 243 subsamples, and other trace and major elements in 202 subsamples are presented. Data quality was evaluated on the basis of analyses of replicate pairs of subsamples, standard reference materials, blanks, and spike additions.Deep coring penetrated the full thickness of material deposited after 1940 at six locations in the reservoir; the cores reached a maximum depth of 32.8 meters below the reservoir floor. At the three deep coring sites closest to Englebright Dam, concentrations of HgT (dry basis) were consistently in the range of 100 to 500 ng/g (nanogram per gram), in sediment dominantly of silt size (median grain size of 0.004 to 0.063 mm [millimeter]). At the deep coring sites located farther upstream, the upper parts of the profile had lower concentrations of HgT, generally ranging from 2 to 100 ng/g, in sediment dominantly of sand size (median grain size from 0.063 to 2 mm). The lower part of the vertical profiles at three upstream coring sites had higher concentrations of HgT than the upper and middle parts of these profiles, and had finer median grain size. The highest median concentration of MeHg (1.1 ng/g) was in the top 2 cm (centimeter) of the shallow box cores. This vertical interval also had the highest value of the ratio of MeHg to HgT, 0.41 percent. Median concentrations of MeHg and median values of MeHg/HgT decreased systematically with depth from 0-4 to 4-8 to 8-12 cm in the shallow cores. However, similar systematic decreases were not observed at the meter scale in the deep cores of the MEM (MEthylMercury) series. The overall median of the ratio MeHg/HgT in the deep cores was 0.25 percent, not much less than the overall median value for the shallow cores (0.33 percent). Mercury-203 radiotracer divalent inorganic mercury (203Hg(II)) was used to determine microbial mercury-methylation potential rates for 11 samples collected from three reservoir locations and various depths in the sediment profile. For the five shallow mercury-methylation subsamples, ancillary geochemical parameters were assayed, including microbial sulfate reduction rates, sulfur speciation (sediment acid volatile sulfide, total reduced sulfur, and pore-water sulfate), iron speciation (sediment acid extractable iron(II), amorphous iron(III), crystalline iron(III) and pore-water iron(II)), pore-water chloride and dissolved organic carbon, and pH, oxidation-reduction potential (Eh) and whole-sediment organic content. The highest potential rates of microbial mercury methylation were measured in shallow (0 to 8 cm depth) sediments (5 to 30 nanograms of mercury per gram dry sediment per day), whereas potential rates for subsamples collected from depths greater than 500 cm were consistently below the detection limit of the radiotracer method (< 0.02 nanogram of mercury per gram dry sediment per day). Chemical analyses of trace and major elements in bed sediment are presented for 202 samples from deep cores from five locations in Englebright Lake. The mean values and standard deviations for selected trace elements were as follows (in micrograms per gram): antimony, 2.4 &plusmn; 1.6; arsenic, 69 &plusmn; 48; chromium, 134 &plusmn; 23; lead, 33 &plusmn; 25; and nickel, 87 &plusmn; 24. Concentrated samples of heavy-mineral grains, prepared using nine large-volume composite samples from

California↗
USGS2013

Archive of post-Hurricane Isabel coastal oblique aerial photographs collected during U.S. Geological Survey Field Activity 03CCH01 from Ocean City, Maryland, to Fort Caswell, North Carolina and Inland from Waynesboro to Redwood, Virginia, September 21 - 23, 2003

On September 21 - 23, 2003, the United States Geological Survey (USGS) conducted an oblique aerial photographic survey along the Atlantic coast from Ocean City, Md., to Fort Caswell, N.C., and inland oblique aerial photographic survey from Waynesboro to Redwood, Va., aboard a Navajo Piper twin-engine airplane. The coastal survey was conducted at an altitude of 500 feet (ft) and approximately 1,000 ft offshore. For the inland photos, the aircraft tried to stay approximately 500 ft above the terrain. These coastal photos were used to document coastal changes like beach erosion and overwash caused by Hurricane Isabel, while the inland photos looked for potential landslides caused by heavy rains. The photos may also be used as baseline data for future coastal change analysis. The USGS and the National Aeronautics and Space Administration (NASA) surveyed the impact zone of Hurricane Isabel to better understand the changes in vulnerability of the Nation’s coasts to extreme storms (Morgan, 2009). This report serves as an archive of photographs collected during the September 21 - 23, 2003, post-Hurricane Isabel coastal and inland oblique aerial survey along with associated survey maps, KML files, navigation files, digital Field Activity Collection System (FACS) logs, and Federal Geographic Data Committee (FGDC) metadata. Refer to the Acronyms page for expansions of all acronyms and abbreviations used in this report. The USGS St. Petersburg Coastal and Marine Science Center (SPCMSC) assigns a unique identifier to each cruise or field activity. For example, 03CCH01 tells us the data were collected in 2003 for the Coastal Change Hazards (CCH) study and the data were collected during the first field activity for that project in that calendar year. Refer to http://walrus.wr.usgs.gov/infobank/programs/html/definition/activity.html for a detailed description of the method used to assign the ID number. The photographs provided here are Joint Photographic Experts Group (JPEG) scanned images of the analog 35 millimeter (mm) color positive slides. The photograph locations are estimates of the location of the plane (see the Navigation page). The metadata values for photo creation time, GPS latitude, GPS longitude, GPS position (latitude and longitude), keywords, credit, artist, caption, copyright, and contact were added to each photograph's EXIF header using EXIFtool (Subino and others, 2012). Photographs can be opened directly with any JPEG-compatible image viewer by clicking on a thumbnail on the contact sheet, or, when viewing the Google Earth KML file, by clicking on the marker and then clicking on either the thumbnail or the link below the thumbnail. Nathaniel Plant (USGS - St. Petersburg, Fla.), and Ann Marie Ascough (formerly contracted at the USGS - St. Petersburg, Fla.) helped with the creation of KML files. To view the photos and survey maps, proceed to the Photos and Maps page.

Maryland, North Carolina, Virginia↗
USGS2015

Post-Hurricane Ivan coastal oblique aerial photographs collected from Crawfordville, Florida, to Petit Bois Island, Mississippi, September 17, 2004

The U.S. Geological Survey (USGS) conducts baseline and storm response photography missions to document and understand the changes in vulnerability of the Nation's coasts to extreme storms. On September 17, 2004, the USGS conducted an oblique aerial photographic survey from Crawfordville, Florida, to Petit Bois Island, Mississippi aboard a Piper Navajo Chieftain (aircraft) at an altitude of 500 feet (ft) and approximately 1,000 ft offshore. This mission was flown to collect post-Hurricane Ivan data for assessing incremental changes in the beach and nearshore area since the last survey in 2001, and the data can be used in the assessment of future coastal change. The images provided in this report are Joint Photographic Experts Group (JPEG) images. ExifTool was used to add the following to the header of each photo: time of collection, Global Positioning System (GPS) latitude, GPS longitude, keywords, credit, artist (photographer), caption, copyright, and contact information. The photograph locations are an estimate of the position of the aircraft and do not indicate the location of any feature in the images. These photographs document the state of the barrier islands and other coastal features at the time of the survey. Pages containing thumbnail images of the photographs, referred to as contact sheets, were created in 5-minute segments of flight time. These segments can be found on the Photos and Maps page. The photographs can be opened directly with any JPEG-compatible image viewer by clicking on a thumbnail on the contact sheet. Table 1 provides detailed information about the GPS location, image name, date, and time for each of the 3,381 photographs taken, along with links to each photograph. The photographs are organized into segments, also referred to as contact sheets, and represent approximately 5 minutes of flight time. In addition to the photographs, a Google Earth Keyhole Markup Language (KML) file is provided, which can be used to view the images by clicking on the marker and then clicking on either the thumbnail or the link above the thumbnail. The KML files were created using the photographic navigation files.

Alabama, Florida, Mississippi↗
USGS2009

Bromide, Chloride, and Sulfate Concentrations, and Specific Conductance, Lake Texoma, Texas and Oklahoma, 2007-08

The U.S. Geological Survey, in cooperation with the City of Dallas Water Utilities Division, collected water-quality data from 11 sites on Lake Texoma, a reservoir on the Texas-Oklahoma border, during April 2007-September 2008. At 10 of the sites, physical properties (depth, specific conductance, pH, temperature, dissolved oxygen, and alkalinity) were measured and samples were collected for analysis of selected dissolved constituents (bromide, calcium, magnesium, potassium, sodium, carbonate, bicarbonate, chloride, and sulfate); at one site, only physical properties were measured. The primary constituent of interest was bromide. Bromate can form when ozone is used to disinfect raw water containing bromide, and bromate is a suspected human carcinogen. Chloride and sulfate were of secondary interest. Only the analytical results for bromide, chloride, sulfate, and measured specific conductance are discussed in this report. Median dissolved bromide concentrations ranged from 0.28 to 0.60 milligrams per liter. The largest median dissolved bromide concentration (0.60 milligram per liter at site 11) was from the Red River arm of Lake Texoma. Dissolved bromide concentrations generally were larger in the Red River arm of Lake Texoma than in the Washita arm of the lake. Median dissolved chloride concentrations were largest in the Red River arm of Lake Texoma at site 11 (431 milligrams per liter) and smallest at site 8 (122 milligrams per liter) in the Washita arm. At site 11 in the Red River arm, the mean and median chloride concentrations exceeded the secondary maximum contaminant level of 300 milligrams per liter for chloride established by the 'Texas Surface Water Quality Standards' for surface-water bodies designated for the public water supply use. Median dissolved sulfate concentrations ranged from 182 milligrams per liter at site 4 in the Big Mineral arm to 246 milligrams per liter at site 11 in the Red River arm. None of the mean or median sulfate concentrations exceeded the secondary maximum contaminant level of 300 milligrams per liter. Median specific conductance measurements at sites ranged from 1,120 microsiemens per centimeter at site 8 in the Washita arm to 2,100 microsiemens per centimeter in the Red River arm. The spatial distribution of specific conductance in Lake Texoma was similar to that of bromide and chloride, with larger specific conductance values in the Red River arm compared to those in the Washita arm.

Data Series↗
USGS2016

Post-Hurricane Irene coastal oblique aerial photographs collected from Ocracoke Inlet, North Carolina, to Virginia Beach, Virginia, August 30-31, 2011

The U.S. Geological Survey (USGS), as part of the National Assessment of Coastal Change Hazards project, conducts baseline and storm-response photography missions to document and understand the changes in vulnerability of the Nation's coasts to extreme storms (Morgan, 2009). On August 30-31, 2011, the USGS conducted an oblique aerial photographic survey from Ocracoke Inlet, North Carolina, to Virginia Beach, Virginia, aboard a Piper Navajo Chieftain (aircraft) at an altitude of 500 feet (ft) and approximately 1,200 ft offshore. This mission was flown to collect post-Hurricane Irene data for assessing incremental changes in the beach and nearshore area since the last survey, flown in May 2008, and the data can be used in the assessment of future coastal change. The photographs provided in this report are Joint Photographic Experts Group (JPEG) images. ExifTool was used to add the following to the header of each photo: time of collection, Global Positioning System (GPS) latitude, GPS longitude, keywords, credit, artist (photographer), caption, copyright, and contact information. The photograph locations are an estimate of the position of the aircraft at the time the photograph was taken and do not indicate the location of any feature in the images (see the Navigation Data page). These photographs document the state of the barrier islands and other coastal features at the time of the survey. Pages containing thumbnail images of the photographs, referred to as contact sheets, were created in 5-minute segments of flight time. These segments can be found on the Photos and Maps page. Photographs can be opened directly with any JPEG-compatible image viewer by clicking on a thumbnail on the contact sheet. Table 1 provides detailed information about the GPS location, image name, date, and time for each of the 2,688 photographs that were taken along with links to each photograph. In addition to the photographs, a Google Earth Keyhole Markup Language (KML) file is provided and can be used to view the images by clicking on the marker and then clicking on either the thumbnail or the link above the thumbnail. The KML also shows the track of Hurricane Irene. The KML files were created using the photographic navigation files. These KML file(s) can be found in the kml folder.

North Carolina, Virginia↗
USGS2008

Continuous Temperature and Water-Level Data Collected for a Heat Tracer Study on a Selected Reach of Tri-State Canal, Western Nebraska, 2007

The water supply in parts of the North Platte River Basin in the Nebraska Panhandle has been designated as fully appropriated or over appropriated by the Nebraska Department of Natural Resources. Recent legislation (LB 962) requires the North Platte Natural Resources District and the Nebraska Department of Natural Resources to develop an Integrated Management Plan to balance ground- and surface-water supply and demand within the North Platte Natural Resources District. For a ground-water-flow model to accurately simulate existing or future ground-water and surface-water conditions, accurate estimates of specific input variables such as streambed conductance or canal-seepage rates are required. As of 2008, the values input into ground-water models were estimated on the basis of interpreted lithology from test holes and geophysical surveys. Often, contrasts of several orders of magnitude exist for streambed conductance among the various sediment textures present locally, and thin, near-surface layers of fine sediment can clog the streambed, substantially reducing conductance. To accurately quantify the rates of leakage from irrigation canals and estimate ground-water recharge, the U.S. Geological Survey, in cooperation with the North Platte Natural Resources District, collected continuous temperature and water-level data to use heat as a tracer for a selected reach of Tri-State Canal west of Scottsbluff, Nebraska. Continuous records of subsurface temperature, ground-water level, canal stage, and water temperature, and sediment core data are presented in this report. Subsurface temperature was monitored at four vertical sensor arrays of thermocouples installed at various depths beneath the canal bed from March through September 2007. Canal stage and water temperature were measured from June to September 2007. Ground-water level was recorded continuously in an observation well drilled near the subsurface temperature monitoring site. These data sets were collected for use as inputs for a computer model to estimate the vertical hydraulic conductivity. Before the initiation of flow, diurnal variations in subsurface temperature occurred because of daytime heating and nighttime cooling of bed sediment. Flow in Tri-State Canal was first detected on June 16 at the monitoring site as a disruption in the temperature signal in the shallowest thermocouple in all four vertical sensor arrays. This disruption in the temperature pattern occurred in deeper thermocouples at slightly later times during the rapid infiltration of canal water. The ground-water level began to rise approximately 23 hours after flow was first detected at the monitoring site. Canal stage rose for 7 days until the maximum flow capacity of the canal was approached on June 23, 2007. Measured water temperatures ranged from 18 to 25 degrees Celsius (C) while the canal was flowing near maximum capacity. Small diurnal variations of 1.0 to 1.5 degrees C in water temperature were recorded during this time. Measured ground-water levels rose constantly during the entire irrigation season until levels peaked on September 3, 2007, 3 days after diversions to Tri-State Canal ceased.

Data Series↗
USGS2015

Hydrogeologic data and water-quality data from a thick unsaturated zone at a proposed wastewater-treatment facility site, Yucca Valley, San Bernardino County, California, 2008-11

The Hi-Desert Water District, in the community of Yucca Valley, California, is considering constructing a wastewater-treatment facility and using the reclaimed water to recharge the aquifer system through surface spreading. The Hi-Desert Water District is concerned with possible effects of this recharge on water quality in the underlying groundwater system; therefore, an unsaturated-zone monitoring site was constructed by the U.S. Geological Survey (USGS) to characterize the unsaturated zone, monitor a pilot-scale recharge test, and, ultimately, to monitor the flow of reclaimed water to the water table once the treatment facility is constructed. In June and July 2008, a borehole (YVUZ-5) was drilled by the USGS through the unsaturated zone in the vicinity of the proposed wastewater-treatment facility site by using an overburden drilling method. In addition to a variety of unsaturated-zone instrumentation, an observation well screened near the water table was installed in the borehole. The drilling procedures, lithologic and geophysical data, construction details, physical properties of unsaturated alluvial deposits, and instrumentation installed in YVUZ-5 are described in this report. Core material was analyzed for bulk-density, porosity, effective porosity, volumetric water content, residual water content, saturation, effective saturation, matric-potential, and saturated hydraulic conductivity. Concentrations of soluble anions, including bromide, chloride, fluoride, sulfate, nitrate, nitrite, phosphate, and orthophosphate, in unsaturated-zone sediment and dissolved in unsaturated-zone water were determined by analyzing water extracted from drill-cutting material. A 0.1-acre pilot-scale infiltration pond was constructed in the vicinity of YVUZ-5. Water was applied to the pond over a period of about 8 months and allowed to infiltrate into the underlying unsaturated zone. Data were collected on chemical and isotopic composition of the groundwater, unsaturated-zone water, and infiltration pond water before, during, and after infiltration of water from the constructed pond. Selected drill cuttings and core samples collected during drilling were analyzed for the presence or absence of denitrifying and nitrate-reducing bacteria. Water levels in the observation well ranged from about 367 to 370 feet below land surface during the period of the study. Measured saturated hydraulic conductivity of core material ranged from 2.1 to 11.0 feet per day. Average vertical infiltration rates in the pilot-scale infiltration pond ranged from 0.7 to 2.4 feet per day. Both denitrifying and nitrate-reducing bacteria were present in drill cutting material in most probable numbers ranging from below detection limits to 2,400,000 for denitrifying and to 93,000 for nitrate-reducing bacteria.

California↗